Re: z/VM 5.4.0 CMS commands are now mixed case
Actually there have been 3277's that displayed mixed case. The test room in IBM BE was equipped with a mixture of both. I always looked for one that was mixed case capable. Even when I had no luck, I tried to work with mixed case but couldn't verify my typings then. 2008/11/18 Scully, William P <[EMAIL PROTECTED]> > > Hmm. OK, how about this. > > - He's on a real 3278 with the blue switch which selects: a,A / A > > - Or perhaps a 3277, where the display is always in upper-case, even > though the keyboard strokes are in mixed case. -- Kris Buelens, IBM Belgium, VM customer support
Re: z/VM 5.4.0 CMS commands are now mixed case
Hmm. OK, how about this. - He's on a real 3278 with the blue switch which selects: a,A / A - Or perhaps a 3277, where the display is always in upper-case, even though the keyboard strokes are in mixed case. - Or, while we're grasping at straws, how about this: Someone removed that APAR from 1980-something which corrected the boo-boo where CP would allow a 3270-data stream to be sent in a MSGNOH that could be used to include like, "Hi Alan!<3270 invisible control char>CP SHUTDOWN Next time Alan presses the ENTER key, KABOOM! OK, I'm really just making stuff up now. (Why am I replying to Alan? For some reason I didn't get the original email. And besides, it's fun to tease the animals in the zoo.) -Original Message- From: The IBM z/VM Operating System [mailto:[EMAIL PROTECTED] On Behalf Of Alan Altmark Sent: Tuesday, November 18, 2008 2:58 PM To: IBMVM@LISTSERV.UARK.EDU Subject: Re: z/VM 5.4.0 CMS commands are now mixed case On Tuesday, 11/18/2008 at 11:30 EST, "Scully, William P" <[EMAIL PROTECTED]> wrote: > Alan, doesn't the setting of CP TERM MODE have an effect on commands? > In TERM MODE CP everything is uppercase. Yes, TERM MODE CP would give the symptoms of upper case input redisplay, but the example showed the "Ready;" message. That means it was TERM MODE VM. Alan Altmark z/VM Development IBM Endicott
Re: z/VM 5.4.0 CMS commands are now mixed case
On Tuesday, 11/18/2008 at 11:30 EST, "Scully, William P" <[EMAIL PROTECTED]> wrote: > Alan, doesn't the setting of CP TERM MODE have an effect on commands? > In TERM MODE CP everything is uppercase. Yes, TERM MODE CP would give the symptoms of upper case input redisplay, but the example showed the "Ready;" message. That means it was TERM MODE VM. Alan Altmark z/VM Development IBM Endicott
Re: z/VM 5.4.0 CMS commands are now mixed case
Rather than posting your ³perceived solution² to your problem, can you tell us what your actual problem is? What are you trying to solve, as opposed to what you think the solution might be? By the way: CMS has been able to accept lower case at the command line for many years. CP tends to convert everything to upper-case, but not CMS. -- Robert P. Nix Mayo Foundation.~. RO-OE-5-55 200 First Street SW/V\ 507-284-0844 Rochester, MN 55905 /( )\ -^^-^^ "In theory, theory and practice are the same, but in practice, theory and practice are different." On 11/18/08 9:07 AM, "Ray Waters" <[EMAIL PROTECTED]> wrote: > With 5.2, CMS (not xedit) anything entered in CMS converted to uppercase when > the enter key was pressed. With 5.4, the characters no longer convert to > uppercase. > Can this be changed via a command to CP or CMS? > > Ray Waters > > > > > > NOTICE: > This e-mail is intended solely for the use of the individual to whom it is > addressed and may contain information that is privileged, confidential or > otherwise exempt from disclosure. If the reader of this e-mail is not the > intended recipient or the employee or agent responsible for delivering the > message to the intended recipient, you are hereby notified that any > dissemination, distribution, or copying of this communication is strictly > prohibited. If you have received this communication in error, please > immediately notify us by replying to the original message at the listed email > address. Thank You. >
Re: z/VM 5.4.0 CMS commands are now mixed case
Here's a straw to grasp at: Local mod that allowed SCREEN INREDISP UPPER ?? Bob Bates Enterprise Hosting Services w. (469)892-6660 c. (214) 907-5071 "This message may contain confidential and/or privileged information. If you are not the addressee or authorized to receive this for the addressee, you must not use, copy, disclose, or take any action based on this message or any information herein. If you have received this message in error, please advise the sender immediately by reply e-mail and delete this message. Thank you for your cooperation." -Original Message- From: The IBM z/VM Operating System [mailto:[EMAIL PROTECTED] On Behalf Of Ray Waters Sent: Tuesday, November 18, 2008 11:22 AM To: IBMVM@LISTSERV.UARK.EDU Subject: Re: z/VM 5.4.0 CMS commands are now mixed case This is not the case. I am in Term Mode VM. Ray -Original Message- From: The IBM z/VM Operating System [mailto:[EMAIL PROTECTED] On Behalf Of Mike Walter Sent: Tuesday, November 18, 2008 10:56 AM To: IBMVM@LISTSERV.UARK.EDU Subject: Re: z/VM 5.4.0 CMS commands are now mixed case My money's on Bill Scully's suggestion, below. Easily overlooked in the stream of replies (and some replies seem to be coming out-of-order today). We all get used to what we've been running for ages. Perhaps Ray is running with a different PROFILE EXEC, or without common change to SYSPROF EXEC that existed before, one that included: CP TERMINAL MODE VM Mike Walter Hewitt Associates Any opinions expressed herein are mine alone and do not necessarily represent the opinions or policies of Hewitt Associates. "Scully, William P" <[EMAIL PROTECTED]> Sent by: "The IBM z/VM Operating System" 11/18/2008 10:16 AM Please respond to "The IBM z/VM Operating System" To IBMVM@LISTSERV.UARK.EDU cc Subject Re: z/VM 5.4.0 CMS commands are now mixed case Alan, doesn't the setting of CP TERM MODE have an effect on commands? In TERM MODE CP everything is uppercase. -Original Message- From: The IBM z/VM Operating System [mailto:[EMAIL PROTECTED] On Behalf Of Alan Altmark Sent: Tuesday, November 18, 2008 10:37 AM To: IBMVM@LISTSERV.UARK.EDU Subject: Re: z/VM 5.4.0 CMS commands are now mixed case On Tuesday, 11/18/2008 at 10:09 EST, Ray Waters <[EMAIL PROTECTED]> wrote: > With 5.2, CMS (not xedit) anything entered in CMS converted to uppercase when > the enter key was pressed. With 5.4, the characters no longer convert to > uppercase. > > Can this be changed via a command to CP or CMS? What command is causing you a problem? Please post a snippet that illustrates your problem. Alan Altmark z/VM Development IBM Endicott The information contained in this e-mail and any accompanying documents may contain information that is confidential or otherwise protected from disclosure. If you are not the intended recipient of this message, or if this message has been addressed to you in error, please immediately alert the sender by reply e-mail and then delete this message, including any attachments. Any dissemination, distribution or other use of the contents of this message by anyone other than the intended recipient is strictly prohibited. All messages sent to and from this e-mail address may be monitored as permitted by applicable law and regulations to ensure compliance with our internal policies and to protect our business. E-mails are not secure and cannot be guaranteed to be error free as they can be intercepted, amended, lost or destroyed, or contain viruses. You are deemed to have accepted these risks if you communicate with us by e-mail. NOTICE: This e-mail is intended solely for the use of the individual to whom it is addressed and may contain information that is privileged, confidential or otherwise exempt from disclosure. If the reader of this e-mail is not the intended recipient or the employee or agent responsible for delivering the message to the intended recipient, you are hereby notified that any dissemination, distribution, or copying of this communication is strictly prohibited. If you have received this communication in error, please immediately notify us by replying to the original message at the listed email address. Thank You.
Re: z/VM 5.4.0 CMS commands are now mixed case
Ray Waters wrote: This is not the case. I am in Term Mode VM. How many lowercase EBCDIC characters can dance on the head of a pin? -- Jack J. Woehr# "Sen. Obama has achieved a great http://www.well.com/~jax # thing for him and for his country." http://www.softwoehr.com # - Sen. John McCain
Re: z/VM 5.4.0 CMS commands are now mixed case
This is not the case. I am in Term Mode VM. Ray -Original Message- From: The IBM z/VM Operating System [mailto:[EMAIL PROTECTED] On Behalf Of Mike Walter Sent: Tuesday, November 18, 2008 10:56 AM To: IBMVM@LISTSERV.UARK.EDU Subject: Re: z/VM 5.4.0 CMS commands are now mixed case My money's on Bill Scully's suggestion, below. Easily overlooked in the stream of replies (and some replies seem to be coming out-of-order today). We all get used to what we've been running for ages. Perhaps Ray is running with a different PROFILE EXEC, or without common change to SYSPROF EXEC that existed before, one that included: CP TERMINAL MODE VM Mike Walter Hewitt Associates Any opinions expressed herein are mine alone and do not necessarily represent the opinions or policies of Hewitt Associates. "Scully, William P" <[EMAIL PROTECTED]> Sent by: "The IBM z/VM Operating System" 11/18/2008 10:16 AM Please respond to "The IBM z/VM Operating System" To IBMVM@LISTSERV.UARK.EDU cc Subject Re: z/VM 5.4.0 CMS commands are now mixed case Alan, doesn't the setting of CP TERM MODE have an effect on commands? In TERM MODE CP everything is uppercase. -Original Message- From: The IBM z/VM Operating System [mailto:[EMAIL PROTECTED] On Behalf Of Alan Altmark Sent: Tuesday, November 18, 2008 10:37 AM To: IBMVM@LISTSERV.UARK.EDU Subject: Re: z/VM 5.4.0 CMS commands are now mixed case On Tuesday, 11/18/2008 at 10:09 EST, Ray Waters <[EMAIL PROTECTED]> wrote: > With 5.2, CMS (not xedit) anything entered in CMS converted to uppercase when > the enter key was pressed. With 5.4, the characters no longer convert to > uppercase. > > Can this be changed via a command to CP or CMS? What command is causing you a problem? Please post a snippet that illustrates your problem. Alan Altmark z/VM Development IBM Endicott The information contained in this e-mail and any accompanying documents may contain information that is confidential or otherwise protected from disclosure. If you are not the intended recipient of this message, or if this message has been addressed to you in error, please immediately alert the sender by reply e-mail and then delete this message, including any attachments. Any dissemination, distribution or other use of the contents of this message by anyone other than the intended recipient is strictly prohibited. All messages sent to and from this e-mail address may be monitored as permitted by applicable law and regulations to ensure compliance with our internal policies and to protect our business. E-mails are not secure and cannot be guaranteed to be error free as they can be intercepted, amended, lost or destroyed, or contain viruses. You are deemed to have accepted these risks if you communicate with us by e-mail. NOTICE: This e-mail is intended solely for the use of the individual to whom it is addressed and may contain information that is privileged, confidential or otherwise exempt from disclosure. If the reader of this e-mail is not the intended recipient or the employee or agent responsible for delivering the message to the intended recipient, you are hereby notified that any dissemination, distribution, or copying of this communication is strictly prohibited. If you have received this communication in error, please immediately notify us by replying to the original message at the listed email address. Thank You.
Re: z/VM 5.4.0 CMS commands are now mixed case
My money's on Bill Scully's suggestion, below. Easily overlooked in the stream of replies (and some replies seem to be coming out-of-order today). We all get used to what we've been running for ages. Perhaps Ray is running with a different PROFILE EXEC, or without common change to SYSPROF EXEC that existed before, one that included: CP TERMINAL MODE VM Mike Walter Hewitt Associates Any opinions expressed herein are mine alone and do not necessarily represent the opinions or policies of Hewitt Associates. "Scully, William P" <[EMAIL PROTECTED]> Sent by: "The IBM z/VM Operating System" 11/18/2008 10:16 AM Please respond to "The IBM z/VM Operating System" To IBMVM@LISTSERV.UARK.EDU cc Subject Re: z/VM 5.4.0 CMS commands are now mixed case Alan, doesn't the setting of CP TERM MODE have an effect on commands? In TERM MODE CP everything is uppercase. -Original Message- From: The IBM z/VM Operating System [mailto:[EMAIL PROTECTED] On Behalf Of Alan Altmark Sent: Tuesday, November 18, 2008 10:37 AM To: IBMVM@LISTSERV.UARK.EDU Subject: Re: z/VM 5.4.0 CMS commands are now mixed case On Tuesday, 11/18/2008 at 10:09 EST, Ray Waters <[EMAIL PROTECTED]> wrote: > With 5.2, CMS (not xedit) anything entered in CMS converted to uppercase when > the enter key was pressed. With 5.4, the characters no longer convert to > uppercase. > > Can this be changed via a command to CP or CMS? What command is causing you a problem? Please post a snippet that illustrates your problem. Alan Altmark z/VM Development IBM Endicott The information contained in this e-mail and any accompanying documents may contain information that is confidential or otherwise protected from disclosure. If you are not the intended recipient of this message, or if this message has been addressed to you in error, please immediately alert the sender by reply e-mail and then delete this message, including any attachments. Any dissemination, distribution or other use of the contents of this message by anyone other than the intended recipient is strictly prohibited. All messages sent to and from this e-mail address may be monitored as permitted by applicable law and regulations to ensure compliance with our internal policies and to protect our business. E-mails are not secure and cannot be guaranteed to be error free as they can be intercepted, amended, lost or destroyed, or contain viruses. You are deemed to have accepted these risks if you communicate with us by e-mail.
Re: z/VM 5.4.0 CMS commands are now mixed case
What a mess! Very confusing. For clarification, Ray is asking (and please confirm, Ray) about the ECHOING of certain commands. UCENG (or other SET LANG) would apply to RESPONSES from commands. Vewy diffewent. In my experience, commands echoed by CMS are echoed as entered and have been for a very long time. (VM/SP R1? certainly R5) But commands echoed by CP are echoed in upper case to this day (5.4). Anyway ... we're talking about command redisplay, not input case sensitivity nor command output (SET LANG). Just trying to get everyone on the same scree... er, uh, the same page. Are we? -- Rick; <>< On Tue, Nov 18, 2008 at 10:07 AM, Ray Waters <[EMAIL PROTECTED]> wrote: > With 5.2, CMS (not xedit) anything entered in CMS converted to uppercase > when the enter key was pressed. With 5.4, the characters no longer convert > to uppercase. > > Can this be changed via a command to CP or CMS? > > > > Ray Waters > > > > > > > > > NOTICE: > This e-mail is intended solely for the use of the individual to whom it is > addressed and may contain information that is privileged, confidential or > otherwise exempt from disclosure. If the reader of this e-mail is not the > intended recipient or the employee or agent responsible for delivering the > message to the intended recipient, you are hereby notified that any > dissemination, distribution, or copying of this communication is strictly > prohibited. If you have received this communication in error, please > immediately notify us by replying to the original message at the listed > email address. Thank You. >
Re: z/VM 5.4.0 CMS commands are now mixed case
The LANG does not make a difference: q lang AMENG Ready; T=0.01/0.01 11:29:05 ind AVGPROC-050% 03 XSTORE-00/SEC MIGRATE-/SEC MDC READS-001384/SEC WRITES-74/SEC HIT RATIO-096% PAGING-3/SEC STEAL-000% Q0-4(0) DORMANT-00025 Q1-8(0) E1-0(0) Q2-4(0) EXPAN-002 E2-0(0) Q3-00024(0) EXPAN-002 E3-0(0) PROC -050% CP PROC 0001-050% CP PROC 0002-050% CP LIMITED-0 Ready; T=0.01/0.01 11:29:08 set lang uceng READY; T=0.01/0.01 11:29:21 q lang UCENG READY; T=0.01/0.01 11:29:24 ind AVGPROC-050% 03 XSTORE-00/SEC MIGRATE-/SEC MDC READS-001321/SEC WRITES-72/SEC HIT RATIO-095% PAGING-4/SEC STEAL-000% Q0-4(0) DORMANT-00026 Q1-8(0) E1-0(0) Q2-4(0) EXPAN-002 E2-0(0) Q3-00024(0) EXPAN-002 E3-0(0) PROC -051% CP PROC 0001-050% CP PROC 0002-050% CP LIMITED-0 READY; T=0.01/0.01 11:29:31 Ray From: The IBM z/VM Operating System [mailto:[EMAIL PROTECTED] On Behalf Of Mike Walter Sent: Tuesday, November 18, 2008 10:21 AM To: IBMVM@LISTSERV.UARK.EDU Subject: Re: z/VM 5.4.0 CMS commands are now mixed case As someone suggested earlier, perhaps on 5.2 you were running with 'CP SET LANGuage UCENG'? That's UpperCase English. Perhaps when you upgraded to z/VM 5.4 you chose AMENG (American English) instead? It's an easy thing to change at install time, and an easy one to test (if you installed the NSSes) by entering: SET LANG UCENG Mike Walter Hewitt Associates Any opinions expressed herein are mine alone and do not necessarily represent the opinions or policies of Hewitt Associates. "Ray Waters" <[EMAIL PROTECTED]> Sent by: "The IBM z/VM Operating System" 11/18/2008 10:09 AM Please respond to "The IBM z/VM Operating System" To IBMVM@LISTSERV.UARK.EDU cc Subject Re: z/VM 5.4.0 CMS commands are now mixed case There is NO problem. Every thing works as before. I just noticed a difference between our prior VM systems and 5.4. Our prior systems would convert anything typed in CMS to upper case once the enter key was pressed. Now with 5.4 the translation does not occur. With 5.4: q alloc = q alloc q t = q t ind = ind With 5.2: q alloc = Q ALLOC q t = Q T ind = IND Not sure what changed. Maybe during the install I answered something different with 5.4 compared to prior installs. Is there a SET command to change this? Ray -Original Message- From: The IBM z/VM Operating System [mailto:[EMAIL PROTECTED] On Behalf Of Alan Altmark Sent: Tuesday, November 18, 2008 9:37 AM To: IBMVM@LISTSERV.UARK.EDU Subject: Re: z/VM 5.4.0 CMS commands are now mixed case On Tuesday, 11/18/2008 at 10:09 EST, Ray Waters <[EMAIL PROTECTED]> wrote: > With 5.2, CMS (not xedit) anything entered in CMS converted to uppercase when > the enter key was pressed. With 5.4, the characters no longer convert to > uppercase. > > Can this be changed via a command to CP or CMS? What command is causing you a problem? Please post a snippet that illustrates your problem. Alan Altmark z/VM Development IBM Endicott NOTICE: This e-mail is intended solely for the use of the individual to whom it is addressed and may contain information that is privileged, confidential or otherwise exempt from disclosure. If the reader of this e-mail is not the intended recipient or the employee or agent responsible for delivering the message to the intended recipient, you are hereby notified that any dissemination, distribution, or copying of this communication is strictly prohibited. If you have received this communication in error, please immediately notify us by replying to the original message at the listed email address. Thank You. The information contained in this e-mail and any accompanying documents may contain information that is confidential or otherwise protected from disclosure. If you are not the intended recipient of this message, or if this message has been addressed to you in error, please immediately alert the sender by reply e-mail and then delete this message, including any attachments. Any dissemination, distribution or other use of the contents of this message by anyone other than the intended recipient is strictly prohibited. All messages sent to and from this e-mail address may be monitored as permitted by applicable law and regulations to ensure compliance with our internal policies and to protect our business. E-mails are not secure and cannot be guaranteed to be error free as they can be intercepted, amended, lost or destroyed, or contain viruses. You are deemed to have accepted these risks if you communicate with us by e-mail. NOTICE: This e-mail is intended solely for the use of the individual to whom it
Re: z/VM 5.4.0 CMS commands are now mixed case
As someone suggested earlier, perhaps on 5.2 you were running with 'CP SET LANGuage UCENG'? That's UpperCase English. Perhaps when you upgraded to z/VM 5.4 you chose AMENG (American English) instead? It's an easy thing to change at install time, and an easy one to test (if you installed the NSSes) by entering: SET LANG UCENG Mike Walter Hewitt Associates Any opinions expressed herein are mine alone and do not necessarily represent the opinions or policies of Hewitt Associates. "Ray Waters" <[EMAIL PROTECTED]> Sent by: "The IBM z/VM Operating System" 11/18/2008 10:09 AM Please respond to "The IBM z/VM Operating System" To IBMVM@LISTSERV.UARK.EDU cc Subject Re: z/VM 5.4.0 CMS commands are now mixed case There is NO problem. Every thing works as before. I just noticed a difference between our prior VM systems and 5.4. Our prior systems would convert anything typed in CMS to upper case once the enter key was pressed. Now with 5.4 the translation does not occur. With 5.4: q alloc = q alloc q t = q t ind = ind With 5.2: q alloc = Q ALLOC q t = Q T ind = IND Not sure what changed. Maybe during the install I answered something different with 5.4 compared to prior installs. Is there a SET command to change this? Ray -Original Message- From: The IBM z/VM Operating System [mailto:[EMAIL PROTECTED] On Behalf Of Alan Altmark Sent: Tuesday, November 18, 2008 9:37 AM To: IBMVM@LISTSERV.UARK.EDU Subject: Re: z/VM 5.4.0 CMS commands are now mixed case On Tuesday, 11/18/2008 at 10:09 EST, Ray Waters <[EMAIL PROTECTED]> wrote: > With 5.2, CMS (not xedit) anything entered in CMS converted to uppercase when > the enter key was pressed. With 5.4, the characters no longer convert to > uppercase. > > Can this be changed via a command to CP or CMS? What command is causing you a problem? Please post a snippet that illustrates your problem. Alan Altmark z/VM Development IBM Endicott NOTICE: This e-mail is intended solely for the use of the individual to whom it is addressed and may contain information that is privileged, confidential or otherwise exempt from disclosure. If the reader of this e-mail is not the intended recipient or the employee or agent responsible for delivering the message to the intended recipient, you are hereby notified that any dissemination, distribution, or copying of this communication is strictly prohibited. If you have received this communication in error, please immediately notify us by replying to the original message at the listed email address. Thank You. The information contained in this e-mail and any accompanying documents may contain information that is confidential or otherwise protected from disclosure. If you are not the intended recipient of this message, or if this message has been addressed to you in error, please immediately alert the sender by reply e-mail and then delete this message, including any attachments. Any dissemination, distribution or other use of the contents of this message by anyone other than the intended recipient is strictly prohibited. All messages sent to and from this e-mail address may be monitored as permitted by applicable law and regulations to ensure compliance with our internal policies and to protect our business. E-mails are not secure and cannot be guaranteed to be error free as they can be intercepted, amended, lost or destroyed, or contain viruses. You are deemed to have accepted these risks if you communicate with us by e-mail.
Re: z/VM 5.4.0 CMS commands are now mixed case
Alan, doesn't the setting of CP TERM MODE have an effect on commands? In TERM MODE CP everything is uppercase. -Original Message- From: The IBM z/VM Operating System [mailto:[EMAIL PROTECTED] On Behalf Of Alan Altmark Sent: Tuesday, November 18, 2008 10:37 AM To: IBMVM@LISTSERV.UARK.EDU Subject: Re: z/VM 5.4.0 CMS commands are now mixed case On Tuesday, 11/18/2008 at 10:09 EST, Ray Waters <[EMAIL PROTECTED]> wrote: > With 5.2, CMS (not xedit) anything entered in CMS converted to uppercase when > the enter key was pressed. With 5.4, the characters no longer convert to > uppercase. > > Can this be changed via a command to CP or CMS? What command is causing you a problem? Please post a snippet that illustrates your problem. Alan Altmark z/VM Development IBM Endicott
Re: z/VM 5.4.0 CMS commands are now mixed case
Was your default language set to UCENG before? (Q LANG) Marcy "This message may contain confidential and/or privileged information. If you are not the addressee or authorized to receive this for the addressee, you must not use, copy, disclose, or take any action based on this message or any information herein. If you have received this message in error, please advise the sender immediately by reply e-mail and delete this message. Thank you for your cooperation." -Original Message- From: The IBM z/VM Operating System [mailto:[EMAIL PROTECTED] On Behalf Of Ray Waters Sent: Tuesday, November 18, 2008 8:09 AM To: IBMVM@LISTSERV.UARK.EDU Subject: Re: [IBMVM] z/VM 5.4.0 CMS commands are now mixed case There is NO problem. Every thing works as before. I just noticed a difference between our prior VM systems and 5.4. Our prior systems would convert anything typed in CMS to upper case once the enter key was pressed. Now with 5.4 the translation does not occur. With 5.4: q alloc = q alloc q t = q t ind = ind With 5.2: q alloc = Q ALLOC q t = Q T ind = IND Not sure what changed. Maybe during the install I answered something different with 5.4 compared to prior installs. Is there a SET command to change this? Ray -Original Message- From: The IBM z/VM Operating System [mailto:[EMAIL PROTECTED] On Behalf Of Alan Altmark Sent: Tuesday, November 18, 2008 9:37 AM To: IBMVM@LISTSERV.UARK.EDU Subject: Re: z/VM 5.4.0 CMS commands are now mixed case On Tuesday, 11/18/2008 at 10:09 EST, Ray Waters <[EMAIL PROTECTED]> wrote: > With 5.2, CMS (not xedit) anything entered in CMS converted to > uppercase when > the enter key was pressed. With 5.4, the characters no longer convert > to > uppercase. > > Can this be changed via a command to CP or CMS? What command is causing you a problem? Please post a snippet that illustrates your problem. Alan Altmark z/VM Development IBM Endicott NOTICE: This e-mail is intended solely for the use of the individual to whom it is addressed and may contain information that is privileged, confidential or otherwise exempt from disclosure. If the reader of this e-mail is not the intended recipient or the employee or agent responsible for delivering the message to the intended recipient, you are hereby notified that any dissemination, distribution, or copying of this communication is strictly prohibited. If you have received this communication in error, please immediately notify us by replying to the original message at the listed email address. Thank You.
Re: z/VM 5.4.0 CMS commands are now mixed case
There is NO problem. Every thing works as before. I just noticed a difference between our prior VM systems and 5.4. Our prior systems would convert anything typed in CMS to upper case once the enter key was pressed. Now with 5.4 the translation does not occur. With 5.4: q alloc = q alloc q t = q t ind = ind With 5.2: q alloc = Q ALLOC q t = Q T ind = IND Not sure what changed. Maybe during the install I answered something different with 5.4 compared to prior installs. Is there a SET command to change this? Ray -Original Message- From: The IBM z/VM Operating System [mailto:[EMAIL PROTECTED] On Behalf Of Alan Altmark Sent: Tuesday, November 18, 2008 9:37 AM To: IBMVM@LISTSERV.UARK.EDU Subject: Re: z/VM 5.4.0 CMS commands are now mixed case On Tuesday, 11/18/2008 at 10:09 EST, Ray Waters <[EMAIL PROTECTED]> wrote: > With 5.2, CMS (not xedit) anything entered in CMS converted to uppercase when > the enter key was pressed. With 5.4, the characters no longer convert to > uppercase. > > Can this be changed via a command to CP or CMS? What command is causing you a problem? Please post a snippet that illustrates your problem. Alan Altmark z/VM Development IBM Endicott NOTICE: This e-mail is intended solely for the use of the individual to whom it is addressed and may contain information that is privileged, confidential or otherwise exempt from disclosure. If the reader of this e-mail is not the intended recipient or the employee or agent responsible for delivering the message to the intended recipient, you are hereby notified that any dissemination, distribution, or copying of this communication is strictly prohibited. If you have received this communication in error, please immediately notify us by replying to the original message at the listed email address. Thank You.
Re: z/VM 5.4.0 CMS commands are now mixed case
Isn't it to do with the SET LANG option? One of the options is UCAMENG or something like that? This one is upper case only.
Re: z/VM 5.4.0 CMS commands are now mixed case
On Tuesday, 11/18/2008 at 10:46 EST, Rob van der Heij <[EMAIL PROTECTED]> wrote: > On Tue, Nov 18, 2008 at 4:36 PM, Alan Altmark <[EMAIL PROTECTED]> wrote: > > > What command is causing you a problem? Please post a snippet that > > illustrates your problem. > > I did notice that the logon command is echoed in mixed case by CP on > z/VM 5.3. It seems to have changed between z/VM 3.1 and z/VM 5.3 (not > tried to narrow it down further). That's the result of the support for password phrases. They are mixed case with blanks and special characters allowed. Alan Altmark z/VM Development IBM Endicott
Re: z/VM 5.4.0 CMS commands are now mixed case
I run into the exact opposite problem.. ie when entering a pipe on the terminal nothing gets translated to upper case, so one must remember that a 'FIND' or 'LOCATE' must be typed in upper case (assuming upper is what one is looking for). -Original Message- From: The IBM z/VM Operating System [mailto:[EMAIL PROTECTED] Behalf Of Ray Waters Sent: Tuesday, November 18, 2008 9:32 AM To: IBMVM@LISTSERV.UARK.EDU Subject: Re: z/VM 5.4.0 CMS commands are now mixed case Mike, I no longer have my 5.2 system up. Our 5.4 after pressing enter: q t TIME IS 10:29:07 EST TUESDAY 11/18/08 CONNECT= 00:04:20 VIRTCPU= 000:00.01 TOTCPU= 000:00.02 Ready; T=0.01/0.01 10:29:07 In 5.2 it would be: Q T TIME IS 10:29:07 EST TUESDAY 11/18/08 CONNECT= 00:04:20 VIRTCPU= 000:00.01 TOTCPU= 000:00.02 Ready; T=0.01/0.01 10:29:07 Ray _ From: The IBM z/VM Operating System [mailto:[EMAIL PROTECTED] On Behalf Of Michael Donovan Sent: Tuesday, November 18, 2008 9:25 AM To: IBMVM@LISTSERV.UARK.EDU Subject: Re: z/VM 5.4.0 CMS commands are now mixed case Ray, I'm confused. To my knowledge, nothing changed between 5.2 and 5.4 with the way CMS commands are handled. Do you have an example? Thanks! Mike Donovan Inactive hide details for Ray Waters " src="cid:1__=0ABBFF96DFC70CAC8f9e8a93df938@us.ibm.com" width=16 height=16>Ray Waters <[EMAIL PROTECTED]> Ray Waters <[EMAIL PROTECTED]> Sent by: The IBM z/VM Operating System 11/18/2008 10:07 AM Please respond to The IBM z/VM Operating System To IBMVM@LISTSERV.UARK.EDU cc Subject z/VM 5.4.0 CMS commands are now mixed case With 5.2, CMS (not xedit) anything entered in CMS converted to uppercase when the enter key was pressed. With 5.4, the characters no longer convert to uppercase. Can this be changed via a command to CP or CMS? Ray Waters _ NOTICE: This e-mail is intended solely for the use of the individual to whom it is addressed and may contain information that is privileged, confidential or otherwise exempt from disclosure. If the reader of this e-mail is not the intended recipient or the employee or agent responsible for delivering the message to the intended recipient, you are hereby notified that any dissemination, distribution, or copying of this communication is strictly prohibited. If you have received this communication in error, please immediately notify us by replying to the original message at the listed email address. Thank You. _ NOTICE: This e-mail is intended solely for the use of the individual to whom it is addressed and may contain information that is privileged, confidential or otherwise exempt from disclosure. If the reader of this e-mail is not the intended recipient or the employee or agent responsible for delivering the message to the intended recipient, you are hereby notified that any dissemination, distribution, or copying of this communication is strictly prohibited. If you have received this communication in error, please immediately notify us by replying to the original message at the listed email address. Thank You.
Re: z/VM 5.4.0 CMS commands are now mixed case
I don't yet have a 5.4 system, but here is a sample from a 2.3, 3.1, 4.4, 5.2, and 5.3 system. q cplevel VM/ESA Version 2 Release 3.0, service level 0101 Generated at 03/11/02 16:44:14 EST IPL at 08/17/03 03:40:50 EST Ready; T=0.01/0.01 10:50:06 q t TIME IS 10:50:07 EST TUESDAY 11/18/08 CONNECT= 00:00:10 VIRTCPU= 000:00.03 TOTCPU= 000:00.06 Ready; T=0.01/0.01 10:50:07 q cplevel z/VM Version 3 Release 1.0, service level 0401 (32-bit) Generated at 01/15/04 18:31:55 EST IPL at 09/27/06 13:16:57 EST Ready; T=0.01/0.01 10:47:26 q t TIME IS 10:47:27 EST TUESDAY 11/18/08 CONNECT= 00:00:07 VIRTCPU= 000:00.03 TOTCPU= 000:00.05 Ready; T=0.01/0.01 10:47:27 q cplevel z/VM Version 4 Release 4.0, service level 0501 (64-bit) Generated at 03/31/06 16:54:42 EST IPL at 01/06/08 03:22:00 EST Ready; T=0.01/0.01 10:52:37 q t TIME IS 10:52:38 EST TUESDAY 11/18/08 CONNECT= 00:00:09 VIRTCPU= 000:00.02 TOTCPU= 000:00.06 Ready; T=0.01/0.01 10:52:38 q cplevel z/VM Version 5 Release 2.0, service level 0602 (64-bit) Generated at 07/17/08 09:30:41 CST IPL at 08/24/08 13:53:31 CST Ready; T=0.01/0.01 09:53:06 q t TIME IS 09:53:07 CST TUESDAY 11/18/08 CONNECT= 00:00:08 VIRTCPU= 000:00.04 TOTCPU= 000:00.12 Ready; T=0.01/0.01 09:53:07 q cplevel z/VM Version 5 Release 3.0, service level 0701 (64-bit) Generated at 05/29/2007 22:21:12 EST IPL at 09/20/2008 23:51:56 EST Ready; T=0.01/0.01 10:47:55 q t TIME IS 10:47:59 EST TUESDAY 11/18/2008 CONNECT= 00:44:29 VIRTCPU= 000:00.08 TOTCPU= 000:00.15 Ready; T=0.01/0.01 10:47:59 Scott R Wandschneider Senior Systems Programmer|| Infocrossing, a Wipro Company || 11707 Miracle Hills Drive, Omaha, NE, 68154-4457|| ': 402.963.8905 || Ë:847.849.7223 || :: [EMAIL PROTECTED] **Think Green - Please print responsibly** -Original Message- From: The IBM z/VM Operating System [mailto:[EMAIL PROTECTED] On Behalf Of Mike Walter Sent: Tuesday, November 18, 2008 9:51 AM To: IBMVM@LISTSERV.UARK.EDU Subject: Re: z/VM 5.4.0 CMS commands are now mixed case Nor on our z/VM 5.1 and z/VM 5.4 systems (note the lower-case cp q cplevel): - q cplevel z/VM Version 5 Release 1.0, service level 0501 (64-bit) Generated at 09/04/08 16:26:13 CST IPL at 11/16/08 20:54:17 CST cp q cplevel z/VM Version 5 Release 4.0, service level 0801 (64-bit) Generated at 08/04/08 16:27:40 CST IPL at 11/02/08 07:23:23 CST -- Even if you had a "Q EXEC", the input redisplay would not be uppercased. Are you running some shell exec that accepts commands, redisplays them (uppercased) and then executes them? Mike Walter Hewitt Associates Any opinions expressed herein are mine alone and do not necessarily represent the opinions or policies of Hewitt Associates. "Rich Smrcina" <[EMAIL PROTECTED]> Sent by: "The IBM z/VM Operating System" 11/18/2008 09:38 AM Please respond to "The IBM z/VM Operating System" To IBMVM@LISTSERV.UARK.EDU cc Subject Re: z/VM 5.4.0 CMS commands are now mixed case I don't see this effect on 5.2. LOGON AT 10:37:23 CDT TUESDAY 11/18/08 z/VM V5.2.02008-08-20 15:41 Ready; T=0.12/0.18 10:37:23 q t TIME IS 10:37:26 CDT TUESDAY 11/18/08 CONNECT= 00:00:03 VIRTCPU= 000:00.26 TOTCPU= 000:00.60 Ready; T=0.01/0.01 10:37:26 Ray Waters wrote: > Mike, > > > > I no longer have my 5.2 system up. > > > > Our 5.4 after pressing enter: > > q t > > TIME IS 10:29:07 EST TUESDAY 11/18/08 > > CONNECT= 00:04:20 VIRTCPU= 000:00.01 TOTCPU= 000:00.02 > > Ready; T=0.01/0.01 10:29:07 > > > > In 5.2 it would be: > > Q T > > TIME IS 10:29:07 EST TUESDAY 11/18/08 > > CONNECT= 00:04:20 VIRTCPU= 000:00.01 TOTCPU= 000:00.02 > > Ready; T=0.01/0.01 10:29:07 > > > > Ray -- Rich Smrcina VM Assist, Inc. Phone: 414-491-6001 Ans Ser
Re: z/VM 5.4.0 CMS commands are now mixed case
Nor on our z/VM 5.1 and z/VM 5.4 systems (note the lower-case cp q cplevel): - q cplevel z/VM Version 5 Release 1.0, service level 0501 (64-bit) Generated at 09/04/08 16:26:13 CST IPL at 11/16/08 20:54:17 CST cp q cplevel z/VM Version 5 Release 4.0, service level 0801 (64-bit) Generated at 08/04/08 16:27:40 CST IPL at 11/02/08 07:23:23 CST -- Even if you had a "Q EXEC", the input redisplay would not be uppercased. Are you running some shell exec that accepts commands, redisplays them (uppercased) and then executes them? Mike Walter Hewitt Associates Any opinions expressed herein are mine alone and do not necessarily represent the opinions or policies of Hewitt Associates. "Rich Smrcina" <[EMAIL PROTECTED]> Sent by: "The IBM z/VM Operating System" 11/18/2008 09:38 AM Please respond to "The IBM z/VM Operating System" To IBMVM@LISTSERV.UARK.EDU cc Subject Re: z/VM 5.4.0 CMS commands are now mixed case I don't see this effect on 5.2. LOGON AT 10:37:23 CDT TUESDAY 11/18/08 z/VM V5.2.02008-08-20 15:41 Ready; T=0.12/0.18 10:37:23 q t TIME IS 10:37:26 CDT TUESDAY 11/18/08 CONNECT= 00:00:03 VIRTCPU= 000:00.26 TOTCPU= 000:00.60 Ready; T=0.01/0.01 10:37:26 Ray Waters wrote: > Mike, > > > > I no longer have my 5.2 system up. > > > > Our 5.4 after pressing enter: > > q t > > TIME IS 10:29:07 EST TUESDAY 11/18/08 > > CONNECT= 00:04:20 VIRTCPU= 000:00.01 TOTCPU= 000:00.02 > > Ready; T=0.01/0.01 10:29:07 > > > > In 5.2 it would be: > > Q T > > TIME IS 10:29:07 EST TUESDAY 11/18/08 > > CONNECT= 00:04:20 VIRTCPU= 000:00.01 TOTCPU= 000:00.02 > > Ready; T=0.01/0.01 10:29:07 > > > > Ray -- Rich Smrcina VM Assist, Inc. Phone: 414-491-6001 Ans Service: 360-715-2467 http://www.linkedin.com/in/richsmrcina Catch the WAVV! http://www.wavv.org WAVV 2009 - Orlando, FL - May 15-19, 2009 The information contained in this e-mail and any accompanying documents may contain information that is confidential or otherwise protected from disclosure. If you are not the intended recipient of this message, or if this message has been addressed to you in error, please immediately alert the sender by reply e-mail and then delete this message, including any attachments. Any dissemination, distribution or other use of the contents of this message by anyone other than the intended recipient is strictly prohibited. All messages sent to and from this e-mail address may be monitored as permitted by applicable law and regulations to ensure compliance with our internal policies and to protect our business. E-mails are not secure and cannot be guaranteed to be error free as they can be intercepted, amended, lost or destroyed, or contain viruses. You are deemed to have accepted these risks if you communicate with us by e-mail.
Re: z/VM 5.4.0 CMS commands are now mixed case
This from 5.2 q t TIME IS 11:46:12 EDT TUESDAY 11/18/08 CONNECT= 00:11:47 VIRTCPU= 000:00.03 TOTCPU= 000:00.05 Ready; T=0.01/0.01 11:46:12 q cplevel z/VM Version 5 Release 2.0, service level 0601 (64-bit) Generated at 08/02/06 11:10:50 EDT IPL at 09/15/08 08:34:34 EDT Ready; T=0.01/0.01 11:46:20 On Tue, Nov 18, 2008 at 10:39 AM, Rob van der Heij <[EMAIL PROTECTED]>wrote: > On Tue, Nov 18, 2008 at 4:36 PM, Alan Altmark <[EMAIL PROTECTED]> > wrote: > > > What command is causing you a problem? Please post a snippet that > > illustrates your problem. > > I did notice that the logon command is echoed in mixed case by CP on > z/VM 5.3. It seems to have changed between z/VM 3.1 and z/VM 5.3 (not > tried to narrow it down further). > > Rob > -- Mark Pace Mainline Information Systems 1700 Summit Lake Drive Tallahassee, FL. 32317
Re: z/VM 5.4.0 CMS commands are now mixed case
FYI - My 5.2 and 5.4 2nd level are the same. The q t is NOT converted to upper case. Nor are other commands like q alloc page or q xst. At 10:31 AM 11/18/2008, Ray Waters wrote: Mike, I no longer have my 5.2 system up. Our 5.4 after pressing enter: q t TIME IS 10:29:07 EST TUESDAY 11/18/08 CONNECT= 00:04:20 VIRTCPU= 000:00.01 TOTCPU= 000:00.02 Ready; T=0.01/0.01 10:29:07 In 5.2 it would be: Q T TIME IS 10:29:07 EST TUESDAY 11/18/08 CONNECT= 00:04:20 VIRTCPU= 000:00.01 TOTCPU= 000:00.02 Ready; T=0.01/0.01 10:29:07 Ray -- From: The IBM z/VM Operating System [mailto:[EMAIL PROTECTED] On Behalf Of Michael Donovan Sent: Tuesday, November 18, 2008 9:25 AM To: IBMVM@LISTSERV.UARK.EDU Subject: Re: z/VM 5.4.0 CMS commands are now mixed case Ray, I'm confused. To my knowledge, nothing changed between 5.2 and 5.4 with the way CMS commands are handled. Do you have an example? Thanks! Mike Donovan Inactive hide details for Ray Waters <[EMAIL PROTECTED] Ray Waters <[EMAIL PROTECTED]> Ray Waters <[EMAIL PROTECTED]> Sent by: The IBM z/VM Operating System 11/18/2008 10:07 AM Please respond to The IBM z/VM Operating System [] To IBMVM@LISTSERV.UARK.EDU [] cc [] Subject z/VM 5.4.0 CMS commands are now mixed case With 5.2, CMS (not xedit) anything entered in CMS converted to uppercase when the enter key was pressed. With 5.4, the characters no longer convert to uppercase. Can this be changed via a command to CP or CMS? Ray Waters -- NOTICE: This e-mail is intended solely for the use of the individual to whom it is addressed and may contain information that is privileged, confidential or otherwise exempt from disclosure. If the reader of this e-mail is not the intended recipient or the employee or agent responsible for delivering the message to the intended recipient, you are hereby notified that any dissemination, distribution, or copying of this communication is strictly prohibited. If you have received this communication in error, please immediately notify us by replying to the original message at the listed email address. Thank You. -- NOTICE: This e-mail is intended solely for the use of the individual to whom it is addressed and may contain information that is privileged, confidential or otherwise exempt from disclosure. If the reader of this e-mail is not the intended recipient or the employee or agent responsible for delivering the message to the intended recipient, you are hereby notified that any dissemination, distribution, or copying of this communication is strictly prohibited. If you have received this communication in error, please immediately notify us by replying to the original message at the listed email address. Thank You. Brian W. France Systems Administrator (Mainframe) Pennsylvania State University Administrative Information Services - Infrastructure/SYSARC Rm 25 Shields Bldg., University Park, Pa. 16802 814-863-4739 [EMAIL PROTECTED] "To make an apple pie from scratch, you must first invent the universe." Carl Sagan
Re: z/VM 5.4.0 CMS commands are now mixed case
On Tue, Nov 18, 2008 at 4:36 PM, Alan Altmark <[EMAIL PROTECTED]> wrote: > What command is causing you a problem? Please post a snippet that > illustrates your problem. I did notice that the logon command is echoed in mixed case by CP on z/VM 5.3. It seems to have changed between z/VM 3.1 and z/VM 5.3 (not tried to narrow it down further). Rob
Re: z/VM 5.4.0 CMS commands are now mixed case
I don't see this effect on 5.2. LOGON AT 10:37:23 CDT TUESDAY 11/18/08 z/VM V5.2.02008-08-20 15:41 Ready; T=0.12/0.18 10:37:23 q t TIME IS 10:37:26 CDT TUESDAY 11/18/08 CONNECT= 00:00:03 VIRTCPU= 000:00.26 TOTCPU= 000:00.60 Ready; T=0.01/0.01 10:37:26 Ray Waters wrote: Mike, I no longer have my 5.2 system up. Our 5.4 after pressing enter: q t TIME IS 10:29:07 EST TUESDAY 11/18/08 CONNECT= 00:04:20 VIRTCPU= 000:00.01 TOTCPU= 000:00.02 Ready; T=0.01/0.01 10:29:07 In 5.2 it would be: Q T TIME IS 10:29:07 EST TUESDAY 11/18/08 CONNECT= 00:04:20 VIRTCPU= 000:00.01 TOTCPU= 000:00.02 Ready; T=0.01/0.01 10:29:07 Ray -- Rich Smrcina VM Assist, Inc. Phone: 414-491-6001 Ans Service: 360-715-2467 http://www.linkedin.com/in/richsmrcina Catch the WAVV! http://www.wavv.org WAVV 2009 - Orlando, FL - May 15-19, 2009
Re: z/VM 5.4.0 CMS commands are now mixed case
On Tuesday, 11/18/2008 at 10:09 EST, Ray Waters <[EMAIL PROTECTED]> wrote: > With 5.2, CMS (not xedit) anything entered in CMS converted to uppercase when > the enter key was pressed. With 5.4, the characters no longer convert to > uppercase. > > Can this be changed via a command to CP or CMS? What command is causing you a problem? Please post a snippet that illustrates your problem. Alan Altmark z/VM Development IBM Endicott
Re: z/VM 5.4.0 CMS commands are now mixed case
Mike, I no longer have my 5.2 system up. Our 5.4 after pressing enter: q t TIME IS 10:29:07 EST TUESDAY 11/18/08 CONNECT= 00:04:20 VIRTCPU= 000:00.01 TOTCPU= 000:00.02 Ready; T=0.01/0.01 10:29:07 In 5.2 it would be: Q T TIME IS 10:29:07 EST TUESDAY 11/18/08 CONNECT= 00:04:20 VIRTCPU= 000:00.01 TOTCPU= 000:00.02 Ready; T=0.01/0.01 10:29:07 Ray From: The IBM z/VM Operating System [mailto:[EMAIL PROTECTED] On Behalf Of Michael Donovan Sent: Tuesday, November 18, 2008 9:25 AM To: IBMVM@LISTSERV.UARK.EDU Subject: Re: z/VM 5.4.0 CMS commands are now mixed case Ray, I'm confused. To my knowledge, nothing changed between 5.2 and 5.4 with the way CMS commands are handled. Do you have an example? Thanks! Mike Donovan [cid:1__=0ABBFF96DFC70CAC8f9e8a93df938@us.ibm.com]Ray Waters <[EMAIL PROTECTED]> Ray Waters <[EMAIL PROTECTED]> Sent by: The IBM z/VM Operating System 11/18/2008 10:07 AM Please respond to The IBM z/VM Operating System To IBMVM@LISTSERV.UARK.EDU cc Subject z/VM 5.4.0 CMS commands are now mixed case With 5.2, CMS (not xedit) anything entered in CMS converted to uppercase when the enter key was pressed. With 5.4, the characters no longer convert to uppercase. Can this be changed via a command to CP or CMS? Ray Waters NOTICE: This e-mail is intended solely for the use of the individual to whom it is addressed and may contain information that is privileged, confidential or otherwise exempt from disclosure. If the reader of this e-mail is not the intended recipient or the employee or agent responsible for delivering the message to the intended recipient, you are hereby notified that any dissemination, distribution, or copying of this communication is strictly prohibited. If you have received this communication in error, please immediately notify us by replying to the original message at the listed email address. Thank You. NOTICE: This e-mail is intended solely for the use of the individual to whom it is addressed and may contain information that is privileged, confidential or otherwise exempt from disclosure. If the reader of this e-mail is not the intended recipient or the employee or agent responsible for delivering the message to the intended recipient, you are hereby notified that any dissemination, distribution, or copying of this communication is strictly prohibited. If you have received this communication in error, please immediately notify us by replying to the original message at the listed email address. Thank You.
Re: z/VM 5.4.0 CMS commands are now mixed case
Ray, I'm confused. To my knowledge, nothing changed between 5.2 and 5.4 with the way CMS commands are handled. Do you have an example? Thanks! Mike Donovan Ray Waters <[EMAIL PROTECTED] olutions.com> To Sent by: The IBM IBMVM@LISTSERV.UARK.EDU z/VM Operating cc System <[EMAIL PROTECTED] Subject ARK.EDU> z/VM 5.4.0 CMS commands are now mixed case 11/18/2008 10:07 AM Please respond to The IBM z/VM Operating System <[EMAIL PROTECTED] ARK.EDU> With 5.2, CMS (not xedit) anything entered in CMS converted to uppercase when the enter key was pressed. With 5.4, the characters no longer convert to uppercase. Can this be changed via a command to CP or CMS? Ray Waters NOTICE: This e-mail is intended solely for the use of the individual to whom it is addressed and may contain information that is privileged, confidential or otherwise exempt from disclosure. If the reader of this e-mail is not the intended recipient or the employee or agent responsible for delivering the message to the intended recipient, you are hereby notified that any dissemination, distribution, or copying of this communication is strictly prohibited. If you have received this communication in error, please immediately notify us by replying to the original message at the listed email address. Thank You.
