Re: [hugin-ptx] Re: Default Settings
Should anyone be interested, this is a script developed for stitching (mosaic) images in a folder prior to tidying up rotation, fine-tuning CPs, adjusting FoV and stitching in Hugin. #!/bin/bash pto_gen -p 0 -f 40.7 -c 200,5560,133,3707 -o project.pto *.tif cpfind --multirow --fullscale --sieve1width 12 --sieve1height 8 --sieve2width 4 --sieve2height 4 --sieve2size 1 -o project_cp.pto project.pto pto_var --set=r=90 --opt=TrX,TrY -o project_XY.pto project_cp.pto autooptimiser -n -o project_XY.pto project_XY.pto pto_var --opt=y,y0,p,p0,TrZ -o project_ypZ.pto project_XY.pto autooptimiser -n -o project_ypZ.pto project_ypZ.pto pto_var --opt=y,y0,p,p0,TrX,TrY,TrZ -o project_ypXYZ.pto project_ypZ.pto autooptimiser -n -o project_ypXYZ.pto project_ypXYZ.pto cpclean --fast -o project_clean.pto project_cp.pto pto_var --opt=y,y0,p,p0,TrX,TrY,TrZ -o project_ypXYZ.pto project_ypXYZ.pto autooptimiser -n -o project_ypXYZ.pto project_ypXYZ.pto pano_modify --projection=0 --fov=AUTO -o finished.pto project_ypXYZ.pto On Friday, 29 April 2022 at 13:05:52 UTC+1 Michael Perry wrote: > Thank you, that works simply and perfectly > > > On Thursday, 28 April 2022 at 16:30:21 UTC+1 T. Modes wrote: > >> michae...@mac.com schrieb am Donnerstag, 28. April 2022 um 12:23:49 >> UTC+2: >> >>> pto_var: can anyone tell me whether there is a way to specify, for >>> example, optimising yaw of all images including the anchor without having >>> to specify each image? >>> >>> Thus, some sort of: >>> --opt=yALL >>> rather than >>> --opt=y0,y1,y2,y3,y4… >>> >> >> Assuming anchor is first image (image index 0): >> pto_var --opt=y,y0 >> >> -- A list of frequently asked questions is available at: http://wiki.panotools.org/Hugin_FAQ --- You received this message because you are subscribed to the Google Groups "hugin and other free panoramic software" group. To unsubscribe from this group and stop receiving emails from it, send an email to hugin-ptx+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/hugin-ptx/86d945cd-fa6a-4119-bfaa-80d43451cd9dn%40googlegroups.com.
Re: [hugin-ptx] Re: Default Settings
Thank you, that works simply and perfectly On Thursday, 28 April 2022 at 16:30:21 UTC+1 T. Modes wrote: > michae...@mac.com schrieb am Donnerstag, 28. April 2022 um 12:23:49 UTC+2: > >> pto_var: can anyone tell me whether there is a way to specify, for >> example, optimising yaw of all images including the anchor without having >> to specify each image? >> >> Thus, some sort of: >> --opt=yALL >> rather than >> --opt=y0,y1,y2,y3,y4… >> > > Assuming anchor is first image (image index 0): > pto_var --opt=y,y0 > > -- A list of frequently asked questions is available at: http://wiki.panotools.org/Hugin_FAQ --- You received this message because you are subscribed to the Google Groups "hugin and other free panoramic software" group. To unsubscribe from this group and stop receiving emails from it, send an email to hugin-ptx+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/hugin-ptx/bfdfe96c-2b46-467c-848c-d93423634509n%40googlegroups.com.
Re: [hugin-ptx] Re: Default Settings
michae...@mac.com schrieb am Donnerstag, 28. April 2022 um 12:23:49 UTC+2: > pto_var: can anyone tell me whether there is a way to specify, for > example, optimising yaw of all images including the anchor without having > to specify each image? > > Thus, some sort of: > --opt=yALL > rather than > --opt=y0,y1,y2,y3,y4… > Assuming anchor is first image (image index 0): pto_var --opt=y,y0 -- A list of frequently asked questions is available at: http://wiki.panotools.org/Hugin_FAQ --- You received this message because you are subscribed to the Google Groups "hugin and other free panoramic software" group. To unsubscribe from this group and stop receiving emails from it, send an email to hugin-ptx+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/hugin-ptx/0af99cfd-0c30-4a92-a81b-f11dd262c718n%40googlegroups.com.
Re: [hugin-ptx] Re: Default Settings
pto_var: can anyone tell me whether there is a way to specify, for example, optimising yaw of all images including the anchor without having to specify each image? Thus, some sort of: --opt=yALL rather than --opt=y0,y1,y2,y3,y4… On Thursday, 28 April 2022 at 10:39:12 UTC+1 Michael Perry wrote: > Bruno, thank you for replying and so quickly. > > cpclean - I shall move this, optimise and re-optimise as you suggest. > > vignetting - I believe I do not need to optimise exposure as I am shooting > in controlled lighting (it does not change). In practice I use a raking > light; so I don't want anything to happen to exposure until I get to > Photoshop where I can apply a neutral gradient to correct it. > > mosaic drag - yes, it resets on opening Hugin, it's not stored in the .pto > nor, sadly, in the plist. I suppose it is hard-wired in the programme > somehow. > > I wonder if future incarnations of Hugin could include preferences for the > Optimiser (orientation parameters) and Fast Panorama Preview (mosaic drag > and projections) > > On Wednesday, 27 April 2022 at 23:12:41 UTC+1 bruno...@gmail.com wrote: > >> Hi Michael, it has been quite a while since I have done anything this >> complex in pto_var ot pano_modify, so I hope somebody else can answer >> your detailed questions. >> >> A couple of things I noticed: >> >> You are running cpclean immediately after running cpfind, but cpclean >> filters control points based on how well they optimise, so you should >> run it after optimisation, or at least after you have set all your >> optimisation parameters. Then usually you would run optimisation again >> after running cpclean. >> >> Although fixing barrel distortion in an external tool should be fine, >> you might want to let Hugin optimise vignetting if you are also >> optimising exposure, Hugin uses the exposure distribution caused by >> the vignetting to calculate the camera response curve. >> >> I don't think Hugin settings like mosaic drag mode are stored in the >> PTO file, in which case it wouldn't be possible to set this on the >> command-line. >> >> -- >> Bruno >> >> On Wed, 27 Apr 2022 at 19:30, 'Michael Perry' wrote: >> >> > I am converting my workflow to the command line. I have a problem with >> pto_var and a question about pano_modify, I wonder if you can advise me. >> > >> > BACKGROUND >> > >> > I am stitching a mosaic of images of a painting. The photographs have >> been shot with a camera mounted on a gimbal that is itself suspended on an >> X-Y frame. The biggest difference between one image and the next is its X-Y >> position. In theory they should all have the same pitch and yaw as the >> camera moves little on its gimbal. There is some slight Z to account for as >> the frame is not perfectly parallel to the painting. The images have to be >> rotated some 90 degrees. >> > >> > The images have been pre-processed for lens distortion and vignetting >> with Capture One, so I am ignoring lens parameters. >> > >> > COMMAND LINE >> > >> > I have been using the following commands to build the .pto file. I have >> annotated them in case it is useful for other people >> > >> > pto_gen -p 0 -f 40.7 -o project.pto *.tif >> > >> > (create the project with all files in folder, rectilinear projection >> and a 50mm lens (FOV = 40.7) >> > >> > cpfind --multirow --fullscale -o project_cp.pto project.pto >> > >> > (find control points in a mosaic, full-scale probably not necessary for >> me) >> > >> > cpclean -o project_clean.pto project_cp.pto >> > >> > (clean control points) >> > >> > pto_var --set=r=90 --opt=TrX,TrY -o project_XY.pto project_clean.pto >> > >> > (set X-Y variables of all images EXCEPT anchor, for optimisation) >> > >> > autooptimiser -n -o project_XY.pto project_XY.pto >> > >> > (optimise images for X and Y) >> > >> > pto_var --opt=y,p,TrZ -o project_ypZ.pto project_XY.pto >> > >> > (set pitch, yaw and Z of all images EXCEPT anchor) >> > >> > This is where I have the problem, I need to select the yaw and pitch of >> the anchor image for optimisation with all the rest. I can not see how to >> do that easily. >> > >> > POSSIBLE SOLUTION >> > >> > pto_var --opt=y0,p0,y1,p1,TrZ -o project_ypXYZ.pto project_ypZ.pto >> > >> > (set pitch, yaw and Z of all images INCLUDING anchor) >> > >> > It is possible to select the anchor if each image is individually >> selected. HOWEVER when large mosaics are stitched it makes for clumsy code. >> > >> > EXTRA QUESTION >> > >> > pano_modify --projection=0 --fov=AUTO -o finished.pto project_ypXYZ.pto >> > >> > (Set projection to Rectilinear, fit image to screen) >> > >> > I finalise the image in Fast Panorama preview having set Projection to >> Rectilinear and fitted the image to the screen. It would be helpful if I >> could also set the Drag Mode to Mosaic in the Move/Drag tab and the >> Overview Mode to Mosaic Plane. Is there some code that might effect this?
Re: [hugin-ptx] Re: Default Settings
Bruno, thank you for replying and so quickly. cpclean - I shall move this, optimise and re-optimise as you suggest. vignetting - I believe I do not need to optimise exposure as I am shooting in controlled lighting (it does not change). In practice I use a raking light; so I don't want anything to happen to exposure until I get to Photoshop where I can apply a neutral gradient to correct it. mosaic drag - yes, it resets on opening Hugin, it's not stored in the .pto nor, sadly, in the plist. I suppose it is hard-wired in the programme somehow. I wonder if future incarnations of Hugin could include preferences for the Optimiser (orientation parameters) and Fast Panorama Preview (mosaic drag and projections) On Wednesday, 27 April 2022 at 23:12:41 UTC+1 bruno...@gmail.com wrote: > Hi Michael, it has been quite a while since I have done anything this > complex in pto_var ot pano_modify, so I hope somebody else can answer > your detailed questions. > > A couple of things I noticed: > > You are running cpclean immediately after running cpfind, but cpclean > filters control points based on how well they optimise, so you should > run it after optimisation, or at least after you have set all your > optimisation parameters. Then usually you would run optimisation again > after running cpclean. > > Although fixing barrel distortion in an external tool should be fine, > you might want to let Hugin optimise vignetting if you are also > optimising exposure, Hugin uses the exposure distribution caused by > the vignetting to calculate the camera response curve. > > I don't think Hugin settings like mosaic drag mode are stored in the > PTO file, in which case it wouldn't be possible to set this on the > command-line. > > -- > Bruno > > On Wed, 27 Apr 2022 at 19:30, 'Michael Perry' wrote: > > > I am converting my workflow to the command line. I have a problem with > pto_var and a question about pano_modify, I wonder if you can advise me. > > > > BACKGROUND > > > > I am stitching a mosaic of images of a painting. The photographs have > been shot with a camera mounted on a gimbal that is itself suspended on an > X-Y frame. The biggest difference between one image and the next is its X-Y > position. In theory they should all have the same pitch and yaw as the > camera moves little on its gimbal. There is some slight Z to account for as > the frame is not perfectly parallel to the painting. The images have to be > rotated some 90 degrees. > > > > The images have been pre-processed for lens distortion and vignetting > with Capture One, so I am ignoring lens parameters. > > > > COMMAND LINE > > > > I have been using the following commands to build the .pto file. I have > annotated them in case it is useful for other people > > > > pto_gen -p 0 -f 40.7 -o project.pto *.tif > > > > (create the project with all files in folder, rectilinear projection and > a 50mm lens (FOV = 40.7) > > > > cpfind --multirow --fullscale -o project_cp.pto project.pto > > > > (find control points in a mosaic, full-scale probably not necessary for > me) > > > > cpclean -o project_clean.pto project_cp.pto > > > > (clean control points) > > > > pto_var --set=r=90 --opt=TrX,TrY -o project_XY.pto project_clean.pto > > > > (set X-Y variables of all images EXCEPT anchor, for optimisation) > > > > autooptimiser -n -o project_XY.pto project_XY.pto > > > > (optimise images for X and Y) > > > > pto_var --opt=y,p,TrZ -o project_ypZ.pto project_XY.pto > > > > (set pitch, yaw and Z of all images EXCEPT anchor) > > > > This is where I have the problem, I need to select the yaw and pitch of > the anchor image for optimisation with all the rest. I can not see how to > do that easily. > > > > POSSIBLE SOLUTION > > > > pto_var --opt=y0,p0,y1,p1,TrZ -o project_ypXYZ.pto project_ypZ.pto > > > > (set pitch, yaw and Z of all images INCLUDING anchor) > > > > It is possible to select the anchor if each image is individually > selected. HOWEVER when large mosaics are stitched it makes for clumsy code. > > > > EXTRA QUESTION > > > > pano_modify --projection=0 --fov=AUTO -o finished.pto project_ypXYZ.pto > > > > (Set projection to Rectilinear, fit image to screen) > > > > I finalise the image in Fast Panorama preview having set Projection to > Rectilinear and fitted the image to the screen. It would be helpful if I > could also set the Drag Mode to Mosaic in the Move/Drag tab and the > Overview Mode to Mosaic Plane. Is there some code that might effect this? > > > > Hoping you will find these interesting problems. > > -- > Bruno > -- A list of frequently asked questions is available at: http://wiki.panotools.org/Hugin_FAQ --- You received this message because you are subscribed to the Google Groups "hugin and other free panoramic software" group. To unsubscribe from this group and stop receiving emails from it, send an email to hugin-ptx+unsubscr...@googlegroups.com. To view this discussion on the web visit
Re: [hugin-ptx] Re: Default Settings
Hi Michael, it has been quite a while since I have done anything this complex in pto_var ot pano_modify, so I hope somebody else can answer your detailed questions. A couple of things I noticed: You are running cpclean immediately after running cpfind, but cpclean filters control points based on how well they optimise, so you should run it after optimisation, or at least after you have set all your optimisation parameters. Then usually you would run optimisation again after running cpclean. Although fixing barrel distortion in an external tool should be fine, you might want to let Hugin optimise vignetting if you are also optimising exposure, Hugin uses the exposure distribution caused by the vignetting to calculate the camera response curve. I don't think Hugin settings like mosaic drag mode are stored in the PTO file, in which case it wouldn't be possible to set this on the command-line. -- Bruno On Wed, 27 Apr 2022 at 19:30, 'Michael Perry' wrote: > I am converting my workflow to the command line. I have a problem with > pto_var and a question about pano_modify, I wonder if you can advise me. > > BACKGROUND > > I am stitching a mosaic of images of a painting. The photographs have been > shot with a camera mounted on a gimbal that is itself suspended on an X-Y > frame. The biggest difference between one image and the next is its X-Y > position. In theory they should all have the same pitch and yaw as the camera > moves little on its gimbal. There is some slight Z to account for as the > frame is not perfectly parallel to the painting. The images have to be > rotated some 90 degrees. > > The images have been pre-processed for lens distortion and vignetting with > Capture One, so I am ignoring lens parameters. > > COMMAND LINE > > I have been using the following commands to build the .pto file. I have > annotated them in case it is useful for other people > > pto_gen -p 0 -f 40.7 -o project.pto *.tif > > (create the project with all files in folder, rectilinear projection and a > 50mm lens (FOV = 40.7) > > cpfind --multirow --fullscale -o project_cp.pto project.pto > > (find control points in a mosaic, full-scale probably not necessary for me) > > cpclean -o project_clean.pto project_cp.pto > > (clean control points) > > pto_var --set=r=90 --opt=TrX,TrY -o project_XY.pto project_clean.pto > > (set X-Y variables of all images EXCEPT anchor, for optimisation) > > autooptimiser -n -o project_XY.pto project_XY.pto > > (optimise images for X and Y) > > pto_var --opt=y,p,TrZ -o project_ypZ.pto project_XY.pto > > (set pitch, yaw and Z of all images EXCEPT anchor) > > This is where I have the problem, I need to select the yaw and pitch of the > anchor image for optimisation with all the rest. I can not see how to do that > easily. > > POSSIBLE SOLUTION > > pto_var --opt=y0,p0,y1,p1,TrZ -o project_ypXYZ.pto project_ypZ.pto > > (set pitch, yaw and Z of all images INCLUDING anchor) > > It is possible to select the anchor if each image is individually selected. > HOWEVER when large mosaics are stitched it makes for clumsy code. > > EXTRA QUESTION > > pano_modify --projection=0 --fov=AUTO -o finished.pto project_ypXYZ.pto > > (Set projection to Rectilinear, fit image to screen) > > I finalise the image in Fast Panorama preview having set Projection to > Rectilinear and fitted the image to the screen. It would be helpful if I > could also set the Drag Mode to Mosaic in the Move/Drag tab and the Overview > Mode to Mosaic Plane. Is there some code that might effect this? > > Hoping you will find these interesting problems. -- Bruno -- A list of frequently asked questions is available at: http://wiki.panotools.org/Hugin_FAQ --- You received this message because you are subscribed to the Google Groups "hugin and other free panoramic software" group. To unsubscribe from this group and stop receiving emails from it, send an email to hugin-ptx+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/hugin-ptx/CAJV99Zj%2BCP-%2BGa7yTxFwk_eCMGZZ34CsDOH7Uf9PHgfmf5FzrA%40mail.gmail.com.
Re: [hugin-ptx] Re: Default Settings
Dear Bruno I am converting my workflow to the command line. I have a problem with pto_var and a question about pano_modify, I wonder if you can advise me. BACKGROUND I am stitching a mosaic of images of a painting. The photographs have been shot with a camera mounted on a gimbal that is itself suspended on an X-Y frame. The biggest difference between one image and the next is its X-Y position. In theory they should all have the same pitch and yaw as the camera moves little on its gimbal. There is some slight Z to account for as the frame is not perfectly parallel to the painting. The images have to be rotated some 90 degrees. The images have been pre-processed for lens distortion and vignetting with Capture One, so I am ignoring lens parameters. COMMAND LINE I have been using the following commands to build the .pto file. I have annotated them in case it is useful for other people pto_gen -p 0 -f 40.7 -o project.pto *.tif (create the project with all files in folder, rectilinear projection and a 50mm lens (FOV = 40.7) cpfind --multirow --fullscale -o project_cp.pto project.pto (find control points in a mosaic, full-scale probably not necessary for me) cpclean -o project_clean.pto project_cp.pto (clean control points) pto_var --set=r=90 --opt=TrX,TrY -o project_XY.pto project_clean.pto (set X-Y variables of all images EXCEPT anchor, for optimisation) autooptimiser -n -o project_XY.pto project_XY.pto (optimise images for X and Y) pto_var --opt=y,p,TrZ -o project_ypZ.pto project_XY.pto (set pitch, yaw and Z of all images EXCEPT anchor) This is where I have the problem, I need to select the yaw and pitch of the anchor image for optimisation with all the rest. I can not see how to do that easily. POSSIBLE SOLUTION pto_var --opt=y0,p0,y1,p1,TrZ -o project_ypXYZ.pto project_ypZ.pto (set pitch, yaw and Z of all images INCLUDING anchor) It is possible to select the anchor if each image is individually selected. HOWEVER when large mosaics are stitched it makes for clumsy code. EXTRA QUESTION pano_modify --projection=0 --fov=AUTO -o finished.pto project_ypXYZ.pto (Set projection to Rectilinear, fit image to screen) I finalise the image in Fast Panorama preview having set Projection to Rectilinear and fitted the image to the screen. It would be helpful if I could also set the Drag Mode to Mosaic in the Move/Drag tab and the Overview Mode to Mosaic Plane. Is there some code that might effect this? Hoping you will find these interesting problems. Michael On Tuesday, 26 April 2022 at 15:34:22 UTC+1 Michael Perry wrote: > Oh! How exciting. I had not come across this Executor system - I will > search for it. Thank you > > > On Friday, 15 April 2022 at 18:05:13 UTC+1 bruno...@gmail.com wrote: > >> Generating templates like this is a good approach, and it works well in >> the GUI and on the command-line. >> >> Though I wasn't referring to the python API, the 'Executor' system is >> used by Hugin when aligning and stitching using the Assistant. It is >> configurable by editing these INI files. >> >> -- >> Bruno >> >> On Fri, 15 Apr 2022, 13:54 'Michael Perry' via hugin and other free >> panoramic software, wrote: >> >>> Bruno, thank you - However, I suspect that the Python Plugin Interface >>> (which I believe is what I would need to do that) does not work with the >>> OSX version of Hugin. I can not find it in my Preferences menus nor an >>> angle of view threshold. I think instead that I will create a library of >>> .pto files (1 x 2 frames , 2 x 2 frames, 2 x 3 frames, 3 x 3 frames and so >>> on) where I would just need to substitute the filenames of my >>> images, preset an XY optimisation, and then find control points, and then >>> optimise pitch, yaw and Z. >>> >>> >>> On Thursday, 14 April 2022 at 14:39:21 UTC+1 bruno...@gmail.com wrote: >>> >> I'm not at a computer, so I can't point directly to functionality, but I seem to remember that the default Hugin Assistant has an angle of view threshold, below which it chooses rectilinear, and above which it chooses equirectangular. Regarding custom workflows that don't use these default Assistant settings (again, I can't point to this off the top of my head), there are a series of Hugin 'executor' configurations that you can use instead. These are in an easy-to-edit INI format, so you are encouraged to modify, create and share. I haven't played with them since they were first introduced, it would be really useful if you could try this method and describe your success or failure here, as they are an underused resource that more people would use if they were aware. On Thu, 14 Apr 2022, 11:58 'Michael Perry' via hugin and other free panoramic software, wrote: > Is there a way to get the Hugin 2019.2.0 to use Rectilinear Projection > as its default projection rather than Equirectangular?
Re: [hugin-ptx] Re: Default Settings
Oh! How exciting. I had not come across this Executor system - I will search for it. Thank you On Friday, 15 April 2022 at 18:05:13 UTC+1 bruno...@gmail.com wrote: > Generating templates like this is a good approach, and it works well in > the GUI and on the command-line. > > Though I wasn't referring to the python API, the 'Executor' system is used > by Hugin when aligning and stitching using the Assistant. It is > configurable by editing these INI files. > > -- > Bruno > > On Fri, 15 Apr 2022, 13:54 'Michael Perry' via hugin and other free > panoramic software, wrote: > >> Bruno, thank you - However, I suspect that the Python Plugin Interface >> (which I believe is what I would need to do that) does not work with the >> OSX version of Hugin. I can not find it in my Preferences menus nor an >> angle of view threshold. I think instead that I will create a library of >> .pto files (1 x 2 frames , 2 x 2 frames, 2 x 3 frames, 3 x 3 frames and so >> on) where I would just need to substitute the filenames of my >> images, preset an XY optimisation, and then find control points, and then >> optimise pitch, yaw and Z. >> >> >> On Thursday, 14 April 2022 at 14:39:21 UTC+1 bruno...@gmail.com wrote: >> > I'm not at a computer, so I can't point directly to functionality, but I >>> seem to remember that the default Hugin Assistant has an angle of view >>> threshold, below which it chooses rectilinear, and above which it chooses >>> equirectangular. >>> >>> Regarding custom workflows that don't use these default Assistant >>> settings (again, I can't point to this off the top of my head), there are a >>> series of Hugin 'executor' configurations that you can use instead. These >>> are in an easy-to-edit INI format, so you are encouraged to modify, create >>> and share. I haven't played with them since they were first introduced, it >>> would be really useful if you could try this method and describe your >>> success or failure here, as they are an underused resource that more people >>> would use if they were aware. >>> >>> On Thu, 14 Apr 2022, 11:58 'Michael Perry' via hugin and other free >>> panoramic software, wrote: >>> Is there a way to get the Hugin 2019.2.0 to use Rectilinear Projection as its default projection rather than Equirectangular? On Thursday, 25 February 2021 at 13:00:58 UTC Michael Perry wrote: > I wonder if there is anyone in the forum who has a view about this? > > On Saturday, 22 August 2020 at 15:31:54 UTC+1 Michael Perry wrote: > >> Can anyone advise me how to change the default settings for y, p, r, >> X, Y, projection (to and move/drag (to mosaic) >> Also, is there some way that I can restrict the clustering of control >> points - reducing the number of points created in similar locations - >> I'd >> rather have 5 well-spaced control points per overlap than 25 control >> points >> >> thank you >> >> On Sunday, 18 November 2018 at 09:46:51 UTC Michael Perry wrote: >> >>> I use Hugin to stitch mosaics. I find the best procedure is to >>> optimise for X and Y before y, p and r. I have to select Custom >>> parameters >>> to be able to do this, then after de-selecting yaw, pitch and roll in >>> the >>> Optimiser tab, I select the X and Y variables columns in their place. >>> >>> Is there a way to change the default settings for Hugin so that, on >>> opening the application: >>> a) Custom parameters is always selected in Photos tab and X and Y >>> columns are selected in the Custom tab? >>> b) Similarly, is there a way to change the default projection from >>> Equirectangular to Rectilinear? >>> >>> Thank you for your thoughts >>> >> -- A list of frequently asked questions is available at: http://wiki.panotools.org/Hugin_FAQ --- You received this message because you are subscribed to the Google Groups "hugin and other free panoramic software" group. To unsubscribe from this group and stop receiving emails from it, send an email to hugin-ptx+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/hugin-ptx/daa30aa3-9cd5-4d99-be19-7ddeab079560n%40googlegroups.com.
Re: [hugin-ptx] Re: Default Settings
Generating templates like this is a good approach, and it works well in the GUI and on the command-line. Though I wasn't referring to the python API, the 'Executor' system is used by Hugin when aligning and stitching using the Assistant. It is configurable by editing these INI files. -- Bruno On Fri, 15 Apr 2022, 13:54 'Michael Perry' via hugin and other free panoramic software, wrote: > Bruno, thank you - However, I suspect that the Python Plugin Interface > (which I believe is what I would need to do that) does not work with the > OSX version of Hugin. I can not find it in my Preferences menus nor an > angle of view threshold. I think instead that I will create a library of > .pto files (1 x 2 frames , 2 x 2 frames, 2 x 3 frames, 3 x 3 frames and so > on) where I would just need to substitute the filenames of my > images, preset an XY optimisation, and then find control points, and then > optimise pitch, yaw and Z. > > > On Thursday, 14 April 2022 at 14:39:21 UTC+1 bruno...@gmail.com wrote: > >> I'm not at a computer, so I can't point directly to functionality, but I >> seem to remember that the default Hugin Assistant has an angle of view >> threshold, below which it chooses rectilinear, and above which it chooses >> equirectangular. >> >> Regarding custom workflows that don't use these default Assistant >> settings (again, I can't point to this off the top of my head), there are a >> series of Hugin 'executor' configurations that you can use instead. These >> are in an easy-to-edit INI format, so you are encouraged to modify, create >> and share. I haven't played with them since they were first introduced, it >> would be really useful if you could try this method and describe your >> success or failure here, as they are an underused resource that more people >> would use if they were aware. >> >> On Thu, 14 Apr 2022, 11:58 'Michael Perry' via hugin and other free >> panoramic software, wrote: >> >>> Is there a way to get the Hugin 2019.2.0 to use Rectilinear Projection >>> as its default projection rather than Equirectangular? >>> >>> On Thursday, 25 February 2021 at 13:00:58 UTC Michael Perry wrote: >>> I wonder if there is anyone in the forum who has a view about this? On Saturday, 22 August 2020 at 15:31:54 UTC+1 Michael Perry wrote: > Can anyone advise me how to change the default settings for y, p, r, > X, Y, projection (to and move/drag (to mosaic) > Also, is there some way that I can restrict the clustering of control > points - reducing the number of points created in similar locations - I'd > rather have 5 well-spaced control points per overlap than 25 control > points > > thank you > > On Sunday, 18 November 2018 at 09:46:51 UTC Michael Perry wrote: > >> I use Hugin to stitch mosaics. I find the best procedure is to >> optimise for X and Y before y, p and r. I have to select Custom >> parameters >> to be able to do this, then after de-selecting yaw, pitch and roll in the >> Optimiser tab, I select the X and Y variables columns in their place. >> >> Is there a way to change the default settings for Hugin so that, on >> opening the application: >> a) Custom parameters is always selected in Photos tab and X and Y >> columns are selected in the Custom tab? >> b) Similarly, is there a way to change the default projection from >> Equirectangular to Rectilinear? >> >> Thank you for your thoughts >> > -- A list of frequently asked questions is available at: http://wiki.panotools.org/Hugin_FAQ --- You received this message because you are subscribed to the Google Groups "hugin and other free panoramic software" group. To unsubscribe from this group and stop receiving emails from it, send an email to hugin-ptx+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/hugin-ptx/CAJV99ZgLyarHaNkWwhyA_%2BDMf1K4hv7hb9Q5iFn1UQ0fV7J4ew%40mail.gmail.com.
Re: [hugin-ptx] Re: Default Settings
Bruno, thank you - However, I suspect that the Python Plugin Interface (which I believe is what I would need to do that) does not work with the OSX version of Hugin. I can not find it in my Preferences menus nor an angle of view threshold. I think instead that I will create a library of .pto files (1 x 2 frames , 2 x 2 frames, 2 x 3 frames, 3 x 3 frames and so on) where I would just need to substitute the filenames of my images, preset an XY optimisation, and then find control points, and then optimise pitch, yaw and Z. -- Michael On Thursday, 14 April 2022 at 14:39:21 UTC+1 bruno...@gmail.com wrote: > I'm not at a computer, so I can't point directly to functionality, but I > seem to remember that the default Hugin Assistant has an angle of view > threshold, below which it chooses rectilinear, and above which it chooses > equirectangular. > > Regarding custom workflows that don't use these default Assistant settings > (again, I can't point to this off the top of my head), there are a series > of Hugin 'executor' configurations that you can use instead. These are in > an easy-to-edit INI format, so you are encouraged to modify, create and > share. I haven't played with them since they were first introduced, it > would be really useful if you could try this method and describe your > success or failure here, as they are an underused resource that more people > would use if they were aware. > > -- > Bruno > > > On Thu, 14 Apr 2022, 11:58 'Michael Perry' via hugin and other free > panoramic software, wrote: > >> Is there a way to get the Hugin 2019.2.0 to use Rectilinear Projection as >> its default projection rather than Equirectangular? >> >> On Thursday, 25 February 2021 at 13:00:58 UTC Michael Perry wrote: >> >>> I wonder if there is anyone in the forum who has a view about this? >>> >>> On Saturday, 22 August 2020 at 15:31:54 UTC+1 Michael Perry wrote: >>> Can anyone advise me how to change the default settings for y, p, r, X, Y, projection (to and move/drag (to mosaic) Also, is there some way that I can restrict the clustering of control points - reducing the number of points created in similar locations - I'd rather have 5 well-spaced control points per overlap than 25 control points thank you On Sunday, 18 November 2018 at 09:46:51 UTC Michael Perry wrote: > I use Hugin to stitch mosaics. I find the best procedure is to > optimise for X and Y before y, p and r. I have to select Custom > parameters > to be able to do this, then after de-selecting yaw, pitch and roll in the > Optimiser tab, I select the X and Y variables columns in their place. > > Is there a way to change the default settings for Hugin so that, on > opening the application: > a) Custom parameters is always selected in Photos tab and X and Y > columns are selected in the Custom tab? > b) Similarly, is there a way to change the default projection from > Equirectangular to Rectilinear? > > Thank you for your thoughts > -- A list of frequently asked questions is available at: http://wiki.panotools.org/Hugin_FAQ --- You received this message because you are subscribed to the Google Groups "hugin and other free panoramic software" group. To unsubscribe from this group and stop receiving emails from it, send an email to hugin-ptx+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/hugin-ptx/f2cbe1b1-0405-466d-88e0-2cbd2bab38c5n%40googlegroups.com.
Re: [hugin-ptx] Re: Default Settings
I'm not at a computer, so I can't point directly to functionality, but I seem to remember that the default Hugin Assistant has an angle of view threshold, below which it chooses rectilinear, and above which it chooses equirectangular. Regarding custom workflows that don't use these default Assistant settings (again, I can't point to this off the top of my head), there are a series of Hugin 'executor' configurations that you can use instead. These are in an easy-to-edit INI format, so you are encouraged to modify, create and share. I haven't played with them since they were first introduced, it would be really useful if you could try this method and describe your success or failure here, as they are an underused resource that more people would use if they were aware. -- Bruno On Thu, 14 Apr 2022, 11:58 'Michael Perry' via hugin and other free panoramic software, wrote: > Is there a way to get the Hugin 2019.2.0 to use Rectilinear Projection as > its default projection rather than Equirectangular? > > On Thursday, 25 February 2021 at 13:00:58 UTC Michael Perry wrote: > >> I wonder if there is anyone in the forum who has a view about this? >> >> On Saturday, 22 August 2020 at 15:31:54 UTC+1 Michael Perry wrote: >> >>> Can anyone advise me how to change the default settings for y, p, r, X, >>> Y, projection (to and move/drag (to mosaic) >>> Also, is there some way that I can restrict the clustering of control >>> points - reducing the number of points created in similar locations - I'd >>> rather have 5 well-spaced control points per overlap than 25 control points >>> >>> thank you >>> >>> On Sunday, 18 November 2018 at 09:46:51 UTC Michael Perry wrote: >>> I use Hugin to stitch mosaics. I find the best procedure is to optimise for X and Y before y, p and r. I have to select Custom parameters to be able to do this, then after de-selecting yaw, pitch and roll in the Optimiser tab, I select the X and Y variables columns in their place. Is there a way to change the default settings for Hugin so that, on opening the application: a) Custom parameters is always selected in Photos tab and X and Y columns are selected in the Custom tab? b) Similarly, is there a way to change the default projection from Equirectangular to Rectilinear? Thank you for your thoughts >>> -- A list of frequently asked questions is available at: http://wiki.panotools.org/Hugin_FAQ --- You received this message because you are subscribed to the Google Groups "hugin and other free panoramic software" group. To unsubscribe from this group and stop receiving emails from it, send an email to hugin-ptx+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/hugin-ptx/CAJV99Zhx8gJSBgOjs%3DS5f87v%3Diwo%2BTUsRf%3DbfKVWy_jPoJdX_Q%40mail.gmail.com.
[hugin-ptx] Re: Default Settings
Is there a way to get the Hugin 2019.2.0 to use Rectilinear Projection as its default projection rather than Equirectangular? On Thursday, 25 February 2021 at 13:00:58 UTC Michael Perry wrote: > I wonder if there is anyone in the forum who has a view about this? > > > On Saturday, 22 August 2020 at 15:31:54 UTC+1 Michael Perry wrote: > >> Can anyone advise me how to change the default settings for y, p, r, X, >> Y, projection (to and move/drag (to mosaic) >> Also, is there some way that I can restrict the clustering of control >> points - reducing the number of points created in similar locations - I'd >> rather have 5 well-spaced control points per overlap than 25 control points >> >> thank you >> >> On Sunday, 18 November 2018 at 09:46:51 UTC Michael Perry wrote: >> >>> I use Hugin to stitch mosaics. I find the best procedure is to optimise >>> for X and Y before y, p and r. I have to select Custom parameters to be >>> able to do this, then after de-selecting yaw, pitch and roll in the >>> Optimiser tab, I select the X and Y variables columns in their place. >>> >>> Is there a way to change the default settings for Hugin so that, on >>> opening the application: >>> a) Custom parameters is always selected in Photos tab and X and Y >>> columns are selected in the Custom tab? >>> b) Similarly, is there a way to change the default projection from >>> Equirectangular to Rectilinear? >>> >>> Thank you for your thoughts >>> >>> -- A list of frequently asked questions is available at: http://wiki.panotools.org/Hugin_FAQ --- You received this message because you are subscribed to the Google Groups "hugin and other free panoramic software" group. To unsubscribe from this group and stop receiving emails from it, send an email to hugin-ptx+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/hugin-ptx/eea4b896-c667-4418-a6c6-2410a47959c4n%40googlegroups.com.
[hugin-ptx] Re: Default Settings
I wonder if there is anyone in the forum who has a view about this? On Saturday, 22 August 2020 at 15:31:54 UTC+1 Michael Perry wrote: > Can anyone advise me how to change the default settings for y, p, r, X, Y, > projection (to and move/drag (to mosaic) > Also, is there some way that I can restrict the clustering of control > points - reducing the number of points created in similar locations - I'd > rather have 5 well-spaced control points per overlap than 25 control points > > thank you > > On Sunday, 18 November 2018 at 09:46:51 UTC Michael Perry wrote: > >> I use Hugin to stitch mosaics. I find the best procedure is to optimise >> for X and Y before y, p and r. I have to select Custom parameters to be >> able to do this, then after de-selecting yaw, pitch and roll in the >> Optimiser tab, I select the X and Y variables columns in their place. >> >> Is there a way to change the default settings for Hugin so that, on >> opening the application: >> a) Custom parameters is always selected in Photos tab and X and Y columns >> are selected in the Custom tab? >> b) Similarly, is there a way to change the default projection from >> Equirectangular to Rectilinear? >> >> Thank you for your thoughts >> >> -- A list of frequently asked questions is available at: http://wiki.panotools.org/Hugin_FAQ --- You received this message because you are subscribed to the Google Groups "hugin and other free panoramic software" group. To unsubscribe from this group and stop receiving emails from it, send an email to hugin-ptx+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/hugin-ptx/e3c72a67-54b7-492d-be53-ecfc1c4ec62en%40googlegroups.com.
[hugin-ptx] Re: Default Settings
Can anyone advise me how to change the default settings for y, p, r, X, Y, projection (to and move/drag (to mosaic) Also, is there some way that I can restrict the clustering of control points - reducing the number of points created in similar locations - I'd rather have 5 well-spaced control points per overlap than 25 control points thank you On Sunday, 18 November 2018 at 09:46:51 UTC Michael Perry wrote: > I use Hugin to stitch mosaics. I find the best procedure is to optimise > for X and Y before y, p and r. I have to select Custom parameters to be > able to do this, then after de-selecting yaw, pitch and roll in the > Optimiser tab, I select the X and Y variables columns in their place. > > Is there a way to change the default settings for Hugin so that, on > opening the application: > a) Custom parameters is always selected in Photos tab and X and Y columns > are selected in the Custom tab? > b) Similarly, is there a way to change the default projection from > Equirectangular to Rectilinear? > > Thank you for your thoughts > > -- A list of frequently asked questions is available at: http://wiki.panotools.org/Hugin_FAQ --- You received this message because you are subscribed to the Google Groups "hugin and other free panoramic software" group. To unsubscribe from this group and stop receiving emails from it, send an email to hugin-ptx+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/hugin-ptx/49c75b3f-01e3-476a-836d-eb785bc3c761n%40googlegroups.com.
