[kstars] [Bug 410094] New: Kstars sometimes fails to wait for a slew to happen before slew is regarded as complete on the mount tool.
https://bugs.kde.org/show_bug.cgi?id=410094 Bug ID: 410094 Summary: Kstars sometimes fails to wait for a slew to happen before slew is regarded as complete on the mount tool. Product: kstars Version: git Platform: Compiled Sources OS: Linux Status: REPORTED Severity: normal Priority: NOR Component: general Assignee: mutla...@ikarustech.com Reporter: deathstal...@gmail.com Target Milestone: --- SUMMARY In some cases when using the mount model tool, KStars/Ekos has immediately decided the slew is over. Ex: [2019-07-19T01:17:54.891 CDT INFO ][ org.kde.kstars.ekos.align] - "Slewing to target coordinates: RA (00h 00m 00s) DEC ( 55° 51' 27\")." [2019-07-19T01:17:55.064 CDT INFO ][ org.kde.kstars.ekos.align] - "Slew complete. Solving Alignment Point. . ." [2019-07-19T01:17:55.065 CDT INFO ][ org.kde.kstars.ekos.align] - "Settling..." This comes from Align::processNumber in align.cpp, which seems to only check if the Equatorial coordinates show as IPS_OK, even if the mount has had no chance to update the status. (In this case I had it as 200ms, you'll note that the Slew to Slew Complete is less than that, and I think the default polling is something like 500ms from the lx200 derived drivers.) So it seems that there should be a minimum delay before it fires off, and/or a state change to/from tracking/slewing before it registers. Do note this is also kstars running on one machine, and gigabit ethernet to a mini pc (also running the same OS) It's also possible that the driver isn't doing something right, but based on what I can tell, the driver starts doing that immediately after a status update finishes. (Which is a little talky, but I don't belive that's the issue here.) Timeline which may be more clear: 2019-07-19T01:17:54.555 (Update, Mode: Tracking) 2019-07-19T01:17:54.870 (Command to sync sent to mount) 2019-07-19T01:17:54.891 (Ekos align module, says send to slew) 2019-07-19T01:17:54.951 (Update, Mode: Tracking as Command not yet sent) 2019-07-19T01:17:55.064 (Ekos regards slew as complete) 2019-07-19T01:17:55.096 (Command to Goto sent to mount) 2019-07-19T01:17:55.292 (Update, Mode: Slewing) 2019-07-19T01:17:55.365 (Ekos mount registers status change) 2019-07-19T01:17:55.660 (Update, Mode: Slewing) STEPS TO REPRODUCE 1. Keep Aligning and it will sometimes happen. It is not a regular thing. My assumption is that there is the condition of it getting to that case only sometimes. OBSERVED RESULT Using the mount model, sometimes the Align module decides it's done with the slew, even if the slew is far from complete. EXPECTED RESULT Wait for the slew, solve, sync, slew, until everything is done. As it does, some times. SOFTWARE/OS VERSIONS Kstars: (roughly 3.3.2) Build: 2019-07-03T05:13:32Z Operating System: Kubuntu 19.04 KDE Plasma Version: 5.15.4 KDE Frameworks Version: 5.56.0 Qt Version: 5.12.2 Kernel Version: 5.0.0-20-generic OS Type: 64-bit Processors: 8 × Intel® Core™ i7-4700HQ CPU @ 2.40GHz Memory: 23.5 GiB of RAM ADDITIONAL INFORMATION More complete log section, if needed the full one can be attached, but it is 213MB [2019-07-19T01:17:54.790 CDT INFO ][ org.kde.kstars.ekos.align] - "Solver completed in 4 seconds." [2019-07-19T01:17:54.798 CDT INFO ][ org.kde.kstars.ekos.align] - "Solution coordinates: RA (18h 35m 21s) DEC ( 38° 51' 53\") Telescope Coordinates: RA (18h 37m 35s) DEC ( 38° 48' 07\")" [2019-07-19T01:17:54.798 CDT DEBG ][ org.kde.kstars.indi] - ISD:Telescope: Syncing... [2019-07-19T01:17:54.803 CDT DEBG ][ org.kde.kstars.indi] - ISD:Telescope sending coords RA: "18h 35m 21s" ( 18.5893 ) DE: " 38° 51' 53\"" ( 38.8649 ) [2019-07-19T01:17:54.803 CDT INFO ][ org.kde.kstars.ekos.align] - "Syncing to RA (18h 35m 21s) DEC ( 38° 51' 53\")" [2019-07-19T01:17:54.840 CDT INFO ][ org.kde.kstars.indi] - Nikon DSLR DSC D5300 : "[INFO] Saving device configuration... " [2019-07-19T01:17:54.840 CDT DEBG ][ org.kde.kstars.indi] - LX200 OnStep : "[SCOPE] " [2019-07-19T01:17:54.840 CDT DEBG ][ org.kde.kstars.indi] - LX200 OnStep : "[SCOPE] CMD <:Sr 18:35:21#> " [2019-07-19T01:17:54.840 CDT INFO ][ org.kde.kstars.indi] - Nikon DSLR DSC D5300 : "[INFO] Device configuration saved. " [2019-07-19T01:17:54.841 CDT DEBG ][ org.kde.kstars.indi] - Nikon DSLR DSC D5300 : "[DEBUG] Configuration successfully saved. " [2019-07-19T01:17:54.842 CDT INFO ][ org.kde.kstars.indi] - Nikon DSLR DSC D5300 : "[INFO] CCD FOV rotation updated to -107.446 degrees. " [2019-07-19T01:17:54.853 CDT DEBG ][ org.kde.kstars.indi] - LX200 OnStep : "[SCOPE] CMD <:Sr 18:35:21#> successful. " [2019-07-19T01:17:54.854 CDT DEBG ][ org.kde.kstars.indi] - LX200 OnStep : "[SCOPE] " [2019-07-19T01:17:54.854 CDT DEBG ][ org.kde.kstars.indi] -
[krusader] [Bug 330788] "Information - Krusader" dialog does not fit to screen width; text non-copyable
https://bugs.kde.org/show_bug.cgi?id=330788 Nikita Melnichenko changed: What|Removed |Added Latest Commit|https://commits.kde.org/kru |https://commits.kde.org/kru |sader/11ad2b9ef22dbf8a160d5 |sader/258d9d122600b515d9008 |4270c4a67558c842748 |7b6cca1c69c478818ea --- Comment #15 from Nikita Melnichenko --- Git commit 258d9d122600b515d90087b6cca1c69c478818ea by Nikita Melnichenko, on behalf of Davide Gianforte. Committed on 22/07/2019 at 06:31. Pushed by melnichenko into branch 'stable'. Wrap text in copy/move confirmation dialog When you want to copy/move a file with a very long name, the confirmation dialog is opened very wide to respect the filename width. Wrapping the text let the dialog to be drawn at the usual width. FIXED: [ 330788 ] "Information - Krusader" dialog does not fit to screen width; text non-copyable Differential Revision: https://phabricator.kde.org/D22443 (cherry picked from commit 11ad2b9ef22dbf8a160d54270c4a67558c842748) M +4-1krusader/Dialogs/krdialogs.cpp https://commits.kde.org/krusader/258d9d122600b515d90087b6cca1c69c478818ea -- You are receiving this mail because: You are watching all bug changes.
[krusader] [Bug 167410] synchronize directory window: column widths are incorrect
https://bugs.kde.org/show_bug.cgi?id=167410 Nikita Melnichenko changed: What|Removed |Added Latest Commit|https://commits.kde.org/kru |https://commits.kde.org/kru |sader/0a5503a9792a348fde5e4 |sader/fc2090be0866f9754ad28 |7e0e06c02e69738cd22 |848e79d1cb70434403e --- Comment #13 from Nikita Melnichenko --- Git commit fc2090be0866f9754ad28848e79d1cb70434403e by Nikita Melnichenko. Committed on 22/07/2019 at 06:35. Pushed by melnichenko into branch 'stable'. Synchronizer: Set column headers to adjust widths automatically The user cannot resize the columns width anymore. FIXED: [ 167410 ] synchronize directory window: column widths are incorrect Differential Revision: https://phabricator.kde.org/D22174 (cherry picked from commit 0a5503a9792a348fde5e47e0e06c02e69738cd22) # Resolved conflicts: # krusader/Synchronizer/synchronizergui.cpp # krusader/Synchronizer/synchronizergui.h M +31 -69 krusader/Synchronizer/synchronizergui.cpp M +0-5krusader/Synchronizer/synchronizergui.h https://commits.kde.org/krusader/fc2090be0866f9754ad28848e79d1cb70434403e -- You are receiving this mail because: You are watching all bug changes.
[kwin] [Bug 410093] New: KWin crash after switch to/from text console
https://bugs.kde.org/show_bug.cgi?id=410093 Bug ID: 410093 Summary: KWin crash after switch to/from text console Product: kwin Version: 5.16.2 Platform: openSUSE RPMs OS: Linux Status: REPORTED Keywords: drkonqi Severity: crash Priority: NOR Component: general Assignee: kwin-bugs-n...@kde.org Reporter: memelink.ak...@planet.nl Target Milestone: --- Application: kwin_x11 (5.16.2) Qt Version: 5.13.0 Frameworks Version: 5.59.0 Operating System: Linux 5.1.16-1-default x86_64 Distribution: "openSUSE Tumbleweed" -- Information about the crash: - What I was doing when the application crashed: I switched to a text console (Ctrl-Shift-F1) and switched back to Plasma (Ctrl-Shift-F7). I got a message that KWin crashed. I chose "restart" and the UI (including the compositor) is working again. This is occuring every 2 or 3 days, usually after a "cold start" of the system, but is not ready reproducible (doesn't happen every time). -- Backtrace: Application: KWin (kwin_x11), signal: Segmentation fault Using host libthread_db library "/lib64/libthread_db.so.1". [Current thread is 1 (Thread 0x7f88f6a36880 (LWP 2230))] Thread 4 (Thread 0x7f88dd0d7700 (LWP 2426)): #0 0x7f88f9939e05 in pthread_cond_wait@@GLIBC_2.3.2 () at /lib64/libpthread.so.0 #1 0x7f88f9ded1ea in () at /usr/lib64/libQt5Script.so.5 #2 0x7f88f9ded20b in () at /usr/lib64/libQt5Script.so.5 #3 0x7f88f9933faa in start_thread () at /lib64/libpthread.so.0 #4 0x7f88fba1773f in clone () at /lib64/libc.so.6 Thread 3 (Thread 0x7f88ee093700 (LWP 2418)): #0 0x7f88fba24b3f in __libc_enable_asynccancel () at /lib64/libc.so.6 #1 0x7f88fba0cd94 in ppoll () at /lib64/libc.so.6 #2 0x7f88fa568d49 in qt_safe_poll(pollfd*, unsigned long, timespec const*) () at /usr/lib64/libQt5Core.so.5 #3 0x7f88fa56a341 in QEventDispatcherUNIX::processEvents(QFlags) () at /usr/lib64/libQt5Core.so.5 #4 0x7f88fa5152eb in QEventLoop::exec(QFlags) () at /usr/lib64/libQt5Core.so.5 #5 0x7f88fa34df91 in QThread::exec() () at /usr/lib64/libQt5Core.so.5 #6 0x7f88f90c6595 in () at /usr/lib64/libQt5Qml.so.5 #7 0x7f88fa34f112 in () at /usr/lib64/libQt5Core.so.5 #8 0x7f88f9933faa in start_thread () at /lib64/libpthread.so.0 #9 0x7f88fba1773f in clone () at /lib64/libc.so.6 Thread 2 (Thread 0x7f88efe0c700 (LWP 2262)): #0 0x7f88fba0cdb6 in ppoll () at /lib64/libc.so.6 #1 0x7f88fa568d49 in qt_safe_poll(pollfd*, unsigned long, timespec const*) () at /usr/lib64/libQt5Core.so.5 #2 0x7f88fa56a341 in QEventDispatcherUNIX::processEvents(QFlags) () at /usr/lib64/libQt5Core.so.5 #3 0x7f88fa5152eb in QEventLoop::exec(QFlags) () at /usr/lib64/libQt5Core.so.5 #4 0x7f88fa34df91 in QThread::exec() () at /usr/lib64/libQt5Core.so.5 #5 0x7f88f8b244f6 in () at /usr/lib64/libQt5DBus.so.5 #6 0x7f88fa34f112 in () at /usr/lib64/libQt5Core.so.5 #7 0x7f88f9933faa in start_thread () at /lib64/libpthread.so.0 #8 0x7f88fba1773f in clone () at /lib64/libc.so.6 Thread 1 (Thread 0x7f88f6a36880 (LWP 2230)): [KCrash Handler] #6 0x7f88f9f7b812 in () at /usr/lib64/libkwin4_effect_builtins.so.1 #7 0x7f88fb7693c3 in KWin::EffectsHandlerImpl::drawWindow(KWin::EffectWindow*, int, QRegion, KWin::WindowPaintData&) () at /usr/lib64/libkwin.so.5 #8 0x7f88f9ff274e in () at /usr/lib64/libkwin4_effect_builtins.so.1 #9 0x7f88fb7693c3 in KWin::EffectsHandlerImpl::drawWindow(KWin::EffectWindow*, int, QRegion, KWin::WindowPaintData&) () at /usr/lib64/libkwin.so.5 #10 0x7f88fb775d7b in KWin::Scene::finalPaintWindow(KWin::EffectWindowImpl*, int, QRegion, KWin::WindowPaintData&) () at /usr/lib64/libkwin.so.5 #11 0x7f88fb76fa58 in KWin::EffectsHandlerImpl::paintWindow(KWin::EffectWindow*, int, QRegion, KWin::WindowPaintData&) () at /usr/lib64/libkwin.so.5 #12 0x7f88fa05ccab in KWin::Effect::paintWindow(KWin::EffectWindow*, int, QRegion, KWin::WindowPaintData&) () at /usr/lib64/libkwineffects.so.12 #13 0x7f88fb76fa03 in KWin::EffectsHandlerImpl::paintWindow(KWin::EffectWindow*, int, QRegion, KWin::WindowPaintData&) () at /usr/lib64/libkwin.so.5 #14 0x7f88fa05ccab in KWin::Effect::paintWindow(KWin::EffectWindow*, int, QRegion, KWin::WindowPaintData&) () at /usr/lib64/libkwineffects.so.12 #15 0x7f88fb76fa03 in KWin::EffectsHandlerImpl::paintWindow(KWin::EffectWindow*, int, QRegion, KWin::WindowPaintData&) () at /usr/lib64/libkwin.so.5 #16 0x7f88fb778c35 in KWin::Scene::paintWindow(KWin::Scene::Window*, int, QRegion, KWin::WindowQuadList) () at /usr/lib64/libkwin.so.5 #17 0x7f88fb779a36 in KWin::Scene::paintSimpleScreen(int, QRegion) () at /usr/lib64/libkwin.so.5 #18 0x7f88ece419e3 in () at /usr/lib64/qt5/plugins/org.kde.kwin.scenes/KWinSceneOpenGL.so #19 0x7f88fb778ae0 in KWin::Scene::finalPaintScreen(int, QRegion, KWin::ScreenP
[kmymoney] [Bug 410075] Combine the two options "View all accounts" and "Hide closed" accounts
https://bugs.kde.org/show_bug.cgi?id=410075 Martin Steigerwald changed: What|Removed |Added Keywords||usability -- You are receiving this mail because: You are watching all bug changes.
[kmymoney] [Bug 410075] Combine the two options "View all accounts" and "Hide closed" accounts
https://bugs.kde.org/show_bug.cgi?id=410075 Martin Steigerwald changed: What|Removed |Added Summary|Shows closed accounts |Combine the two options |despite option set to not |"View all accounts" and |show them |"Hide closed" accounts Ever confirmed|0 |1 Priority|NOR |LO Resolution|WAITINGFORINFO |--- Status|RESOLVED|REOPENED Severity|normal |wishlist --- Comment #5 from Martin Steigerwald --- (In reply to Thomas Baumgart from comment #4) > The default for "View all accounts" is off: […] > So is "Hide closed accounts": […] > The user must have found both and played with it if any of them is set :) Thing is: finding them both does not guarantee remembering them. Especially when the user found one and only at a later time the other and between both findings there was a year or so :) > Looking at the code, I am tempted to combine the two into one in a future > release. Any objections? Not from me. Reopening as a wish list bug with different title. Maybe directly within the "View" menu for easy discoverability? On the other hand the option may not be used all that much. -- You are receiving this mail because: You are watching all bug changes.
[yakuake] [Bug 410052] Commands for running instance via cli/yakuake-command
https://bugs.kde.org/show_bug.cgi?id=410052 Eike Hein changed: What|Removed |Added Status|REPORTED|NEEDSINFO Resolution|--- |WAITINGFORINFO --- Comment #1 from Eike Hein --- Most of these are possible via Yakuake's D-Bus scripting interface. Could you have a look at that and reopen if you find anything missing? -- You are receiving this mail because: You are watching all bug changes.
[kmymoney] [Bug 410091] Open sqlite database under kmymoney versions >= 5.0
https://bugs.kde.org/show_bug.cgi?id=410091 Thomas Baumgart changed: What|Removed |Added Version Fixed In||5.0.6 Latest Commit||https://commits.kde.org/kmy ||money/48c0b11efdcfa43217fc2 ||47443afda0d9b7a61c4 Resolution|--- |FIXED Status|REPORTED|RESOLVED --- Comment #1 from Thomas Baumgart --- Git commit 48c0b11efdcfa43217fc247443afda0d9b7a61c4 by Thomas Baumgart. Committed on 22/07/2019 at 06:17. Pushed by tbaumgart into branch '5.0'. Finish queries so that they do not block the db layout update process https://stackoverflow.com/questions/17057420/qt-sqlite-unable-to-fetch-row-database-locked gave me the necessary hint to find the cause. FIXED-IN: 5.0.6 M +2-0kmymoney/plugins/sql/mymoneystoragesql_p.h https://commits.kde.org/kmymoney/48c0b11efdcfa43217fc247443afda0d9b7a61c4 -- You are receiving this mail because: You are watching all bug changes.
[ark] [Bug 410092] Ark crash while trying to decompress a file.
https://bugs.kde.org/show_bug.cgi?id=410092 --- Comment #1 from Tony --- Created attachment 121672 --> https://bugs.kde.org/attachment.cgi?id=121672&action=edit Evidence How to reproduce. -- You are receiving this mail because: You are watching all bug changes.
[krita] [Bug 410055] filter layer and filter mask pop ups are locked to the center of the screen with dark opaque screen overlay
https://bugs.kde.org/show_bug.cgi?id=410055 --- Comment #5 from Toby --- it's the default GNOME 3 for 18.0.4 desktop -- You are receiving this mail because: You are watching all bug changes.
[ark] [Bug 410092] New: Ark crash while trying to decompress a file.
https://bugs.kde.org/show_bug.cgi?id=410092 Bug ID: 410092 Summary: Ark crash while trying to decompress a file. Product: ark Version: unspecified Platform: openSUSE RPMs OS: Linux Status: REPORTED Keywords: drkonqi Severity: crash Priority: NOR Component: general Assignee: elvis.angelac...@kde.org Reporter: jodr...@live.com CC: rthoms...@gmail.com Target Milestone: --- Application: ark (19.11.70) Qt Version: 5.13.0 Frameworks Version: 5.61.0 Operating System: Linux 5.1.16-1-default x86_64 Distribution: openSUSE Tumbleweed -- Information about the crash: - What I was doing when the application crashed: I downloaded linux-5.2-ck.zip and opened it in ark. Drag and drop linux-5.2-ck directory to my current dir ~/Documents Closing ark at this point will end in it hanging and if you chose to "wait longer" when prompted to terminate it it will end in it crashing. The crash can be reproduced every time. -- Backtrace: Application: Ark (ark), signal: Segmentation fault Using host libthread_db library "/lib64/libthread_db.so.1". [Current thread is 1 (Thread 0x7fa730593800 (LWP 19038))] Thread 3 (Thread 0x7fa728877700 (LWP 19051)): #0 0x7fa72d93f224 in g_mutex_unlock () from /usr/lib64/libglib-2.0.so.0 #1 0x7fa72d98d24d in ?? () from /usr/lib64/libglib-2.0.so.0 #2 0x7fa72d98d46f in g_main_context_iteration () from /usr/lib64/libglib-2.0.so.0 #3 0x7fa72f3aaceb in QEventDispatcherGlib::processEvents (this=0x7fa71c000b20, flags=...) at kernel/qeventdispatcher_glib.cpp:425 #4 0x7fa72f3532eb in QEventLoop::exec (this=this@entry=0x7fa728876d70, flags=..., flags@entry=...) at ../../include/QtCore/../../src/corelib/global/qflags.h:140 #5 0x7fa72f18bf91 in QThread::exec (this=) at ../../include/QtCore/../../src/corelib/global/qflags.h:120 #6 0x7fa72e9b74f6 in ?? () from /usr/lib64/libQt5DBus.so.5 #7 0x7fa72f18d112 in QThreadPrivate::start (arg=0x7fa72ea39d80) at thread/qthread_unix.cpp:360 #8 0x7fa72e4b0faa in start_thread () from /lib64/libpthread.so.0 #9 0x7fa730b1573f in clone () from /lib64/libc.so.6 Thread 2 (Thread 0x7fa72a947700 (LWP 19048)): #0 0x7fa730b0acbf in poll () from /lib64/libc.so.6 #1 0x7fa72d3ed742 in ?? () from /usr/lib64/libxcb.so.1 #2 0x7fa72d3ee3fa in xcb_wait_for_event () from /usr/lib64/libxcb.so.1 #3 0x7fa72abb2f48 in QXcbEventQueue::run (this=0x55fd8aa65090) at qxcbeventqueue.cpp:228 #4 0x7fa72f18d112 in QThreadPrivate::start (arg=0x55fd8aa65090) at thread/qthread_unix.cpp:360 #5 0x7fa72e4b0faa in start_thread () from /lib64/libpthread.so.0 #6 0x7fa730b1573f in clone () from /lib64/libc.so.6 Thread 1 (Thread 0x7fa730593800 (LWP 19038)): [KCrash Handler] #6 0x0101 in ?? () #7 0x7fa73030798f in KJob::kill (this=0x55fd8c361b50, verbosity=verbosity@entry=KJob::Quietly) at /usr/src/debug/kcoreaddons-5.60.0git.20190713T082909~18b54cd-ku.73.1.x86_64/src/lib/jobs/kjob.cpp:117 #8 0x7fa721840603 in JobTracker::~JobTracker (this=, this=) at /usr/src/debug/ark-19.11.70git.20190717T225428~5bc23e40-ku.135.2.x86_64/part/jobtracker.cpp:42 #9 0x7fa721840669 in JobTracker::~JobTracker (this=, this=) at /usr/src/debug/ark-19.11.70git.20190717T225428~5bc23e40-ku.135.2.x86_64/part/jobtracker.cpp:44 #10 0x7fa72f37d65e in QObjectPrivate::deleteChildren (this=this@entry=0x55fd8af06360) at kernel/qobject.cpp:2019 #11 0x7fa72fdc7639 in QWidget::~QWidget (this=0x55fd8afa8ba0, __in_chrg=) at kernel/qwidget.cpp:1708 #12 0x7fa72fdc7829 in QWidget::~QWidget (this=0x55fd8afa8ba0, __in_chrg=) at kernel/qwidget.cpp:1570 #13 0x7fa730967817 in KParts::Part::~Part (this=, __vtt_parm=, this=, __vtt_parm=) at /usr/include/c++/9/bits/atomic_base.h:413 #14 0x7fa721861c5d in Ark::Part::~Part (this=, this=) at /usr/src/debug/ark-19.11.70git.20190717T225428~5bc23e40-ku.135.2.x86_64/part/interface.h:37 #15 0x7fa721861e89 in Ark::Part::~Part (this=, this=) at /usr/src/debug/ark-19.11.70git.20190717T225428~5bc23e40-ku.135.2.x86_64/part/part.cpp:242 #16 0x55fd89ff6cb7 in MainWindow::~MainWindow (this=, this=) at /usr/src/debug/ark-19.11.70git.20190717T225428~5bc23e40-ku.135.2.x86_64/app/mainwindow.cpp:76 #17 0x55fd89ff6d79 in MainWindow::~MainWindow (this=, this=) at /usr/src/debug/ark-19.11.70git.20190717T225428~5bc23e40-ku.135.2.x86_64/app/mainwindow.cpp:78 #18 0x7fa72f3800d0 in QObject::event (this=this@entry=0x55fd8af1d3f0, e=e@entry=0x55fd8b5477e0) at kernel/qobject.cpp:1251 #19 0x7fa72fdcbcb0 in QWidget::event (this=this@entry=0x55fd8af1d3f0, event=event@entry=0x55fd8b5477e0) at kernel/qwidget.cpp:9390 #20 0x7fa72fedee34 in QMainWindow::event (this=0x55fd8af1d3f0, event=0x55fd8b5477e0) at widgets/qmainwindow.cpp:1343 #21 0x7fa73062d653 in KMainWindow::event (this=, ev=) at /usr/src/debug/kxmlgui-5.60.0git.20190719T1
[kmymoney] [Bug 410091] New: Open sqlite database under kmymoney versions >= 5.0
https://bugs.kde.org/show_bug.cgi?id=410091 Bug ID: 410091 Summary: Open sqlite database under kmymoney versions >= 5.0 Product: kmymoney Version: 5.0.5 Platform: Other OS: Linux Status: REPORTED Severity: major Priority: NOR Component: database Assignee: kmymoney-de...@kde.org Reporter: tbaumg...@kde.org Target Milestone: --- Created attachment 121671 --> https://bugs.kde.org/attachment.cgi?id=121671&action=edit Empty database showing the problem SUMMARY An sqlite database created with a prior version of KMyMoney (e.g. 4.7.2) cannot be opened with recent versions (>= 5.0) STEPS TO REPRODUCE 1. Open existing database created with older version of KMyMoney OBSERVED RESULT An error is displayed, that the database cannot be opened. EXPECTED RESULT Database opens without problems ADDITIONAL INFORMATION The problem has initially been reported on https://forum.kde.org/viewtopic.php?f=69&t=161485 The database can be opened using e.g. sqlitebrowser and seems to be ok (contains all tables and data items). The details of the error message contain the following information: Error in function bool MyMoneyStorageSqlPrivate::alterTable(const MyMoneyDbTable&, int) : Error dropping index from kmmSplits Driver = QSQLITE, Host = localhost, User = thb, Database = //home/thb/xxx.db Driver Error: Database Error No -1: Text: Error type 0 Executed: Query error No 6: database table is locked Unable to fetch row Error type 1 It is unsure if this also applies to MySQL databases. -- You are receiving this mail because: You are watching all bug changes.
[digikam] [Bug 410085] Can't import from Google Photos
https://bugs.kde.org/show_bug.cgi?id=410085 Maik Qualmann changed: What|Removed |Added Component|Interroperability |Plugin-WebService-Google -- You are receiving this mail because: You are watching all bug changes.
[digikam] [Bug 410085] Can't import from Google Photos
https://bugs.kde.org/show_bug.cgi?id=410085 Maik Qualmann changed: What|Removed |Added Latest Commit||https://invent.kde.org/kde/ ||digikam/commit/c9f9433d52a6 ||74db08a0e9442d3d6304041f626 ||b Status|REPORTED|RESOLVED Resolution|--- |FIXED Version Fixed In||6.2.0 --- Comment #2 from Maik Qualmann --- Git commit c9f9433d52a674db08a0e9442d3d6304041f626b by Maik Qualmann. Committed on 22/07/2019 at 05:51. Pushed by mqualmann into branch 'master'. remove album from Google Photo import FIXED-IN: 6.2.0 M +2-1NEWS M +6-0core/dplugins/generic/webservices/google/gswindow.cpp https://invent.kde.org/kde/digikam/commit/c9f9433d52a674db08a0e9442d3d6304041f626b -- You are receiving this mail because: You are watching all bug changes.
[kmymoney] [Bug 410075] Shows closed accounts despite option set to not show them
https://bugs.kde.org/show_bug.cgi?id=410075 Thomas Baumgart changed: What|Removed |Added Resolution|NOT A BUG |WAITINGFORINFO --- Comment #4 from Thomas Baumgart --- The default for "View all accounts" is off: Show all accounts false So is "Hide closed accounts": Hide closed accounts false The user must have found both and played with it if any of them is set :) Looking at the code, I am tempted to combine the two into one in a future release. Any objections? -- You are receiving this mail because: You are watching all bug changes.
[plasma-pa] [Bug 385041] When "Raise maximum volume" is checked, I can't set a volume level beyond 100% using special keyboard keys
https://bugs.kde.org/show_bug.cgi?id=385041 Alexander Potashev changed: What|Removed |Added CC||aspotas...@gmail.com -- You are receiving this mail because: You are watching all bug changes.
[plasma-pa] [Bug 393931] Original volume played rather than target
https://bugs.kde.org/show_bug.cgi?id=393931 Alexander Potashev changed: What|Removed |Added CC||aspotas...@gmail.com -- You are receiving this mail because: You are watching all bug changes.
[plasma-pa] [Bug 404387] Allow to set a maximum volume less than 100%
https://bugs.kde.org/show_bug.cgi?id=404387 Alexander Potashev changed: What|Removed |Added CC||aspotas...@gmail.com -- You are receiving this mail because: You are watching all bug changes.
[gwenview] [Bug 410083] Gwenview Crashes on Wayland when opening Picture from overview
https://bugs.kde.org/show_bug.cgi?id=410083 --- Comment #2 from pyro4h...@gmail.com --- yes OpenGL is enabled and switching to the software renderer works around the bug -- You are receiving this mail because: You are watching all bug changes.
[kxkb] [Bug 177889] add ability to configure multiple keyboards
https://bugs.kde.org/show_bug.cgi?id=177889 --- Comment #6 from Keven L. Ates --- The /proc/bus/input/devices file list these entries which might help to uniquely identify devices: 1. Name 2. Phys 3. Sysfs 4. Uniq Sometimes the Phys and Uniq look like they are using MAC, other times not or not used at all. Phys always has something. However, for my systems, I always see at least two keyboards (when I really only have one): one named by manufacturer AND a second "AT Translated Set 2 keyboard". What is KDE actually using as the keyboard device? Is the "AT Translated Set 2 keyboard" the default? -- You are receiving this mail because: You are watching all bug changes.
[krita] [Bug 410015] brushes on krita are moving incorrectly
https://bugs.kde.org/show_bug.cgi?id=410015 vanyossi changed: What|Removed |Added Status|REPORTED|NEEDSINFO Resolution|--- |WAITINGFORINFO --- Comment #10 from vanyossi --- back to needsinfo -- You are receiving this mail because: You are watching all bug changes.
[krita] [Bug 410055] filter layer and filter mask pop ups are locked to the center of the screen with dark opaque screen overlay
https://bugs.kde.org/show_bug.cgi?id=410055 vanyossi changed: What|Removed |Added Resolution|--- |WAITINGFORINFO Status|REPORTED|NEEDSINFO --- Comment #4 from vanyossi --- When we fixed bug 408867 we created this behaviour. What Desktop Environment are you using in your Ubuntu? (as said before on KDE this is an easy fix). I need to know to try and reproduce what you are getting and try to fix it without breaking the previous fix. -- You are receiving this mail because: You are watching all bug changes.
[digikam] [Bug 410085] Can't import from Google Photos
https://bugs.kde.org/show_bug.cgi?id=410085 Maik Qualmann changed: What|Removed |Added CC||metzping...@gmail.com --- Comment #1 from Maik Qualmann --- You can not download anything from the album . Select the correct album you want to download first. Major corrections for Google Photos import are made in digiKam-6.2.0. Maik -- You are receiving this mail because: You are watching all bug changes.
[kompare] [Bug 391405] Comparing files impossible, since button is greyed out
https://bugs.kde.org/show_bug.cgi?id=391405 --- Comment #3 from Jeremy Whiting --- Just pushed a fix for this to kompare in git. Fix will be included in 19.08 RC (but just missed beta tag by a couple of days). -- You are receiving this mail because: You are watching all bug changes.
[kompare] [Bug 390024] "Compare" button not enabled on the initial dialog even after filling the file names
https://bugs.kde.org/show_bug.cgi?id=390024 Jeremy Whiting changed: What|Removed |Added Status|CONFIRMED |RESOLVED Resolution|--- |FIXED --- Comment #15 from Jeremy Whiting --- Just pushed a fix for this issue to master branch. It will be in the next release 19.08 I believe, Missed the tag for 19.08 beta, but will be in the RC and release. -- You are receiving this mail because: You are watching all bug changes.
[kwin] [Bug 400658] Impossible to walk through all apps or all windows of the current app on Wayland while numlock is enabled
https://bugs.kde.org/show_bug.cgi?id=400658 --- Comment #21 from Markus Rathgeb --- $ localectl status System Locale: LANG=en_US.utf8 VC Keymap: de-latin1 X11 Layout: de X11 Model: pc105 X11 Options: terminate:ctrl_alt_bksp For KDE: systemsettings5, Hardware: Input Devices, Keyboard: Hardware: Keyboard Model: Generic | Generic 105-key PC (intl.) Layouts: Map: de, Layout: German, Variant: German (no dead keys), Label:de, Shortcut: -- You are receiving this mail because: You are watching all bug changes.
[kxkb] [Bug 177889] add ability to configure multiple keyboards
https://bugs.kde.org/show_bug.cgi?id=177889 Keven L. Ates changed: What|Removed |Added CC||atesc...@gmail.com --- Comment #5 from Keven L. Ates --- No movement since 2013. This seems to be a simple addition to the "KDE Keyboard Control Module". For that matter, "Mouse", "KDE Joystick Control Module", and "Touchpad KCM" as well. Odd that they have wildly different documented names in their help. I propose a dropdown or tab listing the related objects in each module as presented in /dev/input/ directory (or /proc/bus/input/devices file)...or however KDE is getting and coordinating the device names and types. The biggest problem is restoring devices of same type. They may not be guaranteed to have the same prior event #, so order may not be preserved. Some solutions: 1. Bluetooth devices can have unique names. 2. Serial numbers? I don't know if every device has or can report a serial number. -- You are receiving this mail because: You are watching all bug changes.
[kwin] [Bug 409565] kwin crashes after reinstall
https://bugs.kde.org/show_bug.cgi?id=409565 --- Comment #6 from Bug Janitor Service --- Dear Bug Submitter, This bug has been in NEEDSINFO status with no change for at least 15 days. Please provide the requested information as soon as possible and set the bug status as REPORTED. Due to regular bug tracker maintenance, if the bug is still in NEEDSINFO status with no change in 30 days the bug will be closed as RESOLVED > WORKSFORME due to lack of needed information. For more information about our bug triaging procedures please read the wiki located here: https://community.kde.org/Guidelines_and_HOWTOs/Bug_triaging If you have already provided the requested information, please mark the bug as REPORTED so that the KDE team knows that the bug is ready to be confirmed. Thank you for helping us make KDE software even better for everyone! -- You are receiving this mail because: You are watching all bug changes.
[plasmashell] [Bug 405921] Plasma crashes when dragging task from taskmanager to a different virtual desktop
https://bugs.kde.org/show_bug.cgi?id=405921 Bug Janitor Service changed: What|Removed |Added Resolution|WAITINGFORINFO |WORKSFORME Status|NEEDSINFO |RESOLVED --- Comment #3 from Bug Janitor Service --- This bug has been in NEEDSINFO status with no change for at least 30 days. The bug is now closed as RESOLVED > WORKSFORME due to lack of needed information. For more information about our bug triaging procedures please read the wiki located here: https://community.kde.org/Guidelines_and_HOWTOs/Bug_triaging Thank you for helping us make KDE software even better for everyone! -- You are receiving this mail because: You are watching all bug changes.
[krita] [Bug 410015] brushes on krita are moving incorrectly
https://bugs.kde.org/show_bug.cgi?id=410015 Bug Janitor Service changed: What|Removed |Added Status|NEEDSINFO |REPORTED Resolution|WAITINGFORINFO |--- --- Comment #9 from Bug Janitor Service --- Thanks for your comment! Automatically switching the status of this bug to REPORTED so that the KDE team knows that the bug is ready to get confirmed. In the future you may also do this yourself when providing needed information. -- You are receiving this mail because: You are watching all bug changes.
[okular] [Bug 408743] Typewriter tool not showing in okular annotations.
https://bugs.kde.org/show_bug.cgi?id=408743 Bug Janitor Service changed: What|Removed |Added Status|NEEDSINFO |RESOLVED Resolution|WAITINGFORINFO |WORKSFORME --- Comment #5 from Bug Janitor Service --- This bug has been in NEEDSINFO status with no change for at least 30 days. The bug is now closed as RESOLVED > WORKSFORME due to lack of needed information. For more information about our bug triaging procedures please read the wiki located here: https://community.kde.org/Guidelines_and_HOWTOs/Bug_triaging Thank you for helping us make KDE software even better for everyone! -- You are receiving this mail because: You are watching all bug changes.
[krita] [Bug 410055] filter layer and filter mask pop ups are locked to the center of the screen with dark opaque screen overlay
https://bugs.kde.org/show_bug.cgi?id=410055 Bug Janitor Service changed: What|Removed |Added Status|NEEDSINFO |REPORTED Resolution|WAITINGFORINFO |--- --- Comment #3 from Bug Janitor Service --- Thanks for your comment! Automatically switching the status of this bug to REPORTED so that the KDE team knows that the bug is ready to get confirmed. In the future you may also do this yourself when providing needed information. -- You are receiving this mail because: You are watching all bug changes.
[kdiff3] [Bug 357698] Reproducible “mergeResultSaved: m_pMFI=0”.
https://bugs.kde.org/show_bug.cgi?id=357698 --- Comment #2 from Bug Janitor Service --- Dear Bug Submitter, This bug has been in NEEDSINFO status with no change for at least 15 days. Please provide the requested information as soon as possible and set the bug status as REPORTED. Due to regular bug tracker maintenance, if the bug is still in NEEDSINFO status with no change in 30 days the bug will be closed as RESOLVED > WORKSFORME due to lack of needed information. For more information about our bug triaging procedures please read the wiki located here: https://community.kde.org/Guidelines_and_HOWTOs/Bug_triaging If you have already provided the requested information, please mark the bug as REPORTED so that the KDE team knows that the bug is ready to be confirmed. Thank you for helping us make KDE software even better for everyone! -- You are receiving this mail because: You are watching all bug changes.
[kdiff3] [Bug 120399] KDiff3 doesn't show arabic characters correctly
https://bugs.kde.org/show_bug.cgi?id=120399 michael changed: What|Removed |Added Assignee|joachim.e...@gmx.de |reeves...@gmail.com Status|ASSIGNED|NEEDSINFO Resolution|--- |WAITINGFORINFO Summary|Kompare doesnt show arabic |KDiff3 doesn't show arabic |characters correctly|characters correctly --- Comment #3 from michael --- Could you verify if this still happens in 1.8? --- Comment #4 from Bug Janitor Service --- Dear Bug Submitter, This bug has been in NEEDSINFO status with no change for at least 15 days. Please provide the requested information as soon as possible and set the bug status as REPORTED. Due to regular bug tracker maintenance, if the bug is still in NEEDSINFO status with no change in 30 days the bug will be closed as RESOLVED > WORKSFORME due to lack of needed information. For more information about our bug triaging procedures please read the wiki located here: https://community.kde.org/Guidelines_and_HOWTOs/Bug_triaging If you have already provided the requested information, please mark the bug as REPORTED so that the KDE team knows that the bug is ready to be confirmed. Thank you for helping us make KDE software even better for everyone! -- You are receiving this mail because: You are watching all bug changes.
[krita] [Bug 409909] Crash closing krita after deleting session [gdb backtrace]
https://bugs.kde.org/show_bug.cgi?id=409909 vanyossi changed: What|Removed |Added Resolution|--- |FIXED Latest Commit||https://invent.kde.org/kde/ ||krita/commit/7a98356d68500d ||3b97ca3479410a54d7a3ec4f3e Status|REPORTED|RESOLVED --- Comment #5 from vanyossi --- Git commit 7a98356d68500d3b97ca3479410a54d7a3ec4f3e by Ivan Yossi. Committed on 22/07/2019 at 04:16. Pushed by ivany into branch 'master'. Remove deleted session pointer from KisPart currentSession M +1-0libs/ui/dialogs/KisSessionManagerDialog.cpp https://invent.kde.org/kde/krita/commit/7a98356d68500d3b97ca3479410a54d7a3ec4f3e -- You are receiving this mail because: You are watching all bug changes.
[dolphin] [Bug 410061] Dolphin fails to restore window state (on restart) to maximized when running on wayland
https://bugs.kde.org/show_bug.cgi?id=410061 --- Comment #8 from Yogesh Marwaha --- This behavior is applicable for all KDE applications I have used/tried (dolphin, konsole, ksysguard, okular, gwenview, system settings, many KDE games (not tried all of them)) under wayland. Other non-KDE applications I use seem to work fine (e.g. Firefox, Gnu Cash, FileZilla, Chromium, Android Studio). -- You are receiving this mail because: You are watching all bug changes.
[krita] [Bug 410055] filter layer and filter mask pop ups are locked to the center of the screen with dark opaque screen overlay
https://bugs.kde.org/show_bug.cgi?id=410055 --- Comment #2 from Toby --- (In reply to vanyossi from comment #1) > Hi! > > Im sorry but this is not a bug in krita but a behaviour on your window > manager. Try to see if you can disable dark overlay for popup windows system > wise. > > Im using xfce and macOs and none of them have that problem, o Kde by default > the parent modal dialogs darken the background. To disable: > > - KDE Settings > Desktop Effects > Dialog Parent: disable > - Apply > > On KDE by default it is possible to move the window, so to move a modal > window you will need to move something else in your system preferences. What > desktop environment are you using? > > Disabling this might be a little different on other desktop environments. Not sure this is the case for Linux users as this issue is only for these two specific layer types. I'm running Ubuntu 18.0.4 and I can run the v4.2.1 app image and everything works as normal. It's any app image version after that the issue has become a problem. For pretty much all the other pop up windows in Krita they are fine, it's these two layer types that have changed since v4.2.1. -- You are receiving this mail because: You are watching all bug changes.
[krita] [Bug 410015] brushes on krita are moving incorrectly
https://bugs.kde.org/show_bug.cgi?id=410015 vanyossi changed: What|Removed |Added CC||ghe...@gmail.com --- Comment #8 from vanyossi --- Please attach a screenrecording of krita running. Use your cellphone if you feel the krita running device is not up to the task, and can you cna show your tablet movement alongside the cursor movement. However if the computer you are using is so slow that it can't record the screen it may not be able to run krita properly. Your system must be one of the following: Windows (7,8,10), Linux (distros), macOS (High Sierra, Mojave, Catalina). if Linux tell us the desktop environment you are using. Also write here your system specs -- You are receiving this mail because: You are watching all bug changes.
[krita] [Bug 410053] Krita closes with Assert in kis_shortcut_matcher.cpp
https://bugs.kde.org/show_bug.cgi?id=410053 vanyossi changed: What|Removed |Added CC||ghe...@gmail.com Resolution|--- |DUPLICATE Status|REPORTED|RESOLVED --- Comment #3 from vanyossi --- *** This bug has been marked as a duplicate of bug 409968 *** -- You are receiving this mail because: You are watching all bug changes.
[krita] [Bug 409968] Text tool gives abort message pop up when trying to edit existing text
https://bugs.kde.org/show_bug.cgi?id=409968 vanyossi changed: What|Removed |Added CC||katearche...@yandex.ru --- Comment #10 from vanyossi --- *** Bug 410053 has been marked as a duplicate of this bug. *** -- You are receiving this mail because: You are watching all bug changes.
[krita] [Bug 410055] filter layer and filter mask pop ups are locked to the center of the screen with dark opaque screen overlay
https://bugs.kde.org/show_bug.cgi?id=410055 vanyossi changed: What|Removed |Added Assignee|krita-bugs-n...@kde.org |ghe...@gmail.com -- You are receiving this mail because: You are watching all bug changes.
[systemsettings] [Bug 409518] Visiting Fonts KCM changes antialliasing settings without warning
https://bugs.kde.org/show_bug.cgi?id=409518 Patrick Silva changed: What|Removed |Added CC||bugsefor...@gmx.com -- You are receiving this mail because: You are watching all bug changes.
[krita] [Bug 409968] Text tool gives abort message pop up when trying to edit existing text
https://bugs.kde.org/show_bug.cgi?id=409968 vanyossi changed: What|Removed |Added Status|REPORTED|CONFIRMED Ever confirmed|0 |1 -- You are receiving this mail because: You are watching all bug changes.
[krita] [Bug 409968] Text tool gives abort message pop up when trying to edit existing text
https://bugs.kde.org/show_bug.cgi?id=409968 vanyossi changed: What|Removed |Added CC||ghe...@gmail.com --- Comment #9 from vanyossi --- Created attachment 121670 --> https://bugs.kde.org/attachment.cgi?id=121670&action=edit gdb log of session leading to assert. I can consistently recreate the assert following the steps given Kubuntu: 18.04 bionic krita 4.2.3 After the assert is trown, ignore will recover control of mouse but every event action will trigger the assert again. It is not possible to paint at all after this (events are locked). I attach the gdb log of the run that led to the assert (not a lot of info but it may be useful). The bug cannot be replicated in macOS -- You are receiving this mail because: You are watching all bug changes.
[krita] [Bug 410055] filter layer and filter mask pop ups are locked to the center of the screen with dark opaque screen overlay
https://bugs.kde.org/show_bug.cgi?id=410055 vanyossi changed: What|Removed |Added CC||ghe...@gmail.com Resolution|--- |WAITINGFORINFO Status|REPORTED|NEEDSINFO --- Comment #1 from vanyossi --- Hi! Im sorry but this is not a bug in krita but a behaviour on your window manager. Try to see if you can disable dark overlay for popup windows system wise. Im using xfce and macOs and none of them have that problem, o Kde by default the parent modal dialogs darken the background. To disable: - KDE Settings > Desktop Effects > Dialog Parent: disable - Apply On KDE by default it is possible to move the window, so to move a modal window you will need to move something else in your system preferences. What desktop environment are you using? Disabling this might be a little different on other desktop environments. -- You are receiving this mail because: You are watching all bug changes.
[krita] [Bug 410015] brushes on krita are moving incorrectly
https://bugs.kde.org/show_bug.cgi?id=410015 --- Comment #7 from ldoug...@gmail.com --- (In reply to Ahab Greybeard from comment #5) > Which operating system are you using? > > When you move your bamboo pen on your tablet, the krita brushes dont move > along with your bamboo pen: What do they do? Do they stay still? Do they lag > behind? Do they move in a totally different direction? > > When you try to draw like a circle or something, the brushes on krita wont > draw a circle: What do they draw? Nothing? An ellipse? > > Can you attach a full screenshot of the end result of your trying to draw a > circle that includes the Tool Options docker? I cant make a screenshot or anything because this is a different device than the one that krita is set up on and that device is old and slow so im not sure if it even has an email set up to it -- You are receiving this mail because: You are watching all bug changes.
[krita] [Bug 410015] brushes on krita are moving incorrectly
https://bugs.kde.org/show_bug.cgi?id=410015 --- Comment #6 from ldoug...@gmail.com --- (In reply to Ahab Greybeard from comment #5) > Which operating system are you using? > > When you move your bamboo pen on your tablet, the krita brushes dont move > along with your bamboo pen: What do they do? Do they stay still? Do they lag > behind? Do they move in a totally different direction? > > When you try to draw like a circle or something, the brushes on krita wont > draw a circle: What do they draw? Nothing? An ellipse? > > Can you attach a full screenshot of the end result of your trying to draw a > circle that includes the Tool Options docker? I dont know what operating system it is. When i move my pen to draw a line the brushes move slower than my pen and when i go back and forth on a line to make it look better the bryshes hardly move at all. When i try to draw a circle or something like that the brushes wont follow my bamboo pen and wont make a circle itll just make a slight curve -- You are receiving this mail because: You are watching all bug changes.
[krita] [Bug 410079] All brushes cant be used on surface Pro 3 dotted lines
https://bugs.kde.org/show_bug.cgi?id=410079 vanyossi changed: What|Removed |Added Resolution|--- |WAITINGFORINFO CC||ghe...@gmail.com Status|REPORTED|NEEDSINFO --- Comment #1 from vanyossi --- There are a couple of things you can try: Check tablet driver is correctly installed, and configured properly for krita: check the quick solutions page for this https://docs.krita.org/en/contributors_manual/user_support.html#quick-solutions Another thing to try is to reset krita configuration (this is not deleted or modified between installs): https://docs.krita.org/en/KritaFAQ.html#resetting-krita-configuration aside from that could you give us more ino on your tablet model/driver? -- You are receiving this mail because: You are watching all bug changes.
[ark] [Bug 409975] Large memory usage when extracting multiple, large zip files
https://bugs.kde.org/show_bug.cgi?id=409975 --- Comment #3 from johnjohn...@gmail.com --- After further examination, I cannot reproduce it on another zip files on a similar Arch system. The file I had problems with is zip files with thousands of jpeg files. Since I cannot access that computer in the next few days, I cannot provide further exact information for now. Also, there was only one ark process; something like: ark file1.zip file2.zip file3.zip file4.zip ... (In reply to Kitsuna from comment #1) > Hey there Jon, I cant reproduce this using ARK 19.04.3. Could you please > provide the full information from the original template? This includes > > SOFTWARE/OS VERSIONS > Linux/KDE Plasma: > (available in About System) > KDE Plasma Version: > KDE Frameworks Version: > Qt Version: > > Have you been able to reproduce this with all archives or is only one giving > you issues? -- You are receiving this mail because: You are watching all bug changes.
[kdiff3] [Bug 410007] Kdiff3 freezes and takes all RAM when showing line diff for two files
https://bugs.kde.org/show_bug.cgi?id=410007 michael changed: What|Removed |Added Ever confirmed|0 |1 Status|REPORTED|CONFIRMED --- Comment #1 from michael --- This a known issue with master right now. Its undergoing a major rewrite and is not stable at this time. -- You are receiving this mail because: You are watching all bug changes.
[krita] [Bug 410034] Gradient labels are not translated (and two are not translatable)
https://bugs.kde.org/show_bug.cgi?id=410034 vanyossi changed: What|Removed |Added Latest Commit||https://invent.kde.org/kde/ ||krita/commit/76e2b76b160744 ||3f5e079aa6f8000199f98dcda3 Resolution|--- |FIXED Status|ASSIGNED|RESOLVED --- Comment #1 from vanyossi --- Git commit 76e2b76b1607443f5e079aa6f8000199f98dcda3 by Ivan Yossi. Committed on 22/07/2019 at 01:32. Pushed by ivany into branch 'master'. Make generated gradient's names translatable M +3-2libs/widgets/KoResourceServerProvider.cpp https://invent.kde.org/kde/krita/commit/76e2b76b1607443f5e079aa6f8000199f98dcda3 -- You are receiving this mail because: You are watching all bug changes.
[yakuake] [Bug 410089] New: Search toolbar loses focus after hiding/showing Yakuake
https://bugs.kde.org/show_bug.cgi?id=410089 Bug ID: 410089 Summary: Search toolbar loses focus after hiding/showing Yakuake Product: yakuake Version: 3.0.5 Platform: Fedora RPMs OS: Linux Status: REPORTED Severity: normal Priority: NOR Component: general Assignee: h...@kde.org Reporter: aspotas...@gmail.com Target Milestone: --- SUMMARY Search line loses focus after hiding/showing Yakuake. STEPS TO REPRODUCE 1. open Yakuake 2. start search in output log, type in some text in search toolbar 3. press F12 to hide yakuake 4. press F12 again to display yakuake OBSERVED RESULT Console is focused. EXPECTED RESULT Search toolbar should be focused. SOFTWARE/OS VERSIONS Operating System: Fedora 30 KDE Plasma Version: 5.15.5 KDE Frameworks Version: 5.59.0 Qt Version: 5.12.4 Kernel Version: 5.1.16-300.fc30.x86_64 OS Type: 64-bit Processors: 8 × Intel® Core™ i7-6700HQ CPU @ 2.60GHz Memory: 15,4 ГиБ ADDITIONAL INFORMATION -- You are receiving this mail because: You are watching all bug changes.
[yakuake] [Bug 392929] panel focus changes when hiding/showing yakuake
https://bugs.kde.org/show_bug.cgi?id=392929 Alexander Potashev changed: What|Removed |Added CC||aspotas...@gmail.com -- You are receiving this mail because: You are watching all bug changes.
[krita] [Bug 410034] Gradient labels are not translated (and two are not translatable)
https://bugs.kde.org/show_bug.cgi?id=410034 vanyossi changed: What|Removed |Added Ever confirmed|0 |1 CC||ghe...@gmail.com Assignee|krita-bugs-n...@kde.org |ghe...@gmail.com Status|REPORTED|ASSIGNED -- You are receiving this mail because: You are watching all bug changes.
[krita] [Bug 409941] The docker listing is not sorted alphabetically, this makes it hard to search
https://bugs.kde.org/show_bug.cgi?id=409941 vanyossi changed: What|Removed |Added Assignee|krita-bugs-n...@kde.org |ghe...@gmail.com Status|CONFIRMED |ASSIGNED --- Comment #3 from vanyossi --- Assigning to myself, if its indeed Qt generated I'll mark it as solved. -- You are receiving this mail because: You are watching all bug changes.
[krita] [Bug 407514] [templates] Custom template folders don't display their name
https://bugs.kde.org/show_bug.cgi?id=407514 vanyossi changed: What|Removed |Added Resolution|WAITINGFORINFO |NOT A BUG Status|NEEDSINFO |RESOLVED --- Comment #4 from vanyossi --- thanks deevad, I saw the messages but I was unsure if make something to workaround those faulty files or not. I will mark as resolved hoping as this is something of a rare case. -- You are receiving this mail because: You are watching all bug changes.
[gwenview] [Bug 410083] Gwenview Crashes on Wayland when opening Picture from overview
https://bugs.kde.org/show_bug.cgi?id=410083 Patrick Silva changed: What|Removed |Added CC||bugsefor...@gmx.com --- Comment #1 from Patrick Silva --- Is opengl rendering enabled in gwenview settings? I can reproduce the crash on my system when opengl rendering is enabled, and here is the backtrace: Application: Gwenview (gwenview), signal: Aborted Using host libthread_db library "/usr/lib/libthread_db.so.1". [Current thread is 1 (Thread 0x7f65c3bf2e80 (LWP 11863))] Thread 4 (Thread 0x7f65b2f3a700 (LWP 11866)): #0 0x7f65c84e577c in pthread_cond_timedwait@@GLIBC_2.3.2 () at /usr/lib/libpthread.so.0 #1 0x7f65c9e7c50c in QWaitConditionPrivate::wait_relative(QDeadlineTimer) (this=0x55e0cb8c6f10, deadline=...) at thread/qwaitcondition_unix.cpp:136 #2 0x7f65c9e7c50c in QWaitConditionPrivate::wait(QDeadlineTimer) (deadline=..., this=0x55e0cb8c6f10) at thread/qwaitcondition_unix.cpp:144 #3 0x7f65c9e7c50c in QWaitCondition::wait(QMutex*, QDeadlineTimer) (this=, mutex=0x55e0cb855db0, deadline=...) at thread/qwaitcondition_unix.cpp:225 #4 0x7f65c9e7c659 in QWaitCondition::wait(QMutex*, unsigned long) (this=this@entry=0x55e0cb8c6e00, mutex=mutex@entry=0x55e0cb855db0, time=) at thread/qwaitcondition_unix.cpp:209 #5 0x7f65c9e79b0b in QThreadPoolThread::run() (this=0x55e0cb8c6df0) at ../../include/QtCore/../../src/corelib/thread/qmutex.h:240 #6 0x7f65c9e76520 in QThreadPrivate::start(void*) (arg=0x55e0cb8c6df0) at thread/qthread_unix.cpp:360 #7 0x7f65c84df57f in start_thread () at /usr/lib/libpthread.so.0 #8 0x7f65c9b030e3 in clone () at /usr/lib/libc.so.6 Thread 3 (Thread 0x7f65ba00e700 (LWP 11865)): #0 0x7f65c84e5415 in pthread_cond_wait@@GLIBC_2.3.2 () at /usr/lib/libpthread.so.0 #1 0x7f65ba343ebc in () at /usr/lib/dri/i965_dri.so #2 0x7f65ba343ab8 in () at /usr/lib/dri/i965_dri.so #3 0x7f65c84df57f in start_thread () at /usr/lib/libpthread.so.0 #4 0x7f65c9b030e3 in clone () at /usr/lib/libc.so.6 Thread 2 (Thread 0x7f65c279f700 (LWP 11864)): #0 0x7f65c9af8667 in poll () at /usr/lib/libc.so.6 #1 0x7f65c5f88a80 in () at /usr/lib/libglib-2.0.so.0 #2 0x7f65c5f88b51 in g_main_context_iteration () at /usr/lib/libglib-2.0.so.0 #3 0x7f65ca09b9bc in QEventDispatcherGlib::processEvents(QFlags) (this=0x7f65bc000b20, flags=...) at kernel/qeventdispatcher_glib.cpp:425 #4 0x7f65ca0425ec in QEventLoop::exec(QFlags) (this=this@entry=0x7f65c279ecb0, flags=..., flags@entry=...) at ../../include/QtCore/../../src/corelib/global/qflags.h:140 #5 0x7f65c9e752f5 in QThread::exec() (this=this@entry=0x7f65c97c3080 <(anonymous namespace)::Q_QGS__q_manager::innerFunction()::holder>) at ../../include/QtCore/../../src/corelib/global/qflags.h:120 #6 0x7f65c973fb37 in QDBusConnectionManager::run() (this=0x7f65c97c3080 <(anonymous namespace)::Q_QGS__q_manager::innerFunction()::holder>) at qdbusconnection.cpp:178 #7 0x7f65c9e76520 in QThreadPrivate::start(void*) (arg=0x7f65c97c3080 <(anonymous namespace)::Q_QGS__q_manager::innerFunction()::holder>) at thread/qthread_unix.cpp:360 #8 0x7f65c84df57f in start_thread () at /usr/lib/libpthread.so.0 #9 0x7f65c9b030e3 in clone () at /usr/lib/libc.so.6 Thread 1 (Thread 0x7f65c3bf2e80 (LWP 11863)): [KCrash Handler] #6 0x7f65c9a41755 in raise () at /usr/lib/libc.so.6 #7 0x7f65c9a2c851 in abort () at /usr/lib/libc.so.6 #8 0x7f65cbc2cf80 in () at /usr/lib/libwayland-client.so.0 #9 0x7f65cbc28cc0 in wl_proxy_marshal_array_constructor_versioned () at /usr/lib/libwayland-client.so.0 #10 0x7f65cbc28efc in wl_proxy_marshal_constructor () at /usr/lib/libwayland-client.so.0 #11 0x7f65c37d7d08 in QtWaylandClient::QWaylandDisplay::createSubSurface(QtWaylandClient::QWaylandWindow*, QtWaylandClient::QWaylandWindow*) () at /usr/lib/libQt5WaylandClient.so.5 #12 0x7f65c37e45df in QtWaylandClient::QWaylandWindow::initWindow() () at /usr/lib/libQt5WaylandClient.so.5 #13 0x7f65c37e4c4f in QtWaylandClient::QWaylandWindow::setVisible(bool) () at /usr/lib/libQt5WaylandClient.so.5 #14 0x7f65bb112af5 in () at /usr/lib/qt/plugins/wayland-graphics-integration-client/libqt-plugin-wayland-egl.so #15 0x7f65ca60beec in QWindowPrivate::setVisible(bool) (this=0x55e0cb8cbd90, visible=visible@entry=true) at kernel/qwindow.cpp:402 #16 0x7f65cac7d8ae in QWidgetWindow::setNativeWindowVisibility(bool) (this=this@entry=0x55e0cb8cbd30, visible=visible@entry=true) at kernel/qwidgetwindow.cpp:205 #17 0x7f65cac5603a in QWidgetPrivate::show_sys() (this=this@entry=0x55e0cb815620) at kernel/qwidget.cpp:8158 #18 0x7f65cac5f501 in QWidgetPrivate::show_helper() (this=0x55e0cb815620) at kernel/qwidget.cpp:8081 #19 0x7f65cac5f325 in QWidgetPrivate::show_recursive() (this=) at kernel/qwidget.cpp:7950 #20 0x7f65cac
[plasmashell] [Bug 410073] Systemsettings headlines are not cleared when switching to other options/icons of settings
https://bugs.kde.org/show_bug.cgi?id=410073 Patrick Silva changed: What|Removed |Added CC||bugsefor...@gmx.com --- Comment #2 from Patrick Silva --- duplicate of bug 400876 -- You are receiving this mail because: You are watching all bug changes.
[kate] [Bug 410087] Kate preview plugin doesn't render Markdown with kmarkdownwebview plugin installed
https://bugs.kde.org/show_bug.cgi?id=410087 --- Comment #5 from Friedrich W. H. Kossebau --- (In reply to jman012345 from comment #4) > Just tried that, still no luck. Is there a way to get debug output from the > preview plugin? I see what looks like debug text in the source you linked > but if I launch Kate from a terminal window I don't get any debug output. You can control the debug level via the qt logging system. In this case the identifier to use is a (badly unnamespaced) "ktexteditorpreviewplugin". export QT_LOGGING_RULES="ktexteditorpreviewplugin.debug=true" should set the respective env var to change the level for that logging category. (more background at https://doc.qt.io/qt-5/qloggingcategory.html) -- You are receiving this mail because: You are watching all bug changes.
[kmymoney] [Bug 410075] Shows closed accounts despite option set to not show them
https://bugs.kde.org/show_bug.cgi?id=410075 Jack changed: What|Removed |Added CC|ostroffjh@users.sourceforge | |.net| -- You are receiving this mail because: You are watching all bug changes.
[kmymoney] [Bug 410075] Shows closed accounts despite option set to not show them
https://bugs.kde.org/show_bug.cgi?id=410075 Jack changed: What|Removed |Added CC||ostroffjh@users.sourceforge ||.net --- Comment #3 from Jack --- I believe we recently discussed this, but I don't remember if it was another bug filed, or just on the mailing list. I've made a note to be sure the manual is sufficiently clear about it - in both places that describe the two relevant settings. I may also add it to the FAQ. You are correct that it is not really intuitive how those two settings combine, and even more confusing if you have only discovered one of them so far. -- You are receiving this mail because: You are watching all bug changes.
[Spectacle] [Bug 409798] Spectacle Copy To Clipboard Doesn't Work Properly Under Wayland Session
https://bugs.kde.org/show_bug.cgi?id=409798 Nate Graham changed: What|Removed |Added Status|REPORTED|CONFIRMED Severity|normal |major Ever confirmed|0 |1 Priority|NOR |HI CC||n...@kde.org -- You are receiving this mail because: You are watching all bug changes.
[kwin] [Bug 409919] KDE application forgot their initial size after maximizing and closing them.
https://bugs.kde.org/show_bug.cgi?id=409919 Nate Graham changed: What|Removed |Added CC||n...@kde.org --- Comment #11 from Nate Graham --- > Well, as I said: restoring size (including maximized state) is task of the > applications. On X11, KWin currently takes care of maximizing windows that were maximized when they were closed (IIRC it compares the window size to the screen size and maximizes the window if they're equal). It should have the same behavior on Wayland. -- You are receiving this mail because: You are watching all bug changes.
[kate] [Bug 410087] Kate preview plugin doesn't render Markdown with kmarkdownwebview plugin installed
https://bugs.kde.org/show_bug.cgi?id=410087 --- Comment #4 from jman012...@gmail.com --- Just tried that, still no luck. Is there a way to get debug output from the preview plugin? I see what looks like debug text in the source you linked but if I launch Kate from a terminal window I don't get any debug output. -- You are receiving this mail because: You are watching all bug changes.
[kate] [Bug 410087] Kate preview plugin doesn't render Markdown with kmarkdownwebview plugin installed
https://bugs.kde.org/show_bug.cgi?id=410087 --- Comment #3 from Friedrich W. H. Kossebau --- Potentially in newer versions this could also be influenced by the Mode currently used (cmp. https://cgit.kde.org/kate.git/tree/addons/preview/previewwidget.cpp#n169 ) So test if changing the Tools>Mode to Markup > Markdown fixes things. Otherwise no idea, no longer a maintainer of that plugin (surprised to have been subscribed). -- You are receiving this mail because: You are watching all bug changes.
[okular] [Bug 409932] Allow to open a link using text search
https://bugs.kde.org/show_bug.cgi?id=409932 Nate Graham changed: What|Removed |Added Ever confirmed|0 |1 CC||n...@kde.org Status|REPORTED|CONFIRMED --- Comment #1 from Nate Graham --- Yeah, I use this in web browsers a lot and it would be nice to have it in Okular too. -- You are receiving this mail because: You are watching all bug changes.
[dolphin] [Bug 410009] Dolphin crash when I open a file in plasma-wayland.
https://bugs.kde.org/show_bug.cgi?id=410009 Nate Graham changed: What|Removed |Added CC||n...@kde.org -- You are receiving this mail because: You are watching all bug changes.
[dolphin] [Bug 410080] Dolphin crashed when I opened a file via "Open with"
https://bugs.kde.org/show_bug.cgi?id=410080 Nate Graham changed: What|Removed |Added Resolution|--- |DUPLICATE CC||n...@kde.org Status|REPORTED|RESOLVED --- Comment #1 from Nate Graham --- *** This bug has been marked as a duplicate of bug 410009 *** -- You are receiving this mail because: You are watching all bug changes.
[dolphin] [Bug 410009] Dolphin crash when I open a file in plasma-wayland.
https://bugs.kde.org/show_bug.cgi?id=410009 Nate Graham changed: What|Removed |Added CC||bugsefor...@gmx.com --- Comment #1 from Nate Graham --- *** Bug 410080 has been marked as a duplicate of this bug. *** -- You are receiving this mail because: You are watching all bug changes.
[dolphin] [Bug 410061] Dolphin fails to restore window state (on restart) to maximized when running on wayland
https://bugs.kde.org/show_bug.cgi?id=410061 Nate Graham changed: What|Removed |Added Status|REPORTED|NEEDSINFO Resolution|--- |WAITINGFORINFO CC||n...@kde.org --- Comment #7 from Nate Graham --- Is it only Dolphin that exhibits this behavior on Wayland? Or do you find that it happens for other KDE apps too (and if so, which ones)? -- You are receiving this mail because: You are watching all bug changes.
[dolphin] [Bug 410081] Dolphin crashes when copying files to phone (mtp=)
https://bugs.kde.org/show_bug.cgi?id=410081 Nate Graham changed: What|Removed |Added CC||n...@kde.org Resolution|--- |DUPLICATE Status|REPORTED|RESOLVED --- Comment #1 from Nate Graham --- *** This bug has been marked as a duplicate of bug 20 *** -- You are receiving this mail because: You are watching all bug changes.
[dolphin] [Bug 208888] dolphin crashed when drag n drop about 50 files from usb device to local disc. 2 dolphin windows open
https://bugs.kde.org/show_bug.cgi?id=20 Nate Graham changed: What|Removed |Added CC||aaugu...@uvigo.es --- Comment #6 from Nate Graham --- *** Bug 410081 has been marked as a duplicate of this bug. *** -- You are receiving this mail because: You are watching all bug changes.
[Discover] [Bug 410057] Installing and updating software, discovery said has not connection.
https://bugs.kde.org/show_bug.cgi?id=410057 Nate Graham changed: What|Removed |Added Status|REPORTED|NEEDSINFO CC||n...@kde.org Resolution|--- |WAITINGFORINFO --- Comment #2 from Nate Graham --- Your Plasma and version is rather old for Tumbleweed. We're on 5.16.3 now. As Kitsuna implies, it sounds like there's a problem with your repos. Can you upgrade using the command line and try again? -- You are receiving this mail because: You are watching all bug changes.
[kate] [Bug 410087] Kate preview plugin doesn't render Markdown with kmarkdownwebview plugin installed
https://bugs.kde.org/show_bug.cgi?id=410087 --- Comment #2 from jman012...@gmail.com --- I just tested and I'm unable to get the Okular plugin to work either. However, this is not the initial blank document that hasn't been saved (bug 384971) and I'm not attempting to change the MIME type of an existing document to Markdown (bug 384972). The workarounds for bug 384973 don't work for me either. -- You are receiving this mail because: You are watching all bug changes.
[kio-extras] [Bug 410074] Kio client error when mounting an external storage drive
https://bugs.kde.org/show_bug.cgi?id=410074 Nate Graham changed: What|Removed |Added CC||n...@kde.org Resolution|--- |WAITINGFORINFO Status|REPORTED|NEEDSINFO --- Comment #1 from Nate Graham --- What's the error? Also please attach a screenshot. -- You are receiving this mail because: You are watching all bug changes.
[kate] [Bug 410087] Kate preview plugin doesn't render Markdown with kmarkdownwebview plugin installed
https://bugs.kde.org/show_bug.cgi?id=410087 --- Comment #1 from Friedrich W. H. Kossebau --- Hi. Just to make sure, you are not running into bug 384971, bug 384972 or 384973? Does using the Okular plugin (which has a markdown import plugin and thus also can be used here) work instead? -- You are receiving this mail because: You are watching all bug changes.
[plasmashell] [Bug 410072] Font anti-aliasing activates 'exclude range from A.A' by itself
https://bugs.kde.org/show_bug.cgi?id=410072 Nate Graham changed: What|Removed |Added Status|REPORTED|RESOLVED Resolution|--- |DUPLICATE CC||n...@kde.org --- Comment #1 from Nate Graham --- *** This bug has been marked as a duplicate of bug 409518 *** -- You are receiving this mail because: You are watching all bug changes.
[plasmashell] [Bug 410073] Systemsettings headlines are not cleared when switching to other options/icons of settings
https://bugs.kde.org/show_bug.cgi?id=410073 Nate Graham changed: What|Removed |Added CC||n...@kde.org Resolution|--- |WAITINGFORINFO Status|REPORTED|NEEDSINFO --- Comment #1 from Nate Graham --- Just those two pages? Or others too? -- You are receiving this mail because: You are watching all bug changes.
[systemsettings] [Bug 409518] Visiting Fonts KCM changes antialliasing settings without warning
https://bugs.kde.org/show_bug.cgi?id=409518 Nate Graham changed: What|Removed |Added CC||slartibar...@gmail.com --- Comment #18 from Nate Graham --- *** Bug 410072 has been marked as a duplicate of this bug. *** -- You are receiving this mail because: You are watching all bug changes.
[plasmashell] [Bug 410088] New: [SDDM theme] When blur and controls disappear after 35 seconds, pressing certain keys wont give focus to the password field
https://bugs.kde.org/show_bug.cgi?id=410088 Bug ID: 410088 Summary: [SDDM theme] When blur and controls disappear after 35 seconds, pressing certain keys wont give focus to the password field Product: plasmashell Version: 5.16.3 Platform: Other OS: Linux Status: REPORTED Severity: normal Priority: NOR Component: Theme - Breeze Assignee: visual-des...@kde.org Reporter: neo...@protonmail.com CC: plasma-b...@kde.org Target Milestone: 1.0 Pressing some keys will remove the focus on the password field once 35-40 seconds have passed after a login out of a session or booting the system. System: Neon UE 5.16.3 KDE Framework 5.60.0 QT Version 5.12.3 Reproducible: Always Steps to Reproduce: 1. Power on the device/logout of a existing session (wait until the password field fades) 2. Press the Escape key or other keys like control, space bar. Keys that aren't actually letters or numbers. Actual Results: Pressing Esc for example will show the password field but it will be grayed out and there will be no blinking cursor in which to write the password. Until the tab key or the mouse is used to select the password field. Expected Results: Pressing Escape will let you see the password field and pressing it again will hide again. Any other key should give focus to the password field not move/remove the blinking cursor. -- You are receiving this mail because: You are watching all bug changes.
[kate] [Bug 410087] New: Kate preview plugin doesn't render Markdown with kmarkdownwebview plugin installed
https://bugs.kde.org/show_bug.cgi?id=410087 Bug ID: 410087 Summary: Kate preview plugin doesn't render Markdown with kmarkdownwebview plugin installed Product: kate Version: 19.04.2 Platform: Fedora RPMs OS: Linux Status: REPORTED Severity: normal Priority: NOR Component: plugin-preview Assignee: kwrite-bugs-n...@kde.org Reporter: jman012...@gmail.com CC: kosse...@kde.org Target Milestone: --- SUMMARY I'm unable to view a preview of any Markdown document using kmarkdownwebview. I've ensured that kmarkdownwebview is installed correctly and is functioning (thumbnails are generated in Dolphin when kmarkdownwebview is built with -DUSE_QTWEBKIT=TRUE). I was able to get a preview of one document immediately after building kmarkdownwebview, but after closing Kate and reopening it, I'm unable to get a preview. This problem persists if I remove and reinstall kmarkdownwebview. STEPS TO REPRODUCE 1. Clone kmarkdownwebview repository: git clone https://github.com/KDE/kmarkdownwebview.git 2. Enter the new directory: cd kmarkdownwebview 3. Get the latest stable version: git checkout tags/v0.5.5 4. Configure kmarkdownwebview: cmake -DKDE_INSTALL_USE_QT_SYS_PATHS=TRUE -DUSE_QTWEBKIT=TRUE . 5. Build: make 6. Install: sudo make install 7. Set kmarkdownwebview as embedded Markdown viewer: Plasma settings > Applications > File Associations > text/markdown > Embedding > move Markdown Web View (kmarkdownwebviewpart) to the top 8. Open an existing Markdown file in Kate with preview plugin enabled OBSERVED RESULT Preview panel stays blank except for a "No preview available" message EXPECTED RESULT Preview panel renders a web view version of the current Markdown document. SOFTWARE/OS VERSIONS Linux/KDE Plasma: Fedora 30 KDE Plasma Version: 5.15.5 KDE Frameworks Version: 5.59.0 Qt Version: 5.12.4 ADDITIONAL INFORMATION -- You are receiving this mail because: You are watching all bug changes.
[frameworks-kio] [Bug 410050] Add context menu item "Add to Places"
https://bugs.kde.org/show_bug.cgi?id=410050 Nate Graham changed: What|Removed |Added Status|REPORTED|CONFIRMED Keywords||usability Ever confirmed|0 |1 CC||n...@kde.org -- You are receiving this mail because: You are watching all bug changes.
[plasmashell] [Bug 410017] Non-existent folders in recent documents ask to choose application
https://bugs.kde.org/show_bug.cgi?id=410017 Nate Graham changed: What|Removed |Added CC||meve...@gmail.com, ||n...@kde.org -- You are receiving this mail because: You are watching all bug changes.
[systemsettings] [Bug 410014] Standalone Mouse kcm shrinks when unminimized
https://bugs.kde.org/show_bug.cgi?id=410014 Nate Graham changed: What|Removed |Added Ever confirmed|0 |1 CC||n...@kde.org Status|REPORTED|CONFIRMED --- Comment #1 from Nate Graham --- Bizarre! -- You are receiving this mail because: You are watching all bug changes.
[elisa] [Bug 410001] Can't add samba shared folders to Elisa library or even open samba shared audio files
https://bugs.kde.org/show_bug.cgi?id=410001 Nate Graham changed: What|Removed |Added Status|REPORTED|NEEDSINFO Resolution|--- |WAITINGFORINFO CC||n...@kde.org --- Comment #1 from Nate Graham --- How are you accessing the Samba shared folder? Locally mounting it? from the smb://server/share path? Some other method? -- You are receiving this mail because: You are watching all bug changes.
[kleopatra] [Bug 410086] New: Kleopatra fails to decrypt from clipboard
https://bugs.kde.org/show_bug.cgi?id=410086 Bug ID: 410086 Summary: Kleopatra fails to decrypt from clipboard Product: kleopatra Version: 3.0.1 Platform: Ubuntu Packages OS: Linux Status: REPORTED Severity: normal Priority: NOR Component: general Assignee: aheine...@gnupg.org Reporter: clchas...@aol.com CC: kdepim-b...@kde.org, m...@kde.org Target Milestone: --- Created attachment 121669 --> https://bugs.kde.org/attachment.cgi?id=121669&action=edit Its the gnu log for the failed process SUMMARY STEPS TO REPRODUCE 1. export key 2. use igolder.com to encrypt test message using public key exported in step 1 3. use clipboard to decrypt message copied from igolder.com encryption output OBSERVED RESULT failed to decrypt EXPECTED RESULT SOFTWARE/OS VERSIONS Windows: macOS: Linux/KDE Plasma: (available in About System) KDE Plasma Version: KDE Frameworks Version: Qt Version: ADDITIONAL INFORMATION -- You are receiving this mail because: You are watching all bug changes.
[krita] [Bug 409968] Text tool gives abort message pop up when trying to edit existing text
https://bugs.kde.org/show_bug.cgi?id=409968 Andrew changed: What|Removed |Added OS|Linux |MS Windows CC||andrew.mcgra...@gmail.com --- Comment #8 from Andrew --- The same thing happened to me yesterday. I was just using the perspective tool on a text box and after maybe 20 seconds I got the same error. -- You are receiving this mail because: You are watching all bug changes.
[digikam] [Bug 410085] Can't import from Google Photos
https://bugs.kde.org/show_bug.cgi?id=410085 Colin changed: What|Removed |Added CC||colinofl...@gmail.com -- You are receiving this mail because: You are watching all bug changes.
[digikam] [Bug 410085] New: Can't import from Google Photos
https://bugs.kde.org/show_bug.cgi?id=410085 Bug ID: 410085 Summary: Can't import from Google Photos Product: digikam Version: 6.1.0 Platform: Other OS: macOS Status: REPORTED Severity: normal Priority: NOR Component: Interroperability Assignee: digikam-bugs-n...@kde.org Reporter: colinofl...@gmail.com Target Milestone: --- SUMMARY STEPS TO REPRODUCE 1. Import 2. Select Google Photo and authenticate 3. Get error message OBSERVED RESULT Error transferring https://photoslibrary.googleapis.com/v1/mediaItems:search - server replied: Bad Request EXPECTED RESULT SOFTWARE/OS VERSIONS Windows: macOS: Linux/KDE Plasma: (available in About System) KDE Plasma Version: KDE Frameworks Version: Qt Version: ADDITIONAL INFORMATION -- You are receiving this mail because: You are watching all bug changes.
[systemsettings] [Bug 408709] system settings crashed on Wayland when I was switching between the sections of "Desktop behavior"
https://bugs.kde.org/show_bug.cgi?id=408709 --- Comment #2 from Patrick Silva --- exact steps to reproduce this crash: open system settings > desktop behavior click on "Activities" section switch to any other section... crash -- You are receiving this mail because: You are watching all bug changes.
[systemsettings] [Bug 408863] [Feature Request] Use wallpaper selector for SDDM background image
https://bugs.kde.org/show_bug.cgi?id=408863 Patrick Silva changed: What|Removed |Added CC||bugsefor...@gmx.com -- You are receiving this mail because: You are watching all bug changes.
[digikam] [Bug 409995] Scan for Faces in video files is not yet supported
https://bugs.kde.org/show_bug.cgi?id=409995 IWBR changed: What|Removed |Added CC||iwannaber...@gmail.com -- You are receiving this mail because: You are watching all bug changes.
[systemsettings] [Bug 404779] Tilled Fonts KCM is resized when "Apply" button is clicked
https://bugs.kde.org/show_bug.cgi?id=404779 Nate Graham changed: What|Removed |Added Resolution|WAITINGFORINFO |--- Status|NEEDSINFO |CONFIRMED --- Comment #4 from Nate Graham --- Ah, it depends on the size of your screen and the width of the KCM. Can still confirm now. -- You are receiving this mail because: You are watching all bug changes.
[systemsettings] [Bug 391569] While trying the Option of "systemsettings" to configure sddm, systemsettings always crashes !
https://bugs.kde.org/show_bug.cgi?id=391569 Nate Graham changed: What|Removed |Added CC||n...@kde.org Resolution|--- |FIXED Status|REPORTED|RESOLVED --- Comment #2 from Nate Graham --- Yep, this was since fixed. -- You are receiving this mail because: You are watching all bug changes.
[systemsettings] [Bug 404779] Tilled Fonts KCM is resized when "Apply" button is clicked
https://bugs.kde.org/show_bug.cgi?id=404779 --- Comment #3 from Patrick Silva --- Created attachment 121668 --> https://bugs.kde.org/attachment.cgi?id=121668&action=edit new screen recording yes, I can. Watch the new screen recording please. -- You are receiving this mail because: You are watching all bug changes.
[systemsettings] [Bug 371636] Allow to choose Background Images from Wallpapers / Gallery
https://bugs.kde.org/show_bug.cgi?id=371636 Nate Graham changed: What|Removed |Added Status|REPORTED|RESOLVED Resolution|--- |DUPLICATE CC||n...@kde.org --- Comment #1 from Nate Graham --- *** This bug has been marked as a duplicate of bug 408863 *** -- You are receiving this mail because: You are watching all bug changes.
[systemsettings] [Bug 408863] [Feature Request] Use wallpaper selector for SDDM background image
https://bugs.kde.org/show_bug.cgi?id=408863 Nate Graham changed: What|Removed |Added CC||emailm...@protonmail.com --- Comment #4 from Nate Graham --- *** Bug 381207 has been marked as a duplicate of this bug. *** -- You are receiving this mail because: You are watching all bug changes.
[systemsettings] [Bug 408863] [Feature Request] Use wallpaper selector for SDDM background image
https://bugs.kde.org/show_bug.cgi?id=408863 --- Comment #2 from Nate Graham --- And maybe you'd like to be able to use a solid color too. Any plugins that SDDM doesn't support could simply be blacklisted. Or instead, maybe only the Image and Solid Color plugins could be whitelisted with all others not appearing. -- You are receiving this mail because: You are watching all bug changes.
[systemsettings] [Bug 381207] Allow the use of a solid color as the background instead of a wallpaper
https://bugs.kde.org/show_bug.cgi?id=381207 Nate Graham changed: What|Removed |Added CC||n...@kde.org Resolution|--- |DUPLICATE Status|REPORTED|RESOLVED --- Comment #4 from Nate Graham --- *** This bug has been marked as a duplicate of bug 408863 *** -- You are receiving this mail because: You are watching all bug changes.
[systemsettings] [Bug 408863] [Feature Request] Use wallpaper selector for SDDM background image
https://bugs.kde.org/show_bug.cgi?id=408863 Nate Graham changed: What|Removed |Added CC||richard.l...@gmail.com --- Comment #3 from Nate Graham --- *** Bug 371636 has been marked as a duplicate of this bug. *** -- You are receiving this mail because: You are watching all bug changes.
