Re: Getting Enhanced HOLDDATA from IBM
On 12/4/2020 2:25 PM, Richards, Robert B. , CTR wrote: I changed dispby-112 to service and it worked flawlessly. What changed about dispby-112.boulder.ibm.com to have caused my error? I don't even know what dispby-112.boulder.ibm.com is. Where did you get that server host name? ftp://service.boulder.ibm.com is the correct server to manually download the /s390/holddata/full.txt file. But as already mentioned, you should check out SMP/E RECEIVE ORDER instead to get both HOLDDATA and PTFs. Kurt Quackenbush -- IBM, SMP/E Development Chuck Norris never uses CHECK when he applies PTFs. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: Getting Enhanced HOLDDATA from IBM
To get just the hold data, you can specify: SET BDY(GLOBAL). RECEIVE ORDER(ORDERSERVER(ORDSRVR) CLIENT(MYCLIENT) CONTENT(HOLDDATA) FORTGTZONES(zzz)) DELETEPKG. Or if you prefer, you can download it without receiving it by specifying TRANSFERONLY. Then you can RECEIVE FROMNTS into each target zone you wish. Dana On Fri, 4 Dec 2020 19:12:29 +, Jousma, David wrote: >Just have to run the RECEIVE ORDER once for every global zone. If you don't >want the PTF;s to download there is an option for just hold data I believe. >I didn't look that up, but I know if I order, and there isn't any maintenance >available the messages indicate that it was converted to a download of just >the HOLD DATA. > -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: Getting Enhanced HOLDDATA from IBM
No problem, Rob. To all, I changed dispby-112 to service and it worked flawlessly. What changed about dispby-112.boulder.ibm.com to have caused my error? Thanks to everyone that replied. Bob -Original Message- From: IBM Mainframe Discussion List On Behalf Of Jackson, Rob Sent: Friday, December 4, 2020 1:08 PM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: Getting Enhanced HOLDDATA from IBM Pardon me, please. Robert, that is, not Richard. First Horizon Bank Mainframe Technical Support -Original Message- From: Jackson, Rob Sent: Friday, December 4, 2020 1:06 PM To: IBM-MAIN@LISTSERV.UA.EDU Subject: RE: Getting Enhanced HOLDDATA from IBM Richard, Gil is using passive mode; you are using active, and it does look like a data channel issue. Try these in SYSFTPD: FWFRIENDLY TRUE; PASSIVEIGNOREADDR TRUE; EPSV4 TRUE; First Horizon Bank Mainframe Technical Support -Original Message- From: IBM Mainframe Discussion List On Behalf Of Paul Gilmartin Sent: Friday, December 4, 2020 12:54 PM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: Getting Enhanced HOLDDATA from IBM [External Email. Exercise caution when clicking links or opening attachments.] On Fri, 4 Dec 2020 17:25:09 +, Richards, Robert B. (CTR) wrote: >EZA1736I FTP (EXIT >EZY2640I Using 'SYS1.TCPPARMS(FTPDATA)' for local site configuration >parameters. >EZA1450I IBM FTP CS V2R3 >EZA1772I FTP: EXIT has been set. >EZA1456I Connect to ? >EZA1736I dispby-112.boulder.ibm.com >EZA1554I Connecting to: dispby-112.boulder.ibm.com 170.225.15.112 port: 21. >220-* I used: ftp://service.boulder.ibm.com/s390/holddata/full.txt It seems intermittent. I got some timeouts; the last few times it succeeded. That might mean that it cached enough to work finally. I had no failures with ...service... ... >EZA1736I locsite lrecl=80 blksize=0 recfm=fb cyl primary=15 EZA1460I >Command: >EZA1736I get full.txt 'xxxdsnxxx' (repl EZA1701I >>> PORT >10,1,21,1,112,164 >200 PORT command successful >EZA1701I >>> RETR full.txt >150 Opening ASCII mode data connection for full.txt (16877484 bytes) >EZA2590E recv error from receive_data - EDC8121I CONNECTION RESET. >(errno2=0x74520442) EZA2607W Transfer aborted due to receive error (-1) >EZA2589E Connection to server interrupted or timed out. Initial IPv6 >connection EZA1721W Server not responding, closing connection. >EZA1735I Std Return Code = 16150, Error Code = 00010 -- gil -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN Confidentiality notice: This e-mail message, including any attachments, may contain legally privileged and/or confidential information. If you are not the intended recipient(s), or the employee or agent responsible for delivery of this message to the intended recipient(s), you are hereby notified that any dissemination, distribution, or copying of this e-mail message is strictly prohibited. If you have received this message in error, please immediately notify the sender and delete this e-mail message from your computer. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: Getting Enhanced HOLDDATA from IBM
Thanks Dave. It's the former and I will definitely investigate your alternative. 😊 Bob -Original Message- From: IBM Mainframe Discussion List On Behalf Of Jousma, David Sent: Friday, December 4, 2020 2:12 PM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: Getting Enhanced HOLDDATA from IBM Just have to run the RECEIVE ORDER once for every global zone. If you don't want the PTF;s to download there is an option for just hold data I believe. I didn't look that up, but I know if I order, and there isn't any maintenance available the messages indicate that it was converted to a download of just the HOLD DATA. I guess the question is if you have the ability to run RECEIVE ORDER directly on your mainframes, or if firewall rules prevent that access. If the latter, then it probably makes sense to continue manually downloading the year.txt file and receiving it. _ Dave Jousma AVP | Director, Technology Engineering Fifth Third Bank | 1830 East Paris Ave, SE | MD RSCB2H | Grand Rapids, MI 49546 616.653.8429 | fax: 616.653.2717 -Original Message- From: IBM Mainframe Discussion List On Behalf Of Richards, Robert B. (CTR) Sent: Friday, December 4, 2020 1:35 PM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: Getting Enhanced HOLDDATA from IBM **CAUTION EXTERNAL EMAIL** **DO NOT open attachments or click on links from unknown senders or unexpected emails** Dave, How do you do that into multiple global CSIs? I receive that file into three separate globals (z/OS, CICS and DB2) and then report on them individually. Bob -Original Message- From: IBM Mainframe Discussion List On Behalf Of Jousma, David Sent: Friday, December 4, 2020 1:09 PM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: Getting Enhanced HOLDDATA from IBM I quit downloading that file once I started doing RECEIVE ORDER which also gets you all the hold data too. _ Dave Jousma AVP | Director, Technology Engineering Fifth Third Bank | 1830 East Paris Ave, SE | MD RSCB2H | Grand Rapids, MI 49546 616.653.8429 | fax: 616.653.2717 -Original Message- From: IBM Mainframe Discussion List On Behalf Of Richards, Robert B. (CTR) Sent: Friday, December 4, 2020 12:04 PM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Getting Enhanced HOLDDATA from IBM **CAUTION EXTERNAL EMAIL** **DO NOT open attachments or click on links from unknown senders or unexpected emails** Is anyone else getting connection resets when they attempt to do a FTP "get" of the full.txt file? cd /s390/holddata locsite lrecl=80 blksize=0 recfm=fb cyl primary=15 get full.txt 'your dataset name here' (repl results in: 150 Opening ASCII mode data connection for full.txt (16877484 bytes) EZA2590E recv error from receive_data - EDC8121I CONNECTION RESET. (errno2=0x74520442) EZA2607W Transfer aborted due to receive error (-1) EZA2589E Connection to server interrupted or timed out. Initial IPv6 connection EZA1721W Server not responding, closing connection. EZA1735I Std Return Code = 16150, Error Code = 00010 -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN **CAUTION EXTERNAL EMAIL** **DO NOT open attachments or click on links from unknown senders or unexpected emails** This e-mail transmission contains information that is confidential and may be privileged. It is intended only for the addressee(s) named above. If you receive this e-mail in error, please do not read, copy or disseminate it in any manner. If you are not the intended recipient, any disclosure, copying, distribution or use of the contents of this information is prohibited. Please reply to the message immediately by informing the sender that the message was misdirected. After replying, please erase it from your computer system. Your assistance in correcting this error is appreciated. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN **CAUTION EXTERNAL EMAIL** **DO NOT open attachments or click on links from unknown senders or unexpected emails** This e-mail transmission contains information that is confidential and may be privileged. It is intended only for the addressee(s) named above. If you receive this e-mail in error, please do not read, copy or disseminate it in any manner. If you are no
Re: Getting Enhanced HOLDDATA from IBM
Just have to run the RECEIVE ORDER once for every global zone. If you don't want the PTF;s to download there is an option for just hold data I believe. I didn't look that up, but I know if I order, and there isn't any maintenance available the messages indicate that it was converted to a download of just the HOLD DATA. I guess the question is if you have the ability to run RECEIVE ORDER directly on your mainframes, or if firewall rules prevent that access. If the latter, then it probably makes sense to continue manually downloading the year.txt file and receiving it. _ Dave Jousma AVP | Director, Technology Engineering Fifth Third Bank | 1830 East Paris Ave, SE | MD RSCB2H | Grand Rapids, MI 49546 616.653.8429 | fax: 616.653.2717 -Original Message- From: IBM Mainframe Discussion List On Behalf Of Richards, Robert B. (CTR) Sent: Friday, December 4, 2020 1:35 PM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: Getting Enhanced HOLDDATA from IBM **CAUTION EXTERNAL EMAIL** **DO NOT open attachments or click on links from unknown senders or unexpected emails** Dave, How do you do that into multiple global CSIs? I receive that file into three separate globals (z/OS, CICS and DB2) and then report on them individually. Bob -Original Message- From: IBM Mainframe Discussion List On Behalf Of Jousma, David Sent: Friday, December 4, 2020 1:09 PM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: Getting Enhanced HOLDDATA from IBM I quit downloading that file once I started doing RECEIVE ORDER which also gets you all the hold data too. _ Dave Jousma AVP | Director, Technology Engineering Fifth Third Bank | 1830 East Paris Ave, SE | MD RSCB2H | Grand Rapids, MI 49546 616.653.8429 | fax: 616.653.2717 -Original Message- From: IBM Mainframe Discussion List On Behalf Of Richards, Robert B. (CTR) Sent: Friday, December 4, 2020 12:04 PM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Getting Enhanced HOLDDATA from IBM **CAUTION EXTERNAL EMAIL** **DO NOT open attachments or click on links from unknown senders or unexpected emails** Is anyone else getting connection resets when they attempt to do a FTP "get" of the full.txt file? cd /s390/holddata locsite lrecl=80 blksize=0 recfm=fb cyl primary=15 get full.txt 'your dataset name here' (repl results in: 150 Opening ASCII mode data connection for full.txt (16877484 bytes) EZA2590E recv error from receive_data - EDC8121I CONNECTION RESET. (errno2=0x74520442) EZA2607W Transfer aborted due to receive error (-1) EZA2589E Connection to server interrupted or timed out. Initial IPv6 connection EZA1721W Server not responding, closing connection. EZA1735I Std Return Code = 16150, Error Code = 00010 -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN **CAUTION EXTERNAL EMAIL** **DO NOT open attachments or click on links from unknown senders or unexpected emails** This e-mail transmission contains information that is confidential and may be privileged. It is intended only for the addressee(s) named above. If you receive this e-mail in error, please do not read, copy or disseminate it in any manner. If you are not the intended recipient, any disclosure, copying, distribution or use of the contents of this information is prohibited. Please reply to the message immediately by informing the sender that the message was misdirected. After replying, please erase it from your computer system. Your assistance in correcting this error is appreciated. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN **CAUTION EXTERNAL EMAIL** **DO NOT open attachments or click on links from unknown senders or unexpected emails** This e-mail transmission contains information that is confidential and may be privileged. It is intended only for the addressee(s) named above. If you receive this e-mail in error, please do not read, copy or disseminate it in any manner. If you are not the intended recipient, any disclosure, copying, distribution or use of the contents of this information is prohibited. Please reply to the message immediately by informing the sender that the message was misdirected. After replying, please erase it from your computer system. Your assistance in c
Re: Getting Enhanced HOLDDATA from IBM
Dave, How do you do that into multiple global CSIs? I receive that file into three separate globals (z/OS, CICS and DB2) and then report on them individually. Bob -Original Message- From: IBM Mainframe Discussion List On Behalf Of Jousma, David Sent: Friday, December 4, 2020 1:09 PM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: Getting Enhanced HOLDDATA from IBM I quit downloading that file once I started doing RECEIVE ORDER which also gets you all the hold data too. _ Dave Jousma AVP | Director, Technology Engineering Fifth Third Bank | 1830 East Paris Ave, SE | MD RSCB2H | Grand Rapids, MI 49546 616.653.8429 | fax: 616.653.2717 -Original Message- From: IBM Mainframe Discussion List On Behalf Of Richards, Robert B. (CTR) Sent: Friday, December 4, 2020 12:04 PM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Getting Enhanced HOLDDATA from IBM **CAUTION EXTERNAL EMAIL** **DO NOT open attachments or click on links from unknown senders or unexpected emails** Is anyone else getting connection resets when they attempt to do a FTP "get" of the full.txt file? cd /s390/holddata locsite lrecl=80 blksize=0 recfm=fb cyl primary=15 get full.txt 'your dataset name here' (repl results in: 150 Opening ASCII mode data connection for full.txt (16877484 bytes) EZA2590E recv error from receive_data - EDC8121I CONNECTION RESET. (errno2=0x74520442) EZA2607W Transfer aborted due to receive error (-1) EZA2589E Connection to server interrupted or timed out. Initial IPv6 connection EZA1721W Server not responding, closing connection. EZA1735I Std Return Code = 16150, Error Code = 00010 -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN **CAUTION EXTERNAL EMAIL** **DO NOT open attachments or click on links from unknown senders or unexpected emails** This e-mail transmission contains information that is confidential and may be privileged. It is intended only for the addressee(s) named above. If you receive this e-mail in error, please do not read, copy or disseminate it in any manner. If you are not the intended recipient, any disclosure, copying, distribution or use of the contents of this information is prohibited. Please reply to the message immediately by informing the sender that the message was misdirected. After replying, please erase it from your computer system. Your assistance in correcting this error is appreciated. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: Getting Enhanced HOLDDATA from IBM
I quit downloading that file once I started doing RECEIVE ORDER which also gets you all the hold data too. _ Dave Jousma AVP | Director, Technology Engineering Fifth Third Bank | 1830 East Paris Ave, SE | MD RSCB2H | Grand Rapids, MI 49546 616.653.8429 | fax: 616.653.2717 -Original Message- From: IBM Mainframe Discussion List On Behalf Of Richards, Robert B. (CTR) Sent: Friday, December 4, 2020 12:04 PM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Getting Enhanced HOLDDATA from IBM **CAUTION EXTERNAL EMAIL** **DO NOT open attachments or click on links from unknown senders or unexpected emails** Is anyone else getting connection resets when they attempt to do a FTP "get" of the full.txt file? cd /s390/holddata locsite lrecl=80 blksize=0 recfm=fb cyl primary=15 get full.txt 'your dataset name here' (repl results in: 150 Opening ASCII mode data connection for full.txt (16877484 bytes) EZA2590E recv error from receive_data - EDC8121I CONNECTION RESET. (errno2=0x74520442) EZA2607W Transfer aborted due to receive error (-1) EZA2589E Connection to server interrupted or timed out. Initial IPv6 connection EZA1721W Server not responding, closing connection. EZA1735I Std Return Code = 16150, Error Code = 00010 -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN **CAUTION EXTERNAL EMAIL** **DO NOT open attachments or click on links from unknown senders or unexpected emails** This e-mail transmission contains information that is confidential and may be privileged. It is intended only for the addressee(s) named above. If you receive this e-mail in error, please do not read, copy or disseminate it in any manner. If you are not the intended recipient, any disclosure, copying, distribution or use of the contents of this information is prohibited. Please reply to the message immediately by informing the sender that the message was misdirected. After replying, please erase it from your computer system. Your assistance in correcting this error is appreciated. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: Getting Enhanced HOLDDATA from IBM
Pardon me, please. Robert, that is, not Richard. First Horizon Bank Mainframe Technical Support -Original Message- From: Jackson, Rob Sent: Friday, December 4, 2020 1:06 PM To: IBM-MAIN@LISTSERV.UA.EDU Subject: RE: Getting Enhanced HOLDDATA from IBM Richard, Gil is using passive mode; you are using active, and it does look like a data channel issue. Try these in SYSFTPD: FWFRIENDLY TRUE; PASSIVEIGNOREADDR TRUE; EPSV4 TRUE; First Horizon Bank Mainframe Technical Support -Original Message- From: IBM Mainframe Discussion List On Behalf Of Paul Gilmartin Sent: Friday, December 4, 2020 12:54 PM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: Getting Enhanced HOLDDATA from IBM [External Email. Exercise caution when clicking links or opening attachments.] On Fri, 4 Dec 2020 17:25:09 +, Richards, Robert B. (CTR) wrote: >EZA1736I FTP (EXIT >EZY2640I Using 'SYS1.TCPPARMS(FTPDATA)' for local site configuration >parameters. >EZA1450I IBM FTP CS V2R3 >EZA1772I FTP: EXIT has been set. >EZA1456I Connect to ? >EZA1736I dispby-112.boulder.ibm.com >EZA1554I Connecting to: dispby-112.boulder.ibm.com 170.225.15.112 port: 21. >220-* I used: ftp://service.boulder.ibm.com/s390/holddata/full.txt It seems intermittent. I got some timeouts; the last few times it succeeded. That might mean that it cached enough to work finally. I had no failures with ...service... ... >EZA1736I locsite lrecl=80 blksize=0 recfm=fb cyl primary=15 EZA1460I >Command: >EZA1736I get full.txt 'xxxdsnxxx' (repl EZA1701I >>> PORT >10,1,21,1,112,164 >200 PORT command successful >EZA1701I >>> RETR full.txt >150 Opening ASCII mode data connection for full.txt (16877484 bytes) >EZA2590E recv error from receive_data - EDC8121I CONNECTION RESET. >(errno2=0x74520442) EZA2607W Transfer aborted due to receive error (-1) >EZA2589E Connection to server interrupted or timed out. Initial IPv6 >connection EZA1721W Server not responding, closing connection. >EZA1735I Std Return Code = 16150, Error Code = 00010 -- gil -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN Confidentiality notice: This e-mail message, including any attachments, may contain legally privileged and/or confidential information. If you are not the intended recipient(s), or the employee or agent responsible for delivery of this message to the intended recipient(s), you are hereby notified that any dissemination, distribution, or copying of this e-mail message is strictly prohibited. If you have received this message in error, please immediately notify the sender and delete this e-mail message from your computer. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: Getting Enhanced HOLDDATA from IBM
Richard, Gil is using passive mode; you are using active, and it does look like a data channel issue. Try these in SYSFTPD: FWFRIENDLY TRUE; PASSIVEIGNOREADDR TRUE; EPSV4 TRUE; First Horizon Bank Mainframe Technical Support -Original Message- From: IBM Mainframe Discussion List On Behalf Of Paul Gilmartin Sent: Friday, December 4, 2020 12:54 PM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: Getting Enhanced HOLDDATA from IBM [External Email. Exercise caution when clicking links or opening attachments.] On Fri, 4 Dec 2020 17:25:09 +, Richards, Robert B. (CTR) wrote: >EZA1736I FTP (EXIT >EZY2640I Using 'SYS1.TCPPARMS(FTPDATA)' for local site configuration >parameters. >EZA1450I IBM FTP CS V2R3 >EZA1772I FTP: EXIT has been set. >EZA1456I Connect to ? >EZA1736I dispby-112.boulder.ibm.com >EZA1554I Connecting to: dispby-112.boulder.ibm.com 170.225.15.112 port: 21. >220-* I used: ftp://service.boulder.ibm.com/s390/holddata/full.txt It seems intermittent. I got some timeouts; the last few times it succeeded. That might mean that it cached enough to work finally. I had no failures with ...service... ... >EZA1736I locsite lrecl=80 blksize=0 recfm=fb cyl primary=15 EZA1460I >Command: >EZA1736I get full.txt 'xxxdsnxxx' (repl EZA1701I >>> PORT >10,1,21,1,112,164 >200 PORT command successful >EZA1701I >>> RETR full.txt >150 Opening ASCII mode data connection for full.txt (16877484 bytes) >EZA2590E recv error from receive_data - EDC8121I CONNECTION RESET. >(errno2=0x74520442) EZA2607W Transfer aborted due to receive error (-1) >EZA2589E Connection to server interrupted or timed out. Initial IPv6 >connection EZA1721W Server not responding, closing connection. >EZA1735I Std Return Code = 16150, Error Code = 00010 -- gil -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN Confidentiality notice: This e-mail message, including any attachments, may contain legally privileged and/or confidential information. If you are not the intended recipient(s), or the employee or agent responsible for delivery of this message to the intended recipient(s), you are hereby notified that any dissemination, distribution, or copying of this e-mail message is strictly prohibited. If you have received this message in error, please immediately notify the sender and delete this e-mail message from your computer. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: Getting Enhanced HOLDDATA from IBM
On Fri, 4 Dec 2020 17:25:09 +, Richards, Robert B. (CTR) wrote: >EZA1736I FTP (EXIT > >EZY2640I Using 'SYS1.TCPPARMS(FTPDATA)' for local site configuration >parameters. >EZA1450I IBM FTP CS V2R3 > >EZA1772I FTP: EXIT has been set. > >EZA1456I Connect to ? > >EZA1736I dispby-112.boulder.ibm.com > >EZA1554I Connecting to: dispby-112.boulder.ibm.com 170.225.15.112 port: 21. > >220-* I used: ftp://service.boulder.ibm.com/s390/holddata/full.txt It seems intermittent. I got some timeouts; the last few times it succeeded. That might mean that it cached enough to work finally. I had no failures with ...service... ... >EZA1736I locsite lrecl=80 blksize=0 recfm=fb cyl primary=15 > >EZA1460I Command: > >EZA1736I get full.txt 'xxxdsnxxx' (repl >EZA1701I >>> PORT 10,1,21,1,112,164 > >200 PORT command successful > >EZA1701I >>> RETR full.txt > >150 Opening ASCII mode data connection for full.txt (16877484 bytes) > >EZA2590E recv error from receive_data - EDC8121I CONNECTION RESET. >(errno2=0x74520442) >EZA2607W Transfer aborted due to receive error (-1) > >EZA2589E Connection to server interrupted or timed out. Initial IPv6 >connection >EZA1721W Server not responding, closing connection. > >EZA1735I Std Return Code = 16150, Error Code = 00010 -- gil -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: Getting Enhanced HOLDDATA from IBM
EZA1736I FTP (EXIT EZY2640I Using 'SYS1.TCPPARMS(FTPDATA)' for local site configuration parameters. EZA1450I IBM FTP CS V2R3 EZA1772I FTP: EXIT has been set. EZA1456I Connect to ? EZA1736I dispby-112.boulder.ibm.com EZA1554I Connecting to: dispby-112.boulder.ibm.com 170.225.15.112 port: 21. 220-** ** * IBM's internal systems must only be used for conducting IBM's * * business or for purposes authorized by IBM management.* ** * Use is subject to audit at any time by IBM management.* ** * Important Please read* ** * Machine Code updates provided through this site are available * * only for IBM machines that are under warranty or an IBM hardware * * maintenance service agreement Code for operating systems or other * * software products is available only where entitled under the * * applicable software warranty or IBM software maintenance * * agreement. All code (including Machine Code updates, samples, * * fixes or other software downloads)provided through this site * * is subject to the terms of the license agreements which * * govern the use of the associated code. Some exceptions may* * apply.IBM reserves the right to change, modify or withdraw its* * offerings,policies and practices at any time. * ** 220 ProFTPD Server (proftpd) [170.225.15.112] EZA1459I NAME (dispby-112.boulder.ibm.com:xxx): EZA1701I >>> USER anonymous 331 Anonymous login ok, send your complete email address as your password EZA1789I PASSWORD: EZA1701I >>> PASS 230 Anonymous access granted, restrictions apply EZA1460I Command: EZA1736I cd /s390/holddata EZA1701I >>> CWD /s390/holddata 250 CWD command successful EZA1460I Command: EZA1736I locsite lrecl=80 blksize=0 recfm=fb cyl primary=15 EZA1460I Command: EZA1736I get full.txt 'xxxdsnxxx' (repl EZA1701I >>> PORT 10,1,21,1,112,164 200 PORT command successful EZA1701I >>> RETR full.txt 150 Opening ASCII mode data connection for full.txt (16877484 bytes) EZA2590E recv error from receive_data - EDC8121I CONNECTION RESET. (errno2=0x74520442) EZA2607W Transfer aborted due to receive error (-1) EZA2589E Connection to server interrupted or timed out. Initial IPv6 connection EZA1721W Server not responding, closing connection. EZA1735I Std Return Code = 16150, Error Code = 00010 -Original Message- From: IBM Mainframe Discussion List On Behalf Of Paul Gilmartin Sent: Friday, December 4, 2020 12:12 PM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: Getting Enhanced HOLDDATA from IB
Re: Getting Enhanced HOLDDATA from IBM
On Fri, 4 Dec 2020 17:03:37 +, Richards, Robert B. (CTR) wrote: >Is anyone else getting connection resets when they attempt to do a FTP "get" >of the full.txt file? > >cd /s390/holddata >locsite lrecl=80 blksize=0 recfm=fb cyl primary=15 >get full.txt 'your dataset name here' (repl > Could you provide a full transcript:? >results in: > >150 Opening ASCII mode data connection for full.txt (16877484 bytes) >EZA2590E recv error from receive_data - EDC8121I CONNECTION RESET. >(errno2=0x74520442) >EZA2607W Transfer aborted due to receive error (-1) >EZA2589E Connection to server interrupted or timed out. Initial IPv6 connection >EZA1721W Server not responding, closing connection. >EZA1735I Std Return Code = 16150, Error Code = 00010 > Not I: 647 $ curl -fOD - ftp://service.boulder.ibm.com/s390/holddata/full.txt % Total% Received % Xferd Average Speed TimeTime Time Current Dload Upload Total SpentLeft Speed 0 00 00 0 0 0 --:--:-- 0:00:02 --:--:-- 0220-*** * 220-** 220-... 220 service.boulder.ibm.com FTP server (WU Version 2.6.3(5) Custom Fri Jun 2 11:15:33 MDT 2017) ready. 331 Guest login ok, send any password. 230 Guest login ok, access restrictions apply. 257 "/" is current directory. 0 00 00 0 0 0 --:--:-- 0:00:03 --:--:-- 0250 CWD command successful. 250 CWD command successful. 500 'EPSV': command not understood. 227 Entering Passive Mode (170,225,15,26,242,29) 200 Type set to I. 213 16877484 150 Opening BINARY mode data connection for full.txt (16877484 bytes). 97 16.0M 97 15.6M0 0 817k 0 0:00:20 0:00:19 0:00:01 982k226 Transfer complete. 100 16.0M 100 16.0M0 0 839k 0 0:00:19 0:00:19 --:--:-- 1056k 648 $ ls -l full.txt -rw-r--r-- 1 paulgilm paulgilm 16877484 Dec 4 10:06 full.txt -- gil -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Getting Enhanced HOLDDATA from IBM
Is anyone else getting connection resets when they attempt to do a FTP "get" of the full.txt file? cd /s390/holddata locsite lrecl=80 blksize=0 recfm=fb cyl primary=15 get full.txt 'your dataset name here' (repl results in: 150 Opening ASCII mode data connection for full.txt (16877484 bytes) EZA2590E recv error from receive_data - EDC8121I CONNECTION RESET. (errno2=0x74520442) EZA2607W Transfer aborted due to receive error (-1) EZA2589E Connection to server interrupted or timed out. Initial IPv6 connection EZA1721W Server not responding, closing connection. EZA1735I Std Return Code = 16150, Error Code = 00010 -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN