Re: CA-View

[Beesley, Paul]

Gerry

We don't allow tape mounts from CA-View due to the length of time taken
to do a mount ( although in these days of virtual tape it's a lot
quicker ).
Instead, users use the J line command to generate a batch job to print
the output ( or L  to reload it to disk ).

>From the CA-View user manual :
For all TSO users (both native TSO and ISPF/SPF), whether you are
authorized for online tape mounts is determined by how your system
administrator configured your account with the TSO ACCOUNT command.
Alternatively, your site may choose to disable all online tape mounts
for
Unicenter CA-View with the MOUNT=NO option.
  
hth.
Regards 

Paul 

-Original Message-
From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On
Behalf Of Gerry Anstey
Sent: 09 July 2008 10:21
To: IBM-MAIN@BAMA.UA.EDU
Subject: CA-View

All,

We have CA-View, when you select a job that has been archived to tape it
has this annoying habit of going off and getting it leaving the terminal
locked for a long time. Anyone know of a way of getting it to give you
the choice? Some sort of option somewhere? I have RTFM'd but if it's
there it's well hidden.

thank
Gerry Anstey




___

Atos Origin and Atos Consulting are trading names used by the Atos Origin 
group.  The following trading entities are registered in England and Wales:  
Atos Origin IT Services UK Limited (registered number 01245534) and Atos 
Consulting Limited (registered number 04312380).  The registered office for 
each is at 4 Triton Square, Regents Place, London, NW1 3HG.

This e-mail and the documents attached are confidential and intended solely for 
the addressee, and may contain confidential or privileged information.  If you 
receive this e-mail in error, you are not authorised to copy, disclose, use or 
retain it.  Please notify the sender immediately and delete this email from 
your systems.   As emails may be intercepted, amended or lost, they are not 
secure.  Atos Origin therefore can accept no liability for any errors or their 
content.  Although Atos Origin endeavours to maintain a virus-free network, we 
do not warrant that this transmission is virus-free and can accept no liability 
for any damages resulting from any virus transmitted.   The risks are deemed to 
be accepted by everyone who communicates with Atos Origin by email. 
___

--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO
Search the archives at http://bama.ua.edu/archives/ibm-main.html

Re: CA-View

[Gerry Anstey]

Paul, thanks,  we do want to allow tape mounts but would like somehow to be
given some sort of choice of offline processing when someone selects a job
that is on Virtual tape. Our users use S or ? to select the job and by then
it is too late to avoid the terminal lock for it seems like 10mins or more.
Before CA-view we had AVRS, in a similar situation it would just come back
and say the job was archived and you could choose retrieve or not. Quite
often when selecting a job a user has no idea that it is in fact archived.

any ideas anyone?

Gerry


   
 "Beesley, Paul"   
 <[EMAIL PROTECTED] 
 SORIGIN.COM>   To 
 Sent by: IBM  IBM-MAIN@BAMA.UA.EDU
 Mainframe  cc 
 Discussion List   
 <[EMAIL PROTECTED] Subject 
 .EDU>         Re: CA-View 
   
   
 09/07/2008 10:45  
   
   
 Please respond to 
   IBM Mainframe   
  Discussion List  
 <[EMAIL PROTECTED] 
   .EDU>   
   
   




Gerry

We don't allow tape mounts from CA-View due to the length of time taken
to do a mount ( although in these days of virtual tape it's a lot
quicker ).
Instead, users use the J line command to generate a batch job to print
the output ( or L  to reload it to disk ).

>From the CA-View user manual :
For all TSO users (both native TSO and ISPF/SPF), whether you are
authorized for online tape mounts is determined by how your system
administrator configured your account with the TSO ACCOUNT command.
Alternatively, your site may choose to disable all online tape mounts
for
Unicenter CA-View with the MOUNT=NO option.

hth.
Regards

Paul

-Original Message-
From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On
Behalf Of Gerry Anstey
Sent: 09 July 2008 10:21
To: IBM-MAIN@BAMA.UA.EDU
Subject: CA-View

All,

We have CA-View, when you select a job that has been archived to tape it
has this annoying habit of going off and getting it leaving the terminal
locked for a long time. Anyone know of a way of getting it to give you
the choice? Some sort of option somewhere? I have RTFM'd but if it's
there it's well hidden.

thank
Gerry Anstey


Search the archives at http://bama.ua.edu/archives/ibm-main.html



Generally, this communication is for informational purposes only
and it is not intended as an offer or solicitation for the purchase
or sale of any financial instrument or as an official confirmation
of any transaction. In the event you are receiving the offering
materials attached below related to your interest in hedge funds or
private equity, this communication may be intended as an offer or
solicitation for the purchase or sale of such fund(s).  All market
prices, data and other information are not warranted as to
completeness or accuracy and are subject to change without notice.
Any comments or statements made herein do not necessarily reflect
those of JPMorgan Chase & Co., its subsidiaries and affiliates.

This transmission may contain information that is privileged,
confidential, legally privileged, and/or exempt from disclosure
under applicable law. If you are not the intended recipient, you
are hereby notified that any disclosure, copying, distribution, or
use of the information contained herein (including any reliance
thereon) is STRICTLY PROHIBITED. Although this transmission and any
attachments are believed to be free of any virus or other defect
that might affect any computer system into which it is received and
opened, it is the responsibility of the recipient to ensure that it
is virus free and no responsibility is accepted by JPMorgan Chase &
Co., its subsidiaries and affiliates, as applicable, for any loss
or damage arising in any way from its use. If you received this
transmission in error, pleas

Re: CA-View

[Mark Zelden]

As already said...  Turn mount off then if a person selects an archived report
they get a "no mount authority" error message.  

Mark
--
Mark Zelden
Sr. Software and Systems Architect - z/OS Team Lead
Zurich North America / Farmers Insurance Group - ZFUS G-ITO
mailto:[EMAIL PROTECTED]
z/OS Systems Programming expert at http://expertanswercenter.techtarget.com/
Mark's MVS Utilities: http://home.flash.net/~mzelden/mvsutil.html




On Wed, 9 Jul 2008 11:27:38 +0100, Gerry Anstey <[EMAIL PROTECTED]>
wrote:

>Paul, thanks,  we do want to allow tape mounts but would like somehow to be
>given some sort of choice of offline processing when someone selects a job
>that is on Virtual tape. Our users use S or ? to select the job and by then
>it is too late to avoid the terminal lock for it seems like 10mins or more.
>Before CA-view we had AVRS, in a similar situation it would just come back
>and say the job was archived and you could choose retrieve or not. Quite
>often when selecting a job a user has no idea that it is in fact archived.
>
>any ideas anyone?
>
>Gerry
>
>
>
> "Beesley, Paul"
> <[EMAIL PROTECTED]
> SORIGIN.COM>   To
> Sent by: IBM  IBM-MAIN@BAMA.UA.EDU
> Mainframe  cc
> Discussion List
> <[EMAIL PROTECTED] Subject
> .EDU> Re: CA-View
>
>
> 09/07/2008 10:45
>
>
> Please respond to
>   IBM Mainframe
>  Discussion List
> <[EMAIL PROTECTED]
>   .EDU>
>
>
>
>
>
>
>Gerry
>
>We don't allow tape mounts from CA-View due to the length of time taken
>to do a mount ( although in these days of virtual tape it's a lot
>quicker ).
>Instead, users use the J line command to generate a batch job to print
>the output ( or L  to reload it to disk ).
>
>From the CA-View user manual :
>For all TSO users (both native TSO and ISPF/SPF), whether you are
>authorized for online tape mounts is determined by how your system
>administrator configured your account with the TSO ACCOUNT command.
>Alternatively, your site may choose to disable all online tape mounts
>for
>Unicenter CA-View with the MOUNT=NO option.
>
>hth.
>Regards
>
>Paul
>
>-Original Message-
>From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On
>Behalf Of Gerry Anstey
>Sent: 09 July 2008 10:21
>To: IBM-MAIN@BAMA.UA.EDU
>Subject: CA-View
>
>All,
>
>We have CA-View, when you select a job that has been archived to tape it
>has this annoying habit of going off and getting it leaving the terminal
>locked for a long time. Anyone know of a way of getting it to give you
>the choice? Some sort of option somewhere? I have RTFM'd but if it's
>there it's well hidden.
>
>thank
>Gerry Anstey
>
>
>Search the archives at http://bama.ua.edu/archives/ibm-main.html
>
>
>
>Generally, this communication is for informational purposes only
>and it is not intended as an offer or solicitation for the purchase
>or sale of any financial instrument or as an official confirmation
>of any transaction. In the event you are receiving the offering
>materials attached below related to your interest in hedge funds or
>private equity, this communication may be intended as an offer or
>solicitation for the purchase or sale of such fund(s).  All market
>prices, data and other information are not warranted as to
>completeness or accuracy and are subject to change without notice.
>Any comments or statements made herein do not necessarily reflect
>those of JPMorgan Chase & Co., its subsidiaries and affiliates.
>
>This transmission may contain information that is privileged,
>confidential, legally privileged, and/or exempt from disclosure
>under applicable law. If you are not the intended recipient, you
>are hereby notified that any disclosure, copying, distribution, or
>use of the information contained herein (including any reliance
>thereon) is STRICTLY PROHIBITED. Although this transmission and any
>attachments are believed to be free of any virus or other defect
>that might affect any computer system into which it is received and
>opened, it is the responsibility of the recipient to ensure that it
>is virus free and no responsibility is accepted by JPMorgan Chase &
>Co., its subsidiaries and affiliates, as applicable, for any loss
>or damage arising in any way from its use. If you received this
>transmission in error, please immediately contact the sender and

Re: CA-View

[Gerry Anstey]

As already said we WANT to be able to mount but would like the choice of
whether to mount. Is there a way? eg in our previous product, in this
situation it would pause and give you the chance to Not do it.

Mark did you not read what I wrote? I ask because you are normally very
attentive.

GA


   
 Mark Zelden   
 <[EMAIL PROTECTED] 
 CHNA.COM>  To 
 Sent by: IBM  IBM-MAIN@BAMA.UA.EDU
 Mainframe  cc 
 Discussion List   
 <[EMAIL PROTECTED] Subject 
 .EDU>         Re: CA-View 
   
   
 09/07/2008 14:14  
   
   
 Please respond to 
   IBM Mainframe   
  Discussion List  
 <[EMAIL PROTECTED] 
   .EDU>   
   
   




As already said...  Turn mount off then if a person selects an archived
report
they get a "no mount authority" error message.

Mark
--
Mark Zelden
Sr. Software and Systems Architect - z/OS Team Lead
Zurich North America / Farmers Insurance Group - ZFUS G-ITO
mailto:[EMAIL PROTECTED]
z/OS Systems Programming expert at
http://expertanswercenter.techtarget.com/
Mark's MVS Utilities: http://home.flash.net/~mzelden/mvsutil.html




On Wed, 9 Jul 2008 11:27:38 +0100, Gerry Anstey <[EMAIL PROTECTED]>
wrote:

>Paul, thanks,  we do want to allow tape mounts but would like somehow to
be
>given some sort of choice of offline processing when someone selects a job
>that is on Virtual tape. Our users use S or ? to select the job and by
then
>it is too late to avoid the terminal lock for it seems like 10mins or
more.
>Before CA-view we had AVRS, in a similar situation it would just come back
>and say the job was archived and you could choose retrieve or not. Quite
>often when selecting a job a user has no idea that it is in fact archived.
>
>any ideas anyone?
>
>Gerry
>
>
>
> "Beesley, Paul"
> <[EMAIL PROTECTED]
> SORIGIN.COM>   To
> Sent by: IBM  IBM-MAIN@BAMA.UA.EDU
> Mainframe  cc
> Discussion List
>     <[EMAIL PROTECTED] Subject
> .EDU> Re: CA-View
>
>
> 09/07/2008 10:45
>
>
> Please respond to
>   IBM Mainframe
>  Discussion List
> <[EMAIL PROTECTED]
>   .EDU>
>
>
>
>
>
>
>Gerry
>
>We don't allow tape mounts from CA-View due to the length of time taken
>to do a mount ( although in these days of virtual tape it's a lot
>quicker ).
>Instead, users use the J line command to generate a batch job to print
>the output ( or L  to reload it to disk ).
>
>From the CA-View user manual :
>For all TSO users (both native TSO and ISPF/SPF), whether you are
>authorized for online tape mounts is determined by how your system
>administrator configured your account with the TSO ACCOUNT command.
>Alternatively, your site may choose to disable all online tape mounts
>for
>Unicenter CA-View with the MOUNT=NO option.
>
>hth.
>Regards
>
>Paul
>
>-Original Message-
>From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On
>Behalf Of Gerry Anstey
>Sent: 09 July 2008 10:21
>To: IBM-MAIN@BAMA.UA.EDU
>Subject: CA-View
>
>All,
>
>We have CA-View, when you select a job that has been archived to tape it
>has this annoying habit of going off and getting it leaving the terminal
>locked for a long time. Anyone know of a way of getting it to give you
>the 

Re: CA-View

[Jousma, David]

The only option that I am aware of to do what you ask is to disallow
online mounts, and make the user submit a batch job from the CA-VIEW
interface to run the job to reload the output to disk.  

-Original Message-
From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On
Behalf Of Gerry Anstey
Sent: Wednesday, July 09, 2008 11:13 AM
To: IBM-MAIN@BAMA.UA.EDU
Subject: Re: CA-View

As already said we WANT to be able to mount but would like the choice of
whether to mount. Is there a way? eg in our previous product, in this
situation it would pause and give you the chance to Not do it.

Mark did you not read what I wrote? I ask because you are normally very
attentive.


This e-mail transmission contains information that is confidential and may be 
privileged.   It is intended only for the addressee(s) named above. If you 
receive this e-mail in error, please do not read, copy or disseminate it in any 
manner. If you are not the intended recipient, any disclosure, copying, 
distribution or use of the contents of this information is prohibited. Please 
reply to the message immediately by informing the sender that the message was 
misdirected. After replying, please erase it from your computer system. Your 
assistance in correcting this error is appreciated.

--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO
Search the archives at http://bama.ua.edu/archives/ibm-main.html

Re: CA-View

[Beesley, Paul]

You can't do anything with the product as it is, but you may be able to
do something by adding functionality to  Lionel Dyck's CAVXTRT 
http://www.lbdsoftware.com/ispftools.html


Paul 


-Original Message-
From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On
Behalf Of Gerry Anstey
Sent: Wednesday, July 09, 2008 11:13 AM
To: IBM-MAIN@BAMA.UA.EDU
Subject: Re: CA-View

As already said we WANT to be able to mount but would like the choice of
whether to mount. Is there a way? eg in our previous product, in this
situation it would pause and give you the chance to Not do it.

Mark did you not read what I wrote? I ask because you are normally very
attentive.



___

Atos Origin and Atos Consulting are trading names used by the Atos Origin 
group.  The following trading entities are registered in England and Wales:  
Atos Origin IT Services UK Limited (registered number 01245534) and Atos 
Consulting Limited (registered number 04312380).  The registered office for 
each is at 4 Triton Square, Regents Place, London, NW1 3HG.

This e-mail and the documents attached are confidential and intended solely for 
the addressee, and may contain confidential or privileged information.  If you 
receive this e-mail in error, you are not authorised to copy, disclose, use or 
retain it.  Please notify the sender immediately and delete this email from 
your systems.   As emails may be intercepted, amended or lost, they are not 
secure.  Atos Origin therefore can accept no liability for any errors or their 
content.  Although Atos Origin endeavours to maintain a virus-free network, we 
do not warrant that this transmission is virus-free and can accept no liability 
for any damages resulting from any virus transmitted.   The risks are deemed to 
be accepted by everyone who communicates with Atos Origin by email. 
___

--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO
Search the archives at http://bama.ua.edu/archives/ibm-main.html

Re: CA-View

[Mark Zelden]

On Wed, 9 Jul 2008 16:12:41 +0100, Gerry Anstey <[EMAIL PROTECTED]>
wrote:

>As already said we WANT to be able to mount but would like the choice of
>whether to mount. Is there a way? eg in our previous product, in this
>situation it would pause and give you the chance to Not do it.
>

I think your only choice is to disable it or educate users to not use "S" when
they see the location is on tape.I think forcing a batch job for all
tape recalls
(virtual or not) is such not a bad thing, but I guess it would be a nice
enhancement
to be prompted.  Create a DAR with CA.

Mark
--
Mark Zelden
Sr. Software and Systems Architect - z/OS Team Lead
Zurich North America / Farmers Insurance Group - ZFUS G-ITO
mailto:[EMAIL PROTECTED]
z/OS Systems Programming expert at http://expertanswercenter.techtarget.com/
Mark's MVS Utilities: http://home.flash.net/~mzelden/mvsutil.html

--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO
Search the archives at http://bama.ua.edu/archives/ibm-main.html

Re: CA-View

[Ulrich Krueger]

That's odd, Gerry.
We've been using CA-VIEW and it's granddad, SAR, for years. We are at CA-VIEW
R11 at the moment and R11 has the capability to view individual SYSOUT datasets.
It looks like you're on rel. 2.0, so you're behind by one release and I don't
know for sure if that functionality was retrofitted via PTF.
To solve your problem, try this:
>From your CA-VIEW primary panel, switch to "ALL" mode instead of SARO (I don't
know, if it will make a difference, but we're all using ALL mode). Type "MODE
ALL" from the Command line, press Enter.
Your primary panel should look something like this:

CA-View ALL -- Primary Selection for YOUR.SAR.DB ---
Command ===>

Sysout ID ===> C*
Select By ===> R (R, I, IL, or IR)
Index Name===>   Value ===>
  ===> ===>
  ===> ===>
  ===> ===>

Selection Criteria:
   Generation ===> -0:1  (*, ALL, specific (n), relative (-n),
  range (n:m or -n:m))

   Date   ===>   (specific (mm/dd/), relative (-n),
  range(mm/dd/:mm/dd/ or -n:m))

Selection Options:Only specify to restrict selection
   Exceptions ===>X exceptions only, NX non exceptions only, AX/(blank) any
   Permanent  ===>P permanent only,  NP non permanent only,  AP/(blank) any

 Enter END command to terminate this CA-View session.

Next, forget all about page indexing and other advanced stuff you might find in
the manual. In our shop, all jobs are sent to CA-VIEW simply by MSGCLASS=X and
SYSOUT=* in the JCL. No exits. No indexing. No fancy stuff. Vanilla, no
sprinkles.

To view a job and it's associated SYSOUT datasets, be sure to put an "R" in the
"Select By" field.
Press Enter to pull up the SYSOUT Selection List. It'll show something like this
for me:

 CA-View ALL --- Sysout Selection List -
 Command ===>

 Sel  Sysout IDJobname  JobidArch Date  Time  LocLines  Pages Xcode
 ==>  ****  * **   *  *
 ?CUKRSCA1 CUKRSCA1 J0914404 02/07/2006 07:45 DISK1941 16
  CUKRSCA1 CUKRSCA1 J0894475 02/06/2006 07:19 DISK1939 16
  CUKRSCA5 CUKRSCA5 J0914670 02/07/2006 07:30 DISK2186 16

To view the entire job's SYSOUTs in one session, type an "S" into the Sel
column.
To see the list of individual SYSOUT datasets, select one of the jobs with a
question mark "?", press Enter.
If your release of CA-VIEW supports it, you should get something like this:

 CA-View ALL --- Data Set List --
 Command ===>

   ID ---> CUKRSCA1
   Job---> CUKRSCA1Jobid  ---> J0914404

Sel DDname   Stepname Procstep   DSID   Lines   Pages
JESMSGLG JES2   2  52   1
JESJCL   JES2   3 473   1
JESYSMSG JES2   41031   1
SYSPRINT PRESCAN  112  77   3
SYSOUT   SORTJOB  SORT114  31   1
S   SYSOUT   SORTPSW  SORT115  31   1
SYSOUT   SORTDSL  SORT116  31   1
SYSOUT   SORTDSV  SORT117  31   1

Each of these SYSOUTs is individually selectable by putting an "S" in the Sel
field.

Hope that answers your question. If not, feel free to ask.

Regards,
Ulrich Krueger
Mainframe Systems Services
National Semiconductor Corp.
Santa Clara, CA 95051
Tel:(408)721-8071Fax:(408)721-6526
Email: [EMAIL PROTECTED]
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO
Search the archives at http://bama.ua.edu/archives/ibm-main.html

Re: CA-VIEW (SARBCH)

[Somers Kevin]

What's wrong: at first glance, SARBCH is trying to perform an authorized 
instruction, or is certainly running as an authorized program. The LINKMVS host 
environment only works for unauthorized programs

I don't know how to solve this, though I'm sure someone else will be able to 
point you to the right direction.


Vriendelijke Groeten / Cordialement / Best Regards / Med Vänliga Hälsningar

Kevin Somers 
System Engineering Mainframe 
Volvo IT Belgium 

-Original Message-
From: IBM Mainframe Discussion List [mailto:ibm-m...@bama.ua.edu] On Behalf Of 
Gerry Anstey
Sent: dinsdag 8 september 2009 13:49
To: IBM-MAIN@bama.ua.edu
Subject: CA-VIEW (SARBCH)

Anyone any idea what's wring here:

I'm trying to call SARBCH from a REXX EXEC, this is what I keep getting:

IRX0250E System abend code 047, reason code .
IRX0255E Abend in host command SARBCH or address environment routine LINKMVS.
57 *-*  ADDRESS LINKMVS "SARBCH"
   +++ RC(-71) +++

Here is my coding:

"ALLOC DA(CAVIEW.SYSPRINT) F(SYSPRINT) NEW KEEP,
SPACE(2 2) LRECL(133) RECFM(F B)"
"ALLOC DA(CAVIEW.OUTFILE) F(OUTFILE) NEW KEEP,
   SPACE(10 10) LRECL(133) RECFM(F B)"
"ALLOC DA(CAVIEW.SYSIN) F(SYSIN) SHR"
"ALLOC DUMMY F(REPORT)"
/*"CALL *(SARBCH)"*/
ADDRESS LINKMVS "SARBCH"
"FREE F(SYSIN,SYSPRINT,OUTFILE,REPORT)"

Any ideas?

I looked up the message but it all seemed a bit vague, has anyone had any 
success calling SARBCH from REXX?

Thanks
Gerry Anstey




This email is confidential and subject to important disclaimers and
conditions including on offers for the purchase or sale of
securities, accuracy and completeness of information, viruses,
confidentiality, legal privilege, and legal entity disclaimers,
available at http://www.jpmorgan.com/pages/disclosures/email.  

--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO
Search the archives at http://bama.ua.edu/archives/ibm-main.html

--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO
Search the archives at http://bama.ua.edu/archives/ibm-main.html

Re: CA-VIEW (SARBCH)

[Beesley, Paul]

I think you'll need to add SARBCH to the AUTHPGM section of IKJTSO00 then 
refresh it with PARMLIB UPDATE(00) 


Regards
Paul 

-Original Message-
From: IBM Mainframe Discussion List [mailto:ibm-m...@bama.ua.edu] On Behalf Of 
Somers Kevin
Sent: 08 September 2009 13:08
To: IBM-MAIN@bama.ua.edu
Subject: Re: CA-VIEW (SARBCH)

What's wrong: at first glance, SARBCH is trying to perform an authorized 
instruction, or is certainly running as an authorized program. The LINKMVS host 
environment only works for unauthorized programs

I don't know how to solve this, though I'm sure someone else will be able to 
point you to the right direction.


Vriendelijke Groeten / Cordialement / Best Regards / Med Vänliga Hälsningar

Kevin Somers
System Engineering Mainframe
Volvo IT Belgium 



___

Atos Origin and Atos Consulting are trading names used by the Atos Origin 
group.  The following trading entities are registered in England and Wales:  
Atos Origin IT Services UK Limited (registered number 01245534) and Atos 
Consulting Limited (registered number 04312380).  The registered office for 
each is at 4 Triton Square, Regents Place, London, NW1 3HG.The VAT No. for each 
is: GB232327983

This e-mail and the documents attached are confidential and intended solely for 
the addressee, and may contain confidential or privileged information.  If you 
receive this e-mail in error, you are not authorised to copy, disclose, use or 
retain it.  Please notify the sender immediately and delete this email from 
your systems.   As emails may be intercepted, amended or lost, they are not 
secure.  Atos Origin therefore can accept no liability for any errors or their 
content.  Although Atos Origin endeavours to maintain a virus-free network, we 
do not warrant that this transmission is virus-free and can accept no liability 
for any damages resulting from any virus transmitted.   The risks are deemed to 
be accepted by everyone who communicates with Atos Origin by email. 
___

--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO
Search the archives at http://bama.ua.edu/archives/ibm-main.html

Re: CA-VIEW (SARBCH)

[Paul Gilmartin]

On Tue, 8 Sep 2009 14:16:01 +0100, Beesley, Paul wrote:

>I think you'll need to add SARBCH to the AUTHPGM section of IKJTSO00
>then refresh it with PARMLIB UPDATE(00)
>
I had not been aware that AUTHPGM is effective for LINKMVS; I had
thought it only affected CALL.

I notice that the OP had commented out CALL and replaced it with
LINKMVS.  But why?

CALL is available only under TSO; LINKMVS is equally available in
TSO, OMVS, and IRXJCL.  But shows that it must be run under TSO.

LINKMVS allows values to be returned in the PARMs, and multiple
PARMs.  I am not aware that either of these is possible with CALL.
But the OP's code shows no PARM.

-- gil

--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO
Search the archives at http://bama.ua.edu/archives/ibm-main.html

Re: CA-VIEW (SARBCH)

[Ted MacNEIL]

>I think you'll need to add SARBCH to the AUTHPGM section of IKJTSO00 then 
>refresh it with PARMLIB UPDATE(00) 

Won't do much good if you cannot use LINKMVS for authorised programmes.
-
Too busy driving to stop for gas!

--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO
Search the archives at http://bama.ua.edu/archives/ibm-main.html

Re: CA-VIEW (SARBCH)

[carlos roberto visconde]

You d`ont have authorization (RACF).

2009/9/8 Gerry Anstey 

> Anyone any idea what's wring here:
>
> I'm trying to call SARBCH from a REXX EXEC, this is what I keep getting:
>
> IRX0250E System abend code 047, reason code .
> IRX0255E Abend in host command SARBCH or address environment routine
> LINKMVS.
>57 *-*  ADDRESS LINKMVS "SARBCH"
>   +++ RC(-71) +++
>
> Here is my coding:
>
> "ALLOC DA(CAVIEW.SYSPRINT) F(SYSPRINT) NEW KEEP,
>SPACE(2 2) LRECL(133) RECFM(F B)"
> "ALLOC DA(CAVIEW.OUTFILE) F(OUTFILE) NEW KEEP,
>   SPACE(10 10) LRECL(133) RECFM(F B)"
> "ALLOC DA(CAVIEW.SYSIN) F(SYSIN) SHR"
> "ALLOC DUMMY F(REPORT)"
> /*"CALL *(SARBCH)"*/
> ADDRESS LINKMVS "SARBCH"
> "FREE F(SYSIN,SYSPRINT,OUTFILE,REPORT)"
>
> Any ideas?
>
> I looked up the message but it all seemed a bit vague, has anyone had any
> success calling SARBCH from REXX?
>
> Thanks
> Gerry Anstey
>
>
>
>
> This email is confidential and subject to important disclaimers and
> conditions including on offers for the purchase or sale of
> securities, accuracy and completeness of information, viruses,
> confidentiality, legal privilege, and legal entity disclaimers,
> available at http://www.jpmorgan.com/pages/disclosures/email.
>
> --
> For IBM-MAIN subscribe / signoff / archive access instructions,
> send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO
> Search the archives at http://bama.ua.edu/archives/ibm-main.html
>

--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO
Search the archives at http://bama.ua.edu/archives/ibm-main.html

Re: CA-VIEW (SARBCH)

[Neal Eckhardt]

On Tue, 8 Sep 2009 12:49:28 +0100, Gerry Anstey 
 wrote:

>Anyone any idea what's wring here:

>I'm trying to call SARBCH from a REXX EXEC, this is what I keep getting:

I do this every day. I use "CALL" with the fully qualified DSN, and SARBCH is 
included in both AUTHPGM and AUTHTSF in IJKTSOxx. I have to believe that it 
is required in both places to work as I usually test to make sure I make the 
fewest number of changes to get something to work.

Neal

--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO
Search the archives at http://bama.ua.edu/archives/ibm-main.html

Re: CA-VIEW (SARBCH)

[Binyamin Dissen]

On Tue, 8 Sep 2009 13:37:35 -0300 carlos roberto visconde
 wrote:

:>You d`ont have authorization (RACF).

RACF does not cause an S047.

The program requires APF and is being invoked in such a way that it is not
receiving it.

:>2009/9/8 Gerry Anstey 
:>
:>> Anyone any idea what's wring here:
:>>
:>> I'm trying to call SARBCH from a REXX EXEC, this is what I keep getting:
:>>
:>> IRX0250E System abend code 047, reason code .
:>> IRX0255E Abend in host command SARBCH or address environment routine
:>> LINKMVS.
:>>57 *-*  ADDRESS LINKMVS "SARBCH"
:>>   +++ RC(-71) +++
:>>
:>> Here is my coding:
:>>
:>> "ALLOC DA(CAVIEW.SYSPRINT) F(SYSPRINT) NEW KEEP,
:>>SPACE(2 2) LRECL(133) RECFM(F B)"
:>> "ALLOC DA(CAVIEW.OUTFILE) F(OUTFILE) NEW KEEP,
:>>   SPACE(10 10) LRECL(133) RECFM(F B)"
:>> "ALLOC DA(CAVIEW.SYSIN) F(SYSIN) SHR"
:>> "ALLOC DUMMY F(REPORT)"
:>> /*"CALL *(SARBCH)"*/
:>> ADDRESS LINKMVS "SARBCH"
:>> "FREE F(SYSIN,SYSPRINT,OUTFILE,REPORT)"
:>>
:>> Any ideas?
:>>
:>> I looked up the message but it all seemed a bit vague, has anyone had any
:>> success calling SARBCH from REXX?

--
Binyamin Dissen 
http://www.dissensoftware.com

Director, Dissen Software, Bar & Grill - Israel


Should you use the mailblocks package and expect a response from me,
you should preauthorize the dissensoftware.com domain.

I very rarely bother responding to challenge/response systems,
especially those from irresponsible companies.

--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO
Search the archives at http://bama.ua.edu/archives/ibm-main.html

Re: CA-VIEW (SARBCH)

[Staller, Allan]

AFAIK, CALL cannot be used from TSO for APF authorized execution,
because the TSO CALL command is not authorized.
Check the CBT tape. I know there are a few programs there that will do
what you want to accomplish, an APF authorized CALL.  


I do this every day. I use "CALL" with the fully qualified DSN, and
SARBCH is 
included in both AUTHPGM and AUTHTSF in IJKTSOxx. I have to believe that
it 
is required in both places to work as I usually test to make sure I make
the 
fewest number of changes to get something to work.


--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO
Search the archives at http://bama.ua.edu/archives/ibm-main.html

Re: CA-VIEW (SARBCH)

[Paul Gilmartin]

On Wed, 9 Sep 2009 07:39:01 -0500, Staller, Allan wrote:

>AFAIK, CALL cannot be used from TSO for APF authorized execution,
>because the TSO CALL command is not authorized.
>Check the CBT tape. I know there are a few programs there that will do
>what you want to accomplish, an APF authorized CALL.
>
TSO has elaborate mechanisms to support CALL of APF authorized programs;
used regularly for IDCAMS, IEBCOPY, and many others.

-- gil

--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO
Search the archives at http://bama.ua.edu/archives/ibm-main.html

Re: CA-VIEW (SARBCH)

[Shmuel Metz (Seymour J.)]

In <6cd8dd927eba514e9db1e36304be38d7117ad...@hou-mail.kbm1.loc>, on
09/09/2009
   at 07:39 AM, "Staller, Allan"  said:

>AFAIK, CALL cannot be used from TSO for APF authorized execution,

You've been able to do that since Old Man Noach cornered the market in
gopher wood. What did you think that the AUTHPGM list was for?

>because the TSO CALL command is not authorized.

The TSO CALL command is handled by the TMP.
 
-- 
 Shmuel (Seymour J.) Metz, SysProg and JOAT
 ISO position; see  
We don't care. We don't have to care, we're Congress.
(S877: The Shut up and Eat Your spam act of 2003)

--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO
Search the archives at http://bama.ua.edu/archives/ibm-main.html

Re: CA-View and alternate screen sizes

[Ray Mullins]

Could it be a misleading message - that it's trying to find a module for
27x132 support and failing? Release is probably the wrong word, but I can
see screen-size specific code (Software AG's COM-PLETE had (may still have)
some specific size modules for its mapping services).

Later,
Ray

-Original Message-
From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On Behalf
Of Chase, John
Sent: Thursday July 27 2006 10:45
To: IBM-MAIN@BAMA.UA.EDU
Subject: CA-View and alternate screen sizes

Hi, All,

While demonstrating the use of alternate screen sizes (e.g., 3278 model
5 and 3290) with CA-VIEW (formerly SAR from Goal Systems),  I encountered
the rather terse "EBCXMC90 USER TASK ABENDED" diagnostic in CICS (works fine
in TSO; works fine in CICS with 24x80 screen size).  No dump was produced,
and no other messages were logged anywhere.

The CA-View doc decodes message EBCXMC90 as "Release dependent program not
found".  Heretofore the only "release dependent" program in CA-VIEW for CICS
has been their CICS initialization module, and we have that particular
program (alias) in the relevant load library (if it wasn't present, CA-VIEW
wouldn't work at all).  So before I holler at CA, can anybody say what other
"release dependent program" VIEW might be looking for to support alternate
screen sizes in CICS?

--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO
Search the archives at http://bama.ua.edu/archives/ibm-main.html

Re: CA-View and alternate screen sizes

[Ulrich Krueger]

John,
the CA Knowledgebase has one hit on this, with a PTF depending on the EBC
release that you're running.
PTF numbers are QO58515 (for EBC 2.2) or QO58516 (EBC 2.3)

What CA-VIEW release are you on? R11, I hope?

Regards,
Ulrich Krueger
Mainframe Systems Services
National Semiconductor Corp.
Santa Clara, CA 95051
Tel: (408) 721-8071
Email: [EMAIL PROTECTED]


"IBM Mainframe Discussion List"  wrote on 07/27/2006
10:44:32 AM:

> Hi, All,
>
> While demonstrating the use of alternate screen sizes (e.g., 3278 model
> 5 and 3290) with CA-VIEW (formerly SAR from Goal Systems),  I
> encountered the rather terse "EBCXMC90 USER TASK ABENDED" diagnostic in
> CICS (works fine in TSO; works fine in CICS with 24x80 screen size).  No
> dump was produced, and no other messages were logged anywhere.
>
> The CA-View doc decodes message EBCXMC90 as "Release dependent program
> not found".  Heretofore the only "release dependent" program in CA-VIEW
> for CICS has been their CICS initialization module, and we have that
> particular program (alias) in the relevant load library (if it wasn't
> present, CA-VIEW wouldn't work at all).  So before I holler at CA, can
> anybody say what other "release dependent program" VIEW might be looking
> for to support alternate screen sizes in CICS?
>
> TIA,
>
> -jc-
>
> --
> For IBM-MAIN subscribe / signoff / archive access instructions,
> send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO
> Search the archives at http://bama.ua.edu/archives/ibm-main.html
>

--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO
Search the archives at http://bama.ua.edu/archives/ibm-main.html

Re: CA-View and alternate screen sizes

[Chase, John]

> -Original Message-
> From: IBM Mainframe Discussion List On Behalf Of Ray Mullins
> 
> Could it be a misleading message - that it's trying to find a 
> module for
> 27x132 support and failing?

It's possible.  The text "EBCXMC90 USER TASK ABENDED" appears hard-coded
in the abending module.  CICS auxtrace shows only a LENGERR condition on
a RECEIVE TC (terminal receive) operation, followed by the usual abend
generation stuff.  Don't know why it doesn't log anything or produce a
dump; guess I'll have to browse the load module and try to decipher the
options specified on the HANDLE ABEND that was issued earlier in the
program.

> Release is probably the wrong 
> word, but I can see screen-size specific code (Software AG's 
> COM-PLETE had (may still have) some specific size modules for 
> its mapping services).

ISTR successfully showing a model 5 screen display in a previous release
of CICS (might have been TS 1.3; we're on TS 2.3 now).

-jc-

--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO
Search the archives at http://bama.ua.edu/archives/ibm-main.html

Re: CA-View and alternate screen sizes

[Chase, John]

> -Original Message-
> From: IBM Mainframe Discussion List On Behalf Of Ulrich Krueger
> 
> John,
> the CA Knowledgebase has one hit on this, with a PTF 
> depending on the EBC release that you're running.
> PTF numbers are QO58515 (for EBC 2.2) or QO58516 (EBC 2.3)
> 
> What CA-VIEW release are you on? R11, I hope?

R11 installation is "in progress" as we speak.  From the module names
I'd guess we have EBC 2.2 running at the moment.

Maybe I should tell the folks here that CICS alternate screensize
support is "coming in the release being installed".

Thanks for the pointer.

-jc-

--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO
Search the archives at http://bama.ua.edu/archives/ibm-main.html

Re: CA-View and alternate screen sizes

[Ulrich Krueger]

You're welcome, John.

As the saying goes, "your problem is fixed in the next release" ... :-)
Personally, I'd check out the PTFs and put them on, so as to avoid the problems
associated with it. Read the PTF description for more details.

By the way, if you use CA-VIEW under TSO/ISPF you may have seen this already,
but the only screens in CA-VIEW that will show more than 80 chars per line are
the ones showing report contents. The SYSOUT selection menus are hard formatted
to only give you 80 characters, regardless of screen width. You still need to
scroll right an left to see more columns. The menus don't reformat to adjust to
the screen width.

Regards,
Ulrich Krueger
Mainframe Systems Services
National Semiconductor Corp.
Santa Clara, CA 95051
Tel: (408) 721-8071
Email: [EMAIL PROTECTED]


"IBM Mainframe Discussion List"  wrote on 07/27/2006
11:33:00 AM:

> > -Original Message-
> > From: IBM Mainframe Discussion List On Behalf Of Ulrich Krueger
> >
> > John,
> > the CA Knowledgebase has one hit on this, with a PTF
> > depending on the EBC release that you're running.
> > PTF numbers are QO58515 (for EBC 2.2) or QO58516 (EBC 2.3)
> >
> > What CA-VIEW release are you on? R11, I hope?
>
> R11 installation is "in progress" as we speak.  From the module names
> I'd guess we have EBC 2.2 running at the moment.
>
> Maybe I should tell the folks here that CICS alternate screensize
> support is "coming in the release being installed".
>
> Thanks for the pointer.
>
> -jc-
>
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO
Search the archives at http://bama.ua.edu/archives/ibm-main.html