Re: Sending messages to z/OS from z/VM using RSCS
On Monday, 06/06/2011 at 02:31 EDT, "Hughes, Jim" wrote: > How do I use TSO to send the message to z/VM operator at node DIS3081? TRANSMIT (XMIT). It's been a while, but IIRC the basics are: XMIT DIS3081.OPERATOR MSG will prompt the issuer. XMIT DIS3081.OPERATOR MSGFILE(ddname) XMIT DIS3081.OPERATOR MSGDATASET(dsname) will send a file as a message. If you use TERMINAL, FILE, or DSNAME options, then the input is sent as a file to the target user's RDR. (Back when I used TSO on a regular basis, TRANSMIT hadn't been invented, yet.) Alan Altmark z/VM and Linux on System z Consultant IBM System Lab Services and Training ibm.com/systems/services/labservices office: 607.429.3323 mobile; 607.321.7556 alan_altm...@us.ibm.com IBM Endicott
Re: Sending messages to z/OS from z/VM using RSCS
Alan, How do I use TSO to send the message to z/VM operator at node DIS3081? Jim Hughes Consulting Systems Programmer Mainframe Technical Support Group Department of Information Technology State of New Hampshire 27 Hazen Drive Concord, NH 03301 603-271-5586Fax 603.271.1516 Statement of Confidentiality: The contents of this message are confidential. Any unauthorized disclosure, reproduction, use or dissemination (either whole or in part) is prohibited. If you are not the intended recipient of this message, please notify the sender immediately and delete the message from your system. ==>-Original Message- ==>From: The IBM z/VM Operating System [mailto:IBMVM@LISTSERV.UARK.EDU] On ==>Behalf Of Alan Altmark ==>Sent: Monday, June 06, 2011 2:25 PM ==>To: IBMVM@LISTSERV.UARK.EDU ==>Subject: Re: Sending messages to z/OS from z/VM using RSCS ==> ==>On Monday, 06/06/2011 at 12:41 EDT, "Hughes, Jim" ==> ==>wrote: ==>> I am able to send messages to a z/OS TSO userid using the RSCS command ==>> MSG from z/VM. ==>> ==>> How would the TSO userid send a message to me on the z/VM node? ==>> ==>> z/VM node is DIS3081. Z/OS node is MVSSYS. ==>> ==>> Would the z/OS TSO userid be able to issue commands to the z/VM system ==>> or would PROP be involved? ==> ==>No, the TSO user cannot issue VM commands directly. All they can do is ==>issue a message to (for example, OPERATOR) on the the target system. ==>PROP ==>(or whatever automation you have) would see the message and the origin ==>information, and decide what to do: issue a command, reject, forward, ==>whatever. That's up to the action routine. ==> ==>Alan Altmark ==> ==>z/VM and Linux on System z Consultant ==>IBM System Lab Services and Training ==>ibm.com/systems/services/labservices ==>office: 607.429.3323 ==>mobile; 607.321.7556 ==>alan_altm...@us.ibm.com ==>IBM Endicott
Re: Sending messages to z/OS from z/VM using RSCS
On Monday, 06/06/2011 at 12:41 EDT, "Hughes, Jim" wrote: > I am able to send messages to a z/OS TSO userid using the RSCS command > MSG from z/VM. > > How would the TSO userid send a message to me on the z/VM node? > > z/VM node is DIS3081. Z/OS node is MVSSYS. > > Would the z/OS TSO userid be able to issue commands to the z/VM system > or would PROP be involved? No, the TSO user cannot issue VM commands directly. All they can do is issue a message to (for example, OPERATOR) on the the target system. PROP (or whatever automation you have) would see the message and the origin information, and decide what to do: issue a command, reject, forward, whatever. That's up to the action routine. Alan Altmark z/VM and Linux on System z Consultant IBM System Lab Services and Training ibm.com/systems/services/labservices office: 607.429.3323 mobile; 607.321.7556 alan_altm...@us.ibm.com IBM Endicott
Re: Sending messages to z/OS from z/VM using RSCS
So... where does the command issuer run... e.g. as a TSO user, as a batch job, other? If they have the proper privilege on z/OS, they could issue the JES2 command: $Nn#;nodename userid 'message text here' Where the '#' is the JES2 node number of your target z/VM system. The message would appear at the target as a message sent by RSCS (which can easily be trapped by PROP or other automation tools). We've used that technique for years here in a sort of cludge. A home-built VM:Operator "RO VMOPER" macro accepts a command for z/OS, sends the command via RSCS over NJE to z/OS (CP SMSG RSCS MSG mvs_nodename SYSTEM arguments), where they are trapped by z/OS automation, tested for authorization, executed as a z/OS operator command (NETVIEW is heavily involved), and the command responses trapped and sent back to z/VM using the $NM# command as a if they were a rexx stem. The "RO VMOPER" macro had been waiting for the reply, traps the "stem", and does what it is told to do. Someday we'll get a "round tuit" and re-write that cludge to use something more modern (like rexx sockets perhaps). Mike Walter Aon Corporation The opinions expressed herein are mine alone, not my employer's. "Hughes, Jim" Sent by: "The IBM z/VM Operating System" 06/06/2011 01:09 PM Please respond to "The IBM z/VM Operating System" To IBMVM@LISTSERV.UARK.EDU cc Subject Re: Sending messages to z/OS from z/VM using RSCS I am looking for something which sends a message our z/VM prop machine which in turn executes a rexx procedure. Jim Hughes Consulting Systems Programmer Mainframe Technical Support Group Department of Information Technology State of New Hampshire 27 Hazen Drive Concord, NH 03301 603-271-5586Fax 603.271.1516 Statement of Confidentiality: The contents of this message are confidential. Any unauthorized disclosure, reproduction, use or dissemination (either whole or in part) is prohibited. If you are not the intended recipient of this message, please notify the sender immediately and delete the message from your system. ==>-Original Message- ==>From: The IBM z/VM Operating System [mailto:IBMVM@LISTSERV.UARK.EDU] On ==>Behalf Of Mike Walter ==>Sent: Monday, June 06, 2011 2:06 PM ==>To: IBMVM@LISTSERV.UARK.EDU ==>Subject: Re: Sending messages to z/OS from z/VM using RSCS ==> ==>Jim, ==> ==>From TSO you can use: XMIT (or TRANSMIT) node.userid ==>That places you into EDIT on a file permitting multiple lines to be ==>entered, after which you press PF3 to send the file. ==>The message appears as a reader file on the node.userid on the target VM ==>system. ==> ==> ==>See: ==>http://publib.boulder.ibm.com/infocenter/zos/v1r11/index.jsp?topic=/c om.i ==>bm.zos.r11.ikjc500/transsyn.htm ==>If there's some other need not met by that link feel free to ask. ==> ==>Mike Walter ==>Aon Corporation ==>The opinions expressed herein are mine alone, not my employer's. ==> ==> ==> ==> ==>"Hughes, Jim" ==> ==>Sent by: "The IBM z/VM Operating System" ==>06/06/2011 11:40 AM ==>Please respond to ==>"The IBM z/VM Operating System" ==> ==> ==> ==>To ==>IBMVM@LISTSERV.UARK.EDU ==>cc ==> ==>Subject ==>Sending messages to z/OS from z/VM using RSCS ==> ==> ==> ==> ==> ==> ==>I am able to send messages to a z/OS TSO userid using the RSCS command ==>MSG from z/VM. ==> ==>How would the TSO userid send a message to me on the z/VM node? ==> ==>z/VM node is DIS3081. Z/OS node is MVSSYS. ==> ==>Would the z/OS TSO userid be able to issue commands to the z/VM system ==>or would PROP be involved? ==> ==>TIA ==> ==> ==>Jim Hughes ==>Consulting Systems Programmer ==>Mainframe Technical Support Group ==>Department of Information Technology ==>State of New Hampshire ==>27 Hazen Drive ==>Concord, NH 03301 ==>603-271-5586Fax 603.271.1516 ==> ==>Statement of Confidentiality: The contents of this message are ==>confidential. Any unauthorized disclosure, reproduction, use or ==>dissemination (either whole or in part) is prohibited. If you are not ==>the intended recipient of this message, please notify the sender ==>immediately and delete the message from your system. ==> ==> ==> ==> ==> ==> ==>The information contained in this e-mail and any accompanying documents ==>may contain information that is confidential or otherwise protected from ==>disclosure. If you are not the intended recipient of this message, or if ==>this message has been addressed to you in error, please immediately alert ==>the sender by reply e-mail and then delete this message, including any ==>attachmen
Re: Sending messages to z/OS from z/VM using RSCS
This receives the message in z/VM. I need to send it from z/OS first. This is where I am stumped. I have a few replies which I've not tested (yet). Jim Hughes Consulting Systems Programmer Mainframe Technical Support Group Department of Information Technology State of New Hampshire 27 Hazen Drive Concord, NH 03301 603-271-5586Fax 603.271.1516 Statement of Confidentiality: The contents of this message are confidential. Any unauthorized disclosure, reproduction, use or dissemination (either whole or in part) is prohibited. If you are not the intended recipient of this message, please notify the sender immediately and delete the message from your system. ==>-Original Message- ==>From: The IBM z/VM Operating System [mailto:IBMVM@LISTSERV.UARK.EDU] On ==>Behalf Of Tom Paul ==>Sent: Monday, June 06, 2011 2:16 PM ==>To: IBMVM@LISTSERV.UARK.EDU ==>Subject: Re: Sending messages to z/OS from z/VM using RSCS ==> ==>Please CMS Pipe with starmsg! If u need further, please contact me ==>privately. ==> ==> ==>Regards, ==>Tom ==> ==>-Original Message- ==>From: The IBM z/VM Operating System [mailto:IBMVM@LISTSERV.UARK.EDU] On ==>Behalf Of Hughes, Jim ==>Sent: Monday, June 06, 2011 2:09 PM ==>To: IBMVM@LISTSERV.UARK.EDU ==>Subject: Re: Sending messages to z/OS from z/VM using RSCS ==> ==>I am looking for something which sends a message our z/VM prop machine ==>which in turn executes a rexx procedure. ==> ==> ==>Jim Hughes ==>Consulting Systems Programmer ==>Mainframe Technical Support Group ==>Department of Information Technology ==>State of New Hampshire ==>27 Hazen Drive ==>Concord, NH 03301 ==>603-271-5586Fax 603.271.1516 ==> ==>Statement of Confidentiality: The contents of this message are ==>confidential. Any unauthorized disclosure, reproduction, use or ==>dissemination (either whole or in part) is prohibited. If you are not ==>the intended recipient of this message, please notify the sender ==>immediately and delete the message from your system. ==> ==> ==>==>-Original Message- ==>==>From: The IBM z/VM Operating System [mailto:IBMVM@LISTSERV.UARK.EDU] ==>On ==>==>Behalf Of Mike Walter ==>==>Sent: Monday, June 06, 2011 2:06 PM ==>==>To: IBMVM@LISTSERV.UARK.EDU ==>==>Subject: Re: Sending messages to z/OS from z/VM using RSCS ==>==> ==>==>Jim, ==>==> ==>==>From TSO you can use: XMIT (or TRANSMIT) node.userid ==>==>That places you into EDIT on a file permitting multiple lines to be ==>==>entered, after which you press PF3 to send the file. ==>==>The message appears as a reader file on the node.userid on the target ==>VM ==>==>system. ==>==> ==>==> ==>==>See: ==>==>http://publib.boulder.ibm.com/infocenter/zos/v1r11/index.jsp?topic =/c ==>om.i ==>==>bm.zos.r11.ikjc500/transsyn.htm ==>==>If there's some other need not met by that link feel free to ask. ==>==> ==>==>Mike Walter ==>==>Aon Corporation ==>==>The opinions expressed herein are mine alone, not my employer's. ==>==> ==>==> ==>==> ==>==> ==>==>"Hughes, Jim" ==>==> ==>==>Sent by: "The IBM z/VM Operating System" ==>==>06/06/2011 11:40 AM ==>==>Please respond to ==>==>"The IBM z/VM Operating System" ==>==> ==>==> ==>==> ==>==>To ==>==>IBMVM@LISTSERV.UARK.EDU ==>==>cc ==>==> ==>==>Subject ==>==>Sending messages to z/OS from z/VM using RSCS ==>==> ==>==> ==>==> ==>==> ==>==> ==>==> ==>==>I am able to send messages to a z/OS TSO userid using the RSCS ==>command ==>==>MSG from z/VM. ==>==> ==>==>How would the TSO userid send a message to me on the z/VM node? ==>==> ==>==>z/VM node is DIS3081. Z/OS node is MVSSYS. ==>==> ==>==>Would the z/OS TSO userid be able to issue commands to the z/VM ==>system ==>==>or would PROP be involved? ==>==> ==>==>TIA ==>==> ==>==> ==>==>Jim Hughes ==>==>Consulting Systems Programmer ==>==>Mainframe Technical Support Group ==>==>Department of Information Technology ==>==>State of New Hampshire ==>==>27 Hazen Drive ==>==>Concord, NH 03301 ==>==>603-271-5586Fax 603.271.1516 ==>==> ==>==>Statement of Confidentiality: The contents of this message are ==>==>confidential. Any unauthorized disclosure, reproduction, use or ==>==>dissemination (either whole or in part) is prohibited. If you are not ==>==>the intended recipient of this message, please notify the sender ==>==>immediately and delete the message from your
Re: Sending messages to z/OS from z/VM using RSCS
Please CMS Pipe with starmsg! If u need further, please contact me privately. Regards, Tom -Original Message- From: The IBM z/VM Operating System [mailto:IBMVM@LISTSERV.UARK.EDU] On Behalf Of Hughes, Jim Sent: Monday, June 06, 2011 2:09 PM To: IBMVM@LISTSERV.UARK.EDU Subject: Re: Sending messages to z/OS from z/VM using RSCS I am looking for something which sends a message our z/VM prop machine which in turn executes a rexx procedure. Jim Hughes Consulting Systems Programmer Mainframe Technical Support Group Department of Information Technology State of New Hampshire 27 Hazen Drive Concord, NH 03301 603-271-5586Fax 603.271.1516 Statement of Confidentiality: The contents of this message are confidential. Any unauthorized disclosure, reproduction, use or dissemination (either whole or in part) is prohibited. If you are not the intended recipient of this message, please notify the sender immediately and delete the message from your system. ==>-Original Message- ==>From: The IBM z/VM Operating System [mailto:IBMVM@LISTSERV.UARK.EDU] On ==>Behalf Of Mike Walter ==>Sent: Monday, June 06, 2011 2:06 PM ==>To: IBMVM@LISTSERV.UARK.EDU ==>Subject: Re: Sending messages to z/OS from z/VM using RSCS ==> ==>Jim, ==> ==>From TSO you can use: XMIT (or TRANSMIT) node.userid ==>That places you into EDIT on a file permitting multiple lines to be ==>entered, after which you press PF3 to send the file. ==>The message appears as a reader file on the node.userid on the target VM ==>system. ==> ==> ==>See: ==>http://publib.boulder.ibm.com/infocenter/zos/v1r11/index.jsp?topic=/c om.i ==>bm.zos.r11.ikjc500/transsyn.htm ==>If there's some other need not met by that link feel free to ask. ==> ==>Mike Walter ==>Aon Corporation ==>The opinions expressed herein are mine alone, not my employer's. ==> ==> ==> ==> ==>"Hughes, Jim" ==> ==>Sent by: "The IBM z/VM Operating System" ==>06/06/2011 11:40 AM ==>Please respond to ==>"The IBM z/VM Operating System" ==> ==> ==> ==>To ==>IBMVM@LISTSERV.UARK.EDU ==>cc ==> ==>Subject ==>Sending messages to z/OS from z/VM using RSCS ==> ==> ==> ==> ==> ==> ==>I am able to send messages to a z/OS TSO userid using the RSCS command ==>MSG from z/VM. ==> ==>How would the TSO userid send a message to me on the z/VM node? ==> ==>z/VM node is DIS3081. Z/OS node is MVSSYS. ==> ==>Would the z/OS TSO userid be able to issue commands to the z/VM system ==>or would PROP be involved? ==> ==>TIA ==> ==> ==>Jim Hughes ==>Consulting Systems Programmer ==>Mainframe Technical Support Group ==>Department of Information Technology ==>State of New Hampshire ==>27 Hazen Drive ==>Concord, NH 03301 ==>603-271-5586Fax 603.271.1516 ==> ==>Statement of Confidentiality: The contents of this message are ==>confidential. Any unauthorized disclosure, reproduction, use or ==>dissemination (either whole or in part) is prohibited. If you are not ==>the intended recipient of this message, please notify the sender ==>immediately and delete the message from your system. ==> ==> ==> ==> ==> ==> ==>The information contained in this e-mail and any accompanying documents ==>may contain information that is confidential or otherwise protected from ==>disclosure. If you are not the intended recipient of this message, or if ==>this message has been addressed to you in error, please immediately alert ==>the sender by reply e-mail and then delete this message, including any ==>attachments. Any dissemination, distribution or other use of the contents ==>of this message by anyone other than the intended recipient is strictly ==>prohibited. All messages sent to and from this e-mail address may be ==>monitored as permitted by applicable law and regulations to ensure ==>compliance with our internal policies and to protect our business. E- ==>mails are not secure and cannot be guaranteed to be error free as they ==>can be intercepted, amended, lost or destroyed, or contain viruses. You ==>are deemed to have accepted these risks if you communicate with us by e- ==>mail.
Re: Sending messages to z/OS from z/VM using RSCS
I am looking for something which sends a message our z/VM prop machine which in turn executes a rexx procedure. Jim Hughes Consulting Systems Programmer Mainframe Technical Support Group Department of Information Technology State of New Hampshire 27 Hazen Drive Concord, NH 03301 603-271-5586Fax 603.271.1516 Statement of Confidentiality: The contents of this message are confidential. Any unauthorized disclosure, reproduction, use or dissemination (either whole or in part) is prohibited. If you are not the intended recipient of this message, please notify the sender immediately and delete the message from your system. ==>-Original Message- ==>From: The IBM z/VM Operating System [mailto:IBMVM@LISTSERV.UARK.EDU] On ==>Behalf Of Mike Walter ==>Sent: Monday, June 06, 2011 2:06 PM ==>To: IBMVM@LISTSERV.UARK.EDU ==>Subject: Re: Sending messages to z/OS from z/VM using RSCS ==> ==>Jim, ==> ==>From TSO you can use: XMIT (or TRANSMIT) node.userid ==>That places you into EDIT on a file permitting multiple lines to be ==>entered, after which you press PF3 to send the file. ==>The message appears as a reader file on the node.userid on the target VM ==>system. ==> ==> ==>See: ==>http://publib.boulder.ibm.com/infocenter/zos/v1r11/index.jsp?topic=/c om.i ==>bm.zos.r11.ikjc500/transsyn.htm ==>If there's some other need not met by that link feel free to ask. ==> ==>Mike Walter ==>Aon Corporation ==>The opinions expressed herein are mine alone, not my employer's. ==> ==> ==> ==> ==>"Hughes, Jim" ==> ==>Sent by: "The IBM z/VM Operating System" ==>06/06/2011 11:40 AM ==>Please respond to ==>"The IBM z/VM Operating System" ==> ==> ==> ==>To ==>IBMVM@LISTSERV.UARK.EDU ==>cc ==> ==>Subject ==>Sending messages to z/OS from z/VM using RSCS ==> ==> ==> ==> ==> ==> ==>I am able to send messages to a z/OS TSO userid using the RSCS command ==>MSG from z/VM. ==> ==>How would the TSO userid send a message to me on the z/VM node? ==> ==>z/VM node is DIS3081. Z/OS node is MVSSYS. ==> ==>Would the z/OS TSO userid be able to issue commands to the z/VM system ==>or would PROP be involved? ==> ==>TIA ==> ==> ==>Jim Hughes ==>Consulting Systems Programmer ==>Mainframe Technical Support Group ==>Department of Information Technology ==>State of New Hampshire ==>27 Hazen Drive ==>Concord, NH 03301 ==>603-271-5586Fax 603.271.1516 ==> ==>Statement of Confidentiality: The contents of this message are ==>confidential. Any unauthorized disclosure, reproduction, use or ==>dissemination (either whole or in part) is prohibited. If you are not ==>the intended recipient of this message, please notify the sender ==>immediately and delete the message from your system. ==> ==> ==> ==> ==> ==> ==>The information contained in this e-mail and any accompanying documents ==>may contain information that is confidential or otherwise protected from ==>disclosure. If you are not the intended recipient of this message, or if ==>this message has been addressed to you in error, please immediately alert ==>the sender by reply e-mail and then delete this message, including any ==>attachments. Any dissemination, distribution or other use of the contents ==>of this message by anyone other than the intended recipient is strictly ==>prohibited. All messages sent to and from this e-mail address may be ==>monitored as permitted by applicable law and regulations to ensure ==>compliance with our internal policies and to protect our business. E- ==>mails are not secure and cannot be guaranteed to be error free as they ==>can be intercepted, amended, lost or destroyed, or contain viruses. You ==>are deemed to have accepted these risks if you communicate with us by e- ==>mail.
Re: Sending messages to z/OS from z/VM using RSCS
Jim, >From TSO you can use: XMIT (or TRANSMIT) node.userid That places you into EDIT on a file permitting multiple lines to be entered, after which you press PF3 to send the file. The message appears as a reader file on the node.userid on the target VM system. See: http://publib.boulder.ibm.com/infocenter/zos/v1r11/index.jsp?topic=/com.ibm.zos.r11.ikjc500/transsyn.htm If there's some other need not met by that link feel free to ask. Mike Walter Aon Corporation The opinions expressed herein are mine alone, not my employer's. "Hughes, Jim" Sent by: "The IBM z/VM Operating System" 06/06/2011 11:40 AM Please respond to "The IBM z/VM Operating System" To IBMVM@LISTSERV.UARK.EDU cc Subject Sending messages to z/OS from z/VM using RSCS I am able to send messages to a z/OS TSO userid using the RSCS command MSG from z/VM. How would the TSO userid send a message to me on the z/VM node? z/VM node is DIS3081. Z/OS node is MVSSYS. Would the z/OS TSO userid be able to issue commands to the z/VM system or would PROP be involved? TIA Jim Hughes Consulting Systems Programmer Mainframe Technical Support Group Department of Information Technology State of New Hampshire 27 Hazen Drive Concord, NH 03301 603-271-5586Fax 603.271.1516 Statement of Confidentiality: The contents of this message are confidential. Any unauthorized disclosure, reproduction, use or dissemination (either whole or in part) is prohibited. If you are not the intended recipient of this message, please notify the sender immediately and delete the message from your system. The information contained in this e-mail and any accompanying documents may contain information that is confidential or otherwise protected from disclosure. If you are not the intended recipient of this message, or if this message has been addressed to you in error, please immediately alert the sender by reply e-mail and then delete this message, including any attachments. Any dissemination, distribution or other use of the contents of this message by anyone other than the intended recipient is strictly prohibited. All messages sent to and from this e-mail address may be monitored as permitted by applicable law and regulations to ensure compliance with our internal policies and to protect our business. E-mails are not secure and cannot be guaranteed to be error free as they can be intercepted, amended, lost or destroyed, or contain viruses. You are deemed to have accepted these risks if you communicate with us by e-mail.
Re: Sending messages to z/OS from z/VM using RSCS
Please use TSO XMIT command - provided RACF doesn't prevent you VMRDR. Regards, Tom From: The IBM z/VM Operating System [mailto:IBMVM@LISTSERV.UARK.EDU] On Behalf Of Michael Harding Sent: Monday, June 06, 2011 1:30 PM To: IBMVM@LISTSERV.UARK.EDU Subject: Re: Sending messages to z/OS from z/VM using RSCS Don't know if it still works or what authorizations might be required, but at one time you could use the operator send command: se 'your message',njenode.userid or something to that effect. -- Mike Harding z/VM System Support mhard...@us.ibm.com mike.b.hard...@kp.org mikehard...@mindless.com (925) 926-3179 (w) (925) 323-2070 (c) IM: VMBearDad (AIM), mbhcpcvt (Y!) The IBM z/VM Operating System wrote on 06/06/2011 09:40:45 AM: > From: "Hughes, Jim" > To: IBMVM@LISTSERV.UARK.EDU > Date: 06/06/2011 09:41 AM > Subject: Sending messages to z/OS from z/VM using RSCS > Sent by: The IBM z/VM Operating System > > I am able to send messages to a z/OS TSO userid using the RSCS command > MSG from z/VM. > > How would the TSO userid send a message to me on the z/VM node? > > z/VM node is DIS3081. Z/OS node is MVSSYS. > > Would the z/OS TSO userid be able to issue commands to the z/VM system > or would PROP be involved? > > TIA > > > Jim Hughes > Consulting Systems Programmer > Mainframe Technical Support Group > Department of Information Technology > State of New Hampshire > 27 Hazen Drive > Concord, NH 03301 > 603-271-5586Fax 603.271.1516 > > Statement of Confidentiality: The contents of this message are > confidential. Any unauthorized disclosure, reproduction, use or > dissemination (either whole or in part) is prohibited. If you are not > the intended recipient of this message, please notify the sender > immediately and delete the message from your system.
Re: Sending messages to z/OS from z/VM using RSCS
Don't know if it still works or what authorizations might be required, but at one time you could use the operator send command: se 'your message',njenode.userid or something to that effect. -- Mike Harding z/VM System Support mhard...@us.ibm.com mike.b.hard...@kp.org mikehard...@mindless.com (925) 926-3179 (w) (925) 323-2070 (c) IM: VMBearDad (AIM), mbhcpcvt (Y!) The IBM z/VM Operating System wrote on 06/06/2011 09:40:45 AM: > From: "Hughes, Jim" > To: IBMVM@LISTSERV.UARK.EDU > Date: 06/06/2011 09:41 AM > Subject: Sending messages to z/OS from z/VM using RSCS > Sent by: The IBM z/VM Operating System > > I am able to send messages to a z/OS TSO userid using the RSCS command > MSG from z/VM. > > How would the TSO userid send a message to me on the z/VM node? > > z/VM node is DIS3081. Z/OS node is MVSSYS. > > Would the z/OS TSO userid be able to issue commands to the z/VM system > or would PROP be involved? > > TIA > > > Jim Hughes > Consulting Systems Programmer > Mainframe Technical Support Group > Department of Information Technology > State of New Hampshire > 27 Hazen Drive > Concord, NH 03301 > 603-271-5586Fax 603.271.1516 > > Statement of Confidentiality: The contents of this message are > confidential. Any unauthorized disclosure, reproduction, use or > dissemination (either whole or in part) is prohibited. If you are not > the intended recipient of this message, please notify the sender > immediately and delete the message from your system.