Andi,
Your PI has requested the Goldner's trichrome stain because it provides a stark
contrast between the green (light-green SF yellowish) stained mineralized
component of bone and the red (acid fuchsin-ponceau) stained newly formed
unmineralized bone-like dense collagen fibers (osteoid) that will eventually
mature and mineralize to form bone. Now if you subject mineralized bone to an
acid solution, the process of demineralization begins and acts to remove the
mineral (calcium and phosphorus) content. The acid will also have an effect on
the soft tissue components, but the effect varies depending upon the acid
concentration and certain properties of tissues. Nevertheless, the most notable
effect of acid decalcification will be seen as a change in the density of bone
and demonstrated by stain uptake and penetration.
If you have to demineralize your bone in order to cut sections because you do
not have the capabilities to cut undemineralized bone, then you need a stain
that provides the best contrast for this now demineralized state of bone. Once
the bone has been decalcified, you essentially have now demineralized bone
(less dense) and still unmineralized bone-like collagen fibers, all of which
will now be contrasted differently with the Goldner's stain. While an HE can
be used to distinguish bone that was once mineralized (old bone) from
unmineralized bone-like collagen fibers (osteoid or newly forming bone),
there is not enough of a stark contrast and especially if you are wanting to
use some form of image analysis software. With that said, the best stain then
to use in this situation is a Masson's trichrome where the bone stains blue
(aniline blue) and the osteoid stains red (biebrich-scarlet).
With regards to the demineralization method, the EDTA will take too long to
arrive at the same result that a simple 5% formic acid will provide. Also, your
sections will be cut at a standard 5 microns.
Hope this information helps you to get what you need and understand a little
more of why you need what you need! :)
Best Regards,
Jack
From: algra...@email.arizona.edu
To: histonet@lists.utsouthwestern.edu
Date: Thu, 8 Mar 2012 08:00:58 -0800
Subject: [Histonet] Goldner's Trichrome for Osteoid
Hopefully a hard tissue guru is out there and can help with this.
A PI here is asking about doing a Goldner's stain on mouse femur. I'm not set
up to cut sections of undecalcified bone so my questions are:
1. can this stain be done successfully on decalcified bone?
2. if so, what type of decal should be used - EDTA?
3. I have googled the stain but didn't see what the preferred thickness was for
this stain.
Need this info fairly soon! The bones are on the way.
Thanks!!!
Andi G.
___ Histonet mailing list
Histonet@lists.utsouthwestern.edu
http://lists.utsouthwestern.edu/mailman/listinfo/histonet
___
Histonet mailing list
Histonet@lists.utsouthwestern.edu
http://lists.utsouthwestern.edu/mailman/listinfo/histonet