Re: How do I assemble a CP EXIT ?
Jim, David, Dave, My CP exit 1200 is working perfectly now. Thanks for helping me out. Bye, Geert. -Original Message- From: The IBM z/VM Operating System [mailto:IBMVM@LISTSERV.UARK.EDU] On Behalf Of Dave Jones Sent: dinsdag 3 mei 2011 2:24 To: IBMVM@LISTSERV.UARK.EDU Subject: Re: How do I assemble a CP EXIT ? Hi, Geert. If Jim's instructions worked for you, that means that your site has the HLASM licensed and installed! You should be able to follow the rest of the instruction and load your CP EXITlet us know if that works. DJ On 05/02/2011 03:42 PM, Dieltiens Geert wrote: Jim, I tried that and the assembly worked, with no errors. I'll try to use the TEXT module as a CP EXIT tomorrow. Thanks! Bye, Geert. -Original Message- From: The IBM z/VM Operating System [mailto:IBMVM@LISTSERV.UARK.EDU] On Behalf Of Hughes, Jim Sent: maandag 2 mei 2011 22:30 To: IBMVM@LISTSERV.UARK.EDU Subject: Re: How do I assemble a CP EXIT ? Here is what I do: VMFSETUP ZVM CP VMFHLASM OITW2H01 ZVM CP where OITW2H01 is my exit's name. Good Luck. Jim Hughes Consulting Systems Programmer Mainframe Technical Support Group Department of Information Technology State of New Hampshire 27 Hazen Drive Concord, NH 03301 603-271-5586Fax 603.271.1516 Statement of Confidentiality: The contents of this message are confidential. Any unauthorized disclosure, reproduction, use or dissemination (either whole or in part) is prohibited. If you are not the intended recipient of this message, please notify the sender immediately and delete the message from your system. -Original Message- From: The IBM z/VM Operating System [mailto:IBMVM@LISTSERV.UARK.EDU] On Behalf Of Dieltiens Geert Sent: Monday, May 02, 2011 4:17 PM To: IBMVM@LISTSERV.UARK.EDU Subject: How do I assemble a CP EXIT ? Hi all, I'm trying to assemble the JAMSAMA sample for CP EXIT 1200 (for CP DIAL), from z/VM manual 'CP EXIT CUSTOMIZATION'. I understand the assembler sourcecode from the sample, and I've made my own version with minor modifications. Now I would like to assemble it in CMS. Can anyone tell me how to do that? Do I just use the ASSEMBLE command? Do I need GLOBAL MACLIB commands, etc.? Thanks, Geert. DISCLAIMER This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you have received this email in error please notify postmas...@vanbreda.be This footnote also confirms that this email has been checked for the presence of viruses. Informatica J.Van Breda Co NV BTW BE 0427 908 174 -- Dave Jones V/Soft Software www.vsoft-software.com Houston, TX 281.578.7544
How do I assemble a CP EXIT ?
Hi all, I'm trying to assemble the JAMSAMA sample for CP EXIT 1200 (for CP DIAL), from z/VM manual 'CP EXIT CUSTOMIZATION'. I understand the assembler sourcecode from the sample, and I've made my own version with minor modifications. Now I would like to assemble it in CMS. Can anyone tell me how to do that? Do I just use the ASSEMBLE command? Do I need GLOBAL MACLIB commands, etc.? Thanks, Geert. DISCLAIMER This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you have received this email in error please notify postmas...@vanbreda.be This footnote also confirms that this email has been checked for the presence of viruses. Informatica J.Van Breda Co NV BTW BE 0427 908 174
Re: How do I assemble a CP EXIT ?
Here is what I do: VMFSETUP ZVM CP VMFHLASM OITW2H01 ZVM CP where OITW2H01 is my exit's name. Good Luck. Jim Hughes Consulting Systems Programmer Mainframe Technical Support Group Department of Information Technology State of New Hampshire 27 Hazen Drive Concord, NH 03301 603-271-5586Fax 603.271.1516 Statement of Confidentiality: The contents of this message are confidential. Any unauthorized disclosure, reproduction, use or dissemination (either whole or in part) is prohibited. If you are not the intended recipient of this message, please notify the sender immediately and delete the message from your system. -Original Message- From: The IBM z/VM Operating System [mailto:IBMVM@LISTSERV.UARK.EDU] On Behalf Of Dieltiens Geert Sent: Monday, May 02, 2011 4:17 PM To: IBMVM@LISTSERV.UARK.EDU Subject: How do I assemble a CP EXIT ? Hi all, I'm trying to assemble the JAMSAMA sample for CP EXIT 1200 (for CP DIAL), from z/VM manual 'CP EXIT CUSTOMIZATION'. I understand the assembler sourcecode from the sample, and I've made my own version with minor modifications. Now I would like to assemble it in CMS. Can anyone tell me how to do that? Do I just use the ASSEMBLE command? Do I need GLOBAL MACLIB commands, etc.? Thanks, Geert. DISCLAIMER This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you have received this email in error please notify postmas...@vanbreda.be This footnote also confirms that this email has been checked for the presence of viruses. Informatica J.Van Breda Co NV BTW BE 0427 908 174
Re: How do I assemble a CP EXIT ?
You need the High Level Assembler product (extra cost) or the Dignus assembler (also extra cost) to build the module. The MACLIB statements are documented in the discussion of the exit. The old F-level ASSEMBLE command cannot build current CP modules correctly.
Re: How do I assemble a CP EXIT ?
Jim, I tried that and the assembly worked, with no errors. I'll try to use the TEXT module as a CP EXIT tomorrow. Thanks! Bye, Geert. -Original Message- From: The IBM z/VM Operating System [mailto:IBMVM@LISTSERV.UARK.EDU] On Behalf Of Hughes, Jim Sent: maandag 2 mei 2011 22:30 To: IBMVM@LISTSERV.UARK.EDU Subject: Re: How do I assemble a CP EXIT ? Here is what I do: VMFSETUP ZVM CP VMFHLASM OITW2H01 ZVM CP where OITW2H01 is my exit's name. Good Luck. Jim Hughes Consulting Systems Programmer Mainframe Technical Support Group Department of Information Technology State of New Hampshire 27 Hazen Drive Concord, NH 03301 603-271-5586Fax 603.271.1516 Statement of Confidentiality: The contents of this message are confidential. Any unauthorized disclosure, reproduction, use or dissemination (either whole or in part) is prohibited. If you are not the intended recipient of this message, please notify the sender immediately and delete the message from your system. -Original Message- From: The IBM z/VM Operating System [mailto:IBMVM@LISTSERV.UARK.EDU] On Behalf Of Dieltiens Geert Sent: Monday, May 02, 2011 4:17 PM To: IBMVM@LISTSERV.UARK.EDU Subject: How do I assemble a CP EXIT ? Hi all, I'm trying to assemble the JAMSAMA sample for CP EXIT 1200 (for CP DIAL), from z/VM manual 'CP EXIT CUSTOMIZATION'. I understand the assembler sourcecode from the sample, and I've made my own version with minor modifications. Now I would like to assemble it in CMS. Can anyone tell me how to do that? Do I just use the ASSEMBLE command? Do I need GLOBAL MACLIB commands, etc.? Thanks, Geert. DISCLAIMER This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you have received this email in error please notify postmas...@vanbreda.be This footnote also confirms that this email has been checked for the presence of viruses. Informatica J.Van Breda Co NV BTW BE 0427 908 174
Re: How do I assemble a CP EXIT ?
Hi, Geert. If Jim's instructions worked for you, that means that your site has the HLASM licensed and installed! You should be able to follow the rest of the instruction and load your CP EXITlet us know if that works. DJ On 05/02/2011 03:42 PM, Dieltiens Geert wrote: Jim, I tried that and the assembly worked, with no errors. I'll try to use the TEXT module as a CP EXIT tomorrow. Thanks! Bye, Geert. -Original Message- From: The IBM z/VM Operating System [mailto:IBMVM@LISTSERV.UARK.EDU] On Behalf Of Hughes, Jim Sent: maandag 2 mei 2011 22:30 To: IBMVM@LISTSERV.UARK.EDU Subject: Re: How do I assemble a CP EXIT ? Here is what I do: VMFSETUP ZVM CP VMFHLASM OITW2H01 ZVM CP where OITW2H01 is my exit's name. Good Luck. Jim Hughes Consulting Systems Programmer Mainframe Technical Support Group Department of Information Technology State of New Hampshire 27 Hazen Drive Concord, NH 03301 603-271-5586Fax 603.271.1516 Statement of Confidentiality: The contents of this message are confidential. Any unauthorized disclosure, reproduction, use or dissemination (either whole or in part) is prohibited. If you are not the intended recipient of this message, please notify the sender immediately and delete the message from your system. -Original Message- From: The IBM z/VM Operating System [mailto:IBMVM@LISTSERV.UARK.EDU] On Behalf Of Dieltiens Geert Sent: Monday, May 02, 2011 4:17 PM To: IBMVM@LISTSERV.UARK.EDU Subject: How do I assemble a CP EXIT ? Hi all, I'm trying to assemble the JAMSAMA sample for CP EXIT 1200 (for CP DIAL), from z/VM manual 'CP EXIT CUSTOMIZATION'. I understand the assembler sourcecode from the sample, and I've made my own version with minor modifications. Now I would like to assemble it in CMS. Can anyone tell me how to do that? Do I just use the ASSEMBLE command? Do I need GLOBAL MACLIB commands, etc.? Thanks, Geert. DISCLAIMER This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you have received this email in error please notify postmas...@vanbreda.be This footnote also confirms that this email has been checked for the presence of viruses. Informatica J.Van Breda Co NV BTW BE 0427 908 174 -- Dave Jones V/Soft Software www.vsoft-software.com Houston, TX 281.578.7544
