Re: PROP RTABLE and HCPCRC8082I
Agreed.Thanks all for your input. Frank M. Ramaekers Jr. -Original Message- From: The IBM z/VM Operating System [mailto:ib...@listserv.uark.edu] On Behalf Of Rob van der Heij Sent: Wednesday, September 08, 2010 4:29 PM To: IBMVM@LISTSERV.UARK.EDU Subject: Re: PROP RTABLE and HCPCRC8082I On Wed, Sep 8, 2010 at 10:59 PM, Tom Huegel tehue...@gmail.com wrote: But will this help Frank get started? I would think so. I took the effort of actually coding the RTABLE and showed that it works, and I pointed out the difference with his RTABLE (that his original post wanted the full 80 chars to consist only of that message) The discussion on whether that was obvious from the documentation is probably less interesting. | Rob _ This message contains information which is privileged and confidential and is solely for the use of the intended recipient. If you are not the intended recipient, be aware that any review, disclosure, copying, distribution, or use of the contents of this message is strictly prohibited. If you have received this in error, please destroy it immediately and notify us at privacy...@ailife.com.
Re: PROP RTABLE and HCPCRC8082I
Tried the '/', tried a blank type (and types 1-8) and righ justifying start/end columns. Still no dice. Frank M. Ramaekers Jr. From: The IBM z/VM Operating System [mailto:ib...@listserv.uark.edu] On Behalf Of Tom Huegel Sent: Friday, September 03, 2010 10:49 AM To: IBMVM@LISTSERV.UARK.EDU Subject: Re: PROP RTABLE and HCPCRC8082I try a '/' at the end of the message .. also for testing at least leave the 'type' column blank. and I don't know for sure, but I always right justify my start and end columns. On Fri, Sep 3, 2010 at 8:32 AM, Frank M. Ramaekers framaek...@ailife.com wrote: I can't seem to get HCPCRC8082I entry in PROP RTABLE to work. I've used message class 1-3 and start column of 1 and end column of 80 to try to get this to work. Anyone see anything wrong? * --- --- -- *TS E T UNAP *EC C Y SOCA *XO O P EDTR *TL L E RENM * --- --- -- * --- --- -- * SEND IMPORTANT MESSAGES TO MAINT * --- --- -- /HCPCRC8082I 1 80 1 TELL MAINT /HCPCRC8083I 1 80 1 TELL MAINT Frank M. Ramaekers Jr. Systems Programmer MCP, MCP+I, MCSE RHCE American Income Life Insurance Co. Phone: (254)761-6649 1200 Wooded Acres Dr. Fax: (254)741-5777 Waco, Texas 76701 _ This message contains information which is privileged and confidential and is solely for the use of the intended recipient. If you are not the intended recipient, be aware that any review, disclosure, copying, distribution, or use of the contents of this message is strictly prohibited. If you have received this in error, please destroy it immediately and notify us at privacy...@ailife.com. _ This message contains information which is privileged and confidential and is solely for the use of the intended recipient. If you are not the intended recipient, be aware that any review, disclosure, copying, distribution, or use of the contents of this message is strictly prohibited. If you have received this in error, please destroy it immediately and notify us at privacy...@ailife.com.
Re: PROP RTABLE and HCPCRC8082I
Tried changing it from TELL MAINT to TELLMAIN (for an EXEC that invokes both TELL MAINT and MSG MAINT). Still can't get it to work. (I already have a similar EXEC that works.) Frank M. Ramaekers Jr. From: The IBM z/VM Operating System [mailto:ib...@listserv.uark.edu] On Behalf Of Kris Buelens Sent: Friday, September 03, 2010 2:25 PM To: IBMVM@LISTSERV.UARK.EDU Subject: Re: PROP RTABLE and HCPCRC8082I And, I hope you have your own TELL EXEC on OPERATOR's 191 disk: the normal TELL EXEC will not forward the message that PROP intercepts to MAINT. PROP passes other argulents to the action routine (TELL in your case) and it places the message text and the parameter (here MAINT) on the stack. 2010/9/3 Tom Huegel tehue...@gmail.com try a '/' at the end of the message .. also for testing at least leave the 'type' column blank. and I don't know for sure, but I always right justify my start and end columns. On Fri, Sep 3, 2010 at 8:32 AM, Frank M. Ramaekers framaek...@ailife.com wrote: I can't seem to get HCPCRC8082I entry in PROP RTABLE to work. I've used message class 1-3 and start column of 1 and end column of 80 to try to get this to work. Anyone see anything wrong? * --- --- -- *TS E T UNAP *EC C Y SOCA *XO O P EDTR *TL L E RENM * --- --- -- * --- --- -- * SEND IMPORTANT MESSAGES TO MAINT * --- --- -- /HCPCRC8082I 1 80 1 TELL MAINT /HCPCRC8083I 1 80 1 TELL MAINT Frank M. Ramaekers Jr. Systems Programmer MCP, MCP+I, MCSE RHCE American Income Life Insurance Co. Phone: (254)761-6649 1200 Wooded Acres Dr. Fax: (254)741-5777 Waco, Texas 76701 _ This message contains information which is privileged and confidential and is solely for the use of the intended recipient. If you are not the intended recipient, be aware that any review, disclosure, copying, distribution, or use of the contents of this message is strictly prohibited. If you have received this in error, please destroy it immediately and notify us at privacy...@ailife.com. -- Kris Buelens, IBM Belgium, VM customer support _ This message contains information which is privileged and confidential and is solely for the use of the intended recipient. If you are not the intended recipient, be aware that any review, disclosure, copying, distribution, or use of the contents of this message is strictly prohibited. If you have received this in error, please destroy it immediately and notify us at privacy...@ailife.com.
Re: PROP RTABLE and HCPCRC8082I
On Wed, Sep 8, 2010 at 9:02 PM, Frank M. Ramaekers framaek...@ailife.com wrote: Tried changing it from “TELL MAINT” to “TELLMAIN” (for an EXEC that invokes both TELL MAINT and MSG MAINT). Still can’t get it to work. (I already have a similar EXEC that works.) You sure it's a type 1 message and not 3 ? My last resort is to have a catch all others action routine that displays the characteristics of the message. | Rob
Re: PROP RTABLE and HCPCRC8082I
On Fri, Sep 3, 2010 at 5:32 PM, Frank M. Ramaekers framaek...@ailife.com wrote: I can’t seem to get HCPCRC8082I entry in PROP RTABLE to work. I’ve used message class 1-3 and start column of 1 and end column of 80 to try to get this to work. Anyone see anything wrong? I think your column 80 is wrong... it works for me: tell op cmd acnt all Ready; T=0.04/0.06 20:30:25 Command complete TellRob: CP CP RVDHEIJ RVDHEIJ 03 OPERATOR RVDHEIJ RSCS PROP TellRob:20:30:25 HCPCRC8083I Accounting record threshold has userid MAINT. Currently 0140 records are enqueued. TellRob: The routine table entries are these: /HCPCRC8082I/ 10 20 3 TELLROB /HCPCRC8083I/ 10 20 3 TELLROB
Re: PROP RTABLE and HCPCRC8082I
If it helps, we see that message regularly as we run EREP each night. CA's VM:Operator displays the IUCV class when logging the record to its SYSLOG file. It displayed as a type *3 message: 00:25:12 OPERATOR *3 HCPCRC8082I Accounting records are accumulating for user ... Note also that you are looking in column 1, but Rob is catching the message in column 10. You need to skip over the CP timestamp on the message, beginning the match in column 10. Mike Walter Hewitt Associates The opinions expressed herein are mine alone, not my employer's. Frank M. Ramaekers framaek...@ailife.com Sent by: The IBM z/VM Operating System IBMVM@LISTSERV.UARK.EDU 09/08/2010 02:14 PM Please respond to The IBM z/VM Operating System IBMVM@LISTSERV.UARK.EDU To IBMVM@LISTSERV.UARK.EDU cc Subject Re: PROP RTABLE and HCPCRC8082I I've tried 1-7 for the message type and I cannot trap it (for some reason). Frank M. Ramaekers Jr. -Original Message- From: The IBM z/VM Operating System [mailto:ib...@listserv.uark.edu] On Behalf Of Rob van der Heij Sent: Wednesday, September 08, 2010 2:09 PM To: IBMVM@LISTSERV.UARK.EDU Subject: Re: PROP RTABLE and HCPCRC8082I On Wed, Sep 8, 2010 at 9:02 PM, Frank M. Ramaekers framaek...@ailife.com wrote: Tried changing it from TELL MAINT to TELLMAIN (for an EXEC that invokes both TELL MAINT and MSG MAINT). Still can't get it to work. (I already have a similar EXEC that works.) You sure it's a type 1 message and not 3 ? My last resort is to have a catch all others action routine that displays the characteristics of the message. | Rob _ This message contains information which is privileged and confidential and is solely for the use of the intended recipient. If you are not the intended recipient, be aware that any review, disclosure, copying, distribution, or use of the contents of this message is strictly prohibited. If you have received this in error, please destroy it immediately and notify us at privacy...@ailife.com. The information contained in this e-mail and any accompanying documents may contain information that is confidential or otherwise protected from disclosure. If you are not the intended recipient of this message, or if this message has been addressed to you in error, please immediately alert the sender by reply e-mail and then delete this message, including any attachments. Any dissemination, distribution or other use of the contents of this message by anyone other than the intended recipient is strictly prohibited. All messages sent to and from this e-mail address may be monitored as permitted by applicable law and regulations to ensure compliance with our internal policies and to protect our business. E-mails are not secure and cannot be guaranteed to be error free as they can be intercepted, amended, lost or destroyed, or contain viruses. You are deemed to have accepted these risks if you communicate with us by e-mail.
Re: PROP RTABLE and HCPCRC8082I
Is that *3 the IUCV message type? Async CP messages, CP responses, consile I/O. The same numerology has to be handled if you use the STARMSG stage in Pipelines. Have fun! -- R; On Wed, Sep 8, 2010 at 15:54, Mike Walter mike.wal...@hewitt.com wrote: If it helps, we see that message regularly as we run EREP each night. CA's VM:Operator displays the IUCV class when logging the record to its SYSLOG file. It displayed as a type *3 message: 00:25:12 OPERATOR *3 HCPCRC8082I Accounting records are accumulating for user ... Note also that you are looking in column 1, but Rob is catching the message in column 10. You need to skip over the CP timestamp on the message, beginning the match in column 10. Mike Walter Hewitt Associates The opinions expressed herein are mine alone, not my employer's. Frank M. Ramaekers framaek...@ailife.com Sent by: The IBM z/VM Operating System IBMVM@LISTSERV.UARK.EDU 09/08/2010 02:14 PM Please respond to The IBM z/VM Operating System IBMVM@LISTSERV.UARK.EDU To IBMVM@LISTSERV.UARK.EDU cc Subject Re: PROP RTABLE and HCPCRC8082I I've tried 1-7 for the message type and I cannot trap it (for some reason). Frank M. Ramaekers Jr. -Original Message- From: The IBM z/VM Operating System [mailto:ib...@listserv.uark.edu] On Behalf Of Rob van der Heij Sent: Wednesday, September 08, 2010 2:09 PM To: IBMVM@LISTSERV.UARK.EDU Subject: Re: PROP RTABLE and HCPCRC8082I On Wed, Sep 8, 2010 at 9:02 PM, Frank M. Ramaekers framaek...@ailife.com wrote: Tried changing it from TELL MAINT to TELLMAIN (for an EXEC that invokes both TELL MAINT and MSG MAINT). Still can't get it to work. (I already have a similar EXEC that works.) You sure it's a type 1 message and not 3 ? My last resort is to have a catch all others action routine that displays the characteristics of the message. | Rob _ This message contains information which is privileged and confidential and is solely for the use of the intended recipient. If you are not the intended recipient, be aware that any review, disclosure, copying, distribution, or use of the contents of this message is strictly prohibited. If you have received this in error, please destroy it immediately and notify us at privacy...@ailife.com. The information contained in this e-mail and any accompanying documents may contain information that is confidential or otherwise protected from disclosure. If you are not the intended recipient of this message, or if this message has been addressed to you in error, please immediately alert the sender by reply e-mail and then delete this message, including any attachments. Any dissemination, distribution or other use of the contents of this message by anyone other than the intended recipient is strictly prohibited. All messages sent to and from this e-mail address may be monitored as permitted by applicable law and regulations to ensure compliance with our internal policies and to protect our business. E-mails are not secure and cannot be guaranteed to be error free as they can be intercepted, amended, lost or destroyed, or contain viruses. You are deemed to have accepted these risks if you communicate with us by e-mail.
Re: PROP RTABLE and HCPCRC8082I
Wish PROP would record the type in the log files. Frank M. Ramaekers Jr. -Original Message- From: The IBM z/VM Operating System [mailto:ib...@listserv.uark.edu] On Behalf Of Mike Walter Sent: Wednesday, September 08, 2010 2:55 PM To: IBMVM@LISTSERV.UARK.EDU Subject: Re: PROP RTABLE and HCPCRC8082I If it helps, we see that message regularly as we run EREP each night. CA's VM:Operator displays the IUCV class when logging the record to its SYSLOG file. It displayed as a type *3 message: 00:25:12 OPERATOR *3 HCPCRC8082I Accounting records are accumulating for user ... Note also that you are looking in column 1, but Rob is catching the message in column 10. You need to skip over the CP timestamp on the message, beginning the match in column 10. Mike Walter Hewitt Associates The opinions expressed herein are mine alone, not my employer's. Frank M. Ramaekers framaek...@ailife.com Sent by: The IBM z/VM Operating System IBMVM@LISTSERV.UARK.EDU 09/08/2010 02:14 PM Please respond to The IBM z/VM Operating System IBMVM@LISTSERV.UARK.EDU To IBMVM@LISTSERV.UARK.EDU cc Subject Re: PROP RTABLE and HCPCRC8082I I've tried 1-7 for the message type and I cannot trap it (for some reason). Frank M. Ramaekers Jr. -Original Message- From: The IBM z/VM Operating System [mailto:ib...@listserv.uark.edu] On Behalf Of Rob van der Heij Sent: Wednesday, September 08, 2010 2:09 PM To: IBMVM@LISTSERV.UARK.EDU Subject: Re: PROP RTABLE and HCPCRC8082I On Wed, Sep 8, 2010 at 9:02 PM, Frank M. Ramaekers framaek...@ailife.com wrote: Tried changing it from TELL MAINT to TELLMAIN (for an EXEC that invokes both TELL MAINT and MSG MAINT). Still can't get it to work. (I already have a similar EXEC that works.) You sure it's a type 1 message and not 3 ? My last resort is to have a catch all others action routine that displays the characteristics of the message. | Rob _ This message contains information which is privileged and confidential and is solely for the use of the intended recipient. If you are not the intended recipient, be aware that any review, disclosure, copying, distribution, or use of the contents of this message is strictly prohibited. If you have received this in error, please destroy it immediately and notify us at privacy...@ailife.com. The information contained in this e-mail and any accompanying documents may contain information that is confidential or otherwise protected from disclosure. If you are not the intended recipient of this message, or if this message has been addressed to you in error, please immediately alert the sender by reply e-mail and then delete this message, including any attachments. Any dissemination, distribution or other use of the contents of this message by anyone other than the intended recipient is strictly prohibited. All messages sent to and from this e-mail address may be monitored as permitted by applicable law and regulations to ensure compliance with our internal policies and to protect our business. E-mails are not secure and cannot be guaranteed to be error free as they can be intercepted, amended, lost or destroyed, or contain viruses. You are deemed to have accepted these risks if you communicate with us by e-mail. _ This message contains information which is privileged and confidential and is solely for the use of the intended recipient. If you are not the intended recipient, be aware that any review, disclosure, copying, distribution, or use of the contents of this message is strictly prohibited. If you have received this in error, please destroy it immediately and notify us at privacy...@ailife.com.
Re: PROP RTABLE and HCPCRC8082I
On Wed, Sep 8, 2010 at 10:59 PM, Tom Huegel tehue...@gmail.com wrote: But will this help Frank get started? I would think so. I took the effort of actually coding the RTABLE and showed that it works, and I pointed out the difference with his RTABLE (that his original post wanted the full 80 chars to consist only of that message) The discussion on whether that was obvious from the documentation is probably less interesting. | Rob
Re: PROP RTABLE and HCPCRC8082I
try a '/' at the end of the message .. also for testing at least leave the 'type' column blank. and I don't know for sure, but I always right justify my start and end columns. On Fri, Sep 3, 2010 at 8:32 AM, Frank M. Ramaekers framaek...@ailife.comwrote: I can’t seem to get HCPCRC8082I entry in PROP RTABLE to work. I’ve used message class 1-3 and start column of 1 and end column of 80 to try to get this to work. Anyone see anything wrong? * --- --- -- *TS E T UNAP *EC C Y SOCA *XO O P EDTR *TL L E RENM * --- --- -- * --- --- -- * SEND IMPORTANT MESSAGES TO MAINT * --- --- -- /HCPCRC8082I 1 80 1 TELL MAINT /HCPCRC8083I 1 80 1 TELL MAINT Frank M. Ramaekers Jr. Systems Programmer MCP, MCP+I, MCSE RHCE American Income Life Insurance Co. Phone: (254)761-6649 1200 Wooded Acres Dr. Fax: (254)741-5777 Waco, Texas 76701 _ This message contains information which is privileged and confidential and is solely for the use of the intended recipient. If you are not the intended recipient, be aware that any review, disclosure, copying, distribution, or use of the contents of this message is strictly prohibited. If you have received this in error, please destroy it immediately and notify us at privacy...@ailife.com.
Re: PROP RTABLE and HCPCRC8082I
And, I hope you have your own TELL EXEC on OPERATOR's 191 disk: the normal TELL EXEC will not forward the message that PROP intercepts to MAINT. PROP passes other argulents to the action routine (TELL in your case) and it places the message text and the parameter (here MAINT) on the stack. 2010/9/3 Tom Huegel tehue...@gmail.com try a '/' at the end of the message .. also for testing at least leave the 'type' column blank. and I don't know for sure, but I always right justify my start and end columns. On Fri, Sep 3, 2010 at 8:32 AM, Frank M. Ramaekers framaek...@ailife.comwrote: I can’t seem to get HCPCRC8082I entry in PROP RTABLE to work. I’ve used message class 1-3 and start column of 1 and end column of 80 to try to get this to work. Anyone see anything wrong? * --- --- -- *TS E T UNAP *EC C Y SOCA *XO O P EDTR *TL L E RENM * --- --- -- * --- --- -- * SEND IMPORTANT MESSAGES TO MAINT * --- --- -- /HCPCRC8082I 1 80 1 TELL MAINT /HCPCRC8083I 1 80 1 TELL MAINT Frank M. Ramaekers Jr. Systems Programmer MCP, MCP+I, MCSE RHCE American Income Life Insurance Co. Phone: (254)761-6649 1200 Wooded Acres Dr. Fax: (254)741-5777 Waco, Texas 76701 _ This message contains information which is privileged and confidential and is solely for the use of the intended recipient. If you are not the intended recipient, be aware that any review, disclosure, copying, distribution, or use of the contents of this message is strictly prohibited. If you have received this in error, please destroy it immediately and notify us at privacy...@ailife.com. -- Kris Buelens, IBM Belgium, VM customer support
