[j-nsp] m10 re-333 latest version of junos
Hi list, I have a couple of old m10s with re-333s in them and I would like to upgrade them to whatever the last version of Junos code they can run. These are lab routers and not production. Can someone point me in the right direction? I've seen a few folks say 10.4 will work, but I only see the m120, m160, m320 etc on the downloads page. I assume the m120 image would work in this case? Thanks All! ___ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp
Re: [j-nsp] m10 re-333 latest version of junos
Depends a lot of which flavor you have with what memory This RE came with either 246M or 768M of memory and an 80MB flash Note: For M-series, MX-series, and T-series routing platforms, the CompactFlash card memory requirement for JUNOS software Release 9.0 is 1 GB. For M7i and M10i routing platforms with only 256 MB of memory, see the Customer Support Center JTAC Technical Bulletin PSN-2007-10-001: https://www.juniper.net/alerts/viewalert.jsp?txtAlertNumber=PSN-2007-10-001actionBtn=Search. Hope this helps On Sep 10, 2013, at 2:49 PM, N. Max Pierson nmaxpier...@gmail.com wrote: Hi list, I have a couple of old m10s with re-333s in them and I would like to upgrade them to whatever the last version of Junos code they can run. These are lab routers and not production. Can someone point me in the right direction? I've seen a few folks say 10.4 will work, but I only see the m120, m160, m320 etc on the downloads page. I assume the m120 image would work in this case? Thanks All! ___ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp ___ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp
Re: [j-nsp] m10 re-333 latest version of junos
Hi, Am 10.09.2013 21:49, schrieb N. Max Pierson: I have a couple of old m10s with re-333s in them and I would like to upgrade them to whatever the last version of Junos code they can run. These are lab routers and not production. Can someone point me in the right direction? I've seen a few folks say 10.4 will work, but I only see the m120, m160, m320 etc on the downloads page. I assume the m120 image would work in this case? We are currently running 10.4 (R9 i should upgrade them) on our lab M5s with RE2.0 or RE3.0. You can use the M-series, MX high end series T-series Install Package which is a universal image for all the m-series devices. In theory newer releases (11 or even 12) should work as well, but i have not tried it myself. It might be they removed support for EOL Hardware somewhere down the line. Depending on the release you come from you might need/want to use the M-series, MX high end series T-series Install Media if you do not want to perform a nearly endless upgrade chain. You might need additional compact flash to install the newer releases. We used off the shelf cf cards which just worked. If you can find some old memory it can be quite handy because the newer releases use lots of memory. This Router is currently idle with basically factory default configuration lab@LR2 show chassis routing-engine Routing Engine status: Temperature 36 degrees C / 96 degrees F CPU temperature 36 degrees C / 96 degrees F DRAM 384 MB Memory utilization 77 percent CPU utilization: User 0 percent Background 0 percent Kernel 1 percent Interrupt 0 percent Idle 98 percent Model RE-2.0 -- Kind Regards Tobias Heister ___ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp
Re: [j-nsp] m10 re-333 latest version of junos
I have the 768M flavor and have already upgraded the CF to 2GB. I'm currently on 8.5 and wanted to get to the latest version for these 2 lab boxes. I'll give 10.4 a shot for now. Thanks for all of the responses! On Tue, Sep 10, 2013 at 4:10 PM, Jerry Jones jjo...@danrj.com wrote: Depends a lot of which flavor you have with what memory This RE came with either 246M or 768M of memory and an 80MB flash *Note: *For M-series, MX-series, and T-series routing platforms, the CompactFlash card memory requirement for JUNOS software Release 9.0 is 1 GB. For M7i and M10i routing platforms with only 256 MB of memory, see the Customer Support Center JTAC Technical Bulletin PSN-2007-10-001: https://www.juniper.net/alerts/viewalert.jsp?txtAlertNumber=PSN-2007-10-001actionBtn=Search . Hope this helps On Sep 10, 2013, at 2:49 PM, N. Max Pierson nmaxpier...@gmail.com wrote: Hi list, I have a couple of old m10s with re-333s in them and I would like to upgrade them to whatever the last version of Junos code they can run. These are lab routers and not production. Can someone point me in the right direction? I've seen a few folks say 10.4 will work, but I only see the m120, m160, m320 etc on the downloads page. I assume the m120 image would work in this case? Thanks All! ___ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp ___ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp