Re: VTS Scratch Count Issue
Jacky, There are two main ways to tackle this situation, and likely you will need to do both. 1. The VTS is low on scratch volumes. The way DFSMSrmm handles this CBR3660A wto is to trigger a procedure for running expiration processing. Usually this is enough to return some volumes to scratch status. 2. If #1 does not give you enough scratch volumes you need to look at whether you really have enough defined in the VTS. If you really do need more logical volumes you have to follow the procedure to add/insert more logical volumes. You might want to refer to the redbook SG24-2229 where it states You insert logical volumes in a VTS by defining their volsers and their media type in the Library Manager's Insert Logical Volumes window (Figure 6-19). Physical cartridge movement is not involved. To access the window, select System management on the Library Manager Commands pull-down, then select Insert VTS logical volumes. Prior to inserting the extra logical volumes you should check how the tape management system will handle this; by default DFSMSrmm will automatically take ownership and add them to its CDS - but your system may be configured differently. Mike Wood RMM Development -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: VTS Scratch Count Issue
The only other area I might also consider is your backend tapes for the VTS should you decide to add more virtual tapes. Make sure you have enough of them to support any additions you might make to the VTS. Lizette There are two main ways to tackle this situation, and likely you will need to do both. 1. The VTS is low on scratch volumes. The way DFSMSrmm handles this CBR3660A wto is to trigger a procedure for running expiration processing. Usually this is enough to return some volumes to scratch status. 2. If #1 does not give you enough scratch volumes you need to look at whether you really have enough defined in the VTS. If you really do need more logical volumes you have to follow the procedure to add/insert more logical volumes. You might want to refer to the redbook SG24-2229 where it states You insert logical volumes in a VTS by defining their volsers and their media type in the Library Manager's Insert Logical Volumes window (Figure 6- 19). Physical cartridge movement is not involved. To access the window, select System management on the Library Manager Commands pull-down, then select Insert VTS logical volumes. Prior to inserting the extra logical volumes you should check how the tape management system will handle this; by default DFSMSrmm will automatically take ownership and add them to its CDS - but your system may be configured differently. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: VTS Scratch Count Issue
)--- 3494 Image 5.3, Rev. 5.39, for OS/2 Warp 4, a 5.37 update. IBM 3494 Library Manager Code Level 529.01 IBM 3494 Library Manager Code Level 529.10 Remote Library Manager Console Version 5.2 EC=F23225F IBM 3494 1 RTIC Expansion Attachment Version 1.00 Mirroring Hard Disk Drive Configuration. Feature 5220 PCI Ethernet Install (Intel) EC=H28116A --Alternate Code-(Unable to be ACTIVATED)--- IBM 3494 Library Manager Code Level 527.01 IBM 3494 Library Manager Code Level 527.21 LM--DUAL-AProcessor speed 1262 MHzMemory 511 MB Number of hard disk drives = 1 (MIRRORed disks) Hostname=lmA TCP/IP address=157.203.76.167 JAcky On 11/20/07, Vernooy, C.P. - SPLXM [EMAIL PROTECTED] wrote: It is difficult and dangerous to give an answer without knowing your configuration and VTS setup! Can't you find out who set up and controls the VTS, toghether with your tapemanagement system and other related subjects? Kees. Jacky Bright [EMAIL PROTECTED] wrote in message news:[EMAIL PROTECTED]... Hi , VTS is somewhat grey area for me. How can I add scratch volumes to VTS ? Someone told me there are 2-3 ways .. can anyone explain ? JAcky On 11/13/07, Weidt, James [EMAIL PROTECTED] wrote: Don't forget to verify that your tape management system has scratch records defined for the scratch volumes added to the vts. Thanks, Jim Weidt Senior Systems Engineer Jostens Inc. Office: 952-838-7555 Cell: 612-419-3738 [EMAIL PROTECTED] CONFIDENTIALITY NOTICE: The information contained in this e-mail communication and any attached documentation may be privileged, confidential or otherwise protected from disclosure and is intended only for the use of the designated recipient(s). It is not intended for transmission to, or receipt by, any unauthorized person. The use, distribution, transmittal or retransmittal by an unintended recipient of this communication is strictly prohibited. If you are not the intended recipient of this e-mail, please delete it from your system without copying it and notify the above sender. -Original Message- From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On Behalf Of Jacky Bright Sent: Tuesday, November 13, 2007 7:30 AM To: IBM-MAIN@BAMA.UA.EDU Subject: VTS Scratch Count Issue Hi, We are getting following message on console. Do I need to take action on this message ? Does anyone have an idea about this ? JAcky *CBR3660A Enter MEDIA2 scratch volumes into library WIPLIB01. Subsequently we have issued following command to check the status : D SMS,LIB(WIPLIB01),DETAIL F OAM,D,LIB,WIPLIB01,L=INTERNAL-Z CBR1110I OAM library status: 098 TAPE LIB DEVICETOT ONL AVL TOTAL EMPTY SCRTCH ON OP LIBRARY TYP TYPE DRV DRV DRV SLOTS SLOTS VOLS WIPLIB01 VL 3494-L10 64 41 40 1133660 0 Y Y -- MEDIA SCRATCH SCRATCH SCRATCH TYPE COUNT THRESHOLD CATEGORY MEDIA2060 3002 -- OPERATIONAL STATE: AUTOMATED ERROR CATEGORY SCRATCH COUNT: 1 SCRATCH STACKED VOLUME COUNT: 43 PRIVATE STACKED VOLUME COUNT: 399 -- Library supports import/export. Convenience I/O station installed. Convenience I/O station in Import mode. Bulk input/output not configured. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html ** For information, services and offers, please visit our web site: http://www.klm.com. This e-mail and any attachment may contain confidential and privileged material intended for the addressee only. If you are not the addressee, you are notified that no part of the e-mail or any attachment may be disclosed, copied or distributed
Re: VTS Scratch Count Issue
Hi , VTS is somewhat grey area for me. How can I add scratch volumes to VTS ? Someone told me there are 2-3 ways .. can anyone explain ? JAcky On 11/13/07, Weidt, James [EMAIL PROTECTED] wrote: Don't forget to verify that your tape management system has scratch records defined for the scratch volumes added to the vts. Thanks, Jim Weidt Senior Systems Engineer Jostens Inc. Office: 952-838-7555 Cell: 612-419-3738 [EMAIL PROTECTED] CONFIDENTIALITY NOTICE: The information contained in this e-mail communication and any attached documentation may be privileged, confidential or otherwise protected from disclosure and is intended only for the use of the designated recipient(s). It is not intended for transmission to, or receipt by, any unauthorized person. The use, distribution, transmittal or retransmittal by an unintended recipient of this communication is strictly prohibited. If you are not the intended recipient of this e-mail, please delete it from your system without copying it and notify the above sender. -Original Message- From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On Behalf Of Jacky Bright Sent: Tuesday, November 13, 2007 7:30 AM To: IBM-MAIN@BAMA.UA.EDU Subject: VTS Scratch Count Issue Hi, We are getting following message on console. Do I need to take action on this message ? Does anyone have an idea about this ? JAcky *CBR3660A Enter MEDIA2 scratch volumes into library WIPLIB01. Subsequently we have issued following command to check the status : D SMS,LIB(WIPLIB01),DETAIL F OAM,D,LIB,WIPLIB01,L=INTERNAL-Z CBR1110I OAM library status: 098 TAPE LIB DEVICETOT ONL AVL TOTAL EMPTY SCRTCH ON OP LIBRARY TYP TYPE DRV DRV DRV SLOTS SLOTS VOLS WIPLIB01 VL 3494-L10 64 41 40 1133660 0 Y Y -- MEDIA SCRATCH SCRATCH SCRATCH TYPE COUNT THRESHOLD CATEGORY MEDIA2060 3002 -- OPERATIONAL STATE: AUTOMATED ERROR CATEGORY SCRATCH COUNT: 1 SCRATCH STACKED VOLUME COUNT: 43 PRIVATE STACKED VOLUME COUNT: 399 -- Library supports import/export. Convenience I/O station installed. Convenience I/O station in Import mode. Bulk input/output not configured. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: VTS Scratch Count Issue
It is difficult and dangerous to give an answer without knowing your configuration and VTS setup! Can't you find out who set up and controls the VTS, toghether with your tapemanagement system and other related subjects? Kees. Jacky Bright [EMAIL PROTECTED] wrote in message news:[EMAIL PROTECTED]... Hi , VTS is somewhat grey area for me. How can I add scratch volumes to VTS ? Someone told me there are 2-3 ways .. can anyone explain ? JAcky On 11/13/07, Weidt, James [EMAIL PROTECTED] wrote: Don't forget to verify that your tape management system has scratch records defined for the scratch volumes added to the vts. Thanks, Jim Weidt Senior Systems Engineer Jostens Inc. Office: 952-838-7555 Cell: 612-419-3738 [EMAIL PROTECTED] CONFIDENTIALITY NOTICE: The information contained in this e-mail communication and any attached documentation may be privileged, confidential or otherwise protected from disclosure and is intended only for the use of the designated recipient(s). It is not intended for transmission to, or receipt by, any unauthorized person. The use, distribution, transmittal or retransmittal by an unintended recipient of this communication is strictly prohibited. If you are not the intended recipient of this e-mail, please delete it from your system without copying it and notify the above sender. -Original Message- From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On Behalf Of Jacky Bright Sent: Tuesday, November 13, 2007 7:30 AM To: IBM-MAIN@BAMA.UA.EDU Subject: VTS Scratch Count Issue Hi, We are getting following message on console. Do I need to take action on this message ? Does anyone have an idea about this ? JAcky *CBR3660A Enter MEDIA2 scratch volumes into library WIPLIB01. Subsequently we have issued following command to check the status : D SMS,LIB(WIPLIB01),DETAIL F OAM,D,LIB,WIPLIB01,L=INTERNAL-Z CBR1110I OAM library status: 098 TAPE LIB DEVICETOT ONL AVL TOTAL EMPTY SCRTCH ON OP LIBRARY TYP TYPE DRV DRV DRV SLOTS SLOTS VOLS WIPLIB01 VL 3494-L10 64 41 40 1133660 0 Y Y -- MEDIA SCRATCH SCRATCH SCRATCH TYPE COUNT THRESHOLD CATEGORY MEDIA2060 3002 -- OPERATIONAL STATE: AUTOMATED ERROR CATEGORY SCRATCH COUNT: 1 SCRATCH STACKED VOLUME COUNT: 43 PRIVATE STACKED VOLUME COUNT: 399 -- Library supports import/export. Convenience I/O station installed. Convenience I/O station in Import mode. Bulk input/output not configured. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html ** For information, services and offers, please visit our web site: http://www.klm.com. This e-mail and any attachment may contain confidential and privileged material intended for the addressee only. If you are not the addressee, you are notified that no part of the e-mail or any attachment may be disclosed, copied or distributed, and that any other action related to this e-mail or attachment is strictly prohibited, and may be unlawful. If you have received this e-mail by error, please notify the sender immediately by return e-mail, and delete this message. Koninklijke Luchtvaart Maatschappij NV (KLM), its subsidiaries and/or its employees shall not be liable for the incorrect or incomplete transmission of this e-mail or any attachments, nor responsible for any delay in receipt. Koninklijke Luchtvaart Maatschappij N.V. (also known as KLM Royal Dutch Airlines) is registered in Amstelveen, The Netherlands, with registered number 33014286 ** -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL
Re: VTS Scratch Count Issue
828 829 82A 82B 82C 82D 82E 82F BARRA CU 25-L 05/04 V 830 831 832 833 834 835 836 837 838 839 83A 83B 83C 83D 83E 83F 04 SU- Features Installed on Drive C(Wed Aug 01, 2007 12:42:59) --Current Code(ACTIVATED)--- 3494 Image 5.3, Rev. 5.39, for OS/2 Warp 4, a 5.37 update. IBM 3494 Library Manager Code Level 529.01 IBM 3494 Library Manager Code Level 529.10 Remote Library Manager Console Version 5.2 EC=F23225F IBM 3494 1 RTIC Expansion Attachment Version 1.00 Mirroring Hard Disk Drive Configuration. Feature 5220 PCI Ethernet Install (Intel) EC=H28116A --Alternate Code-(Unable to be ACTIVATED)--- IBM 3494 Library Manager Code Level 527.01 IBM 3494 Library Manager Code Level 527.21 LM--DUAL-AProcessor speed 1262 MHzMemory 511 MB Number of hard disk drives = 1 (MIRRORed disks) Hostname=lmA TCP/IP address=157.203.76.167 JAcky On 11/20/07, Vernooy, C.P. - SPLXM [EMAIL PROTECTED] wrote: It is difficult and dangerous to give an answer without knowing your configuration and VTS setup! Can't you find out who set up and controls the VTS, toghether with your tapemanagement system and other related subjects? Kees. Jacky Bright [EMAIL PROTECTED] wrote in message news:[EMAIL PROTECTED]... Hi , VTS is somewhat grey area for me. How can I add scratch volumes to VTS ? Someone told me there are 2-3 ways .. can anyone explain ? JAcky On 11/13/07, Weidt, James [EMAIL PROTECTED] wrote: Don't forget to verify that your tape management system has scratch records defined for the scratch volumes added to the vts. Thanks, Jim Weidt Senior Systems Engineer Jostens Inc. Office: 952-838-7555 Cell: 612-419-3738 [EMAIL PROTECTED] CONFIDENTIALITY NOTICE: The information contained in this e-mail communication and any attached documentation may be privileged, confidential or otherwise protected from disclosure and is intended only for the use of the designated recipient(s). It is not intended for transmission to, or receipt by, any unauthorized person. The use, distribution, transmittal or retransmittal by an unintended recipient of this communication is strictly prohibited. If you are not the intended recipient of this e-mail, please delete it from your system without copying it and notify the above sender. -Original Message- From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On Behalf Of Jacky Bright Sent: Tuesday, November 13, 2007 7:30 AM To: IBM-MAIN@BAMA.UA.EDU Subject: VTS Scratch Count Issue Hi, We are getting following message on console. Do I need to take action on this message ? Does anyone have an idea about this ? JAcky *CBR3660A Enter MEDIA2 scratch volumes into library WIPLIB01. Subsequently we have issued following command to check the status : D SMS,LIB(WIPLIB01),DETAIL F OAM,D,LIB,WIPLIB01,L=INTERNAL-Z CBR1110I OAM library status: 098 TAPE LIB DEVICETOT ONL AVL TOTAL EMPTY SCRTCH ON OP LIBRARY TYP TYPE DRV DRV DRV SLOTS SLOTS VOLS WIPLIB01 VL 3494-L10 64 41 40 1133660 0 Y Y -- MEDIA SCRATCH SCRATCH SCRATCH TYPE COUNT THRESHOLD CATEGORY MEDIA2060 3002 -- OPERATIONAL STATE: AUTOMATED ERROR CATEGORY SCRATCH COUNT: 1 SCRATCH STACKED VOLUME COUNT: 43 PRIVATE STACKED VOLUME COUNT: 399 -- Library supports import/export. Convenience I/O station installed. Convenience I/O station in Import mode. Bulk input/output not configured. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http
VTS Scratch Count Issue
Hi, We are getting following message on console. Do I need to take action on this message ? Does anyone have an idea about this ? JAcky *CBR3660A Enter MEDIA2 scratch volumes into library WIPLIB01. Subsequently we have issued following command to check the status : D SMS,LIB(WIPLIB01),DETAIL F OAM,D,LIB,WIPLIB01,L=INTERNAL-Z CBR1110I OAM library status: 098 TAPE LIB DEVICETOT ONL AVL TOTAL EMPTY SCRTCH ON OP LIBRARY TYP TYPE DRV DRV DRV SLOTS SLOTS VOLS WIPLIB01 VL 3494-L10 64 41 40 1133660 0 Y Y -- MEDIA SCRATCH SCRATCH SCRATCH TYPE COUNT THRESHOLD CATEGORY MEDIA2060 3002 -- OPERATIONAL STATE: AUTOMATED ERROR CATEGORY SCRATCH COUNT: 1 SCRATCH STACKED VOLUME COUNT: 43 PRIVATE STACKED VOLUME COUNT: 399 -- Library supports import/export. Convenience I/O station installed. Convenience I/O station in Import mode. Bulk input/output not configured. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: VTS Scratch Count Issue
I suppose so: you have 0 scratches in your VTS and the system is told to warn you when the number of scratches falls below the threshold of 60. You should add scratches to your VTS, unless you are sure you don't create new tapes. Kees. Jacky Bright [EMAIL PROTECTED] wrote in message news:[EMAIL PROTECTED]... Hi, We are getting following message on console. Do I need to take action on this message ? Does anyone have an idea about this ? JAcky *CBR3660A Enter MEDIA2 scratch volumes into library WIPLIB01. Subsequently we have issued following command to check the status : D SMS,LIB(WIPLIB01),DETAIL F OAM,D,LIB,WIPLIB01,L=INTERNAL-Z CBR1110I OAM library status: 098 TAPE LIB DEVICETOT ONL AVL TOTAL EMPTY SCRTCH ON OP LIBRARY TYP TYPE DRV DRV DRV SLOTS SLOTS VOLS WIPLIB01 VL 3494-L10 64 41 40 1133660 0 Y Y -- MEDIA SCRATCH SCRATCH SCRATCH TYPE COUNT THRESHOLD CATEGORY MEDIA2060 3002 -- OPERATIONAL STATE: AUTOMATED ERROR CATEGORY SCRATCH COUNT: 1 SCRATCH STACKED VOLUME COUNT: 43 PRIVATE STACKED VOLUME COUNT: 399 -- Library supports import/export. Convenience I/O station installed. Convenience I/O station in Import mode. Bulk input/output not configured. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html ** For information, services and offers, please visit our web site: http://www.klm.com. This e-mail and any attachment may contain confidential and privileged material intended for the addressee only. If you are not the addressee, you are notified that no part of the e-mail or any attachment may be disclosed, copied or distributed, and that any other action related to this e-mail or attachment is strictly prohibited, and may be unlawful. If you have received this e-mail by error, please notify the sender immediately by return e-mail, and delete this message. Koninklijke Luchtvaart Maatschappij NV (KLM), its subsidiaries and/or its employees shall not be liable for the incorrect or incomplete transmission of this e-mail or any attachments, nor responsible for any delay in receipt. Koninklijke Luchtvaart Maatschappij N.V. (also known as KLM Royal Dutch Airlines) is registered in Amstelveen, The Netherlands, with registered number 33014286 ** -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: VTS Scratch Count Issue
To avoid confusion: this all applies to virtual volumes in your VTS, not to real, stacking volumes, you still have 43 scratches of those. Kees. -Original Message- From: Vernooy, C.P. - SPLXM Sent: dinsdag 13 november 2007 14:34 To: 'IBM-MAIN@BAMA.UA.EDU' Subject: Re: VTS Scratch Count Issue I suppose so: you have 0 scratches in your VTS and the system is told to warn you when the number of scratches falls below the threshold of 60. You should add scratches to your VTS, unless you are sure you don't create new tapes. Kees. Jacky Bright [EMAIL PROTECTED] wrote in message news:[EMAIL PROTECTED]... Hi, We are getting following message on console. Do I need to take action on this message ? Does anyone have an idea about this ? JAcky *CBR3660A Enter MEDIA2 scratch volumes into library WIPLIB01. Subsequently we have issued following command to check the status : D SMS,LIB(WIPLIB01),DETAIL F OAM,D,LIB,WIPLIB01,L=INTERNAL-Z CBR1110I OAM library status: 098 TAPE LIB DEVICETOT ONL AVL TOTAL EMPTY SCRTCH ON OP LIBRARY TYP TYPE DRV DRV DRV SLOTS SLOTS VOLS WIPLIB01 VL 3494-L10 64 41 40 1133660 0 Y Y -- MEDIA SCRATCH SCRATCH SCRATCH TYPE COUNT THRESHOLD CATEGORY MEDIA2060 3002 -- OPERATIONAL STATE: AUTOMATED ERROR CATEGORY SCRATCH COUNT: 1 SCRATCH STACKED VOLUME COUNT: 43 PRIVATE STACKED VOLUME COUNT: 399 -- Library supports import/export. Convenience I/O station installed. Convenience I/O station in Import mode. Bulk input/output not configured. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html ** For information, services and offers, please visit our web site: http://www.klm.com. This e-mail and any attachment may contain confidential and privileged material intended for the addressee only. If you are not the addressee, you are notified that no part of the e-mail or any attachment may be disclosed, copied or distributed, and that any other action related to this e-mail or attachment is strictly prohibited, and may be unlawful. If you have received this e-mail by error, please notify the sender immediately by return e-mail, and delete this message. Koninklijke Luchtvaart Maatschappij NV (KLM), its subsidiaries and/or its employees shall not be liable for the incorrect or incomplete transmission of this e-mail or any attachments, nor responsible for any delay in receipt. Koninklijke Luchtvaart Maatschappij N.V. (also known as KLM Royal Dutch Airlines) is registered in Amstelveen, The Netherlands, with registered number 33014286 ** -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: VTS Scratch Count Issue
Kees, What would one save by not having as many virtual volumes than you can handle in your Silo, in this case 1133? Regards Herbie -Original Message- From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On Behalf Of Vernooy, C.P. - SPLXM Sent: 13 November 2007 01:36 nm To: IBM-MAIN@BAMA.UA.EDU Subject: Re: VTS Scratch Count Issue To avoid confusion: this all applies to virtual volumes in your VTS, not to real, stacking volumes, you still have 43 scratches of those. Kees. -Original Message- From: Vernooy, C.P. - SPLXM Sent: dinsdag 13 november 2007 14:34 To: 'IBM-MAIN@BAMA.UA.EDU' Subject: Re: VTS Scratch Count Issue I suppose so: you have 0 scratches in your VTS and the system is told to warn you when the number of scratches falls below the threshold of 60. You should add scratches to your VTS, unless you are sure you don't create new tapes. Kees. Elavon Financial Services Limited Registered in Ireland: Number 418442 Registered Office: Block E, 1st Floor, Cherrywood Business Park, Loughlinstown, Co. Dublin, Ireland Directors: Robert Abele (USA), John Collins, Terrance Dolan (USA), Pamela Joseph (USA), Declan Lynch, John McNally, Malcolm Towlson Elavon Financial Services Limited, trading as Elavon, is regulated by the Financial Regulator -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: VTS Scratch Count Issue
Herbie, be careful: the 1133 refers to the slots for physical tapevolumes in the silo. Why not the max? Because they cost money. Kees. Van Dalsen, Herbie [EMAIL PROTECTED] wrote in message news:[EMAIL PROTECTED] ... Kees, What would one save by not having as many virtual volumes than you can handle in your Silo, in this case 1133? Regards Herbie -Original Message- From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On Behalf Of Vernooy, C.P. - SPLXM Sent: 13 November 2007 01:36 nm To: IBM-MAIN@BAMA.UA.EDU Subject: Re: VTS Scratch Count Issue To avoid confusion: this all applies to virtual volumes in your VTS, not to real, stacking volumes, you still have 43 scratches of those. Kees. -Original Message- From: Vernooy, C.P. - SPLXM Sent: dinsdag 13 november 2007 14:34 To: 'IBM-MAIN@BAMA.UA.EDU' Subject: Re: VTS Scratch Count Issue I suppose so: you have 0 scratches in your VTS and the system is told to warn you when the number of scratches falls below the threshold of 60. You should add scratches to your VTS, unless you are sure you don't create new tapes. Kees. Elavon Financial Services Limited Registered in Ireland: Number 418442 Registered Office: Block E, 1st Floor, Cherrywood Business Park, Loughlinstown, Co. Dublin, Ireland Directors: Robert Abele (USA), John Collins, Terrance Dolan (USA), Pamela Joseph (USA), Declan Lynch, John McNally, Malcolm Towlson Elavon Financial Services Limited, trading as Elavon, is regulated by the Financial Regulator -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html ** For information, services and offers, please visit our web site: http://www.klm.com. This e-mail and any attachment may contain confidential and privileged material intended for the addressee only. If you are not the addressee, you are notified that no part of the e-mail or any attachment may be disclosed, copied or distributed, and that any other action related to this e-mail or attachment is strictly prohibited, and may be unlawful. If you have received this e-mail by error, please notify the sender immediately by return e-mail, and delete this message. Koninklijke Luchtvaart Maatschappij NV (KLM), its subsidiaries and/or its employees shall not be liable for the incorrect or incomplete transmission of this e-mail or any attachments, nor responsible for any delay in receipt. Koninklijke Luchtvaart Maatschappij N.V. (also known as KLM Royal Dutch Airlines) is registered in Amstelveen, The Netherlands, with registered number 33014286 ** -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html
Re: VTS Scratch Count Issue
Don't forget to verify that your tape management system has scratch records defined for the scratch volumes added to the vts. Thanks, Jim Weidt Senior Systems Engineer Jostens Inc. Office: 952-838-7555 Cell: 612-419-3738 [EMAIL PROTECTED] CONFIDENTIALITY NOTICE: The information contained in this e-mail communication and any attached documentation may be privileged, confidential or otherwise protected from disclosure and is intended only for the use of the designated recipient(s). It is not intended for transmission to, or receipt by, any unauthorized person. The use, distribution, transmittal or retransmittal by an unintended recipient of this communication is strictly prohibited. If you are not the intended recipient of this e-mail, please delete it from your system without copying it and notify the above sender. -Original Message- From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On Behalf Of Jacky Bright Sent: Tuesday, November 13, 2007 7:30 AM To: IBM-MAIN@BAMA.UA.EDU Subject: VTS Scratch Count Issue Hi, We are getting following message on console. Do I need to take action on this message ? Does anyone have an idea about this ? JAcky *CBR3660A Enter MEDIA2 scratch volumes into library WIPLIB01. Subsequently we have issued following command to check the status : D SMS,LIB(WIPLIB01),DETAIL F OAM,D,LIB,WIPLIB01,L=INTERNAL-Z CBR1110I OAM library status: 098 TAPE LIB DEVICETOT ONL AVL TOTAL EMPTY SCRTCH ON OP LIBRARY TYP TYPE DRV DRV DRV SLOTS SLOTS VOLS WIPLIB01 VL 3494-L10 64 41 40 1133660 0 Y Y -- MEDIA SCRATCH SCRATCH SCRATCH TYPE COUNT THRESHOLD CATEGORY MEDIA2060 3002 -- OPERATIONAL STATE: AUTOMATED ERROR CATEGORY SCRATCH COUNT: 1 SCRATCH STACKED VOLUME COUNT: 43 PRIVATE STACKED VOLUME COUNT: 399 -- Library supports import/export. Convenience I/O station installed. Convenience I/O station in Import mode. Bulk input/output not configured. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html