Re: PSF release printer
Hi Thank you for your help. Just to inform: It is a XEROX 92C DOCUPRINT, with TCP/IP IPDS . Now the XEROX is checking why don't send back the DOCUPRINT software the proper response to the PSF -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: PSF release printer
Hi For one printer the DISCINTV works, for another it waits seems to me, in a READ/SELECT. (One is an inhouse LAN, another one is in another location) The working one is a 4028 device, the wrong one is a 3935 device. Mit freundlichen Grüßen / Best regards Miklos Szigetvari ISIS Information Systems GmbH Alter Wienerweg 12 2344 Maria Enzersdorf Austria --- This e-mail is only intended for the recipient and not legally binding. Unauthorised use, publication, reproduction or disclosure of the content of this e-mail is not permitted. This email has been checked for known viruses, but ISIS accepts no responsibility for malicious or inappropriate content. --- -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: PSF release printer
In a message dated 4/18/2006 3:53:43 A.M. Central Standard Time, [EMAIL PROTECTED] writes: We have some PSF TCP/IP attached printers in the network. I try to persuade the PSF to release the printer, close the session if nothing to do Till now without success The current settings: The only one I've really dealt with is 2150(big cut sheet). The printer engine has to be configured to match the IP settings. Since it's available by LAN as well as PSF. We found that for production runs the DISCONNECT interval has to be set to zero to keep from sharing with somebody printing Messages and codes during Ledger processing. The newer engines are directly available via IP address and there's a printer monitor downloadable from _www.printers.ibm.com_ (http://www.printers.ibm.com) Used to be something like NETPVM. Some flavors were better than others. First thing is print config from printer and see if it matches what you're PSF settings are. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: PSF release printer
Ed Finnell wrote: In a message dated 4/18/2006 3:53:43 A.M. Central Standard Time, [EMAIL PROTECTED] writes: We have some PSF TCP/IP attached printers in the network. I try to persuade the PSF to release the printer, close the session if nothing to do Till now without success The current settings: The only one I've really dealt with is 2150(big cut sheet). The printer engine has to be configured to match the IP settings. Since it's available by LAN as well as PSF. We found that for production runs the DISCONNECT interval has to be set to zero to keep from sharing with somebody printing Messages and codes during Ledger processing. The newer engines are directly available via IP address and there's a printer monitor downloadable from _www.printers.ibm.com_ (http://www.printers.ibm.com) Used to be something like NETPVM. Some flavors were better than others. First thing is print config from printer and see if it matches what you're PSF settings are. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html Hi Thank you Ed, I tried with DISCONNECT=0, but there is still a TCP/IP session from the host, and from the network they complain, they can't print as the host has the session with the IPDS port. -- Mit freundlichen Grüßen / Best regards Miklos Szigetvari ISIS Information Systems GmbH Alter Wienerweg 12 2344 Maria Enzersdorf Austria --- This e-mail is only intended for the recipient and not legally binding. Unauthorised use, publication, reproduction or disclosure of the content of this e-mail is not permitted. This email has been checked for known viruses, but ISIS accepts no responsibility for malicious or inappropriate content. --- -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: PSF release printer
You WANT to share, the person recommending DISCONNECT=0 wanted to PREVENT sharing. I compared your parms from the first note to mine and for IP printer sharing items, I don't see why it's not working. Make sure you are stopping and restarting the FSS, not just the JES printer, for parm changes. If that's not it, it's time to call PSF support. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: PSF release printer
In a message dated 4/18/2006 10:44:55 A.M. Central Standard Time, [EMAIL PROTECTED] writes: compared your parms from the first note to mine and for IP printer sharing items, I don't see why it's not working. Make sure you are stopping and restarting the FSS, not just the JES printer, for parm There's a PARM for FSS that says when printer is stopped FSS should stop. Again there's PARMs on both ends. PSF end AND Printer end for timeout values. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: PSF release printer
Rugen, Len wrote: You WANT to share, the person recommending DISCONNECT=0 wanted to PREVENT sharing. I compared your parms from the first note to mine and for IP printer sharing items, I don't see why it's not working. Make sure you are stopping and restarting the FSS, not just the JES printer, for parm changes. If that's not it, it's time to call PSF support. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html Hi If I cancel or stop the FSS printer, the tcp/ip session also ends, but it is not a solution for us. I have restarted, and while the FSS writer inactive, I see in the netstat the tcp/ip session, and F PRT16,DISPLAY,PRT16,STATUS=TCPIP APS639I PRT16T30 PRT16 *** COMMAND (DISPLAY) ACCEPTED. 982 APS699I TCP/IP DISPLAY STATUS 983 PENDING PRINTER... TCP/IP STATUS... COMMANDS. PRT16 READY TCP/IP IS ACTIVE SELECT-READ PRINTER ATTACHED I have opened a PMR. -- Mit freundlichen Grüßen / Best regards Miklos Szigetvari ISIS Information Systems GmbH Alter Wienerweg 12 2344 Maria Enzersdorf Austria --- This e-mail is only intended for the recipient and not legally binding. Unauthorised use, publication, reproduction or disclosure of the content of this e-mail is not permitted. This email has been checked for known viruses, but ISIS accepts no responsibility for malicious or inappropriate content. --- -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: PSF release printer
If you have your PSF settings correct you should see this on your HOST SYSLOG. APS929I PSFIP$P PSFIP$P HPRF330 PRT325 (TCPIP) 302 (CONT.) COMMUNICATION WITH TCP/IP-ATTACHED PRINTER (PRT325) IPADDR (CONT.) (192.168.75.244) WAS TERMINATED DUE TO A DISCONNECT INTERV (CONT.) TIMEOUT. Thanks, Desi de la Garza Systems Programmer Bexar County Information Services [EMAIL PROTECTED] -Original Message- From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On Behalf Of Miklos Szigetvari Sent: Tuesday, April 18, 2006 3:53 AM To: IBM-MAIN@BAMA.UA.EDU Subject: PSF release printer Hi We have some PSF TCP/IP attached printers in the network. I try to persuade the PSF to release the printer, close the session if nothing to do Till now without success The current settings: IPADDR='10.1.5.33', FAILURE=WCONNECT, TIMEOUT=REDRIVE, DISCINTV=5, RELMODE=IDLE, RELINTV=5, MGMTMODE=OUTAVAIL -- Mit freundlichen Grüßen / Best regards Miklos Szigetvari ISIS Information Systems GmbH Alter Wienerweg 12 2344 Maria Enzersdorf Austria --- This e-mail is only intended for the recipient and not legally binding. Unauthorised use, publication, reproduction or disclosure of the content of this e-mail is not permitted. This email has been checked for known viruses, but ISIS accepts no responsibility for malicious or inappropriate content. --- -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: PSF release printer
Hi Thank you all. We have two TCP/IP attached printers, for one it is working, I got the disconnect message etc., for the second one, no message the printer in SELECT READ status. Desi de la Garza wrote: If you have your PSF settings correct you should see this on your HOST SYSLOG. APS929I PSFIP$P PSFIP$P HPRF330 PRT325 (TCPIP) 302 (CONT.) COMMUNICATION WITH TCP/IP-ATTACHED PRINTER (PRT325) IPADDR (CONT.) (192.168.75.244) WAS TERMINATED DUE TO A DISCONNECT INTERV (CONT.) TIMEOUT. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: PSF release printer
So they both have the same PSF settings and only one is working? Thanks, Desi de la Garza Systems Programmer Bexar County Information Services [EMAIL PROTECTED] -Original Message- From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On Behalf Of Miklos Szigetvari Sent: Tuesday, April 18, 2006 11:52 AM To: IBM-MAIN@BAMA.UA.EDU Subject: Re: PSF release printer Hi Thank you all. We have two TCP/IP attached printers, for one it is working, I got the disconnect message etc., for the second one, no message the printer in SELECT READ status. Desi de la Garza wrote: If you have your PSF settings correct you should see this on your HOST SYSLOG. APS929I PSFIP$P PSFIP$P HPRF330 PRT325 (TCPIP) 302 (CONT.) COMMUNICATION WITH TCP/IP-ATTACHED PRINTER (PRT325) IPADDR (CONT.) (192.168.75.244) WAS TERMINATED DUE TO A DISCONNECT INTERV (CONT.) TIMEOUT. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: PSF release printer
In a message dated 4/18/2006 12:08:25 P.M. Central Standard Time, [EMAIL PROTECTED] writes: So they both have the same PSF settings and only one is working? I'd be tempted to switch the wires and see if problems follows? -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: PSF release printer
Remember that the network setting and IPDS settings at the printer end might also be causing the problem. -Original Message- From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On Behalf Of Ed Finnell Sent: Tuesday, April 18, 2006 12:50 PM To: IBM-MAIN@BAMA.UA.EDU Subject: Re: PSF release printer In a message dated 4/18/2006 12:08:25 P.M. Central Standard Time, [EMAIL PROTECTED] writes: So they both have the same PSF settings and only one is working? I'd be tempted to switch the wires and see if problems follows? -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
