SMC-D connectivity between a z/OS LPAR and a z/VM guest running Linux?

[Ed Jaffe]

Has anyone enabled SMC-D connectivity between a z/OS LPAR and a z/VM 
guest running Linux?


--
Phoenix Software International
Edward E. Jaffe
831 Parkview Drive North
El Segundo, CA 90245
https://www.phoenixsoftware.com/



This e-mail message, including any attachments, appended messages and the
information contained therein, is for the sole use of the intended
recipient(s). If you are not an intended recipient or have otherwise
received this email message in error, any use, dissemination, distribution,
review, storage or copying of this e-mail message and the information
contained therein is strictly prohibited. If you are not an intended
recipient, please contact the sender by reply e-mail and destroy all copies
of this email message and do not otherwise utilize or retain this email
message or any or all of the information contained therein. Although this
email message and any attachments or appended messages are believed to be
free of any virus or other defect that might affect any computer system into
which it is received and opened, it is the responsibility of the recipient
to ensure that it is virus free and no responsibility is accepted by the
sender for any loss or damage arising in any way from its opening or use.

--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN

Re: How debug convoluted #ifdef logic/how get __opendir2() defined

[Jantje.]

SKIPSRC(HIDE) compile option will hide any code that is excluded as a result of 
the #ifdef logic. From there, you will have to try the different candidate 
#define and run a compile after each modification of those. Yes, there will be 
a cominatorial explosion.

Sorry, I can't think of any better solution.

Cheers,

Jantje.

--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN

Re: IMS Upgrade from IMS v13 to v15.1

[David Purdy]

Stating the obvious - I reserved a pair of IMS SVCs for new and current IMS 
SVCs, and flip-flop for the next upgrade.Of course, this works if you only have 
two IMS versions.

David

-Original Message-
From: Jasi G 
To: IBM-MAIN@LISTSERV.UA.EDU
Sent: Sun, Dec 6, 2020 9:46 pm
Subject: IMS Upgrade from IMS v13 to v15.1

Hi, 

I am planning to upgrade IMS v13 to v15.1 and I have done the following and 
needs to verify from the experts, if I am missing anything else:
- Complete SYSGEN 
- SVC Install/Enabled - Verified/Works
- Update DFSBPxx member
- Recon Upgrade
- ACBGEN
- Update MODBLKS

Shutdown Old IMS v13.0 and bring up IMS v15.1 with the above changes and 
libraries and start with Cold Start? 
I have installed all Maintenance to IMS v13.0 and IMS v15.1 if I need to fall 
back.
Any advise or suggestions would be appreciated.

Thank You in advance,
Regards,
Jasi.

--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN

--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN

Re: DFRMM tape movement JCL

[Lizette Koehler]

Did you look in ISMF Option G Reports?

I think there are some in there

Lizette


-Original Message-
From: IBM Mainframe Discussion List  On Behalf Of 
Jake Anderson
Sent: Monday, December 7, 2020 3:42 AM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: DFRMM tape movement JCL

Hello

Are there anyone who is still using offsite tapes (Vaults). Is there any 
specific JCLs are there to list the tapes in drive, list the tapes in vaults 
and movement inventory records to record movement of Tapes.

I did look into SYS1.SAMPLIB and ran some some report but still it gives me a 
wrong report about zero tapes in vault whereas we have 24 tapes in vault.

Could someone please point me in the right direction

zOS 2.2

Jake

--
For IBM-MAIN subscribe / signoff / archive access instructions, send email to 
lists...@listserv.ua.edu with the message: INFO IBM-MAIN

--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN

Re: Getting Enhanced HOLDDATA from IBM

[Kurt Quackenbush]

On 12/4/2020 2:25 PM, Richards, Robert B. , CTR wrote:


I changed dispby-112 to service and it worked flawlessly. What changed about 
dispby-112.boulder.ibm.com to have caused my error?


I don't even know what dispby-112.boulder.ibm.com is.  Where did you get 
that server host name?  ftp://service.boulder.ibm.com is the correct 
server to manually download the /s390/holddata/full.txt file.  But as 
already mentioned, you should check out SMP/E RECEIVE ORDER instead to 
get both HOLDDATA and PTFs.


Kurt Quackenbush -- IBM, SMP/E Development
Chuck Norris never uses CHECK when he applies PTFs.

--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN

Re: Edit the OSA/ICC definitions using the HMC

[Edgington, Jerry]

Gord,

Did you try going into Single Object Operations, to go to the CEC, instead of 
the HMC?   I have seen this issue before, but I don't remember how it was 
resolved. It might have been upgrades to the HMC. We have a zBC12, and the HMC 
is running v2.14.1.  Not sure if this helps or not.

Thanks,
Jerry 

-Original Message-
From: IBM Mainframe Discussion List  On Behalf Of 
Gord Neill
Sent: Friday, December 4, 2020 12:51 PM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Edit the OSA/ICC definitions using the HMC

This message was sent from an external source outside of Western & Southern's 
network. Do not click links or open attachments unless you recognize the sender 
and know the contents are safe.


Hi,
I'm trying to edit the the OSA-ICC configuration on the HMC for a zBC12, and I 
can get to the panel for Import / Export / Edit / Validate, but when I select 
Edit Source file, the same panel expands a little bit, but there is no other 
panel that opens up to show the source file.  When select Cancel, essential 
nothing happens - I select Cancel many, many, many times, and eventually I get 
back to the panel that allows for Manual Configuration Options.

In the HMC guide it says that SSLv3 and RC4 must be enabled, and they are.  
I've allowed Pop-Ups from Firefox  (and Chrome and IE, still didn't work), 
enabled as much as I could see in the current version of Java, still no change. 
 I'm using Remote Access to the HMC if that has any bearing on things.

These are the steps I was following:
1. Log on to the HMC, select the CPC, and open the OSA Advanced Facility.
2. Select the OSC CHPID to export the OSA-ICC configuration file.
3. Select Card specific advanced facilities.
4. Select Manual configuration options and click OK 5. The Manual Configuration 
Options window opens, and I select Edit Source File

I asked one of my customers to try to do the Edit Source File on their zBC12, 
same results - they were not able to edit the configuration, as no edit window 
appears.  They were also working with a Remote connection to the HMC.

Any suggestions muchly appreciated!


--
Gord Neill | Senior I/T Consultant | GlassHouse Systems
Tel: +1 (416) 229-2950 x306 | Mobile: +1 (416) 347-8454





[https://secureimages.mcafee.com/common/affiliateImages/mfe/logo.png]
  Scanned by 
McAfee
 and confirmed virus-free.

--
For IBM-MAIN subscribe / signoff / archive access instructions, send email to 
lists...@listserv.ua.edu with the message: INFO IBM-MAIN

--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN

DFRMM tape movement JCL

[Jake Anderson]

Hello

Are there anyone who is still using offsite tapes (Vaults). Is there any
specific JCLs are there to list the tapes in drive, list the tapes in
vaults and movement inventory records to record movement of Tapes.

I did look into SYS1.SAMPLIB and ran some some report but still it gives me
a wrong report about zero tapes in vault whereas we have 24 tapes in vault.

Could someone please point me in the right direction

zOS 2.2

Jake

--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN