Re: Problem when transfereing PDS members using ftp.
I looked there, made the change to CEEPRM00, but on at least one LPAR, it didn't work. This LPAR already had a value in the ENVAR parameter. Before the change it said: ENVAR("GSK_PROTOCOL_TLSV1_2=ON") And now it says: ENVAR("GSK_PROTOCOL_TLSV1_2=ON,TZ=IST-2IDT") Does this look OK. When I activate it using the SET CEE=00, it works, and I see the updated value when I issue the D CEE command. I also restarted the FTP server tasks. Gadi -Original Message- From: IBM Mainframe Discussion List On Behalf Of Luc Martens (KBC) Sent: יום ה 18 יולי 2024 09:23 To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: Problem when transfereing PDS members using ftp. Please have a look at: https://www.ibm.com/support/pages/time-tags-incorrect-ftp-generated-ispf-statistics -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: Problem when transfereing PDS members using ftp.
Hi Kolusu, Thank you very much Gadi -Original Message- From: IBM Mainframe Discussion List On Behalf Of Sri Hari Kolusu Sent: יום ד 17 יולי 2024 12:41 To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: Problem when transfereing PDS members using ftp. > When he looked at the destination he say that the last update time was 3 > hours less than it should have been. Gadi, Check this https://www.ibm.com/support/pages/time-tags-incorrect-ftp-generated-ispf-statistics Thanks, Kolusu DFSORT Development IBM Corporation -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Problem when transfereing PDS members using ftp.
Hi, Yesterday, a colleague transferred a few PDS members from one LPAR to another using ftp. When he looked at the destination he say that the last update time was 3 hours less than it should have been. I checked all of the time related parameters I could think of including the TIMEZONE value in CLOCKxx, and the TZ environment value in USS. The date command in USS shows the correct time. It looks like ftp is setting the time to UTC without regard to the TIMEZONE settings in the system. We are currently using UTC+3 time. This happens in z/OS v2.4, v2.5, and v3.1. Does anyone have a solution for this? Gadi -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: message IEA793A
We stopped using pre allocated dump datasets a long time ago. We have these commands in SYS1.PARMLIB DD ADD,SMS=(STOR=WORK) - Allocate dump Datasets on a storage class named work DD NAME=SYS1.'- Defines the name of the dump datasets DD ALLOC=ACTIVE' - Activates it CD SET,SDUMP,MAXSPACE=2000M - Increase the size of the dump to 2GB Dump datasets are allocated as needed. You just have to delete them once in a while. Gadi -Original Message- From: IBM Mainframe Discussion List On Behalf Of Joseph Reichman Sent: יום ג 09 יולי 2024 15:32 To: IBM-MAIN@LISTSERV.UA.EDU Subject: message IEA793A Hi I am trying to figure out how to deal with this message *01 IEA793A NO DUMP DATA SETS AVAILABLE FOR DUMPID=001 (IOSAS ). USE THE DUMPDS COMMAND OR REPLY D TO DELETE THE DUMP I tried DD CLEAR,DSN=01 And get the following response SYS1.DUMP DASD DATA SETS NOT CLEARED: NOT DEFINED TO SDUMP: 01 -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: Compression in z15-t02
thanks -Original Message- From: IBM Mainframe Discussion List On Behalf Of Timothy Sipples Sent: יום ג 02 יולי 2024 11:57 To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: Compression in z15-t02 Scott?s memory is faulty. :-) Take a look at IBM?s landing page for the IBM Integrated Accelerator for zEnterprise Data Compression (zEDC): https://www.ibm.com/support/z-content-solutions/compression/ In the ?How to get started? section you can click/tap on the various tabs to review popular features/software components that can exploit zEDC. These tabs are not exhaustive, but they cover the most popular exploiters. If you need to enable the priced optional zEDC feature for z/OS then that?ll be indicated on the respective tab. Software such as IBM Semeru (java.util.zip) that uses the zlib API does NOT require the priced optional zEDC feature. On those tabs you won?t see the ?Enabling the zEDC feature...? link. As far as the CPU-related implications, zEDC?s core principle (pun intended) is to improve processing efficiency and throughput. I think you?re going to appreciate the results. The IBM Z Batch Network Analyzer (zBNA) includes some functionality to estimate how much benefit you can get from zEDC for your existing workloads. ? Timothy Sipples Senior Architect Digital Assets, Industry Solutions, and Cybersecurity IBM Z/LinuxONE, Asia-Pacific sipp...@sg.ibm.com -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: Compression in z15-t02
Thanks Scott -Original Message- From: IBM Mainframe Discussion List On Behalf Of Scott Chapman Sent: יום ב 01 יולי 2024 14:51 To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: Compression in z15-t02 Further clarification from my memory banks: That priced feature is required for the common use cases by the operating system, such as HSM. Those use cases use a method of calling the compression that works via the SAPs to manage calling the hardware instructions. But the underlying hardware instructions can be called directly without using that interface and involving the SAPs. This method likely will use more GP CPU time than the method that requires the priced feature. So if you're writing your own software, at least in theory, you could call the hardware instructions directly. I don't know if any ISV software has done that. Something in my memory says that the Java compression routines call the instructions directly, but I'm not sure about that. Thinking about it, that doesn't align with my memory that those Java routines could utilize zEDC even back when it was a physical card and so had to go through the priced feature interface. But it's also possible that later Java releases changed the methodology of utilizing zEDC. Or it's possible my memory, not being RAIM-protected, has failed in one or more ways. Scott On Sun, 30 Jun 2024 14:47:14 +, Mark Jacobs wrote: >Note that it's a priced feature. > >Mark Jacobs > >Sent from ProtonMail, Swiss-based encrypted email. > >GPG Public Key - >https://api.protonmail.ch/pks/lookup?op=get=markjacobs@protonmai >l.com > > >On Sunday, June 30th, 2024 at 10:17 AM, Ed Jaffe ><05acc3c79bf7-dmarc-requ...@listserv.ua.edu> wrote: > >> On 6/30/2024 5:07 AM, גדי בן אבי wrote: >> >> > Hi, >> > Do I need any software besides base z/OS v2.5 to support compression using >> > to compression accelerator? >> > >> > Gadi >> >> | PRODUCT OWNER('IBM CORP') >> | NAME('Z/OS') >> | FEATURENAME('ZEDC') >> | ID(5650-ZOS) >> | VERSION() >> | RELEASE() >> | MOD(*) >> | STATE(ENABLED) >> >> -- >> Phoenix Software International >> Edward E. Jaffe >> 831 Parkview Drive North >> El Segundo, CA 90245 >> https://www.phoenixsoftware.com/ >> >> >> - >> --- This e-mail message, including any attachments, appended >> messages and the information contained therein, is for the sole use >> of the intended recipient(s). If you are not an intended recipient or >> have otherwise received this email message in error, any use, >> dissemination, distribution, review, storage or copying of this >> e-mail message and the information contained therein is strictly >> prohibited. If you are not an intended recipient, please contact the >> sender by reply e-mail and destroy all copies of this email message >> and do not otherwise utilize or retain this email message or any or >> all of the information contained therein. Although this email message >> and any attachments or appended messages are believed to be free of >> any virus or other defect that might affect any computer system into >> which it is received and opened, it is the responsibility of the >> recipient to ensure that it is virus free and no responsibility is >> accepted by the sender for any loss or damage arising in any way from its >> opening or use. >> >> - >> - For IBM-MAIN subscribe / signoff / archive access instructions, >> send email to lists...@listserv.ua.edu with the message: INFO >> IBM-MAIN > >-- >For IBM-MAIN subscribe / signoff / archive access instructions, send >email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Compression in z15-t02
Hi, Do I need any software besides base z/OS v2.5 to support compression using to compression accelerator? Gadi -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: TSO PARMLIB command - Abend S047
Hi Michael and everyone else who tried to help. I'm not sure why, but an IPL solved the problem. Gadi -Original Message- From: IBM Mainframe Discussion List On Behalf Of Michael Babcock Sent: יום ד 19 יוני 2024 15:05 To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: TSO PARMLIB command - Abend S047 Have you issued TSO ISRFIND, then put in PARMLIB in the member name and Y in the load module field and hit enter to ensure it’s finding PARMLIB in the CMDLIB you think it’s coming from? On Tue, Jun 18, 2024 at 11:21 PM גדי בן אבי wrote: > SYS1.CMDLIB is explicitly defined in the APF list. > > -Original Message- > From: IBM Mainframe Discussion List On > Behalf Of Allan Staller > Sent: יום ג 18 יוני 2024 15:41 > To: IBM-MAIN@LISTSERV.UA.EDU > Subject: Re: TSO PARMLIB command - Abend S047 > > Classification: Confidential > > Lnklst option lnkauth=apftab? > > -Original Message- > From: IBM Mainframe Discussion List On > Behalf Of ??? ?? ??? > Sent: Tuesday, June 18, 2024 1:53 AM > To: IBM-MAIN@LISTSERV.UA.EDU > Subject: TSO PARMLIB command - Abend S047 > > [CAUTION: This Email is from outside the Organization. Unless you > trust the sender, Don't click links or open attachments as it may be a > Phishing email, which can steal your Information and compromise your > Computer.] > > Hi, > In a new installation if z/OS v3.1, I am trying to use the TSO PARMLIB > command. > I keep getting Abend S047. > > The PARMLIB command is in SYS1.CMDLIB. I made sure that the library is > in the APF list. > > What else should I look at? > > Thanks > > Gadi > > > -- > For IBM-MAIN subscribe / signoff / archive access instructions, send > email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN > ::DISCLAIMER:: > > The contents of this e-mail and any attachment(s) are confidential and > intended for the named recipient(s) only. E-mail transmission is not > guaranteed to be secure or error-free as information could be > intercepted, corrupted, lost, destroyed, arrive late or incomplete, or > may contain viruses in transmission. The e mail and its contents (with > or without referred errors) shall therefore not attach any liability > on the originator or HCL or its affiliates. Views or opinions, if any, > presented in this email are solely those of the author and may not > necessarily reflect the views or opinions of HCL or its affiliates. > Any form of reproduction, dissemination, copying, disclosure, > modification, distribution and / or publication of this message > without the prior written consent of authorized representative of HCL > is strictly prohibited. If you have received this email in error > please delete it and notify the sender immediately. Before opening any > email and/or attachments, please check them for viruses and other defects. > > > -- > For IBM-MAIN subscribe / signoff / archive access instructions, send > email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN > > -- > For IBM-MAIN subscribe / signoff / archive access instructions, send > email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN > -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: TSO PARMLIB command - Abend S047
SYS1.CMDLIB is explicitly defined in the APF list. -Original Message- From: IBM Mainframe Discussion List On Behalf Of Allan Staller Sent: יום ג 18 יוני 2024 15:41 To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: TSO PARMLIB command - Abend S047 Classification: Confidential Lnklst option lnkauth=apftab? -Original Message- From: IBM Mainframe Discussion List On Behalf Of ??? ?? ??? Sent: Tuesday, June 18, 2024 1:53 AM To: IBM-MAIN@LISTSERV.UA.EDU Subject: TSO PARMLIB command - Abend S047 [CAUTION: This Email is from outside the Organization. Unless you trust the sender, Don't click links or open attachments as it may be a Phishing email, which can steal your Information and compromise your Computer.] Hi, In a new installation if z/OS v3.1, I am trying to use the TSO PARMLIB command. I keep getting Abend S047. The PARMLIB command is in SYS1.CMDLIB. I made sure that the library is in the APF list. What else should I look at? Thanks Gadi -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN ::DISCLAIMER:: The contents of this e-mail and any attachment(s) are confidential and intended for the named recipient(s) only. E-mail transmission is not guaranteed to be secure or error-free as information could be intercepted, corrupted, lost, destroyed, arrive late or incomplete, or may contain viruses in transmission. The e mail and its contents (with or without referred errors) shall therefore not attach any liability on the originator or HCL or its affiliates. Views or opinions, if any, presented in this email are solely those of the author and may not necessarily reflect the views or opinions of HCL or its affiliates. Any form of reproduction, dissemination, copying, disclosure, modification, distribution and / or publication of this message without the prior written consent of authorized representative of HCL is strictly prohibited. If you have received this email in error please delete it and notify the sender immediately. Before opening any email and/or attachments, please check them for viruses and other defects. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: TSO PARMLIB command - Abend S047
It says LNKAUTH=LNKLST in IEASYS. SYS1.CMDLIB is explicitly authorized, with the correct volser. Gadi -Original Message- From: IBM Mainframe Discussion List On Behalf Of David Spiegel Sent: יום ג 18 יוני 2024 14:10 To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: TSO PARMLIB command - Abend S047 Hi Gadi, What is the value of LNKAUTH in IEASYSxx? If it is APFTAB, is SYS1.CMDLIB coded explicitly (with its proper VOLSER) in PROGxx? Regards, David On 2024-06-18 02:53, גדי בן אבי wrote: > Hi, > In a new installation if z/OS v3.1, I am trying to use the TSO PARMLIB > command. > I keep getting Abend S047. > > The PARMLIB command is in SYS1.CMDLIB. I made sure that the library is in the > APF list. > > What else should I look at? > > Thanks > > Gadi > > > -- > For IBM-MAIN subscribe / signoff / archive access instructions, send > email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: TSO PARMLIB command - Abend S047
SYS1.CMDLIB is authorized. I checked using D PROG,APF and the APF command in SDSF. I issue TSO PARMLIB under ISPF. Gadi -Original Message- From: IBM Mainframe Discussion List On Behalf Of Seymour J Metz Sent: יום ג 18 יוני 2024 13:59 To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: TSO PARMLIB command - Abend S047 Is SYS1.CMDLIB authorized? Are you issuing PARMLIB from the READY prompt o from ISPF? -- Shmuel (Seymour J.) Metz http://mason.gmu.edu/~smetz3 עַם יִשְׂרָאֵל חַי נֵ֣צַח יִשְׂרָאֵ֔ל לֹ֥א יְשַׁקֵּ֖ר From: IBM Mainframe Discussion List on behalf of גדי בן אבי Sent: Tuesday, June 18, 2024 6:55 AM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: TSO PARMLIB command - Abend S047 According to ISRDDN it is the only library in the Link List with a member named PARMLIB. -Original Message- From: IBM Mainframe Discussion List On Behalf Of Seymour J Metz Sent: יום ג 18 יוני 2024 13:51 To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: TSO PARMLIB command - Abend S047 Is CMDLIB the first in the link list to have a member or alias named PARMLIB? -- Shmuel (Seymour J.) Metz http://mason.gmu.edu/~smetz3 עַם יִשְׂרָאֵל חַי נֵ֣צַח יִשְׂרָאֵ֔ל לֹ֥א יְשַׁקֵּ֖ר From: IBM Mainframe Discussion List on behalf of גדי בן אבי Sent: Tuesday, June 18, 2024 6:29 AM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: TSO PARMLIB command - Abend S047 The TSO procedure does not have a STEPLIB. Everything comes from the Link List. I checked the APF status of SYS1.CMDLIB using the PAF command in SDSF, and it says it's OK. -Original Message- From: IBM Mainframe Discussion List On Behalf Of Colin Paice Sent: יום ג 18 יוני 2024 12:58 To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: TSO PARMLIB command - Abend S047 If any data set in the concatenation is not APF authorised you will get S047. You can use D prog operator command to check status of APF datasets On Tue, 18 Jun 2024 at 07:54, גדי בן אבי wrote: > Hi, > In a new installation if z/OS v3.1, I am trying to use the TSO PARMLIB > command. > I keep getting Abend S047. > > The PARMLIB command is in SYS1.CMDLIB. I made sure that the library is > in the APF list. > > What else should I look at? > > Thanks > > Gadi > > > -- > For IBM-MAIN subscribe / signoff / archive access instructions, send > email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN > -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: TSO PARMLIB command - Abend S047
According to ISRDDN it is the only library in the Link List with a member named PARMLIB. -Original Message- From: IBM Mainframe Discussion List On Behalf Of Seymour J Metz Sent: יום ג 18 יוני 2024 13:51 To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: TSO PARMLIB command - Abend S047 Is CMDLIB the first in the link list to have a member or alias named PARMLIB? -- Shmuel (Seymour J.) Metz http://mason.gmu.edu/~smetz3 עַם יִשְׂרָאֵל חַי נֵ֣צַח יִשְׂרָאֵ֔ל לֹ֥א יְשַׁקֵּ֖ר From: IBM Mainframe Discussion List on behalf of גדי בן אבי Sent: Tuesday, June 18, 2024 6:29 AM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: TSO PARMLIB command - Abend S047 The TSO procedure does not have a STEPLIB. Everything comes from the Link List. I checked the APF status of SYS1.CMDLIB using the PAF command in SDSF, and it says it's OK. -Original Message- From: IBM Mainframe Discussion List On Behalf Of Colin Paice Sent: יום ג 18 יוני 2024 12:58 To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: TSO PARMLIB command - Abend S047 If any data set in the concatenation is not APF authorised you will get S047. You can use D prog operator command to check status of APF datasets On Tue, 18 Jun 2024 at 07:54, גדי בן אבי wrote: > Hi, > In a new installation if z/OS v3.1, I am trying to use the TSO PARMLIB > command. > I keep getting Abend S047. > > The PARMLIB command is in SYS1.CMDLIB. I made sure that the library is > in the APF list. > > What else should I look at? > > Thanks > > Gadi > > > -- > For IBM-MAIN subscribe / signoff / archive access instructions, send > email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN > -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: TSO PARMLIB command - Abend S047
The TSO procedure does not have a STEPLIB. Everything comes from the Link List. I checked the APF status of SYS1.CMDLIB using the PAF command in SDSF, and it says it's OK. -Original Message- From: IBM Mainframe Discussion List On Behalf Of Colin Paice Sent: יום ג 18 יוני 2024 12:58 To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: TSO PARMLIB command - Abend S047 If any data set in the concatenation is not APF authorised you will get S047. You can use D prog operator command to check status of APF datasets On Tue, 18 Jun 2024 at 07:54, גדי בן אבי wrote: > Hi, > In a new installation if z/OS v3.1, I am trying to use the TSO PARMLIB > command. > I keep getting Abend S047. > > The PARMLIB command is in SYS1.CMDLIB. I made sure that the library is > in the APF list. > > What else should I look at? > > Thanks > > Gadi > > > -- > For IBM-MAIN subscribe / signoff / archive access instructions, send > email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN > -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: TSO PARMLIB command - Abend S047
The PARMLIB command only appears in AUTHCMD. This is the same as in our older systems running z/OS v2.4 and v2.5, where everything works. Gadi -Original Message- From: IBM Mainframe Discussion List On Behalf Of Attila Fogarasi Sent: יום ג 18 יוני 2024 11:49 To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: TSO PARMLIB command - Abend S047 look at AUTHCMD and AUTHPGM. in PARMLIB(IKJTSOxx) On Tue, Jun 18, 2024 at 4:54 PM גדי בן אבי wrote: > Hi, > In a new installation if z/OS v3.1, I am trying to use the TSO PARMLIB > command. > I keep getting Abend S047. > > The PARMLIB command is in SYS1.CMDLIB. I made sure that the library is > in the APF list. > > What else should I look at? > > Thanks > > Gadi > > > -- > For IBM-MAIN subscribe / signoff / archive access instructions, send > email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN > -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
TSO PARMLIB command - Abend S047
Hi, In a new installation if z/OS v3.1, I am trying to use the TSO PARMLIB command. I keep getting Abend S047. The PARMLIB command is in SYS1.CMDLIB. I made sure that the library is in the APF list. What else should I look at? Thanks Gadi -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: PASSPORT 3270 emulator (PC) problem w transferring files
MY Best advice would be to use ftp or some other file transfer program (Connect:Direct, XCOM or others) that works over TCP/IP. Using the 3270 protocol that was meant for displaying screens to transfer files was never very fast. -Original Message- From: IBM Mainframe Discussion List On Behalf Of Sent: יום ד 10 אפריל 2024 11:07 To: IBM-MAIN@LISTSERV.UA.EDU Subject: PASSPORT 3270 emulator (PC) problem w transferring files I'have recenctly returned to the job life after I retired in 2016. As I'm working remote I'm using the PASSPORT 3270 emulator program. But the file transfers (IND$FILE) is VERY/EXTREMELY slow from PC to MF. My internet connection or my local network should not be the problem. Have a 500Mb/500Mb connection and my network have no problem with anything else. The connection is going through a VPN software (Check Point Mobile Version VPN E86.20) that seems to work as intended, e g no error or warning messages. Otherwise Windows 10 at a laptop provided by my client (a large bank in Sweden). The speed for e g 7MB is about 2.5 hours. Any suggestions to speed it up? -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: Program to split a jobs output
Thanks Rob, That is exactly what I was looking for. Gadi -Original Message- From: IBM Mainframe Discussion List On Behalf Of Rob Scott Sent: יום ג 09 אפריל 2024 12:15 To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: Program to split a jobs output I believe that Lionel Dyck has a simple SDSF REXX exec that does pretty much what you require - it is called "SDSFXDD". It takes each SYSOUT dataset from a job and saves it as a member of a PDS. Rob Scott Rocket Software -Original Message- From: IBM Mainframe Discussion List On Behalf Of ??? ?? ??? Sent: Tuesday, April 9, 2024 9:43 AM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Program to split a jobs output EXTERNAL EMAIL Hi, Today I had to sent a jobs output to IBM to help determine a problem. The jobs had 11 sysout datasets, and I wanted to send each one individually. Does anyone know of a program to do this automagically, before I see how complicated it would be to write one? Gadi -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN Rocket Software, Inc. and subsidiaries ■ 77 Fourth Avenue, Waltham MA 02451 ■ Main Office Toll Free Number: +1 855.577.4323 Contact Customer Support: https://my.rocketsoftware.com/RocketCommunity/RCEmailSupport Unsubscribe from Marketing Messages/Manage Your Subscription Preferences - http://www.rocketsoftware.com/manage-your-email-preferences Privacy Policy - http://www.rocketsoftware.com/company/legal/privacy-policy This communication and any attachments may contain confidential information of Rocket Software, Inc. All unauthorized use, disclosure or distribution is prohibited. If you are not the intended recipient, please notify Rocket Software immediately and destroy all copies of this communication. Thank you. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Program to split a jobs output
Hi, Today I had to sent a jobs output to IBM to help determine a problem. The jobs had 11 sysout datasets, and I wanted to send each one individually. Does anyone know of a program to do this automagically, before I see how complicated it would be to write one? Gadi -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
SDSF issue.
Hi, In previous versions, when I wrote Q in the QUIECE field on the DA panel, SDSF issued a RESET joname,Q command and the job was quiesced. We don't use this very often, s I just noticed that in my level of SDSF in z/OS v2.5 it doesn't work. I just checked by z/OS v2.4 system, and it seems to be broken there too. I looks like SDSF issue the RESET jobname command, which causes the IEE308I RESETTERM LENGTH ERROR message to be issued. Has anyone else see this? Gadi -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Security PTFS
Hi, Does IBM publish a list of PTF’s that are related to security, especially preventing unauthorized access from outside the mainframe. Gadi לתשומת ליבך, בהתאם לנהלי חברת מלם מערכות בע"מ ו/או כל חברת בת ו/או חברה קשורה שלה (להלן : "החברה") וזכויות החתימה בהן, כל הצעה, התחייבות או מצג מטעם החברה, מחייבים מסמך נפרד וחתום על ידי מורשי החתימה של החברה, הנושא את לוגו החברה או שמה המודפס ובצירוף חותמת החברה. בהעדר מסמך כאמור (לרבות מסמך סרוק) המצורף להודעת דואר אלקטרוני זאת, אין לראות באמור בהודעה אלא משום טיוטה לדיון, ואין להסתמך עליה לביצוע פעולה עסקית או משפטית כלשהי. Please note that in accordance with Malam and/or its subsidiaries (hereinafter : "Malam") regulations and signatory rights, no offer, agreement, concession or representation is binding on the Malam, unless accompanied by a duly signed separate document (or a scanned version thereof), affixed with the Malam seal. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: LRS VPS Printer Replacment
CA-Spool IBM Infoprint Server Macro4 Columbus Z -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of zos reader Sent: Thursday, December 14, 2017 11:20 AM To: IBM-MAIN@LISTSERV.UA.EDU Subject: LRS VPS Printer Replacment Hi, We are planning to replace LRS VPS Printers to other Vendor product, I am not aware of other vendor products in Market. Can you all share your thoughts please. Thanks.. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN לתשומת ליבך, בהתאם לנהלי חברת מלם מערכות בע"מ ו/או כל חברת בת ו/או חברה קשורה שלה (להלן : "החברה") וזכויות החתימה בהן, כל הצעה, התחייבות או מצג מטעם החברה, מחייבים מסמך נפרד וחתום על ידי מורשי החתימה של החברה, הנושא את לוגו החברה או שמה המודפס ובצירוף חותמת החברה. בהעדר מסמך כאמור (לרבות מסמך סרוק) המצורף להודעת דואר אלקטרוני זאת, אין לראות באמור בהודעה אלא משום טיוטה לדיון, ואין להסתמך עליה לביצוע פעולה עסקית או משפטית כלשהי. Please note that in accordance with Malam and/or its subsidiaries (hereinafter : "Malam") regulations and signatory rights, no offer, agreement, concession or representation is binding on the Malam, unless accompanied by a duly signed separate document (or a scanned version thereof), affixed with the Malam seal. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: CSUSPEND Help (Was Problem after starting PPRC)
I tried that. I ran this command and got the results: CSUSPEND DEVN(X'2A7D') PRIM(X'2A00' 000GDX91 X'7D' X'0A') ANTP0003I MISSING OR INVALID OPERAND. TYPE = SSSID ANTP0003I MISSING OR INVALID OPERAND. TYPE = SSERIAL ANTP0003I MISSING OR INVALID OPERAND. TYPE = SCCA ANTP0001I CSUSPEND COMMAND UNSUCCESSFUL FOR DEVICE 2A7D. COMPLETION CODE: 08 In the meantime, I used Copy Services Manager to stop the PPRC for this volume. Gadi -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of Gonzalo Cengotita Sent: Monday, December 4, 2017 2:30 PM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: CSUSPEND Help (Was Problem after starting PPRC) Hi, do a CQUERY DEVN() where nnn is the devnum you want to suspend and you will find all the info matching with the CSUSPEND command syntax. If you need more detail, please ask Regards, *Gonzalo Cengotita* 2017-12-03 7:41 GMT+01:00 גדי בן אבי <gad...@malam.com>: > Hi, > Can anyone help me with the CSUSPEND help, specifically with the > parameters in the PRIM operand. > How do I find the values I need to specify? > > Thanks > > Gadi > > -----Original Message- > From: גדי בן אבי > Sent: Friday, December 1, 2017 7:10 PM > To: IBM-MAIN@LISTSERV.UA.EDU > Subject: RE: Problem after starting PPRC > > The CSUSPEND command is exactly what I need. > How do I issue it? Under TSO, some other way? > > Gadi > > -Original Message- > From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] > On Behalf Of Mike Schwab > Sent: Friday, December 1, 2017 1:30 PM > To: IBM-MAIN@LISTSERV.UA.EDU > Subject: Re: Problem after starting PPRC > > On Thu, Nov 30, 2017 at 6:22 AM, גדי בן אבי <gad...@malam.com> wrote: > > Hi, > > > > Yesterday we established PPRC (Global Mirror) relationships between > > our > local DS8884 and our remote DS8884. > > This is our first venture into the storage replication area. > > > > We have a series of jobs that use flashcopy to copy a volume to a > secondary volume, and then backu to secondary to tape. This is done > using DFSMSdss. > > The command looks like this: > > COPY FULL ADMINISTRATOR INDYNAM(SCR016) OUTDYNAM(FLSH04) - > > DUMPCONDITIONING FASTREPLICATION(REQUIRED) PURGE ALLDATA(*) - > > ALLEXCP CANCELERROR IF LASTCC = 0 THEN DUMP FULL ADMIN > > INDYNAM(FLSH04) > > OUTDDNAME(OUTPUT) ALLDATA(*) - ALLEXCP OPTIMIZE(4) CANCELERROR > > > > ADR918I (001)-DDTFP(03), FAST REPLICATION COULD NOT BE USED FOR > > VOLUME SCR016, RETURN CODE 9 > > This indicates the source volume SCR016 is in a PPRC pair. > To make the backup copy, SUSPEND the PPRC relationship (updates to > remote volume are stopped but updated tracks are being tracked), make > your copy, then RESUME the PPRC relationship (and updated tracks will be > sent). > > https://www.ibm.com/support/knowledgecenter/en/SSLTBW_2.1. > 0/com.ibm.zos.v2r1.antg000/susvlpr.htm > > -- > Mike A Schwab, Springfield IL USA > Where do Forest Rangers go to get away from it all? > > -- > For IBM-MAIN subscribe / signoff / archive access instructions, send > email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN > לתשומת ליבך, בהתאם לנהלי חברת מלם מערכות בע"מ ו/או כל חברת בת ו/או > חברה קשורה שלה (להלן : "החברה") וזכויות החתימה בהן, כל הצעה, התחייבות > או מצג מטעם החברה, מחייבים מסמך נפרד וחתום על ידי מורשי החתימה של > החברה, הנושא את לוגו החברה או שמה המודפס ובצירוף חותמת החברה. בהעדר > מסמך כאמור (לרבות מסמך > סרוק) המצורף להודעת דואר אלקטרוני זאת, אין לראות באמור בהודעה אלא משום > טיוטה לדיון, ואין להסתמך עליה לביצוע פעולה עסקית או משפטית כלשהי. > Please note that in accordance with Malam and/or its subsidiaries > (hereinafter : > "Malam") regulations and signatory rights, no offer, agreement, > concession or representation is binding on the Malam, unless > accompanied by a duly signed separate document (or a scanned version > thereof), affixed with the Malam seal. > > -- > For IBM-MAIN subscribe / signoff / archive access instructions, send > email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN > -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN לתשומת ליבך, בהתאם לנהלי חברת מלם מערכות בע"מ ו/או כל חברת בת ו/או חברה קשורה שלה (להלן : "החברה") וזכויות החתימה בהן, כל הצעה, התחייבות או מצג מטעם החברה, מחייבים מסמך נפרד וחתום על ידי מורשי החתימה של החברה, הנושא את לוגו החברה או
CSUSPEND Help (Was Problem after starting PPRC)
Hi, Can anyone help me with the CSUSPEND help, specifically with the parameters in the PRIM operand. How do I find the values I need to specify? Thanks Gadi -Original Message- From: גדי בן אבי Sent: Friday, December 1, 2017 7:10 PM To: IBM-MAIN@LISTSERV.UA.EDU Subject: RE: Problem after starting PPRC The CSUSPEND command is exactly what I need. How do I issue it? Under TSO, some other way? Gadi -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of Mike Schwab Sent: Friday, December 1, 2017 1:30 PM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: Problem after starting PPRC On Thu, Nov 30, 2017 at 6:22 AM, גדי בן אבי <gad...@malam.com> wrote: > Hi, > > Yesterday we established PPRC (Global Mirror) relationships between our local > DS8884 and our remote DS8884. > This is our first venture into the storage replication area. > > We have a series of jobs that use flashcopy to copy a volume to a secondary > volume, and then backu to secondary to tape. This is done using DFSMSdss. > The command looks like this: > COPY FULL ADMINISTRATOR INDYNAM(SCR016) OUTDYNAM(FLSH04) - > DUMPCONDITIONING FASTREPLICATION(REQUIRED) PURGE ALLDATA(*) - ALLEXCP > CANCELERROR IF LASTCC = 0 THEN DUMP FULL ADMIN INDYNAM(FLSH04) > OUTDDNAME(OUTPUT) ALLDATA(*) - ALLEXCP OPTIMIZE(4) CANCELERROR > > ADR918I (001)-DDTFP(03), FAST REPLICATION COULD NOT BE USED FOR VOLUME > SCR016, RETURN CODE 9 This indicates the source volume SCR016 is in a PPRC pair. To make the backup copy, SUSPEND the PPRC relationship (updates to remote volume are stopped but updated tracks are being tracked), make your copy, then RESUME the PPRC relationship (and updated tracks will be sent). https://www.ibm.com/support/knowledgecenter/en/SSLTBW_2.1.0/com.ibm.zos.v2r1.antg000/susvlpr.htm -- Mike A Schwab, Springfield IL USA Where do Forest Rangers go to get away from it all? -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN לתשומת ליבך, בהתאם לנהלי חברת מלם מערכות בע"מ ו/או כל חברת בת ו/או חברה קשורה שלה (להלן : "החברה") וזכויות החתימה בהן, כל הצעה, התחייבות או מצג מטעם החברה, מחייבים מסמך נפרד וחתום על ידי מורשי החתימה של החברה, הנושא את לוגו החברה או שמה המודפס ובצירוף חותמת החברה. בהעדר מסמך כאמור (לרבות מסמך סרוק) המצורף להודעת דואר אלקטרוני זאת, אין לראות באמור בהודעה אלא משום טיוטה לדיון, ואין להסתמך עליה לביצוע פעולה עסקית או משפטית כלשהי. Please note that in accordance with Malam and/or its subsidiaries (hereinafter : "Malam") regulations and signatory rights, no offer, agreement, concession or representation is binding on the Malam, unless accompanied by a duly signed separate document (or a scanned version thereof), affixed with the Malam seal. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: Problem after starting PPRC
The CSUSPEND command is exactly what I need. How do I issue it? Under TSO, some other way? Gadi -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of Mike Schwab Sent: Friday, December 1, 2017 1:30 PM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: Problem after starting PPRC On Thu, Nov 30, 2017 at 6:22 AM, גדי בן אבי <gad...@malam.com> wrote: > Hi, > > Yesterday we established PPRC (Global Mirror) relationships between our local > DS8884 and our remote DS8884. > This is our first venture into the storage replication area. > > We have a series of jobs that use flashcopy to copy a volume to a secondary > volume, and then backu to secondary to tape. This is done using DFSMSdss. > The command looks like this: > COPY FULL ADMINISTRATOR INDYNAM(SCR016) OUTDYNAM(FLSH04) - > DUMPCONDITIONING FASTREPLICATION(REQUIRED) PURGE ALLDATA(*) - ALLEXCP > CANCELERROR IF LASTCC = 0 THEN DUMP FULL ADMIN INDYNAM(FLSH04) > OUTDDNAME(OUTPUT) ALLDATA(*) - ALLEXCP OPTIMIZE(4) CANCELERROR > > ADR918I (001)-DDTFP(03), FAST REPLICATION COULD NOT BE USED FOR VOLUME > SCR016, RETURN CODE 9 This indicates the source volume SCR016 is in a PPRC pair. To make the backup copy, SUSPEND the PPRC relationship (updates to remote volume are stopped but updated tracks are being tracked), make your copy, then RESUME the PPRC relationship (and updated tracks will be sent). https://www.ibm.com/support/knowledgecenter/en/SSLTBW_2.1.0/com.ibm.zos.v2r1.antg000/susvlpr.htm -- Mike A Schwab, Springfield IL USA Where do Forest Rangers go to get away from it all? -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN לתשומת ליבך, בהתאם לנהלי חברת מלם מערכות בע"מ ו/או כל חברת בת ו/או חברה קשורה שלה (להלן : "החברה") וזכויות החתימה בהן, כל הצעה, התחייבות או מצג מטעם החברה, מחייבים מסמך נפרד וחתום על ידי מורשי החתימה של החברה, הנושא את לוגו החברה או שמה המודפס ובצירוף חותמת החברה. בהעדר מסמך כאמור (לרבות מסמך סרוק) המצורף להודעת דואר אלקטרוני זאת, אין לראות באמור בהודעה אלא משום טיוטה לדיון, ואין להסתמך עליה לביצוע פעולה עסקית או משפטית כלשהי. Please note that in accordance with Malam and/or its subsidiaries (hereinafter : "Malam") regulations and signatory rights, no offer, agreement, concession or representation is binding on the Malam, unless accompanied by a duly signed separate document (or a scanned version thereof), affixed with the Malam seal. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: Problem after starting PPRC
I know that Is there a way to disable to Peer to Peer relationship in batch so the job will work. Gadi -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of Carmen Vitullo Sent: Thursday, November 30, 2017 3:29 PM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: Problem after starting PPRC A quick look it appears a Peer to Peer relationship was already established with the output volume your error message PPRC PRIM CURRENTLY ACTIVE ADR938E RC 9 in the nice message guide sez X'9' One or more target devices are not eligible for fast replication at this time. When DEBUG(FRMSG(SUMMARIZED)) is specified, return code X'9' is followed by summarized volume information that consists of reason codes that indicate why one or more volumes are not eligible. For each reason code issued, the number of volumes failing for that reason is provided. The reason codes include SDM QFRVOLS volume reason codes (qfrvols_vrsn) and extent reason codes (qfrvols_xrsn). You can use the DEVSRV (DS P) command to check any P-P relationship Carmen Vitullo - Original Message - From: "גדי בן אבי" <gad...@malam.com> To: IBM-MAIN@LISTSERV.UA.EDU Sent: Thursday, November 30, 2017 6:22:11 AM Subject: Problem after starting PPRC Hi, Yesterday we established PPRC (Global Mirror) relationships between our local DS8884 and our remote DS8884. This is our first venture into the storage replication area. We have a series of jobs that use flashcopy to copy a volume to a secondary volume, and then backu to secondary to tape. This is done using DFSMSdss. The command looks like this: COPY FULL ADMINISTRATOR INDYNAM(SCR016) OUTDYNAM(FLSH04) - DUMPCONDITIONING FASTREPLICATION(REQUIRED) PURGE ALLDATA(*) - ALLEXCP CANCELERROR IF LASTCC = 0 THEN DUMP FULL ADMIN INDYNAM(FLSH04) OUTDDNAME(OUTPUT) ALLDATA(*) - ALLEXCP OPTIMIZE(4) CANCELERROR When the jobs ran last night it returned: PAGE 0001 5695-DF175 DFSMSDSS V2R01.0 DATA SET SERVICES 2017.334 05:29 COPY FULL ADMINISTRATOR INDYNAM(SCR016) OUTDYNAM(FLSH04) - DUMPCONDITIONING FASTREPLICATION(REQUIRED) PURGE ALLDATA(*) - ALLEXCP CANCELERROR ADR101I (R/I)-RI01 (01), TASKID 001 HAS BEEN ASSIGNED TO COMMAND 'COPY ' IF LASTCC = 0 THEN ADR101I (R/I)-RI01 (01), TASKID 002 HAS BEEN ASSIGNED TO COMMAND 'IF ' DUMP FULL ADMIN INDYNAM(FLSH04) OUTDDNAME(OUTPUT) ALLDATA(*) - ALLEXCP OPTIMIZE(4) CANCELERROR ADR101I (R/I)-RI01 (01), TASKID 003 HAS BEEN ASSIGNED TO COMMAND 'DUMP ' ADR109I (R/I)-RI01 (01), 2017.334 05:29:33 INITIAL SCAN OF USER CONTROL STATEMENTS COMPLETED ADR016I (001)-PRIME(01), RACF LOGGING OPTION IN EFFECT FOR THIS TASK ADR006I (001)-STEND(01), 2017.334 05:29:33 EXECUTION BEGINS ADR918I (001)-DDTFP(03), FAST REPLICATION COULD NOT BE USED FOR VOLUME SCR016, RETURN CODE 9 1 VOLUME WAS REJECTED FOR QFRVOLS VOLUME REASON CODE 2 - PPRC PRIM CURRENTLY ACTIVE ADR938E (001)-DDTFP(03), FASTREPLICATION(REQUIRED) WAS SPECIFIED BUT FAST REPLICATION COULD NOT BE USED FOR VOLUME SCR016 ADR006I (001)-STEND(02), 2017.334 05:29:33 EXECUTION ENDS ADR013I (001)-CLTSK(01), 2017.334 05:29:33 TASK COMPLETED WITH RETURN CODE 0008 ADR016I (003)-PRIME(01), RACF LOGGING OPTION IN EFFECT FOR THIS TASK ADR006I (003)-STEND(01), 2017.334 05:29:34 EXECUTION BEGINS ADR006I (003)-STEND(02), 2017.334 05:51:15 EXECUTION ENDS ADR013I (003)-CLTSK(01), 2017.334 05:51:15 TASK COMPLETED WITH RETURN CODE ADR012I (SCH)-DSSU (01), 2017.334 05:51:15 DFSMSDSS PROCESSING COMPLETE. HIGHEST RETURN CODE IS 0008 FROM: TASK 001 From what I read, I have to remove the PPRC connection for the Flashcopy Target, and then reestablish it (maybe). Am I correct? How can I do this in batch, hopefully only specifying the VOLSER’s. We are running z/OS v2.1 Thanks Gadi לתשומת ליבך, בהתאם לנהלי חברת מלם מערכות בע"מ ו/או כל חברת בת ו/או חברה קשורה שלה (להלן : "החברה") וזכויות החתימה בהן, כל הצעה, התחייבות או מצג מטעם החברה, מחייבים מסמך נפרד וחתום על ידי מורשי החתימה של החברה, הנושא את לוגו החברה או שמה המודפס ובצירוף חותמת החברה. בהעדר מסמך כאמור (לרבות מסמך סרוק) המצורף להודעת דואר אלקטרוני זאת, אין לראות באמור בהודעה אלא משום טיוטה לדיון, ואין להסתמך עליה לביצוע פעולה עסקית או משפטית כלשהי. Please note that in accordance with Malam and/or its subsidiaries (hereinafter : "Malam") regulations and signatory rights, no offer, agreement, concession or representation is binding on the Malam, unless accompanied by a duly signed separate document (or a scanned version thereof), affixed with the Malam seal. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN לתשומת ליבך, בהתאם לנה
Problem after starting PPRC
Hi, Yesterday we established PPRC (Global Mirror) relationships between our local DS8884 and our remote DS8884. This is our first venture into the storage replication area. We have a series of jobs that use flashcopy to copy a volume to a secondary volume, and then backu to secondary to tape. This is done using DFSMSdss. The command looks like this: COPY FULL ADMINISTRATOR INDYNAM(SCR016) OUTDYNAM(FLSH04) - DUMPCONDITIONING FASTREPLICATION(REQUIRED) PURGE ALLDATA(*) - ALLEXCP CANCELERROR IF LASTCC = 0 THEN DUMP FULL ADMIN INDYNAM(FLSH04) OUTDDNAME(OUTPUT) ALLDATA(*) - ALLEXCP OPTIMIZE(4) CANCELERROR When the jobs ran last night it returned: PAGE 0001 5695-DF175 DFSMSDSS V2R01.0 DATA SET SERVICES 2017.334 05:29 COPY FULL ADMINISTRATOR INDYNAM(SCR016) OUTDYNAM(FLSH04) - DUMPCONDITIONING FASTREPLICATION(REQUIRED) PURGE ALLDATA(*) - ALLEXCP CANCELERROR ADR101I (R/I)-RI01 (01), TASKID 001 HAS BEEN ASSIGNED TO COMMAND 'COPY ' IF LASTCC = 0 THEN ADR101I (R/I)-RI01 (01), TASKID 002 HAS BEEN ASSIGNED TO COMMAND 'IF ' DUMP FULL ADMIN INDYNAM(FLSH04) OUTDDNAME(OUTPUT) ALLDATA(*) - ALLEXCP OPTIMIZE(4) CANCELERROR ADR101I (R/I)-RI01 (01), TASKID 003 HAS BEEN ASSIGNED TO COMMAND 'DUMP ' ADR109I (R/I)-RI01 (01), 2017.334 05:29:33 INITIAL SCAN OF USER CONTROL STATEMENTS COMPLETED ADR016I (001)-PRIME(01), RACF LOGGING OPTION IN EFFECT FOR THIS TASK ADR006I (001)-STEND(01), 2017.334 05:29:33 EXECUTION BEGINS ADR918I (001)-DDTFP(03), FAST REPLICATION COULD NOT BE USED FOR VOLUME SCR016, RETURN CODE 9 1 VOLUME WAS REJECTED FOR QFRVOLS VOLUME REASON CODE 2 - PPRC PRIM CURRENTLY ACTIVE ADR938E (001)-DDTFP(03), FASTREPLICATION(REQUIRED) WAS SPECIFIED BUT FAST REPLICATION COULD NOT BE USED FOR VOLUME SCR016 ADR006I (001)-STEND(02), 2017.334 05:29:33 EXECUTION ENDS ADR013I (001)-CLTSK(01), 2017.334 05:29:33 TASK COMPLETED WITH RETURN CODE 0008 ADR016I (003)-PRIME(01), RACF LOGGING OPTION IN EFFECT FOR THIS TASK ADR006I (003)-STEND(01), 2017.334 05:29:34 EXECUTION BEGINS ADR006I (003)-STEND(02), 2017.334 05:51:15 EXECUTION ENDS ADR013I (003)-CLTSK(01), 2017.334 05:51:15 TASK COMPLETED WITH RETURN CODE ADR012I (SCH)-DSSU (01), 2017.334 05:51:15 DFSMSDSS PROCESSING COMPLETE. HIGHEST RETURN CODE IS 0008 FROM: TASK001 >From what I read, I have to remove the PPRC connection for the Flashcopy >Target, and then reestablish it (maybe). Am I correct? How can I do this in batch, hopefully only specifying the VOLSER’s. We are running z/OS v2.1 Thanks Gadi לתשומת ליבך, בהתאם לנהלי חברת מלם מערכות בע"מ ו/או כל חברת בת ו/או חברה קשורה שלה (להלן : "החברה") וזכויות החתימה בהן, כל הצעה, התחייבות או מצג מטעם החברה, מחייבים מסמך נפרד וחתום על ידי מורשי החתימה של החברה, הנושא את לוגו החברה או שמה המודפס ובצירוף חותמת החברה. בהעדר מסמך כאמור (לרבות מסמך סרוק) המצורף להודעת דואר אלקטרוני זאת, אין לראות באמור בהודעה אלא משום טיוטה לדיון, ואין להסתמך עליה לביצוע פעולה עסקית או משפטית כלשהי. Please note that in accordance with Malam and/or its subsidiaries (hereinafter : "Malam") regulations and signatory rights, no offer, agreement, concession or representation is binding on the Malam, unless accompanied by a duly signed separate document (or a scanned version thereof), affixed with the Malam seal. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: AMATERSE NOT FOUND
AMATERSE should be in SYS1.MIGLIB Gadi -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of johnnydeep san Sent: Thursday, November 9, 2017 10:40 AM To: IBM-MAIN@LISTSERV.UA.EDU Subject: AMATERSE NOT FOUND Hi , I'm getting error "AMATERSE NOT FOUND" while unpack my received file . I couldn't find "AMATERSE" member in any of the LIB in LNKLST, We use OS V 2.1 . While googling i found AMATERSE is a base element come along with OS. But it's not there , is it problem with OS ? or aim I missing anything ? . --JD-- -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN לתשומת ליבך, בהתאם לנהלי חברת מלם מערכות בע"מ ו/או כל חברת בת ו/או חברה קשורה שלה (להלן : "החברה") וזכויות החתימה בהן, כל הצעה, התחייבות או מצג מטעם החברה, מחייבים מסמך נפרד וחתום על ידי מורשי החתימה של החברה, הנושא את לוגו החברה או שמה המודפס ובצירוף חותמת החברה. בהעדר מסמך כאמור (לרבות מסמך סרוק) המצורף להודעת דואר אלקטרוני זאת, אין לראות באמור בהודעה אלא משום טיוטה לדיון, ואין להסתמך עליה לביצוע פעולה עסקית או משפטית כלשהי. Please note that in accordance with Malam and/or its subsidiaries (hereinafter : "Malam") regulations and signatory rights, no offer, agreement, concession or representation is binding on the Malam, unless accompanied by a duly signed separate document (or a scanned version thereof), affixed with the Malam seal. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: JES2 Sizer in z/OS V2.3
I tried that, and got: IEF188I PROBLEM PROGRAM ATTRIBUTES ASSIGNED $HASP433 INVALID SUBSYSTEM EXECUTION MODE And the step ended with RC=20. Gadi -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of Roger Lowe Sent: Sunday, November 5, 2017 3:13 PM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: JES2 Sizer in z/OS V2.3 You can also run the JES2 Init Deck checker as a batch job. //JES2 EXEC JES2 //IEFPROC.HASPLIST DD SYSOUT=Z (override of the DD in the JES2 proc as I wanted the report from the checker to go to a different sysout) Since the site I work at uses System Symbolics in the JES2 proc, you need to ensure the job class you run the job in has Systems Symbols enabled. As part of the report produced by running the above - Recommendations: Current Current Percent Usage per Max with LimitUsage Usage JQE/JOE max JQE/JOE --- --- -- --- JQEs 14,0005,564 39.74 Job Numbers10,0005,556 55.56 0.99 13,860 JOEs 35,0007,322 20.92 1.34 18,760 Active TGs 99,810 60,530 60.64 10.82 151,480 BERTs 28,100 5902.09 JQE BERTs 373 0.06 840 JOE BERTs 52 0.000 Hope the above helps. Roger -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN לתשומת ליבך, בהתאם לנהלי חברת מלם מערכות בע"מ ו/או כל חברת בת ו/או חברה קשורה שלה (להלן : "החברה") וזכויות החתימה בהן, כל הצעה, התחייבות או מצג מטעם החברה, מחייבים מסמך נפרד וחתום על ידי מורשי החתימה של החברה, הנושא את לוגו החברה או שמה המודפס ובצירוף חותמת החברה. בהעדר מסמך כאמור (לרבות מסמך סרוק) המצורף להודעת דואר אלקטרוני זאת, אין לראות באמור בהודעה אלא משום טיוטה לדיון, ואין להסתמך עליה לביצוע פעולה עסקית או משפטית כלשהי. Please note that in accordance with Malam and/or its subsidiaries (hereinafter : "Malam") regulations and signatory rights, no offer, agreement, concession or representation is binding on the Malam, unless accompanied by a duly signed separate document (or a scanned version thereof), affixed with the Malam seal. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: Enterprise COBOL version runtime
I'm sure you've seen this but compile time and compile memory usage are significantly higher. We've seen compile time 50 times higher that with older version of the compiler. With v6.1 we actually run out of auxiliary storage when compiling a very large program. Gadi -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of Bill Ashton Sent: Thursday, November 2, 2017 1:58 PM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Enterprise COBOL version runtime Hello fellow dragon-slayers! We are finally biting the bullet and getting ready to move forward with the Enterprise Cobol v 5. I know there are a lot of changes to v 5 from the world as we know it, and I will be perusing the documentation very soon, but can someone give me a quick 3-foot view of this upgrade specific to one question? If we implement v 5 in our development LPAR before our production LPAR, can we run the v 5 programs/load modules in our v4 production system? Are there any cross-version things we need to be aware of? Thanks for helping me with this question (my management would thank you, too!). Billy -- Thank you and best regards, *Billy Ashton* -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN לתשומת ליבך, בהתאם לנהלי חברת מלם מערכות בע"מ ו/או כל חברת בת ו/או חברה קשורה שלה (להלן : "החברה") וזכויות החתימה בהן, כל הצעה, התחייבות או מצג מטעם החברה, מחייבים מסמך נפרד וחתום על ידי מורשי החתימה של החברה, הנושא את לוגו החברה או שמה המודפס ובצירוף חותמת החברה. בהעדר מסמך כאמור (לרבות מסמך סרוק) המצורף להודעת דואר אלקטרוני זאת, אין לראות באמור בהודעה אלא משום טיוטה לדיון, ואין להסתמך עליה לביצוע פעולה עסקית או משפטית כלשהי. Please note that in accordance with Malam and/or its subsidiaries (hereinafter : "Malam") regulations and signatory rights, no offer, agreement, concession or representation is binding on the Malam, unless accompanied by a duly signed separate document (or a scanned version thereof), affixed with the Malam seal. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: Connect:Direct
Thanks, This is a new installation, so upgrade issues are not relevant. Gadi -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of Shashi Kumar Sent: Tuesday, October 17, 2017 8:26 AM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: Connect:Direct Hi, CD v5.2 as same as V5.1.1, only new feature is network map and we need to create all VSAM files freshly and copy existing files to new files. Thanks, Shashi On Oct 16, 2017 3:35 PM, "גדי בן אבי" <gad...@malam.com> wrote: > Hi, > > I been tasked with installing Connect:Direct on z/OS. > > Does anyone one know of resources the will help me install and > configure it. > > Thanks > > Gadi > > לתשומת ליבך, בהתאם לנהלי חברת מלם מערכות בע"מ ו/או כל חברת בת ו/או > חברה קשורה שלה (להלן : "החברה") וזכויות החתימה בהן, כל הצעה, התחייבות > או מצג מטעם החברה, מחייבים מסמך נפרד וחתום על ידי מורשי החתימה של > החברה, הנושא את לוגו החברה או שמה המודפס ובצירוף חותמת החברה. בהעדר > מסמך כאמור (לרבות מסמך > סרוק) המצורף להודעת דואר אלקטרוני זאת, אין לראות באמור בהודעה אלא משום > טיוטה לדיון, ואין להסתמך עליה לביצוע פעולה עסקית או משפטית כלשהי. > Please note that in accordance with Malam and/or its subsidiaries > (hereinafter : > "Malam") regulations and signatory rights, no offer, agreement, > concession or representation is binding on the Malam, unless > accompanied by a duly signed separate document (or a scanned version > thereof), affixed with the Malam seal. > > -- > For IBM-MAIN subscribe / signoff / archive access instructions, send > email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN > -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN לתשומת ליבך, בהתאם לנהלי חברת מלם מערכות בע"מ ו/או כל חברת בת ו/או חברה קשורה שלה (להלן : "החברה") וזכויות החתימה בהן, כל הצעה, התחייבות או מצג מטעם החברה, מחייבים מסמך נפרד וחתום על ידי מורשי החתימה של החברה, הנושא את לוגו החברה או שמה המודפס ובצירוף חותמת החברה. בהעדר מסמך כאמור (לרבות מסמך סרוק) המצורף להודעת דואר אלקטרוני זאת, אין לראות באמור בהודעה אלא משום טיוטה לדיון, ואין להסתמך עליה לביצוע פעולה עסקית או משפטית כלשהי. Please note that in accordance with Malam and/or its subsidiaries (hereinafter : "Malam") regulations and signatory rights, no offer, agreement, concession or representation is binding on the Malam, unless accompanied by a duly signed separate document (or a scanned version thereof), affixed with the Malam seal. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: Connect:Direct
Hi, Thanks to everyone who answered. The SMP/E part of the installation is simple, just like any other product. I was having problem with the initial configuration. I think I had something wrong, and managed to fix it. It looked like the Network Map was not correct. I might have more questions later on. Thanks everyone Gadi -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of Steve Thompson Sent: Monday, October 16, 2017 6:56 PM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: Connect:Direct Gadi: Regardless of pre-IBM or post IBM copy of C:D, it is a basic SMPE install, so follow the Program Directory or Installation manual. I haven't worked on C:D since 2013. So I don't know how the current Installation configuration manual is titled, and/or what is needed. But, you need to know if this is to be a simple install (one instance of C:D), or if this is to have fail-over, or a C:D Plex. All of that will tell you what you have to do for your configuration. You will also need to know if you are doing IP only, or if you will be using LU0 and/or LU6.2 connections. There are people out there that do C:D work to get things set up for customers. Regards, Steve Thompson On 10/16/2017 06:05 AM, גדי בן אבי wrote: > Hi, > > I been tasked with installing Connect:Direct on z/OS. > > Does anyone one know of resources the will help me install and configure it. > > Thanks > > Gadi > > לתשומת ליבך, בהתאם לנהלי חברת מלם מערכות בע"מ ו/או כל חברת בת ו/או חברה קשורה > שלה (להלן : "החברה") וזכויות החתימה בהן, כל הצעה, התחייבות או מצג מטעם החברה, > מחייבים מסמך נפרד וחתום על ידי מורשי החתימה של החברה, הנושא את לוגו החברה או > שמה המודפס ובצירוף חותמת החברה. בהעדר מסמך כאמור (לרבות מסמך סרוק) המצורף > להודעת דואר אלקטרוני זאת, אין לראות באמור בהודעה אלא משום טיוטה לדיון, ואין > להסתמך עליה לביצוע פעולה עסקית או משפטית כלשהי. Please note that in > accordance with Malam and/or its subsidiaries (hereinafter : "Malam") > regulations and signatory rights, no offer, agreement, concession or > representation is binding on the Malam, unless accompanied by a duly signed > separate document (or a scanned version thereof), affixed with the Malam seal. > > -- > For IBM-MAIN subscribe / signoff / archive access instructions, send > email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN > -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN לתשומת ליבך, בהתאם לנהלי חברת מלם מערכות בע"מ ו/או כל חברת בת ו/או חברה קשורה שלה (להלן : "החברה") וזכויות החתימה בהן, כל הצעה, התחייבות או מצג מטעם החברה, מחייבים מסמך נפרד וחתום על ידי מורשי החתימה של החברה, הנושא את לוגו החברה או שמה המודפס ובצירוף חותמת החברה. בהעדר מסמך כאמור (לרבות מסמך סרוק) המצורף להודעת דואר אלקטרוני זאת, אין לראות באמור בהודעה אלא משום טיוטה לדיון, ואין להסתמך עליה לביצוע פעולה עסקית או משפטית כלשהי. Please note that in accordance with Malam and/or its subsidiaries (hereinafter : "Malam") regulations and signatory rights, no offer, agreement, concession or representation is binding on the Malam, unless accompanied by a duly signed separate document (or a scanned version thereof), affixed with the Malam seal. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Connect:Direct
Hi, I been tasked with installing Connect:Direct on z/OS. Does anyone one know of resources the will help me install and configure it. Thanks Gadi לתשומת ליבך, בהתאם לנהלי חברת מלם מערכות בע"מ ו/או כל חברת בת ו/או חברה קשורה שלה (להלן : "החברה") וזכויות החתימה בהן, כל הצעה, התחייבות או מצג מטעם החברה, מחייבים מסמך נפרד וחתום על ידי מורשי החתימה של החברה, הנושא את לוגו החברה או שמה המודפס ובצירוף חותמת החברה. בהעדר מסמך כאמור (לרבות מסמך סרוק) המצורף להודעת דואר אלקטרוני זאת, אין לראות באמור בהודעה אלא משום טיוטה לדיון, ואין להסתמך עליה לביצוע פעולה עסקית או משפטית כלשהי. Please note that in accordance with Malam and/or its subsidiaries (hereinafter : "Malam") regulations and signatory rights, no offer, agreement, concession or representation is binding on the Malam, unless accompanied by a duly signed separate document (or a scanned version thereof), affixed with the Malam seal. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: Downloading publications from IBM
I am licensed, so that is not a problem. I downloaded it from ShopzSeries. SDF II is not on Knowledge Center. Gadi -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of Lizette Koehler Sent: Tuesday, September 12, 2017 1:23 PM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: Downloading publications from IBM If the product is no longer available from IBM, I do not think the copyrights to the manuals expires. So you may not be able to get a copy. That might be considered breaking copyright laws and regulations. If you are licensed, then it might be okay. I do not think IBM has a "now that it is no longer supported by us, anyone can use it" policy. Lizette > -Original Message- > From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] > On Behalf Of Lizette Koehler > Sent: Tuesday, September 12, 2017 3:14 AM > To: IBM-MAIN@LISTSERV.UA.EDU > Subject: Re: Downloading publications from IBM > > I do not think this is available any more. Though I could be wrong. > If it is no longer active, then I do not think you will find the program > directory. > > > > Screen Definition Facility II for MVS > > Version > 1.4.x > PID > 5665-366 > > License type > ICA > > Lifecycle dates, announcement letters and other information > > GA > 31-Mar-1995, 294-800 > EOM > 01-Jan-2000, 998-295 > > Lifecycle policy > Other > > Last updated: 18-Apr-2008. > > > Lizette > > > > -Original Message- > > From: IBM Mainframe Discussion List > > [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of ??? ?? ??? > > Sent: Tuesday, September 12, 2017 2:49 AM > > To: IBM-MAIN@LISTSERV.UA.EDU > > Subject: Downloading publications from IBM > > > > Hi, > > > > I am trying to download publications from the IBM publication center > > (www.ibm.com/shop/publications/order). > > It looks like something is broken, because any link I click on > > brings me back to the main page. > > > > Is anyone else having this problem. > > > > I'm currently looking for the SDF II program directory, GI18-0278. > > Does anyone have access to a copy they can share. > > > > Thanks > > > > Gadi > > -- > For IBM-MAIN subscribe / signoff / archive access instructions, send > email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN לתשומת ליבך, בהתאם לנהלי חברת מלם מערכות בע"מ ו/או כל חברת בת ו/או חברה קשורה שלה (להלן : "החברה") וזכויות החתימה בהן, כל הצעה, התחייבות או מצג מטעם החברה, מחייבים מסמך נפרד וחתום על ידי מורשי החתימה של החברה, הנושא את לוגו החברה או שמה המודפס ובצירוף חותמת החברה. בהעדר מסמך כאמור (לרבות מסמך סרוק) המצורף להודעת דואר אלקטרוני זאת, אין לראות באמור בהודעה אלא משום טיוטה לדיון, ואין להסתמך עליה לביצוע פעולה עסקית או משפטית כלשהי. Please note that in accordance with Malam and/or its subsidiaries (hereinafter : "Malam") regulations and signatory rights, no offer, agreement, concession or representation is binding on the Malam, unless accompanied by a duly signed separate document (or a scanned version thereof), affixed with the Malam seal. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Downloading publications from IBM
Hi, I am trying to download publications from the IBM publication center (www.ibm.com/shop/publications/order). It looks like something is broken, because any link I click on brings me back to the main page. Is anyone else having this problem. I’m currently looking for the SDF II program directory, GI18-0278. Does anyone have access to a copy they can share. Thanks Gadi לתשומת ליבך, בהתאם לנהלי חברת מלם מערכות בע"מ ו/או כל חברת בת ו/או חברה קשורה שלה (להלן : "החברה") וזכויות החתימה בהן, כל הצעה, התחייבות או מצג מטעם החברה, מחייבים מסמך נפרד וחתום על ידי מורשי החתימה של החברה, הנושא את לוגו החברה או שמה המודפס ובצירוף חותמת החברה. בהעדר מסמך כאמור (לרבות מסמך סרוק) המצורף להודעת דואר אלקטרוני זאת, אין לראות באמור בהודעה אלא משום טיוטה לדיון, ואין להסתמך עליה לביצוע פעולה עסקית או משפטית כלשהי. Please note that in accordance with Malam and/or its subsidiaries (hereinafter : "Malam") regulations and signatory rights, no offer, agreement, concession or representation is binding on the Malam, unless accompanied by a duly signed separate document (or a scanned version thereof), affixed with the Malam seal. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: Problem Mounting File system
The problem was that the ZFS address space had no user assigned to it. Once I fixed that, which required an IPL, everything worked fine. Gadi From: IBM Mainframe Discussion Liston behalf of Lizette Koehler Sent: Wednesday, September 6, 2017 17:09 To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: Problem Mounting File system What was your solution? Second, on z/OS Is a tool called bpxmtext use it on the reason code to determine a possible issue/solution In this case Bpxmtext EF096055 Description: Error with issuing a LOCATE call on an HFS-compat aggregate. Action: Ensure that the zFS file system named on the MOUNT command has the same name as the VSAM Linear Data Set (and the HFS compatibility mode aggregate) that contains the file system. Lizette > -Original Message- > From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On > Behalf Of ??? ?? ??? > Sent: Tuesday, September 05, 2017 10:16 PM > To: IBM-MAIN@LISTSERV.UA.EDU > Subject: Re: Problem Mounting File system > > Thanks > I found the problem. > > Gadi > > -Original Message- > From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On > Behalf Of Sankaranarayanan, Vignesh > Sent: Wednesday, September 6, 2017 8:13 AM > To: IBM-MAIN@LISTSERV.UA.EDU > Subject: Re: Problem Mounting File system > > The user ID ZFS doesn't have access to the CICS zFS file, which is protected > by CICS.* > > - Vignesh > Mainframe Infrastructure > > -Original Message- > From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On > Behalf Of ??? ?? ??? > Sent: 06 September 2017 10:27 > To: IBM-MAIN@LISTSERV.UA.EDU > Subject: Problem Mounting File system > > Hi, > > We are in the process of building a new system running z/OS v2.2 > > When I try to mount a file system, I get: > MOUNT FILESYSTEM('CICS.V54.ZFS') MOUNTPOINT('/usr/lpp/cicsts/cicsts54') > TYPE(ZFS) MODE(RDWR) BPXF135E RETURN CODE 0079, REASON CODE EF096055. > THE MOUNT FAILED FOR FILE SYSTEM CICS.V54.ZFS. > > In the system log, I see > ICH408I JOB(ZFS ) STEP(ZFS ) 467 > CICS.V54.ZFS CL(DATASET ) VOL(G22UC1) > INSUFFICIENT ACCESS AUTHORITY > FROM CICS.* (G) > ACCESS INTENT(READ ) ACCESS ALLOWED(NONE ) > BPXF274I FILE SYSTEM CICS.V54.ZFS 468 > FAILED TO MOUNT. > RETURN CODE = 0079, REASON CODE = EF096055 > > It looks like there is no user associated with ZFS. > I do have a profile in the STARTED class for ZFS.* > > What can be causing this? > > Gadi -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN לתשומת ליבך, בהתאם לנהלי חברת מלם מערכות בע"מ ו/או כל חברת בת ו/או חברה קשורה שלה (להלן : "החברה") וזכויות החתימה בהן, כל הצעה, התחייבות או מצג מטעם החברה, מחייבים מסמך נפרד וחתום על ידי מורשי החתימה של החברה, הנושא את לוגו החברה או שמה המודפס ובצירוף חותמת החברה. בהעדר מסמך כאמור (לרבות מסמך סרוק) המצורף להודעת דואר אלקטרוני זאת, אין לראות באמור בהודעה אלא משום טיוטה לדיון, ואין להסתמך עליה לביצוע פעולה עסקית או משפטית כלשהי. Please note that in accordance with Malam and/or its subsidiaries (hereinafter : "Malam") regulations and signatory rights, no offer, agreement, concession or representation is binding on the Malam, unless accompanied by a duly signed separate document (or a scanned version thereof), affixed with the Malam seal. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: Problem Mounting File system
Thanks I found the problem. Gadi -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of Sankaranarayanan, Vignesh Sent: Wednesday, September 6, 2017 8:13 AM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: Problem Mounting File system The user ID ZFS doesn't have access to the CICS zFS file, which is protected by CICS.* – Vignesh Mainframe Infrastructure -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of ??? ?? ??? Sent: 06 September 2017 10:27 To: IBM-MAIN@LISTSERV.UA.EDU Subject: Problem Mounting File system Hi, We are in the process of building a new system running z/OS v2.2 When I try to mount a file system, I get: MOUNT FILESYSTEM('CICS.V54.ZFS') MOUNTPOINT('/usr/lpp/cicsts/cicsts54') TYPE(ZFS) MODE(RDWR) BPXF135E RETURN CODE 0079, REASON CODE EF096055. THE MOUNT FAILED FOR FILE SYSTEM CICS.V54.ZFS. In the system log, I see ICH408I JOB(ZFS ) STEP(ZFS ) 467 CICS.V54.ZFS CL(DATASET ) VOL(G22UC1) INSUFFICIENT ACCESS AUTHORITY FROM CICS.* (G) ACCESS INTENT(READ ) ACCESS ALLOWED(NONE ) BPXF274I FILE SYSTEM CICS.V54.ZFS 468 FAILED TO MOUNT. RETURN CODE = 0079, REASON CODE = EF096055 It looks like there is no user associated with ZFS. I do have a profile in the STARTED class for ZFS.* What can be causing this? Gadi לתשומת ליבך, בהתאם לנהלי חברת מלם מערכות בע"מ ו/או כל חברת בת ו/או חברה קשורה שלה (להלן : "החברה") וזכויות החתימה בהן, כל הצעה, התחייבות או מצג מטעם החברה, מחייבים מסמך נפרד וחתום על ידי מורשי החתימה של החברה, הנושא את לוגו החברה או שמה המודפס ובצירוף חותמת החברה. בהעדר מסמך כאמור (לרבות מסמך סרוק) המצורף להודעת דואר אלקטרוני זאת, אין לראות באמור בהודעה אלא משום טיוטה לדיון, ואין להסתמך עליה לביצוע פעולה עסקית או משפטית כלשהי. Please note that in accordance with Malam and/or its subsidiaries (hereinafter : "Malam") regulations and signatory rights, no offer, agreement, concession or representation is binding on the Malam, unless accompanied by a duly signed separate document (or a scanned version thereof), affixed with the Malam seal. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN MARKSANDSPENCER.COM Unless otherwise stated above: Marks and Spencer plc Registered Office: Waterside House 35 North Wharf Road London W2 1NW Registered No. 214436 in England and Wales. Telephone (020) 7935 4422 Facsimile (020) 7487 2670 www.marksandspencer.com Please note that electronic mail may be monitored. This e-mail is confidential. If you received it by mistake, please let us know and then delete it from your system; you should not copy, disclose, or distribute its contents to anyone nor act in reliance on this e-mail, as this is prohibited and may be unlawful. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN לתשומת ליבך, בהתאם לנהלי חברת מלם מערכות בע"מ ו/או כל חברת בת ו/או חברה קשורה שלה (להלן : "החברה") וזכויות החתימה בהן, כל הצעה, התחייבות או מצג מטעם החברה, מחייבים מסמך נפרד וחתום על ידי מורשי החתימה של החברה, הנושא את לוגו החברה או שמה המודפס ובצירוף חותמת החברה. בהעדר מסמך כאמור (לרבות מסמך סרוק) המצורף להודעת דואר אלקטרוני זאת, אין לראות באמור בהודעה אלא משום טיוטה לדיון, ואין להסתמך עליה לביצוע פעולה עסקית או משפטית כלשהי. Please note that in accordance with Malam and/or its subsidiaries (hereinafter : "Malam") regulations and signatory rights, no offer, agreement, concession or representation is binding on the Malam, unless accompanied by a duly signed separate document (or a scanned version thereof), affixed with the Malam seal. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Problem Mounting File system
Hi, We are in the process of building a new system running z/OS v2.2 When I try to mount a file system, I get: MOUNT FILESYSTEM('CICS.V54.ZFS') MOUNTPOINT('/usr/lpp/cicsts/cicsts54') TYPE(ZFS) MODE(RDWR) BPXF135E RETURN CODE 0079, REASON CODE EF096055. THE MOUNT FAILED FOR FILE SYSTEM CICS.V54.ZFS. In the system log, I see ICH408I JOB(ZFS ) STEP(ZFS ) 467 CICS.V54.ZFS CL(DATASET ) VOL(G22UC1) INSUFFICIENT ACCESS AUTHORITY FROM CICS.* (G) ACCESS INTENT(READ ) ACCESS ALLOWED(NONE ) BPXF274I FILE SYSTEM CICS.V54.ZFS 468 FAILED TO MOUNT. RETURN CODE = 0079, REASON CODE = EF096055 It looks like there is no user associated with ZFS. I do have a profile in the STARTED class for ZFS.* What can be causing this? Gadi לתשומת ליבך, בהתאם לנהלי חברת מלם מערכות בע"מ ו/או כל חברת בת ו/או חברה קשורה שלה (להלן : "החברה") וזכויות החתימה בהן, כל הצעה, התחייבות או מצג מטעם החברה, מחייבים מסמך נפרד וחתום על ידי מורשי החתימה של החברה, הנושא את לוגו החברה או שמה המודפס ובצירוף חותמת החברה. בהעדר מסמך כאמור (לרבות מסמך סרוק) המצורף להודעת דואר אלקטרוני זאת, אין לראות באמור בהודעה אלא משום טיוטה לדיון, ואין להסתמך עליה לביצוע פעולה עסקית או משפטית כלשהי. Please note that in accordance with Malam and/or its subsidiaries (hereinafter : "Malam") regulations and signatory rights, no offer, agreement, concession or representation is binding on the Malam, unless accompanied by a duly signed separate document (or a scanned version thereof), affixed with the Malam seal. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: ISFPRMxx question
Thanks Rob -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of Rob Scott Sent: Tuesday, August 29, 2017 2:16 PM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: ISFPRMxx question Gadi, If you take a look at the ISFPRM01 member in the SISFJCL dataset, this contains FLD and FLDENT statements for all supplied displays. Note that for all new displays, SDSF only supports a single FLDLIST (i.e. there is not an alternate field list that can be invoked using the "?" primary command). Rob -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of ??? ?? ??? Sent: Tuesday, August 29, 2017 10:33 AM To: IBM-MAIN@LISTSERV.UA.EDU Subject: ISFPRMxx question Hi, We are in the process of customizing a brand new z/OS v2.2 system. The ISFPRMxx member that came with the Server Pac has FLD and FLDENT statements for the DA Display. Is there a way to generate these statements for other displays, so we can customize them? Yes, I know the list of fields is in the manual, but I am looking for something automatic. Thanks Gadi לתשומת ליבך, בהתאם לנהלי חברת מלם מערכות בע"מ ו/או כל חברת בת ו/או חברה קשורה שלה (להלן : "החברה") וזכויות החתימה בהן, כל הצעה, התחייבות או מצג מטעם החברה, מחייבים מסמך נפרד וחתום על ידי מורשי החתימה של החברה, הנושא את לוגו החברה או שמה המודפס ובצירוף חותמת החברה. בהעדר מסמך כאמור (לרבות מסמך סרוק) המצורף להודעת דואר אלקטרוני זאת, אין לראות באמור בהודעה אלא משום טיוטה לדיון, ואין להסתמך עליה לביצוע פעולה עסקית או משפטית כלשהי. Please note that in accordance with Malam and/or its subsidiaries (hereinafter : "Malam") regulations and signatory rights, no offer, agreement, concession or representation is binding on the Malam, unless accompanied by a duly signed separate document (or a scanned version thereof), affixed with the Malam seal. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN Rocket Software, Inc. and subsidiaries ■ 77 Fourth Avenue, Waltham MA 02451 ■ Main Office Toll Free Number: +1 877.328.2932 Contact Customer Support: https://my.rocketsoftware.com/RocketCommunity/RCEmailSupport Unsubscribe from Marketing Messages/Manage Your Subscription Preferences - http://www.rocketsoftware.com/manage-your-email-preferences Privacy Policy - http://www.rocketsoftware.com/company/legal/privacy-policy This communication and any attachments may contain confidential information of Rocket Software, Inc. All unauthorized use, disclosure or distribution is prohibited. If you are not the intended recipient, please notify Rocket Software immediately and destroy all copies of this communication. Thank you. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN לתשומת ליבך, בהתאם לנהלי חברת מלם מערכות בע"מ ו/או כל חברת בת ו/או חברה קשורה שלה (להלן : "החברה") וזכויות החתימה בהן, כל הצעה, התחייבות או מצג מטעם החברה, מחייבים מסמך נפרד וחתום על ידי מורשי החתימה של החברה, הנושא את לוגו החברה או שמה המודפס ובצירוף חותמת החברה. בהעדר מסמך כאמור (לרבות מסמך סרוק) המצורף להודעת דואר אלקטרוני זאת, אין לראות באמור בהודעה אלא משום טיוטה לדיון, ואין להסתמך עליה לביצוע פעולה עסקית או משפטית כלשהי. Please note that in accordance with Malam and/or its subsidiaries (hereinafter : "Malam") regulations and signatory rights, no offer, agreement, concession or representation is binding on the Malam, unless accompanied by a duly signed separate document (or a scanned version thereof), affixed with the Malam seal. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
ISFPRMxx question
Hi, We are in the process of customizing a brand new z/OS v2.2 system. The ISFPRMxx member that came with the Server Pac has FLD and FLDENT statements for the DA Display. Is there a way to generate these statements for other displays, so we can customize them? Yes, I know the list of fields is in the manual, but I am looking for something automatic. Thanks Gadi לתשומת ליבך, בהתאם לנהלי חברת מלם מערכות בע"מ ו/או כל חברת בת ו/או חברה קשורה שלה (להלן : "החברה") וזכויות החתימה בהן, כל הצעה, התחייבות או מצג מטעם החברה, מחייבים מסמך נפרד וחתום על ידי מורשי החתימה של החברה, הנושא את לוגו החברה או שמה המודפס ובצירוף חותמת החברה. בהעדר מסמך כאמור (לרבות מסמך סרוק) המצורף להודעת דואר אלקטרוני זאת, אין לראות באמור בהודעה אלא משום טיוטה לדיון, ואין להסתמך עליה לביצוע פעולה עסקית או משפטית כלשהי. Please note that in accordance with Malam and/or its subsidiaries (hereinafter : "Malam") regulations and signatory rights, no offer, agreement, concession or representation is binding on the Malam, unless accompanied by a duly signed separate document (or a scanned version thereof), affixed with the Malam seal. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: GIM69209S ** RECEIVE PROCESSING HAS FAILED BECAUSE PROGRAM GIMJVCLT COULD NOT BE Started.
PROBLEM RESOLVED I found the problem. Unicode Services was not set up correctly. I found this by running the JVMJCL86 member from samplib. Unicode services requires that SYS1.SCUNTBL and SYS1.SCUNLOCL have those exact names. Once I renamed those files, JVMJCL86 worked fine, and my download file worked fine. Thanks for everyone's help Have a great weekend Gadi. -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of Jousma, David Sent: Friday, August 25, 2017 6:33 PM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: GIM69209S ** RECEIVE PROCESSING HAS FAILED BECAUSE PROGRAM GIMJVCLT COULD NOT BE Started. Sorry, I should have been clearer. Remove the slash AFTER /classes in your SMPE JCL, or in the case of the command line, remove the after the classes/ _ Dave Jousma Manager Mainframe Engineering, Assistant Vice President david.jou...@53.com 1830 East Paris, Grand Rapids, MI 49546 MD RSCB2H p 616.653.8429 f 616.653.2717 -Original Message- From: Jousma, David Sent: Friday, August 25, 2017 11:30 AM To: 'IBM Mainframe Discussion List' Subject: RE: GIM69209S ** RECEIVE PROCESSING HAS FAILED BECAUSE PROGRAM GIMJVCLT COULD NOT BE Started. Gadi, Did you see my recommendation? It looks like you need to remove the trailing slash on your classpath statement. I still see the space: /usr/lpp/java/J8.0_64/bin/java -Dcom.ibm.smp.debug=severe -showversion -cp /usr/lpp/smp/classes/ com.ibm.smp.GIMJVCLT Immediately following your classes/ _ Dave Jousma Manager Mainframe Engineering, Assistant Vice President david.jou...@53.com 1830 East Paris, Grand Rapids, MI 49546 MD RSCB2H p 616.653.8429 f 616.653.2717 -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of ??? ?? ??? Sent: Friday, August 25, 2017 11:17 AM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: GIM69209S ** RECEIVE PROCESSING HAS FAILED BECAUSE PROGRAM GIMJVCLT COULD NOT BE Started. **CAUTION EXTERNAL EMAIL** **DO NOT open attachments or click on links from unknown senders or unexpected emails** I tried downloading the same java version. I uploaded it the z/OS, but when I tried to unpax it I got: # pax -ppx -rvzf SDK8_64bit_SR4_FP10.PAX.Z CEE5207E THE SIGNAL SIGABRT WAS RECEIVED. ־1¨ + Done(131) pax -ppx -rvzf SDK8_64bit_SR4_FP10.PAX.Z 85Abort /bin/pax Does anyone know what this means? I can't seem to find the meaning. Gadi -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of Carmen Vitullo Sent: Friday, August 25, 2017 6:04 PM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: GIM69209S ** RECEIVE PROCESSING HAS FAILED BECAUSE PROGRAM GIMJVCLT COULD NOT BE Started. Sounds like you're on to something, is there any chance you can try with another Java version? I've used Java 6 31 bit with no issues Carmen - Original Message - From: "גדי בן אבי" <gad...@malam.com> To: IBM-MAIN@LISTSERV.UA.EDU Sent: Friday, August 25, 2017 9:49:21 AM Subject: Re: GIM69209S ** RECEIVE PROCESSING HAS FAILED BECAUSE PROGRAM GIMJVCLT COULD NOT BE Started. Hi Kurt, and everyone else who is trying to help. When I issued the command /usr/lpp/java/J8.0_64/bin/java -Dcom.ibm.smp.debug=severe -showversion -cp /usr/lpp/smp/classes/ com.ibm.smp.GIMJVCLT I got the command prompt back immediately. The same thing happens when I issue the command 'java -version' from the java bin directory. To me it looks like there is something wrong with the java installation. Gadi -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of Kurt Quackenbush Sent: Friday, August 25, 2017 12:15 AM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: GIM69209S ** RECEIVE PROCESSING HAS FAILED BECAUSE PROGRAM GIMJVCLT COULD NOT BE Started. On 8/24/2017 9:13 AM, גדי בן אבי wrote: > This is what SYSPRINT says: > -- > DATE 08/24/17 TIME 16:08:40 SERVER Data SMP/E 36.79 > > host="10.202.14.11" > user="gadi_b" > pw="**"> > file="/down_l/rakefet/2008571642_10_PROD/order/GIMPAF.XML" > hash="855F7AE091F92690C9F01A40568F4FA0A9AB8266" > id="ST222133.order"> > > > > -- > DATE 08/24/17 TIME 16:08:40 CLIENT Data SMP/E 36.79 > > javahome="/usr/lpp/java/J8.0_64" > classpath="/usr/lpp/smp/classes" > javadebugoptions="-Dcom.ibm.smp.debug=severe -showversion" > downloadmethod="https" > downloadkeyring="javatruststore"> > > > DATE 08/24/17 TIME 16:08:40 SMP/E GIMJVCLT
Re: GIM69209S ** RECEIVE PROCESSING HAS FAILED BECAUSE PROGRAM GIMJVCLT COULD NOT BE Started.
I tried downloading the same java version. I uploaded it the z/OS, but when I tried to unpax it I got: # pax -ppx -rvzf SDK8_64bit_SR4_FP10.PAX.Z CEE5207E THE SIGNAL SIGABRT WAS RECEIVED. ־1¨ + Done(131) pax -ppx -rvzf SDK8_64bit_SR4_FP10.PAX.Z 85Abort /bin/pax Does anyone know what this means? I can't seem to find the meaning. Gadi -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of Carmen Vitullo Sent: Friday, August 25, 2017 6:04 PM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: GIM69209S ** RECEIVE PROCESSING HAS FAILED BECAUSE PROGRAM GIMJVCLT COULD NOT BE Started. Sounds like you're on to something, is there any chance you can try with another Java version? I've used Java 6 31 bit with no issues Carmen - Original Message - From: "גדי בן אבי" <gad...@malam.com> To: IBM-MAIN@LISTSERV.UA.EDU Sent: Friday, August 25, 2017 9:49:21 AM Subject: Re: GIM69209S ** RECEIVE PROCESSING HAS FAILED BECAUSE PROGRAM GIMJVCLT COULD NOT BE Started. Hi Kurt, and everyone else who is trying to help. When I issued the command /usr/lpp/java/J8.0_64/bin/java -Dcom.ibm.smp.debug=severe -showversion -cp /usr/lpp/smp/classes/ com.ibm.smp.GIMJVCLT I got the command prompt back immediately. The same thing happens when I issue the command 'java -version' from the java bin directory. To me it looks like there is something wrong with the java installation. Gadi -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of Kurt Quackenbush Sent: Friday, August 25, 2017 12:15 AM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: GIM69209S ** RECEIVE PROCESSING HAS FAILED BECAUSE PROGRAM GIMJVCLT COULD NOT BE Started. On 8/24/2017 9:13 AM, גדי בן אבי wrote: > This is what SYSPRINT says: > -- > DATE 08/24/17 TIME 16:08:40 SERVER Data SMP/E 36.79 > > host="10.202.14.11" > user="gadi_b" > pw="**"> > file="/down_l/rakefet/2008571642_10_PROD/order/GIMPAF.XML" > hash="855F7AE091F92690C9F01A40568F4FA0A9AB8266" > id="ST222133.order"> > > > > -- > DATE 08/24/17 TIME 16:08:40 CLIENT Data SMP/E 36.79 > > javahome="/usr/lpp/java/J8.0_64" > classpath="/usr/lpp/smp/classes" > javadebugoptions="-Dcom.ibm.smp.debug=severe -showversion" > downloadmethod="https" > downloadkeyring="javatruststore"> > > > DATE 08/24/17 TIME 16:08:40 SMP/E GIMJVCLT OUTPUT SMP/E 36.79 > > /bin/sh -c /usr/lpp/java/J8.0_64/bin/java -Dcom.ibm.smp.debug=severe > -showversi n -cp /usr/lpp/smp/classes/ com.ibm.smp.GIMJVCLT Yeah, that is strange, as I expect more information in SYSPRINT following this output to explain the error. Could it be that SMP/E was not able to start /bin/sh? Is the userid that is running the job able to start the UNIX shell directly, for example from the TSO/E prompt? As an experiment, try to logon to TSO/E with the userid running the job, start OMVS, and execute this command from the OMVS shell (watch the wrap): /usr/lpp/java/J8.0_64/bin/java -Dcom.ibm.smp.debug=severe -showversion -cp /usr/lpp/smp/classes/ com.ibm.smp.GIMJVCLT You should get a response like this: smpeCC:00 smpeRoutine:GIMJVCLT smpeMsgLen:05 smpeMsg:36.79 What response do you get? If you get the expected response, you can reply with the "terminate" command to stop SMP/E's Java program. Kurt Quackenbush -- IBM, SMP/E Development -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN לתשומת ליבך, בהתאם לנהלי חברת מלם מערכות בע"מ ו/או כל חברת בת ו/או חברה קשורה שלה (להלן : "החברה") וזכויות החתימה בהן, כל הצעה, התחייבות או מצג מטעם החברה, מחייבים מסמך נפרד וחתום על ידי מורשי החתימה של החברה, הנושא את לוגו החברה או שמה המודפס ובצירוף חותמת החברה. בהעדר מסמך כאמור (לרבות מסמך סרוק) המצורף להודעת דואר אלקטרוני זאת, אין לראות באמור בהודעה אלא משום טיוטה לדיון, ואין להסתמך עליה לביצוע פעולה עסקית או משפטית כלשהי. Please note that in accordance with Malam and/or its subsidiaries (hereinafter : "Malam") regulations and signatory rights, no offer, agreement, concession or representation is binding on the Malam, unless accompanied by a duly signed separate document (or a scanned version thereof), affixed with the Malam seal. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: GIM69209S ** RECEIVE PROCESSING HAS FAILED BECAUSE PROGRAM GIMJVCLT COULD NOT BE Started.
Hi Kurt, and everyone else who is trying to help. When I issued the command /usr/lpp/java/J8.0_64/bin/java -Dcom.ibm.smp.debug=severe -showversion -cp /usr/lpp/smp/classes/ com.ibm.smp.GIMJVCLT I got the command prompt back immediately. The same thing happens when I issue the command 'java -version' from the java bin directory. To me it looks like there is something wrong with the java installation. Gadi -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of Kurt Quackenbush Sent: Friday, August 25, 2017 12:15 AM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: GIM69209S ** RECEIVE PROCESSING HAS FAILED BECAUSE PROGRAM GIMJVCLT COULD NOT BE Started. On 8/24/2017 9:13 AM, גדי בן אבי wrote: > This is what SYSPRINT says: > -- > DATE 08/24/17 TIME 16:08:40 SERVER Data SMP/E > 36.79 > >host="10.202.14.11" > user="gadi_b" > pw="**"> >file="/down_l/rakefet/2008571642_10_PROD/order/GIMPAF.XML" > hash="855F7AE091F92690C9F01A40568F4FA0A9AB8266" > id="ST222133.order"> > > > > > -- > DATE 08/24/17 TIME 16:08:40 CLIENT Data SMP/E > 36.79 > > javahome="/usr/lpp/java/J8.0_64" > classpath="/usr/lpp/smp/classes" > javadebugoptions="-Dcom.ibm.smp.debug=severe -showversion" > downloadmethod="https" > downloadkeyring="javatruststore"> > > > DATE 08/24/17 TIME 16:08:40 SMP/E GIMJVCLT OUTPUT SMP/E 36.79 > > /bin/sh -c /usr/lpp/java/J8.0_64/bin/java -Dcom.ibm.smp.debug=severe > -showversi > n -cp /usr/lpp/smp/classes/ com.ibm.smp.GIMJVCLT Yeah, that is strange, as I expect more information in SYSPRINT following this output to explain the error. Could it be that SMP/E was not able to start /bin/sh? Is the userid that is running the job able to start the UNIX shell directly, for example from the TSO/E prompt? As an experiment, try to logon to TSO/E with the userid running the job, start OMVS, and execute this command from the OMVS shell (watch the wrap): /usr/lpp/java/J8.0_64/bin/java -Dcom.ibm.smp.debug=severe -showversion -cp /usr/lpp/smp/classes/ com.ibm.smp.GIMJVCLT You should get a response like this: smpeCC:00 smpeRoutine:GIMJVCLT smpeMsgLen:05 smpeMsg:36.79 What response do you get? If you get the expected response, you can reply with the "terminate" command to stop SMP/E's Java program. Kurt Quackenbush -- IBM, SMP/E Development -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN לתשומת ליבך, בהתאם לנהלי חברת מלם מערכות בע"מ ו/או כל חברת בת ו/או חברה קשורה שלה (להלן : "החברה") וזכויות החתימה בהן, כל הצעה, התחייבות או מצג מטעם החברה, מחייבים מסמך נפרד וחתום על ידי מורשי החתימה של החברה, הנושא את לוגו החברה או שמה המודפס ובצירוף חותמת החברה. בהעדר מסמך כאמור (לרבות מסמך סרוק) המצורף להודעת דואר אלקטרוני זאת, אין לראות באמור בהודעה אלא משום טיוטה לדיון, ואין להסתמך עליה לביצוע פעולה עסקית או משפטית כלשהי. Please note that in accordance with Malam and/or its subsidiaries (hereinafter : "Malam") regulations and signatory rights, no offer, agreement, concession or representation is binding on the Malam, unless accompanied by a duly signed separate document (or a scanned version thereof), affixed with the Malam seal. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: GIM69209S ** RECEIVE PROCESSING HAS FAILED BECAUSE PROGRAM GIMJVCLT COULD NOT BE Started.
Java is there It's V8 64 bit. -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of Allan Staller Sent: Thursday, August 24, 2017 3:30 PM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: GIM69209S ** RECEIVE PROCESSING HAS FAILED BECAUSE PROGRAM GIMJVCLT COULD NOT BE Started. As a rough guess. See if you actually still have JAVA 1.4 on you system. In OMVS on the system in use cd /usr/lpp/java ls -al If java 1.2 is present you should see J4.0 or J4.0_64 The current versions of java are Java7 and Java8 -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of Richards, Robert B. Sent: Thursday, August 24, 2017 5:44 AM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: GIM69209S ** RECEIVE PROCESSING HAS FAILED BECAUSE PROGRAM GIMJVCLT COULD NOT BE Started. >From QuickRef: SMP/E attempted to invoke the indicated program but it could not be started. System action Command processing stops. Programmer response Check the output in the print file to determine the cause of the error. SYSPRINT is SMP/E's default print file, and is used if no PRINT subentry was specified in the active UTILITY entry for the HFSCOPY utility. Depending on what the output indicates, do the following tasks and rerun the job: o If the output indicates Java is not found, then ensure the directory of the Java 2 Technology Edition that is specified using either a SMPJHOME DD statement or DDDEF entry is correct. For example, if Java 1.4 is installed in the /usr/lpp/java/J1.4 directory, then the following DD statement should be used: //SMPJHOME DD PATH='/usr/lpp/java/J1.4/' If using the RECEIVE ORDER or RECEIVE FROMNETWORK command or the GIMGTPKG service routine, you can alternatively specify the javahome attribute in the CLIENT data set to indicate the directory where the Java runtime resides. Use the following as an example: javahome="/usr/lpp/java/J1.4" o If the output indicates a Java class is not found, then ensure the SMP/E Java application classes are accessible to SMP/E. The Java classpath can be specified using a SMPCPATH DD statement or DDDEF entry. For example, if the SMP/E Java classes reside in the /usr/lpp/smp/classes/ directory, then the following DD statement should be used: //SMPCPATH DD PATH='/usr/lpp/smp/classes/' If running an SMP/E command rather than a service routine, you can also use a DDDEF entry for SMPCPATH instead of a DD statement. In addition, if using the RECEIVE ORDER or RECEIVE FROMNETWORK command or the GIMGTPKG service routine, you can alternatively use the classpath attribute in the CLIENT data set to specify the directory where the Java runtime resides. For example: classpath="/usr/lpp/smp/classes/" o If the output does not indicate that Java or a Java class is not found, and if you are using the RECEIVE ORDER or RECEIVE FROMNETWORK command or the GIMGTPKG service routine, and if the javadebugoptions attribute was specified in the CLIENT data set, then ensure the specified values are proper and correct. See "Preparing to use internet service retrieval", especially the topic "Options that affect Java" in SMP/E for z/OS User's Guide for details on proper setup. -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of ??? ?? ??? Sent: Thursday, August 24, 2017 5:40 AM To: IBM-MAIN@LISTSERV.UA.EDU Subject: GIM69209S ** RECEIVE PROCESSING HAS FAILED BECAUSE PROGRAM GIMJVCLT COULD NOT BE Started. Hi, I am setting up a brand new system, running z/OS v2.2 I ordered a product from shopzseries, and I am trying to download it using the RFNJOBH downloaded from shopzseries. I am getting the message GIM69209S ** RECEIVE PROCESSING HAS FAILED BECAUSE PROGRAM GIMJVCLT COULD NOT BE Started. I’ve looked at everything mentioned in the message manual, and it all seems ok. Here is the job I am using: //V110GA37 JOB (00),'',CLASS=X,MSGCLASS=X,PRTY=9, // NOTIFY= //SMPER1 EXEC PGM=GIMSMP,REGION=0M,MEMLIMIT=4G, // PARM='PROCESS=WAIT' //SMPCSI DD DISP=SHR,DSN=SYSG.SMPE.GLOBAL.CSI <=== NOTE 1 //SMPNTS DD PATHDISP=KEEP, // PATH='/u/smpe/smpnts/' <=== NOTE 2 //SMPWKDIR DD PATHDISP=KEEP, // PATH='/u/smpe/workdir/' <=== NOTE 3 //SMPCPATH DD PATH='/usr/lpp/smp/classes/' <=== NOTE 4 //SMPOUT DD SYSOUT=* //SMPRPT DD SYSOUT=* //SMPLIST DD SYSOUT=* //SYSPRINT DD SYSOUT=* //SMPCNTL DD * SET BOUNDARY (GLOBAL) . RECEIVE FROMNETWORK( SERVER(SERVINFO) /* TRANSFERONLY <=== NOTE 5 */ CLIENT(CLNTINFO) ) . /* //SERVINFO DD * /* //* //CLNTINFO DD * /* Gadi לתשומת ליבך, בהתאם לנהלי חברת מלם מערכות בע"מ ו/או כל חברת בת ו/או חברה
Re: GIM69209S ** RECEIVE PROCESSING HAS FAILED BECAUSE PROGRAM GIMJVCLT COULD NOT BE Started.
This is what SYSPRINT says: -- DATE 08/24/17 TIME 16:08:40 SERVER Data SMP/E 36.79 -- DATE 08/24/17 TIME 16:08:40 CLIENT Data SMP/E 36.79 DATE 08/24/17 TIME 16:08:40 SMP/E GIMJVCLT OUTPUT SMP/E 36.79 /bin/sh -c /usr/lpp/java/J8.0_64/bin/java -Dcom.ibm.smp.debug=severe -showversi n -cp /usr/lpp/smp/classes/ com.ibm.smp.GIMJVCLT -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of Kurt Quackenbush Sent: Thursday, August 24, 2017 3:20 PM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: GIM69209S ** RECEIVE PROCESSING HAS FAILED BECAUSE PROGRAM GIMJVCLT COULD NOT BE Started. On 8/24/2017 6:55 AM, גדי בן אבי wrote: > I've checked all of those options OK, you've checked all those options, but what did you actually find in SYSPRINT? Hard for anyone to debug without showing us the content of SYSPRINT. Kurt Quackenbush -- IBM, SMP/E Development -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN לתשומת ליבך, בהתאם לנהלי חברת מלם מערכות בע"מ ו/או כל חברת בת ו/או חברה קשורה שלה (להלן : "החברה") וזכויות החתימה בהן, כל הצעה, התחייבות או מצג מטעם החברה, מחייבים מסמך נפרד וחתום על ידי מורשי החתימה של החברה, הנושא את לוגו החברה או שמה המודפס ובצירוף חותמת החברה. בהעדר מסמך כאמור (לרבות מסמך סרוק) המצורף להודעת דואר אלקטרוני זאת, אין לראות באמור בהודעה אלא משום טיוטה לדיון, ואין להסתמך עליה לביצוע פעולה עסקית או משפטית כלשהי. Please note that in accordance with Malam and/or its subsidiaries (hereinafter : "Malam") regulations and signatory rights, no offer, agreement, concession or representation is binding on the Malam, unless accompanied by a duly signed separate document (or a scanned version thereof), affixed with the Malam seal. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: GIM69209S ** RECEIVE PROCESSING HAS FAILED BECAUSE PROGRAM GIMJVCLT COULD NOT BE Started.
I tried. Didn't help -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of Richards, Robert B. Sent: Thursday, August 24, 2017 2:41 PM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: GIM69209S ** RECEIVE PROCESSING HAS FAILED BECAUSE PROGRAM GIMJVCLT COULD NOT BE Started. Could MEMLIMIT be the culprit? -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of ??? ?? ??? Sent: Thursday, August 24, 2017 7:29 AM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: GIM69209S ** RECEIVE PROCESSING HAS FAILED BECAUSE PROGRAM GIMJVCLT COULD NOT BE Started. I have GIMJVCLT.class in that directory -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of Elardus Engelbrecht Sent: Thursday, August 24, 2017 2:12 PM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: GIM69209S ** RECEIVE PROCESSING HAS FAILED BECAUSE PROGRAM GIMJVCLT COULD NOT BE Started. Gadi wrote: >I am getting the message >GIM69209S ** RECEIVE PROCESSING HAS FAILED BECAUSE PROGRAM GIMJVCLT COULD NOT >BE Started. >I've looked at everything mentioned in the message manual, and it all seems ok. Warning: I'm not working in SMP/E, but ... ;-) I see you got good replies and that you don't get any RACF messages... Look in /usr/lpp/smp/classes/com/ibm/smp if class GIMJVCLT is there or not. Groete / Greetings Elardus Engelbrecht -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN לתשומת ליבך, בהתאם לנהלי חברת מלם מערכות בע"מ ו/או כל חברת בת ו/או חברה קשורה שלה (להלן : "החברה") וזכויות החתימה בהן, כל הצעה, התחייבות או מצג מטעם החברה, מחייבים מסמך נפרד וחתום על ידי מורשי החתימה של החברה, הנושא את לוגו החברה או שמה המודפס ובצירוף חותמת החברה. בהעדר מסמך כאמור (לרבות מסמך סרוק) המצורף להודעת דואר אלקטרוני זאת, אין לראות באמור בהודעה אלא משום טיוטה לדיון, ואין להסתמך עליה לביצוע פעולה עסקית או משפטית כלשהי. Please note that in accordance with Malam and/or its subsidiaries (hereinafter : "Malam") regulations and signatory rights, no offer, agreement, concession or representation is binding on the Malam, unless accompanied by a duly signed separate document (or a scanned version thereof), affixed with the Malam seal. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN לתשומת ליבך, בהתאם לנהלי חברת מלם מערכות בע"מ ו/או כל חברת בת ו/או חברה קשורה שלה (להלן : "החברה") וזכויות החתימה בהן, כל הצעה, התחייבות או מצג מטעם החברה, מחייבים מסמך נפרד וחתום על ידי מורשי החתימה של החברה, הנושא את לוגו החברה או שמה המודפס ובצירוף חותמת החברה. בהעדר מסמך כאמור (לרבות מסמך סרוק) המצורף להודעת דואר אלקטרוני זאת, אין לראות באמור בהודעה אלא משום טיוטה לדיון, ואין להסתמך עליה לביצוע פעולה עסקית או משפטית כלשהי. Please note that in accordance with Malam and/or its subsidiaries (hereinafter : "Malam") regulations and signatory rights, no offer, agreement, concession or representation is binding on the Malam, unless accompanied by a duly signed separate document (or a scanned version thereof), affixed with the Malam seal. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: GIM69209S ** RECEIVE PROCESSING HAS FAILED BECAUSE PROGRAM GIMJVCLT COULD NOT BE Started.
I have GIMJVCLT.class in that directory -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of Elardus Engelbrecht Sent: Thursday, August 24, 2017 2:12 PM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: GIM69209S ** RECEIVE PROCESSING HAS FAILED BECAUSE PROGRAM GIMJVCLT COULD NOT BE Started. Gadi wrote: >I am getting the message >GIM69209S ** RECEIVE PROCESSING HAS FAILED BECAUSE PROGRAM GIMJVCLT COULD NOT >BE Started. >I've looked at everything mentioned in the message manual, and it all seems ok. Warning: I'm not working in SMP/E, but ... ;-) I see you got good replies and that you don't get any RACF messages... Look in /usr/lpp/smp/classes/com/ibm/smp if class GIMJVCLT is there or not. Groete / Greetings Elardus Engelbrecht -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN לתשומת ליבך, בהתאם לנהלי חברת מלם מערכות בע"מ ו/או כל חברת בת ו/או חברה קשורה שלה (להלן : "החברה") וזכויות החתימה בהן, כל הצעה, התחייבות או מצג מטעם החברה, מחייבים מסמך נפרד וחתום על ידי מורשי החתימה של החברה, הנושא את לוגו החברה או שמה המודפס ובצירוף חותמת החברה. בהעדר מסמך כאמור (לרבות מסמך סרוק) המצורף להודעת דואר אלקטרוני זאת, אין לראות באמור בהודעה אלא משום טיוטה לדיון, ואין להסתמך עליה לביצוע פעולה עסקית או משפטית כלשהי. Please note that in accordance with Malam and/or its subsidiaries (hereinafter : "Malam") regulations and signatory rights, no offer, agreement, concession or representation is binding on the Malam, unless accompanied by a duly signed separate document (or a scanned version thereof), affixed with the Malam seal. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: GIM69209S ** RECEIVE PROCESSING HAS FAILED BECAUSE PROGRAM GIMJVCLT COULD NOT BE Started.
There were no errors is SYSLOG, of any type. -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of Lucas Rosalen Sent: Thursday, August 24, 2017 1:23 PM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: GIM69209S ** RECEIVE PROCESSING HAS FAILED BECAUSE PROGRAM GIMJVCLT COULD NOT BE Started. RACF errors in syslog? On Aug 24, 2017 11:48, "גדי בן אבי" <gad...@malam.com> wrote: > That’s the user id and password that shopzseries created :-) > > > -Original Message- > From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] > On Behalf Of ITschak Mugzach > Sent: Thursday, August 24, 2017 12:43 PM > To: IBM-MAIN@LISTSERV.UA.EDU > Subject: Re: GIM69209S ** RECEIVE PROCESSING HAS FAILED BECAUSE > PROGRAM GIMJVCLT COULD NOT BE Started. > > Nice userid & password... > > בתאריך 24 באוג 2017 12:40, "גדי בן אבי" <gad...@malam.com> כתב: > > > Hi, > > > > I am setting up a brand new system, running z/OS v2.2 > > > > I ordered a product from shopzseries, and I am trying to download it > > using the RFNJOBH downloaded from shopzseries. > > > > I am getting the message > > GIM69209S ** RECEIVE PROCESSING HAS FAILED BECAUSE PROGRAM GIMJVCLT > > COULD NOT BE Started. > > > > I’ve looked at everything mentioned in the message manual, and it > > all seems ok. > > > > Here is the job I am using: > > //V110GA37 JOB (00),'',CLASS=X,MSGCLASS=X,PRTY=9, > > // NOTIFY= > > //SMPER1 EXEC PGM=GIMSMP,REGION=0M,MEMLIMIT=4G, > > // PARM='PROCESS=WAIT' > > //SMPCSI DD DISP=SHR,DSN=SYSG.SMPE.GLOBAL.CSI <=== NOTE 1 > > //SMPNTS DD PATHDISP=KEEP, > > // PATH='/u/smpe/smpnts/' <=== NOTE 2 > > //SMPWKDIR DD PATHDISP=KEEP, > > // PATH='/u/smpe/workdir/' <=== NOTE 3 > > //SMPCPATH DD PATH='/usr/lpp/smp/classes/' <=== NOTE 4 > > //SMPOUT DD SYSOUT=* > > //SMPRPT DD SYSOUT=* > > //SMPLIST DD SYSOUT=* > > //SYSPRINT DD SYSOUT=* > > //SMPCNTL DD * > > SET BOUNDARY (GLOBAL) . > > RECEIVE > > FROMNETWORK( > > SERVER(SERVINFO) > > /* TRANSFERONLY <=== NOTE 5 */ > > CLIENT(CLNTINFO) > > ) > >. > > /* > > //SERVINFO DD * > > > host="deliverycb-mul.dhe.ibm.com" > > user="P404n421" > > pw="k6q1794E" > > > > > >file="2017081650107/PROD/GIMPAF.XML" > > hash="C67534FA316BC23C9AE77039DF2C6507714FE87F" > >id="STP45994" > >> > > > > > > /* > > //* > > //CLNTINFO DD * > > > javahome="/usr/lpp/java/J8.0_64" > > classpath="/usr/lpp/smp/classes/" > > downloadmethod="https" > > downloadkeyring="javatruststore"> > > > > /* > > > > Gadi > > לתשומת ליבך, בהתאם לנהלי חברת מלם מערכות בע"מ ו/או כל חברת בת ו/או > > חברה קשורה שלה (להלן : "החברה") וזכויות החתימה בהן, כל הצעה, > > התחייבות או מצג מטעם החברה, מחייבים מסמך נפרד וחתום על ידי מורשי > > החתימה של החברה, הנושא את לוגו החברה או שמה המודפס ובצירוף חותמת > > החברה. בהעדר מסמך כאמור (לרבות מסמך > > סרוק) המצורף להודעת דואר אלקטרוני זאת, אין לראות באמור בהודעה אלא > > משום טיוטה לדיון, ואין להסתמך עליה לביצוע פעולה עסקית או משפטית כלשהי. > > Please note that in accordance with Malam and/or its subsidiaries > (hereinafter : > > "Malam") regulations and signatory rights, no offer, agreement, > > concession or representation is binding on the Malam, unless > > accompanied by a duly signed separate document (or a scanned version > > thereof), affixed with the Malam seal. > > > > > > -- For IBM-MAIN subscribe / signoff / archive access instructions, > > send email to lists...@listserv.ua.edu with the message: INFO > > IBM-MAIN > > > > -- > For IBM-MAIN subscribe / signoff / archive access instructions, send > email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN > לתשומת ליבך, בהתאם לנהלי חברת מלם מערכות בע"מ ו/או כל חברת בת ו/או > חברה קשורה שלה (להלן : "החברה") וזכויות החתימה בהן, כל הצעה, התחייבות > או מצג מטעם החברה, מחייבים מסמך נפרד וחתום על ידי מורשי החתימה של > החבר
Re: GIM69209S ** RECEIVE PROCESSING HAS FAILED BECAUSE PROGRAM GIMJVCLT COULD NOT BE Started.
I've checked all of those options -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of Richards, Robert B. Sent: Thursday, August 24, 2017 1:44 PM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: GIM69209S ** RECEIVE PROCESSING HAS FAILED BECAUSE PROGRAM GIMJVCLT COULD NOT BE Started. >From QuickRef: SMP/E attempted to invoke the indicated program but it could not be started. System action Command processing stops. Programmer response Check the output in the print file to determine the cause of the error. SYSPRINT is SMP/E's default print file, and is used if no PRINT subentry was specified in the active UTILITY entry for the HFSCOPY utility. Depending on what the output indicates, do the following tasks and rerun the job: o If the output indicates Java is not found, then ensure the directory of the Java 2 Technology Edition that is specified using either a SMPJHOME DD statement or DDDEF entry is correct. For example, if Java 1.4 is installed in the /usr/lpp/java/J1.4 directory, then the following DD statement should be used: //SMPJHOME DD PATH='/usr/lpp/java/J1.4/' If using the RECEIVE ORDER or RECEIVE FROMNETWORK command or the GIMGTPKG service routine, you can alternatively specify the javahome attribute in the CLIENT data set to indicate the directory where the Java runtime resides. Use the following as an example: javahome="/usr/lpp/java/J1.4" o If the output indicates a Java class is not found, then ensure the SMP/E Java application classes are accessible to SMP/E. The Java classpath can be specified using a SMPCPATH DD statement or DDDEF entry. For example, if the SMP/E Java classes reside in the /usr/lpp/smp/classes/ directory, then the following DD statement should be used: //SMPCPATH DD PATH='/usr/lpp/smp/classes/' If running an SMP/E command rather than a service routine, you can also use a DDDEF entry for SMPCPATH instead of a DD statement. In addition, if using the RECEIVE ORDER or RECEIVE FROMNETWORK command or the GIMGTPKG service routine, you can alternatively use the classpath attribute in the CLIENT data set to specify the directory where the Java runtime resides. For example: classpath="/usr/lpp/smp/classes/" o If the output does not indicate that Java or a Java class is not found, and if you are using the RECEIVE ORDER or RECEIVE FROMNETWORK command or the GIMGTPKG service routine, and if the javadebugoptions attribute was specified in the CLIENT data set, then ensure the specified values are proper and correct. See "Preparing to use internet service retrieval", especially the topic "Options that affect Java" in SMP/E for z/OS User's Guide for details on proper setup. -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of ??? ?? ??? Sent: Thursday, August 24, 2017 5:40 AM To: IBM-MAIN@LISTSERV.UA.EDU Subject: GIM69209S ** RECEIVE PROCESSING HAS FAILED BECAUSE PROGRAM GIMJVCLT COULD NOT BE Started. Hi, I am setting up a brand new system, running z/OS v2.2 I ordered a product from shopzseries, and I am trying to download it using the RFNJOBH downloaded from shopzseries. I am getting the message GIM69209S ** RECEIVE PROCESSING HAS FAILED BECAUSE PROGRAM GIMJVCLT COULD NOT BE Started. I’ve looked at everything mentioned in the message manual, and it all seems ok. Here is the job I am using: //V110GA37 JOB (00),'',CLASS=X,MSGCLASS=X,PRTY=9, // NOTIFY= //SMPER1 EXEC PGM=GIMSMP,REGION=0M,MEMLIMIT=4G, // PARM='PROCESS=WAIT' //SMPCSI DD DISP=SHR,DSN=SYSG.SMPE.GLOBAL.CSI <=== NOTE 1 //SMPNTS DD PATHDISP=KEEP, // PATH='/u/smpe/smpnts/' <=== NOTE 2 //SMPWKDIR DD PATHDISP=KEEP, // PATH='/u/smpe/workdir/' <=== NOTE 3 //SMPCPATH DD PATH='/usr/lpp/smp/classes/' <=== NOTE 4 //SMPOUT DD SYSOUT=* //SMPRPT DD SYSOUT=* //SMPLIST DD SYSOUT=* //SYSPRINT DD SYSOUT=* //SMPCNTL DD * SET BOUNDARY (GLOBAL) . RECEIVE FROMNETWORK( SERVER(SERVINFO) /* TRANSFERONLY <=== NOTE 5 */ CLIENT(CLNTINFO) ) . /* //SERVINFO DD * /* //* //CLNTINFO DD * /* Gadi לתשומת ליבך, בהתאם לנהלי חברת מלם מערכות בע"מ ו/או כל חברת בת ו/או חברה קשורה שלה (להלן : "החברה") וזכויות החתימה בהן, כל הצעה, התחייבות או מצג מטעם החברה, מחייבים מסמך נפרד וחתום על ידי מורשי החתימה של החברה, הנושא את לוגו החברה או שמה המודפס ובצירוף חותמת החברה. בהעדר מסמך כאמור (לרבות מסמך סרוק) המצורף להודעת דואר אלקטרוני זאת, אין לראות באמור בהודעה אלא משום טיוטה לדיון, ואין להסתמך עליה לביצוע פעולה עסקית או משפטית כלשהי. Please note that in accordance with Malam and/or its subsidiaries (hereinafter : "Malam") regulations and signatory rights, no offer, agreement, concession or
Re: GIM69209S ** RECEIVE PROCESSING HAS FAILED BECAUSE PROGRAM GIMJVCLT COULD NOT BE Started.
That’s the user id and password that shopzseries created :-) -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of ITschak Mugzach Sent: Thursday, August 24, 2017 12:43 PM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: GIM69209S ** RECEIVE PROCESSING HAS FAILED BECAUSE PROGRAM GIMJVCLT COULD NOT BE Started. Nice userid & password... בתאריך 24 באוג 2017 12:40, "גדי בן אבי" <gad...@malam.com> כתב: > Hi, > > I am setting up a brand new system, running z/OS v2.2 > > I ordered a product from shopzseries, and I am trying to download it > using the RFNJOBH downloaded from shopzseries. > > I am getting the message > GIM69209S ** RECEIVE PROCESSING HAS FAILED BECAUSE PROGRAM GIMJVCLT > COULD NOT BE Started. > > I’ve looked at everything mentioned in the message manual, and it all > seems ok. > > Here is the job I am using: > //V110GA37 JOB (00),'',CLASS=X,MSGCLASS=X,PRTY=9, > // NOTIFY= > //SMPER1 EXEC PGM=GIMSMP,REGION=0M,MEMLIMIT=4G, > // PARM='PROCESS=WAIT' > //SMPCSI DD DISP=SHR,DSN=SYSG.SMPE.GLOBAL.CSI <=== NOTE 1 > //SMPNTS DD PATHDISP=KEEP, > // PATH='/u/smpe/smpnts/' <=== NOTE 2 > //SMPWKDIR DD PATHDISP=KEEP, > // PATH='/u/smpe/workdir/' <=== NOTE 3 > //SMPCPATH DD PATH='/usr/lpp/smp/classes/' <=== NOTE 4 > //SMPOUT DD SYSOUT=* > //SMPRPT DD SYSOUT=* > //SMPLIST DD SYSOUT=* > //SYSPRINT DD SYSOUT=* > //SMPCNTL DD * > SET BOUNDARY (GLOBAL) . > RECEIVE > FROMNETWORK( > SERVER(SERVINFO) > /* TRANSFERONLY <=== NOTE 5 */ > CLIENT(CLNTINFO) > ) >. > /* > //SERVINFO DD * > host="deliverycb-mul.dhe.ibm.com" > user="P404n421" > pw="k6q1794E" > > > file="2017081650107/PROD/GIMPAF.XML" > hash="C67534FA316BC23C9AE77039DF2C6507714FE87F" >id="STP45994" >> > > > /* > //* > //CLNTINFO DD * > javahome="/usr/lpp/java/J8.0_64" > classpath="/usr/lpp/smp/classes/" > downloadmethod="https" > downloadkeyring="javatruststore"> > > /* > > Gadi > לתשומת ליבך, בהתאם לנהלי חברת מלם מערכות בע"מ ו/או כל חברת בת ו/או > חברה קשורה שלה (להלן : "החברה") וזכויות החתימה בהן, כל הצעה, התחייבות > או מצג מטעם החברה, מחייבים מסמך נפרד וחתום על ידי מורשי החתימה של > החברה, הנושא את לוגו החברה או שמה המודפס ובצירוף חותמת החברה. בהעדר > מסמך כאמור (לרבות מסמך > סרוק) המצורף להודעת דואר אלקטרוני זאת, אין לראות באמור בהודעה אלא משום > טיוטה לדיון, ואין להסתמך עליה לביצוע פעולה עסקית או משפטית כלשהי. > Please note that in accordance with Malam and/or its subsidiaries > (hereinafter : > "Malam") regulations and signatory rights, no offer, agreement, > concession or representation is binding on the Malam, unless > accompanied by a duly signed separate document (or a scanned version > thereof), affixed with the Malam seal. > > -- > For IBM-MAIN subscribe / signoff / archive access instructions, send > email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN > -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN לתשומת ליבך, בהתאם לנהלי חברת מלם מערכות בע"מ ו/או כל חברת בת ו/או חברה קשורה שלה (להלן : "החברה") וזכויות החתימה בהן, כל הצעה, התחייבות או מצג מטעם החברה, מחייבים מסמך נפרד וחתום על ידי מורשי החתימה של החברה, הנושא את לוגו החברה או שמה המודפס ובצירוף חותמת החברה. בהעדר מסמך כאמור (לרבות מסמך סרוק) המצורף להודעת דואר אלקטרוני זאת, אין לראות באמור בהודעה אלא משום טיוטה לדיון, ואין להסתמך עליה לביצוע פעולה עסקית או משפטית כלשהי. Please note that in accordance with Malam and/or its subsidiaries (hereinafter : "Malam") regulations and signatory rights, no offer, agreement, concession or representation is binding on the Malam, unless accompanied by a duly signed separate document (or a scanned version thereof), affixed with the Malam seal. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
GIM69209S ** RECEIVE PROCESSING HAS FAILED BECAUSE PROGRAM GIMJVCLT COULD NOT BE Started.
Hi, I am setting up a brand new system, running z/OS v2.2 I ordered a product from shopzseries, and I am trying to download it using the RFNJOBH downloaded from shopzseries. I am getting the message GIM69209S ** RECEIVE PROCESSING HAS FAILED BECAUSE PROGRAM GIMJVCLT COULD NOT BE Started. I’ve looked at everything mentioned in the message manual, and it all seems ok. Here is the job I am using: //V110GA37 JOB (00),'',CLASS=X,MSGCLASS=X,PRTY=9, // NOTIFY= //SMPER1 EXEC PGM=GIMSMP,REGION=0M,MEMLIMIT=4G, // PARM='PROCESS=WAIT' //SMPCSI DD DISP=SHR,DSN=SYSG.SMPE.GLOBAL.CSI <=== NOTE 1 //SMPNTS DD PATHDISP=KEEP, // PATH='/u/smpe/smpnts/' <=== NOTE 2 //SMPWKDIR DD PATHDISP=KEEP, // PATH='/u/smpe/workdir/' <=== NOTE 3 //SMPCPATH DD PATH='/usr/lpp/smp/classes/' <=== NOTE 4 //SMPOUT DD SYSOUT=* //SMPRPT DD SYSOUT=* //SMPLIST DD SYSOUT=* //SYSPRINT DD SYSOUT=* //SMPCNTL DD * SET BOUNDARY (GLOBAL) . RECEIVE FROMNETWORK( SERVER(SERVINFO) /* TRANSFERONLY <=== NOTE 5 */ CLIENT(CLNTINFO) ) . /* //SERVINFO DD * /* //* //CLNTINFO DD * /* Gadi לתשומת ליבך, בהתאם לנהלי חברת מלם מערכות בע"מ ו/או כל חברת בת ו/או חברה קשורה שלה (להלן : "החברה") וזכויות החתימה בהן, כל הצעה, התחייבות או מצג מטעם החברה, מחייבים מסמך נפרד וחתום על ידי מורשי החתימה של החברה, הנושא את לוגו החברה או שמה המודפס ובצירוף חותמת החברה. בהעדר מסמך כאמור (לרבות מסמך סרוק) המצורף להודעת דואר אלקטרוני זאת, אין לראות באמור בהודעה אלא משום טיוטה לדיון, ואין להסתמך עליה לביצוע פעולה עסקית או משפטית כלשהי. Please note that in accordance with Malam and/or its subsidiaries (hereinafter : "Malam") regulations and signatory rights, no offer, agreement, concession or representation is binding on the Malam, unless accompanied by a duly signed separate document (or a scanned version thereof), affixed with the Malam seal. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
events in the New York area
Hi, Does anyone know of any mainframe related events in the New York are between now and August 9th? Thanks לתשומת ליבך, בהתאם לנהלי חברת מלם מערכות בע"מ ו/או כל חברת בת ו/או חברה קשורה שלה (להלן : "החברה") וזכויות החתימה בהן, כל הצעה, התחייבות או מצג מטעם החברה, מחייבים מסמך נפרד וחתום על ידי מורשי החתימה של החברה, הנושא את לוגו החברה או שמה המודפס ובצירוף חותמת החברה. בהעדר מסמך כאמור (לרבות מסמך סרוק) המצורף להודעת דואר אלקטרוני זאת, אין לראות באמור בהודעה אלא משום טיוטה לדיון, ואין להסתמך עליה לביצוע פעולה עסקית או משפטית כלשהי. Please note that in accordance with Malam and/or its subsidiaries (hereinafter : "Malam") regulations and signatory rights, no offer, agreement, concession or representation is binding on the Malam, unless accompanied by a duly signed separate document (or a scanned version thereof), affixed with the Malam seal. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
7760
Hi, We’re being offered a TS7760, and I have some questions: 1.Can the machine be partitioned to serve two separate, unconnected systems? How flexible is the partition? Must it be fixed when the system is configured, or can I change it later? 2.Are any additional operating system components needed? We are currently running z/OS v2.1. 3.Are the files that represent the tapes accessible? Could I copy them to an external drive and store them somewhere else? 4.Is there a ‘TS7760 for dummies’ book? Thanks Gadi לתשומת ליבך, בהתאם לנהלי חברת מלם מערכות בע"מ ו/או כל חברת בת ו/או חברה קשורה שלה (להלן : "החברה") וזכויות החתימה בהן, כל הצעה, התחייבות או מצג מטעם החברה, מחייבים מסמך נפרד וחתום על ידי מורשי החתימה של החברה, הנושא את לוגו החברה או שמה המודפס ובצירוף חותמת החברה. בהעדר מסמך כאמור (לרבות מסמך סרוק) המצורף להודעת דואר אלקטרוני זאת, אין לראות באמור בהודעה אלא משום טיוטה לדיון, ואין להסתמך עליה לביצוע פעולה עסקית או משפטית כלשהי. Please note that in accordance with Malam and/or its subsidiaries (hereinafter : "Malam") regulations and signatory rights, no offer, agreement, concession or representation is binding on the Malam, unless accompanied by a duly signed separate document (or a scanned version thereof), affixed with the Malam seal. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: IRA702I
Hi, Issuing the command when the IEF403I is issued solved the problem. I guess the $HASP373 is issued to early in the jobs life. Thanks for everyone's help. Gadi -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of Lizette Koehler Sent: Tuesday, July 4, 2017 8:32 AM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: IRA702I Is the reset command being entered on the LPAR where the job is running? Does OPS have the authority to issue the command against the job? When you issue it under SDSF, the authorization could be different than if OPS enters it. Lizette > -Original Message- > From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] > On Behalf Of ??? ?? ??? > Sent: Monday, July 03, 2017 10:15 PM > To: IBM-MAIN@LISTSERV.UA.EDU > Subject: Re: IRA702I > > Yes, when I issue the command using SDSF, it works. > I'll try to issue the command a bit later. > Gadi > > -Original Message- > From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] > On Behalf Of Jim Mulder > Sent: Tuesday, July 4, 2017 8:00 AM > To: IBM-MAIN@LISTSERV.UA.EDU > Subject: Re: IRA702I > > RESET is not allowed for an idle initiator. It might be that the > $HASP373 message > is issued before the SYSEVENT that tells SRM that a job is running in > the address space. > > If you manually issue the RESET command a little later, does it work? > > Jim Mulder z/OS Diagnosis, Design, Development, Test IBM Corp. > Poughkeepsie NY > > > From: גדי בן אבי <gad...@malam.com> > > To: IBM-MAIN@LISTSERV.UA.EDU > > Date: 07/04/2017 12:51 AM > > Subject: Re: IRA702I > > Sent by: IBM Mainframe Discussion List <IBM-MAIN@LISTSERV.UA.EDU> > > > > This is a standard batch job. No enclaves of any kind are involved, > > I > hope. > > The first program in the job is IDCAMS. The reset command is issued > > automatically in response to the $HASP373 message that is issue when > > the job starts working. > > -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN לתשומת ליבך, בהתאם לנהלי חברת מלם מערכות בע"מ ו/או כל חברת בת ו/או חברה קשורה שלה (להלן : "החברה") וזכויות החתימה בהן, כל הצעה, התחייבות או מצג מטעם החברה, מחייבים מסמך נפרד וחתום על ידי מורשי החתימה של החברה, הנושא את לוגו החברה או שמה המודפס ובצירוף חותמת החברה. בהעדר מסמך כאמור (לרבות מסמך סרוק) המצורף להודעת דואר אלקטרוני זאת, אין לראות באמור בהודעה אלא משום טיוטה לדיון, ואין להסתמך עליה לביצוע פעולה עסקית או משפטית כלשהי. Please note that in accordance with Malam and/or its subsidiaries (hereinafter : "Malam") regulations and signatory rights, no offer, agreement, concession or representation is binding on the Malam, unless accompanied by a duly signed separate document (or a scanned version thereof), affixed with the Malam seal. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: IRA702I
Yes, when I issue the command using SDSF, it works. I'll try to issue the command a bit later. Gadi -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of Jim Mulder Sent: Tuesday, July 4, 2017 8:00 AM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: IRA702I RESET is not allowed for an idle initiator. It might be that the $HASP373 message is issued before the SYSEVENT that tells SRM that a job is running in the address space. If you manually issue the RESET command a little later, does it work? Jim Mulder z/OS Diagnosis, Design, Development, Test IBM Corp. Poughkeepsie NY > From: גדי בן אבי <gad...@malam.com> > To: IBM-MAIN@LISTSERV.UA.EDU > Date: 07/04/2017 12:51 AM > Subject: Re: IRA702I > Sent by: IBM Mainframe Discussion List <IBM-MAIN@LISTSERV.UA.EDU> > > This is a standard batch job. No enclaves of any kind are involved, I hope. > The first program in the job is IDCAMS. The reset command is issued > automatically in response to the $HASP373 message that is issue when > the job starts working. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN לתשומת ליבך, בהתאם לנהלי חברת מלם מערכות בע"מ ו/או כל חברת בת ו/או חברה קשורה שלה (להלן : "החברה") וזכויות החתימה בהן, כל הצעה, התחייבות או מצג מטעם החברה, מחייבים מסמך נפרד וחתום על ידי מורשי החתימה של החברה, הנושא את לוגו החברה או שמה המודפס ובצירוף חותמת החברה. בהעדר מסמך כאמור (לרבות מסמך סרוק) המצורף להודעת דואר אלקטרוני זאת, אין לראות באמור בהודעה אלא משום טיוטה לדיון, ואין להסתמך עליה לביצוע פעולה עסקית או משפטית כלשהי. Please note that in accordance with Malam and/or its subsidiaries (hereinafter : "Malam") regulations and signatory rights, no offer, agreement, concession or representation is binding on the Malam, unless accompanied by a duly signed separate document (or a scanned version thereof), affixed with the Malam seal. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: IRA702I
Hi, The request was to change the Service Class for a specific Class when it is run on one LPAR, but not another. I tried setting it using the WLM policy, but couldn't get it to work, so I turned to OPS. This has worked in the past for some jobs, and has failed for others. I usually have no problem changing the service class using SDSF. Gadi -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of Lizette Koehler Sent: Tuesday, July 4, 2017 7:45 AM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: IRA702I I am curious - if you are automatically changing the service class when it starts, why not permanently assign the class? When did you start changing the service class? Has it worked in the past changing the service class? Is this the first time you are trying to automatically change the service class? Is the mechanism you are using to change the service class authorized to use the command? Lizette > -Original Message- > From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] > On Behalf Of ??? ?? ??? > Sent: Monday, July 03, 2017 9:22 PM > To: IBM-MAIN@LISTSERV.UA.EDU > Subject: Re: IRA702I > > This is a standard batch job. No enclaves of any kind are involved, I hope. > The first program in the job is IDCAMS. The reset command is issued > automatically in response to the $HASP373 message that is issue when > the job starts working. > Gadi > > -Original Message- > From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] > On Behalf Of John McKown > Sent: Monday, July 3, 2017 5:27 PM > To: IBM-MAIN@LISTSERV.UA.EDU > Subject: Re: IRA702I > > On Mon, Jul 3, 2017 at 12:07 AM, גדי בן אבי <gad...@malam.com> wrote: > > > Sorry, but what is a EWLM service class. > > > > New on one me too. Enterprise Workload Manager > https://www.ibm.com/support/knowledgecenter/en/SSLTBW_2.2.0/com.ibm.zos.v2r2. > ieaw200/ieaw20021.htm > > [quote] > With enclave services, work managers that use enclaves to manage and > report individual business transactions can become Enterprise Workload > Manager™ > (EWLM) participants. EWLM allows you to define business-oriented > performance goals for an entire domain of servers across a variety of > platforms (z/OS®, AIX®, i5/OS™, Windows, Solaris and Linux), and then > get an end-to-end view of actual performance relative to those goals. > > [quote/] > > What program is being run in the job step at the time of the RESET > command? > > > > Gadi > > > > > > > > > -- > Veni, Vidi, VISA: I came, I saw, I did a little shopping. > > Maranatha! <>< > John McKown > -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN לתשומת ליבך, בהתאם לנהלי חברת מלם מערכות בע"מ ו/או כל חברת בת ו/או חברה קשורה שלה (להלן : "החברה") וזכויות החתימה בהן, כל הצעה, התחייבות או מצג מטעם החברה, מחייבים מסמך נפרד וחתום על ידי מורשי החתימה של החברה, הנושא את לוגו החברה או שמה המודפס ובצירוף חותמת החברה. בהעדר מסמך כאמור (לרבות מסמך סרוק) המצורף להודעת דואר אלקטרוני זאת, אין לראות באמור בהודעה אלא משום טיוטה לדיון, ואין להסתמך עליה לביצוע פעולה עסקית או משפטית כלשהי. Please note that in accordance with Malam and/or its subsidiaries (hereinafter : "Malam") regulations and signatory rights, no offer, agreement, concession or representation is binding on the Malam, unless accompanied by a duly signed separate document (or a scanned version thereof), affixed with the Malam seal. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: IRA702I
This is a standard batch job. No enclaves of any kind are involved, I hope. The first program in the job is IDCAMS. The reset command is issued automatically in response to the $HASP373 message that is issue when the job starts working. Gadi -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of John McKown Sent: Monday, July 3, 2017 5:27 PM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: IRA702I On Mon, Jul 3, 2017 at 12:07 AM, גדי בן אבי <gad...@malam.com> wrote: > Sorry, but what is a EWLM service class. > New on one me too. Enterprise Workload Manager https://www.ibm.com/support/knowledgecenter/en/SSLTBW_2.2.0/com.ibm.zos.v2r2.ieaw200/ieaw20021.htm [quote] With enclave services, work managers that use enclaves to manage and report individual business transactions can become Enterprise Workload Manager™ (EWLM) participants. EWLM allows you to define business-oriented performance goals for an entire domain of servers across a variety of platforms (z/OS®, AIX®, i5/OS™, Windows, Solaris and Linux), and then get an end-to-end view of actual performance relative to those goals. [quote/] What program is being run in the job step at the time of the RESET command? > Gadi > > > -- Veni, Vidi, VISA: I came, I saw, I did a little shopping. Maranatha! <>< John McKown -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN לתשומת ליבך, בהתאם לנהלי חברת מלם מערכות בע"מ ו/או כל חברת בת ו/או חברה קשורה שלה (להלן : "החברה") וזכויות החתימה בהן, כל הצעה, התחייבות או מצג מטעם החברה, מחייבים מסמך נפרד וחתום על ידי מורשי החתימה של החברה, הנושא את לוגו החברה או שמה המודפס ובצירוף חותמת החברה. בהעדר מסמך כאמור (לרבות מסמך סרוק) המצורף להודעת דואר אלקטרוני זאת, אין לראות באמור בהודעה אלא משום טיוטה לדיון, ואין להסתמך עליה לביצוע פעולה עסקית או משפטית כלשהי. Please note that in accordance with Malam and/or its subsidiaries (hereinafter : "Malam") regulations and signatory rights, no offer, agreement, concession or representation is binding on the Malam, unless accompanied by a duly signed separate document (or a scanned version thereof), affixed with the Malam seal. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: Passing value to instream data in a procedure
Thanks. I was able to adopt this to my neads. Gadi -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of Don Poitras Sent: Monday, July 3, 2017 1:20 PM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: Passing value to instream data in a procedure See: https://www.ibm.com/support/knowledgecenter/en/SSLTBW_2.2.0/com.ibm.zos.v2r2.ieab600/iea3b6_Example_of_the_SYMBOLS_parameter.htm It's available in 2.1 as well. In article <3f165b407d984b1eafa38752203a8...@jer-mail13.jer.ad.malam.com> you wrote: > Hi, > I would like to write a procedure that will receive two parameters and > substitute them for the two parameters in the ftp put statement > Something like this: > //FTP1 PROC F1='F1',F2='F2' > //FTP EXEC PGM=FTP,REGION=2M, > // PARM='10.202.14.11 (EXIT TIMEOUT 300' > //NETRC DD DSN=V110GAD.NETRC,DISP=SHR > //SYSTCPD DD DSN=SYSV.TCPIP.CMP1.PARMS(TCPDATA),DISP=SHR > //SYSPRINT DD SYSOUT=* > //OUTPUT DD SYSOUT=* > //XDD SYSOUT=* > //INPUT DD *cd '/temp' > sendsite > bin > PUT > quit > //FTP1 PEND > //FF EXEC FTP1,F1='V110GAD.CNTL(J)',F2='J.TXT' > We are using z/OS v2.1 > I am getting the messages: > IEFC657I THE SYMBOL F1 WAS NOT USED > IEFC657I THE SYMBOL F2 WAS NOT USED > Is this possible? > What am missing? > Thanks > Gadi -- Don Poitras - SAS Development - SAS Institute Inc. - SAS Campus Drive sas...@sas.com (919) 531-5637Cary, NC 27513 -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN לתשומת ליבך, בהתאם לנהלי חברת מלם מערכות בע"מ ו/או כל חברת בת ו/או חברה קשורה שלה (להלן : "החברה") וזכויות החתימה בהן, כל הצעה, התחייבות או מצג מטעם החברה, מחייבים מסמך נפרד וחתום על ידי מורשי החתימה של החברה, הנושא את לוגו החברה או שמה המודפס ובצירוף חותמת החברה. בהעדר מסמך כאמור (לרבות מסמך סרוק) המצורף להודעת דואר אלקטרוני זאת, אין לראות באמור בהודעה אלא משום טיוטה לדיון, ואין להסתמך עליה לביצוע פעולה עסקית או משפטית כלשהי. Please note that in accordance with Malam and/or its subsidiaries (hereinafter : "Malam") regulations and signatory rights, no offer, agreement, concession or representation is binding on the Malam, unless accompanied by a duly signed separate document (or a scanned version thereof), affixed with the Malam seal. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Passing value to instream data in a procedure
Hi, I would like to write a procedure that will receive two parameters and substitute them for the two parameters in the ftp put statement Something like this: //FTP1 PROC F1='F1',F2='F2' //FTP EXEC PGM=FTP,REGION=2M, // PARM='10.202.14.11 (EXIT TIMEOUT 300' //NETRC DD DSN=V110GAD.NETRC,DISP=SHR //SYSTCPD DD DSN=SYSV.TCPIP.CMP1.PARMS(TCPDATA),DISP=SHR //SYSPRINT DD SYSOUT=* //OUTPUT DD SYSOUT=* //XDD SYSOUT=* //INPUT DD *cd '/temp' sendsite bin PUT quit //FTP1 PEND //FF EXEC FTP1,F1='V110GAD.CNTL(J)',F2='J.TXT' We are using z/OS v2.1 I am getting the messages: IEFC657I THE SYMBOL F1 WAS NOT USED IEFC657I THE SYMBOL F2 WAS NOT USED Is this possible? What am missing? Thanks Gadi לתשומת ליבך, בהתאם לנהלי חברת מלם מערכות בע"מ ו/או כל חברת בת ו/או חברה קשורה שלה (להלן : "החברה") וזכויות החתימה בהן, כל הצעה, התחייבות או מצג מטעם החברה, מחייבים מסמך נפרד וחתום על ידי מורשי החתימה של החברה, הנושא את לוגו החברה או שמה המודפס ובצירוף חותמת החברה. בהעדר מסמך כאמור (לרבות מסמך סרוק) המצורף להודעת דואר אלקטרוני זאת, אין לראות באמור בהודעה אלא משום טיוטה לדיון, ואין להסתמך עליה לביצוע פעולה עסקית או משפטית כלשהי. Please note that in accordance with Malam and/or its subsidiaries (hereinafter : "Malam") regulations and signatory rights, no offer, agreement, concession or representation is binding on the Malam, unless accompanied by a duly signed separate document (or a scanned version thereof), affixed with the Malam seal. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: IRA702I
The original service class is a standard batch service class, so is the one I am trying to change to. The purpose is to give the job a higher performance. The original service class is defined as: * Service Class BATMED - medium priority batch Created by user JEMCCOY on 2000/05/19 at 13:59:52 Base last updated by user V120DOD on 2013/02/24 at 10:35:59 Base goal: CPU Critical = NOI/O Priority Group = NORMAL # Duration Imp Goal description - - - 1 4Execution velocity of 12 The next service class is: * Service Class BATHI - high priority batch Created by user JEMCCOY on 2000/05/19 at 13:59:29 Base last updated by user V120DOD on 2017/03/01 at 13:16:31 Base goal: CPU Critical = NOI/O Priority Group = NORMAL # Duration Imp Goal description - - - 1 3Execution velocity of 8 -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of Lizette Koehler Sent: Monday, July 3, 2017 8:22 AM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: IRA702I You could do a search in KB or KC for ewlm and find lots of hits. Enterprise Workload Manager (EWLM) With enclave services, work managers that use enclaves to manage and report individual business transactions can become Enterprise Workload ManagerT (EWLM) participants. EWLM allows you to define business-oriented performance goals for an entire domain of servers across a variety of platforms (z/OSR, AIXR, i5/OST, Windows, Solaris and Linux), and then get an end-to-end view of actual performance relative to those goals. You can use enclave services to: Connect a calling address space to WLM as an EWLM participant Classify work requests in order to assign an EWLM transaction class Indicate the start and end of an EWLM work request Block work requests while waiting for the completion of a work request in another application. So what service class is the job in. What is the different service class going to do? Any messages in SYSLOG Other than the IRA702I What issue are you trying to solve by changing the service class? Lizette > -Original Message- > From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] > On Behalf Of ??? ?? ??? > Sent: Sunday, July 02, 2017 10:07 PM > To: IBM-MAIN@LISTSERV.UA.EDU > Subject: Re: IRA702I > > Sorry, but what is a EWLM service class. > > Gadi > > -Original Message- > From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] > On Behalf Of Jim Mulder > Sent: Sunday, July 2, 2017 8:11 PM > To: IBM-MAIN@LISTSERV.UA.EDU > Subject: Re: IRA702I > > For a job, the most likely cause of IRA702I would be that the > currently assigned service class is an EWLM service class. > > Jim Mulder z/OS Diagnosis, Design, Development, Test IBM Corp. > Poughkeepsie NY > > > We are getting message IRA702I when trying to change the Service > > Class of a job. > > This job was submitted by a TSO user. > > > > E N620SCR3,SRVCLASS=BATHI > > IRA702I RESET NOT VALID FOR N620SCR3. IT IS A SYSTEM-CONTROLLED > > ADDRESS > SPACE > > > > How can we fix this? > > > > We are using z/OS v2.1 > > -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN לתשומת ליבך, בהתאם לנהלי חברת מלם מערכות בע"מ ו/או כל חברת בת ו/או חברה קשורה שלה (להלן : "החברה") וזכויות החתימה בהן, כל הצעה, התחייבות או מצג מטעם החברה, מחייבים מסמך נפרד וחתום על ידי מורשי החתימה של החברה, הנושא את לוגו החברה או שמה המודפס ובצירוף חותמת החברה. בהעדר מסמך כאמור (לרבות מסמך סרוק) המצורף להודעת דואר אלקטרוני זאת, אין לראות באמור בהודעה אלא משום טיוטה לדיון, ואין להסתמך עליה לביצוע פעולה עסקית או משפטית כלשהי. Please note that in accordance with Malam and/or its subsidiaries (hereinafter : "Malam") regulations and signatory rights, no offer, agreement, concession or representation is binding on the Malam, unless accompanied by a duly signed separate document (or a scanned version thereof), affixed with the Malam seal. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: IRA702I
Sorry, but what is a EWLM service class. Gadi -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of Jim Mulder Sent: Sunday, July 2, 2017 8:11 PM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: IRA702I For a job, the most likely cause of IRA702I would be that the currently assigned service class is an EWLM service class. Jim Mulder z/OS Diagnosis, Design, Development, Test IBM Corp. Poughkeepsie NY > We are getting message IRA702I when trying to change the Service Class > of a job. > This job was submitted by a TSO user. > > E N620SCR3,SRVCLASS=BATHI > IRA702I RESET NOT VALID FOR N620SCR3. IT IS A SYSTEM-CONTROLLED > ADDRESS SPACE > > How can we fix this? > > We are using z/OS v2.1 -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN לתשומת ליבך, בהתאם לנהלי חברת מלם מערכות בע"מ ו/או כל חברת בת ו/או חברה קשורה שלה (להלן : "החברה") וזכויות החתימה בהן, כל הצעה, התחייבות או מצג מטעם החברה, מחייבים מסמך נפרד וחתום על ידי מורשי החתימה של החברה, הנושא את לוגו החברה או שמה המודפס ובצירוף חותמת החברה. בהעדר מסמך כאמור (לרבות מסמך סרוק) המצורף להודעת דואר אלקטרוני זאת, אין לראות באמור בהודעה אלא משום טיוטה לדיון, ואין להסתמך עליה לביצוע פעולה עסקית או משפטית כלשהי. Please note that in accordance with Malam and/or its subsidiaries (hereinafter : "Malam") regulations and signatory rights, no offer, agreement, concession or representation is binding on the Malam, unless accompanied by a duly signed separate document (or a scanned version thereof), affixed with the Malam seal. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: IRA702I
N620SCR3 is a batch job, submitted from TSO/ISPF Gadi From: IBM Mainframe Discussion Liston behalf of Lizette Koehler Sent: Sunday, July 2, 2017 17:39 To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: IRA702I There are restrictions on what Tasks can be reset in WLM. What is N620SCR3? If it falls into the area defined by the restrictions, I am not sure you can do this. >From the IRA702I Message System programmer response If you want to control the address space, put it in a service class other than the subsystem default service class by creating a rule in your service definition classification rules. You cannot reset privileged work. For details on restrictions that apply to resetting privileged work, see the RESET command of z/OS MVS System Commands. Restrictions The MASTER address space, idle INIT / ASCHINT initiator address spaces, and the WLM address space may not be reset. There are no restrictions for the RESET command when the originating and target service classes are both customer-defined. Attempts to move a privileged or high dispatching priority address space into a customer-defined service class are rejected with message, IRA702I RESET NOT VALID. With APAR OA12625 installed, attempts to move a privileged address space into a customer-defined service class are allowed and no longer rejected with message IRA702I. RESET can be used to move eligible address spaces (not just started tasks) from a customer-defined service class to the SYSSTC service class. If the address space originally was privileged, the privileged attribute is restored. RESET can be used to move started tasks eligible for high dispatching priority into the SYSTEM service class. The high dispatching attribute is restored when the started task is moved into SYSTEM. Lizette > -Original Message- > From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On > Behalf Of ??? ?? ??? > Sent: Sunday, July 02, 2017 12:36 AM > To: IBM-MAIN@LISTSERV.UA.EDU > Subject: IRA702I > > Hi, > We are getting message IRA702I when trying to change the Service Class of a > job. > This job was submitted by a TSO user. > > > E N620SCR3,SRVCLASS=BATHI > IRA702I RESET NOT VALID FOR N620SCR3. IT IS A SYSTEM-CONTROLLED ADDRESS SPACE > > How can we fix this? > > We are using z/OS v2.1 > > Thanks > > Gadi -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN לתשומת ליבך, בהתאם לנהלי חברת מלם מערכות בע"מ ו/או כל חברת בת ו/או חברה קשורה שלה (להלן : "החברה") וזכויות החתימה בהן, כל הצעה, התחייבות או מצג מטעם החברה, מחייבים מסמך נפרד וחתום על ידי מורשי החתימה של החברה, הנושא את לוגו החברה או שמה המודפס ובצירוף חותמת החברה. בהעדר מסמך כאמור (לרבות מסמך סרוק) המצורף להודעת דואר אלקטרוני זאת, אין לראות באמור בהודעה אלא משום טיוטה לדיון, ואין להסתמך עליה לביצוע פעולה עסקית או משפטית כלשהי. Please note that in accordance with Malam and/or its subsidiaries (hereinafter : "Malam") regulations and signatory rights, no offer, agreement, concession or representation is binding on the Malam, unless accompanied by a duly signed separate document (or a scanned version thereof), affixed with the Malam seal. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: IRA702I
Which program name? The first step of the job is IDCAMS, it's not defined anywhere in SCHEDxx Gadi -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of ITschak Mugzach Sent: Sunday, July 2, 2017 10:47 AM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: IRA702I My guess is that the program name defind as system task in schedxx. ITschak בתאריך 2 ביול 2017 10:36, "גדי בן אבי" <gad...@malam.com> כתב: > Hi, > We are getting message IRA702I when trying to change the Service Class > of a job. > This job was submitted by a TSO user. > > > E N620SCR3,SRVCLASS=BATHI > IRA702I RESET NOT VALID FOR N620SCR3. IT IS A SYSTEM-CONTROLLED > ADDRESS SPACE > > How can we fix this? > > We are using z/OS v2.1 > > Thanks > > Gadi > לתשומת ליבך, בהתאם לנהלי חברת מלם מערכות בע"מ ו/או כל חברת בת ו/או > חברה קשורה שלה (להלן : "החברה") וזכויות החתימה בהן, כל הצעה, התחייבות > או מצג מטעם החברה, מחייבים מסמך נפרד וחתום על ידי מורשי החתימה של > החברה, הנושא את לוגו החברה או שמה המודפס ובצירוף חותמת החברה. בהעדר > מסמך כאמור (לרבות מסמך > סרוק) המצורף להודעת דואר אלקטרוני זאת, אין לראות באמור בהודעה אלא משום > טיוטה לדיון, ואין להסתמך עליה לביצוע פעולה עסקית או משפטית כלשהי. > Please note that in accordance with Malam and/or its subsidiaries > (hereinafter : > "Malam") regulations and signatory rights, no offer, agreement, > concession or representation is binding on the Malam, unless > accompanied by a duly signed separate document (or a scanned version > thereof), affixed with the Malam seal. > > -- > For IBM-MAIN subscribe / signoff / archive access instructions, send > email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN > -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN לתשומת ליבך, בהתאם לנהלי חברת מלם מערכות בע"מ ו/או כל חברת בת ו/או חברה קשורה שלה (להלן : "החברה") וזכויות החתימה בהן, כל הצעה, התחייבות או מצג מטעם החברה, מחייבים מסמך נפרד וחתום על ידי מורשי החתימה של החברה, הנושא את לוגו החברה או שמה המודפס ובצירוף חותמת החברה. בהעדר מסמך כאמור (לרבות מסמך סרוק) המצורף להודעת דואר אלקטרוני זאת, אין לראות באמור בהודעה אלא משום טיוטה לדיון, ואין להסתמך עליה לביצוע פעולה עסקית או משפטית כלשהי. Please note that in accordance with Malam and/or its subsidiaries (hereinafter : "Malam") regulations and signatory rights, no offer, agreement, concession or representation is binding on the Malam, unless accompanied by a duly signed separate document (or a scanned version thereof), affixed with the Malam seal. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
IRA702I
Hi, We are getting message IRA702I when trying to change the Service Class of a job. This job was submitted by a TSO user. E N620SCR3,SRVCLASS=BATHI IRA702I RESET NOT VALID FOR N620SCR3. IT IS A SYSTEM-CONTROLLED ADDRESS SPACE How can we fix this? We are using z/OS v2.1 Thanks Gadi לתשומת ליבך, בהתאם לנהלי חברת מלם מערכות בע"מ ו/או כל חברת בת ו/או חברה קשורה שלה (להלן : "החברה") וזכויות החתימה בהן, כל הצעה, התחייבות או מצג מטעם החברה, מחייבים מסמך נפרד וחתום על ידי מורשי החתימה של החברה, הנושא את לוגו החברה או שמה המודפס ובצירוף חותמת החברה. בהעדר מסמך כאמור (לרבות מסמך סרוק) המצורף להודעת דואר אלקטרוני זאת, אין לראות באמור בהודעה אלא משום טיוטה לדיון, ואין להסתמך עליה לביצוע פעולה עסקית או משפטית כלשהי. Please note that in accordance with Malam and/or its subsidiaries (hereinafter : "Malam") regulations and signatory rights, no offer, agreement, concession or representation is binding on the Malam, unless accompanied by a duly signed separate document (or a scanned version thereof), affixed with the Malam seal. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: Ironstream over FTP
From what I saw (there are videos on youtube), it can capture SMF records as they are created, and then transfer them to a splunk indexer. The important part is 'as they are created', so that you see the information in splunk in real time. Gadi -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of Jake Anderson Sent: Wednesday, June 28, 2017 2:22 PM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: Ironstream over FTP Read the log ? On Jun 28, 2017 4:38 PM, "R.S." <r.skoru...@bremultibank.com.pl> wrote: W dniu 2017-06-28 o 12:53, גדי בן אבי pisze: From what I read, Irontream is a lot more than just transferring files. > Not so lot, but it is just different animal. Ironstream purpose is to transmit logs to remote server. So it has to READ the log in real time (IMHO this is the most important feature) and send it over a network. -- Radoslaw Skorupka Lodz, Poland == -- Treść tej wiadomości może zawierać informacje prawnie chronione Banku przeznaczone wyłącznie do użytku służbowego adresata. Odbiorcą może być jedynie jej adresat z wyłączeniem dostępu osób trzecich. Jeżeli nie jesteś adresatem niniejszej wiadomości lub pracownikiem upoważnionym do jej przekazania adresatowi, informujemy, że jej rozpowszechnianie, kopiowanie, rozprowadzanie lub inne działanie o podobnym charakterze jest prawnie zabronione i może być karalne. Jeżeli otrzymałeś tę wiadomość omyłkowo, prosimy niezwłocznie zawiadomić nadawcę wysyłając odpowiedź oraz trwale usunąć tę wiadomość włączając w to wszelkie jej kopie wydrukowane lub zapisane na dysku. This e-mail may contain legally privileged information of the Bank and is intended solely for business use of the addressee. This e-mail may only be received by the addressee and may not be disclosed to any third parties. If you are not the intended addressee of this e-mail or the employee authorized to forward it to the addressee, be advised that any dissemination, copying, distribution or any other similar activity is legally prohibited and may be punishable. If you received this e-mail by mistake please advise the sender immediately by using the reply facility in your e-mail software and delete permanently this e-mail including any copies of it either printed or saved to hard drive. mBank S.A. z siedzibą w Warszawie, ul. Senatorska 18, 00-950 Warszawa, www.mBank.pl, e-mail: kont...@mbank.plsąd Rejonowy dla m. st. Warszawy XII Wydział Gospodarczy Krajowego Rejestru Sądowego, nr rejestru przedsiębiorców KRS 025237, NIP: 526-021-50-88. Według stanu na dzień 01.01.2016 r. kapitał zakładowy mBanku S.A. (w całości wpłacony) wynosi 168.955.696 złotych. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN לתשומת ליבך, בהתאם לנהלי חברת מלם מערכות בע"מ ו/או כל חברת בת ו/או חברה קשורה שלה (להלן : "החברה") וזכויות החתימה בהן, כל הצעה, התחייבות או מצג מטעם החברה, מחייבים מסמך נפרד וחתום על ידי מורשי החתימה של החברה, הנושא את לוגו החברה או שמה המודפס ובצירוף חותמת החברה. בהעדר מסמך כאמור (לרבות מסמך סרוק) המצורף להודעת דואר אלקטרוני זאת, אין לראות באמור בהודעה אלא משום טיוטה לדיון, ואין להסתמך עליה לביצוע פעולה עסקית או משפטית כלשהי. Please note that in accordance with Malam and/or its subsidiaries (hereinafter : "Malam") regulations and signatory rights, no offer, agreement, concession or representation is binding on the Malam, unless accompanied by a duly signed separate document (or a scanned version thereof), affixed with the Malam seal. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: Ironstream over FTP
From what I read, Irontream is a lot more than just transferring files. Gadi -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of Jake Anderson Sent: Wednesday, June 28, 2017 1:38 PM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Ironstream over FTP Hi We have not bought ironstream but would like to know ironstream is different from FTP. Since using some Google search I just that it is easy to use without much of difficulty and securely sends the data. Generally I would like to know then difference. Regards Jake -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN לתשומת ליבך, בהתאם לנהלי חברת מלם מערכות בע"מ ו/או כל חברת בת ו/או חברה קשורה שלה (להלן : "החברה") וזכויות החתימה בהן, כל הצעה, התחייבות או מצג מטעם החברה, מחייבים מסמך נפרד וחתום על ידי מורשי החתימה של החברה, הנושא את לוגו החברה או שמה המודפס ובצירוף חותמת החברה. בהעדר מסמך כאמור (לרבות מסמך סרוק) המצורף להודעת דואר אלקטרוני זאת, אין לראות באמור בהודעה אלא משום טיוטה לדיון, ואין להסתמך עליה לביצוע פעולה עסקית או משפטית כלשהי. Please note that in accordance with Malam and/or its subsidiaries (hereinafter : "Malam") regulations and signatory rights, no offer, agreement, concession or representation is binding on the Malam, unless accompanied by a duly signed separate document (or a scanned version thereof), affixed with the Malam seal. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: Counting Tape mount requests
Thanks -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of Wheeler, Simon Sent: Monday, June 19, 2017 2:57 PM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: Counting Tape mount requests Hi Gadi, There's an IBM extract program called GFTAXTR which is part of the Volume Mount Analyser. It uses SMF records to report on tape mounts and drive usage. Google has a number of hits. thanks, Simon -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of ??? ?? ??? Sent: 19 June 2017 10:32 To: IBM-MAIN@LISTSERV.UA.EDU Subject: Counting Tape mount requests Hi, Is there any way to count tape mount requests? We are using z/OS v2.1. Our tape drives are 3590s. There is no automated library. Thanks Gadi לתשומת ליבך, בהתאם לנהלי חברת מלם מערכות בע"מ ו/או כל חברת בת ו/או חברה קשורה שלה (להלן : "החברה") וזכויות החתימה בהן, כל הצעה, התחייבות או מצג מטעם החברה, מחייבים מסמך נפרד וחתום על ידי מורשי החתימה של החברה, הנושא את לוגו החברה או שמה המודפס ובצירוף חותמת החברה. בהעדר מסמך כאמור (לרבות מסמך סרוק) המצורף להודעת דואר אלקטרוני זאת, אין לראות באמור בהודעה אלא משום טיוטה לדיון, ואין להסתמך עליה לביצוע פעולה עסקית או משפטית כלשהי. Please note that in accordance with Malam and/or its subsidiaries (hereinafter : "Malam") regulations and signatory rights, no offer, agreement, concession or representation is binding on the Malam, unless accompanied by a duly signed separate document (or a scanned version thereof), affixed with the Malam seal. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN ** The information in this E-Mail is confidential and may be legally privileged. It may not represent the views of the SSE Group. It is intended solely for the addressees. Access to this E-Mail by anyone else is unauthorised. If you are not the intended recipient, any disclosure, copying, distribution or any action taken or omitted to be taken in reliance on it, is prohibited and may be unlawful. Any unauthorised recipient should advise the sender immediately of the error in transmission. Unless specifically stated otherwise, this email (or any attachments to it) is not an offer capable of acceptance or acceptance of an offer and it does not form part of a binding contractual agreement. SSE plc Registered Office: Inveralmond House 200 Dunkeld Road Perth PH1 3AQ Registered in Scotland No. SC117119 Authorised and regulated by the Financial Conduct Authority for certain consumer credit activities. www.sse.com ** -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN לתשומת ליבך, בהתאם לנהלי חברת מלם מערכות בע"מ ו/או כל חברת בת ו/או חברה קשורה שלה (להלן : "החברה") וזכויות החתימה בהן, כל הצעה, התחייבות או מצג מטעם החברה, מחייבים מסמך נפרד וחתום על ידי מורשי החתימה של החברה, הנושא את לוגו החברה או שמה המודפס ובצירוף חותמת החברה. בהעדר מסמך כאמור (לרבות מסמך סרוק) המצורף להודעת דואר אלקטרוני זאת, אין לראות באמור בהודעה אלא משום טיוטה לדיון, ואין להסתמך עליה לביצוע פעולה עסקית או משפטית כלשהי. Please note that in accordance with Malam and/or its subsidiaries (hereinafter : "Malam") regulations and signatory rights, no offer, agreement, concession or representation is binding on the Malam, unless accompanied by a duly signed separate document (or a scanned version thereof), affixed with the Malam seal. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Counting Tape mount requests
Hi, Is there any way to count tape mount requests? We are using z/OS v2.1. Our tape drives are 3590s. There is no automated library. Thanks Gadi לתשומת ליבך, בהתאם לנהלי חברת מלם מערכות בע"מ ו/או כל חברת בת ו/או חברה קשורה שלה (להלן : "החברה") וזכויות החתימה בהן, כל הצעה, התחייבות או מצג מטעם החברה, מחייבים מסמך נפרד וחתום על ידי מורשי החתימה של החברה, הנושא את לוגו החברה או שמה המודפס ובצירוף חותמת החברה. בהעדר מסמך כאמור (לרבות מסמך סרוק) המצורף להודעת דואר אלקטרוני זאת, אין לראות באמור בהודעה אלא משום טיוטה לדיון, ואין להסתמך עליה לביצוע פעולה עסקית או משפטית כלשהי. Please note that in accordance with Malam and/or its subsidiaries (hereinafter : "Malam") regulations and signatory rights, no offer, agreement, concession or representation is binding on the Malam, unless accompanied by a duly signed separate document (or a scanned version thereof), affixed with the Malam seal. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: z/OS 2.3 preview announcement (mailto:)
There is a new NOTIFY JCL statement. It will allow you to send the notification to up to 8 addresses. -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of Elardus Engelbrecht Sent: Tuesday, May 23, 2017 3:24 PM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: z/OS 2.3 preview announcement (mailto:) Paul Gilmartin wrote: > o New support is added to SAF/RACF to convert a user ID to an email address > and vice versa. Will a RACF custom field be needed to be defined for the user profiles? I'm curious about this one. >Will there be an OMVS SYSCALL interface to this, or will the OMVS user >be required to issue SAF calls? The obvious technique would be to >enhance getpwuid(), > o JES2 job notification is enhanced to allow the specification of email in > addition to the existing NOTIFY support via local send. You can ask 1001 questions, but I'm more concerned how JES2 and CSMTP are improved to receive such notification. Also I'm wondering how the e-mails are going to look? I also want to have multiple persons to be notified about a job completion. If that is not possible, then it can be arranged that a group to be defined (at the receivers e-mail server) so multiple persons are notified with one single mail. >o The local part is case-sensitive and may contain special characters. >Apostrophes should mostly take care of this. >o EBCDIC code pages rear their ugly heads. I hate EBCDIC! CSMTP can do these translations from EBCDIC, but I'm also wondering. Let us wait until the planned availability date 29 September 2017... Groete / Greetings Elardus Engelbrecht -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN לתשומת ליבך, בהתאם לנהלי חברת מלם מערכות בע"מ ו/או כל חברת בת ו/או חברה קשורה שלה (להלן : "החברה") וזכויות החתימה בהן, כל הצעה, התחייבות או מצג מטעם החברה, מחייבים מסמך נפרד וחתום על ידי מורשי החתימה של החברה, הנושא את לוגו החברה או שמה המודפס ובצירוף חותמת החברה. בהעדר מסמך כאמור (לרבות מסמך סרוק) המצורף להודעת דואר אלקטרוני זאת, אין לראות באמור בהודעה אלא משום טיוטה לדיון, ואין להסתמך עליה לביצוע פעולה עסקית או משפטית כלשהי. Please note that in accordance with Malam and/or its subsidiaries (hereinafter : "Malam") regulations and signatory rights, no offer, agreement, concession or representation is binding on the Malam, unless accompanied by a duly signed separate document (or a scanned version thereof), affixed with the Malam seal. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: V XCF,xxxx,OFFLINE,REIPL not working
This APAR has been open for more than a year. Does anyone have any information about when a fix will be issued. Gadi From: IBM Mainframe Discussion Liston behalf of Jatinderpal S Virdi Sent: Sunday, April 9, 2017 16:14 To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: V XCF,,OFFLINE,REIPL not working Hello Gadi, Sounds like you are running into the situation described by APAR OA50533. The apar is still open. The situation arises in a BASE SYSPLEX, where the storage of one of the systems can be significantly larger than the other. The APAR contains more details: . ERROR DESCRIPTION: When using REIPL feature on VARY XCF command in a Base Sysplex (No CF) where one system is large compared to the other(s), the re-ipl may not be performed. In the reported case one system had 90 GB of real storage while the other had 18 GB. ANALYSIS: The Problem is related to Load Clear being used instead of Load Normal which can take consdierable more time on larger system. Because of how long the Load Clear takes, it's possible the RESET issued from the other system could arrive late, and disrupt the IPL that is in progress (the IPL due to REIPL). This causes the IPL to stall, and the system needs to be re-IPLed again KNOWN IMPACT: AUTOIPL is not performed. IPL is hung. VERIFICATION STEPS: Base Sysplex where systems differ greatly in size. LOCAL FIX: BYPASS/CIRCUMVENTION: Don't specify REIPL on the VARY XCF command and then do a manual IPL once the system has been RESET. Jatinderpal (Mickey) S. Virdi z/OS Software Support (XCF/XES/GRS) 2455 South Road Poughkeepsie, NY 12601 845-435-8118 T/L 8-295-8116 SUT: 720-349-9829 jvi...@us.ibm.com -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN לתשומת ליבך, בהתאם לנהלי חברת מלם מערכות בע"מ ו/או כל חברת בת ו/או חברה קשורה שלה (להלן : "החברה") וזכויות החתימה בהן, כל הצעה, התחייבות או מצג מטעם החברה, מחייבים מסמך נפרד וחתום על ידי מורשי החתימה של החברה, הנושא את לוגו החברה או שמה המודפס ובצירוף חותמת החברה. בהעדר מסמך כאמור (לרבות מסמך סרוק) המצורף להודעת דואר אלקטרוני זאת, אין לראות באמור בהודעה אלא משום טיוטה לדיון, ואין להסתמך עליה לביצוע פעולה עסקית או משפטית כלשהי. Please note that in accordance with Malam and/or its subsidiaries (hereinafter : "Malam") regulations and signatory rights, no offer, agreement, concession or representation is binding on the Malam, unless accompanied by a duly signed separate document (or a scanned version thereof), affixed with the Malam seal. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: V XCF,xxxx,OFFLINE,REIPL not working
Hi Lucas, Yes, AUTOIPL is coded in DIAGxx and when I issue D DIAG, I get the expected results. In hardware messages, I see: A program directed re-IPL has been initiated for partition CMP1 But no errors. Gadi -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of Lucas Rosalen Sent: Sunday, April 9, 2017 12:29 PM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: V XCF,,OFFLINE,REIPL not working Hi Gadi, Did you have AUTOIPL statements coded in the in-use DIAGxx member? Anything in Hardware Messages? Lucas On Apr 9, 2017 09:56, "גדי בן אבי" <gad...@malam.com> wrote: Hi, We IPL’s one of our systems last night and using the V XCF,,OFFLINE,REIPL to remove it from the Sysplex, and then REIPL it. The system was not reipl’d, and we had to IPL from the HMC. Can someone help me find out why this happened? We are running z/OS v2.1 on a z13s. The Sysplex has two systems, and they are connected using CTC’s. There is no coupling facility involved. Thanks Gadi לתשומת ליבך, בהתאם לנהלי חברת מלם מערכות בע"מ ו/או כל חברת בת ו/או חברה קשורה שלה (להלן : "החברה") וזכויות החתימה בהן, כל הצעה, התחייבות או מצג מטעם החברה, מחייבים מסמך נפרד וחתום על ידי מורשי החתימה של החברה, הנושא את לוגו החברה או שמה המודפס ובצירוף חותמת החברה. בהעדר מסמך כאמור (לרבות מסמך סרוק) המצורף להודעת דואר אלקטרוני זאת, אין לראות באמור בהודעה אלא משום טיוטה לדיון, ואין להסתמך עליה לביצוע פעולה עסקית או משפטית כלשהי. Please note that in accordance with Malam and/or its subsidiaries (hereinafter : "Malam") regulations and signatory rights, no offer, agreement, concession or representation is binding on the Malam, unless accompanied by a duly signed separate document (or a scanned version thereof), affixed with the Malam seal. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN לתשומת ליבך, בהתאם לנהלי חברת מלם מערכות בע"מ ו/או כל חברת בת ו/או חברה קשורה שלה (להלן : "החברה") וזכויות החתימה בהן, כל הצעה, התחייבות או מצג מטעם החברה, מחייבים מסמך נפרד וחתום על ידי מורשי החתימה של החברה, הנושא את לוגו החברה או שמה המודפס ובצירוף חותמת החברה. בהעדר מסמך כאמור (לרבות מסמך סרוק) המצורף להודעת דואר אלקטרוני זאת, אין לראות באמור בהודעה אלא משום טיוטה לדיון, ואין להסתמך עליה לביצוע פעולה עסקית או משפטית כלשהי. Please note that in accordance with Malam and/or its subsidiaries (hereinafter : "Malam") regulations and signatory rights, no offer, agreement, concession or representation is binding on the Malam, unless accompanied by a duly signed separate document (or a scanned version thereof), affixed with the Malam seal. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
V XCF,xxxx,OFFLINE,REIPL not working
Hi, We IPL’s one of our systems last night and using the V XCF,,OFFLINE,REIPL to remove it from the Sysplex, and then REIPL it. The system was not reipl’d, and we had to IPL from the HMC. Can someone help me find out why this happened? We are running z/OS v2.1 on a z13s. The Sysplex has two systems, and they are connected using CTC’s. There is no coupling facility involved. Thanks Gadi לתשומת ליבך, בהתאם לנהלי חברת מלם מערכות בע"מ ו/או כל חברת בת ו/או חברה קשורה שלה (להלן : "החברה") וזכויות החתימה בהן, כל הצעה, התחייבות או מצג מטעם החברה, מחייבים מסמך נפרד וחתום על ידי מורשי החתימה של החברה, הנושא את לוגו החברה או שמה המודפס ובצירוף חותמת החברה. בהעדר מסמך כאמור (לרבות מסמך סרוק) המצורף להודעת דואר אלקטרוני זאת, אין לראות באמור בהודעה אלא משום טיוטה לדיון, ואין להסתמך עליה לביצוע פעולה עסקית או משפטית כלשהי. Please note that in accordance with Malam and/or its subsidiaries (hereinafter : "Malam") regulations and signatory rights, no offer, agreement, concession or representation is binding on the Malam, unless accompanied by a duly signed separate document (or a scanned version thereof), affixed with the Malam seal. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: Need to extract IODF file into text formate
You can run a report from within the HCD dialog Check out option 3.1 Gadi -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of Shashi Kumar Sent: Wednesday, March 22, 2017 8:38 AM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Need to extract IODF file into text formate Hi All, I need to extract current IODF files as well as DR IODF in a text formate. How can I extract, Please need some help Thanks!!! -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN לתשומת ליבך, בהתאם לנהלי חברת מלם מערכות בע"מ ו/או כל חברת בת ו/או חברה קשורה שלה (להלן : "החברה") וזכויות החתימה בהן, כל הצעה, התחייבות או מצג מטעם החברה, מחייבים מסמך נפרד וחתום על ידי מורשי החתימה של החברה, הנושא את לוגו החברה או שמה המודפס ובצירוף חותמת החברה. בהעדר מסמך כאמור (לרבות מסמך סרוק) המצורף להודעת דואר אלקטרוני זאת, אין לראות באמור בהודעה אלא משום טיוטה לדיון, ואין להסתמך עליה לביצוע פעולה עסקית או משפטית כלשהי. Please note that in accordance with Malam and/or its subsidiaries (hereinafter : "Malam") regulations and signatory rights, no offer, agreement, concession or representation is binding on the Malam, unless accompanied by a duly signed separate document (or a scanned version thereof), affixed with the Malam seal. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: maximum numbers of z/OS V2.1 devices per Control Unit, FICON channel and CSS using z13s.
As far as I know, you can only define 256 device per control unit. Gadi -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of Arye Shemer Sent: Wednesday, February 22, 2017 11:01 AM To: IBM-MAIN@LISTSERV.UA.EDU Subject: maximum numbers of z/OS V2.1 devices per Control Unit, FICON channel and CSS using z13s. Hello z/OS experts, I need the maximum numbers of z/OS V2.1 devices per Control Unit, FICON channel and CSS using z13s. I tried to read in z/OS V2.1 and z13s books, but the information is scattered and not clear enough for me. It would be very helpful for if I could get a pointer to an IBM formal (redbook is good enough) table which describe this number. Thank you very much, Arye Shemer -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN לתשומת ליבך, בהתאם לנהלי חברת מלם מערכות בע"מ ו/או כל חברת בת ו/או חברה קשורה שלה (להלן : "החברה") וזכויות החתימה בהן, כל הצעה, התחייבות או מצג מטעם החברה, מחייבים מסמך נפרד וחתום על ידי מורשי החתימה של החברה, הנושא את לוגו החברה או שמה המודפס ובצירוף חותמת החברה. בהעדר מסמך כאמור (לרבות מסמך סרוק) המצורף להודעת דואר אלקטרוני זאת, אין לראות באמור בהודעה אלא משום טיוטה לדיון, ואין להסתמך עליה לביצוע פעולה עסקית או משפטית כלשהי. Please note that in accordance with Malam and/or its subsidiaries (hereinafter : "Malam") regulations and signatory rights, no offer, agreement, concession or representation is binding on the Malam, unless accompanied by a duly signed separate document (or a scanned version thereof), affixed with the Malam seal. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Hipersockets question
Hi, Our computer has 4 z/OS partitions and a zLinux partition. I defined a Hipersockets channel and made the appropriate definitions in TCP/IP. I can ping the all of the z/OS partitions from the z/OS partitions and from the zLinux partition I cannot ping the zLinux partition from the z/OS partition. I can ping the z/OS partitions from the zLinux partition. I cannot use FTP between the z/OS partitions and the zLinux partition. Can anyone help me solve this problem? Gadi לתשומת ליבך, בהתאם לנהלי חברת מלם מערכות בע"מ ו/או כל חברת בת ו/או חברה קשורה שלה (להלן : "החברה") וזכויות החתימה בהן, כל הצעה, התחייבות או מצג מטעם החברה, מחייבים מסמך נפרד וחתום על ידי מורשי החתימה של החברה, הנושא את לוגו החברה או שמה המודפס ובצירוף חותמת החברה. בהעדר מסמך כאמור (לרבות מסמך סרוק) המצורף להודעת דואר אלקטרוני זאת, אין לראות באמור בהודעה אלא משום טיוטה לדיון, ואין להסתמך עליה לביצוע פעולה עסקית או משפטית כלשהי. Please note that in accordance with Malam and/or its subsidiaries (hereinafter : "Malam") regulations and signatory rights, no offer, agreement, concession or representation is binding on the Malam, unless accompanied by a duly signed separate document (or a scanned version thereof), affixed with the Malam seal. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: Schedule LPAR weight change
Hi Tom, I did a little more digging. The option is only available when you are connected to the SE, either directly or using Single Object Operations. Gadi -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of Tom Mathias Sent: Wednesday, January 25, 2017 11:18 AM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: Schedule LPAR weight change Gadi, The Scheduled Operation should be there on your HMC. On your HMC, select the CPC that contains the LPAR(s) you want to change the weights on. Then run "Customize Scheduled Operations", which is under the "Operational Customization" group. When you have scheduled operations open, select "new" (to create a new scheduled operation). Select the "Change LPAR Controls" operation and select "OK". You should have three tabs: Date and Time, Repeat, and Options. The first two tabs come with every scheduled operation. The last one, "Options", is where you see something similar to Change LPAR Controls. This is where you set up the weights, etc., that you want the LPAR to switch to when the scheduled operation executes. Tom -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN לתשומת ליבך, בהתאם לנהלי חברת מלם מערכות בע"מ ו/או כל חברת בת ו/או חברה קשורה שלה (להלן : "החברה") וזכויות החתימה בהן, כל הצעה, התחייבות או מצג מטעם החברה, מחייבים מסמך נפרד וחתום על ידי מורשי החתימה של החברה, הנושא את לוגו החברה או שמה המודפס ובצירוף חותמת החברה. בהעדר מסמך כאמור (לרבות מסמך סרוק) המצורף להודעת דואר אלקטרוני זאת, אין לראות באמור בהודעה אלא משום טיוטה לדיון, ואין להסתמך עליה לביצוע פעולה עסקית או משפטית כלשהי. Please note that in accordance with Malam and/or its subsidiaries (hereinafter : "Malam") regulations and signatory rights, no offer, agreement, concession or representation is binding on the Malam, unless accompanied by a duly signed separate document (or a scanned version thereof), affixed with the Malam seal. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Schedule LPAR weight change
Hi, I am trying to schedule an LPAR weight change using the HMC scheduled operations. The manual suggests that this Is possible, but I don’t see the option when I try to create a new scheduled operation. I am trying under HMC user SYSPROG. Am I missing something? We are using a z13s. HMC version is 2.13.1. The LPARS are running z/OS v2.1. Thanks Gadi לתשומת ליבך, בהתאם לנהלי חברת מלם מערכות בע"מ ו/או כל חברת בת ו/או חברה קשורה שלה (להלן : "החברה") וזכויות החתימה בהן, כל הצעה, התחייבות או מצג מטעם החברה, מחייבים מסמך נפרד וחתום על ידי מורשי החתימה של החברה, הנושא את לוגו החברה או שמה המודפס ובצירוף חותמת החברה. בהעדר מסמך כאמור (לרבות מסמך סרוק) המצורף להודעת דואר אלקטרוני זאת, אין לראות באמור בהודעה אלא משום טיוטה לדיון, ואין להסתמך עליה לביצוע פעולה עסקית או משפטית כלשהי. Please note that in accordance with Malam and/or its subsidiaries (hereinafter : "Malam") regulations and signatory rights, no offer, agreement, concession or representation is binding on the Malam, unless accompanied by a duly signed separate document (or a scanned version thereof), affixed with the Malam seal. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: Convert Device and Link statements to Interface statements
Thanks It would have been nice if there was a tool to do this. -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of George Rodriguez Sent: Wednesday, January 11, 2017 2:16 PM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: Convert Device and Link statements to Interface statements I found this on the web: Converting to INTERFACE Statement <http://www-01.ibm.com/support/docview.wss?uid=tss1flash10744=1> *George Rodriguez* *Specialist II - IT Solutions* *IT Enterprise Applications* *PX - 47652* *(561) 357-7652 (office)* *(954) 415-7586 (mobile)* *School District of Palm Beach County* *3348 Forest Hill Blvd.* *Room B-251* *West Palm Beach, FL. 33406-5869* *Florida's Only A-Rated Urban District For Eight Consecutive Years* 2017-01-11 4:26 GMT-05:00 גדי בן אבי <gad...@malam.com>: > Hi, > > Does anyone know of a utility to convert TCP/IP Device and Link > statements to Interface statements? > > We are using z/OS v2.1 > > Thanks > > Gadi > > לתשומת ליבך, בהתאם לנהלי חברת מלם מערכות בע"מ ו/או כל חברת בת ו/או > חברה קשורה שלה (להלן : "החברה") וזכויות החתימה בהן, כל הצעה, התחייבות > או מצג מטעם החברה, מחייבים מסמך נפרד וחתום על ידי מורשי החתימה של > החברה, הנושא את לוגו החברה או שמה המודפס ובצירוף חותמת החברה. בהעדר > מסמך כאמור (לרבות מסמך > סרוק) המצורף להודעת דואר אלקטרוני זאת, אין לראות באמור בהודעה אלא משום > טיוטה לדיון, ואין להסתמך עליה לביצוע פעולה עסקית או משפטית כלשהי. > Please note that in accordance with Malam and/or its subsidiaries > (hereinafter : > "Malam") regulations and signatory rights, no offer, agreement, > concession or representation is binding on the Malam, unless > accompanied by a duly signed separate document (or a scanned version > thereof), affixed with the Malam seal. > > -- > For IBM-MAIN subscribe / signoff / archive access instructions, send > email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN > -- *Disclaimer: *Under Florida law, e-mail addresses are public records. If you do not want your e-mail address released in response to a public records request, do not send electronic mail to this entity. Instead, contact this office by phone or in writing. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN לתשומת ליבך, בהתאם לנהלי חברת מלם מערכות בע"מ ו/או כל חברת בת ו/או חברה קשורה שלה (להלן : "החברה") וזכויות החתימה בהן, כל הצעה, התחייבות או מצג מטעם החברה, מחייבים מסמך נפרד וחתום על ידי מורשי החתימה של החברה, הנושא את לוגו החברה או שמה המודפס ובצירוף חותמת החברה. בהעדר מסמך כאמור (לרבות מסמך סרוק) המצורף להודעת דואר אלקטרוני זאת, אין לראות באמור בהודעה אלא משום טיוטה לדיון, ואין להסתמך עליה לביצוע פעולה עסקית או משפטית כלשהי. Please note that in accordance with Malam and/or its subsidiaries (hereinafter : "Malam") regulations and signatory rights, no offer, agreement, concession or representation is binding on the Malam, unless accompanied by a duly signed separate document (or a scanned version thereof), affixed with the Malam seal. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Convert Device and Link statements to Interface statements
Hi, Does anyone know of a utility to convert TCP/IP Device and Link statements to Interface statements? We are using z/OS v2.1 Thanks Gadi לתשומת ליבך, בהתאם לנהלי חברת מלם מערכות בע"מ ו/או כל חברת בת ו/או חברה קשורה שלה (להלן : "החברה") וזכויות החתימה בהן, כל הצעה, התחייבות או מצג מטעם החברה, מחייבים מסמך נפרד וחתום על ידי מורשי החתימה של החברה, הנושא את לוגו החברה או שמה המודפס ובצירוף חותמת החברה. בהעדר מסמך כאמור (לרבות מסמך סרוק) המצורף להודעת דואר אלקטרוני זאת, אין לראות באמור בהודעה אלא משום טיוטה לדיון, ואין להסתמך עליה לביצוע פעולה עסקית או משפטית כלשהי. Please note that in accordance with Malam and/or its subsidiaries (hereinafter : "Malam") regulations and signatory rights, no offer, agreement, concession or representation is binding on the Malam, unless accompanied by a duly signed separate document (or a scanned version thereof), affixed with the Malam seal. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: SUPERPAV
In order to use SuperPav you need: The storage hardware to support it Some PTFS Code HYPERPAV=XPAV in IECIOSxx You define your Control Units the same way you would for HyperPAV. If you issue the D M=CU() command, you'll be able to see if a control unit supports SuperPAV, and what other control units can provide PAVs for the control unit. The D M=DEV() will show you if a device supports SuperPAV. We use it. This is the first time we had access to a storage subsystem that supported an kind of PAV, so we didn't have anything to compare it to. Gadi -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of Peter Sent: Monday, January 2, 2017 8:54 AM To: IBM-MAIN@LISTSERV.UA.EDU Subject: SUPERPAV Hi Does anyone has any experience in using superPAV ? How is the performance and is there any documentation to.enable the SUPERPAV ? How different it is from.HYPERPAV. Peter -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN לתשומת ליבך, בהתאם לנהלי חברת מלם מערכות בע"מ ו/או כל חברת בת ו/או חברה קשורה שלה (להלן : "החברה") וזכויות החתימה בהן, כל הצעה, התחייבות או מצג מטעם החברה, מחייבים מסמך נפרד וחתום על ידי מורשי החתימה של החברה, הנושא את לוגו החברה או שמה המודפס ובצירוף חותמת החברה. בהעדר מסמך כאמור (לרבות מסמך סרוק) המצורף להודעת דואר אלקטרוני זאת, אין לראות באמור בהודעה אלא משום טיוטה לדיון, ואין להסתמך עליה לביצוע פעולה עסקית או משפטית כלשהי. Please note that in accordance with Malam and/or its subsidiaries (hereinafter : "Malam") regulations and signatory rights, no offer, agreement, concession or representation is binding on the Malam, unless accompanied by a duly signed separate document (or a scanned version thereof), affixed with the Malam seal. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: Print issue
When you save your report, make sure the RECORD FORMAT is FBA or VBA Before you issue the get command, issue the command Quote site asatrans Then you can send the file to the printer Another option would be to load the file into word (if it's not too big) and change the carriage control characters to page breaks and other commands. Gadi -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of venkat kulkarni Sent: Thursday, December 29, 2016 10:15 AM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: Print issue Hello, I am using command prompt of window to connect FTP to mainframe to download report. Initially from sdsf I did xdc and put report in PS dataset and now transfer this PS dataset to windows using FTP command prompt of window. Can you please help me this specific command to be used to get report in proper format from mainframe to windows to print On Dec 29, 2016 11:08, "גדי בן אבי" <gad...@malam.com> wrote: > How are you transferring the file? > Are you using a pc based ftp client? Are you using the z/OS based > client (using TSO or a job)? > Make sure your file is defined as FBA or VBA. > > > > -Original Message- > From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] > On Behalf Of venkat kulkarni > Sent: Thursday, December 29, 2016 9:44 AM > To: IBM-MAIN@LISTSERV.UA.EDU > Subject: Re: Print issue > > Thanks for reply . Can you please help me doing this as it's new to me . > > Thanks alot > > On Dec 29, 2016 10:39, "גדי בן אבי" <gad...@malam.com> wrote: > > > You have to translate the mainframe page control characters (the > > ones in column 1) to something a pc printer will understand. > > There is an option in the z/OS ftp server to do this Use the command > > Quote site asatrans Before you transfer the file. > > > > > > > > -Original Message- > > From: IBM Mainframe Discussion List > > [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of venkat kulkarni > > Sent: Thursday, December 29, 2016 9:33 AM > > To: IBM-MAIN@LISTSERV.UA.EDU > > Subject: Print issue > > > > Hello Group, > > > > > > > > We are generating some report using Mainframe jobs and send to > > printer > for > > print. But printer which is attached to mainframe is not working > > becuase > of > > hardware issue and we trying to fix but > > > > at the same time we need to print those business report. > > > > > > > > I tried to xdc those report from sdsf and then ftp dataset to > > desktop to take print in asci format. But while taking print, report > > doesnt come in proper format and page breaks etc. > > > > > > > > Do we have any work around to solve this problem till we get printer > > repaired. > > > > > > > > > > > > Regards > > > > > > -- For IBM-MAIN subscribe / signoff / archive access instructions, > > send > email > > to lists...@listserv.ua.edu with the message: INFO IBM-MAIN לתשומת > > ליבך, בהתאם לנהלי חברת מלם מערכות בע"מ ו/או כל חברת בת ו/או חברה > > קשורה שלה (להלן : "החברה") וזכויות החתימה בהן, כל הצעה, התחייבות או > > מצג מטעם החברה, מחייבים מסמך נפרד וחתום על ידי מורשי החתימה של > > החברה, הנושא > את > > לוגו החברה או שמה המודפס ובצירוף חותמת החברה. בהעדר מסמך כאמור > > (לרבות > מסמך > > סרוק) המצורף להודעת דואר אלקטרוני זאת, אין לראות באמור בהודעה אלא > > משום טיוטה לדיון, ואין להסתמך עליה לביצוע פעולה עסקית או משפטית > > כלשהי. Please note that in accordance with Malam and/or its subsidiaries > > (hereinafter : > > "Malam") regulations and signatory rights, no offer, agreement, > concession > > or representation is binding on the Malam, unless accompanied by a > > duly signed separate document (or a scanned version thereof), > > affixed with the Malam seal. > > > > > > -- For IBM-MAIN subscribe / signoff / archive access instructions, > > send email to lists...@listserv.ua.edu with the message: INFO > > IBM-MAIN > > > > -- > For IBM-MAIN subscribe / signoff / archive access instructions, send > email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN > לתשומת ליבך, בהתאם לנהלי חברת מלם מערכות בע"מ ו/או כל חברת בת ו/או > חברה קשורה שלה (להלן : "החברה") וזכויות החתימה בהן, כל הצעה, התחייבות > או מצג מטעם החברה, מחייבים מסמך נפרד וחתום על ידי מורש
Re: Print issue
How are you transferring the file? Are you using a pc based ftp client? Are you using the z/OS based client (using TSO or a job)? Make sure your file is defined as FBA or VBA. -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of venkat kulkarni Sent: Thursday, December 29, 2016 9:44 AM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: Print issue Thanks for reply . Can you please help me doing this as it's new to me . Thanks alot On Dec 29, 2016 10:39, "גדי בן אבי" <gad...@malam.com> wrote: > You have to translate the mainframe page control characters (the ones > in column 1) to something a pc printer will understand. > There is an option in the z/OS ftp server to do this Use the command > Quote site asatrans Before you transfer the file. > > > > -Original Message- > From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On > Behalf Of venkat kulkarni > Sent: Thursday, December 29, 2016 9:33 AM > To: IBM-MAIN@LISTSERV.UA.EDU > Subject: Print issue > > Hello Group, > > > > We are generating some report using Mainframe jobs and send to printer for > print. But printer which is attached to mainframe is not working becuase of > hardware issue and we trying to fix but > > at the same time we need to print those business report. > > > > I tried to xdc those report from sdsf and then ftp dataset to desktop to > take print in asci format. But while taking print, report doesnt come in > proper format and page breaks etc. > > > > Do we have any work around to solve this problem till we get printer > repaired. > > > > > > Regards > > -- > For IBM-MAIN subscribe / signoff / archive access instructions, send email > to lists...@listserv.ua.edu with the message: INFO IBM-MAIN > לתשומת ליבך, בהתאם לנהלי חברת מלם מערכות בע"מ ו/או כל חברת בת ו/או חברה > קשורה שלה (להלן : "החברה") וזכויות החתימה בהן, כל הצעה, התחייבות או מצג > מטעם החברה, מחייבים מסמך נפרד וחתום על ידי מורשי החתימה של החברה, הנושא את > לוגו החברה או שמה המודפס ובצירוף חותמת החברה. בהעדר מסמך כאמור (לרבות מסמך > סרוק) המצורף להודעת דואר אלקטרוני זאת, אין לראות באמור בהודעה אלא משום > טיוטה לדיון, ואין להסתמך עליה לביצוע פעולה עסקית או משפטית כלשהי. Please > note that in accordance with Malam and/or its subsidiaries (hereinafter : > "Malam") regulations and signatory rights, no offer, agreement, concession > or representation is binding on the Malam, unless accompanied by a duly > signed separate document (or a scanned version thereof), affixed with the > Malam seal. > > -- > For IBM-MAIN subscribe / signoff / archive access instructions, > send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN > -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN לתשומת ליבך, בהתאם לנהלי חברת מלם מערכות בע"מ ו/או כל חברת בת ו/או חברה קשורה שלה (להלן : "החברה") וזכויות החתימה בהן, כל הצעה, התחייבות או מצג מטעם החברה, מחייבים מסמך נפרד וחתום על ידי מורשי החתימה של החברה, הנושא את לוגו החברה או שמה המודפס ובצירוף חותמת החברה. בהעדר מסמך כאמור (לרבות מסמך סרוק) המצורף להודעת דואר אלקטרוני זאת, אין לראות באמור בהודעה אלא משום טיוטה לדיון, ואין להסתמך עליה לביצוע פעולה עסקית או משפטית כלשהי. Please note that in accordance with Malam and/or its subsidiaries (hereinafter : "Malam") regulations and signatory rights, no offer, agreement, concession or representation is binding on the Malam, unless accompanied by a duly signed separate document (or a scanned version thereof), affixed with the Malam seal. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: Print issue
You have to translate the mainframe page control characters (the ones in column 1) to something a pc printer will understand. There is an option in the z/OS ftp server to do this Use the command Quote site asatrans Before you transfer the file. -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of venkat kulkarni Sent: Thursday, December 29, 2016 9:33 AM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Print issue Hello Group, We are generating some report using Mainframe jobs and send to printer for print. But printer which is attached to mainframe is not working becuase of hardware issue and we trying to fix but at the same time we need to print those business report. I tried to xdc those report from sdsf and then ftp dataset to desktop to take print in asci format. But while taking print, report doesnt come in proper format and page breaks etc. Do we have any work around to solve this problem till we get printer repaired. Regards -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN לתשומת ליבך, בהתאם לנהלי חברת מלם מערכות בע"מ ו/או כל חברת בת ו/או חברה קשורה שלה (להלן : "החברה") וזכויות החתימה בהן, כל הצעה, התחייבות או מצג מטעם החברה, מחייבים מסמך נפרד וחתום על ידי מורשי החתימה של החברה, הנושא את לוגו החברה או שמה המודפס ובצירוף חותמת החברה. בהעדר מסמך כאמור (לרבות מסמך סרוק) המצורף להודעת דואר אלקטרוני זאת, אין לראות באמור בהודעה אלא משום טיוטה לדיון, ואין להסתמך עליה לביצוע פעולה עסקית או משפטית כלשהי. Please note that in accordance with Malam and/or its subsidiaries (hereinafter : "Malam") regulations and signatory rights, no offer, agreement, concession or representation is binding on the Malam, unless accompanied by a duly signed separate document (or a scanned version thereof), affixed with the Malam seal. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: DB2 DDF startup problem
The problem was that port 446 was reserved to another started task in the TCP/IP Profile. I found this by issuing the command BPXMTEXT 744C7246 which gave me: JRPortAccessAuth: User does not have authority to access this port. This gave me a direction, and I check the TCP/IP Profile. Gadi -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of Itschak Mugzach Sent: Monday, December 5, 2016 2:27 PM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: DB2 DDF startup problem 1xx Explanation An attempt to obtain virtual storage for the MVPCOMM (common) table using the GETMAIN macro interface was unsuccessful. The xx portion of the completion code is the GETMAIN return code. System action The system terminates the task. Operator response Tell the system programmer about the error. System programmer response Increase the region size in the catalogued procedure used to start the task. If region size is not the problem, gather all available documentation, and report the error to the IBM® Software Support Center. Module MVPMAIN Destination mainline code ITSchak ITschak Mugzach Z/OS, ISV Products and Application Security & Risk Assessments Professional 2016-12-05 14:21 GMT+02:00 גדי בן אבי <gad...@malam.com>: > Hi, > When I start DB2 DDF, I get this message: > DSNL515I -DSN1 DSNLILNR TCP/IP BIND FAILED FOR PORT > 446 WITH RETURN CODE=111 AND REASON CODE=744C7246 > > Does anyone know what the meaning of the return and reason codes are, > or where I can find them. > > Thanks > > Gadi > > לתשומת ליבך, בהתאם לנהלי חברת מלם מערכות בע"מ ו/או כל חברת בת ו/או > חברה קשורה שלה (להלן : "החברה") וזכויות החתימה בהן, כל הצעה, התחייבות > או מצג מטעם החברה, מחייבים מסמך נפרד וחתום על ידי מורשי החתימה של > החברה, הנושא את לוגו החברה או שמה המודפס ובצירוף חותמת החברה. בהעדר > מסמך כאמור (לרבות מסמך > סרוק) המצורף להודעת דואר אלקטרוני זאת, אין לראות באמור בהודעה אלא משום > טיוטה לדיון, ואין להסתמך עליה לביצוע פעולה עסקית או משפטית כלשהי. > Please note that in accordance with Malam and/or its subsidiaries > (hereinafter : > "Malam") regulations and signatory rights, no offer, agreement, > concession or representation is binding on the Malam, unless > accompanied by a duly signed separate document (or a scanned version > thereof), affixed with the Malam seal. > > -- > For IBM-MAIN subscribe / signoff / archive access instructions, send > email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN > -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN לתשומת ליבך, בהתאם לנהלי חברת מלם מערכות בע"מ ו/או כל חברת בת ו/או חברה קשורה שלה (להלן : "החברה") וזכויות החתימה בהן, כל הצעה, התחייבות או מצג מטעם החברה, מחייבים מסמך נפרד וחתום על ידי מורשי החתימה של החברה, הנושא את לוגו החברה או שמה המודפס ובצירוף חותמת החברה. בהעדר מסמך כאמור (לרבות מסמך סרוק) המצורף להודעת דואר אלקטרוני זאת, אין לראות באמור בהודעה אלא משום טיוטה לדיון, ואין להסתמך עליה לביצוע פעולה עסקית או משפטית כלשהי. Please note that in accordance with Malam and/or its subsidiaries (hereinafter : "Malam") regulations and signatory rights, no offer, agreement, concession or representation is binding on the Malam, unless accompanied by a duly signed separate document (or a scanned version thereof), affixed with the Malam seal. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
DB2 DDF startup problem
Hi, When I start DB2 DDF, I get this message: DSNL515I -DSN1 DSNLILNR TCP/IP BIND FAILED FOR PORT 446 WITH RETURN CODE=111 AND REASON CODE=744C7246 Does anyone know what the meaning of the return and reason codes are, or where I can find them. Thanks Gadi לתשומת ליבך, בהתאם לנהלי חברת מלם מערכות בע"מ ו/או כל חברת בת ו/או חברה קשורה שלה (להלן : "החברה") וזכויות החתימה בהן, כל הצעה, התחייבות או מצג מטעם החברה, מחייבים מסמך נפרד וחתום על ידי מורשי החתימה של החברה, הנושא את לוגו החברה או שמה המודפס ובצירוף חותמת החברה. בהעדר מסמך כאמור (לרבות מסמך סרוק) המצורף להודעת דואר אלקטרוני זאת, אין לראות באמור בהודעה אלא משום טיוטה לדיון, ואין להסתמך עליה לביצוע פעולה עסקית או משפטית כלשהי. Please note that in accordance with Malam and/or its subsidiaries (hereinafter : "Malam") regulations and signatory rights, no offer, agreement, concession or representation is binding on the Malam, unless accompanied by a duly signed separate document (or a scanned version thereof), affixed with the Malam seal. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: IZUSEC job
Hi, I looked in sys1.samplib. It wasn't there. I did find many APAR entries, so I am no in the process of installing those APARs. One of them installs IZUSEC and IZUMKFS into SIZUJCL, so hopefully, my problems will be solved. Gadi -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of Lizette Koehler Sent: Wednesday, November 23, 2016 3:21 PM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: IZUSEC job Just a couple of observations 1) Was a search on www.ibm.com done? When a search is done for just IZUSEC it comes up with the following URL (watch the wrap) http://www.ibm.com/support/knowledgecenter/SSLTBW_2.2.0/com.ibm.zos.v2r2.izua300 /izuconfig_ConfigProcessOverview.htm This states it is in SYS1.SAMPLIB.. 2) Was a search done in IBM Link? Check all fixes to make sure you are current for z/OSMF. When a search is done, the following fixes are displayed under program products. You would need to verify your products level in z/OS (V2.1 or V2.2). PI44092 PER 9/2/15 Z/OSMF FIXES. PI46099 DOC 3/24/16 Z/OSMF V2R2 DOCUMENTATION UPDATES PI54286 UR1 2/24/16 NEW FUNCTION - Z/OSMF FUNCTION ENHANCEMENTS.This is the one for IEZUSEC PI56641 UR1 4/5/16 NEW FUNCTION - Z/OSMF WORKFLOW SECURITY CONFIGURATION SUPPORT. PI57136 UR1 9/7/16 NEW FUNCTION - NOTIFICATION FRAMEWORK EMAIL AND Mobile SUPPORT. PI58137 9/2/16 Z/OSMF SSL IMPROVEMENTS - SHA 256 & TLSv1_2 PI58388 UR1 7/4/16 NEW FUNCTION - Z/OSMF CONFIGURATION WORKFLOW ENHANCEMENT. PI59489 UR1 6/2/16 NEW FUNCTION - NOTIFICATION FRAMEWORK EMAIL AND Mobile SUPPORT. PI62771 PER 9/2/16 IZUG851E ISSUED WHEN ADDING ASSIGNEE TO A WORKFLOW DESPITE BEING PI63518 PER 9/2/16 ZOSMF SERVER ACCESS TO PROFILE CSFKTB NOT NEEDED FOR HARDWARE PI66551 PER 9/2/16 CONFIGURATION WORKFLOW ENHANCEMENT APAR PI58388 DOES NOT PI66824 UR1 10/3/16 NEW FUNCTION - Z/OSMF FUNCTION ENHANCEMENTS. PI69100 UR1 11/10/16 NEW FUNCTION - Z/OSMF FUNCTION ENHANCEMENTS. PI70521 UR1 11/23/16 NEW FUNCTION - Z/OSMF FUNCTION ENHANCEMENTS. PI70526 UR1 11/23/16 NEW FUNCTION - Z/OSMF CLOUD PROVISIONING ENHANCEMENTS. It is possible that these two searches would have provided the guidance needed to get the information requested. Note: Always receive all of your HOLDATAT and SMP/E Fixes often. That way you will not be missing fixes, just need to apply them when needed. It looks like you may need to apply more fixes before getting z/OSMF up. Lizette > -Original Message- > From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] > On Behalf Of ??? ?? ??? > Sent: Tuesday, November 22, 2016 11:06 PM > To: IBM-MAIN@LISTSERV.UA.EDU > Subject: IZUSEC job > > Hi, > I am trying to configure z/OSMF for the first time. > I can’t find the IZUSEC job that created the security definitions for z/OSMF. > z/OSMF was installed as part of z/OS using ServerPac. > z/OS and z/OSMF are v2.1 > > Gadi > > לתשומת ליבך, בהתאם לנהלי חברת מלם מערכות בע"מ ו/או כל חברת בת ו/או > חברה קשורה שלה (להלן : "החברה") וזכויות החתימה בהן, כל הצעה, התחייבות > או מצג מטעם החברה, מחייבים מסמך נפרד וחתום על ידי מורשי החתימה של > החברה, הנושא את לוגו החברה או שמה המודפס ובצירוף חותמת החברה. בהעדר > מסמך כאמור (לרבות מסמך סרוק) המצורף להודעת דואר אלקטרוני זאת, אין > לראות באמור בהודעה אלא משום טיוטה לדיון, ואין להסתמך עליה לביצוע פעולה > עסקית או משפטית כלשהי. Please note that in accordance with Malam > and/or its subsidiaries (hereinafter : "Malam") regulations and > signatory rights, no offer, agreement, concession or representation is > binding on the Malam, unless accompanied by a duly signed separate document > (or a scanned version thereof), affixed with the Malam seal. > > -- > For IBM-MAIN subscribe / signoff / archive access instructions, send > email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN לתשומת ליבך, בהתאם לנהלי חברת מלם מערכות בע"מ ו/או כל חברת בת ו/או חברה קשורה שלה (להלן : "החברה") וזכויות החתימה בהן, כל הצעה, התחייבות או מצג מטעם החברה, מחייבים מסמך נפרד וחתום על ידי מורשי החתימה של החברה, הנושא את לוגו החברה או שמה המודפס ובצירוף חותמת החברה. בהעדר מסמך כאמור (לרבות מסמך סרוק) המצורף להודעת דואר אלקטרוני זאת, אין לראות באמור בהודעה אלא משום טיוטה לדיון, ואין להסתמך עליה לביצוע פעולה עסקית או משפטית כלשהי. Please note that in accordance with Malam and/or its subsidiaries (hereinafter : "Malam") regulations and signatory rights, no offer, agreement, concession or representation is binding on the Malam, unless accompanied by a duly signed separate document (or a scanned version thereof), affixed with the Malam seal. -- For IBM-MAIN subscribe / signoff / archive
Re: IZUSEC job
No, But I'm working on it -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of Avelino Ferreira Sent: Wednesday, November 23, 2016 1:50 PM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: IZUSEC job Do you have UI90034 installed? -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of ??? ?? ??? Sent: Wednesday, November 23, 2016 9:47 AM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: IZUSEC job It's not there :-( -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of Avelino Ferreira Sent: Wednesday, November 23, 2016 1:45 PM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: IZUSEC job Try checking on the product library. In my case here it is SYS1.ZOSMF.SIZUJCL. -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of Richards, Robert B. Sent: Wednesday, November 23, 2016 9:18 AM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: IZUSEC job I am at z/OS 2.2 and they are there. Did I miss the fact that you are at 2.1? -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of ??? ?? ??? Sent: Wednesday, November 23, 2016 6:16 AM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: IZUSEC job Thanks Bob, I've looked there already. It's not there. Gadi -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of Richards, Robert B. Sent: Wednesday, November 23, 2016 1:14 PM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: IZUSEC job Gadi, Try looking in: SYS1.SAMPLIB(IZUSEC) or SYS1.SAMPLIB(IZUWMSEC) or SYS1.SAMPLIB(IZURMSEC) Bob -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of ??? ?? ??? Sent: Wednesday, November 23, 2016 3:52 AM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: IZUSEC job Unfortunately, the serverpac job and files have gone to the bit bucket in the sky. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN לתשומת ליבך, בהתאם לנהלי חברת מלם מערכות בע"מ ו/או כל חברת בת ו/או חברה קשורה שלה (להלן : "החברה") וזכויות החתימה בהן, כל הצעה, התחייבות או מצג מטעם החברה, מחייבים מסמך נפרד וחתום על ידי מורשי החתימה של החברה, הנושא את לוגו החברה או שמה המודפס ובצירוף חותמת החברה. בהעדר מסמך כאמור (לרבות מסמך סרוק) המצורף להודעת דואר אלקטרוני זאת, אין לראות באמור בהודעה אלא משום טיוטה לדיון, ואין להסתמך עליה לביצוע פעולה עסקית או משפטית כלשהי. Please note that in accordance with Malam and/or its subsidiaries (hereinafter : "Malam") regulations and signatory rights, no offer, agreement, concession or representation is binding on the Malam, unless accompanied by a duly signed separate document (or a scanned version thereof), affixed with the Malam seal. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN --- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN לתשומת ליבך, בהתאם לנהלי חברת מלם מערכות בע"מ ו/או כל חברת בת ו/או חברה קשורה שלה (להלן : "החברה") וזכויות החתימה בהן, כל הצעה, התחייבות או מצג מטעם החברה, מחייבים מסמך נפרד וחתום על ידי מורשי החתימה של החברה, הנושא את לוגו החברה או שמה המודפס ובצירוף חותמת החברה. בהעדר מסמך כאמור (לרבות מסמך סרוק) המצורף להודעת דואר אלקטרוני זאת, אין לראות באמור בהודעה אלא משום טיוטה לדיון, ואין להסתמך עליה לביצוע פעולה עסקית או משפטית כלשהי. Please note that in accordance with Malam and/or its subsidiaries (hereinafter : "Malam") regulations and signatory rights, no offer, agreement, concession or representation is binding on the Malam, unless accompanied by a duly signed separate document (or a scanned version thereof), affixed with the Malam seal. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN --- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with
Re: IZUSEC job
It's not there :-( -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of Avelino Ferreira Sent: Wednesday, November 23, 2016 1:45 PM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: IZUSEC job Try checking on the product library. In my case here it is SYS1.ZOSMF.SIZUJCL. -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of Richards, Robert B. Sent: Wednesday, November 23, 2016 9:18 AM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: IZUSEC job I am at z/OS 2.2 and they are there. Did I miss the fact that you are at 2.1? -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of ??? ?? ??? Sent: Wednesday, November 23, 2016 6:16 AM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: IZUSEC job Thanks Bob, I've looked there already. It's not there. Gadi -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of Richards, Robert B. Sent: Wednesday, November 23, 2016 1:14 PM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: IZUSEC job Gadi, Try looking in: SYS1.SAMPLIB(IZUSEC) or SYS1.SAMPLIB(IZUWMSEC) or SYS1.SAMPLIB(IZURMSEC) Bob -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of ??? ?? ??? Sent: Wednesday, November 23, 2016 3:52 AM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: IZUSEC job Unfortunately, the serverpac job and files have gone to the bit bucket in the sky. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN לתשומת ליבך, בהתאם לנהלי חברת מלם מערכות בע"מ ו/או כל חברת בת ו/או חברה קשורה שלה (להלן : "החברה") וזכויות החתימה בהן, כל הצעה, התחייבות או מצג מטעם החברה, מחייבים מסמך נפרד וחתום על ידי מורשי החתימה של החברה, הנושא את לוגו החברה או שמה המודפס ובצירוף חותמת החברה. בהעדר מסמך כאמור (לרבות מסמך סרוק) המצורף להודעת דואר אלקטרוני זאת, אין לראות באמור בהודעה אלא משום טיוטה לדיון, ואין להסתמך עליה לביצוע פעולה עסקית או משפטית כלשהי. Please note that in accordance with Malam and/or its subsidiaries (hereinafter : "Malam") regulations and signatory rights, no offer, agreement, concession or representation is binding on the Malam, unless accompanied by a duly signed separate document (or a scanned version thereof), affixed with the Malam seal. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN --- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN לתשומת ליבך, בהתאם לנהלי חברת מלם מערכות בע"מ ו/או כל חברת בת ו/או חברה קשורה שלה (להלן : "החברה") וזכויות החתימה בהן, כל הצעה, התחייבות או מצג מטעם החברה, מחייבים מסמך נפרד וחתום על ידי מורשי החתימה של החברה, הנושא את לוגו החברה או שמה המודפס ובצירוף חותמת החברה. בהעדר מסמך כאמור (לרבות מסמך סרוק) המצורף להודעת דואר אלקטרוני זאת, אין לראות באמור בהודעה אלא משום טיוטה לדיון, ואין להסתמך עליה לביצוע פעולה עסקית או משפטית כלשהי. Please note that in accordance with Malam and/or its subsidiaries (hereinafter : "Malam") regulations and signatory rights, no offer, agreement, concession or representation is binding on the Malam, unless accompanied by a duly signed separate document (or a scanned version thereof), affixed with the Malam seal. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: IZUSEC job
I searched in /usr/lpp/zosmf/V2R1 and didn't find anything. -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of Elardus Engelbrecht Sent: Wednesday, November 23, 2016 1:31 PM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: IZUSEC job Richards, Robert B. wrote: >Did I miss the fact that you are at 2.1? Gadi said in his first post that his z/OS and z/OSMF are both on 2.1. Gadi wrote: >I've looked there already. It's not there. I have also looked around in my sandbox. I don't know how you received it these files first time, but I think it is somewhere in one of your OMVS datasets. Perhaps you need to unpack somehow to get your datasets containing those IZU*SEC jobs. Perhaps look around in 'usr/lpp/zosmf/V2R1' or something like that... You can always ask IBM for a new copy. ;-) Groete / Greetings Elardus Engelbrecht -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN לתשומת ליבך, בהתאם לנהלי חברת מלם מערכות בע"מ ו/או כל חברת בת ו/או חברה קשורה שלה (להלן : "החברה") וזכויות החתימה בהן, כל הצעה, התחייבות או מצג מטעם החברה, מחייבים מסמך נפרד וחתום על ידי מורשי החתימה של החברה, הנושא את לוגו החברה או שמה המודפס ובצירוף חותמת החברה. בהעדר מסמך כאמור (לרבות מסמך סרוק) המצורף להודעת דואר אלקטרוני זאת, אין לראות באמור בהודעה אלא משום טיוטה לדיון, ואין להסתמך עליה לביצוע פעולה עסקית או משפטית כלשהי. Please note that in accordance with Malam and/or its subsidiaries (hereinafter : "Malam") regulations and signatory rights, no offer, agreement, concession or representation is binding on the Malam, unless accompanied by a duly signed separate document (or a scanned version thereof), affixed with the Malam seal. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: IZUSEC job
Thanks Bob, I've looked there already. It's not there. Gadi -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of Richards, Robert B. Sent: Wednesday, November 23, 2016 1:14 PM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: IZUSEC job Gadi, Try looking in: SYS1.SAMPLIB(IZUSEC) or SYS1.SAMPLIB(IZUWMSEC) or SYS1.SAMPLIB(IZURMSEC) Bob -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of ??? ?? ??? Sent: Wednesday, November 23, 2016 3:52 AM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: IZUSEC job Unfortunately, the serverpac job and files have gone to the bit bucket in the sky. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN לתשומת ליבך, בהתאם לנהלי חברת מלם מערכות בע"מ ו/או כל חברת בת ו/או חברה קשורה שלה (להלן : "החברה") וזכויות החתימה בהן, כל הצעה, התחייבות או מצג מטעם החברה, מחייבים מסמך נפרד וחתום על ידי מורשי החתימה של החברה, הנושא את לוגו החברה או שמה המודפס ובצירוף חותמת החברה. בהעדר מסמך כאמור (לרבות מסמך סרוק) המצורף להודעת דואר אלקטרוני זאת, אין לראות באמור בהודעה אלא משום טיוטה לדיון, ואין להסתמך עליה לביצוע פעולה עסקית או משפטית כלשהי. Please note that in accordance with Malam and/or its subsidiaries (hereinafter : "Malam") regulations and signatory rights, no offer, agreement, concession or representation is binding on the Malam, unless accompanied by a duly signed separate document (or a scanned version thereof), affixed with the Malam seal. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: IZUSEC job
Unfortunately, the serverpac job and files have gone to the bit bucket in the sky. -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of Gibney, Dave Sent: Wednesday, November 23, 2016 10:46 AM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: IZUSEC job Just a guess, but is it one of the Severpac jobs? Look via the dialog > -Original Message- > From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] > On Behalf Of ??? ?? ??? > Sent: Tuesday, November 22, 2016 11:28 PM > To: IBM-MAIN@LISTSERV.UA.EDU > Subject: Re: IZUSEC job > > SMP/E doesn't have an object type called JOB or JCL. > SRC didn't find anthing. > Gadi > > -Original Message- > From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] > On Behalf Of Itschak Mugzach > Sent: Wednesday, November 23, 2016 9:17 AM > To: IBM-MAIN@LISTSERV.UA.EDU > Subject: Re: IZUSEC job > > Gadi. > Ask smp. If there a job with this name, smp kow it. > > Itschak > > בתאריך 23 בנוב 2016 09:14, "גדי בן אבי" <gad...@malam.com> כתב: > > > I looked in SIZUJCL. > > It's not there :-( > > Gadi > > > > -Original Message- > > From: IBM Mainframe Discussion List [mailto:IBM- > m...@listserv.ua.edu] > > On Behalf Of Elardus Engelbrecht > > Sent: Wednesday, November 23, 2016 8:57 AM > > To: IBM-MAIN@LISTSERV.UA.EDU > > Subject: Re: IZUSEC job > > > > GADI wrote: > > > > >I am trying to configure z/OSMF for the first time. > > > > Good luck. This is a horrible, but managable task. Easier thatn > > OMEGAMON of course... ;-) > > > > > > >I can't find the IZUSEC job that created the security definitions > > >for > > z/OSMF. > > > > IBM should have given you a copy of dataset IZU.SIZUJCL which > > contains that and other members. This is the same dataset where you > > find the jobs to create + populate zHFS datasets amongst other things. > > > > About security, there are a good handful of IZU*SEC jobs waiting for you. > > > > > > >z/OSMF was installed as part of z/OS using ServerPac. z/OS and > > >z/OSMF are v2.1 > > > > Groete / Greetings > > Elardus Engelbrecht > > > > > > -- For IBM-MAIN subscribe / signoff / archive access instructions, > > send email to lists...@listserv.ua.edu with the message: INFO > > IBM-MAIN לתשומת ליבך, בהתאם לנהלי חברת מלם מערכות בע"מ ו/או כל חברת > > בת ו/או חברה קשורה שלה (להלן : "החברה") וזכויות החתימה בהן, כל הצעה, > התחייבות > > או מצג מטעם החברה, מחייבים מסמך נפרד וחתום על ידי מורשי החתימה של > > החברה, הנושא את לוגו החברה או שמה המודפס ובצירוף חותמת החברה. > בהעדר > > מסמך כאמור (לרבות מסמך > > סרוק) המצורף להודעת דואר אלקטרוני זאת, אין לראות באמור בהודעה > אלא משום > > טיוטה לדיון, ואין להסתמך עליה לביצוע פעולה עסקית או משפטית > כלשהי. > > Please note that in accordance with Malam and/or its subsidiaries > (hereinafter : > > "Malam") regulations and signatory rights, no offer, agreement, > > concession or representation is binding on the Malam, unless > > accompanied by a duly signed separate document (or a scanned version > > thereof), affixed with the Malam seal. > > > > > > -- For IBM-MAIN subscribe / signoff / archive access instructions, > > send email to lists...@listserv.ua.edu with the message: INFO > > IBM-MAIN > > > > -- > For IBM-MAIN subscribe / signoff / archive access instructions, send > email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN > לתשומת ליבך, בהתאם לנהלי חברת מלם מערכות בע"מ ו/או כל חברת בת ו/או > חברה קשורה שלה (להלן : "החברה") וזכויות החתימה בהן, כל הצעה, התחייבות > או מצג מטעם החברה, מחייבים מסמך נפרד וחתום על ידי מורשי החתימה של > החברה, הנושא את לוגו החברה או שמה המודפס ובצירוף חותמת החברה. בהעדר > מסמך כאמור (לרבות מסמך סרוק) המצורף להודעת דואר אלקטרוני זאת, אין > לראות באמור בהודעה אלא משום טיוטה לדיון, ואין להסתמך עליה לביצוע פעולה > עסקית או משפטית כלשהי. Please note that in accordance with Malam > and/or its subsidiaries (hereinafter : "Malam") regulations and > signatory rights, no offer, agreement, concession or representation is > binding on the Malam, unless accompanied by a duly signed separate > document (or a scanned version thereof), affixed with the Malam seal. > > -
Re: IZUSEC job
SMP/E doesn't have an object type called JOB or JCL. SRC didn't find anthing. Gadi -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of Itschak Mugzach Sent: Wednesday, November 23, 2016 9:17 AM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: IZUSEC job Gadi. Ask smp. If there a job with this name, smp kow it. Itschak בתאריך 23 בנוב 2016 09:14, "גדי בן אבי" <gad...@malam.com> כתב: > I looked in SIZUJCL. > It's not there :-( > Gadi > > -Original Message- > From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] > On Behalf Of Elardus Engelbrecht > Sent: Wednesday, November 23, 2016 8:57 AM > To: IBM-MAIN@LISTSERV.UA.EDU > Subject: Re: IZUSEC job > > GADI wrote: > > >I am trying to configure z/OSMF for the first time. > > Good luck. This is a horrible, but managable task. Easier thatn > OMEGAMON of course... ;-) > > > >I can't find the IZUSEC job that created the security definitions for > z/OSMF. > > IBM should have given you a copy of dataset IZU.SIZUJCL which contains > that and other members. This is the same dataset where you find the > jobs to create + populate zHFS datasets amongst other things. > > About security, there are a good handful of IZU*SEC jobs waiting for you. > > > >z/OSMF was installed as part of z/OS using ServerPac. z/OS and z/OSMF > >are v2.1 > > Groete / Greetings > Elardus Engelbrecht > > -- > For IBM-MAIN subscribe / signoff / archive access instructions, send > email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN > לתשומת ליבך, בהתאם לנהלי חברת מלם מערכות בע"מ ו/או כל חברת בת ו/או > חברה קשורה שלה (להלן : "החברה") וזכויות החתימה בהן, כל הצעה, התחייבות > או מצג מטעם החברה, מחייבים מסמך נפרד וחתום על ידי מורשי החתימה של > החברה, הנושא את לוגו החברה או שמה המודפס ובצירוף חותמת החברה. בהעדר > מסמך כאמור (לרבות מסמך > סרוק) המצורף להודעת דואר אלקטרוני זאת, אין לראות באמור בהודעה אלא משום > טיוטה לדיון, ואין להסתמך עליה לביצוע פעולה עסקית או משפטית כלשהי. > Please note that in accordance with Malam and/or its subsidiaries > (hereinafter : > "Malam") regulations and signatory rights, no offer, agreement, > concession or representation is binding on the Malam, unless > accompanied by a duly signed separate document (or a scanned version > thereof), affixed with the Malam seal. > > -- > For IBM-MAIN subscribe / signoff / archive access instructions, send > email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN > -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN לתשומת ליבך, בהתאם לנהלי חברת מלם מערכות בע"מ ו/או כל חברת בת ו/או חברה קשורה שלה (להלן : "החברה") וזכויות החתימה בהן, כל הצעה, התחייבות או מצג מטעם החברה, מחייבים מסמך נפרד וחתום על ידי מורשי החתימה של החברה, הנושא את לוגו החברה או שמה המודפס ובצירוף חותמת החברה. בהעדר מסמך כאמור (לרבות מסמך סרוק) המצורף להודעת דואר אלקטרוני זאת, אין לראות באמור בהודעה אלא משום טיוטה לדיון, ואין להסתמך עליה לביצוע פעולה עסקית או משפטית כלשהי. Please note that in accordance with Malam and/or its subsidiaries (hereinafter : "Malam") regulations and signatory rights, no offer, agreement, concession or representation is binding on the Malam, unless accompanied by a duly signed separate document (or a scanned version thereof), affixed with the Malam seal. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: IZUSEC job
I looked in SIZUJCL. It's not there :-( Gadi -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of Elardus Engelbrecht Sent: Wednesday, November 23, 2016 8:57 AM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: IZUSEC job GADI wrote: >I am trying to configure z/OSMF for the first time. Good luck. This is a horrible, but managable task. Easier thatn OMEGAMON of course... ;-) >I can't find the IZUSEC job that created the security definitions for z/OSMF. IBM should have given you a copy of dataset IZU.SIZUJCL which contains that and other members. This is the same dataset where you find the jobs to create + populate zHFS datasets amongst other things. About security, there are a good handful of IZU*SEC jobs waiting for you. >z/OSMF was installed as part of z/OS using ServerPac. z/OS and z/OSMF >are v2.1 Groete / Greetings Elardus Engelbrecht -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN לתשומת ליבך, בהתאם לנהלי חברת מלם מערכות בע"מ ו/או כל חברת בת ו/או חברה קשורה שלה (להלן : "החברה") וזכויות החתימה בהן, כל הצעה, התחייבות או מצג מטעם החברה, מחייבים מסמך נפרד וחתום על ידי מורשי החתימה של החברה, הנושא את לוגו החברה או שמה המודפס ובצירוף חותמת החברה. בהעדר מסמך כאמור (לרבות מסמך סרוק) המצורף להודעת דואר אלקטרוני זאת, אין לראות באמור בהודעה אלא משום טיוטה לדיון, ואין להסתמך עליה לביצוע פעולה עסקית או משפטית כלשהי. Please note that in accordance with Malam and/or its subsidiaries (hereinafter : "Malam") regulations and signatory rights, no offer, agreement, concession or representation is binding on the Malam, unless accompanied by a duly signed separate document (or a scanned version thereof), affixed with the Malam seal. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
IZUSEC job
Hi, I am trying to configure z/OSMF for the first time. I can’t find the IZUSEC job that created the security definitions for z/OSMF. z/OSMF was installed as part of z/OS using ServerPac. z/OS and z/OSMF are v2.1 Gadi לתשומת ליבך, בהתאם לנהלי חברת מלם מערכות בע"מ ו/או כל חברת בת ו/או חברה קשורה שלה (להלן : "החברה") וזכויות החתימה בהן, כל הצעה, התחייבות או מצג מטעם החברה, מחייבים מסמך נפרד וחתום על ידי מורשי החתימה של החברה, הנושא את לוגו החברה או שמה המודפס ובצירוף חותמת החברה. בהעדר מסמך כאמור (לרבות מסמך סרוק) המצורף להודעת דואר אלקטרוני זאת, אין לראות באמור בהודעה אלא משום טיוטה לדיון, ואין להסתמך עליה לביצוע פעולה עסקית או משפטית כלשהי. Please note that in accordance with Malam and/or its subsidiaries (hereinafter : "Malam") regulations and signatory rights, no offer, agreement, concession or representation is binding on the Malam, unless accompanied by a duly signed separate document (or a scanned version thereof), affixed with the Malam seal. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: Steplib APF failure
All libraries in STEPLIB must be APF authorized in order for the whole concatenation to be APF authorized. -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of Peter Sent: Thursday, November 17, 2016 1:59 PM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Steplib APF failure Hi Group I have installed a product when I try to start it fails with module not being APFed. There are two datasets in STEPLIB. The Dataset1 which has the failing modules is already APFed. Still the STC fails and it was fixed once the second dataset was APFed. I am trying to understand why would STC expect the second dataset in steplib in APF though the calling module is in 1st dataset ? Could some one please explain me ? Peter -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN לתשומת ליבך, בהתאם לנהלי חברת מלם מערכות בע"מ ו/או כל חברת בת ו/או חברה קשורה שלה (להלן : "החברה") וזכויות החתימה בהן, כל הצעה, התחייבות או מצג מטעם החברה, מחייבים מסמך נפרד וחתום על ידי מורשי החתימה של החברה, הנושא את לוגו החברה או שמה המודפס ובצירוף חותמת החברה. בהעדר מסמך כאמור (לרבות מסמך סרוק) המצורף להודעת דואר אלקטרוני זאת, אין לראות באמור בהודעה אלא משום טיוטה לדיון, ואין להסתמך עליה לביצוע פעולה עסקית או משפטית כלשהי. Please note that in accordance with Malam and/or its subsidiaries (hereinafter : "Malam") regulations and signatory rights, no offer, agreement, concession or representation is binding on the Malam, unless accompanied by a duly signed separate document (or a scanned version thereof), affixed with the Malam seal. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: KnowledgeCenter access
It started working right after I sent the message. I guess I scared it into working. -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of Edward Finnell Sent: Tuesday, November 15, 2016 11:42 AM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: KnowledgeCenter access As of right now it seems to be working for z/OS 2.1.0. What were you looking for? http://www.ibm.com/support/knowledgecenter/SSAUWB In a message dated 11/15/2016 3:33:07 A.M. Central Standard Time, gad...@malam.com writes: Does anyone else have problems accessing KnowledgeCenter? I keep getting HTTP Service Temporarily Unavailable messages 9:30 GMT 15nov2016 -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN לתשומת ליבך, בהתאם לנהלי חברת מלם מערכות בע"מ ו/או כל חברת בת ו/או חברה קשורה שלה (להלן : "החברה") וזכויות החתימה בהן, כל הצעה, התחייבות או מצג מטעם החברה, מחייבים מסמך נפרד וחתום על ידי מורשי החתימה של החברה, הנושא את לוגו החברה או שמה המודפס ובצירוף חותמת החברה. בהעדר מסמך כאמור (לרבות מסמך סרוק) המצורף להודעת דואר אלקטרוני זאת, אין לראות באמור בהודעה אלא משום טיוטה לדיון, ואין להסתמך עליה לביצוע פעולה עסקית או משפטית כלשהי. Please note that in accordance with Malam and/or its subsidiaries (hereinafter : "Malam") regulations and signatory rights, no offer, agreement, concession or representation is binding on the Malam, unless accompanied by a duly signed separate document (or a scanned version thereof), affixed with the Malam seal. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
KnowledgeCenter access
Hi, Does anyone else have problems accessing KnowledgeCenter? I keep getting HTTP Service Temporarily Unavailable messages 9:30 GMT 15nov2016 Gadi לתשומת ליבך, בהתאם לנהלי חברת מלם מערכות בע"מ ו/או כל חברת בת ו/או חברה קשורה שלה (להלן : "החברה") וזכויות החתימה בהן, כל הצעה, התחייבות או מצג מטעם החברה, מחייבים מסמך נפרד וחתום על ידי מורשי החתימה של החברה, הנושא את לוגו החברה או שמה המודפס ובצירוף חותמת החברה. בהעדר מסמך כאמור (לרבות מסמך סרוק) המצורף להודעת דואר אלקטרוני זאת, אין לראות באמור בהודעה אלא משום טיוטה לדיון, ואין להסתמך עליה לביצוע פעולה עסקית או משפטית כלשהי. Please note that in accordance with Malam and/or its subsidiaries (hereinafter : "Malam") regulations and signatory rights, no offer, agreement, concession or representation is binding on the Malam, unless accompanied by a duly signed separate document (or a scanned version thereof), affixed with the Malam seal. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: I'm not sure that HyperPav is working
I've done that. We are using FDRPAS t copy the data from our old storage subsystem to the new one. It seems that the is a limitation, and HyperPAV will only activate for volumes copied with FDRPAS after an IPL. This is documented in the FDRPAS manual. Gadi -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of Mike Shorkend Sent: Tuesday, August 30, 2016 2:58 PM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: I'm not sure that HyperPav is working Gadi You need to set HYPERPAV=YES in the IECIOSxx PARMLIB member. See http://www.ibm.com/support/knowledgecenter/SSLTBW_2.2.0/com.ibm.zos.v2r2.ieae200/ieae200357.htm You can switch it on and off dynamically using the SETIOS command. See http://www.ibm.com/support/knowledgecenter/SSLTBW_2.2.0/com.ibm.zos.v2r2.ieag100/iea3g1_Syntax49.htm <http://www.ibm.com/support/knowledgecenter/SSLTBW_2.2.0/com.ibm.zos.v2r2.ieae200/ieae200357.htm> Mike On 30 August 2016 at 13:42, גדי בן אבי <gad...@malam.com> wrote: > Hi, > We’re starting to copy volumes to our new DS8884. > Our old controller, did not have PAV functionality, so I’m new to this. > We installed all relevant service. > > If I issue the D IOS,HYPERPAV command I get IOS098I 13.37.28 HYPERPAV > DATA 353 HYPERPAV MODE IS SET TO XPAV > > I’m not sure that Hyperpav is working: > If I issue the command D M=DEV(2000D) I get: > IEE174I 13.10.11 DISPLAY M 416 > DEVICE 0200D STATUS=ONLINE > CHP 30 31 32 33 > ENTRY LINK ADDRESS.. .. .. .. > DEST LINK ADDRESS 0D 0D 0D 0D > PATH ONLINE YYYY > CHP PHYSICALLY ONLINE YYYY > PATH OPERATIONAL YYYY > MANAGED NNNN > CU NUMBER 8000 8000 8000 8000 > MAXIMUM MANAGED CHPID(S) ALLOWED: 0 > DESTINATION CU LOGICAL ADDRESS = 00 > SCP CU ND = 002107.980.IBM.75.000GDX91.0231 > SCP TOKEN NED = 002107.900.IBM.75.000GDX91. > SCP DEVICE NED= 002107.900.IBM.75.000GDX91.000D > FUNCTIONS ENABLED = MIDAW, ZHPF > > If I issue the command DS QPAV,200D,1 I get: > IEE459I 13.21.30 DEVSERV QPAVS 470 > HOST SUBSYSTEM > CONFIGURATION CONFIGURATION > --- - > UNIT UNITUA > NUM. UA TYPESTATUS SSID ADDR. TYPE > - -- -- -- > 0200D 0D NON-PAV2000 0D BASE > > If I look in RMF Moniter II using the DEV command, I get: > 13:38:46 I=58% DEV ACTV RESP IOSQ -DELAY- PEND DISC CONN %D %D > STG GRP VOLSER NUM PAV LCU RATE TIME TIME CMR DB TIME TIME TIME UT RV > > MKB666 200D 1 0016 41.25 .193 .000 .00 .00 .098 .000 .094 2 2 > > I would expect the PAV column to say 1.0H > > Am I missing something? > Do I have to turn Hyperpav on at the device or control unit level? > > Gadi > > > לשימת לבך, בהתאם לנהלי חברת מלם מערכות בע"מ ו/או כל חברת בת ו/או חברה > קשורה שלה (להלן : "החברה") וזכויות החתימה בהן, כל הצעה, התחייבות או > מצג מטעם החברה, מחייבים מסמך נפרד וחתום על ידי מורשי החתימה של החברה, > הנושא את לוגו החברה או שמה המודפס ובצירוף חותמת החברה. בהעדר מסמך > כאמור (לרבות מסמך > סרוק) המצורף להודעת דואר אלקטרוני זאת, אין לראות באמור בהודעה אלא משום > טיוטה לדיון, ואין להסתמך עליה לביצוע פעולה עסקית או משפטית כלשהי. > > Please note that in accordance with Malam and/or its subsidiaries > (hereinafter : "Malam") regulations and signatory rights, no offer, > agreement, concession or representation is binding on the Malam, > unless accompanied by a duly signed separate document (or a scanned > version thereof), affixed with the Malam seal. > > -- > For IBM-MAIN subscribe / signoff / archive access instructions, send > email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN > -- Mike Shorkend m...@shorkend.com www.shorkend.com Tel: +972524208743 Fax: +97239772196 -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN לשימת לבך, בהתאם לנהלי חברת מלם מערכות בע"מ ו/או כל חברת בת ו/או חברה קשורה שלה (להלן : "החברה") וזכויות החתימה בהן, כל הצעה, התחייבות או מצג מטעם החברה, מחייבים מסמך נפרד וחתום על ידי מורשי החתימה של החברה, הנושא את לוגו החברה או שמה המודפס ובצירוף חותמת החברה. בהעדר מסמך כאמור (לרבות מסמך סרוק) המצורף להודעת דואר אלקטרוני זאת, אין לראות באמור בהודעה אלא משום טיוטה לדיון, ואין להסתמך עליה לביצוע פעולה ע
I'm not sure that HyperPav is working
Hi, We’re starting to copy volumes to our new DS8884. Our old controller, did not have PAV functionality, so I’m new to this. We installed all relevant service. If I issue the D IOS,HYPERPAV command I get IOS098I 13.37.28 HYPERPAV DATA 353 HYPERPAV MODE IS SET TO XPAV I’m not sure that Hyperpav is working: If I issue the command D M=DEV(2000D) I get: IEE174I 13.10.11 DISPLAY M 416 DEVICE 0200D STATUS=ONLINE CHP 30 31 32 33 ENTRY LINK ADDRESS.. .. .. .. DEST LINK ADDRESS 0D 0D 0D 0D PATH ONLINE YYYY CHP PHYSICALLY ONLINE YYYY PATH OPERATIONAL YYYY MANAGED NNNN CU NUMBER 8000 8000 8000 8000 MAXIMUM MANAGED CHPID(S) ALLOWED: 0 DESTINATION CU LOGICAL ADDRESS = 00 SCP CU ND = 002107.980.IBM.75.000GDX91.0231 SCP TOKEN NED = 002107.900.IBM.75.000GDX91. SCP DEVICE NED= 002107.900.IBM.75.000GDX91.000D FUNCTIONS ENABLED = MIDAW, ZHPF If I issue the command DS QPAV,200D,1 I get: IEE459I 13.21.30 DEVSERV QPAVS 470 HOST SUBSYSTEM CONFIGURATION CONFIGURATION --- - UNIT UNITUA NUM. UA TYPESTATUS SSID ADDR. TYPE - -- -- -- 0200D 0D NON-PAV2000 0D BASE If I look in RMF Moniter II using the DEV command, I get: 13:38:46 I=58% DEV ACTV RESP IOSQ -DELAY- PEND DISC CONN %D %D STG GRP VOLSER NUM PAV LCU RATE TIME TIME CMR DB TIME TIME TIME UT RV MKB666 200D 1 0016 41.25 .193 .000 .00 .00 .098 .000 .094 2 2 I would expect the PAV column to say 1.0H Am I missing something? Do I have to turn Hyperpav on at the device or control unit level? Gadi לשימת לבך, בהתאם לנהלי חברת מלם מערכות בע"מ ו/או כל חברת בת ו/או חברה קשורה שלה (להלן : "החברה") וזכויות החתימה בהן, כל הצעה, התחייבות או מצג מטעם החברה, מחייבים מסמך נפרד וחתום על ידי מורשי החתימה של החברה, הנושא את לוגו החברה או שמה המודפס ובצירוף חותמת החברה. בהעדר מסמך כאמור (לרבות מסמך סרוק) המצורף להודעת דואר אלקטרוני זאת, אין לראות באמור בהודעה אלא משום טיוטה לדיון, ואין להסתמך עליה לביצוע פעולה עסקית או משפטית כלשהי. Please note that in accordance with Malam and/or its subsidiaries (hereinafter : "Malam") regulations and signatory rights, no offer, agreement, concession or representation is binding on the Malam, unless accompanied by a duly signed separate document (or a scanned version thereof), affixed with the Malam seal. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: PTF order fulfillment issues and getting HOLDDATA
As far as I know, you cannot use ftp anymore to download PTF's. You have to use HTTPS or FTPS (or is it sftp). In order to use HTTPS, I added: downloadmethod="https" downloadkeyring="javatruststore" to the information in MYCLIENT Gadi -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of Richards, Robert B. Sent: Monday, August 15, 2016 1:48 PM To: IBM-MAIN@LISTSERV.UA.EDU Subject: PTF order fulfillment issues and getting HOLDDATA Is anyone else having issues with order fulfillment with IBM? I ordered a single PTF through Shopz this morning and it generates the appropriate pairing below (contents removed): They generate the userid and password, so why do I get this below? EZA1701I >>> PASS 530 Login incorrect. EZA1735I Std Return Code = 26530, Error Code = 00011 EZA1701I >>> QUIT 221 Goodbye. I even deleted and reordered the PTF, getting the same result. Also, my attempts in a separate nightly job to get full HOLDDATA also failed for the last two nights. EZA1554I Connecting to: dispmy-112.mul.ie.ibm.com EZA2589E Connection to server interrupted or timed out. Waiting for reply EZA1721W Server not responding, closing connection. EZA1735I Std Return Code = 10220, Error Code = 8 and EZA1554I Connecting to: dispby-112.boulder.ibm.com EZA2589E Connection to server interrupted or timed out. Initial connection EZA1735I Std Return Code = 1, Error Code = 8 -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN לשימת לבך, בהתאם לנהלי חברת מלם מערכות בע"מ ו/או כל חברת בת ו/או חברה קשורה שלה (להלן : "החברה") וזכויות החתימה בהן, כל הצעה, התחייבות או מצג מטעם החברה, מחייבים מסמך נפרד וחתום על ידי מורשי החתימה של החברה, הנושא את לוגו החברה או שמה המודפס ובצירוף חותמת החברה. בהעדר מסמך כאמור (לרבות מסמך סרוק) המצורף להודעת דואר אלקטרוני זאת, אין לראות באמור בהודעה אלא משום טיוטה לדיון, ואין להסתמך עליה לביצוע פעולה עסקית או משפטית כלשהי. Please note that in accordance with Malam and/or its subsidiaries (hereinafter : "Malam") regulations and signatory rights, no offer, agreement, concession or representation is binding on the Malam, unless accompanied by a duly signed separate document (or a scanned version thereof), affixed with the Malam seal. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: HCD Question
Thanks That was what I was looking for Gadi -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of Jesse 1 Robinson Sent: Monday, July 25, 2016 7:40 PM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: HCD Question I cannot give a complete answer, but I would think that the first step is to convert the IOCP statements into a separate IODF: +--- Migrate Configuration Data + | | | | | Select one of the following tasks. | | | | __ 1. Migrate IOCP/OS data | | 2. *Migrate switch configuration data | | | | * = requires TSA I/O Operations | | | | | | | +--+ The second step would be to merge the IODFs. For years we maintained two separate IODFs for our two data centers. Eventually they were combined (by someone else) into one. Worst case would be to manually define the smaller of the two into the larger one. I suspect that merging must be a largely manual process anyway because HCD (or HCM) would have no way to resolve conflicts. . . . J.O.Skip Robinson Southern California Edison Company Electric Dragon Team Paddler SHARE MVS Program Co-Manager 323-715-0595 Mobile 626-302-7535 Office robin...@sce.com -Original Message- From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf Of ??? ?? ??? Sent: Monday, July 25, 2016 6:29 AM To: IBM-MAIN@LISTSERV.UA.EDU Subject: (External):HCD Question Hi, I would like to merge IOCP statements into an existing IODF. How do I do this? Gadi -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN לשימת לבך, בהתאם לנהלי חברת מלם מערכות בע"מ ו/או כל חברת בת ו/או חברה קשורה שלה (להלן : "החברה") וזכויות החתימה בהן, כל הצעה, התחייבות או מצג מטעם החברה, מחייבים מסמך נפרד וחתום על ידי מורשי החתימה של החברה, הנושא את לוגו החברה או שמה המודפס ובצירוף חותמת החברה. בהעדר מסמך כאמור (לרבות מסמך סרוק) המצורף להודעת דואר אלקטרוני זאת, אין לראות באמור בהודעה אלא משום טיוטה לדיון, ואין להסתמך עליה לביצוע פעולה עסקית או משפטית כלשהי. Please note that in accordance with Malam and/or its subsidiaries (hereinafter : "Malam") regulations and signatory rights, no offer, agreement, concession or representation is binding on the Malam, unless accompanied by a duly signed separate document (or a scanned version thereof), affixed with the Malam seal. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN