Re: Moving from XCF-local to single-system sysplex environment
Sysplex -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] On Behalf Of Rabbe, Luke Sent: Friday, February 25, 2011 1:32 PM To: IBM-MAIN@bama.ua.edu Subject: Re: Moving from XCF-local to single-system sysplex environment I know these CDS types: ARM BPXMCDS CFRM LOGR SFM WLM What's the 7th type? Luke -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] On Behalf Of R.S. Sent: Friday, February 25, 2011 12:03 PM To: IBM-MAIN@bama.ua.edu Subject: Re: Moving from XCF-local to single-system sysplex environment Daniel Allen pisze: We have a XCF-local system with no access to a coupling facility. However, we would like to run CICS/TS 4.1 with DASD-only logging. Can we create a COUPLExx parmlib member with LOGR only ? Or do we need all five COUPLE facilities ? No, and no. You have to create two CDS types: sysplex (aka XCF) and LOGR. Oh, BTW, there are 7 CDS types. -- Radoslaw Skorupka Lodz, Poland -- BRE Bank SA ul. Senatorska 18 00-950 Warszawa www.brebank.pl Sd Rejonowy dla m. st. Warszawy XII Wydzia Gospodarczy Krajowego Rejestru Sdowego, nr rejestru przedsibiorców KRS 025237 NIP: 526-021-50-88 Wedug stanu na dzie 16.07.2010 r. kapita zakadowy BRE Banku SA (w caoci wpacony) wynosi 168.248.328 zotych. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html NOTE: This electronic message and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you have received this message in error, any unauthorized review, use, disclosure, distribution or copying of this message is prohibited. If you are not the intended recipient, please contact the sender by reply e-mail and destroy all copies of the original message. Unless expressly stated in this e-mail, nothing in this message should be construed as a digital or electronic signature or writing. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: Potential z/OS MPF behavior change -- comments please
I would like to see you change MPFLST, so if you suppress messages (i.e. IEC*) that highlighted IEC messages would still display on the console. -Original Message- From: IBM Mainframe Discussion List [mailto:ibm-m...@bama.ua.edu] On Behalf Of W. Kevin Kelley Sent: Tuesday, October 19, 2010 9:11 PM To: IBM-MAIN@bama.ua.edu Subject: Re: Potential z/OS MPF behavior change -- comments please Good comments from you all. Thanks! The specific problem we are attempting to solve is interactions between MONITOR message generation and MPF. With the changes we made during the Console Restructure, MONITOR messages can be produced without a console requesting them. You can request that the messages not be queued to a console for display purposes (but will be queued to EMCS consoles for automation purposes) and you can request that the messages not be logged. All of this was done to allow customers whose automation require the messages to receive the messages but not have the messages -- optionally -- go anywhere else. The problem is that if a customer requests that the messages not be logged but puts an entry for the message in MPF, MPF undoes the no logging. The simple solution is to remove the message entry from MPF, but perhaps the customer wanted to drive an MPF exit, and then would be unable to do so. There is a more general question and that is how should we be handling messages that are being generated solely for automation and being solely consumed by automation? The MONITOR messages are but the tip of the iceberg in this regard. We have had requests for ways of specifying on commands that the command response message is to be returned to the console (typically an EMCS automation console) but is not to be logged. From the comments I've seen so far, whatever we do must be optional. W. Kevin Kelley -- IBM POK Lab -- z/OS Core Technical Development -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html NOTE: This electronic message and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you have received this message in error, any unauthorized review, use, disclosure, distribution or copying of this message is prohibited. If you are not the intended recipient, please contact the sender by reply e-mail and destroy all copies of the original message. Unless expressly stated in this e-mail, nothing in this message should be construed as a digital or electronic signature or writing. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: Merging Catalogs
I used the DFSMS Managing Catalogs manual and had no problems merging 2 catalogs into an existing catalog. -Original Message- From: IBM Mainframe Discussion List [mailto:ibm-m...@bama.ua.edu] On Behalf Of Arturo Sent: Friday, June 12, 2009 2:55 PM To: IBM-MAIN@bama.ua.edu Subject: Merging Catalogs We are considering merging our 4 Master 35 User Catalogs into a manageable number and would like to ask the Group what preparatory work; documentation/manuals they found that were helpful. What advise would you give that you didn't get and wish someone would have mentioned? We all know how it goes we go in with our solid plan of attack and then from no where something gets you in the foot. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: TCBD call error.
Check your LOADxx member and see if you have the wrong VOLCAT high level qualifier in the SYSCAT parm: SYSCAT ICFD00113CICF.DEVLPLEX.MASTER.CATALOG ICF Columns 64-71 contain the high level qualifier for your VOLCAT.VGENERAL catalog. The default is SYS1. John Ayon z/OS Server Technology - Technology Specialist Phone: (616) 791-3623 Fax: (616) 791-5131 [EMAIL PROTECTED] These opinions are mine and not necessarily those of my employer, Meijer Great Lakes Limited Partnership -Original Message- From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On Behalf Of Richbourg, Claude Sent: Thursday, June 19, 2008 10:39 AM To: IBM-MAIN@BAMA.UA.EDU Subject: TCBD call error. All, Our test lpar is now on z/OS 1.9 since Tuesday and all is well except for the 'tape processing'. We have a 3494 ATL and a B10 virtual environment. All parts of it are fine except for the VOLCAT. When you start OAM, it cannot communicate with the volcat. Also, when I try to list volumes within ISMF, it gets the TCBD CALL ERROR'. When I try to create or delete an entry in the volcat, same results. I can run a LISTCAT fine and it displays al the tape entries. The volcat is import connected to the new MASTER CAT. A listcat of the Master shows it. There has been no issue on our devl lpar with z/OS 1.9 and the tape processing. Something is amiss here and I can't put my finger on it. I have an open PMR with the OAM and CATALOG folks, but nothing yet. Does anyone here have any idea why I cannot 'get to the volcat' from batch or ISMF? All SMS routines are fine and I even re-drove them. It was all okay under z/OS 1.7 prior to the IPL of z/OS 1.9. Confused, Claude -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: ICF catalogs with IMBED
Dino Software has the free offer on their website. Go to the following URL and page down to the bottom of the page: http://www.dino-software.com/downloads/pdf/IMBEDDetails.pdf John Ayon z/OS Server Technology - Technology Specialist Phone: (616) 791-3623 Fax: (616) 791-5131 [EMAIL PROTECTED] These opinions are mine and not necessarily those of my employer, Meijer Great Lakes Limited Partnership -Original Message- From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On Behalf Of Choate, Bill Sent: Thursday, December 14, 2006 11:20 AM To: IBM-MAIN@BAMA.UA.EDU Subject: Re: ICF catalogs with IMBED I don't know if Dino Software is still doing this or not, but at one point they were allowing free use of TREX to clean up imbed replicate. Bill -Original Message- From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On Behalf Of McKown, John Sent: Thursday, December 14, 2006 10:44 AM To: IBM-MAIN@BAMA.UA.EDU Subject: Re: ICF catalogs with IMBED I know of that tool. But I'm not too sure that the powers-that-be will be willing to purchase any new software on a system which is going away in 3 to 5 years. My team leader has gotten more information on it, and it looks really NICE! === snip -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: CA Easytrieve on z9 box
I had talked to CA about QO72665. They wrote back: The Apar QO72665 fix can only be applied to Gen0303. There is no fix for EZT+ 6.4 Gen0202. You will need to upgrade your EZTPLS from Gen0202 to Gen0303, to run error free with EZT+ for the z9 processor. John Ayon z/OS Server Technology - Technology Specialist Phone: (616) 791-3623 Fax: (616) 791-5131 [EMAIL PROTECTED] These opinions are mine and not necessarily those of my employer, Meijer Great Lakes Limited Partnership -Original Message- From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On Behalf Of Pommier, Rex R. Sent: Tuesday, October 03, 2006 6:26 PM To: IBM-MAIN@BAMA.UA.EDU Subject: Re: CA Easytrieve on z9 box John, you may need this one depending on your level of z/OS. In my earlier post I said I am on 1.4. The description of the CA APAR is PROBLEM DESCRIPTION: *0311* ABEND IN COMPILE AFTER OS UPGRADE And it is for specific situations in the eztrieve code. I am planning on migrating to z/OS 1.7 and would guess that I will need this APAR at that time, so, thanks Lucy! :-) Rex Lucy wrote: Hello, We are running V6.4 Gen 0202 on a Z9 box and it is working well except for 1 fix we had to apply: QO72665 If you have any more questions Call Diane at CA 630-505-6776 - she is the one we worked with. Lucy Is anyone running Easytrieve v6.4 Gen0202 on a z9 box (2094-604)? CA's answer is go to the latest version, but we have time constraints. John Ayon z/OS Server Technology - Technology Specialist -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: z/OS downloads
We just ordered the Exploitation Support through ShopzSeries. John Ayon z/OS Server Technology - Technology Specialist Phone: (616) 791-3623 Fax: (616) 791-5131 [EMAIL PROTECTED] These opinions are mine and not necessarily those of my employer, Meijer Great Lakes Limited Partnership -Original Message- From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On Behalf Of R.S. Sent: Tuesday, October 03, 2006 9:57 AM To: IBM-MAIN@BAMA.UA.EDU Subject: z/OS downloads I tried to find the following web-deliverables: z/OS V1.4 z990 Exploitation Support z/OS.e V1.4 z990 Coexistence Update However the page http://www.ibm.com/servers/eserver/zseries/zos/downloads/ does not contain any links to the deliverables. WHY ??? z/OS 1.4 is still supported, even older deliverables are available on the page, but not those two. Where can I find those packages ? -- Radoslaw Skorupka Lodz, Poland -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
CA Easytrieve on z9 box
Is anyone running Easytrieve v6.4 Gen0202 on a z9 box (2094-604)? CA's answer is go to the latest version, but we have time constraints. John Ayon z/OS Server Technology - Technology Specialist Phone: (616) 791-3623 Fax: (616) 791-5131 [EMAIL PROTECTED] These opinions are mine and not necessarily those of my employer, Meijer Great Lakes Limited Partnership -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: WLM init without scheduling environment
It will run on any system that has a WLM initiator. It completely ignores the WLM scheduling environment resources, but I think it still uses WLM to pick the system that will give it the best performance. John Ayon z/OS Server Technology - Technology Specialist Phone: (616) 791-3623 Fax: (616) 791-5131 [EMAIL PROTECTED] These opinions are mine and not necessarily those of my employer, Meijer Great Lakes Limited Partnership -Original Message- From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On Behalf Of Larry Kraus Sent: Friday, March 31, 2006 10:21 AM To: IBM-MAIN@BAMA.UA.EDU Subject: WLM init without scheduling environment Can someone explain how WLM works if someone submits a job using a WLM jobclass, but they don't specify a scheduling environment? Is there a default scheduling environment? The job does run. Disclaimer: This e-mail message is intended only for the personal use of the recipient(s) named above. If you are not an intended recipient, you may not review, copy or distribute this message. If you have received this communication in error, please notify us immediately by e-mail and delete the original message. This e-mail expresses views only of the sender, which are not to be attributed to Rite Aid Corporation and may not be copied or distributed without this statement. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html