[hugin-ptx] Re: Requires HUGIN Server Process expert
Carlos, thank you for your answer! Let me explain the situation once again and answer the questions you asked. Forgive me if i'll miss some important details, as i said, i'm not expert in this area, so feel free to ask for information. Earlier when we used our old device (that's one our own design), we put in server Hugin .opt that we had got from desktop Hugin after stitching panoramas of this device. And thanks to that .opt we got good results. That device had only one camera module and was rotated by panohead (another one our own design). And that stitching was pretty good. Then we've made our custom assembly, that has 4 5MP camera models with fisheye lens. There are 60 degrees between the central axis of the lens of horisontal and vertical pairs of camera modules. <https://lh3.googleusercontent.com/-KLx3ulYzNw4/VjcvvjVmE5I/APY/-AGgQRDQ4ok/s1600/10562_44189746_3_4.jpg> Assemble doesn't imply a panohead, all 4 modules are placed as close to each other as it's possible and are rotated on monopod around the least point of parallax. We've chose this way, 'cause it make shooting process faster. We tried to use old .opt, but it didn't work well. That's why we are searching for hugin expert. So if this information helps you to get good results, we'll glad to work with you, and we are waiting for your proposals about the cost of co-operation and timing of your work. воскресенье, 25 октября 2015 г., 18:46:38 UTC+3 пользователь Lada написал: > > Hello! > > We are looking for the HUGIN Server Process expert. > Previously we liked results of HUGIN web service API work, but after > changing the device that takes pictures for panoramas, panoramas stitch > became very bad. Now the device consist of 4 camera module located as close > to each other as possible. When photographer press a button all 4 cameras > take a picture. After that, photographer turns the device 120 degrees and > pushes a button (+ 4 pictures), rotates 120 and presses again (+ 4 > pictures). Thus we have 12 pictures to stitch the panorama. > Although cameras are positioned as close as possible, there are problems > with parallax. Because of this, problems with detecting control points > exist. However, other software (Autopano) gives good results. > We are looking for someone who can help us adjust HUGIN api to get results > not worse than we are now receiving from the Autopano. > I attached a link to 5 folders with source pictures for the panoramas and > the results we got when had stitched them with the Autopano. > https://drive.google.com/drive/u/1/folders/0B7LQ8sYQPdl7RXhLTWpNWEt1LTg > > Please try to make panoramas, and if you find the parameters that can be > set in HUGIN Server Process for good automatically stitching, contact me by > e-mail (), we will be happy to cooperate with you. Please write in a > letter to the desired reward, what time you'll need and attach the results > of stitching that you will got. > -- A list of frequently asked questions is available at: http://wiki.panotools.org/Hugin_FAQ --- You received this message because you are subscribed to the Google Groups "hugin and other free panoramic software" group. To unsubscribe from this group and stop receiving emails from it, send an email to hugin-ptx+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/hugin-ptx/bf3ea0e9-e61f-46fc-9af3-2a63b01748a9%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
[hugin-ptx] Re: Requires HUGIN Server Process expert
Anyway thank you for try! Would you suggest, what is the cause of failure? воскресенье, 25 октября 2015 г., 18:46:38 UTC+3 пользователь Lada написал: > > Hello! > > We are looking for the HUGIN Server Process expert. > Previously we liked results of HUGIN web service API work, but after > changing the device that takes pictures for panoramas, panoramas stitch > became very bad. Now the device consist of 4 camera module located as close > to each other as possible. When photographer press a button all 4 cameras > take a picture. After that, photographer turns the device 120 degrees and > pushes a button (+ 4 pictures), rotates 120 and presses again (+ 4 > pictures). Thus we have 12 pictures to stitch the panorama. > Although cameras are positioned as close as possible, there are problems > with parallax. Because of this, problems with detecting control points > exist. However, other software (Autopano) gives good results. > We are looking for someone who can help us adjust HUGIN api to get results > not worse than we are now receiving from the Autopano. > I attached a link to 5 folders with source pictures for the panoramas and > the results we got when had stitched them with the Autopano. > https://drive.google.com/drive/u/1/folders/0B7LQ8sYQPdl7RXhLTWpNWEt1LTg > > Please try to make panoramas, and if you find the parameters that can be > set in HUGIN Server Process for good automatically stitching, contact me by > e-mail (), we will be happy to cooperate with you. Please write in a > letter to the desired reward, what time you'll need and attach the results > of stitching that you will got. > -- A list of frequently asked questions is available at: http://wiki.panotools.org/Hugin_FAQ --- You received this message because you are subscribed to the Google Groups "hugin and other free panoramic software" group. To unsubscribe from this group and stop receiving emails from it, send an email to hugin-ptx+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/hugin-ptx/6922ae6f-d549-4863-9c3a-241b453a5bee%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
[hugin-ptx] Re: Requires HUGIN Server Process expert
Speaking about folders - i've caught the problem ) Just wait about 15-20 sec and photos will appear. воскресенье, 25 октября 2015 г., 18:46:38 UTC+3 пользователь Lada написал: > > Hello! > > We are looking for the HUGIN Server Process expert. > Previously we liked results of HUGIN web service API work, but after > changing the device that takes pictures for panoramas, panoramas stitch > became very bad. Now the device consist of 4 camera module located as close > to each other as possible. When photographer press a button all 4 cameras > take a picture. After that, photographer turns the device 120 degrees and > pushes a button (+ 4 pictures), rotates 120 and presses again (+ 4 > pictures). Thus we have 12 pictures to stitch the panorama. > Although cameras are positioned as close as possible, there are problems > with parallax. Because of this, problems with detecting control points > exist. However, other software (Autopano) gives good results. > We are looking for someone who can help us adjust HUGIN api to get results > not worse than we are now receiving from the Autopano. > I attached a link to 5 folders with source pictures for the panoramas and > the results we got when had stitched them with the Autopano. > https://drive.google.com/drive/u/1/folders/0B7LQ8sYQPdl7RXhLTWpNWEt1LTg > > Please try to make panoramas, and if you find the parameters that can be > set in HUGIN Server Process for good automatically stitching, contact me by > e-mail (), we will be happy to cooperate with you. Please write in a > letter to the desired reward, what time you'll need and attach the results > of stitching that you will got. > -- A list of frequently asked questions is available at: http://wiki.panotools.org/Hugin_FAQ --- You received this message because you are subscribed to the Google Groups "hugin and other free panoramic software" group. To unsubscribe from this group and stop receiving emails from it, send an email to hugin-ptx+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/hugin-ptx/630b5736-7cc3-4862-98ac-b1e66ad8aff6%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
[hugin-ptx] Re: Requires HUGIN Server Process expert
Unfortunately, we cann't change device assembly now, although we are working in this direction to make parallax less :) I checked the folders, they are ok. Kindly please, try again. Speaking about approach that you've suggested: "- try to set a different lens for each image, so the optimization can set different lens values for each. If you get a mess, try to set different lens only after previous optimizations- try to make progressive optimizations, like first y, p, r, then y, p, r, v, then y, p, r, b, then y, p, r, v, b, then maybe try to set control points again, then optimize Everything without translation" I'm not very good in Hugin optimisation ) Earlier we had .pto that worked very well untill we changed device. So now we need Hugin expert who can adjust Hugin api. About stitching workflow: i can show you autopano settings, thanks to which we get good results. Hope, it'll help. <https://lh3.googleusercontent.com/-3n3AL_JusUM/VjDOJPBwakI/AOc/y6W5Zx4xRWI/s1600/detection.jpg> <https://lh3.googleusercontent.com/-oWofZ1fGTPM/VjDOOU-8DjI/AOk/M3Wi9B3cmMA/s1600/general.jpg> <https://lh3.googleusercontent.com/-2K6xvDdIWho/VjDOStG8SuI/AOs/cMVbCq0RtbM/s1600/images.jpg> <https://lh3.googleusercontent.com/-fXFNt7lnzAI/VjDOWqRjjzI/AO0/rP2QaM1Focc/s1600/optimization.jpg> <https://lh3.googleusercontent.com/-rtXYKbvW8vo/VjDObe2qogI/AO8/iXwWz3c2lCg/s1600/panorama.jpg> <https://lh3.googleusercontent.com/-xh1HZTSFbWA/VjDOermb_VI/APE/14jkITLyfhI/s1600/render.jpg> воскресенье, 25 октября 2015 г., 18:46:38 UTC+3 пользователь Lada написал: > > Hello! > > We are looking for the HUGIN Server Process expert. > Previously we liked results of HUGIN web service API work, but after > changing the device that takes pictures for panoramas, panoramas stitch > became very bad. Now the device consist of 4 camera module located as close > to each other as possible. When photographer press a button all 4 cameras > take a picture. After that, photographer turns the device 120 degrees and > pushes a button (+ 4 pictures), rotates 120 and presses again (+ 4 > pictures). Thus we have 12 pictures to stitch the panorama. > Although cameras are positioned as close as possible, there are problems > with parallax. Because of this, problems with detecting control points > exist. However, other software (Autopano) gives good results. > We are looking for someone who can help us adjust HUGIN api to get results > not worse than we are now receiving from the Autopano. > I attached a link to 5 folders with source pictures for the panoramas and > the results we got when had stitched them with the Autopano. > https://drive.google.com/drive/u/1/folders/0B7LQ8sYQPdl7RXhLTWpNWEt1LTg > > Please try to make panoramas, and if you find the parameters that can be > set in HUGIN Server Process for good automatically stitching, contact me by > e-mail (), we will be happy to cooperate with you. Please write in a > letter to the desired reward, what time you'll need and attach the results > of stitching that you will got. > -- A list of frequently asked questions is available at: http://wiki.panotools.org/Hugin_FAQ --- You received this message because you are subscribed to the Google Groups "hugin and other free panoramic software" group. To unsubscribe from this group and stop receiving emails from it, send an email to hugin-ptx+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/hugin-ptx/f739487a-ba70-411a-9a53-8cbc80f1a73d%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
[hugin-ptx] Re: Requires HUGIN Server Process expert
I hope, this will help: this is a principle of camera work: <https://lh3.googleusercontent.com/-tpAeu8XjExU/Vi98xys6B0I/AOI/zkS-fFj_exY/s1600/%25D1%2580%25D0%25B0%25D0%25BF%25D0%25B8%25D1%2580%25D0%25B0%2B%25D0%25BF%25D1%2580%25D0%25B8%25D0%25BD%25D1%2586%25D0%25B8%25D0%25BF%2B%25D1%2580%25D0%25B0%25D0%25B1%25D0%25BE%25D1%2582%25D1%258B.jpg> So we cann't use panohead. Just adjust HUGIN api with settings, that allow to make process automatic We put in these settings: Lens type: full frame fisheye Focal length: 15 mm Another data are default воскресенье, 25 октября 2015 г., 18:46:38 UTC+3 пользователь Lada написал: > > Hello! > > We are looking for the HUGIN Server Process expert. > Previously we liked results of HUGIN web service API work, but after > changing the device that takes pictures for panoramas, panoramas stitch > became very bad. Now the device consist of 4 camera module located as close > to each other as possible. When photographer press a button all 4 cameras > take a picture. After that, photographer turns the device 120 degrees and > pushes a button (+ 4 pictures), rotates 120 and presses again (+ 4 > pictures). Thus we have 12 pictures to stitch the panorama. > Although cameras are positioned as close as possible, there are problems > with parallax. Because of this, problems with detecting control points > exist. However, other software (Autopano) gives good results. > We are looking for someone who can help us adjust HUGIN api to get results > not worse than we are now receiving from the Autopano. > I attached a link to 5 folders with source pictures for the panoramas and > the results we got when had stitched them with the Autopano. > https://drive.google.com/drive/u/1/folders/0B7LQ8sYQPdl7RXhLTWpNWEt1LTg > > Please try to make panoramas, and if you find the parameters that can be > set in HUGIN Server Process for good automatically stitching, contact me by > e-mail (), we will be happy to cooperate with you. Please write in a > letter to the desired reward, what time you'll need and attach the results > of stitching that you will got. > -- A list of frequently asked questions is available at: http://wiki.panotools.org/Hugin_FAQ --- You received this message because you are subscribed to the Google Groups "hugin and other free panoramic software" group. To unsubscribe from this group and stop receiving emails from it, send an email to hugin-ptx+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/hugin-ptx/6b11f0da-85a2-4df8-bc49-241f159f361e%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
[hugin-ptx] Re: Requires HUGIN Server Process expert
I will be grateful for any comments, even if you tried and didn't get satisfactory results воскресенье, 25 октября 2015 г., 18:46:38 UTC+3 пользователь Lada написал: > > Hello! > > We are looking for the HUGIN Server Process expert. > Previously we liked results of HUGIN web service API work, but after > changing the device that takes pictures for panoramas, panoramas stitch > became very bad. Now the device consist of 4 camera module located as close > to each other as possible. When photographer press a button all 4 cameras > take a picture. After that, photographer turns the device 120 degrees and > pushes a button (+ 4 pictures), rotates 120 and presses again (+ 4 > pictures). Thus we have 12 pictures to stitch the panorama. > Although cameras are positioned as close as possible, there are problems > with parallax. Because of this, problems with detecting control points > exist. However, other software (Autopano) gives good results. > We are looking for someone who can help us adjust HUGIN api to get results > not worse than we are now receiving from the Autopano. > I attached a link to 5 folders with source pictures for the panoramas and > the results we got when had stitched them with the Autopano. > https://drive.google.com/drive/u/1/folders/0B7LQ8sYQPdl7RXhLTWpNWEt1LTg > > Please try to make panoramas, and if you find the parameters that can be > set in HUGIN Server Process for good automatically stitching, contact me by > e-mail (), we will be happy to cooperate with you. Please write in a > letter to the desired reward, what time you'll need and attach the results > of stitching that you will got. > -- A list of frequently asked questions is available at: http://wiki.panotools.org/Hugin_FAQ --- You received this message because you are subscribed to the Google Groups "hugin and other free panoramic software" group. To unsubscribe from this group and stop receiving emails from it, send an email to hugin-ptx+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/hugin-ptx/287eca75-6e81-4a16-b64a-0969fe145200%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
[hugin-ptx] Re: Requires HUGIN Server Process expert
sorry, e-mail is l...@e42.guru воскресенье, 25 октября 2015 г., 18:46:38 UTC+3 пользователь Lada написал: > > Hello! > > We are looking for the HUGIN Server Process expert. > Previously we liked results of HUGIN web service API work, but after > changing the device that takes pictures for panoramas, panoramas stitch > became very bad. Now the device consist of 4 camera module located as close > to each other as possible. When photographer press a button all 4 cameras > take a picture. After that, photographer turns the device 120 degrees and > pushes a button (+ 4 pictures), rotates 120 and presses again (+ 4 > pictures). Thus we have 12 pictures to stitch the panorama. > Although cameras are positioned as close as possible, there are problems > with parallax. Because of this, problems with detecting control points > exist. However, other software (Autopano) gives good results. > We are looking for someone who can help us adjust HUGIN api to get results > not worse than we are now receiving from the Autopano. > I attached a link to 5 folders with source pictures for the panoramas and > the results we got when had stitched them with the Autopano. > https://drive.google.com/drive/u/1/folders/0B7LQ8sYQPdl7RXhLTWpNWEt1LTg > > Please try to make panoramas, and if you find the parameters that can be > set in HUGIN Server Process for good automatically stitching, contact me by > e-mail (), we will be happy to cooperate with you. Please write in a > letter to the desired reward, what time you'll need and attach the results > of stitching that you will got. > -- A list of frequently asked questions is available at: http://wiki.panotools.org/Hugin_FAQ --- You received this message because you are subscribed to the Google Groups "hugin and other free panoramic software" group. To unsubscribe from this group and stop receiving emails from it, send an email to hugin-ptx+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/hugin-ptx/62dad208-c5bd-4b2c-bacc-df35ae10d3b5%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
[hugin-ptx] Requires HUGIN Server Process expert
Hello! We are looking for the HUGIN Server Process expert. Previously we liked results of HUGIN web service API work, but after changing the device that takes pictures for panoramas, panoramas stitch became very bad. Now the device consist of 4 camera module located as close to each other as possible. When photographer press a button all 4 cameras take a picture. After that, photographer turns the device 120 degrees and pushes a button (+ 4 pictures), rotates 120 and presses again (+ 4 pictures). Thus we have 12 pictures to stitch the panorama. Although cameras are positioned as close as possible, there are problems with parallax. Because of this, problems with detecting control points exist. However, other software (Autopano) gives good results. We are looking for someone who can help us adjust HUGIN api to get results not worse than we are now receiving from the Autopano. I attached a link to 5 folders with source pictures for the panoramas and the results we got when had stitched them with the Autopano. https://drive.google.com/drive/u/1/folders/0B7LQ8sYQPdl7RXhLTWpNWEt1LTg Please try to make panoramas, and if you find the parameters that can be set in HUGIN Server Process for good automatically stitching, contact me by e-mail (), we will be happy to cooperate with you. Please write in a letter to the desired reward, what time you'll need and attach the results of stitching that you will got. -- A list of frequently asked questions is available at: http://wiki.panotools.org/Hugin_FAQ --- You received this message because you are subscribed to the Google Groups "hugin and other free panoramic software" group. To unsubscribe from this group and stop receiving emails from it, send an email to hugin-ptx+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/hugin-ptx/cb3cf40c-3d54-4aa9-8e83-f4852cce0cca%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
[hugin-ptx] Re: Settings for panoramas inside buildings
Thank you! We will try to use your advices. четверг, 24 сентября 2015 г., 12:19:59 UTC+3 пользователь Lada написал: > > Hello! > > We make panoramas inside buildings and due to assembly of our device have > some problems with parallax. > What settings should we set to get the best results with these photos? May > be anyone ran into the same problem? > > As example i add results which we've got in Autopano > > > https://drive.google.com/folderview?id=0BymDmdEBvfGHLWhtQUpUdWRTd2c&usp=sharing > -- A list of frequently asked questions is available at: http://wiki.panotools.org/Hugin_FAQ --- You received this message because you are subscribed to the Google Groups "hugin and other free panoramic software" group. To unsubscribe from this group and stop receiving emails from it, send an email to hugin-ptx+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/hugin-ptx/40e01880-d37c-4a9a-900e-fabee368e2a7%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
[hugin-ptx] Re: Settings for panoramas inside buildings
But if i want to automate this process to prevent manual intervention, how can i increase an amount of control points? Which settings are necessary? четверг, 24 сентября 2015 г., 12:19:59 UTC+3 пользователь Lada написал: > > Hello! > > We make panoramas inside buildings and due to assembly of our device have > some problems with parallax. > What settings should we set to get the best results with these photos? May > be anyone ran into the same problem? > > As example i add results which we've got in Autopano > > > https://drive.google.com/folderview?id=0BymDmdEBvfGHLWhtQUpUdWRTd2c&usp=sharing > -- A list of frequently asked questions is available at: http://wiki.panotools.org/Hugin_FAQ --- You received this message because you are subscribed to the Google Groups "hugin and other free panoramic software" group. To unsubscribe from this group and stop receiving emails from it, send an email to hugin-ptx+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/hugin-ptx/9fd7f351-848c-4841-aa67-0e69d94aadce%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
[hugin-ptx] Settings for panoramas inside buildings
Hello! We make panoramas inside buildings and due to assembly of our device have some problems with parallax. What settings should we set to get the best results with these photos? May be anyone ran into the same problem? As example i add results which we've got in Autopano https://drive.google.com/folderview?id=0BymDmdEBvfGHLWhtQUpUdWRTd2c&usp=sharing -- A list of frequently asked questions is available at: http://wiki.panotools.org/Hugin_FAQ --- You received this message because you are subscribed to the Google Groups "hugin and other free panoramic software" group. To unsubscribe from this group and stop receiving emails from it, send an email to hugin-ptx+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/hugin-ptx/bf78f9c5-8149-4ea9-958c-3de02e59a3fc%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
