subject:"\[ilugd\] assistance in setting up reliance mg\-880"

Re: [ilugd] assistance in setting up reliance mg-880

2008-12-18 Thread kamal dave

Dear Vijay/List,
Thanks for the necessary help.   I was able to connect to net.

Thanks for the necessary help.

Kamal Dave



--- On Thu, 12/18/08, Vijay Kakkar  wrote:

> From: Vijay Kakkar 
> Subject: Re: [ilugd] assistance in setting up reliance mg-880
> To: kamal_dave_advoc...@yahoo.com, "The Linux-Delhi mailing list" 
> 
> Date: Thursday, December 18, 2008, 1:51 PM
> Hi
> 
> On Thu, Dec 18, 2008 at 12:59 PM, kamal dave
> wrote:
> 
> > Dear Vijay/list,
> > Thanks for the swift help,  However, I am sorry to add
> that in mandriva
> > there is no wvdial hence wvdial.conf does not exist.
> >
> > Despite that i loaded wvdial rpm and tried to
> configure but same could not
> > be activated.
> >
> > Thanks again for the reference.  I would however
> appreciate if help could
> > be initiated with reference to this.
> >
> > Kamal Dave
> >
> 
> this  link will sure help u out as its is based on the 
> most linux distro
> 
> http://ubuntuforums.org/archive/index.php/t-544618.html
> 
> if u still face any problem get back to the group i will
> send you the bare
> configuration
> 
> >
> >
> >
> >
> > --- On Thu, 12/18/08, Vijay Kakkar
>  wrote:
> >
> > > From: Vijay Kakkar 
> > > Subject: Re: [ilugd] assistance in setting up
> reliance mg-880
> > > To: kamal_dave_advoc...@yahoo.com, "The
> Linux-Delhi mailing list" <
> > ilugd@lists.linux-delhi.org>
> > > Date: Thursday, December 18, 2008, 12:40 PM
> > > Hi Kamal
> > >
> > > On Thu, Dec 18, 2008 at 12:29 PM, kamal dave
> > > wrote:
> > >
> > > > Hi list,
> > > >
> > > > I have Mandriva 2008 spring edition
> > > > I seek assistance in configuring reliance
> usb modem
> > > > the modem gets recognised as output in
> > > >  /proc/bus/usb/devices
> > > > Output:
> > > > …..
> > > > …..
> > > >
> > > > T:  Bus=03 Lev=01 Prnt=01 Port=00 Cnt=01
> Dev#=  6
> > > Spd=12  MxCh= 0
> > > > D:  Ver= 1.01 Cls=00(>ifc ) Sub=00
> Prot=00 MxPS=16
> > > #Cfgs=  1
> > > > P:  Vendor=19d2 ProdID=fffd Rev= 0.00
> > > > S:  Manufacturer=ZTE, Incorporated
> > > > S:  Product=ZTE CDMA Tech
> > > > S:  SerialNumber=Serial Number
> > > > C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA
> > > > I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.)
> Sub=ff Prot=ff
> > > Driver=(none)
> > > > E:  Ad=81(I) Atr=03(Int.) MxPS=  16
> Ivl=128ms
> > > > E:  Ad=8a(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
> > > > E:  Ad=0b(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
> > > > I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.)
> Sub=ff Prot=ff
> > > Driver=(none)
> > > > E:  Ad=83(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
> > > > E:  Ad=06(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
> > > > I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.)
> Sub=ff Prot=ff
> > > Driver=(none)
> > > > E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
> > > > E:  Ad=05(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
> > > >
> > > > …..
> > > >
> > > > I have tried to configure reliance mg- 880
> in KPPP
> > > > the device gets recognised as
> > > >
> > > > /dev/modem
> > > >
> > > > there i mentioned the phone number/ password
> > > > & dial string in dialer box
> > > >
> > > > #777
> > > >
> > > > but when i say connect it gives output
> > > >
> > > > modem is busy
> > > >
> > > >
> > > > but still unable to do configure
> > > >
> > > >
> > > > Thanks
> > > >
> > > > Kamal Dave
> > >
> > >
> > > I am also using the same Reliance  Data card,and 
> its
> > > working fine for me,i
> > > searched once on  the internet and found one very
> useful
> > > URL
> > >
> > > please visit the  below URL ,i hope it will solve
> your
> > > problem
> > >
> > >
> http://www.rimweb.in/forums/index.php?showtopic=5821
> > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> ___
> > > > ilugd mailinglist --
> ilugd@lists.linux-delhi.org
> > > >
> http://frodo.hserus.net/mailman/listinfo/ilugd
> > > > Archives at:
> > >
> http://news.gmane.org/gmane.user-groups.linux.delhi
> > > >
> > >
> http://www.mail-archive.com/ilugd@lists.linux-delhi.org/
> > > >
> > >
> > >
> > >
> > > --
> >
> >
> >
> >
> >
> > ___
> > ilugd mailinglist -- ilugd@lists.linux-delhi.org
> > http://frodo.hserus.net/mailman/listinfo/ilugd
> > Archives at:
> http://news.gmane.org/gmane.user-groups.linux.delhi
> >
> http://www.mail-archive.com/ilugd@lists.linux-delhi.org/
> >
> 
> 
> 
> -


  

___
ilugd mailinglist -- ilugd@lists.linux-delhi.org
http://frodo.hserus.net/mailman/listinfo/ilugd
Archives at: http://news.gmane.org/gmane.user-groups.linux.delhi 
http://www.mail-archive.com/ilugd@lists.linux-delhi.org/

Re: [ilugd] assistance in setting up reliance mg-880

2008-12-18 Thread Vijay Kakkar

Hi

On Thu, Dec 18, 2008 at 12:59 PM, kamal dave
wrote:

> Dear Vijay/list,
> Thanks for the swift help,  However, I am sorry to add that in mandriva
> there is no wvdial hence wvdial.conf does not exist.
>
> Despite that i loaded wvdial rpm and tried to configure but same could not
> be activated.
>
> Thanks again for the reference.  I would however appreciate if help could
> be initiated with reference to this.
>
> Kamal Dave
>

this  link will sure help u out as its is based on the  most linux distro

http://ubuntuforums.org/archive/index.php/t-544618.html

if u still face any problem get back to the group i will send you the bare
configuration

>
>
>
>
> --- On Thu, 12/18/08, Vijay Kakkar  wrote:
>
> > From: Vijay Kakkar 
> > Subject: Re: [ilugd] assistance in setting up reliance mg-880
> > To: kamal_dave_advoc...@yahoo.com, "The Linux-Delhi mailing list" <
> ilugd@lists.linux-delhi.org>
> > Date: Thursday, December 18, 2008, 12:40 PM
> > Hi Kamal
> >
> > On Thu, Dec 18, 2008 at 12:29 PM, kamal dave
> > wrote:
> >
> > > Hi list,
> > >
> > > I have Mandriva 2008 spring edition
> > > I seek assistance in configuring reliance usb modem
> > > the modem gets recognised as output in
> > >  /proc/bus/usb/devices
> > > Output:
> > > …..
> > > …..
> > >
> > > T:  Bus=03 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  6
> > Spd=12  MxCh= 0
> > > D:  Ver= 1.01 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=16
> > #Cfgs=  1
> > > P:  Vendor=19d2 ProdID=fffd Rev= 0.00
> > > S:  Manufacturer=ZTE, Incorporated
> > > S:  Product=ZTE CDMA Tech
> > > S:  SerialNumber=Serial Number
> > > C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA
> > > I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff
> > Driver=(none)
> > > E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=128ms
> > > E:  Ad=8a(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
> > > E:  Ad=0b(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
> > > I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff
> > Driver=(none)
> > > E:  Ad=83(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
> > > E:  Ad=06(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
> > > I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff
> > Driver=(none)
> > > E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
> > > E:  Ad=05(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
> > >
> > > …..
> > >
> > > I have tried to configure reliance mg- 880 in KPPP
> > > the device gets recognised as
> > >
> > > /dev/modem
> > >
> > > there i mentioned the phone number/ password
> > > & dial string in dialer box
> > >
> > > #777
> > >
> > > but when i say connect it gives output
> > >
> > > modem is busy
> > >
> > >
> > > but still unable to do configure
> > >
> > >
> > > Thanks
> > >
> > > Kamal Dave
> >
> >
> > I am also using the same Reliance  Data card,and  its
> > working fine for me,i
> > searched once on  the internet and found one very useful
> > URL
> >
> > please visit the  below URL ,i hope it will solve your
> > problem
> >
> > http://www.rimweb.in/forums/index.php?showtopic=5821
> >
> > >
> > >
> > >
> > >
> > >
> > > ___
> > > ilugd mailinglist -- ilugd@lists.linux-delhi.org
> > > http://frodo.hserus.net/mailman/listinfo/ilugd
> > > Archives at:
> > http://news.gmane.org/gmane.user-groups.linux.delhi
> > >
> > http://www.mail-archive.com/ilugd@lists.linux-delhi.org/
> > >
> >
> >
> >
> > --
>
>
>
>
>
> ___
> ilugd mailinglist -- ilugd@lists.linux-delhi.org
> http://frodo.hserus.net/mailman/listinfo/ilugd
> Archives at: http://news.gmane.org/gmane.user-groups.linux.delhi
> http://www.mail-archive.com/ilugd@lists.linux-delhi.org/
>



-
___
ilugd mailinglist -- ilugd@lists.linux-delhi.org
http://frodo.hserus.net/mailman/listinfo/ilugd
Archives at: http://news.gmane.org/gmane.user-groups.linux.delhi 
http://www.mail-archive.com/ilugd@lists.linux-delhi.org/

Re: [ilugd] assistance in setting up reliance mg-880

2008-12-18 Thread Vijay Kakkar

Hi Kamal

On Thu, Dec 18, 2008 at 12:59 PM, kamal dave
wrote:

> Dear Vijay/list,
> Thanks for the swift help,  However, I am sorry to add that in mandriva
> there is no wvdial hence wvdial.conf does not exist.
>
> Despite that i loaded wvdial rpm and tried to configure but same could not
> be activated.
>
> Thanks again for the reference.  I would however appreciate if help could
> be initiated with reference to this.
>
> Kamal Dave
>

i hope this one sure helo u out if you still face any problem get back to
group
i will send u the bare configuration.

>
>
>
>
> --- On Thu, 12/18/08, Vijay Kakkar  wrote:
>
> > From: Vijay Kakkar 
> > Subject: Re: [ilugd] assistance in setting up reliance mg-880
> > To: kamal_dave_advoc...@yahoo.com, "The Linux-Delhi mailing list" <
> ilugd@lists.linux-delhi.org>
> > Date: Thursday, December 18, 2008, 12:40 PM
> > Hi Kamal
> >
> > On Thu, Dec 18, 2008 at 12:29 PM, kamal dave
> > wrote:
> >
> > > Hi list,
> > >
> > > I have Mandriva 2008 spring edition
> > > I seek assistance in configuring reliance usb modem
> > > the modem gets recognised as output in
> > >  /proc/bus/usb/devices
> > > Output:
> > > …..
> > > …..
> > >
> > > T:  Bus=03 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  6
> > Spd=12  MxCh= 0
> > > D:  Ver= 1.01 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=16
> > #Cfgs=  1
> > > P:  Vendor=19d2 ProdID=fffd Rev= 0.00
> > > S:  Manufacturer=ZTE, Incorporated
> > > S:  Product=ZTE CDMA Tech
> > > S:  SerialNumber=Serial Number
> > > C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA
> > > I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff
> > Driver=(none)
> > > E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=128ms
> > > E:  Ad=8a(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
> > > E:  Ad=0b(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
> > > I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff
> > Driver=(none)
> > > E:  Ad=83(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
> > > E:  Ad=06(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
> > > I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff
> > Driver=(none)
> > > E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
> > > E:  Ad=05(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
> > >
> > > …..
> > >
> > > I have tried to configure reliance mg- 880 in KPPP
> > > the device gets recognised as
> > >
> > > /dev/modem
> > >
> > > there i mentioned the phone number/ password
> > > & dial string in dialer box
> > >
> > > #777
> > >
> > > but when i say connect it gives output
> > >
> > > modem is busy
> > >
> > >
> > > but still unable to do configure
> > >
> > >
> > > Thanks
> > >
> > > Kamal Dave
> >
> >
> > I am also using the same Reliance  Data card,and  its
> > working fine for me,i
> > searched once on  the internet and found one very useful
> > URL
> >
> > please visit the  below URL ,i hope it will solve your
> > problem
> >
> > http://www.rimweb.in/forums/index.php?showtopic=5821
> >
> > >
> > >
> > >
> > >
> > >
> > > ___
> > > ilugd mailinglist -- ilugd@lists.linux-delhi.org
> > > http://frodo.hserus.net/mailman/listinfo/ilugd
> > > Archives at:
> > http://news.gmane.org/gmane.user-groups.linux.delhi
> > >
> > http://www.mail-archive.com/ilugd@lists.linux-delhi.org/
> > >
> >
> >
> >
>
>
>
>
> ___
> ilugd mailinglist -- ilugd@lists.linux-delhi.org
> http://frodo.hserus.net/mailman/listinfo/ilugd
> Archives at: http://news.gmane.org/gmane.user-groups.linux.delhi
> http://www.mail-archive.com/ilugd@lists.linux-delhi.org/
>



-- >
___
ilugd mailinglist -- ilugd@lists.linux-delhi.org
http://frodo.hserus.net/mailman/listinfo/ilugd
Archives at: http://news.gmane.org/gmane.user-groups.linux.delhi 
http://www.mail-archive.com/ilugd@lists.linux-delhi.org/

Re: [ilugd] assistance in setting up reliance mg-880

2008-12-17 Thread kamal dave

Dear Vijay/list,
Thanks for the swift help,  However, I am sorry to add that in mandriva there 
is no wvdial hence wvdial.conf does not exist.

Despite that i loaded wvdial rpm and tried to configure but same could not be 
activated.

Thanks again for the reference.  I would however appreciate if help could be 
initiated with reference to this.

Kamal Dave



--- On Thu, 12/18/08, Vijay Kakkar  wrote:

> From: Vijay Kakkar 
> Subject: Re: [ilugd] assistance in setting up reliance mg-880
> To: kamal_dave_advoc...@yahoo.com, "The Linux-Delhi mailing list" 
> 
> Date: Thursday, December 18, 2008, 12:40 PM
> Hi Kamal
> 
> On Thu, Dec 18, 2008 at 12:29 PM, kamal dave
> wrote:
> 
> > Hi list,
> >
> > I have Mandriva 2008 spring edition
> > I seek assistance in configuring reliance usb modem
> > the modem gets recognised as output in
> >  /proc/bus/usb/devices
> > Output:
> > …..
> > …..
> >
> > T:  Bus=03 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  6
> Spd=12  MxCh= 0
> > D:  Ver= 1.01 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=16
> #Cfgs=  1
> > P:  Vendor=19d2 ProdID=fffd Rev= 0.00
> > S:  Manufacturer=ZTE, Incorporated
> > S:  Product=ZTE CDMA Tech
> > S:  SerialNumber=Serial Number
> > C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA
> > I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff
> Driver=(none)
> > E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=128ms
> > E:  Ad=8a(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
> > E:  Ad=0b(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
> > I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff
> Driver=(none)
> > E:  Ad=83(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
> > E:  Ad=06(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
> > I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff
> Driver=(none)
> > E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
> > E:  Ad=05(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
> >
> > …..
> >
> > I have tried to configure reliance mg- 880 in KPPP
> > the device gets recognised as
> >
> > /dev/modem
> >
> > there i mentioned the phone number/ password
> > & dial string in dialer box
> >
> > #777
> >
> > but when i say connect it gives output
> >
> > modem is busy
> >
> >
> > but still unable to do configure
> >
> >
> > Thanks
> >
> > Kamal Dave
> 
> 
> I am also using the same Reliance  Data card,and  its
> working fine for me,i
> searched once on  the internet and found one very useful
> URL
> 
> please visit the  below URL ,i hope it will solve your
> problem
> 
> http://www.rimweb.in/forums/index.php?showtopic=5821
> 
> >
> >
> >
> >
> >
> > ___
> > ilugd mailinglist -- ilugd@lists.linux-delhi.org
> > http://frodo.hserus.net/mailman/listinfo/ilugd
> > Archives at:
> http://news.gmane.org/gmane.user-groups.linux.delhi
> >
> http://www.mail-archive.com/ilugd@lists.linux-delhi.org/
> >
> 
> 
> 
> -- 
> Warm Regards,
> Vijay Kakkar,  MCSA,RHCE,RHCI,RHCX
> Technical Consultant Global Learning Services
> Red Hat India Pvt. Ltd.
> Web:<http://www.in.redhat.com/training>


  

___
ilugd mailinglist -- ilugd@lists.linux-delhi.org
http://frodo.hserus.net/mailman/listinfo/ilugd
Archives at: http://news.gmane.org/gmane.user-groups.linux.delhi 
http://www.mail-archive.com/ilugd@lists.linux-delhi.org/

Re: [ilugd] assistance in setting up reliance mg-880

2008-12-17 Thread Vijay Kakkar

Hi Kamal

On Thu, Dec 18, 2008 at 12:29 PM, kamal dave
wrote:

> Hi list,
>
> I have Mandriva 2008 spring edition
> I seek assistance in configuring reliance usb modem
> the modem gets recognised as output in
>  /proc/bus/usb/devices
> Output:
> …..
> …..
>
> T:  Bus=03 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  6 Spd=12  MxCh= 0
> D:  Ver= 1.01 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=16 #Cfgs=  1
> P:  Vendor=19d2 ProdID=fffd Rev= 0.00
> S:  Manufacturer=ZTE, Incorporated
> S:  Product=ZTE CDMA Tech
> S:  SerialNumber=Serial Number
> C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA
> I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
> E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=128ms
> E:  Ad=8a(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
> E:  Ad=0b(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
> I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
> E:  Ad=83(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
> E:  Ad=06(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
> I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
> E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
> E:  Ad=05(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
>
> …..
>
> I have tried to configure reliance mg- 880 in KPPP
> the device gets recognised as
>
> /dev/modem
>
> there i mentioned the phone number/ password
> & dial string in dialer box
>
> #777
>
> but when i say connect it gives output
>
> modem is busy
>
>
> but still unable to do configure
>
>
> Thanks
>
> Kamal Dave


I am also using the same Reliance  Data card,and  its working fine for me,i
searched once on  the internet and found one very useful URL

please visit the  below URL ,i hope it will solve your problem

http://www.rimweb.in/forums/index.php?showtopic=5821

>
>
>
>
>
> ___
> ilugd mailinglist -- ilugd@lists.linux-delhi.org
> http://frodo.hserus.net/mailman/listinfo/ilugd
> Archives at: http://news.gmane.org/gmane.user-groups.linux.delhi
> http://www.mail-archive.com/ilugd@lists.linux-delhi.org/
>



-- 
Warm Regards,
Vijay Kakkar,  MCSA,RHCE,RHCI,RHCX
Technical Consultant Global Learning Services
Red Hat India Pvt. Ltd.
Web:
___
ilugd mailinglist -- ilugd@lists.linux-delhi.org
http://frodo.hserus.net/mailman/listinfo/ilugd
Archives at: http://news.gmane.org/gmane.user-groups.linux.delhi 
http://www.mail-archive.com/ilugd@lists.linux-delhi.org/

[ilugd] assistance in setting up reliance mg-880

2008-12-17 Thread kamal dave

Hi list,

I have Mandriva 2008 spring edition
I seek assistance in configuring reliance usb modem
the modem gets recognised as output in 
 /proc/bus/usb/devices
Output:
…..
…..

T:  Bus=03 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  6 Spd=12  MxCh= 0
D:  Ver= 1.01 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=16 #Cfgs=  1
P:  Vendor=19d2 ProdID=fffd Rev= 0.00
S:  Manufacturer=ZTE, Incorporated
S:  Product=ZTE CDMA Tech
S:  SerialNumber=Serial Number
C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=128ms
E:  Ad=8a(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=0b(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E:  Ad=83(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=06(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=05(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms

…..

I have tried to configure reliance mg- 880 in KPPP
the device gets recognised as

/dev/modem

there i mentioned the phone number/ password 
& dial string in dialer box 

#777

but when i say connect it gives output

modem is busy


but still unable to do configure 


Thanks

Kamal Dave


  

___
ilugd mailinglist -- ilugd@lists.linux-delhi.org
http://frodo.hserus.net/mailman/listinfo/ilugd
Archives at: http://news.gmane.org/gmane.user-groups.linux.delhi 
http://www.mail-archive.com/ilugd@lists.linux-delhi.org/

Re: [ilugd] assistance in setting up reliance mg-880

Re: [ilugd] assistance in setting up reliance mg-880

Re: [ilugd] assistance in setting up reliance mg-880

Re: [ilugd] assistance in setting up reliance mg-880

Re: [ilugd] assistance in setting up reliance mg-880

[ilugd] assistance in setting up reliance mg-880

6 matches

Site Navigation

Mail list logo

Footer information