HCD Write Error
Working in HCD and looking to 'Build IOCDS' to be used for the next ipl. The build ends with the 'write protect' error below. According to the IOCP message guide it states; ' ICP408I IOCDS Ax IS WRITE PROTECTED Explanation: IOCP attempted to write an IOCDS to the support element hard disk but the IOCDS is write-protected. System action: IOCP ends the write operation. Programmer response: Remove the write protection and rerun the job. To remove the write protection, use Disable Write Protection under Options on the Input/Output Configuration panel.' First I do not see any 'disable write protection' option in the hcd panels as stated above in the iocp guide, second I was able to build a new IOCDS back in Dec to A0 with no problems. I have exhausted the iocp guide and the hcd guide and did find the specifics to disable write protection, although it was mentioned in the hcd options I'm just not see it. HDC outout listing error; ICP408I IOCDS A1 IS WRITE PROTECTED ICP058I IOCP DID NOT WRITE IOCDS A1 ICP051I IOCP VERSION 02.02.00 TERMINATED. CODE=41 CBD.CPC.IOCDS - my userid has update auth to this profile. How do I disable the write protection? Tks Matt -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: HCD Write Error
Matt, that needs to be done from the HMC... -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: HCD Write Error
Forgot to mention I looked in the hmc, can anyone be specific? -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] On Behalf Of Mary Anne Matyaz Sent: Wednesday, February 09, 2011 11:58 AM To: IBM-MAIN@bama.ua.edu Subject: Re: HCD Write Error Matt, that needs to be done from the HMC... -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: HCD Write Error
You put an E or is it a W? next to the IOCDS. -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] On Behalf Of Dazzo, Matt Sent: Wednesday, February 09, 2011 10:57 To: IBM-MAIN@bama.ua.edu Subject: HCD Write Error Working in HCD and looking to 'Build IOCDS' to be used for the next ipl. The build ends with the 'write protect' error below. According to the IOCP message guide it states; ' ICP408I IOCDS Ax IS WRITE PROTECTED Explanation: IOCP attempted to write an IOCDS to the support element hard disk but the IOCDS is write-protected. System action: IOCP ends the write operation. Programmer response: Remove the write protection and rerun the job. To remove the write protection, use Disable Write Protection under Options on the Input/Output Configuration panel.' First I do not see any 'disable write protection' option in the hcd panels as stated above in the iocp guide, second I was able to build a new IOCDS back in Dec to A0 with no problems. I have exhausted the iocp guide and the hcd guide and did find the specifics to disable write protection, although it was mentioned in the hcd options I'm just not see it. HDC outout listing error; ICP408I IOCDS A1 IS WRITE PROTECTED ICP058I IOCP DID NOT WRITE IOCDS A1 ICP051I IOCP VERSION 02.02.00 TERMINATED. CODE=41 CBD.CPC.IOCDS - my userid has update auth to this profile. How do I disable the write protection? Tks Matt -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: HCD Write Error
Sorry Matt. Select Defined CPC's and highlight your processor, then click Single Object Operations from the 'Recovery' Task. When you get to single object, click your processor again then click Input/Output Configuration on the 'Operational Customization' task. A screen comes up that has A0, A1, etc. Select the IOCDS you are working with and then click options, then disable write protection. MA -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: HCD Write Error
Woops - this works if you are in HCD and have done a 2.11.I sequence. -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] On Behalf Of Field, Alan C. Sent: Wednesday, February 09, 2011 11:07 To: IBM-MAIN@bama.ua.edu Subject: Re: HCD Write Error You put an E or is it a W? next to the IOCDS. -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] On Behalf Of Dazzo, Matt Sent: Wednesday, February 09, 2011 10:57 To: IBM-MAIN@bama.ua.edu Subject: HCD Write Error Working in HCD and looking to 'Build IOCDS' to be used for the next ipl. The build ends with the 'write protect' error below. According to the IOCP message guide it states; ' ICP408I IOCDS Ax IS WRITE PROTECTED Explanation: IOCP attempted to write an IOCDS to the support element hard disk but the IOCDS is write-protected. System action: IOCP ends the write operation. Programmer response: Remove the write protection and rerun the job. To remove the write protection, use Disable Write Protection under Options on the Input/Output Configuration panel.' First I do not see any 'disable write protection' option in the hcd panels as stated above in the iocp guide, second I was able to build a new IOCDS back in Dec to A0 with no problems. I have exhausted the iocp guide and the hcd guide and did find the specifics to disable write protection, although it was mentioned in the hcd options I'm just not see it. HDC outout listing error; ICP408I IOCDS A1 IS WRITE PROTECTED ICP058I IOCP DID NOT WRITE IOCDS A1 ICP051I IOCP VERSION 02.02.00 TERMINATED. CODE=41 CBD.CPC.IOCDS - my userid has update auth to this profile. How do I disable the write protection? Tks Matt -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: HCD Write Error
My first assumption is that you are trying to overlay the active IOCDS. Could that be the issue? -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] On Behalf Of Dazzo, Matt Sent: Wednesday, February 09, 2011 10:57 AM To: IBM-MAIN@bama.ua.edu Subject: HCD Write Error Working in HCD and looking to 'Build IOCDS' to be used for the next ipl. The build ends with the 'write protect' error below. According to the IOCP message guide it states; ' ICP408I IOCDS Ax IS WRITE PROTECTED Explanation: IOCP attempted to write an IOCDS to the support element hard disk but the IOCDS is write-protected. System action: IOCP ends the write operation. Programmer response: Remove the write protection and rerun the job. To remove the write protection, use Disable Write Protection under Options on the Input/Output Configuration panel.' First I do not see any 'disable write protection' option in the hcd panels as stated above in the iocp guide, second I was able to build a new IOCDS back in Dec to A0 with no problems. I have exhausted the iocp guide and the hcd guide and did find the specifics to disable write protection, although it was mentioned in the hcd options I'm just not see it. HDC outout listing error; ICP408I IOCDS A1 IS WRITE PROTECTED ICP058I IOCP DID NOT WRITE IOCDS A1 ICP051I IOCP VERSION 02.02.00 TERMINATED. CODE=41 CBD.CPC.IOCDS - my userid has update auth to this profile. How do I disable the write protection? Tks Matt -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html NOTICE: This electronic mail message and any files transmitted with it are intended exclusively for the individual or entity to which it is addressed. The message, together with any attachment, may contain confidential and/or privileged information. Any unauthorized review, use, printing, saving, copying, disclosure or distribution is strictly prohibited. If you have received this message in error, please immediately advise the sender by reply email and delete all copies. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: HCD Write Error
Matt: You must perform this from the Service Element or logon to the service element from the HMC. Go to Groups and select Defined CPCs. Right click the desired CPC's icon, select Recovery and then Single Object Operations from the pull down lists (this assumes you are using the HMC in compatibility mode and have the HMC code that is the Linux version). Once logged onto the SE, right click the CPC icon, then select CPC Configuration and then Input/Output (I/O) Configuration from the pull down lists. The resulting screen will show you the IOCDS files. Select the one you want to unprotect and and change it's write-protected status. Then you can rerun your IOCDS generation and the IOCDS will be updated. You may want to repeat the process and protect your new IOCDS. Mike Myers Mentor Services Corporation -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: HCD Write Error
Matt: You must perform this from the Service Element or logon to the service element from the HMC. Go to Groups and select Defined CPCs. Right click the desired CPC's icon, select Recovery and then Single Object Operations from the pull down lists (this assumes you are using the HMC in compatibility mode and have the HMC code that is the Linux version). Once logged onto the SE, right click the CPC icon, then select CPC Configuration and then Input/Output (I/O) Configuration from the pull down lists. The resulting screen will show you the IOCDS files. Select the one you want to unprotect and and change it's write-protected status. Then you can rerun your IOCDS generation and the IOCDS will be updated. You may want to repeat the process and protect your new IOCDS. Mike Myers Mentor Services Corporation On 2/9/2011 11:56 AM, Dazzo, Matt wrote: Working in HCD and looking to 'Build IOCDS' to be used for the next ipl. The build ends with the 'write protect' error below. According to the IOCP message guide it states; ' ICP408I IOCDS Ax IS WRITE PROTECTED Explanation: IOCP attempted to write an IOCDS to the support element hard disk but the IOCDS is write-protected. System action: IOCP ends the write operation. Programmer response: Remove the write protection and rerun the job. To remove the write protection, use Disable Write Protection under Options on the Input/Output Configuration panel.' First I do not see any 'disable write protection' option in the hcd panels as stated above in the iocp guide, second I was able to build a new IOCDS back in Dec to A0 with no problems. I have exhausted the iocp guide and the hcd guide and did find the specifics to disable write protection, although it was mentioned in the hcd options I'm just not see it. HDC outout listing error; ICP408I IOCDS A1 IS WRITE PROTECTED ICP058I IOCP DID NOT WRITE IOCDS A1 ICP051I IOCP VERSION 02.02.00 TERMINATED. CODE=41 CBD.CPC.IOCDS - my userid has update auth to this profile. How do I disable the write protection? Tks Matt -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: HCD Write Error
HCD 2 - 11 then / on the processor line and then option 1 allows control of the IOCDS's. No need to access the HMC Jerry Whitteridge Design Engineer Safeway Inc. 925 951 4184 If you feel in control you just aren't going fast enough. -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] On Behalf Of Mike Myers Sent: Wednesday, February 09, 2011 10:21 AM To: IBM-MAIN@bama.ua.edu Subject: Re: HCD Write Error Matt: You must perform this from the Service Element or logon to the service element from the HMC. Go to Groups and select Defined CPCs. Right click the desired CPC's icon, select Recovery and then Single Object Operations from the pull down lists (this assumes you are using the HMC in compatibility mode and have the HMC code that is the Linux version). Once logged onto the SE, right click the CPC icon, then select CPC Configuration and then Input/Output (I/O) Configuration from the pull down lists. The resulting screen will show you the IOCDS files. Select the one you want to unprotect and and change it's write-protected status. Then you can rerun your IOCDS generation and the IOCDS will be updated. You may want to repeat the process and protect your new IOCDS. Mike Myers Mentor Services Corporation On 2/9/2011 11:56 AM, Dazzo, Matt wrote: Working in HCD and looking to 'Build IOCDS' to be used for the next ipl. The build ends with the 'write protect' error below. According to the IOCP message guide it states; ' ICP408I IOCDS Ax IS WRITE PROTECTED Explanation: IOCP attempted to write an IOCDS to the support element hard disk but the IOCDS is write-protected. System action: IOCP ends the write operation. Programmer response: Remove the write protection and rerun the job. To remove the write protection, use Disable Write Protection under Options on the Input/Output Configuration panel.' First I do not see any 'disable write protection' option in the hcd panels as stated above in the iocp guide, second I was able to build a new IOCDS back in Dec to A0 with no problems. I have exhausted the iocp guide and the hcd guide and did find the specifics to disable write protection, although it was mentioned in the hcd options I'm just not see it. HDC outout listing error; ICP408I IOCDS A1 IS WRITE PROTECTED ICP058I IOCP DID NOT WRITE IOCDS A1 ICP051I IOCP VERSION 02.02.00 TERMINATED. CODE=41 CBD.CPC.IOCDS - my userid has update auth to this profile. How do I disable the write protection? Tks Matt -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html Email Firewall made the following annotations. -- Warning: All e-mail sent to this address will be received by the corporate e-mail system, and is subject to archival and review by someone other than the recipient. This e-mail may contain proprietary information and is intended only for the use of the intended recipient(s). If the reader of this message is not the intended recipient(s), you are notified that you have received this message in error and that any review, dissemination, distribution or copying of this message is strictly prohibited. If you have received this message in error, please notify the sender immediately. == -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: HCD Write Error
That was it, thanks Mary Anne. Tks to all who responded. -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] On Behalf Of Mary Anne Matyaz Sent: Wednesday, February 09, 2011 12:13 PM To: IBM-MAIN@bama.ua.edu Subject: Re: HCD Write Error Sorry Matt. Select Defined CPC's and highlight your processor, then click Single Object Operations from the 'Recovery' Task. When you get to single object, click your processor again then click Input/Output Configuration on the 'Operational Customization' task. A screen comes up that has A0, A1, etc. Select the IOCDS you are working with and then click options, then disable write protection. MA -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: HCD Write Error
I think I'll point out that you really don't want to overwrite your active IOCDS. Pick and unlock an older one :) Dave Gibney Information Technology Services Washington State University -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] On Behalf Of Dazzo, Matt Sent: Wednesday, February 09, 2011 10:53 AM To: IBM-MAIN@bama.ua.edu Subject: Re: HCD Write Error That was it, thanks Mary Anne. Tks to all who responded. -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@bama.ua.edu] On Behalf Of Mary Anne Matyaz Sent: Wednesday, February 09, 2011 12:13 PM To: IBM-MAIN@bama.ua.edu Subject: Re: HCD Write Error Sorry Matt. Select Defined CPC's and highlight your processor, then click Single Object Operations from the 'Recovery' Task. When you get to single object, click your processor again then click Input/Output Configuration on the 'Operational Customization' task. A screen comes up that has A0, A1, etc. Select the IOCDS you are working with and then click options, then disable write protection. MA -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: HCD Write Error
Dazzo, Matt pisze: Forgot to mention I looked in the hmc, can anyone be specific? Yes. Use HCD dialogs. Option 2 - 11 - s - w 2. Activate or process configuration data 11. Build and manage S/390 microprocessor IOCDSs and IPL attributes 1. Work with IOCDSs . . . . . . . . . . (s) 1. Update IOCDS . . . . . . . . . . . . (u) 2. Switch IOCDS . . . . . . . . . . . . (s) 3. Enable write protection . . . . . . (e) 4. Disable write protection . . . . . . (w) AFAIR HMC can also be used for that purpose, but you already use HCD dialogs. HTH -- Radoslaw Skorupka Lodz, Poland -- BRE Bank SA ul. Senatorska 18 00-950 Warszawa www.brebank.pl Sd Rejonowy dla m. st. Warszawy XII Wydzia Gospodarczy Krajowego Rejestru Sdowego, nr rejestru przedsibiorców KRS 025237 NIP: 526-021-50-88 Wedug stanu na dzie 16.07.2010 r. kapita zakadowy BRE Banku SA (w caoci wpacony) wynosi 168.248.328 zotych. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html