Joel Dahl writes:
Hi,
I installed a new Juniper EX2200 today, running Junos 11.4R5.7.
Upon every commit I get the following error message (but the commit succeeds):
root@testsw# commit check
LIBJNX_SNMP_ENGINE_SCAN_FAILURE: snmp_engine_read: fscanf :
/var/db/snmp_engine.db scann
ing: full_engine_id Error: Unknown error: 0
configuration check succeeds
It's also visible in the message log during boot.
Is this something I should be worried about? I haven't seen it before.
fscanf doesn't set errno, for the %m in the syslog message is
meaningless (Unknown error: 0). The LIBJNX_SNMP_ENGINE_SCAN_FAILURE error
is listed as:
phil@dent help syslog LIBJNX_SNMP_ENGINE_SCAN_FAILURE
Name: LIBJNX_SNMP_ENGINE_SCAN_FAILURE
Message: function-name: fscanf : filename scanning: data Error:
error-message
Help: SNMP engine data file scan operation failed
Description: A Junos process could not perform the scan operation on the
indicated SNMP
engine data file.
Type: Error: An error occurred
Severity: critical
Facility: ANY
Cause: An internal software failure occurred.
Action:Contact your technical support representative. For more
information, see
http://kb.juniper.net/InfoCenter/index?page=contentid=KB18953.
phil@dent
I'm having trouble getting to this link, but my guess is that there's
some broken data in your /var/db/snmp_engine.db file.
Thanks,
Phil
___
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp