date:20081217

Re: [ilugd] assistance in setting up reliance mg-880

2008-12-17 Thread kamal dave

Dear Vijay/list,
Thanks for the swift help,  However, I am sorry to add that in mandriva there 
is no wvdial hence wvdial.conf does not exist.

Despite that i loaded wvdial rpm and tried to configure but same could not be 
activated.

Thanks again for the reference.  I would however appreciate if help could be 
initiated with reference to this.

Kamal Dave



--- On Thu, 12/18/08, Vijay Kakkar  wrote:

> From: Vijay Kakkar 
> Subject: Re: [ilugd] assistance in setting up reliance mg-880
> To: kamal_dave_advoc...@yahoo.com, "The Linux-Delhi mailing list" 
> 
> Date: Thursday, December 18, 2008, 12:40 PM
> Hi Kamal
> 
> On Thu, Dec 18, 2008 at 12:29 PM, kamal dave
> wrote:
> 
> > Hi list,
> >
> > I have Mandriva 2008 spring edition
> > I seek assistance in configuring reliance usb modem
> > the modem gets recognised as output in
> >  /proc/bus/usb/devices
> > Output:
> > …..
> > …..
> >
> > T:  Bus=03 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  6
> Spd=12  MxCh= 0
> > D:  Ver= 1.01 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=16
> #Cfgs=  1
> > P:  Vendor=19d2 ProdID=fffd Rev= 0.00
> > S:  Manufacturer=ZTE, Incorporated
> > S:  Product=ZTE CDMA Tech
> > S:  SerialNumber=Serial Number
> > C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA
> > I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff
> Driver=(none)
> > E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=128ms
> > E:  Ad=8a(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
> > E:  Ad=0b(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
> > I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff
> Driver=(none)
> > E:  Ad=83(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
> > E:  Ad=06(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
> > I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff
> Driver=(none)
> > E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
> > E:  Ad=05(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
> >
> > …..
> >
> > I have tried to configure reliance mg- 880 in KPPP
> > the device gets recognised as
> >
> > /dev/modem
> >
> > there i mentioned the phone number/ password
> > & dial string in dialer box
> >
> > #777
> >
> > but when i say connect it gives output
> >
> > modem is busy
> >
> >
> > but still unable to do configure
> >
> >
> > Thanks
> >
> > Kamal Dave
> 
> 
> I am also using the same Reliance  Data card,and  its
> working fine for me,i
> searched once on  the internet and found one very useful
> URL
> 
> please visit the  below URL ,i hope it will solve your
> problem
> 
> http://www.rimweb.in/forums/index.php?showtopic=5821
> 
> >
> >
> >
> >
> >
> > ___
> > ilugd mailinglist -- ilugd@lists.linux-delhi.org
> > http://frodo.hserus.net/mailman/listinfo/ilugd
> > Archives at:
> http://news.gmane.org/gmane.user-groups.linux.delhi
> >
> http://www.mail-archive.com/ilugd@lists.linux-delhi.org/
> >
> 
> 
> 
> -- 
> Warm Regards,
> Vijay Kakkar,  MCSA,RHCE,RHCI,RHCX
> Technical Consultant Global Learning Services
> Red Hat India Pvt. Ltd.
> Web:


  

___
ilugd mailinglist -- ilugd@lists.linux-delhi.org
http://frodo.hserus.net/mailman/listinfo/ilugd
Archives at: http://news.gmane.org/gmane.user-groups.linux.delhi 
http://www.mail-archive.com/ilugd@lists.linux-delhi.org/

Re: [ilugd] assistance in setting up reliance mg-880

2008-12-17 Thread Vijay Kakkar

Hi Kamal

On Thu, Dec 18, 2008 at 12:29 PM, kamal dave
wrote:

> Hi list,
>
> I have Mandriva 2008 spring edition
> I seek assistance in configuring reliance usb modem
> the modem gets recognised as output in
>  /proc/bus/usb/devices
> Output:
> …..
> …..
>
> T:  Bus=03 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  6 Spd=12  MxCh= 0
> D:  Ver= 1.01 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=16 #Cfgs=  1
> P:  Vendor=19d2 ProdID=fffd Rev= 0.00
> S:  Manufacturer=ZTE, Incorporated
> S:  Product=ZTE CDMA Tech
> S:  SerialNumber=Serial Number
> C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA
> I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
> E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=128ms
> E:  Ad=8a(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
> E:  Ad=0b(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
> I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
> E:  Ad=83(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
> E:  Ad=06(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
> I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
> E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
> E:  Ad=05(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
>
> …..
>
> I have tried to configure reliance mg- 880 in KPPP
> the device gets recognised as
>
> /dev/modem
>
> there i mentioned the phone number/ password
> & dial string in dialer box
>
> #777
>
> but when i say connect it gives output
>
> modem is busy
>
>
> but still unable to do configure
>
>
> Thanks
>
> Kamal Dave


I am also using the same Reliance  Data card,and  its working fine for me,i
searched once on  the internet and found one very useful URL

please visit the  below URL ,i hope it will solve your problem

http://www.rimweb.in/forums/index.php?showtopic=5821

>
>
>
>
>
> ___
> ilugd mailinglist -- ilugd@lists.linux-delhi.org
> http://frodo.hserus.net/mailman/listinfo/ilugd
> Archives at: http://news.gmane.org/gmane.user-groups.linux.delhi
> http://www.mail-archive.com/ilugd@lists.linux-delhi.org/
>



-- 
Warm Regards,
Vijay Kakkar,  MCSA,RHCE,RHCI,RHCX
Technical Consultant Global Learning Services
Red Hat India Pvt. Ltd.
Web:
___
ilugd mailinglist -- ilugd@lists.linux-delhi.org
http://frodo.hserus.net/mailman/listinfo/ilugd
Archives at: http://news.gmane.org/gmane.user-groups.linux.delhi 
http://www.mail-archive.com/ilugd@lists.linux-delhi.org/

[ilugd] assistance in setting up reliance mg-880

2008-12-17 Thread kamal dave

Hi list,

I have Mandriva 2008 spring edition
I seek assistance in configuring reliance usb modem
the modem gets recognised as output in 
 /proc/bus/usb/devices
Output:
…..
…..

T:  Bus=03 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  6 Spd=12  MxCh= 0
D:  Ver= 1.01 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=16 #Cfgs=  1
P:  Vendor=19d2 ProdID=fffd Rev= 0.00
S:  Manufacturer=ZTE, Incorporated
S:  Product=ZTE CDMA Tech
S:  SerialNumber=Serial Number
C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=128ms
E:  Ad=8a(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=0b(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E:  Ad=83(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=06(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=05(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms

…..

I have tried to configure reliance mg- 880 in KPPP
the device gets recognised as

/dev/modem

there i mentioned the phone number/ password 
& dial string in dialer box 

#777

but when i say connect it gives output

modem is busy


but still unable to do configure 


Thanks

Kamal Dave


  

___
ilugd mailinglist -- ilugd@lists.linux-delhi.org
http://frodo.hserus.net/mailman/listinfo/ilugd
Archives at: http://news.gmane.org/gmane.user-groups.linux.delhi 
http://www.mail-archive.com/ilugd@lists.linux-delhi.org/

Re: [ilugd] Looking for volunteers

2008-12-17 Thread Sudev Barar

2008/12/10 Sudev Barar :
> There is possibility of using our platform as Linux users by
> participating in a teaching workshop. Details are at
> http://wiki.linux-delhi.org/cgi-bin/twiki/view/Main/TrainingForNavalOfficers
>
> In case you are able to spare time and promote the FOSS cause please
> reply to this email ASAP.

As we did not get enough time to plan this nor volunteers at short
notice we have called off the hwole thing.

Thanks IAC to those who came forward to volunteer and/or organize this series.
Anand Shanker
Kishore
Sangeeta
Supreet
Satyakam
Tarun
Gora
Niyam
Raj

Sorry if I missed a name or two.
-- 
Regards,
Sudev Barar
Read http://blog.sudev.in for topics ranging from here to there.

PS: I know most of people do not follow email niceties (mostly they
are not aware) but if you follow bottom post/in-line post style of
email conversations it becomes a whole lot easier to carry on
meaningful dialogue and you can snip out what is not meaningful too.
Most people just hit reply button and top post leaving prior message
appended uselessly at bottom. See if you can adopt this style and
persuade others. In case you are already doing this . great,
spread the message.

___
ilugd mailinglist -- ilugd@lists.linux-delhi.org
http://frodo.hserus.net/mailman/listinfo/ilugd
Archives at: http://news.gmane.org/gmane.user-groups.linux.delhi 
http://www.mail-archive.com/ilugd@lists.linux-delhi.org/

[ilugd] Learn Embedded Technology From Industry Experts

2008-12-17 Thread Rajiv Batra

Dear All,

visit http://www.e-nalanda.com to learn  RTOS Fundamentals & Programming
using µCos, Embedded Linux, 32 Bit ARM Architecture & Programming, WinCE,
Linux Device Driver (LDD), Embedded C, Operating Systems Fundamentals (using
Linux), C, C++, 8 Bit Microcontroller Architecture...its good

Rajiv
___
ilugd mailinglist -- ilugd@lists.linux-delhi.org
http://frodo.hserus.net/mailman/listinfo/ilugd
Archives at: http://news.gmane.org/gmane.user-groups.linux.delhi 
http://www.mail-archive.com/ilugd@lists.linux-delhi.org/

Re: [ilugd] assistance in setting up reliance mg-880

Re: [ilugd] assistance in setting up reliance mg-880

[ilugd] assistance in setting up reliance mg-880

Re: [ilugd] Looking for volunteers

[ilugd] Learn Embedded Technology From Industry Experts

5 matches

Site Navigation

Mail list logo

Footer information