[Kernel-packages] [Bug 1727212] Re: ath10k bug leads to can't reboot or can't switch wifi APs
** Tags added: originate-from-1718628 somerville -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1727212 Title: ath10k bug leads to can't reboot or can't switch wifi APs Status in HWE Next: New Status in linux package in Ubuntu: In Progress Bug description: The ath10k bug leads to 2 issues 1. Can't switch wireless connection between several WiFi APs Steps: 1. Connect to a wifi ap 2. check wireless connection 3. connect to another wifi ap 4. check wireless connection Expected results: System should be able to switch different wireless connection between several wifi ap Actual results: Can't switch wireless connection between several WiFi APs 2. System can't reboot/power off Steps: 1. Connect to an WiFi ap 2. connect to another WiFi ap 3. try to reboot or power off system Expected results: System should always able to reboot/power off Actual results: System can't reboot/power off This issue could be fixed after v4.13.5 is merged into Ubuntu Artful kernel https://bugs.launchpad.net/ubuntu/artful/+source/linux-raspi2/+bug/1721777 To manage notifications about this bug go to: https://bugs.launchpad.net/hwe-next/+bug/1727212/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1594214] Re: ETPS/2 Elantech Touchpad inconsistently detected (Gigabyte P57W laptop)
Hooray! Thank *you*! If there's anything else you need from my end, don't hesitate to let me know! :) -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1594214 Title: ETPS/2 Elantech Touchpad inconsistently detected (Gigabyte P57W laptop) Status in linux package in Ubuntu: Fix Released Status in linux source package in Xenial: Fix Committed Status in linux source package in Zesty: Fix Committed Bug description: SRU Justification [Impact] Touchpad on Gigabyte P57W laptop does not gets detected reliably. [Test Case] Touchpad not does not gets detected reliably. With the patch, it can get detected reliably. [Regression Potential] Minimal. The change limits to a single specific laptop. --- On my Gigabyte P57W laptop the ETPS/2 Elantech touchpad is inconsistently detected at boot. Trying mainline 4.6 kernel did not help. WORKAROUND: Add kernel boot parameter: i8042.kbdreset=1 The device is id=17 on xinput below: $ xinput ⎡ Virtual core pointerid=2[master pointer (3)] ⎜ ↳ Virtual core XTEST pointer id=4[slave pointer (2)] ⎜ ↳ Kingsis Peripherals Evoluent VerticalMouse 3 id=12 [slave pointer (2)] ⎜ ↳ Sunrex/JME Ghost Key Elimiantion Keyboard id=14 [slave pointer (2)] ⎜ ↳ ETPS/2 Elantech Touchpadid=17 [slave pointer (2)] ⎣ Virtual core keyboard id=3[master keyboard (2)] ↳ Virtual core XTEST keyboard id=5[slave keyboard (3)] ↳ Power Buttonid=6[slave keyboard (3)] ↳ Video Bus id=7[slave keyboard (3)] ↳ Video Bus id=8[slave keyboard (3)] ↳ Sleep Buttonid=9[slave keyboard (3)] ↳ Power Buttonid=10 [slave keyboard (3)] ↳ Sleep Buttonid=11 [slave keyboard (3)] ↳ Sunrex/JME Ghost Key Elimiantion Keyboard id=13 [slave keyboard (3)] ↳ Chicony USB 2.0 Camera id=15 [slave keyboard (3)] ↳ AT Translated Set 2 keyboardid=16 [slave keyboard (3)] ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: linux-image-4.4.0-24-generic 4.4.0-24.43~14.04.1 ProcVersionSignature: Ubuntu 4.4.0-24.43~14.04.1-generic 4.4.10 Uname: Linux 4.4.0-24-generic x86_64 ApportVersion: 2.14.1-0ubuntu3.21 Architecture: amd64 Date: Mon Jun 20 10:56:33 2016 InstallationDate: Installed on 2014-05-20 (761 days ago) InstallationMedia: Ubuntu 14.04 LTS "Trusty Tahr" - Release amd64 (20140417) SourcePackage: linux-lts-xenial UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1594214/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1724562] Re: linux-lts-trusty: 3.13.0-135.184~precise1 -proposed tracker
** Changed in: kernel-sru-workflow/verification-testing Status: Confirmed => Fix Released -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-lts-trusty in Ubuntu. https://bugs.launchpad.net/bugs/1724562 Title: linux-lts-trusty: 3.13.0-135.184~precise1 -proposed tracker Status in Kernel SRU Workflow: In Progress Status in Kernel SRU Workflow automated-testing series: Confirmed Status in Kernel SRU Workflow certification-testing series: Invalid Status in Kernel SRU Workflow prepare-package series: Fix Released Status in Kernel SRU Workflow prepare-package-meta series: Fix Released Status in Kernel SRU Workflow prepare-package-signed series: Fix Released Status in Kernel SRU Workflow promote-to-proposed series: Fix Released Status in Kernel SRU Workflow promote-to-security series: New Status in Kernel SRU Workflow promote-to-updates series: New Status in Kernel SRU Workflow regression-testing series: Fix Released Status in Kernel SRU Workflow security-signoff series: Confirmed Status in Kernel SRU Workflow upload-to-ppa series: New Status in Kernel SRU Workflow verification-testing series: Fix Released Status in linux-lts-trusty package in Ubuntu: Invalid Status in linux-lts-trusty source package in Precise: Confirmed Bug description: This bug is for tracking the 3.13.0-135.184~precise1 upload package. This bug will contain status and testing results related to that upload. For an explanation of the tasks and the associated workflow see: https://wiki.ubuntu.com/Kernel/kernel-sru-workflow -- swm properties -- boot-testing-requested: true kernel-stable-master-bug: 1724500 phase: Promoted to proposed proposed-announcement-sent: true proposed-testing-requested: true To manage notifications about this bug go to: https://bugs.launchpad.net/kernel-sru-workflow/+bug/1724562/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1721455] Re: Support Dell Wireless DW5819/5818 WWAN devices
** Tags removed: verification-needed-xenial ** Tags added: verification-done-xenial ** Changed in: linux (Ubuntu) Status: In Progress => Fix Committed -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1721455 Title: Support Dell Wireless DW5819/5818 WWAN devices Status in linux package in Ubuntu: Fix Committed Status in linux source package in Xenial: Fix Committed Bug description: [Impact] Dell Wireless 5819/5818 devices are re-branded Sierra Wireless MC74 series which will by default boot with vid 0x413c and pid's 0x81cf, 0x81d0, 0x81d1,0x81d2. [Fix] This patch has already been submitted upstream, reviewed and applied by linux-usb serial maintainer. [PATCH] USB: serial: qcserial: add Dell DW5818, DW581 (See: https://marc.info/?l=linux-usb=150703788328773=2) However, to meet Dell Edge Gateway 300x delivery schedule, a sauce patch is being submitted to Xenial SRU. [Regression Potential] The patch adds USB VID's/PID's to the usb qcserial driver. Regression potential is minimal. [Testing] A test kernel (snap) with this patch was verified by the ODM, no issues were reported. This bug is used for tracking purposes, please do not triage. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1721455/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1713770] Re: USN-3405-1 kernel cause kernel panic when using mandos
[Expired for linux (Ubuntu) because there has been no activity for 60 days.] ** Changed in: linux (Ubuntu) Status: Incomplete => Expired -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1713770 Title: USN-3405-1 kernel cause kernel panic when using mandos Status in linux package in Ubuntu: Expired Status in linux source package in Xenial: Expired Bug description: When mandos is installed, kernel panics and doesn't get password from mandos server. Since it happens so early in the boot, the panic isn't in the logs. On machine that don't have mandos installed, kernel boots fine. The linux-image-4.4.0-92-generic kernel works fine. sorry, I had to say I didn't know which package is was in order to submit the bug report, it's linux-image-4.4.0-93-generic. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1713770/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1713770] Re: USN-3405-1 kernel cause kernel panic when using mandos
[Expired for linux (Ubuntu Xenial) because there has been no activity for 60 days.] ** Changed in: linux (Ubuntu Xenial) Status: Incomplete => Expired -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1713770 Title: USN-3405-1 kernel cause kernel panic when using mandos Status in linux package in Ubuntu: Expired Status in linux source package in Xenial: Expired Bug description: When mandos is installed, kernel panics and doesn't get password from mandos server. Since it happens so early in the boot, the panic isn't in the logs. On machine that don't have mandos installed, kernel boots fine. The linux-image-4.4.0-92-generic kernel works fine. sorry, I had to say I didn't know which package is was in order to submit the bug report, it's linux-image-4.4.0-93-generic. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1713770/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1594214] Re: ETPS/2 Elantech Touchpad inconsistently detected (Gigabyte P57W laptop)
As per comment #28 and #29 ** Tags removed: verification-needed-xenial verification-needed-zesty ** Tags added: verification-done-xenial verification-done-zesty -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1594214 Title: ETPS/2 Elantech Touchpad inconsistently detected (Gigabyte P57W laptop) Status in linux package in Ubuntu: Fix Released Status in linux source package in Xenial: Fix Committed Status in linux source package in Zesty: Fix Committed Bug description: SRU Justification [Impact] Touchpad on Gigabyte P57W laptop does not gets detected reliably. [Test Case] Touchpad not does not gets detected reliably. With the patch, it can get detected reliably. [Regression Potential] Minimal. The change limits to a single specific laptop. --- On my Gigabyte P57W laptop the ETPS/2 Elantech touchpad is inconsistently detected at boot. Trying mainline 4.6 kernel did not help. WORKAROUND: Add kernel boot parameter: i8042.kbdreset=1 The device is id=17 on xinput below: $ xinput ⎡ Virtual core pointerid=2[master pointer (3)] ⎜ ↳ Virtual core XTEST pointer id=4[slave pointer (2)] ⎜ ↳ Kingsis Peripherals Evoluent VerticalMouse 3 id=12 [slave pointer (2)] ⎜ ↳ Sunrex/JME Ghost Key Elimiantion Keyboard id=14 [slave pointer (2)] ⎜ ↳ ETPS/2 Elantech Touchpadid=17 [slave pointer (2)] ⎣ Virtual core keyboard id=3[master keyboard (2)] ↳ Virtual core XTEST keyboard id=5[slave keyboard (3)] ↳ Power Buttonid=6[slave keyboard (3)] ↳ Video Bus id=7[slave keyboard (3)] ↳ Video Bus id=8[slave keyboard (3)] ↳ Sleep Buttonid=9[slave keyboard (3)] ↳ Power Buttonid=10 [slave keyboard (3)] ↳ Sleep Buttonid=11 [slave keyboard (3)] ↳ Sunrex/JME Ghost Key Elimiantion Keyboard id=13 [slave keyboard (3)] ↳ Chicony USB 2.0 Camera id=15 [slave keyboard (3)] ↳ AT Translated Set 2 keyboardid=16 [slave keyboard (3)] ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: linux-image-4.4.0-24-generic 4.4.0-24.43~14.04.1 ProcVersionSignature: Ubuntu 4.4.0-24.43~14.04.1-generic 4.4.10 Uname: Linux 4.4.0-24-generic x86_64 ApportVersion: 2.14.1-0ubuntu3.21 Architecture: amd64 Date: Mon Jun 20 10:56:33 2016 InstallationDate: Installed on 2014-05-20 (761 days ago) InstallationMedia: Ubuntu 14.04 LTS "Trusty Tahr" - Release amd64 (20140417) SourcePackage: linux-lts-xenial UpgradeStatus: No upgrade log present (probably fresh install) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1594214/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1728489] [NEW] tar -x sometimes fails on overlayfs
Public bug reported: [SRU Justification] [Impact] A user is seeing failures from extracting tar archives on overlay filesystems on the 4.4 kernel in constrained environments. The error presents as: `tar: ./deps/0/bin: Directory renamed before its status could be extracted` Following this thread (http://www.spinics.net/lists/linux- unionfs/msg00856.html), it appears that this occurs when entries in the kernel's inode cache are reclaimed, and subsequent lookups return new inode numbers. Further testing showed that when setting `/proc/sys/vm/vfs_cache_pressure` to 0 (don't allow the kernel to reclaim inode cache entries due to memory pressure) the error does not recur, supporting the hypothesis that cache entries are being evicted. However, this setting may lead to a kernel OOM so is not a reasonable workaround even temporarily. The error cannot be reproduced on a 4.13 kernel, due to the series at https://www.spinics.net/lists/linux-fsdevel/msg110235.html. The particular relevant commit is b7a807dc2010334e62e0afd89d6f7a8913eb14ff, which needs a couple of dependencies. [Fix] For Zesty, backport the entire series. For Xenial, where a full backport is not feasible, backport the key commit and the short list of dependencies. [Testcase] # Testing this bug The testcase for this particular bug is simple - create an overlay filesystem with all layers on the same underlying file system, and then see if the inode of a directory is constant across dropping the caches: mkdir -p /upper/upper /upper/work /lower mount -t overlay none /mnt -o lowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work cd /mnt mkdir a stat a # observe inode number echo 2 > /proc/sys/vm/drop_caches stat a # compare inode number If the inode number is the same, the fix is successful. # Regression testing I have run the unionmount test suite from http://git.infradead.org/users/dhowells/unionmount-testsuite.git in overlay mode (./run --ov), and verified that it still passes. (The series cover letter mentions a fork of the test suite at https://github.com/amir73il/unionmount-testsuite/commits/overlayfs- devel. I have *not* attempted to get this running: it assumes a range of changes that are not present in our kernels.) [Regression Potential] As this changes overlayfs, there is potential for regression in the form of unexpected breakages to overlaysfs behaviour. I think this is adequately addressed by the regression testing. One option to reduce the regression potential on Zesty is to reduce the set of patches applied - rather than including the whole series we could include just the patches to solve this bug, which are much easier to inspect for correctness. ** Affects: linux (Ubuntu) Importance: Undecided Assignee: Daniel Axtens (daxtens) Status: Confirmed -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1728489 Title: tar -x sometimes fails on overlayfs Status in linux package in Ubuntu: Confirmed Bug description: [SRU Justification] [Impact] A user is seeing failures from extracting tar archives on overlay filesystems on the 4.4 kernel in constrained environments. The error presents as: `tar: ./deps/0/bin: Directory renamed before its status could be extracted` Following this thread (http://www.spinics.net/lists/linux- unionfs/msg00856.html), it appears that this occurs when entries in the kernel's inode cache are reclaimed, and subsequent lookups return new inode numbers. Further testing showed that when setting `/proc/sys/vm/vfs_cache_pressure` to 0 (don't allow the kernel to reclaim inode cache entries due to memory pressure) the error does not recur, supporting the hypothesis that cache entries are being evicted. However, this setting may lead to a kernel OOM so is not a reasonable workaround even temporarily. The error cannot be reproduced on a 4.13 kernel, due to the series at https://www.spinics.net/lists/linux-fsdevel/msg110235.html. The particular relevant commit is b7a807dc2010334e62e0afd89d6f7a8913eb14ff, which needs a couple of dependencies. [Fix] For Zesty, backport the entire series. For Xenial, where a full backport is not feasible, backport the key commit and the short list of dependencies. [Testcase] # Testing this bug The testcase for this particular bug is simple - create an overlay filesystem with all layers on the same underlying file system, and then see if the inode of a directory is constant across dropping the caches: mkdir -p /upper/upper /upper/work /lower mount -t overlay none /mnt -o lowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work cd /mnt mkdir a stat a # observe inode number echo 2 > /proc/sys/vm/drop_caches stat a # compare inode number If the inode number is the same, the fix is successful. # Regression testing I have run the unionmount test suite from
[Kernel-packages] [Bug 1724500] Re: linux: 3.13.0-135.184 -proposed tracker
All bugs tagged with verification-needed have been verified. ** Changed in: kernel-sru-workflow/verification-testing Status: Confirmed => Fix Released ** Changed in: kernel-sru-workflow/verification-testing Assignee: Canonical Kernel Team (canonical-kernel-team) => Po-Hsu Lin (cypressyew) -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1724500 Title: linux: 3.13.0-135.184 -proposed tracker Status in Kernel SRU Workflow: In Progress Status in Kernel SRU Workflow automated-testing series: Fix Released Status in Kernel SRU Workflow certification-testing series: Fix Released Status in Kernel SRU Workflow prepare-package series: Fix Released Status in Kernel SRU Workflow prepare-package-meta series: Fix Released Status in Kernel SRU Workflow prepare-package-signed series: Fix Released Status in Kernel SRU Workflow promote-to-proposed series: Fix Released Status in Kernel SRU Workflow promote-to-security series: New Status in Kernel SRU Workflow promote-to-updates series: New Status in Kernel SRU Workflow regression-testing series: Fix Released Status in Kernel SRU Workflow security-signoff series: Confirmed Status in Kernel SRU Workflow upload-to-ppa series: Invalid Status in Kernel SRU Workflow verification-testing series: Fix Released Status in linux package in Ubuntu: Invalid Status in linux source package in Trusty: Confirmed Bug description: This bug is for tracking the 3.13.0-135.184 upload package. This bug will contain status and testing results related to that upload. For an explanation of the tasks and the associated workflow see: https://wiki.ubuntu.com/Kernel/kernel-sru-workflow backports: 1724562 derivatives: -- swm properties -- boot-testing-requested: true phase: Promoted to proposed proposed-announcement-sent: true proposed-testing-requested: true To manage notifications about this bug go to: https://bugs.launchpad.net/kernel-sru-workflow/+bug/1724500/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1728313] Status changed to Confirmed
This change was made by a bot. ** Changed in: linux (Ubuntu) Status: New => Confirmed -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1728313 Title: Intel Coffee Lake GPU isn't supported by default (yet) Status in linux package in Ubuntu: Confirmed Bug description: I've got a CPU with integrated GPU, it's the intel i5-8400; I've also installed an old asus [Radeon HD 6670/7670] GPU. OS: ubuntu 17.10 The first problem is that the integrated GPU doesn't work unless you edit grub enabling the i915 driver support. I had to modify GRUB to load the intel driver: GRUB_CMDLINE_LINUX_DEFAULT="quiet splash i915.alpha_support=1" This GPU works perfectly with wayland (gnome and ubuntu session): Turks XT [Radeon HD 6670/7670] But when I enable the integrated GPU (by disabling the Radeon pci GPU from the bios), I can't use wayland, which disappears from the login screen. My question is why the integrated intel GPU doesn't work with wayland: I can only use X. If I switch from gdm3 to lightdm, I can see the wayland gnome and ubuntu sessions in the list of the available sessions, but I can't login. To be precise, using lightdm I can't login at all. When logging, there are some errors, for example: [OK] Starting session manager for UID 121 Stopping session manager for UID 121 ProblemType: Bug DistroRelease: Ubuntu 17.10 Package: weston (not installed) ProcVersionSignature: Ubuntu 4.13.0-16.19-generic 4.13.4 Uname: Linux 4.13.0-16-generic x86_64 ApportVersion: 2.20.7-0ubuntu3.1 Architecture: amd64 CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins' CompositorRunning: None CurrentDesktop: GNOME Date: Sun Oct 29 00:22:36 2017 DistUpgraded: Fresh install DistroCodename: artful DistroVariant: ubuntu GraphicsCard: Intel Corporation Device [8086:3e92] (prog-if 00 [VGA controller]) Subsystem: ASUSTeK Computer Inc. Device [1043:8694] Advanced Micro Devices, Inc. [AMD/ATI] Turks XT [Radeon HD 6670/7670] [1002:6758] (prog-if 00 [VGA controller]) Subsystem: ASUSTeK Computer Inc. Turks XT [Radeon HD 6670/7670] [1043:03f2] InstallationDate: Installed on 2017-10-25 (3 days ago) InstallationMedia: Ubuntu 17.10 "Artful Aardvark" - Release amd64 (20171018) MachineType: System manufacturer System Product Name ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.13.0-16-generic root=UUID=8946514c-0547-4d93-8cf6-bad6b91fa7dc ro quiet splash i915.alpha_support=1 vt.handoff=7 Renderer: Software SourcePackage: weston UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 10/18/2017 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 0419 dmi.board.asset.tag: Default string dmi.board.name: PRIME Z370-A dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: Rev X.0x dmi.chassis.asset.tag: Default string dmi.chassis.type: 3 dmi.chassis.vendor: Default string dmi.chassis.version: Default string dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr0419:bd10/18/2017:svnSystemmanufacturer:pnSystemProductName:pvrSystemVersion:rvnASUSTeKCOMPUTERINC.:rnPRIMEZ370-A:rvrRevX.0x:cvnDefaultstring:ct3:cvrDefaultstring: dmi.product.family: To be filled by O.E.M. dmi.product.name: System Product Name dmi.product.version: System Version dmi.sys.vendor: System manufacturer version.compiz: compiz N/A version.libdrm2: libdrm2 2.4.83-1 version.libgl1-mesa-dri: libgl1-mesa-dri 17.2.2-0ubuntu1 version.libgl1-mesa-glx: libgl1-mesa-glx 17.2.2-0ubuntu1 version.xserver-xorg-core: xserver-xorg-core 2:1.19.5-0ubuntu2 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev N/A version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.10.0-1 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.917+git20170309-0ubuntu1 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.15-2 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1728313/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1728313] Re: integrated intel GPU doesn't work with wayland on ubuntu 17.10
Thanks, that's a nicely detailed bug report. The first issue you identified is just that your Intel GPU is too new for Linux kernel 4.13 so you need to set alpha_support=1. This will be fixed in Linux kernel 4.15 (coming in Ubuntu 18.04). The second issue you describe is bug 1724732. So let's keep this bug just about the first issue. ** Summary changed: - integrated intel GPU doesn't work with wayland on ubuntu 17.10 + Intel Coffee Lake GPU isn't supported by default (yet) ** Package changed: weston (Ubuntu) => linux (Ubuntu) ** No longer affects: wayland (Ubuntu) -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1728313 Title: Intel Coffee Lake GPU isn't supported by default (yet) Status in linux package in Ubuntu: New Bug description: I've got a CPU with integrated GPU, it's the intel i5-8400; I've also installed an old asus [Radeon HD 6670/7670] GPU. OS: ubuntu 17.10 The first problem is that the integrated GPU doesn't work unless you edit grub enabling the i915 driver support. I had to modify GRUB to load the intel driver: GRUB_CMDLINE_LINUX_DEFAULT="quiet splash i915.alpha_support=1" This GPU works perfectly with wayland (gnome and ubuntu session): Turks XT [Radeon HD 6670/7670] But when I enable the integrated GPU (by disabling the Radeon pci GPU from the bios), I can't use wayland, which disappears from the login screen. My question is why the integrated intel GPU doesn't work with wayland: I can only use X. If I switch from gdm3 to lightdm, I can see the wayland gnome and ubuntu sessions in the list of the available sessions, but I can't login. To be precise, using lightdm I can't login at all. When logging, there are some errors, for example: [OK] Starting session manager for UID 121 Stopping session manager for UID 121 ProblemType: Bug DistroRelease: Ubuntu 17.10 Package: weston (not installed) ProcVersionSignature: Ubuntu 4.13.0-16.19-generic 4.13.4 Uname: Linux 4.13.0-16-generic x86_64 ApportVersion: 2.20.7-0ubuntu3.1 Architecture: amd64 CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins' CompositorRunning: None CurrentDesktop: GNOME Date: Sun Oct 29 00:22:36 2017 DistUpgraded: Fresh install DistroCodename: artful DistroVariant: ubuntu GraphicsCard: Intel Corporation Device [8086:3e92] (prog-if 00 [VGA controller]) Subsystem: ASUSTeK Computer Inc. Device [1043:8694] Advanced Micro Devices, Inc. [AMD/ATI] Turks XT [Radeon HD 6670/7670] [1002:6758] (prog-if 00 [VGA controller]) Subsystem: ASUSTeK Computer Inc. Turks XT [Radeon HD 6670/7670] [1043:03f2] InstallationDate: Installed on 2017-10-25 (3 days ago) InstallationMedia: Ubuntu 17.10 "Artful Aardvark" - Release amd64 (20171018) MachineType: System manufacturer System Product Name ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.13.0-16-generic root=UUID=8946514c-0547-4d93-8cf6-bad6b91fa7dc ro quiet splash i915.alpha_support=1 vt.handoff=7 Renderer: Software SourcePackage: weston UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 10/18/2017 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 0419 dmi.board.asset.tag: Default string dmi.board.name: PRIME Z370-A dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: Rev X.0x dmi.chassis.asset.tag: Default string dmi.chassis.type: 3 dmi.chassis.vendor: Default string dmi.chassis.version: Default string dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr0419:bd10/18/2017:svnSystemmanufacturer:pnSystemProductName:pvrSystemVersion:rvnASUSTeKCOMPUTERINC.:rnPRIMEZ370-A:rvrRevX.0x:cvnDefaultstring:ct3:cvrDefaultstring: dmi.product.family: To be filled by O.E.M. dmi.product.name: System Product Name dmi.product.version: System Version dmi.sys.vendor: System manufacturer version.compiz: compiz N/A version.libdrm2: libdrm2 2.4.83-1 version.libgl1-mesa-dri: libgl1-mesa-dri 17.2.2-0ubuntu1 version.libgl1-mesa-glx: libgl1-mesa-glx 17.2.2-0ubuntu1 version.xserver-xorg-core: xserver-xorg-core 2:1.19.5-0ubuntu2 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev N/A version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.10.0-1 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.917+git20170309-0ubuntu1 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.15-2 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1728313/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1728313] [NEW] Intel Coffee Lake GPU isn't supported by default (yet)
You have been subscribed to a public bug: I've got a CPU with integrated GPU, it's the intel i5-8400; I've also installed an old asus [Radeon HD 6670/7670] GPU. OS: ubuntu 17.10 The first problem is that the integrated GPU doesn't work unless you edit grub enabling the i915 driver support. I had to modify GRUB to load the intel driver: GRUB_CMDLINE_LINUX_DEFAULT="quiet splash i915.alpha_support=1" This GPU works perfectly with wayland (gnome and ubuntu session): Turks XT [Radeon HD 6670/7670] But when I enable the integrated GPU (by disabling the Radeon pci GPU from the bios), I can't use wayland, which disappears from the login screen. My question is why the integrated intel GPU doesn't work with wayland: I can only use X. If I switch from gdm3 to lightdm, I can see the wayland gnome and ubuntu sessions in the list of the available sessions, but I can't login. To be precise, using lightdm I can't login at all. When logging, there are some errors, for example: [OK] Starting session manager for UID 121 Stopping session manager for UID 121 ProblemType: Bug DistroRelease: Ubuntu 17.10 Package: weston (not installed) ProcVersionSignature: Ubuntu 4.13.0-16.19-generic 4.13.4 Uname: Linux 4.13.0-16-generic x86_64 ApportVersion: 2.20.7-0ubuntu3.1 Architecture: amd64 CompizPlugins: No value set for `/apps/compiz-1/general/screen0/options/active_plugins' CompositorRunning: None CurrentDesktop: GNOME Date: Sun Oct 29 00:22:36 2017 DistUpgraded: Fresh install DistroCodename: artful DistroVariant: ubuntu GraphicsCard: Intel Corporation Device [8086:3e92] (prog-if 00 [VGA controller]) Subsystem: ASUSTeK Computer Inc. Device [1043:8694] Advanced Micro Devices, Inc. [AMD/ATI] Turks XT [Radeon HD 6670/7670] [1002:6758] (prog-if 00 [VGA controller]) Subsystem: ASUSTeK Computer Inc. Turks XT [Radeon HD 6670/7670] [1043:03f2] InstallationDate: Installed on 2017-10-25 (3 days ago) InstallationMedia: Ubuntu 17.10 "Artful Aardvark" - Release amd64 (20171018) MachineType: System manufacturer System Product Name ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.13.0-16-generic root=UUID=8946514c-0547-4d93-8cf6-bad6b91fa7dc ro quiet splash i915.alpha_support=1 vt.handoff=7 Renderer: Software SourcePackage: weston UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 10/18/2017 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 0419 dmi.board.asset.tag: Default string dmi.board.name: PRIME Z370-A dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: Rev X.0x dmi.chassis.asset.tag: Default string dmi.chassis.type: 3 dmi.chassis.vendor: Default string dmi.chassis.version: Default string dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr0419:bd10/18/2017:svnSystemmanufacturer:pnSystemProductName:pvrSystemVersion:rvnASUSTeKCOMPUTERINC.:rnPRIMEZ370-A:rvrRevX.0x:cvnDefaultstring:ct3:cvrDefaultstring: dmi.product.family: To be filled by O.E.M. dmi.product.name: System Product Name dmi.product.version: System Version dmi.sys.vendor: System manufacturer version.compiz: compiz N/A version.libdrm2: libdrm2 2.4.83-1 version.libgl1-mesa-dri: libgl1-mesa-dri 17.2.2-0ubuntu1 version.libgl1-mesa-glx: libgl1-mesa-glx 17.2.2-0ubuntu1 version.xserver-xorg-core: xserver-xorg-core 2:1.19.5-0ubuntu2 version.xserver-xorg-input-evdev: xserver-xorg-input-evdev N/A version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:7.10.0-1 version.xserver-xorg-video-intel: xserver-xorg-video-intel 2:2.99.917+git20170309-0ubuntu1 version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.15-2 ** Affects: wayland (Ubuntu) Importance: Undecided Status: New ** Affects: linux (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug artful ubuntu -- Intel Coffee Lake GPU isn't supported by default (yet) https://bugs.launchpad.net/bugs/1728313 You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1724911] Re: text VTs are unavailable on desktop after upgrade to Ubuntu 17.10
9f15a4ab19ab33658dbc9fd37be5210e8c1ac622 is good. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1724911 Title: text VTs are unavailable on desktop after upgrade to Ubuntu 17.10 Status in linux package in Ubuntu: In Progress Status in linux source package in Artful: In Progress Bug description: After upgrading my laptop to Ubuntu 17.10, I am unable to access gettys on any of the text-mode VTs on my system. gdm3 is running on VT1, my user session is running on VT2. I can switch between these. If I switch to VT3, I know that the VT switch has happened in the kernel because the X cursor disappears; but the display retains the output of my X session, and the text console with getty never appears. Switching back to VT2 works fine. The same problem occurs with either Wayland or X. My laptop is docked with an external monitor, which could be a factor. (I also notice that during boot, plymouth is only rendered on the internal monitor, not the external monitor; this may be related). I have not yet tested whether this problem is reproducible if I undock. The system is booting with vt.handoff=7, which I believe is still the default in Ubuntu 17.10. ProblemType: Bug DistroRelease: Ubuntu 17.10 Package: linux-image-4.13.0-16-generic 4.13.0-16.19 ProcVersionSignature: Ubuntu 4.13.0-16.19-generic 4.13.4 Uname: Linux 4.13.0-16-generic x86_64 NonfreeKernelModules: zfs zunicode zavl zcommon znvpair ApportVersion: 2.20.7-0ubuntu3 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: vorlon24080 F pulseaudio /dev/snd/controlC0: vorlon24080 F pulseaudio CurrentDesktop: ubuntu:GNOME Date: Thu Oct 19 09:57:59 2017 HibernationDevice: RESUME=UUID=6df76279-19ea-45a4-bec9-e4fdc858729a InstallationDate: Installed on 2010-09-24 (2582 days ago) InstallationMedia: Ubuntu 10.04.1 LTS "Lucid Lynx" - Release amd64 (20100816.1) MachineType: LENOVO 2306CTO ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-4.13.0-16-generic.efi.signed root=/dev/mapper/hostname-root ro quiet splash vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-4.13.0-16-generic N/A linux-backports-modules-4.13.0-16-generic N/A linux-firmware 1.169 RfKill: 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no SourcePackage: linux UpgradeStatus: Upgraded to artful on 2017-10-19 (0 days ago) dmi.bios.date: 10/25/2013 dmi.bios.vendor: LENOVO dmi.bios.version: G2ET97WW (2.57 ) dmi.board.asset.tag: Not Available dmi.board.name: 2306CTO dmi.board.vendor: LENOVO dmi.board.version: Not Defined dmi.chassis.asset.tag: No Asset Information dmi.chassis.type: 10 dmi.chassis.vendor: LENOVO dmi.chassis.version: Not Available dmi.modalias: dmi:bvnLENOVO:bvrG2ET97WW(2.57):bd10/25/2013:svnLENOVO:pn2306CTO:pvrThinkPadX230:rvnLENOVO:rn2306CTO:rvrNotDefined:cvnLENOVO:ct10:cvrNotAvailable: dmi.product.family: ThinkPad X230 dmi.product.name: 2306CTO dmi.product.version: ThinkPad X230 dmi.sys.vendor: LENOVO To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1724911/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1617619] Re: Problem with Bluetooth USB Host Controller: Connection time-out after connecting to device
I have same problem with my ElementaryOS 0.4.1 based on Ubuntu 16.04. Kernel - 4.4.0-97-generic #120-Ubuntu SMP Tue Sep 19 17:28:18 UTC 2017 CPU - i5-3210M I upgaded bluetoothctl from 5.37 to 5.46, but problem still exists. $ dmesg | grep -i blue [3.113911] usb 1-1.2: Product: Bluetooth USB Host Controller [5.291238] Bluetooth: Core ver 2.21 [5.292778] Bluetooth: HCI device and connection manager initialized [5.292783] Bluetooth: HCI socket layer initialized [5.292786] Bluetooth: L2CAP socket layer initialized [5.292793] Bluetooth: SCO socket layer initialized [5.379880] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [5.379883] Bluetooth: BNEP filters: protocol multicast [5.379887] Bluetooth: BNEP socket layer initialized [7.407838] Bluetooth: hci0 command 0x0c13 tx timeout [9.411812] Bluetooth: hci0 command 0x0c52 tx timeout [ 11.796839] Bluetooth: RFCOMM TTY layer initialized [ 11.796846] Bluetooth: RFCOMM socket layer initialized [ 11.796851] Bluetooth: RFCOMM ver 1.11 $ lspci -knn | grep Net -A2; lsusb 02:00.0 Network controller [0280]: Qualcomm Atheros AR9485 Wireless Network Adapter [168c:0032] (rev 01) Subsystem: Samsung Electronics Co Ltd AR9485 Wireless Network Adapter [144d:4105] Kernel driver in use: ath9k Kernel modules: ath9k, wl Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 005: ID 2232:1029 Silicon Motion WebCam SC-13HDL11939N Bus 001 Device 004: ID 0cf3:3004 Atheros Communications, Inc. AR3012 Bluetooth 4.0 Bus 001 Device 003: ID 0bda:0129 Realtek Semiconductor Corp. RTS5129 Card Reader Controller Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 003 Device 002: ID 0458:6001 KYE Systems Corp. (Mouse Systems) GF3000F Ethernet Adapter Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub $ dmesg | grep ath3k; dkms status [5.295230] usbcore: registered new interface driver ath3k bcmwl, 6.30.223.271+bdcom, 4.4.0-96-generic, x86_64: installed bcmwl, 6.30.223.271+bdcom, 4.4.0-97-generic, x86_64: installed $ dmesg | grep ath9k; dkms status bcmwl, 6.30.223.271+bdcom, 4.4.0-96-generic, x86_64: installed bcmwl, 6.30.223.271+bdcom, 4.4.0-97-generic, x86_64: installed -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1617619 Title: Problem with Bluetooth USB Host Controller: Connection time-out after connecting to device Status in linux package in Ubuntu: Confirmed Bug description: 1.) Release: Ubuntu 16.04 LTS Kernel: Ubuntu 4.4.0-34.53-generic 4.4.15 CPU: Intel® Core™ i5-2450M CPU @ 2.50GHz × 4 Graphics: Gallium 0.4 on NVC1 OS type: 64-bit 2.)package-version (gnome-bluetooth): 3.18.2-1ubuntu2 3.) I expected a smooth connection of the computer to my speakers via bluetooth. 4.)... but after a short connection it sometimes gets a timeout. I faced this problem several times now, but not after every boot. I always tried to log-out and log-in again, as well as restarting the computer. Sometimes it helped, but this time it didn't work. I tried to fix it like in this report: http://askubuntu.com/questions/804014/stuck-on-a-bluetooth-problem they suggested it may be a kernel problem, therefore I thought it might be a good idea to report this, as it could be a bug. Here are some outputs: tingatinga@Xel:~$ dmesg | grep -i blue [2.461258] usb 1-1.5: Product: Bluetooth USB Host Controller [8.686487] Bluetooth: Core ver 2.21 [8.686504] Bluetooth: HCI device and connection manager initialized [8.686509] Bluetooth: HCI socket layer initialized [8.686512] Bluetooth: L2CAP socket layer initialized [8.686518] Bluetooth: SCO socket layer initialized [ 10.878528] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 10.878533] Bluetooth: BNEP filters: protocol multicast [ 10.878539] Bluetooth: BNEP socket layer initialized [ 24.914041] usb 1-1.5: Product: Bluetooth USB Host Controller [ 25.036498] Bluetooth: RFCOMM TTY layer initialized [ 25.036506] Bluetooth: RFCOMM socket layer initialized [ 25.036512] Bluetooth: RFCOMM ver 1.11 [ 1180.258184] usb 1-1.5: Product: Bluetooth USB Host Controller [ 1182.331574] Bluetooth: hci0 command 0x0c16 tx timeout [ 1184.335420] Bluetooth: hci0 command 0x2002 tx timeout [ 1186.339358] Bluetooth: hci0 command 0x2003 tx timeout [ 1188.343276] Bluetooth: hci0 command 0x201c tx timeout [ 1814.065219] usb 1-1.5: Product: Bluetooth USB Host Controller [ 1833.224835] usb 1-1.5: Product: Bluetooth USB Host Controller [ 1835.345966] Bluetooth: hci0 command 0x0c13 tx timeout [ 1837.353923] Bluetooth: hci0 command
[Kernel-packages] [Bug 1720580] Re: RTL8723bs bug: ERROR sd_recv_rxfifo: alloc recvbuf FAIL!
Interesting. I get complete freezes when wifi is enabled and these errors appear.With wifi disables, and modules not loaded, it works ok. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1720580 Title: RTL8723bs bug: ERROR sd_recv_rxfifo: alloc recvbuf FAIL! Status in linux package in Ubuntu: Confirmed Bug description: Found a bunch of "RTL8723BS: ERROR sd_recv_rxfifo: alloc recvbuf FAIL!" messages in syslog after a complete freeze. Searching for this error only found one reference https://lkml.org/lkml/2017/6/12/504. ProblemType: Bug DistroRelease: Ubuntu 17.10 Package: linux-image-4.13.0-12-generic 4.13.0-12.13 [modified: boot/vmlinuz-4.13.0-12-generic] ProcVersionSignature: Ubuntu 4.13.0-12.13-generic 4.13.3 Uname: Linux 4.13.0-12-generic x86_64 ApportVersion: 2.20.7-0ubuntu1 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: mele 1303 F pulseaudio CurrentDesktop: MATE Date: Sat Sep 30 23:45:09 2017 HibernationDevice: RESUME=UUID=ab188fcc-c7b5-433e-8dc8-bf403e9888ec InstallationDate: Installed on 2017-09-29 (1 days ago) InstallationMedia: Ubuntu-MATE 17.10 "Artful Aardvark" - Alpha amd64 (20170926) MachineType: MiPi PC Mini PC ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.13.0-12-generic.efi.signed root=UUID=f415201e-4ac6-4443-83b8-f40d3dc03403 ro quiet splash vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-4.13.0-12-generic N/A linux-backports-modules-4.13.0-12-generic N/A linux-firmware 1.168 RfKill: 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no SourcePackage: linux StagingDrivers: r8723bs UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 10/29/2015 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 5.6.5 dmi.board.asset.tag: To be filled by O.E.M. dmi.board.name: Mini PC dmi.board.vendor: Mini PC dmi.board.version: To be filled by O.E.M. dmi.chassis.asset.tag: To Be Filled By O.E.M. dmi.chassis.type: 8 dmi.chassis.vendor: Mini PC dmi.chassis.version: To Be Filled By O.E.M. dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr5.6.5:bd10/29/2015:svnMiPiPC:pnMiniPC:pvr2.80:rvnMiniPC:rnMiniPC:rvrTobefilledbyO.E.M.:cvnMiniPC:ct8:cvrToBeFilledByO.E.M.: dmi.product.family: To be filled by O.E.M. dmi.product.name: Mini PC dmi.product.version: 2.80 dmi.sys.vendor: MiPi PC To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1720580/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1716747] Re: linux 4.12 - high system load and mouse delays - pipe A vblank wait timed out
It seems that the PCI Express card was the culprit. When I removed my PCI Express USB 3.0 card everything worked fine. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1716747 Title: linux 4.12 - high system load and mouse delays - pipe A vblank wait timed out Status in linux package in Ubuntu: In Progress Status in linux source package in Artful: In Progress Bug description: This issue has been observed on a Lenovo X220i laptop: 1. Booting the laptop with artful's 4.12 kernel results in a very sluggish system performance (mouse pointer delays) and a high system load. 2. /var/log/kern.log indicates a problem with the display driver (see below) 3. The system works without any issues if the zesty kernel (4.10) is used instead. Ubuntu release: Artful Aardvark (development branch) Kernel package version: 4.12.0.13.14 Sep 12 20:22:45 trinity kernel: [ 155.491074] pipe A vblank wait timed out Sep 12 20:22:45 trinity kernel: [ 155.491117] [ cut here ] Sep 12 20:22:45 trinity kernel: [ 155.491171] WARNING: CPU: 0 PID: 203 at /build/linux-cK2WUa/linux-4.12.0/drivers/gpu/drm/i915/intel_display.c:12636 intel_atomic_commit_tail+0x1010/0x1020 [i915] Sep 12 20:22:45 trinity kernel: [ 155.491172] Modules linked in: nf_conntrack_netlink nfnetlink xfrm_user xfrm_algo xt_addrtype br_netfilter aufs xt_CHECKSUM iptable_mangle ipt_MASQUERADE nf_nat_masquerade_ipv4 iptable_nat nf_nat_ipv4 nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack ipt_REJECT nf_reject_ipv4 xt_tcpudp bridge stp llc ebtable_filter ebtables ip6table_filter ip6_tables iptable_filter binfmt_misc snd_hda_codec_hdmi snd_hda_codec_conexant snd_hda_codec_generic snd_hda_intel intel_rapl x86_pkg_temp_thermal intel_powerclamp coretemp snd_hda_codec snd_hda_core snd_hwdep snd_pcm kvm_intel snd_seq_midi kvm snd_seq_midi_event irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel cryptd intel_cstate snd_rawmidi intel_rapl_perf arc4 uvcvideo videobuf2_vmalloc iwldvm videobuf2_memops videobuf2_v4l2 mac80211 Sep 12 20:22:45 trinity kernel: [ 155.491215] videobuf2_core videodev joydev input_leds media iwlwifi serio_raw cfg80211 snd_seq snd_seq_device snd_timer thinkpad_acpi nvram snd mac_hid mei_me mei soundcore lpc_ich shpchp parport_pc ppdev lp parport ip_tables x_tables autofs4 xfs libcrc32c mmc_block i915 sdhci_pci uas usb_storage sdhci i2c_algo_bit drm_kms_helper psmouse syscopyarea ahci sysfillrect libahci sysimgblt e1000e fb_sys_fops drm ptp pps_core wmi video Sep 12 20:22:45 trinity kernel: [ 155.491251] CPU: 0 PID: 203 Comm: kworker/u16:5 Not tainted 4.12.0-13-generic #14-Ubuntu Sep 12 20:22:45 trinity kernel: [ 155.491253] Hardware name: LENOVO 4290W1A/4290W1A, BIOS 8DET69WW (1.39 ) 07/18/2013 Sep 12 20:22:45 trinity kernel: [ 155.491292] Workqueue: events_unbound intel_atomic_commit_work [i915] Sep 12 20:22:45 trinity kernel: [ 155.491295] task: 8842c14a8000 task.stack: ae8f0217c000 Sep 12 20:22:45 trinity kernel: [ 155.491330] RIP: 0010:intel_atomic_commit_tail+0x1010/0x1020 [i915] Sep 12 20:22:45 trinity kernel: [ 155.491331] RSP: 0018:ae8f0217fd88 EFLAGS: 00010282 Sep 12 20:22:45 trinity kernel: [ 155.491333] RAX: 001c RBX: RCX: Sep 12 20:22:45 trinity kernel: [ 155.491334] RDX: RSI: 8842de20dcc8 RDI: 8842de20dcc8 Sep 12 20:22:45 trinity kernel: [ 155.491336] RBP: ae8f0217fe40 R08: 0001 R09: 039a Sep 12 20:22:45 trinity kernel: [ 155.491337] R10: ae8f0217fd88 R11: R12: 2359 Sep 12 20:22:45 trinity kernel: [ 155.491338] R13: 8842c150 R14: 8842c15e6000 R15: 0001 Sep 12 20:22:45 trinity kernel: [ 155.491340] FS: () GS:8842de20() knlGS: Sep 12 20:22:45 trinity kernel: [ 155.491342] CS: 0010 DS: ES: CR0: 80050033 Sep 12 20:22:45 trinity kernel: [ 155.491343] CR2: 00c420921000 CR3: 0003a0409000 CR4: 000406f0 Sep 12 20:22:45 trinity kernel: [ 155.491345] Call Trace: Sep 12 20:22:45 trinity kernel: [ 155.491352] ? wake_bit_function+0x60/0x60 Sep 12 20:22:45 trinity kernel: [ 155.491386] intel_atomic_commit_work+0x12/0x20 [i915] Sep 12 20:22:45 trinity kernel: [ 155.491390] process_one_work+0x1e7/0x410 Sep 12 20:22:45 trinity kernel: [ 155.491393] worker_thread+0x4a/0x410 Sep 12 20:22:45 trinity kernel: [ 155.491396] kthread+0x125/0x140 Sep 12 20:22:45 trinity kernel: [ 155.491398] ? process_one_work+0x410/0x410 Sep 12 20:22:45 trinity kernel: [ 155.491400] ? kthread_create_on_node+0x70/0x70 Sep 12 20:22:45 trinity kernel: [ 155.491403] ret_from_fork+0x25/0x30 Sep 12 20:22:45 trinity kernel: [ 155.491405]
[Kernel-packages] [Bug 1724911] Re: text VTs are unavailable on desktop after upgrade to Ubuntu 17.10
b9c55b6e2cc4369b0688961fa5de0e057f3ec0c4 is good. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1724911 Title: text VTs are unavailable on desktop after upgrade to Ubuntu 17.10 Status in linux package in Ubuntu: In Progress Status in linux source package in Artful: In Progress Bug description: After upgrading my laptop to Ubuntu 17.10, I am unable to access gettys on any of the text-mode VTs on my system. gdm3 is running on VT1, my user session is running on VT2. I can switch between these. If I switch to VT3, I know that the VT switch has happened in the kernel because the X cursor disappears; but the display retains the output of my X session, and the text console with getty never appears. Switching back to VT2 works fine. The same problem occurs with either Wayland or X. My laptop is docked with an external monitor, which could be a factor. (I also notice that during boot, plymouth is only rendered on the internal monitor, not the external monitor; this may be related). I have not yet tested whether this problem is reproducible if I undock. The system is booting with vt.handoff=7, which I believe is still the default in Ubuntu 17.10. ProblemType: Bug DistroRelease: Ubuntu 17.10 Package: linux-image-4.13.0-16-generic 4.13.0-16.19 ProcVersionSignature: Ubuntu 4.13.0-16.19-generic 4.13.4 Uname: Linux 4.13.0-16-generic x86_64 NonfreeKernelModules: zfs zunicode zavl zcommon znvpair ApportVersion: 2.20.7-0ubuntu3 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: vorlon24080 F pulseaudio /dev/snd/controlC0: vorlon24080 F pulseaudio CurrentDesktop: ubuntu:GNOME Date: Thu Oct 19 09:57:59 2017 HibernationDevice: RESUME=UUID=6df76279-19ea-45a4-bec9-e4fdc858729a InstallationDate: Installed on 2010-09-24 (2582 days ago) InstallationMedia: Ubuntu 10.04.1 LTS "Lucid Lynx" - Release amd64 (20100816.1) MachineType: LENOVO 2306CTO ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-4.13.0-16-generic.efi.signed root=/dev/mapper/hostname-root ro quiet splash vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-4.13.0-16-generic N/A linux-backports-modules-4.13.0-16-generic N/A linux-firmware 1.169 RfKill: 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no SourcePackage: linux UpgradeStatus: Upgraded to artful on 2017-10-19 (0 days ago) dmi.bios.date: 10/25/2013 dmi.bios.vendor: LENOVO dmi.bios.version: G2ET97WW (2.57 ) dmi.board.asset.tag: Not Available dmi.board.name: 2306CTO dmi.board.vendor: LENOVO dmi.board.version: Not Defined dmi.chassis.asset.tag: No Asset Information dmi.chassis.type: 10 dmi.chassis.vendor: LENOVO dmi.chassis.version: Not Available dmi.modalias: dmi:bvnLENOVO:bvrG2ET97WW(2.57):bd10/25/2013:svnLENOVO:pn2306CTO:pvrThinkPadX230:rvnLENOVO:rn2306CTO:rvrNotDefined:cvnLENOVO:ct10:cvrNotAvailable: dmi.product.family: ThinkPad X230 dmi.product.name: 2306CTO dmi.product.version: ThinkPad X230 dmi.sys.vendor: LENOVO To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1724911/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1728453] Status changed to Confirmed
This change was made by a bot. ** Changed in: linux (Ubuntu) Status: New => Confirmed -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1728453 Title: kernel BUG at /build/linux- XO_uEE/linux-4.13.0/fs/btrfs/backref.c:1006! Status in linux package in Ubuntu: Confirmed Bug description: Was running duperemove for 240 gigabyte multiboot-ssd backup-image(two older images already, as well as 6 images from a 60gigabyte Windows system) on 2TB usb-hd. System was very low of free memory due Chrome browser. This duperemove seemed to take ages, ran over 24 hours already before this: kernel BUG at /build/linux-XO_uEE/linux-4.13.0/fs/btrfs/backref.c:1006! Kernel is pre-built, from linux-image-lowlatency -package ProblemType: KernelOops DistroRelease: Ubuntu 17.10 Package: linux-image-4.13.0-16-lowlatency 4.13.0-16.19 ProcVersionSignature: Ubuntu 4.13.0-16.19-lowlatency 4.13.4 Uname: Linux 4.13.0-16-lowlatency x86_64 Annotation: Your system might become unstable now and might need to be restarted. ApportVersion: 2.20.7-0ubuntu3 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: gdm1051 F pulseaudio jarkko 1475 F pulseaudio Date: Sun Oct 29 21:51:24 2017 Failure: oops InstallationDate: Installed on 2017-09-08 (51 days ago) InstallationMedia: Ubuntu 17.10 "Artful Aardvark" - Alpha amd64 (20170906) MachineType: Micro-Star International Co., Ltd. GE620/FX620DX ProcFB: 0 nouveaufb 1 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.13.0-16-lowlatency root=UUID=45b85877-dbec-4ab5-b557-31f8766def37 ro quiet splash vt.handoff=7 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: kerneloops-daemon N/A RfKill: 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no SourcePackage: linux Title: [439134.491535] [ cut here ] UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 04/14/2011 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: E16G5IMS V1.0D dmi.board.asset.tag: To be filled by O.E.M. dmi.board.name: MS-16G5 dmi.board.vendor: Micro-Star International Co., Ltd. dmi.board.version: To be filled by O.E.M. dmi.chassis.asset.tag: To Be Filled By O.E.M. dmi.chassis.type: 10 dmi.chassis.vendor: Micro-Star International Co., Ltd. dmi.chassis.version: To be filled by O.E.M. dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrE16G5IMSV1.0D:bd04/14/2011:svnMicro-StarInternationalCo.,Ltd.:pnGE620/FX620DX:pvrTobefilledbyO.E.M.:rvnMicro-StarInternationalCo.,Ltd.:rnMS-16G5:rvrTobefilledbyO.E.M.:cvnMicro-StarInternationalCo.,Ltd.:ct10:cvrTobefilledbyO.E.M.: dmi.product.family: To be filled by O.E.M. dmi.product.name: GE620/FX620DX dmi.product.version: To be filled by O.E.M. dmi.sys.vendor: Micro-Star International Co., Ltd. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1728453/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1728453] [NEW] kernel BUG at /build/linux-XO_uEE/linux-4.13.0/fs/btrfs/backref.c:1006!
Public bug reported: Was running duperemove for 240 gigabyte multiboot-ssd backup-image(two older images already, as well as 6 images from a 60gigabyte Windows system) on 2TB usb-hd. System was very low of free memory due Chrome browser. This duperemove seemed to take ages, ran over 24 hours already before this: kernel BUG at /build/linux-XO_uEE/linux-4.13.0/fs/btrfs/backref.c:1006! Kernel is pre-built, from linux-image-lowlatency -package ProblemType: KernelOops DistroRelease: Ubuntu 17.10 Package: linux-image-4.13.0-16-lowlatency 4.13.0-16.19 ProcVersionSignature: Ubuntu 4.13.0-16.19-lowlatency 4.13.4 Uname: Linux 4.13.0-16-lowlatency x86_64 Annotation: Your system might become unstable now and might need to be restarted. ApportVersion: 2.20.7-0ubuntu3 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: gdm1051 F pulseaudio jarkko 1475 F pulseaudio Date: Sun Oct 29 21:51:24 2017 Failure: oops InstallationDate: Installed on 2017-09-08 (51 days ago) InstallationMedia: Ubuntu 17.10 "Artful Aardvark" - Alpha amd64 (20170906) MachineType: Micro-Star International Co., Ltd. GE620/FX620DX ProcFB: 0 nouveaufb 1 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.13.0-16-lowlatency root=UUID=45b85877-dbec-4ab5-b557-31f8766def37 ro quiet splash vt.handoff=7 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: kerneloops-daemon N/A RfKill: 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no SourcePackage: linux Title: [439134.491535] [ cut here ] UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 04/14/2011 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: E16G5IMS V1.0D dmi.board.asset.tag: To be filled by O.E.M. dmi.board.name: MS-16G5 dmi.board.vendor: Micro-Star International Co., Ltd. dmi.board.version: To be filled by O.E.M. dmi.chassis.asset.tag: To Be Filled By O.E.M. dmi.chassis.type: 10 dmi.chassis.vendor: Micro-Star International Co., Ltd. dmi.chassis.version: To be filled by O.E.M. dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrE16G5IMSV1.0D:bd04/14/2011:svnMicro-StarInternationalCo.,Ltd.:pnGE620/FX620DX:pvrTobefilledbyO.E.M.:rvnMicro-StarInternationalCo.,Ltd.:rnMS-16G5:rvrTobefilledbyO.E.M.:cvnMicro-StarInternationalCo.,Ltd.:ct10:cvrTobefilledbyO.E.M.: dmi.product.family: To be filled by O.E.M. dmi.product.name: GE620/FX620DX dmi.product.version: To be filled by O.E.M. dmi.sys.vendor: Micro-Star International Co., Ltd. ** Affects: linux (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-kerneloops artful kernel-driver-btrfs kernel-oops -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1728453 Title: kernel BUG at /build/linux- XO_uEE/linux-4.13.0/fs/btrfs/backref.c:1006! Status in linux package in Ubuntu: New Bug description: Was running duperemove for 240 gigabyte multiboot-ssd backup-image(two older images already, as well as 6 images from a 60gigabyte Windows system) on 2TB usb-hd. System was very low of free memory due Chrome browser. This duperemove seemed to take ages, ran over 24 hours already before this: kernel BUG at /build/linux-XO_uEE/linux-4.13.0/fs/btrfs/backref.c:1006! Kernel is pre-built, from linux-image-lowlatency -package ProblemType: KernelOops DistroRelease: Ubuntu 17.10 Package: linux-image-4.13.0-16-lowlatency 4.13.0-16.19 ProcVersionSignature: Ubuntu 4.13.0-16.19-lowlatency 4.13.4 Uname: Linux 4.13.0-16-lowlatency x86_64 Annotation: Your system might become unstable now and might need to be restarted. ApportVersion: 2.20.7-0ubuntu3 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: gdm1051 F pulseaudio jarkko 1475 F pulseaudio Date: Sun Oct 29 21:51:24 2017 Failure: oops InstallationDate: Installed on 2017-09-08 (51 days ago) InstallationMedia: Ubuntu 17.10 "Artful Aardvark" - Alpha amd64 (20170906) MachineType: Micro-Star International Co., Ltd. GE620/FX620DX ProcFB: 0 nouveaufb 1 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.13.0-16-lowlatency root=UUID=45b85877-dbec-4ab5-b557-31f8766def37 ro quiet splash vt.handoff=7 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: kerneloops-daemon N/A RfKill: 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no SourcePackage: linux Title: [439134.491535] [ cut here ] UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 04/14/2011 dmi.bios.vendor: American Megatrends
[Kernel-packages] [Bug 1242310] Re: Bluetooth disabled after resume
OR using EOL release, and no response for years. ** No longer affects: linux (Ubuntu) ** Package changed: fedora => linux (Ubuntu) ** Changed in: linux (Ubuntu) Status: Fix Released => New ** Changed in: linux (Ubuntu) Remote watch: Red Hat Bugzilla #988481 => None ** Changed in: linux (Ubuntu) Status: New => Invalid -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1242310 Title: Bluetooth disabled after resume Status in linux package in Ubuntu: Invalid Bug description: On Ubuntu 13.10 a Lenovo X1 Carbon running Ubuntu 64-bit has problems to communicate with bluetooth input devices on resume from suspend. This problem happened only after upgrade to Ubuntu 13.10. Reloading the module btusb fixes the problem (rmmod btusb; modprobe btusb). Placing the module name btusb in the MODULES parameter on /etc/default/acpi-support does not fix the problem. I had to create a script in /etc/pm/sleep.d/ to make the module reload successfully. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1242310/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1176577] Re: [HP Compaq dc7700 Small Form Factor PC] mei unexpected reset in kernel 3.8
** No longer affects: linux (Ubuntu) ** Package changed: linux (Fedora) => linux (Ubuntu) ** Changed in: linux (Ubuntu) Importance: Low => Undecided ** Changed in: linux (Ubuntu) Status: Fix Released => New ** Changed in: linux (Ubuntu) Remote watch: Red Hat Bugzilla #917081 => None ** No longer affects: linux (Ubuntu) -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1176577 Title: [HP Compaq dc7700 Small Form Factor PC] mei unexpected reset in kernel 3.8 Status in linux package in Ubuntu: Incomplete Bug description: Right after upgrading kernel from 3.5 to 3.8 (Ubuntu 13.04), the syslog got flooded by a large number of such messages: (cut) May 5 15:33:15 compaq-aldo kernel: [ 205.064042] mei :00:03.0: unexpected reset: dev_state = RESETING May 5 15:33:21 compaq-aldo kernel: [ 211.076029] mei :00:03.0: unexpected reset: dev_state = RESETING May 5 15:33:27 compaq-aldo kernel: [ 217.088035] mei :00:03.0: unexpected reset: dev_state = RESETING May 5 15:33:33 compaq-aldo kernel: [ 223.100039] mei :00:03.0: unexpected reset: dev_state = RESETING May 5 15:33:39 compaq-aldo kernel: [ 229.112045] mei :00:03.0: unexpected reset: dev_state = RESETING (cut) This was associated by non reliable ethernet functionality, i.e. transfer of large files from my Ubuntu box to a local NAS connected via ethernet got hanging with no other apparent errors or diagnostics: nautilus copy just stopped transferring data, leaving the copy window there with the progress bar stopped. I tried to reboot, but this behaviour is perfectly reproducible. This is one of the first syslog lines got from that kernel: May 5 15:30:15 compaq-aldo kernel: [0.00] Linux version 3.8.0-19-generic (buildd@roseapple) (gcc version 4.7.3 (Ubuntu/Linaro 4.7.3-1ubuntu1) ) #30-Ubuntu SMP Wed May 1 16:36:13 UTC 2013 (Ubuntu 3.8.0-19.30-generic 3.8.8) I attach the whole syslog from boot of that kernel. On the same box, launching a previsous kernel (3.5) works flawlessly. For the time being, I removed 3.8 kernel from my box, now running 3.5. Kind regards Aldo --- ApportVersion: 2.9.2-0ubuntu8 Architecture: i386 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: ldx2074 F pulseaudio /dev/snd/controlC0: ldx2074 F pulseaudio CRDA: Error: command ['iw', 'reg', 'get'] failed with exit code 1: nl80211 not found. DistroRelease: Ubuntu 13.04 HibernationDevice: RESUME=UUID=32cc5d6d-43c1-4e97-a8b7-10b71aac3e29 InstallationDate: Installed on 2013-01-04 (121 days ago) InstallationMedia: Ubuntu 12.10 "Quantal Quetzal" - Release i386 (20121017.2) IwConfig: lono wireless extensions. eth0 no wireless extensions. MachineType: Hewlett-Packard HP Compaq dc7700 Small Form Factor MarkForUpload: True Package: linux (not installed) ProcEnviron: TERM=xterm PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=it_IT.UTF-8 SHELL=/bin/bash ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.8.0-19-generic root=UUID=38ce1d51-c3cf-438d-b395-f7c4744e2e37 ro quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 3.8.0-19.30-generic 3.8.8 RelatedPackageVersions: linux-restricted-modules-3.8.0-19-generic N/A linux-backports-modules-3.8.0-19-generic N/A linux-firmware1.106 RfKill: Tags: raring Uname: Linux 3.8.0-19-generic i686 UpgradeStatus: Upgraded to raring on 2013-04-26 (9 days ago) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo wireshark dmi.bios.date: 04/13/2007 dmi.bios.vendor: Hewlett-Packard dmi.bios.version: 786E1 v01.10 dmi.board.name: 0A54h dmi.board.vendor: Hewlett-Packard dmi.chassis.asset.tag: CZC7451V4Q dmi.chassis.type: 4 dmi.chassis.vendor: Hewlett-Packard dmi.modalias: dmi:bvnHewlett-Packard:bvr786E1v01.10:bd04/13/2007:svnHewlett-Packard:pnHPCompaqdc7700SmallFormFactor:pvr:rvnHewlett-Packard:rn0A54h:rvr:cvnHewlett-Packard:ct4:cvr: dmi.product.name: HP Compaq dc7700 Small Form Factor dmi.sys.vendor: Hewlett-Packard To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1176577/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1176577] Re: [HP Compaq dc7700 Small Form Factor PC] mei unexpected reset in kernel 3.8
Status changed to 'Confirmed' because the bug affects multiple users. ** Changed in: linux (Ubuntu) Status: New => Confirmed -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1176577 Title: [HP Compaq dc7700 Small Form Factor PC] mei unexpected reset in kernel 3.8 Status in linux package in Ubuntu: Incomplete Bug description: Right after upgrading kernel from 3.5 to 3.8 (Ubuntu 13.04), the syslog got flooded by a large number of such messages: (cut) May 5 15:33:15 compaq-aldo kernel: [ 205.064042] mei :00:03.0: unexpected reset: dev_state = RESETING May 5 15:33:21 compaq-aldo kernel: [ 211.076029] mei :00:03.0: unexpected reset: dev_state = RESETING May 5 15:33:27 compaq-aldo kernel: [ 217.088035] mei :00:03.0: unexpected reset: dev_state = RESETING May 5 15:33:33 compaq-aldo kernel: [ 223.100039] mei :00:03.0: unexpected reset: dev_state = RESETING May 5 15:33:39 compaq-aldo kernel: [ 229.112045] mei :00:03.0: unexpected reset: dev_state = RESETING (cut) This was associated by non reliable ethernet functionality, i.e. transfer of large files from my Ubuntu box to a local NAS connected via ethernet got hanging with no other apparent errors or diagnostics: nautilus copy just stopped transferring data, leaving the copy window there with the progress bar stopped. I tried to reboot, but this behaviour is perfectly reproducible. This is one of the first syslog lines got from that kernel: May 5 15:30:15 compaq-aldo kernel: [0.00] Linux version 3.8.0-19-generic (buildd@roseapple) (gcc version 4.7.3 (Ubuntu/Linaro 4.7.3-1ubuntu1) ) #30-Ubuntu SMP Wed May 1 16:36:13 UTC 2013 (Ubuntu 3.8.0-19.30-generic 3.8.8) I attach the whole syslog from boot of that kernel. On the same box, launching a previsous kernel (3.5) works flawlessly. For the time being, I removed 3.8 kernel from my box, now running 3.5. Kind regards Aldo --- ApportVersion: 2.9.2-0ubuntu8 Architecture: i386 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: ldx2074 F pulseaudio /dev/snd/controlC0: ldx2074 F pulseaudio CRDA: Error: command ['iw', 'reg', 'get'] failed with exit code 1: nl80211 not found. DistroRelease: Ubuntu 13.04 HibernationDevice: RESUME=UUID=32cc5d6d-43c1-4e97-a8b7-10b71aac3e29 InstallationDate: Installed on 2013-01-04 (121 days ago) InstallationMedia: Ubuntu 12.10 "Quantal Quetzal" - Release i386 (20121017.2) IwConfig: lono wireless extensions. eth0 no wireless extensions. MachineType: Hewlett-Packard HP Compaq dc7700 Small Form Factor MarkForUpload: True Package: linux (not installed) ProcEnviron: TERM=xterm PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=it_IT.UTF-8 SHELL=/bin/bash ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.8.0-19-generic root=UUID=38ce1d51-c3cf-438d-b395-f7c4744e2e37 ro quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 3.8.0-19.30-generic 3.8.8 RelatedPackageVersions: linux-restricted-modules-3.8.0-19-generic N/A linux-backports-modules-3.8.0-19-generic N/A linux-firmware1.106 RfKill: Tags: raring Uname: Linux 3.8.0-19-generic i686 UpgradeStatus: Upgraded to raring on 2013-04-26 (9 days ago) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo wireshark dmi.bios.date: 04/13/2007 dmi.bios.vendor: Hewlett-Packard dmi.bios.version: 786E1 v01.10 dmi.board.name: 0A54h dmi.board.vendor: Hewlett-Packard dmi.chassis.asset.tag: CZC7451V4Q dmi.chassis.type: 4 dmi.chassis.vendor: Hewlett-Packard dmi.modalias: dmi:bvnHewlett-Packard:bvr786E1v01.10:bd04/13/2007:svnHewlett-Packard:pnHPCompaqdc7700SmallFormFactor:pvr:rvnHewlett-Packard:rn0A54h:rvr:cvnHewlett-Packard:ct4:cvr: dmi.product.name: HP Compaq dc7700 Small Form Factor dmi.sys.vendor: Hewlett-Packard To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1176577/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1176577] Re: [HP Compaq dc7700 Small Form Factor PC] mei unexpected reset in kernel 3.8
Ldx, could you please advise if this is still reproducible in a supported release? ** Package changed: linux (Arch Linux) => linux (Ubuntu) ** Changed in: linux (Ubuntu) Status: New => Incomplete ** Changed in: linux (Ubuntu) Importance: Undecided => Low ** Tags added: bios-outdated-1.16 -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1176577 Title: [HP Compaq dc7700 Small Form Factor PC] mei unexpected reset in kernel 3.8 Status in linux package in Ubuntu: Incomplete Bug description: Right after upgrading kernel from 3.5 to 3.8 (Ubuntu 13.04), the syslog got flooded by a large number of such messages: (cut) May 5 15:33:15 compaq-aldo kernel: [ 205.064042] mei :00:03.0: unexpected reset: dev_state = RESETING May 5 15:33:21 compaq-aldo kernel: [ 211.076029] mei :00:03.0: unexpected reset: dev_state = RESETING May 5 15:33:27 compaq-aldo kernel: [ 217.088035] mei :00:03.0: unexpected reset: dev_state = RESETING May 5 15:33:33 compaq-aldo kernel: [ 223.100039] mei :00:03.0: unexpected reset: dev_state = RESETING May 5 15:33:39 compaq-aldo kernel: [ 229.112045] mei :00:03.0: unexpected reset: dev_state = RESETING (cut) This was associated by non reliable ethernet functionality, i.e. transfer of large files from my Ubuntu box to a local NAS connected via ethernet got hanging with no other apparent errors or diagnostics: nautilus copy just stopped transferring data, leaving the copy window there with the progress bar stopped. I tried to reboot, but this behaviour is perfectly reproducible. This is one of the first syslog lines got from that kernel: May 5 15:30:15 compaq-aldo kernel: [0.00] Linux version 3.8.0-19-generic (buildd@roseapple) (gcc version 4.7.3 (Ubuntu/Linaro 4.7.3-1ubuntu1) ) #30-Ubuntu SMP Wed May 1 16:36:13 UTC 2013 (Ubuntu 3.8.0-19.30-generic 3.8.8) I attach the whole syslog from boot of that kernel. On the same box, launching a previsous kernel (3.5) works flawlessly. For the time being, I removed 3.8 kernel from my box, now running 3.5. Kind regards Aldo --- ApportVersion: 2.9.2-0ubuntu8 Architecture: i386 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: ldx2074 F pulseaudio /dev/snd/controlC0: ldx2074 F pulseaudio CRDA: Error: command ['iw', 'reg', 'get'] failed with exit code 1: nl80211 not found. DistroRelease: Ubuntu 13.04 HibernationDevice: RESUME=UUID=32cc5d6d-43c1-4e97-a8b7-10b71aac3e29 InstallationDate: Installed on 2013-01-04 (121 days ago) InstallationMedia: Ubuntu 12.10 "Quantal Quetzal" - Release i386 (20121017.2) IwConfig: lono wireless extensions. eth0 no wireless extensions. MachineType: Hewlett-Packard HP Compaq dc7700 Small Form Factor MarkForUpload: True Package: linux (not installed) ProcEnviron: TERM=xterm PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=it_IT.UTF-8 SHELL=/bin/bash ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.8.0-19-generic root=UUID=38ce1d51-c3cf-438d-b395-f7c4744e2e37 ro quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 3.8.0-19.30-generic 3.8.8 RelatedPackageVersions: linux-restricted-modules-3.8.0-19-generic N/A linux-backports-modules-3.8.0-19-generic N/A linux-firmware1.106 RfKill: Tags: raring Uname: Linux 3.8.0-19-generic i686 UpgradeStatus: Upgraded to raring on 2013-04-26 (9 days ago) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo wireshark dmi.bios.date: 04/13/2007 dmi.bios.vendor: Hewlett-Packard dmi.bios.version: 786E1 v01.10 dmi.board.name: 0A54h dmi.board.vendor: Hewlett-Packard dmi.chassis.asset.tag: CZC7451V4Q dmi.chassis.type: 4 dmi.chassis.vendor: Hewlett-Packard dmi.modalias: dmi:bvnHewlett-Packard:bvr786E1v01.10:bd04/13/2007:svnHewlett-Packard:pnHPCompaqdc7700SmallFormFactor:pvr:rvnHewlett-Packard:rn0A54h:rvr:cvnHewlett-Packard:ct4:cvr: dmi.product.name: HP Compaq dc7700 Small Form Factor dmi.sys.vendor: Hewlett-Packard To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1176577/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1242310] [NEW] Bluetooth disabled after resume
You have been subscribed to a public bug: On Ubuntu 13.10 a Lenovo X1 Carbon running Ubuntu 64-bit has problems to communicate with bluetooth input devices on resume from suspend. This problem happened only after upgrade to Ubuntu 13.10. Reloading the module btusb fixes the problem (rmmod btusb; modprobe btusb). Placing the module name btusb in the MODULES parameter on /etc/default/acpi-support does not fix the problem. I had to create a script in /etc/pm/sleep.d/ to make the module reload successfully. ** Affects: linux (Ubuntu) Importance: Undecided Status: New -- Bluetooth disabled after resume https://bugs.launchpad.net/bugs/1242310 You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1176577] [NEW] [HP Compaq dc7700 Small Form Factor PC] mei unexpected reset in kernel 3.8
You have been subscribed to a public bug: Right after upgrading kernel from 3.5 to 3.8 (Ubuntu 13.04), the syslog got flooded by a large number of such messages: (cut) May 5 15:33:15 compaq-aldo kernel: [ 205.064042] mei :00:03.0: unexpected reset: dev_state = RESETING May 5 15:33:21 compaq-aldo kernel: [ 211.076029] mei :00:03.0: unexpected reset: dev_state = RESETING May 5 15:33:27 compaq-aldo kernel: [ 217.088035] mei :00:03.0: unexpected reset: dev_state = RESETING May 5 15:33:33 compaq-aldo kernel: [ 223.100039] mei :00:03.0: unexpected reset: dev_state = RESETING May 5 15:33:39 compaq-aldo kernel: [ 229.112045] mei :00:03.0: unexpected reset: dev_state = RESETING (cut) This was associated by non reliable ethernet functionality, i.e. transfer of large files from my Ubuntu box to a local NAS connected via ethernet got hanging with no other apparent errors or diagnostics: nautilus copy just stopped transferring data, leaving the copy window there with the progress bar stopped. I tried to reboot, but this behaviour is perfectly reproducible. This is one of the first syslog lines got from that kernel: May 5 15:30:15 compaq-aldo kernel: [0.00] Linux version 3.8.0-19-generic (buildd@roseapple) (gcc version 4.7.3 (Ubuntu/Linaro 4.7.3-1ubuntu1) ) #30-Ubuntu SMP Wed May 1 16:36:13 UTC 2013 (Ubuntu 3.8.0-19.30-generic 3.8.8) I attach the whole syslog from boot of that kernel. On the same box, launching a previsous kernel (3.5) works flawlessly. For the time being, I removed 3.8 kernel from my box, now running 3.5. Kind regards Aldo --- ApportVersion: 2.9.2-0ubuntu8 Architecture: i386 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: ldx2074 F pulseaudio /dev/snd/controlC0: ldx2074 F pulseaudio CRDA: Error: command ['iw', 'reg', 'get'] failed with exit code 1: nl80211 not found. DistroRelease: Ubuntu 13.04 HibernationDevice: RESUME=UUID=32cc5d6d-43c1-4e97-a8b7-10b71aac3e29 InstallationDate: Installed on 2013-01-04 (121 days ago) InstallationMedia: Ubuntu 12.10 "Quantal Quetzal" - Release i386 (20121017.2) IwConfig: lono wireless extensions. eth0 no wireless extensions. MachineType: Hewlett-Packard HP Compaq dc7700 Small Form Factor MarkForUpload: True Package: linux (not installed) ProcEnviron: TERM=xterm PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=it_IT.UTF-8 SHELL=/bin/bash ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.8.0-19-generic root=UUID=38ce1d51-c3cf-438d-b395-f7c4744e2e37 ro quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 3.8.0-19.30-generic 3.8.8 RelatedPackageVersions: linux-restricted-modules-3.8.0-19-generic N/A linux-backports-modules-3.8.0-19-generic N/A linux-firmware1.106 RfKill: Tags: raring Uname: Linux 3.8.0-19-generic i686 UpgradeStatus: Upgraded to raring on 2013-04-26 (9 days ago) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo wireshark dmi.bios.date: 04/13/2007 dmi.bios.vendor: Hewlett-Packard dmi.bios.version: 786E1 v01.10 dmi.board.name: 0A54h dmi.board.vendor: Hewlett-Packard dmi.chassis.asset.tag: CZC7451V4Q dmi.chassis.type: 4 dmi.chassis.vendor: Hewlett-Packard dmi.modalias: dmi:bvnHewlett-Packard:bvr786E1v01.10:bd04/13/2007:svnHewlett-Packard:pnHPCompaqdc7700SmallFormFactor:pvr:rvnHewlett-Packard:rn0A54h:rvr:cvnHewlett-Packard:ct4:cvr: dmi.product.name: HP Compaq dc7700 Small Form Factor dmi.sys.vendor: Hewlett-Packard ** Affects: linux (Ubuntu) Importance: Undecided Status: Incomplete ** Tags: apport-collected kernel-bug-exists-upstream-v3.9 needs-upstream-testing patch raring regression-release trusty -- [HP Compaq dc7700 Small Form Factor PC] mei unexpected reset in kernel 3.8 https://bugs.launchpad.net/bugs/1176577 You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1176577] [NEW] [HP Compaq dc7700 Small Form Factor PC] mei unexpected reset in kernel 3.8
You have been subscribed to a public bug: Right after upgrading kernel from 3.5 to 3.8 (Ubuntu 13.04), the syslog got flooded by a large number of such messages: (cut) May 5 15:33:15 compaq-aldo kernel: [ 205.064042] mei :00:03.0: unexpected reset: dev_state = RESETING May 5 15:33:21 compaq-aldo kernel: [ 211.076029] mei :00:03.0: unexpected reset: dev_state = RESETING May 5 15:33:27 compaq-aldo kernel: [ 217.088035] mei :00:03.0: unexpected reset: dev_state = RESETING May 5 15:33:33 compaq-aldo kernel: [ 223.100039] mei :00:03.0: unexpected reset: dev_state = RESETING May 5 15:33:39 compaq-aldo kernel: [ 229.112045] mei :00:03.0: unexpected reset: dev_state = RESETING (cut) This was associated by non reliable ethernet functionality, i.e. transfer of large files from my Ubuntu box to a local NAS connected via ethernet got hanging with no other apparent errors or diagnostics: nautilus copy just stopped transferring data, leaving the copy window there with the progress bar stopped. I tried to reboot, but this behaviour is perfectly reproducible. This is one of the first syslog lines got from that kernel: May 5 15:30:15 compaq-aldo kernel: [0.00] Linux version 3.8.0-19-generic (buildd@roseapple) (gcc version 4.7.3 (Ubuntu/Linaro 4.7.3-1ubuntu1) ) #30-Ubuntu SMP Wed May 1 16:36:13 UTC 2013 (Ubuntu 3.8.0-19.30-generic 3.8.8) I attach the whole syslog from boot of that kernel. On the same box, launching a previsous kernel (3.5) works flawlessly. For the time being, I removed 3.8 kernel from my box, now running 3.5. Kind regards Aldo --- ApportVersion: 2.9.2-0ubuntu8 Architecture: i386 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: ldx2074 F pulseaudio /dev/snd/controlC0: ldx2074 F pulseaudio CRDA: Error: command ['iw', 'reg', 'get'] failed with exit code 1: nl80211 not found. DistroRelease: Ubuntu 13.04 HibernationDevice: RESUME=UUID=32cc5d6d-43c1-4e97-a8b7-10b71aac3e29 InstallationDate: Installed on 2013-01-04 (121 days ago) InstallationMedia: Ubuntu 12.10 "Quantal Quetzal" - Release i386 (20121017.2) IwConfig: lono wireless extensions. eth0 no wireless extensions. MachineType: Hewlett-Packard HP Compaq dc7700 Small Form Factor MarkForUpload: True Package: linux (not installed) ProcEnviron: TERM=xterm PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=it_IT.UTF-8 SHELL=/bin/bash ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.8.0-19-generic root=UUID=38ce1d51-c3cf-438d-b395-f7c4744e2e37 ro quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 3.8.0-19.30-generic 3.8.8 RelatedPackageVersions: linux-restricted-modules-3.8.0-19-generic N/A linux-backports-modules-3.8.0-19-generic N/A linux-firmware1.106 RfKill: Tags: raring Uname: Linux 3.8.0-19-generic i686 UpgradeStatus: Upgraded to raring on 2013-04-26 (9 days ago) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo wireshark dmi.bios.date: 04/13/2007 dmi.bios.vendor: Hewlett-Packard dmi.bios.version: 786E1 v01.10 dmi.board.name: 0A54h dmi.board.vendor: Hewlett-Packard dmi.chassis.asset.tag: CZC7451V4Q dmi.chassis.type: 4 dmi.chassis.vendor: Hewlett-Packard dmi.modalias: dmi:bvnHewlett-Packard:bvr786E1v01.10:bd04/13/2007:svnHewlett-Packard:pnHPCompaqdc7700SmallFormFactor:pvr:rvnHewlett-Packard:rn0A54h:rvr:cvnHewlett-Packard:ct4:cvr: dmi.product.name: HP Compaq dc7700 Small Form Factor dmi.sys.vendor: Hewlett-Packard ** Affects: linux (Arch Linux) Importance: Undecided Status: New ** Affects: linux (Ubuntu) Importance: Undecided Status: New ** Tags: apport-collected kernel-bug-exists-upstream-v3.9 needs-upstream-testing patch raring regression-release trusty -- [HP Compaq dc7700 Small Form Factor PC] mei unexpected reset in kernel 3.8 https://bugs.launchpad.net/bugs/1176577 You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1725350] Comment bridged from LTC Bugzilla
--- Comment From alin...@br.ibm.com 2017-10-29 16:09 EDT--- (In reply to comment #25) > Can you see if this bug also happens with the following two kernels: > > v4.13 Upstream: > http://kernel.ubuntu.com/~jsalisbury/lp1725350/4.13/ > > Ubuntu 17.04 -proposed: > https://launchpad.net/~canonical-kernel-team/+archive/ubuntu/ppa/+build/ > 13563578 The bug only happens on v4.13 kernel. On Ubuntu 17.04 it is not reproducible. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1725350 Title: KVM on 17.10 crashes the machine Status in The Ubuntu-power-systems project: New Status in linux package in Ubuntu: New Status in linux source package in Artful: New Bug description: When you start qemu on a 17.10 machine, the whole machine goes down and crashes: [ 90.689627] Unable to handle kernel paging request for data at address 0xf2d3bda0 [ 90.689705] Faulting instruction address: 0xc0361224 [ 90.689840] Oops: Kernel access of bad area, sig: 11 [#1] [ 90.689911] SMP NR_CPUS=2048 [ 90.689912] NUMA [ 90.690053] PowerNV [ 90.690092] Modules linked in: xt_CHECKSUM iptable_mangle ipt_MASQUERADE nf_nat_masquerade_ipv4 iptable_nat xt_conntrack ipt_REJECT nf_reject_ipv4 xt_tcpudp bridge stp llc kvm_hv kvm_pr kvm ebtable_filter ebtables ip6table_filter ip6_tables iptable_filter openvswitch nf_conntrack_ipv6 nf_nat_ipv6 nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_defrag_ipv6 nf_nat nf_conntrack_netlink nf_conntrack nfnetlink idt_89hpesx snd_hda_codec_hdmi xfs joydev input_leds mac_hid snd_hda_intel snd_hda_codec snd_hda_core snd_hwdep snd_pcm snd_timer snd soundcore ofpart opal_prd cmdlinepart powernv_flash mtd at24 ipmi_powernv ipmi_devintf ipmi_msghandler powernv_rng uio_pdrv_genirq vmx_crypto ibmpowernv uio ib_iser rdma_cm iw_cm ib_cm ib_core iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi sunrpc ip_tables x_tables [ 90.690724] autofs4 btrfs raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor hid_generic usbhid hid raid6_pq libcrc32c raid1 raid0 multipath linear uas usb_storage ast crct10dif_vpmsum i2c_algo_bit crc32c_vpmsum ttm drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops drm tg3 ahci libahci [ 90.690937] CPU: 48 PID: 3986 Comm: qemu-system-ppc Not tainted 4.13.0-12-generic #13-Ubuntu [ 90.691001] task: c00b122d8700 task.stack: c00b431cc000 [ 90.691167] NIP: c0361224 LR: c0998960 CTR: c09a19b0 [ 90.691223] REGS: c00bff61b800 TRAP: 0300 Not tainted (4.13.0-12-generic) [ 90.691277] MSR: 90009033[ 90.691282] CR: 88002844 XER: [ 90.691347] CFAR: c099895c DAR: f2d3bda0 DSISR: 4000 SOFTE: 0 [ 90.691347] GPR00: c0998960 c00bff61ba80 c15e3000 c00b4ef61f20 [ 90.691347] GPR04: c00b44c61680 001f 001f [ 90.691347] GPR08: 001f 02d3bd80 c178e8e8 c00b5a0c26f0 [ 90.691347] GPR12: 28002842 cfadf800 c00b52d07880 c00b44c61680 [ 90.691347] GPR16: 001f 001f c553a560 [ 90.691347] GPR20: 0001 0002 08000553a560 c00b5c62a228 [ 90.691347] GPR24: c5531110 c00b5c632238 0210 [ 90.691347] GPR28: c0998960 c00bff61bc20 c00b4ef61f20 f2d3bd80 [ 90.692089] NIP [c0361224] kfree+0x54/0x270 [ 90.692133] LR [c0998960] xhci_urb_free_priv+0x20/0x40 [ 90.692325] Call Trace: [ 90.692345] [c00bff61ba80] [c00bff61bad0] 0xc00bff61bad0 (unreliable) [ 90.692402] [c00bff61bac0] [c0998960] xhci_urb_free_priv+0x20/0x40 [ 90.692459] [c00bff61bae0] [c099bfc8] xhci_giveback_urb_in_irq.isra.22+0x78/0x190 [ 90.692645] [c00bff61bb40] [c099c350] xhci_td_cleanup+0x130/0x200 [ 90.692702] [c00bff61bbc0] [c09a175c] handle_tx_event+0x74c/0x1380 [ 90.692759] [c00bff61bcc0] [c09a2894] xhci_irq+0x504/0xf20 [ 90.692808] [c00bff61bde0] [c017b110] __handle_irq_event_percpu+0x90/0x300 [ 90.692977] [c00bff61bea0] [c017b3b8] handle_irq_event_percpu+0x38/0x90 [ 90.693038] [c00bff61bee0] [c017b474] handle_irq_event+0x64/0xb0 [ 90.693094] [c00bff61bf10] [c0180da0] handle_fasteoi_irq+0xc0/0x230 [ 90.693155] [c00bff61bf40] [c017972c] generic_handle_irq+0x4c/0x70 [ 90.693332] [c00bff61bf60] [c001767c] __do_irq+0x7c/0x1c0 [ 90.693383] [c00bff61bf90] [c002ab70] call_do_irq+0x14/0x24 [ 90.693431] [c00b431cf9d0] [c001785c] do_IRQ+0x9c/0x130 [
[Kernel-packages] [Bug 913272] Re: drm:intel_dsm_platform_mux_info] *ERROR* MUX INFO call failed
OR using EOL release, no logs, and no response for years. ** No longer affects: linux (Ubuntu) ** Package changed: linux (Fedora) => linux (Ubuntu) ** Changed in: linux (Ubuntu) Importance: Low => Undecided ** Changed in: linux (Ubuntu) Status: Fix Released => New ** Changed in: linux (Ubuntu) Remote watch: Red Hat Bugzilla #846382 => None ** Changed in: linux (Ubuntu) Status: New => Invalid -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/913272 Title: drm:intel_dsm_platform_mux_info] *ERROR* MUX INFO call failed Status in linux package in Ubuntu: Invalid Bug description: drm:intel_dsm_platform_mux_info] *ERROR* MUX INFO call failed. Unable to install latest version Unbuntu 11.10 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/913272/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1070837] Re: general protection fault: 0000 [#1] SMP; RIP: 0010:[] [] HostIF_SafeRDMSR+0xf/0x30 [vmmon]
** Changed in: linux (Fedora) Remote watch: Red Hat Bugzilla #861837 => None -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1070837 Title: general protection fault: [#1] SMP; RIP: 0010:[] [] HostIF_SafeRDMSR+0xf/0x30 [vmmon] Status in linux package in Ubuntu: Invalid Status in vmware-player package in Ubuntu: Invalid Status in linux package in Fedora: Invalid Bug description: Binary package hint: VMware-Player-5.0.0-812388.x86_64 This issue affects: >=vmware-player-5 >=vmware-workstation-9 >=linux-3.5. $ lsb_release -rd Description: Ubuntu 12.10 Release: 12.10 $ cat /proc/version_signature Ubuntu 3.5.0-18.29-generic 3.5.7 Without the following attachments: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1070837/+attachment/3414246/+files/vmware3.5.patch https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1070837/+attachment/3414247/+files/patch-modules_3.5.0.sh I get a general protection fault as shown in /var/log/kern.log : Oct 24 20:29:29 taaroa kernel: [ 6274.537691] /dev/vmmon[17155]: PTSC: initialized at 219611 Hz using TSC, TSCs are synchronized. Oct 24 20:29:29 taaroa kernel: [ 6274.539846] general protection fault: [#1] SMP Oct 24 20:29:29 taaroa kernel: [ 6274.539873] CPU 1 Oct 24 20:29:29 taaroa kernel: [ 6274.539881] Modules linked in: vmnet(O) parport_pc vsock(O) vmci(O) vmmon(O) bbswitch(O) ppdev bnep rfcomm bluetooth snd_hda_codec_hdmi snd_hda_codec_realtek joydev snd_hda_intel snd_hda_codec xt_hl ip6t_rt nf_conntrack_ipv6 snd_hwdep snd_pcm nf_defrag_ipv6 snd_seq_midi ipt_REJECT kvm_intel snd_rawmidi snd_seq_midi_event kvm snd_seq xt_LOG snd_timer snd_seq_device xt_limit xt_tcpudp xt_addrtype snd xt_state arc4 soundcore uvcvideo iwlwifi ip6table_filter ghash_clmulni_intel i915 ip6_tables videobuf2_core nf_conntrack_netbios_ns snd_page_alloc videodev mac80211 aesni_intel asus_nb_wmi nf_conntrack_broadcast videobuf2_vmalloc asus_wmi mxm_wmi nf_nat_ftp nf_nat cryptd drm_kms_helper nf_conntrack_ipv4 aes_x86_64 videobuf2_memops nf_defrag_ipv4 lpc_ich nf_conntrack_ftp drm psmouse cfg80211 nf_conntrack serio_raw sparse_keymap mac_hid coretemp wmi i2c_algo_bit iptable_filter lp ip_tables mei video x_tables microcode parport hid_generic usbhid hid atl1c [last unloaded: vmnet] Oct 24 20:29:29 taaroa kernel: [ 6274.540261] Oct 24 20:29:29 taaroa kernel: [ 6274.540264] Pid: 17155, comm: vmware-vmx Tainted: G O 3.5.0-18-generic #29-Ubuntu ASUSTeK Computer Inc. K53SD/K53SD Oct 24 20:29:29 taaroa kernel: [ 6274.540302] RIP: 0010:[] [] HostIF_SafeRDMSR+0xf/0x30 [vmmon] Oct 24 20:29:29 taaroa kernel: [ 6274.540336] RSP: 0018:88019e89db08 EFLAGS: 00010246 Oct 24 20:29:29 taaroa kernel: [ 6274.540353] RAX: RBX: 0001 RCX: 0491 Oct 24 20:29:29 taaroa kernel: [ 6274.540375] RDX: RSI: 880208eea010 RDI: 0491 Oct 24 20:29:29 taaroa kernel: [ 6274.540397] RBP: 88019e89db08 R08: 88024f436830 R09: a0511882 Oct 24 20:29:29 taaroa kernel: [ 6274.540419] R10: 01ec9be4 R11: 3246 R12: Oct 24 20:29:29 taaroa kernel: [ 6274.540441] R13: 880208eea000 R14: 880208eea000 R15: 7fffb9150bf0 Oct 24 20:29:29 taaroa kernel: [ 6274.540463] FS: 7f985e0db700() GS:88024f42() knlGS: Oct 24 20:29:29 taaroa kernel: [ 6274.540488] CS: 0010 DS: ES: CR0: 80050033 Oct 24 20:29:29 taaroa kernel: [ 6274.540505] CR2: 01eca018 CR3: 000214f64000 CR4: 000407e0 Oct 24 20:29:29 taaroa kernel: [ 6274.540527] DR0: DR1: DR2: Oct 24 20:29:29 taaroa kernel: [ 6274.540549] DR3: DR6: 0ff0 DR7: 0400 Oct 24 20:29:29 taaroa kernel: [ 6274.541483] Process vmware-vmx (pid: 17155, threadinfo 88019e89c000, task 880208ec5c00) Oct 24 20:29:29 taaroa kernel: [ 6274.542403] Stack: Oct 24 20:29:29 taaroa kernel: [ 6274.543324] 88019e89db38 a0516b73 a0516af0 88019e89db68 Oct 24 20:29:29 taaroa kernel: [ 6274.544280] 880208eea000 88019e89db58 a0512990 Oct 24 20:29:29 taaroa kernel: [ 6274.545252] 880208eea000 fff4 88019e89db88 a051896c Oct 24 20:29:29 taaroa kernel: [ 6274.546231] Call Trace: Oct 24 20:29:29 taaroa kernel: [ 6274.547212] [] Vmx86GetMSR+0x83/0xd0 [vmmon] Oct 24 20:29:29 taaroa kernel: [ 6274.548213] [] ? Vmx86GetUnavailPerfCtrsOnCPU+0x150/0x150 [vmmon] Oct 24 20:29:29 taaroa kernel: [ 6274.549226] [] HostIF_CallOnEachCPU+0x20/0x40 [vmmon] Oct 24 20:29:29 taaroa kernel: [ 6274.550242] [] Vmx86_GetAllMSRs+0x2c/0x50 [vmmon] Oct 24 20:29:29 taaroa kernel: [ 6274.551214]
[Kernel-packages] [Bug 1173997] Re: [HP 6730b] Fan at full speed after suspend
OR using EOL release, and no response for years. ** No longer affects: linux (Ubuntu) ** Package changed: linux (Fedora) => linux (Ubuntu) ** Changed in: linux (Ubuntu) Status: Fix Released => New ** Changed in: linux (Ubuntu) Remote watch: Red Hat Bugzilla #895276 => None ** Changed in: linux (Ubuntu) Status: New => Invalid -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1173997 Title: [HP 6730b] Fan at full speed after suspend Status in linux package in Ubuntu: Invalid Bug description: After upgrading to 13.04 the fan of my HP 6730b runs at full speed when resuming after suspend. Before the suspend everything is ok. Workaround is to boot with the old kernel from 12.10 (3.5.0-27). I also tried mainline build 3.8.9-030809. Problem occurs there as well. --- ApportVersion: 2.9.2-0ubuntu8 Architecture: i386 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: mnl2949 F pulseaudio CRDA: country DE: (2400 - 2483 @ 40), (N/A, 20) (5150 - 5250 @ 40), (N/A, 20), NO-OUTDOOR (5250 - 5350 @ 40), (N/A, 20), NO-OUTDOOR, DFS (5470 - 5725 @ 40), (N/A, 26), DFS DistroRelease: Ubuntu 13.04 HibernationDevice: RESUME=UUID=86292e17-edd2-4a1b-8e1b-5208a1731140 InstallationDate: Installed on 2010-11-10 (900 days ago) InstallationMedia: Ubuntu 10.10 "Maverick Meerkat" - Release i386 (20101007) MachineType: Hewlett-Packard HP Compaq 6730b (GB990EA#ABD) MarkForUpload: True Package: linux (not installed) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.8.0-19-generic root=UUID=cff10fb4-08a2-459b-be12-80698b20d2d3 ro quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 3.8.0-19.29-generic 3.8.8 RelatedPackageVersions: linux-restricted-modules-3.8.0-19-generic N/A linux-backports-modules-3.8.0-19-generic N/A linux-firmware1.106 Tags: raring Uname: Linux 3.8.0-19-generic i686 UpgradeStatus: Upgraded to raring on 2013-04-28 (0 days ago) UserGroups: adm admin cdrom dialout libvirtd lpadmin plugdev sambashare voice wireshark dmi.bios.date: 12/07/2011 dmi.bios.vendor: Hewlett-Packard dmi.bios.version: 68PDD Ver. F.20 dmi.board.name: 30DD dmi.board.vendor: Hewlett-Packard dmi.board.version: KBC Version 96.23 dmi.chassis.asset.tag: CNU9326SJY dmi.chassis.type: 10 dmi.chassis.vendor: Hewlett-Packard dmi.modalias: dmi:bvnHewlett-Packard:bvr68PDDVer.F.20:bd12/07/2011:svnHewlett-Packard:pnHPCompaq6730b(GB990EA#ABD):pvrF.20:rvnHewlett-Packard:rn30DD:rvrKBCVersion96.23:cvnHewlett-Packard:ct10:cvr: dmi.product.name: HP Compaq 6730b (GB990EA#ABD) dmi.product.version: F.20 dmi.sys.vendor: Hewlett-Packard To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1173997/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1029790] Re: 1002:714a Can't boot without nomodeset option-kernel 3.5.X.X/3.6.X.X ATI M52 [Mobility Radeon X1300]
** Changed in: linux (Fedora) Remote watch: Red Hat Bugzilla #845745 => None -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1029790 Title: 1002:714a Can't boot without nomodeset option-kernel 3.5.X.X/3.6.X.X ATI M52 [Mobility Radeon X1300] Status in linux package in Ubuntu: Fix Released Status in linux package in Fedora: Invalid Bug description: I'm using Ubuntu quantal (development branch), since the new 3.5 kernel coming, I can't boot I don't know where is the problem, kernel or ati module, but with 3.4 kernel there is no problem booting the Ubuntu. When choose the 3.5 kernel from grub menu and start loading, after 10-15 seconds, just freeze, and can't do anything. I tried and mainline kernel from kernel-ppa/mainline but no change, still can't boot. A Ubuntu kernel version bisect revealed that 3.4.0-5.11 works and the first problematic kernel is 3.5.0-1.1 . WORKAROUND: 1. edit grub command line to add 'nomodeset' and boot. 2. Then add 'nomodeset' in GRUB2's kernel command line (using GRUB_CMDLINE_LINUX in /etc/default/grub) and run 'sudo update-grub' 3. Add the following to /etc/rc.d/rc.local: modprobe -r radeon modprobe -r drm modprobe radeon modeset=1 4. Remove ~/.Xauthority 5. Reboot WORKAROUND: Use kernel parameter: nomodeset However, with nomodeset, 3D don't work correctly, cant use normal unity session, unity 2D session works but with artifacts. ProblemType: Bug DistroRelease: Ubuntu 12.10 Package: linux-image-generic 3.5.0.6.6 ProcVersionSignature: Ubuntu 3.4.0-5.11-generic 3.4.0 Uname: Linux 3.4.0-5-generic x86_64 ApportVersion: 2.4-0ubuntu5 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: tolostoi 1789 F pulseaudio Date: Fri Jul 27 09:38:39 2012 HibernationDevice: RESUME=UUID=8f2b4b51-ca26-4a68-8969-ea8e5c00f4b6 InstallationMedia: Ubuntu 12.04 LTS "Precise Pangolin" - Beta amd64 (20120408) MachineType: Hewlett-Packard HP Compaq nc6400 (RH484EA#ABB) PccardctlIdent: Socket 0: no product info available PccardctlStatus: Socket 0: no card ProcFB: 0 radeondrmfb ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.4.0-5-generic root=UUID=c2283854-278c-4d59-93dd-d05801489a93 ro quiet splash RelatedPackageVersions: linux-restricted-modules-3.4.0-5-generic N/A linux-backports-modules-3.4.0-5-generic N/A linux-firmware 1.86 SourcePackage: linux UpgradeStatus: Upgraded to quantal on 2012-06-11 (45 days ago) dmi.bios.date: 09/05/2007 dmi.bios.vendor: Hewlett-Packard dmi.bios.version: 68YCD Ver. F.0B dmi.board.name: 30AC dmi.board.vendor: Hewlett-Packard dmi.board.version: KBC Version 56.36 dmi.chassis.type: 10 dmi.chassis.vendor: Hewlett-Packard dmi.modalias: dmi:bvnHewlett-Packard:bvr68YCDVer.F.0B:bd09/05/2007:svnHewlett-Packard:pnHPCompaqnc6400(RH484EA#ABB):pvrF.0B:rvnHewlett-Packard:rn30AC:rvrKBCVersion56.36:cvnHewlett-Packard:ct10:cvr: dmi.product.name: HP Compaq nc6400 (RH484EA#ABB) dmi.product.version: F.0B dmi.sys.vendor: Hewlett-Packard --- ApportVersion: 2.9.2-0ubuntu8 Architecture: i386 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: ubuntu 3199 F pulseaudio CasperVersion: 1.331 DistroRelease: Ubuntu 13.04 LiveMediaBuild: Ubuntu 13.04 "Raring Ringtail" - Release i386 (20130424) MachineType: Hewlett-Packard HP Compaq nc6400 (RH484EA#ABB) MarkForUpload: True Package: linux (not installed) PccardctlIdent: Socket 0: no product info available PccardctlStatus: Socket 0: no card ProcEnviron: TERM=xterm PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: ProcKernelCmdLine: initrd=/casper/initrd.lz file=/cdrom/preseed/username.seed boot=casper nomodeset quiet splash -- BOOT_IMAGE=/casper/vmlinuz ProcVersionSignature: Ubuntu 3.8.0-19.29-generic 3.8.8 RelatedPackageVersions: linux-restricted-modules-3.8.0-19-generic N/A linux-backports-modules-3.8.0-19-generic N/A linux-firmware1.106 Tags: raring Uname: Linux 3.8.0-19-generic i686 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo dmi.bios.date: 09/05/2007 dmi.bios.vendor: Hewlett-Packard dmi.bios.version: 68YCD Ver. F.0B dmi.board.name: 30AC dmi.board.vendor: Hewlett-Packard dmi.board.version: KBC Version 56.36 dmi.chassis.type: 10 dmi.chassis.vendor: Hewlett-Packard dmi.modalias: dmi:bvnHewlett-Packard:bvr68YCDVer.F.0B:bd09/05/2007:svnHewlett-Packard:pnHPCompaqnc6400(RH484EA#ABB):pvrF.0B:rvnHewlett-Packard:rn30AC:rvrKBCVersion56.36:cvnHewlett-Packard:ct10:cvr: dmi.product.name: HP Compaq nc6400 (RH484EA#ABB) dmi.product.version: F.0B dmi.sys.vendor: Hewlett-Packard
[Kernel-packages] [Bug 652775] Re: WARNING: at /build/buildd/linux-2.6.35/include/net/mac80211.h:2601 rate_control_send_low+0xc2/0x140 [mac80211]()
OR using EOL release, and no response for years. ** No longer affects: linux (Ubuntu) ** Package changed: fedora => linux (Ubuntu) ** Changed in: linux (Ubuntu) Status: Fix Released => New ** Changed in: linux (Ubuntu) Remote watch: Red Hat Bugzilla #786609 => None ** Changed in: linux (Ubuntu) Status: New => Invalid -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/652775 Title: WARNING: at /build/buildd/linux-2.6.35/include/net/mac80211.h:2601 rate_control_send_low+0xc2/0x140 [mac80211]() Status in linux package in Ubuntu: Invalid Bug description: Seems to be not critical... ProblemType: KernelOops DistroRelease: Ubuntu 10.10 Package: linux-image-2.6.35-22-generic-pae 2.6.35-22.33 Regression: Yes Reproducible: No ProcVersionSignature: Ubuntu 2.6.35-22.33-generic-pae 2.6.35.4 Uname: Linux 2.6.35-22-generic-pae i686 NonfreeKernelModules: nvidia AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.23. Annotation: Your system might become unstable now and might need to be restarted. Architecture: i386 ArecordDevices: List of CAPTURE Hardware Devices card 0: Intel [HDA Intel], device 0: CONEXANT Analog [CONEXANT Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: kgeorgy1734 F pulseaudio CRDA: Error: [Errno 2] Aucun fichier ou dossier de ce type Card0.Amixer.info: Card hw:0 'Intel'/'HDA Intel at 0xf232 irq 47' Mixer name : 'Conexant CX20585' Components : 'HDA:14f15069,17aa21a4,00100302' Controls : 6 Simple ctrls : 4 Card1.Amixer.info: Card hw:1 'NVidia'/'HDA NVidia at 0xcdefc000 irq 16' Mixer name : 'Nvidia GT21x HDMI' Components : 'HDA:10de000b,10de0101,00100100' Controls : 16 Simple ctrls : 4 Card29.Amixer.info: Card hw:29 'ThinkPadEC'/'ThinkPad Console Audio Control at EC reg 0x30, fw 6UHT27WW-1.08' Mixer name : 'ThinkPad EC 6UHT27WW-1.08' Components : '' Controls : 1 Simple ctrls : 1 Card29.Amixer.values: Simple mixer control 'Console',0 Capabilities: pswitch pswitch-joined penum Playback channels: Mono Mono: Playback [on] Date: Fri Oct 1 09:42:48 2010 Failure: oops Frequency: Once a day. HibernationDevice: RESUME=UUID=0bc3930d-795a-4add-9dde-1318f3c643a0 InstallationMedia: Ubuntu 10.10 "Maverick Meerkat" - Beta i386 (20100901.1) MachineType: LENOVO 2912AE7 ProcCmdLine: BOOT_IMAGE=/boot/vmlinuz-2.6.35-22-generic-pae root=UUID=c413cbec-ba7a-4200-bb78-b6e35569868f ro quiet splash RelatedPackageVersions: linux-firmware 1.38 SourcePackage: linux Title: WARNING: at /build/buildd/linux-2.6.35/include/net/mac80211.h:2601 rate_control_send_low+0xc2/0x140 [mac80211]() dmi.bios.date: 03/25/2010 dmi.bios.vendor: LENOVO dmi.bios.version: 6UET33WW (1.11 ) dmi.board.name: 2912AE7 dmi.board.vendor: LENOVO dmi.board.version: Not Available dmi.chassis.asset.tag: No Asset Information dmi.chassis.type: 10 dmi.chassis.vendor: LENOVO dmi.chassis.version: Not Available dmi.modalias: dmi:bvnLENOVO:bvr6UET33WW(1.11):bd03/25/2010:svnLENOVO:pn2912AE7:pvrThinkPadT410s:rvnLENOVO:rn2912AE7:rvrNotAvailable:cvnLENOVO:ct10:cvrNotAvailable: dmi.product.name: 2912AE7 dmi.product.version: ThinkPad T410s dmi.sys.vendor: LENOVO To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/652775/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1034740] Re: 8086:4238 [Lenovo ThinkPad X201] iwlwifi drops connection when using 802.11n
OR using EOL release, and no response for years. ** Package changed: linux (Debian) => linux (Ubuntu) ** Changed in: linux (Ubuntu) Status: New => Invalid -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1034740 Title: 8086:4238 [Lenovo ThinkPad X201] iwlwifi drops connection when using 802.11n Status in linux package in Ubuntu: Invalid Bug description: Symptoms: After a few minutes, the WiFi connection to my home router first becomes slow (packet loss), then entirely unusable. NetWork manager still shows the connection as up and working. dmesg shows messages like these: Aug 9 06:17:16 thinkpad kernel: [ 5026.531127] iwlwifi :02:00.0: Tx aggrega tion enabled on ra = b0:48:7a:d6:91:50 tid = 6 WORKAROUND: rfkill to disable and enable WiFi, or add: options iwlwifi 11n_disable=1 to /etc/modprobe.d/iwlwifi.conf However, this means that all my network connections will only run in 802.11a/g mode, which is undesirably slow. Other people using MacOS in my place don't observe any issues, so I can rule out the router(s) as the culprits. Hardware: 02:00.0 Network controller: Intel Corporation Centrino Ultimate-N 6300 (rev 35) Routers: TP-Link WR1043ND, WR2543ND using OpenWRT trunk. ProblemType: Bug DistroRelease: Ubuntu 12.04 Package: linux-image-3.2.0-27-generic 3.2.0-27.43 ProcVersionSignature: Ubuntu 3.2.0-27.43-generic 3.2.21 Uname: Linux 3.2.0-27-generic x86_64 AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.24. ApportVersion: 2.0.1-0ubuntu12 Architecture: amd64 ArecordDevices: List of CAPTURE Hardware Devices card 0: Intel [HDA Intel], device 0: CONEXANT Analog [CONEXANT Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC29: alex 2261 F xfce4-volumed /dev/snd/controlC0: alex 2250 F pulseaudio alex 2261 F xfce4-volumed CRDA: Error: [Errno 2] No such file or directory Card0.Amixer.info: Card hw:0 'Intel'/'HDA Intel at 0xf252 irq 44' Mixer name : 'Intel IbexPeak HDMI' Components : 'HDA:14f15069,17aa2155,00100302 HDA:80862804,17aa21b5,0010' Controls : 14 Simple ctrls : 6 Card29.Amixer.info: Card hw:29 'ThinkPadEC'/'ThinkPad Console Audio Control at EC reg 0x30, fw 6QHT33WW-1.14' Mixer name : 'ThinkPad EC 6QHT33WW-1.14' Components : '' Controls : 1 Simple ctrls : 1 Card29.Amixer.values: Simple mixer control 'Console',0 Capabilities: pswitch pswitch-joined penum Playback channels: Mono Mono: Playback [on] Date: Thu Aug 9 12:24:19 2012 HibernationDevice: RESUME=UUID=9fee4cfb-53b9-43d7-8425-1666aff145c4 InstallationMedia: Xubuntu 12.04 LTS "Precise Pangolin" - Release amd64 (20120425) MachineType: LENOVO 3626A14 ProcEnviron: LANGUAGE=en_US:en TERM=xterm PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.2.0-27-generic root=/dev/mapper/hostname-root ro quiet splash vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-3.2.0-27-generic N/A linux-backports-modules-3.2.0-27-generic N/A linux-firmware1.79 SourcePackage: linux StagingDrivers: mei UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 04/26/2012 dmi.bios.vendor: LENOVO dmi.bios.version: 6QET69WW (1.39 ) dmi.board.name: 3626A14 dmi.board.vendor: LENOVO dmi.board.version: Not Available dmi.chassis.asset.tag: No Asset Information dmi.chassis.type: 10 dmi.chassis.vendor: LENOVO dmi.chassis.version: Not Available dmi.modalias: dmi:bvnLENOVO:bvr6QET69WW(1.39):bd04/26/2012:svnLENOVO:pn3626A14:pvrThinkPadX201:rvnLENOVO:rn3626A14:rvrNotAvailable:cvnLENOVO:ct10:cvrNotAvailable: dmi.product.name: 3626A14 dmi.product.version: ThinkPad X201 dmi.sys.vendor: LENOVO To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1034740/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1034740] Re: 8086:4238 [Lenovo ThinkPad X201] iwlwifi drops connection when using 802.11n
Status changed to 'Confirmed' because the bug affects multiple users. ** Changed in: linux (Ubuntu) Status: New => Confirmed -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1034740 Title: 8086:4238 [Lenovo ThinkPad X201] iwlwifi drops connection when using 802.11n Status in linux package in Ubuntu: Invalid Bug description: Symptoms: After a few minutes, the WiFi connection to my home router first becomes slow (packet loss), then entirely unusable. NetWork manager still shows the connection as up and working. dmesg shows messages like these: Aug 9 06:17:16 thinkpad kernel: [ 5026.531127] iwlwifi :02:00.0: Tx aggrega tion enabled on ra = b0:48:7a:d6:91:50 tid = 6 WORKAROUND: rfkill to disable and enable WiFi, or add: options iwlwifi 11n_disable=1 to /etc/modprobe.d/iwlwifi.conf However, this means that all my network connections will only run in 802.11a/g mode, which is undesirably slow. Other people using MacOS in my place don't observe any issues, so I can rule out the router(s) as the culprits. Hardware: 02:00.0 Network controller: Intel Corporation Centrino Ultimate-N 6300 (rev 35) Routers: TP-Link WR1043ND, WR2543ND using OpenWRT trunk. ProblemType: Bug DistroRelease: Ubuntu 12.04 Package: linux-image-3.2.0-27-generic 3.2.0-27.43 ProcVersionSignature: Ubuntu 3.2.0-27.43-generic 3.2.21 Uname: Linux 3.2.0-27-generic x86_64 AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.24. ApportVersion: 2.0.1-0ubuntu12 Architecture: amd64 ArecordDevices: List of CAPTURE Hardware Devices card 0: Intel [HDA Intel], device 0: CONEXANT Analog [CONEXANT Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC29: alex 2261 F xfce4-volumed /dev/snd/controlC0: alex 2250 F pulseaudio alex 2261 F xfce4-volumed CRDA: Error: [Errno 2] No such file or directory Card0.Amixer.info: Card hw:0 'Intel'/'HDA Intel at 0xf252 irq 44' Mixer name : 'Intel IbexPeak HDMI' Components : 'HDA:14f15069,17aa2155,00100302 HDA:80862804,17aa21b5,0010' Controls : 14 Simple ctrls : 6 Card29.Amixer.info: Card hw:29 'ThinkPadEC'/'ThinkPad Console Audio Control at EC reg 0x30, fw 6QHT33WW-1.14' Mixer name : 'ThinkPad EC 6QHT33WW-1.14' Components : '' Controls : 1 Simple ctrls : 1 Card29.Amixer.values: Simple mixer control 'Console',0 Capabilities: pswitch pswitch-joined penum Playback channels: Mono Mono: Playback [on] Date: Thu Aug 9 12:24:19 2012 HibernationDevice: RESUME=UUID=9fee4cfb-53b9-43d7-8425-1666aff145c4 InstallationMedia: Xubuntu 12.04 LTS "Precise Pangolin" - Release amd64 (20120425) MachineType: LENOVO 3626A14 ProcEnviron: LANGUAGE=en_US:en TERM=xterm PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.2.0-27-generic root=/dev/mapper/hostname-root ro quiet splash vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-3.2.0-27-generic N/A linux-backports-modules-3.2.0-27-generic N/A linux-firmware1.79 SourcePackage: linux StagingDrivers: mei UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 04/26/2012 dmi.bios.vendor: LENOVO dmi.bios.version: 6QET69WW (1.39 ) dmi.board.name: 3626A14 dmi.board.vendor: LENOVO dmi.board.version: Not Available dmi.chassis.asset.tag: No Asset Information dmi.chassis.type: 10 dmi.chassis.vendor: LENOVO dmi.chassis.version: Not Available dmi.modalias: dmi:bvnLENOVO:bvr6QET69WW(1.39):bd04/26/2012:svnLENOVO:pn3626A14:pvrThinkPadX201:rvnLENOVO:rn3626A14:rvrNotAvailable:cvnLENOVO:ct10:cvrNotAvailable: dmi.product.name: 3626A14 dmi.product.version: ThinkPad X201 dmi.sys.vendor: LENOVO To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1034740/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 886820] Re: [Kubuntu 11.10] Screen brightness control does not work on Samsung RV511 laptop
OR using EOL release, and no response for years. ** No longer affects: linux (Ubuntu) ** Package changed: fedora => linux (Ubuntu) ** Changed in: linux (Ubuntu) Importance: Medium => Undecided ** Changed in: linux (Ubuntu) Status: Won't Fix => New ** Changed in: linux (Ubuntu) Remote watch: Red Hat Bugzilla #796626 => None ** Changed in: linux (Ubuntu) Status: New => Invalid -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/886820 Title: [Kubuntu 11.10] Screen brightness control does not work on Samsung RV511 laptop Status in linux package in Ubuntu: Invalid Bug description: The Fn keys does show the brightness indicator, but the brightness itself is not changed. The brightness regulator in the power applet in the notification area does not work either. lspci 00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 02) 00:01.0 PCI bridge: Intel Corporation Core Processor PCI Express x16 Root Port (rev 02) 00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06) 00:1a.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05) 00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 05) 00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 05) 00:1c.3 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 4 (rev 05) 00:1d.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a5) 00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 05) 00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA AHCI Controller (rev 05) 00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 05) 00:1f.6 Signal processing controller: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem (rev 05) 02:00.0 VGA compatible controller: nVidia Corporation Device 0a7a (rev a2) 02:00.1 Audio device: nVidia Corporation High Definition Audio Controller (rev a1) 03:00.0 Network controller: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller (rev 01) 05:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06) 3f:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 02) 3f:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 02) 3f:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 02) 3f:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 02) 3f:02.2 Host bridge: Intel Corporation Core Processor Reserved (rev 02) 3f:02.3 Host bridge: Intel Corporation Core Processor Reserved (rev 02) lspci -n 00:00.0 0600: 8086:0044 (rev 02) 00:01.0 0604: 8086:0045 (rev 02) 00:16.0 0780: 8086:3b64 (rev 06) 00:1a.0 0c03: 8086:3b3c (rev 05) 00:1b.0 0403: 8086:3b56 (rev 05) 00:1c.0 0604: 8086:3b42 (rev 05) 00:1c.3 0604: 8086:3b48 (rev 05) 00:1d.0 0c03: 8086:3b34 (rev 05) 00:1e.0 0604: 8086:2448 (rev a5) 00:1f.0 0601: 8086:3b09 (rev 05) 00:1f.2 0106: 8086:3b29 (rev 05) 00:1f.3 0c05: 8086:3b30 (rev 05) 00:1f.6 1180: 8086:3b32 (rev 05) 02:00.0 0300: 10de:0a7a (rev a2) 02:00.1 0403: 10de:0be3 (rev a1) 03:00.0 0280: 14e4:4727 (rev 01) 05:00.0 0200: 10ec:8168 (rev 06) 3f:00.0 0600: 8086:2c62 (rev 02) 3f:00.1 0600: 8086:2d01 (rev 02) 3f:02.0 0600: 8086:2d10 (rev 02) 3f:02.1 0600: 8086:2d11 (rev 02) 3f:02.2 0600: 8086:2d12 (rev 02) 3f:02.3 0600: 8086:2d13 (rev 02) --- AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.24. ApportVersion: 1.23-0ubuntu4 Architecture: i386 ArecordDevices: List of CAPTURE Hardware Devices card 0: Intel [HDA Intel], device 0: ALC269VB Analog [ALC269VB Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: stetzen1930 F pulseaudio /dev/snd/controlC0: stetzen1930 F pulseaudio CRDA: Error: [Errno 2] No such file or directory Card0.Amixer.info: Card hw:0 'Intel'/'HDA Intel at 0xfc80 irq 43' Mixer name : 'Realtek ALC269VB' Components : 'HDA:10ec0269,144dc581,00100100' Controls : 15 Simple ctrls : 10 Card1.Amixer.info: Card hw:1
[Kernel-packages] [Bug 974664] Re: Kernel Oops - BUG: unable to handle kernel paging request at ffffffffffffffb8; RIP: 0010:[] [] nfs_have_delegation+0x9/0x40 [nfs]
** Changed in: linux Importance: High => Undecided ** Changed in: linux Status: Fix Released => New ** Changed in: linux Remote watch: Red Hat Bugzilla #811138 => None ** Changed in: linux Status: New => Invalid -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/974664 Title: Kernel Oops - BUG: unable to handle kernel paging request at ffb8; RIP: 0010:[] [] nfs_have_delegation+0x9/0x40 [nfs] Status in Linux: Invalid Status in linux package in Ubuntu: Fix Released Status in linux source package in Precise: Fix Released Bug description: == Precise SRU Justification == This bug is preventing users from using NFS clients on Precise. Several users have reported the issue, which has been already fixed upstreams but did not made it into stable yet. == Fix == There are four commits that are relevant to fix this issue. From mainline kernel: - 14977489ffdb80d4caf5a184ba41b23b02fbacd9 (cherry-pick) - 96dcadc2fdd111dca90d559f189a30c65394451a (backported) From linux-nfs git tree (git://git.linux-nfs.org/projects/trondmy/linux-nfs.git): - 487790f27df9bb27d3400486bd021dd59edc7589 (cherry-pick) - 5de4815015e550bdd33f39650554325540356f0c (cherry-pick) == Impact == There are several users reporting the same issue when running NFS clients on Precise. Other reports have also been found with the same issue: https://bugzilla.redhat.com/show_bug.cgi?id=811138 == Test Case == According to one of the bug reporters: "Logging into a 12.04 client system with autofs5, LDAP, kerberos authenticated nfs4 mounts. However this is to a server which is running 10.04 (contrary to #4 it seems) In my case the triggering process is gnome-keyring-d." I have no idea. ProblemType: KernelOops DistroRelease: Ubuntu 12.04 Package: linux-image-3.2.0-22-generic 3.2.0-22.35 ProcVersionSignature: Ubuntu 3.2.0-22.35-generic 3.2.14 Uname: Linux 3.2.0-22-generic x86_64 NonfreeKernelModules: fglrx AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.24. Annotation: Your system might become unstable now and might need to be restarted. ApportVersion: 2.0-0ubuntu4 Architecture: amd64 CRDA: Error: command ['iw', 'reg', 'get'] failed with exit code 1: nl80211 not found. Date: Thu Apr 5 14:35:46 2012 Failure: oops HibernationDevice: RESUME=UUID=73ced0d0-9777-4d7c-8841-8bd3c57ec88c InstallationMedia: Ubuntu 11.10 "Oneiric Ocelot" - Release amd64 (20111012) IwConfig: lono wireless extensions. eth2 no wireless extensions. MachineType: Gigabyte Technology Co., Ltd. GA-MA78GM-US2H ProcFB: ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.2.0-22-generic root=UUID=dd826ebd-811d-4f2b-ac6a-5f527aee88cd ro recovery nomodeset PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: kerneloops-daemon 0.12+git20090217-1ubuntu18 RfKill: SourcePackage: linux Title: BUG: unable to handle kernel paging request at ffb8 UpgradeStatus: Upgraded to precise on 2012-03-21 (15 days ago) dmi.bios.date: 10/08/2009 dmi.bios.vendor: Award Software International, Inc. dmi.bios.version: F8 dmi.board.name: GA-MA78GM-US2H dmi.board.vendor: Gigabyte Technology Co., Ltd. dmi.board.version: x.x dmi.chassis.type: 3 dmi.chassis.vendor: Gigabyte Technology Co., Ltd. dmi.modalias: dmi:bvnAwardSoftwareInternational,Inc.:bvrF8:bd10/08/2009:svnGigabyteTechnologyCo.,Ltd.:pnGA-MA78GM-US2H:pvr:rvnGigabyteTechnologyCo.,Ltd.:rnGA-MA78GM-US2H:rvrx.x:cvnGigabyteTechnologyCo.,Ltd.:ct3:cvr: dmi.product.name: GA-MA78GM-US2H dmi.sys.vendor: Gigabyte Technology Co., Ltd. To manage notifications about this bug go to: https://bugs.launchpad.net/linux/+bug/974664/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1034740] Re: 8086:4238 [Lenovo ThinkPad X201] iwlwifi drops connection when using 802.11n
** Project changed: linux => linux (Ubuntu) ** Changed in: linux (Ubuntu) Status: New => Invalid ** No longer affects: linux (Ubuntu) -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1034740 Title: 8086:4238 [Lenovo ThinkPad X201] iwlwifi drops connection when using 802.11n Status in linux package in Ubuntu: Invalid Bug description: Symptoms: After a few minutes, the WiFi connection to my home router first becomes slow (packet loss), then entirely unusable. NetWork manager still shows the connection as up and working. dmesg shows messages like these: Aug 9 06:17:16 thinkpad kernel: [ 5026.531127] iwlwifi :02:00.0: Tx aggrega tion enabled on ra = b0:48:7a:d6:91:50 tid = 6 WORKAROUND: rfkill to disable and enable WiFi, or add: options iwlwifi 11n_disable=1 to /etc/modprobe.d/iwlwifi.conf However, this means that all my network connections will only run in 802.11a/g mode, which is undesirably slow. Other people using MacOS in my place don't observe any issues, so I can rule out the router(s) as the culprits. Hardware: 02:00.0 Network controller: Intel Corporation Centrino Ultimate-N 6300 (rev 35) Routers: TP-Link WR1043ND, WR2543ND using OpenWRT trunk. ProblemType: Bug DistroRelease: Ubuntu 12.04 Package: linux-image-3.2.0-27-generic 3.2.0-27.43 ProcVersionSignature: Ubuntu 3.2.0-27.43-generic 3.2.21 Uname: Linux 3.2.0-27-generic x86_64 AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.24. ApportVersion: 2.0.1-0ubuntu12 Architecture: amd64 ArecordDevices: List of CAPTURE Hardware Devices card 0: Intel [HDA Intel], device 0: CONEXANT Analog [CONEXANT Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC29: alex 2261 F xfce4-volumed /dev/snd/controlC0: alex 2250 F pulseaudio alex 2261 F xfce4-volumed CRDA: Error: [Errno 2] No such file or directory Card0.Amixer.info: Card hw:0 'Intel'/'HDA Intel at 0xf252 irq 44' Mixer name : 'Intel IbexPeak HDMI' Components : 'HDA:14f15069,17aa2155,00100302 HDA:80862804,17aa21b5,0010' Controls : 14 Simple ctrls : 6 Card29.Amixer.info: Card hw:29 'ThinkPadEC'/'ThinkPad Console Audio Control at EC reg 0x30, fw 6QHT33WW-1.14' Mixer name : 'ThinkPad EC 6QHT33WW-1.14' Components : '' Controls : 1 Simple ctrls : 1 Card29.Amixer.values: Simple mixer control 'Console',0 Capabilities: pswitch pswitch-joined penum Playback channels: Mono Mono: Playback [on] Date: Thu Aug 9 12:24:19 2012 HibernationDevice: RESUME=UUID=9fee4cfb-53b9-43d7-8425-1666aff145c4 InstallationMedia: Xubuntu 12.04 LTS "Precise Pangolin" - Release amd64 (20120425) MachineType: LENOVO 3626A14 ProcEnviron: LANGUAGE=en_US:en TERM=xterm PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.2.0-27-generic root=/dev/mapper/hostname-root ro quiet splash vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-3.2.0-27-generic N/A linux-backports-modules-3.2.0-27-generic N/A linux-firmware1.79 SourcePackage: linux StagingDrivers: mei UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 04/26/2012 dmi.bios.vendor: LENOVO dmi.bios.version: 6QET69WW (1.39 ) dmi.board.name: 3626A14 dmi.board.vendor: LENOVO dmi.board.version: Not Available dmi.chassis.asset.tag: No Asset Information dmi.chassis.type: 10 dmi.chassis.vendor: LENOVO dmi.chassis.version: Not Available dmi.modalias: dmi:bvnLENOVO:bvr6QET69WW(1.39):bd04/26/2012:svnLENOVO:pn3626A14:pvrThinkPadX201:rvnLENOVO:rn3626A14:rvrNotAvailable:cvnLENOVO:ct10:cvrNotAvailable: dmi.product.name: 3626A14 dmi.product.version: ThinkPad X201 dmi.sys.vendor: LENOVO To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1034740/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1034740] Re: 8086:4238 [Lenovo ThinkPad X201] iwlwifi drops connection when using 802.11n
** No longer affects: linux (Ubuntu) ** Package changed: fedora => linux (Ubuntu) ** Changed in: linux (Ubuntu) Importance: Medium => Undecided ** Changed in: linux (Ubuntu) Status: Fix Released => New ** Changed in: linux (Ubuntu) Remote watch: Red Hat Bugzilla #785239 => None ** No longer affects: linux (Ubuntu) -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1034740 Title: 8086:4238 [Lenovo ThinkPad X201] iwlwifi drops connection when using 802.11n Status in linux package in Ubuntu: Invalid Bug description: Symptoms: After a few minutes, the WiFi connection to my home router first becomes slow (packet loss), then entirely unusable. NetWork manager still shows the connection as up and working. dmesg shows messages like these: Aug 9 06:17:16 thinkpad kernel: [ 5026.531127] iwlwifi :02:00.0: Tx aggrega tion enabled on ra = b0:48:7a:d6:91:50 tid = 6 WORKAROUND: rfkill to disable and enable WiFi, or add: options iwlwifi 11n_disable=1 to /etc/modprobe.d/iwlwifi.conf However, this means that all my network connections will only run in 802.11a/g mode, which is undesirably slow. Other people using MacOS in my place don't observe any issues, so I can rule out the router(s) as the culprits. Hardware: 02:00.0 Network controller: Intel Corporation Centrino Ultimate-N 6300 (rev 35) Routers: TP-Link WR1043ND, WR2543ND using OpenWRT trunk. ProblemType: Bug DistroRelease: Ubuntu 12.04 Package: linux-image-3.2.0-27-generic 3.2.0-27.43 ProcVersionSignature: Ubuntu 3.2.0-27.43-generic 3.2.21 Uname: Linux 3.2.0-27-generic x86_64 AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.24. ApportVersion: 2.0.1-0ubuntu12 Architecture: amd64 ArecordDevices: List of CAPTURE Hardware Devices card 0: Intel [HDA Intel], device 0: CONEXANT Analog [CONEXANT Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC29: alex 2261 F xfce4-volumed /dev/snd/controlC0: alex 2250 F pulseaudio alex 2261 F xfce4-volumed CRDA: Error: [Errno 2] No such file or directory Card0.Amixer.info: Card hw:0 'Intel'/'HDA Intel at 0xf252 irq 44' Mixer name : 'Intel IbexPeak HDMI' Components : 'HDA:14f15069,17aa2155,00100302 HDA:80862804,17aa21b5,0010' Controls : 14 Simple ctrls : 6 Card29.Amixer.info: Card hw:29 'ThinkPadEC'/'ThinkPad Console Audio Control at EC reg 0x30, fw 6QHT33WW-1.14' Mixer name : 'ThinkPad EC 6QHT33WW-1.14' Components : '' Controls : 1 Simple ctrls : 1 Card29.Amixer.values: Simple mixer control 'Console',0 Capabilities: pswitch pswitch-joined penum Playback channels: Mono Mono: Playback [on] Date: Thu Aug 9 12:24:19 2012 HibernationDevice: RESUME=UUID=9fee4cfb-53b9-43d7-8425-1666aff145c4 InstallationMedia: Xubuntu 12.04 LTS "Precise Pangolin" - Release amd64 (20120425) MachineType: LENOVO 3626A14 ProcEnviron: LANGUAGE=en_US:en TERM=xterm PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.2.0-27-generic root=/dev/mapper/hostname-root ro quiet splash vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-3.2.0-27-generic N/A linux-backports-modules-3.2.0-27-generic N/A linux-firmware1.79 SourcePackage: linux StagingDrivers: mei UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 04/26/2012 dmi.bios.vendor: LENOVO dmi.bios.version: 6QET69WW (1.39 ) dmi.board.name: 3626A14 dmi.board.vendor: LENOVO dmi.board.version: Not Available dmi.chassis.asset.tag: No Asset Information dmi.chassis.type: 10 dmi.chassis.vendor: LENOVO dmi.chassis.version: Not Available dmi.modalias: dmi:bvnLENOVO:bvr6QET69WW(1.39):bd04/26/2012:svnLENOVO:pn3626A14:pvrThinkPadX201:rvnLENOVO:rn3626A14:rvrNotAvailable:cvnLENOVO:ct10:cvrNotAvailable: dmi.product.name: 3626A14 dmi.product.version: ThinkPad X201 dmi.sys.vendor: LENOVO To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1034740/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1034740] Re: 8086:4238 [Lenovo ThinkPad X201] iwlwifi drops connection when using 802.11n
Status changed to 'Confirmed' because the bug affects multiple users. ** Changed in: linux (Ubuntu) Status: New => Confirmed -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1034740 Title: 8086:4238 [Lenovo ThinkPad X201] iwlwifi drops connection when using 802.11n Status in linux package in Ubuntu: Invalid Bug description: Symptoms: After a few minutes, the WiFi connection to my home router first becomes slow (packet loss), then entirely unusable. NetWork manager still shows the connection as up and working. dmesg shows messages like these: Aug 9 06:17:16 thinkpad kernel: [ 5026.531127] iwlwifi :02:00.0: Tx aggrega tion enabled on ra = b0:48:7a:d6:91:50 tid = 6 WORKAROUND: rfkill to disable and enable WiFi, or add: options iwlwifi 11n_disable=1 to /etc/modprobe.d/iwlwifi.conf However, this means that all my network connections will only run in 802.11a/g mode, which is undesirably slow. Other people using MacOS in my place don't observe any issues, so I can rule out the router(s) as the culprits. Hardware: 02:00.0 Network controller: Intel Corporation Centrino Ultimate-N 6300 (rev 35) Routers: TP-Link WR1043ND, WR2543ND using OpenWRT trunk. ProblemType: Bug DistroRelease: Ubuntu 12.04 Package: linux-image-3.2.0-27-generic 3.2.0-27.43 ProcVersionSignature: Ubuntu 3.2.0-27.43-generic 3.2.21 Uname: Linux 3.2.0-27-generic x86_64 AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.24. ApportVersion: 2.0.1-0ubuntu12 Architecture: amd64 ArecordDevices: List of CAPTURE Hardware Devices card 0: Intel [HDA Intel], device 0: CONEXANT Analog [CONEXANT Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC29: alex 2261 F xfce4-volumed /dev/snd/controlC0: alex 2250 F pulseaudio alex 2261 F xfce4-volumed CRDA: Error: [Errno 2] No such file or directory Card0.Amixer.info: Card hw:0 'Intel'/'HDA Intel at 0xf252 irq 44' Mixer name : 'Intel IbexPeak HDMI' Components : 'HDA:14f15069,17aa2155,00100302 HDA:80862804,17aa21b5,0010' Controls : 14 Simple ctrls : 6 Card29.Amixer.info: Card hw:29 'ThinkPadEC'/'ThinkPad Console Audio Control at EC reg 0x30, fw 6QHT33WW-1.14' Mixer name : 'ThinkPad EC 6QHT33WW-1.14' Components : '' Controls : 1 Simple ctrls : 1 Card29.Amixer.values: Simple mixer control 'Console',0 Capabilities: pswitch pswitch-joined penum Playback channels: Mono Mono: Playback [on] Date: Thu Aug 9 12:24:19 2012 HibernationDevice: RESUME=UUID=9fee4cfb-53b9-43d7-8425-1666aff145c4 InstallationMedia: Xubuntu 12.04 LTS "Precise Pangolin" - Release amd64 (20120425) MachineType: LENOVO 3626A14 ProcEnviron: LANGUAGE=en_US:en TERM=xterm PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.2.0-27-generic root=/dev/mapper/hostname-root ro quiet splash vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-3.2.0-27-generic N/A linux-backports-modules-3.2.0-27-generic N/A linux-firmware1.79 SourcePackage: linux StagingDrivers: mei UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 04/26/2012 dmi.bios.vendor: LENOVO dmi.bios.version: 6QET69WW (1.39 ) dmi.board.name: 3626A14 dmi.board.vendor: LENOVO dmi.board.version: Not Available dmi.chassis.asset.tag: No Asset Information dmi.chassis.type: 10 dmi.chassis.vendor: LENOVO dmi.chassis.version: Not Available dmi.modalias: dmi:bvnLENOVO:bvr6QET69WW(1.39):bd04/26/2012:svnLENOVO:pn3626A14:pvrThinkPadX201:rvnLENOVO:rn3626A14:rvrNotAvailable:cvnLENOVO:ct10:cvrNotAvailable: dmi.product.name: 3626A14 dmi.product.version: ThinkPad X201 dmi.sys.vendor: LENOVO To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1034740/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1070773] Re: 1002:7188 system hangs on boot (at loading radeon related modules)
** No longer affects: linux (Fedora) -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1070773 Title: 1002:7188 system hangs on boot (at loading radeon related modules) Status in linux package in Ubuntu: Fix Released Bug description: After an upgrade to Ubuntu 12.10 (kernel 3.5), the system fails to boot. When starting without "quiet splash" options, the last kernel messages relate to loading and initializing radeon and drm modules. Same problems are here when trying to boot 12.10 live usb images, both 32- and 64-bit. I'm currently using 3.2 kernel from Precise, which boots fine. According to RH bug report comment, the problem was introduced with an upstream merge commit: f9369910a6225b8d4892c3f20ae740a711cd5ace Ubuntu kernel 3.4.0-5.11 boots fine, 3.5.0-1.1 freezes. WORKAROUND: When using the following kernel boot parameter the system boots but doesn't switch to the native resolution of 1280x800, and leaves it as 1024x768: nomodeset ProblemType: Bug DistroRelease: Ubuntu 12.10 Package: linux-image-3.5.0-17-generic 3.5.0-17.28 ProcVersionSignature: Ubuntu 3.2.0-32.51-generic 3.2.30 Uname: Linux 3.2.0-32-generic i686 ApportVersion: 2.6.1-0ubuntu3 Architecture: i386 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: keplicz4275 F pulseaudio Date: Wed Oct 24 12:34:20 2012 HibernationDevice: RESUME=UUID=3a2133a7-9acb-4a14-a4f8-2dd1a8b1e412 MachineType: Hewlett-Packard HP Compaq 6910p ProcEnviron: LANGUAGE= TERM=xterm PATH=(custom, no user) LANG=pl_PL.UTF-8 SHELL=/bin/bash ProcFB: 0 radeondrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.2.0-32-generic root=UUID=b1aade02-95c2-4d36-8878-027b70c9ec46 ro quiet splash vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-3.2.0-32-generic N/A linux-backports-modules-3.2.0-32-generic N/A linux-firmware1.95 RfKill: Error: [Errno 2] No such file or directory: 'rfkill' SourcePackage: linux UpgradeStatus: Upgraded to quantal on 2012-10-21 (2 days ago) dmi.bios.date: 09/13/2007 dmi.bios.vendor: Hewlett-Packard dmi.bios.version: 68MCD Ver. F.0A dmi.board.name: 30C1 dmi.board.vendor: Hewlett-Packard dmi.board.version: KBC Version 68.32 dmi.chassis.type: 10 dmi.chassis.vendor: Hewlett-Packard dmi.modalias: dmi:bvnHewlett-Packard:bvr68MCDVer.F.0A:bd09/13/2007:svnHewlett-Packard:pnHPCompaq6910p:pvrF.0A:rvnHewlett-Packard:rn30C1:rvrKBCVersion68.32:cvnHewlett-Packard:ct10:cvr: dmi.product.name: HP Compaq 6910p dmi.product.version: F.0A dmi.sys.vendor: Hewlett-Packard To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1070773/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1075478] Re: [HP EliteBook 8530w] Bluetooth keyboards and mice not working after suspend/resume
OR using EOL release, no logs, and no response for years. ** No longer affects: linux (Ubuntu) ** Project changed: evdev => linux (Ubuntu) ** Changed in: linux (Ubuntu) Status: Won't Fix => New ** Changed in: linux (Ubuntu) Remote watch: Red Hat Bugzilla #811534 => None ** No longer affects: linux (Ubuntu) ** Project changed: linux => linux (Ubuntu) ** Changed in: linux (Ubuntu) Importance: Medium => Undecided ** Changed in: linux (Ubuntu) Status: Confirmed => New ** Changed in: linux (Ubuntu) Remote watch: Linux Kernel Bug Tracker #52471 => None ** Changed in: linux (Ubuntu) Status: New => Invalid -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1075478 Title: [HP EliteBook 8530w] Bluetooth keyboards and mice not working after suspend/resume Status in linux package in Ubuntu: Invalid Bug description: After upgrading to Ubuntu 12.10 I encountered the following problem: I have my apple wireless bluetooth keyboard paired up to Ubuntu, and it works fine when I boot up my laptop (HP EliteBook 8530w) as soon as I hit the login screen. However, if I then suspend and resume my laptop again, the bluetooth keyboard does not respond anymore. According to the bluetooth GUI applet it is still succesfully paired up and connected, and I see the green light on my keyboard blinking a few times when I hit a key for the first time after resume which is also the case when it _does_ work, but I get no response whatsoever from Ubuntu when typing on my keyboard. "sudo service bluetooth restart" does not work. Please let me know what additional information to provide. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1075478/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1173997] [NEW] [HP 6730b] Fan at full speed after suspend
You have been subscribed to a public bug: After upgrading to 13.04 the fan of my HP 6730b runs at full speed when resuming after suspend. Before the suspend everything is ok. Workaround is to boot with the old kernel from 12.10 (3.5.0-27). I also tried mainline build 3.8.9-030809. Problem occurs there as well. --- ApportVersion: 2.9.2-0ubuntu8 Architecture: i386 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: mnl2949 F pulseaudio CRDA: country DE: (2400 - 2483 @ 40), (N/A, 20) (5150 - 5250 @ 40), (N/A, 20), NO-OUTDOOR (5250 - 5350 @ 40), (N/A, 20), NO-OUTDOOR, DFS (5470 - 5725 @ 40), (N/A, 26), DFS DistroRelease: Ubuntu 13.04 HibernationDevice: RESUME=UUID=86292e17-edd2-4a1b-8e1b-5208a1731140 InstallationDate: Installed on 2010-11-10 (900 days ago) InstallationMedia: Ubuntu 10.10 "Maverick Meerkat" - Release i386 (20101007) MachineType: Hewlett-Packard HP Compaq 6730b (GB990EA#ABD) MarkForUpload: True Package: linux (not installed) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.8.0-19-generic root=UUID=cff10fb4-08a2-459b-be12-80698b20d2d3 ro quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 3.8.0-19.29-generic 3.8.8 RelatedPackageVersions: linux-restricted-modules-3.8.0-19-generic N/A linux-backports-modules-3.8.0-19-generic N/A linux-firmware1.106 Tags: raring Uname: Linux 3.8.0-19-generic i686 UpgradeStatus: Upgraded to raring on 2013-04-28 (0 days ago) UserGroups: adm admin cdrom dialout libvirtd lpadmin plugdev sambashare voice wireshark dmi.bios.date: 12/07/2011 dmi.bios.vendor: Hewlett-Packard dmi.bios.version: 68PDD Ver. F.20 dmi.board.name: 30DD dmi.board.vendor: Hewlett-Packard dmi.board.version: KBC Version 96.23 dmi.chassis.asset.tag: CNU9326SJY dmi.chassis.type: 10 dmi.chassis.vendor: Hewlett-Packard dmi.modalias: dmi:bvnHewlett-Packard:bvr68PDDVer.F.20:bd12/07/2011:svnHewlett-Packard:pnHPCompaq6730b(GB990EA#ABD):pvrF.20:rvnHewlett-Packard:rn30DD:rvrKBCVersion96.23:cvnHewlett-Packard:ct10:cvr: dmi.product.name: HP Compaq 6730b (GB990EA#ABD) dmi.product.version: F.20 dmi.sys.vendor: Hewlett-Packard ** Affects: linux (Ubuntu) Importance: Undecided Status: New ** Tags: apport-collected kernel-fixed-upstream linux-therm needs-full-computer-model raring regression-release resume -- [HP 6730b] Fan at full speed after suspend https://bugs.launchpad.net/bugs/1173997 You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 913272] [NEW] drm:intel_dsm_platform_mux_info] *ERROR* MUX INFO call failed
You have been subscribed to a public bug: drm:intel_dsm_platform_mux_info] *ERROR* MUX INFO call failed. Unable to install latest version Unbuntu 11.10 ** Affects: linux (Ubuntu) Importance: Undecided Status: New ** Tags: needs-kernel-logs precise -- drm:intel_dsm_platform_mux_info] *ERROR* MUX INFO call failed https://bugs.launchpad.net/bugs/913272 You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 935778] Re: Toshiba Tecra R840 - brightness controls work on first boot, but do nothing after suspend/resume
Patches addressing this issue for various models was released upstream in 2016. ** No longer affects: linux (Ubuntu) ** Package changed: opensuse => linux (Ubuntu) ** Changed in: linux (Ubuntu) Importance: Medium => Undecided ** Changed in: linux (Ubuntu) Status: Won't Fix => New ** Changed in: linux (Ubuntu) Remote watch: Novell/SUSE Bugzilla #711339 => None ** No longer affects: linux (Ubuntu) ** Package changed: fedora => ubuntu ** Changed in: ubuntu Status: Won't Fix => New ** Changed in: ubuntu Remote watch: Red Hat Bugzilla #755768 => None ** No longer affects: ubuntu ** Package changed: debian => linux (Ubuntu) ** Changed in: linux (Ubuntu) Importance: Unknown => Undecided ** Changed in: linux (Ubuntu) Status: Confirmed => New ** Changed in: linux (Ubuntu) Remote watch: Debian Bug tracker #599768 => None ** No longer affects: linux (Ubuntu) ** Project changed: linux => linux (Ubuntu) ** Changed in: linux (Ubuntu) Importance: Medium => Undecided ** Changed in: linux (Ubuntu) Status: Confirmed => New ** Changed in: linux (Ubuntu) Remote watch: Linux Kernel Bug Tracker #21012 => None ** Changed in: linux (Ubuntu) Status: New => Invalid -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/935778 Title: Toshiba Tecra R840 - brightness controls work on first boot, but do nothing after suspend/resume Status in linux package in Ubuntu: Invalid Bug description: Overview - This bug affects many Toshiba laptops including R700, R705, R800, R830, R835, R840, R850, Z930 models - please update this description if your model is also affected, but make sure the symptoms match exactly. The symptoms are that brightness control operates normally when the system is first booted, but after a suspend-to-RAM and resume cycle the brightness controls have no effect. After a normal reboot, or hibernate & resume cycle, the brightness controls operate normally again. This bug is tracked for the kernel at: http://bugzilla.kernel.org/show_bug.cgi?id=21012 And for Debian at: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=599768 Please try to keep all info together and pass any progress to the upstream trackers. Original report for #935778 follows: On my Toshiba R840, the brightness controls work fine on first boot, but do nothing after suspend/resume. This is particularly frustrating if I suspend with the screen at all dimmed, because once I resume, I have no way of increasing the brightness short of a reboot. ProblemType: Bug DistroRelease: Ubuntu 12.04 Package: linux-image-generic 3.2.0.16.16 ProcVersionSignature: Ubuntu 3.2.0-16.25-generic 3.2.6 Uname: Linux 3.2.0-16-generic x86_64 AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.24. ApportVersion: 1.91-0ubuntu1 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: james 2251 F pulseaudio /dev/snd/pcmC0D0p: james 2251 F...m pulseaudio CRDA: country EU: (2402 - 2482 @ 40), (N/A, 20) (5170 - 5250 @ 40), (N/A, 20) (5250 - 5330 @ 40), (N/A, 20), DFS (5490 - 5710 @ 40), (N/A, 27), DFS Card0.Amixer.info: Card hw:0 'PCH'/'HDA Intel PCH at 0xc482 irq 50' Mixer name : 'Intel CougarPoint HDMI' Components : 'HDA:10ec0269,1179062a,00100100 HDA:80862805,11790001,0010' Controls : 30 Simple ctrls : 12 Date: Sat Feb 18 21:27:12 2012 EcryptfsInUse: Yes InstallationMedia: Ubuntu 11.10 "Oneiric Ocelot" - Release amd64 (20111012) MachineType: TOSHIBA TECRA R840 ProcEnviron: LANGUAGE=en_GB:en PATH=(custom, no user) LANG=en_GB.UTF-8 SHELL=/bin/bash ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.2.0-16-generic root=UUID=16b08eff-30c4-4fe0-bede-cf8cb31270bf ro quiet splash vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-3.2.0-16-generic N/A linux-backports-modules-3.2.0-16-generic N/A linux-firmware1.69 RfKill: 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no SourcePackage: linux StagingDrivers: mei UpgradeStatus: Upgraded to precise on 2012-01-09 (39 days ago) dmi.bios.date: 07/12/2011 dmi.bios.vendor: TOSHIBA dmi.bios.version: Version 2.90 dmi.board.asset.tag: 00 dmi.board.name: Portable PC dmi.board.vendor: TOSHIBA dmi.board.version: Version A0 dmi.chassis.asset.tag: 00 dmi.chassis.type: 10 dmi.chassis.vendor: TOSHIBA dmi.chassis.version: Version 1.0 dmi.modalias: dmi:bvnTOSHIBA:bvrVersion2.90:bd07/12/2011:svnTOSHIBA:pnTECRAR840:pvrPT42GE-00N006EN:rvnTOSHIBA:rnPortablePC:rvrVersionA0:cvnTOSHIBA:ct10:cvrVersion1.0: dmi.product.name: TECRA R840 dmi.product.version: PT42GE-00N006EN dmi.sys.vendor: TOSHIBA To manage notifications about this bug go to:
[Kernel-packages] [Bug 940267] Re: USB keyboard and mouse can't be used after shutdown and power on
OR using EOL release, and no response for years. ** No longer affects: linux (Ubuntu) ** Package changed: linux (Fedora) => linux (Ubuntu) ** Changed in: linux (Ubuntu) Importance: High => Undecided ** Changed in: linux (Ubuntu) Status: Expired => New ** Changed in: linux (Ubuntu) Remote watch: Red Hat Bugzilla #784999 => None ** Changed in: linux (Ubuntu) Status: New => Invalid -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/940267 Title: USB keyboard and mouse can't be used after shutdown and power on Status in linux package in Ubuntu: Invalid Bug description: I initially reported this bug in Ubuntu 11.04 (https://bugs.launchpad.net/ubuntu/+source/linux/+bug/786272). Maybe somebody can reactivate bug #786272... --- If I shutdown 11.10 the computer finally turns off. But the mouse light sometimes remains lit. If I turn on the computer again, the BIOS does not recognize my USB keyboard and mouse. I saw that the three LEDs on the keyboard were blinking. As a result, no OS is able to initialize and use the keyboard and mouse. I have to unplug the power chord and wait until the power supply is discharged or unplug the keyboard and mouse. Then the mouse and keyboard functions completely ok. This bug also exists in Fedora 16 >3.1.7 kernels. 3.1.7 worked well for me. ProblemType: Bug DistroRelease: Ubuntu 11.10 Package: linux-image-3.0.0-16-generic 3.0.0-16.28 ProcVersionSignature: Ubuntu 3.0.0-16.28-generic 3.0.17 Uname: Linux 3.0.0-16-generic x86_64 NonfreeKernelModules: fglrx AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.24. ApportVersion: 1.23-0ubuntu4 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: andreas1741 F pulseaudio /dev/snd/pcmC1D0p: andreas1741 F...m pulseaudio CRDA: Error: [Errno 2] Datei oder Verzeichnis nicht gefunden Card0.Amixer.info: Card hw:0 'NVidia'/'HDA NVidia at 0xfe9f irq 21' Mixer name : 'Realtek ALC883' Components : 'HDA:10ec0883,14627250,0012' Controls : 38 Simple ctrls : 21 Card1.Amixer.info: Card hw:1 'Speaker'/'Logitech Z-10 USB Speaker at usb-:00:02.0-8, full speed' Mixer name : 'USB Mixer' Components : 'USB046d:0a07' Controls : 4 Simple ctrls : 3 Card2.Amixer.info: Card hw:2 'Generic'/'HD-Audio Generic at 0xfebbc000 irq 46' Mixer name : 'ATI R6xx HDMI' Components : 'HDA:1002aa01,00aa0100,00100200' Controls : 4 Simple ctrls : 1 Card2.Amixer.values: Simple mixer control 'IEC958',0 Capabilities: pswitch pswitch-joined penum Playback channels: Mono Mono: Playback [on] Date: Fri Feb 24 13:19:30 2012 HibernationDevice: RESUME=UUID=9c426c7c-f334-489f-a9c3-9bfb53647e84 InstallationMedia: Ubuntu 11.10 "Oneiric Ocelot" - Release amd64 (20111012) IwConfig: lono wireless extensions. eth0 no wireless extensions. eth1 no wireless extensions. MachineType: MSI MS-7250 ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.0.0-16-generic root=UUID=b1dc87e2-d4df-455b-a81c-5f5a3f3f05bc ro rootflags=subvol=@ quiet splash vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-3.0.0-16-generic N/A linux-backports-modules-3.0.0-16-generic N/A linux-firmware1.60 RfKill: SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 04/07/2008 dmi.bios.vendor: MS-7250 dmi.bios.version: V1.11 dmi.board.asset.tag: To Be Filled By O.E.M. dmi.board.name: MS-7250 dmi.board.vendor: MSI dmi.board.version: 1.0 dmi.chassis.asset.tag: To Be Filled By O.E.M. dmi.chassis.type: 3 dmi.chassis.vendor: To Be Filled By O.E.M. dmi.chassis.version: To Be Filled By O.E.M. dmi.modalias: dmi:bvnMS-7250:bvrV1.11:bd04/07/2008:svnMSI:pnMS-7250:pvr1.0:rvnMSI:rnMS-7250:rvr1.0:cvnToBeFilledByO.E.M.:ct3:cvrToBeFilledByO.E.M.: dmi.product.name: MS-7250 dmi.product.version: 1.0 dmi.sys.vendor: MSI To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/940267/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1075478] [NEW] [HP EliteBook 8530w] Bluetooth keyboards and mice not working after suspend/resume
You have been subscribed to a public bug: After upgrading to Ubuntu 12.10 I encountered the following problem: I have my apple wireless bluetooth keyboard paired up to Ubuntu, and it works fine when I boot up my laptop (HP EliteBook 8530w) as soon as I hit the login screen. However, if I then suspend and resume my laptop again, the bluetooth keyboard does not respond anymore. According to the bluetooth GUI applet it is still succesfully paired up and connected, and I see the green light on my keyboard blinking a few times when I hit a key for the first time after resume which is also the case when it _does_ work, but I get no response whatsoever from Ubuntu when typing on my keyboard. "sudo service bluetooth restart" does not work. Please let me know what additional information to provide. ** Affects: linux (Ubuntu) Importance: Undecided Status: New ** Tags: bluetooth bot-comment kernel-da-key keyboard needs-kernel-logs resume suspend -- [HP EliteBook 8530w] Bluetooth keyboards and mice not working after suspend/resume https://bugs.launchpad.net/bugs/1075478 You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1075478] [NEW] [HP EliteBook 8530w] Bluetooth keyboards and mice not working after suspend/resume
You have been subscribed to a public bug: After upgrading to Ubuntu 12.10 I encountered the following problem: I have my apple wireless bluetooth keyboard paired up to Ubuntu, and it works fine when I boot up my laptop (HP EliteBook 8530w) as soon as I hit the login screen. However, if I then suspend and resume my laptop again, the bluetooth keyboard does not respond anymore. According to the bluetooth GUI applet it is still succesfully paired up and connected, and I see the green light on my keyboard blinking a few times when I hit a key for the first time after resume which is also the case when it _does_ work, but I get no response whatsoever from Ubuntu when typing on my keyboard. "sudo service bluetooth restart" does not work. Please let me know what additional information to provide. ** Affects: linux (Ubuntu) Importance: Undecided Status: New ** Affects: linux Importance: Medium Status: Confirmed ** Tags: bluetooth bot-comment kernel-da-key keyboard needs-kernel-logs resume suspend -- [HP EliteBook 8530w] Bluetooth keyboards and mice not working after suspend/resume https://bugs.launchpad.net/bugs/1075478 You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 886820] [NEW] [Kubuntu 11.10] Screen brightness control does not work on Samsung RV511 laptop
You have been subscribed to a public bug: The Fn keys does show the brightness indicator, but the brightness itself is not changed. The brightness regulator in the power applet in the notification area does not work either. lspci 00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 02) 00:01.0 PCI bridge: Intel Corporation Core Processor PCI Express x16 Root Port (rev 02) 00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06) 00:1a.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05) 00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 05) 00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 05) 00:1c.3 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 4 (rev 05) 00:1d.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a5) 00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 05) 00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA AHCI Controller (rev 05) 00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 05) 00:1f.6 Signal processing controller: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem (rev 05) 02:00.0 VGA compatible controller: nVidia Corporation Device 0a7a (rev a2) 02:00.1 Audio device: nVidia Corporation High Definition Audio Controller (rev a1) 03:00.0 Network controller: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller (rev 01) 05:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06) 3f:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 02) 3f:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 02) 3f:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 02) 3f:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 02) 3f:02.2 Host bridge: Intel Corporation Core Processor Reserved (rev 02) 3f:02.3 Host bridge: Intel Corporation Core Processor Reserved (rev 02) lspci -n 00:00.0 0600: 8086:0044 (rev 02) 00:01.0 0604: 8086:0045 (rev 02) 00:16.0 0780: 8086:3b64 (rev 06) 00:1a.0 0c03: 8086:3b3c (rev 05) 00:1b.0 0403: 8086:3b56 (rev 05) 00:1c.0 0604: 8086:3b42 (rev 05) 00:1c.3 0604: 8086:3b48 (rev 05) 00:1d.0 0c03: 8086:3b34 (rev 05) 00:1e.0 0604: 8086:2448 (rev a5) 00:1f.0 0601: 8086:3b09 (rev 05) 00:1f.2 0106: 8086:3b29 (rev 05) 00:1f.3 0c05: 8086:3b30 (rev 05) 00:1f.6 1180: 8086:3b32 (rev 05) 02:00.0 0300: 10de:0a7a (rev a2) 02:00.1 0403: 10de:0be3 (rev a1) 03:00.0 0280: 14e4:4727 (rev 01) 05:00.0 0200: 10ec:8168 (rev 06) 3f:00.0 0600: 8086:2c62 (rev 02) 3f:00.1 0600: 8086:2d01 (rev 02) 3f:02.0 0600: 8086:2d10 (rev 02) 3f:02.1 0600: 8086:2d11 (rev 02) 3f:02.2 0600: 8086:2d12 (rev 02) 3f:02.3 0600: 8086:2d13 (rev 02) --- AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.24. ApportVersion: 1.23-0ubuntu4 Architecture: i386 ArecordDevices: List of CAPTURE Hardware Devices card 0: Intel [HDA Intel], device 0: ALC269VB Analog [ALC269VB Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: stetzen1930 F pulseaudio /dev/snd/controlC0: stetzen1930 F pulseaudio CRDA: Error: [Errno 2] No such file or directory Card0.Amixer.info: Card hw:0 'Intel'/'HDA Intel at 0xfc80 irq 43' Mixer name : 'Realtek ALC269VB' Components : 'HDA:10ec0269,144dc581,00100100' Controls : 15 Simple ctrls : 10 Card1.Amixer.info: Card hw:1 'NVidia'/'HDA NVidia at 0xddefc000 irq 17' Mixer name : 'Nvidia GPU 0b HDMI/DP' Components : 'HDA:10de000b,10de0101,00100200' Controls : 16 Simple ctrls : 4 DistroRelease: Ubuntu 11.10 HibernationDevice: RESUME=UUID=36180a3f-7e23-0aef-edb8-a90176900ecd InstallationMedia: Kubuntu 11.10 "Oneiric Ocelot" - Release i386 (20111012) MachineType: SAMSUNG ELECTRONICS CO., LTD. RV411/RV511/E3511/S3511 NonfreeKernelModules: nvidia wl Package: linux (not installed) ProcEnviron: LANGUAGE=en_GB:en LANG=en_GB.UTF-8 SHELL=/bin/bash ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.0.0-12-generic-pae root=UUID=ad954864-2a64-4185-9262-b45aa1ef5427 ro quiet acpi_backlight=vendor acpi_osi=Linux acpi_brightness=vendor splash vt.handoff=7 ProcVersionSignature: Ubuntu 3.0.0-12.21~ppa4~loms~oneiric-generic-pae 3.0.4
[Kernel-packages] [Bug 652775] [NEW] WARNING: at /build/buildd/linux-2.6.35/include/net/mac80211.h:2601 rate_control_send_low+0xc2/0x140 [mac80211]()
You have been subscribed to a public bug: Seems to be not critical... ProblemType: KernelOops DistroRelease: Ubuntu 10.10 Package: linux-image-2.6.35-22-generic-pae 2.6.35-22.33 Regression: Yes Reproducible: No ProcVersionSignature: Ubuntu 2.6.35-22.33-generic-pae 2.6.35.4 Uname: Linux 2.6.35-22-generic-pae i686 NonfreeKernelModules: nvidia AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.23. Annotation: Your system might become unstable now and might need to be restarted. Architecture: i386 ArecordDevices: List of CAPTURE Hardware Devices card 0: Intel [HDA Intel], device 0: CONEXANT Analog [CONEXANT Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: kgeorgy1734 F pulseaudio CRDA: Error: [Errno 2] Aucun fichier ou dossier de ce type Card0.Amixer.info: Card hw:0 'Intel'/'HDA Intel at 0xf232 irq 47' Mixer name : 'Conexant CX20585' Components : 'HDA:14f15069,17aa21a4,00100302' Controls : 6 Simple ctrls : 4 Card1.Amixer.info: Card hw:1 'NVidia'/'HDA NVidia at 0xcdefc000 irq 16' Mixer name : 'Nvidia GT21x HDMI' Components : 'HDA:10de000b,10de0101,00100100' Controls : 16 Simple ctrls : 4 Card29.Amixer.info: Card hw:29 'ThinkPadEC'/'ThinkPad Console Audio Control at EC reg 0x30, fw 6UHT27WW-1.08' Mixer name : 'ThinkPad EC 6UHT27WW-1.08' Components : '' Controls : 1 Simple ctrls : 1 Card29.Amixer.values: Simple mixer control 'Console',0 Capabilities: pswitch pswitch-joined penum Playback channels: Mono Mono: Playback [on] Date: Fri Oct 1 09:42:48 2010 Failure: oops Frequency: Once a day. HibernationDevice: RESUME=UUID=0bc3930d-795a-4add-9dde-1318f3c643a0 InstallationMedia: Ubuntu 10.10 "Maverick Meerkat" - Beta i386 (20100901.1) MachineType: LENOVO 2912AE7 ProcCmdLine: BOOT_IMAGE=/boot/vmlinuz-2.6.35-22-generic-pae root=UUID=c413cbec-ba7a-4200-bb78-b6e35569868f ro quiet splash RelatedPackageVersions: linux-firmware 1.38 SourcePackage: linux Title: WARNING: at /build/buildd/linux-2.6.35/include/net/mac80211.h:2601 rate_control_send_low+0xc2/0x140 [mac80211]() dmi.bios.date: 03/25/2010 dmi.bios.vendor: LENOVO dmi.bios.version: 6UET33WW (1.11 ) dmi.board.name: 2912AE7 dmi.board.vendor: LENOVO dmi.board.version: Not Available dmi.chassis.asset.tag: No Asset Information dmi.chassis.type: 10 dmi.chassis.vendor: LENOVO dmi.chassis.version: Not Available dmi.modalias: dmi:bvnLENOVO:bvr6UET33WW(1.11):bd03/25/2010:svnLENOVO:pn2912AE7:pvrThinkPadT410s:rvnLENOVO:rn2912AE7:rvrNotAvailable:cvnLENOVO:ct10:cvrNotAvailable: dmi.product.name: 2912AE7 dmi.product.version: ThinkPad T410s dmi.sys.vendor: LENOVO ** Affects: linux (Ubuntu) Importance: Undecided Status: New ** Tags: apport-kerneloops i386 kernel-oops maverick needs-upstream-testing -- WARNING: at /build/buildd/linux-2.6.35/include/net/mac80211.h:2601 rate_control_send_low+0xc2/0x140 [mac80211]() https://bugs.launchpad.net/bugs/652775 You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1034740] [NEW] 8086:4238 [Lenovo ThinkPad X201] iwlwifi drops connection when using 802.11n
You have been subscribed to a public bug: Symptoms: After a few minutes, the WiFi connection to my home router first becomes slow (packet loss), then entirely unusable. NetWork manager still shows the connection as up and working. dmesg shows messages like these: Aug 9 06:17:16 thinkpad kernel: [ 5026.531127] iwlwifi :02:00.0: Tx aggrega tion enabled on ra = b0:48:7a:d6:91:50 tid = 6 WORKAROUND: rfkill to disable and enable WiFi, or add: options iwlwifi 11n_disable=1 to /etc/modprobe.d/iwlwifi.conf However, this means that all my network connections will only run in 802.11a/g mode, which is undesirably slow. Other people using MacOS in my place don't observe any issues, so I can rule out the router(s) as the culprits. Hardware: 02:00.0 Network controller: Intel Corporation Centrino Ultimate-N 6300 (rev 35) Routers: TP-Link WR1043ND, WR2543ND using OpenWRT trunk. ProblemType: Bug DistroRelease: Ubuntu 12.04 Package: linux-image-3.2.0-27-generic 3.2.0-27.43 ProcVersionSignature: Ubuntu 3.2.0-27.43-generic 3.2.21 Uname: Linux 3.2.0-27-generic x86_64 AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.24. ApportVersion: 2.0.1-0ubuntu12 Architecture: amd64 ArecordDevices: List of CAPTURE Hardware Devices card 0: Intel [HDA Intel], device 0: CONEXANT Analog [CONEXANT Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC29: alex 2261 F xfce4-volumed /dev/snd/controlC0: alex 2250 F pulseaudio alex 2261 F xfce4-volumed CRDA: Error: [Errno 2] No such file or directory Card0.Amixer.info: Card hw:0 'Intel'/'HDA Intel at 0xf252 irq 44' Mixer name : 'Intel IbexPeak HDMI' Components : 'HDA:14f15069,17aa2155,00100302 HDA:80862804,17aa21b5,0010' Controls : 14 Simple ctrls : 6 Card29.Amixer.info: Card hw:29 'ThinkPadEC'/'ThinkPad Console Audio Control at EC reg 0x30, fw 6QHT33WW-1.14' Mixer name : 'ThinkPad EC 6QHT33WW-1.14' Components : '' Controls : 1 Simple ctrls : 1 Card29.Amixer.values: Simple mixer control 'Console',0 Capabilities: pswitch pswitch-joined penum Playback channels: Mono Mono: Playback [on] Date: Thu Aug 9 12:24:19 2012 HibernationDevice: RESUME=UUID=9fee4cfb-53b9-43d7-8425-1666aff145c4 InstallationMedia: Xubuntu 12.04 LTS "Precise Pangolin" - Release amd64 (20120425) MachineType: LENOVO 3626A14 ProcEnviron: LANGUAGE=en_US:en TERM=xterm PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.2.0-27-generic root=/dev/mapper/hostname-root ro quiet splash vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-3.2.0-27-generic N/A linux-backports-modules-3.2.0-27-generic N/A linux-firmware1.79 SourcePackage: linux StagingDrivers: mei UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 04/26/2012 dmi.bios.vendor: LENOVO dmi.bios.version: 6QET69WW (1.39 ) dmi.board.name: 3626A14 dmi.board.vendor: LENOVO dmi.board.version: Not Available dmi.chassis.asset.tag: No Asset Information dmi.chassis.type: 10 dmi.chassis.vendor: LENOVO dmi.chassis.version: Not Available dmi.modalias: dmi:bvnLENOVO:bvr6QET69WW(1.39):bd04/26/2012:svnLENOVO:pn3626A14:pvrThinkPadX201:rvnLENOVO:rn3626A14:rvrNotAvailable:cvnLENOVO:ct10:cvrNotAvailable: dmi.product.name: 3626A14 dmi.product.version: ThinkPad X201 dmi.sys.vendor: LENOVO ** Affects: linux (Ubuntu) Importance: Undecided Status: Invalid ** Tags: amd64 apport-bug bios-outdated-1.40 needs-upstream-testing needs-wifi-debug precise raring staging -- 8086:4238 [Lenovo ThinkPad X201] iwlwifi drops connection when using 802.11n https://bugs.launchpad.net/bugs/1034740 You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1034740] [NEW] 8086:4238 [Lenovo ThinkPad X201] iwlwifi drops connection when using 802.11n
You have been subscribed to a public bug: Symptoms: After a few minutes, the WiFi connection to my home router first becomes slow (packet loss), then entirely unusable. NetWork manager still shows the connection as up and working. dmesg shows messages like these: Aug 9 06:17:16 thinkpad kernel: [ 5026.531127] iwlwifi :02:00.0: Tx aggrega tion enabled on ra = b0:48:7a:d6:91:50 tid = 6 WORKAROUND: rfkill to disable and enable WiFi, or add: options iwlwifi 11n_disable=1 to /etc/modprobe.d/iwlwifi.conf However, this means that all my network connections will only run in 802.11a/g mode, which is undesirably slow. Other people using MacOS in my place don't observe any issues, so I can rule out the router(s) as the culprits. Hardware: 02:00.0 Network controller: Intel Corporation Centrino Ultimate-N 6300 (rev 35) Routers: TP-Link WR1043ND, WR2543ND using OpenWRT trunk. ProblemType: Bug DistroRelease: Ubuntu 12.04 Package: linux-image-3.2.0-27-generic 3.2.0-27.43 ProcVersionSignature: Ubuntu 3.2.0-27.43-generic 3.2.21 Uname: Linux 3.2.0-27-generic x86_64 AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.24. ApportVersion: 2.0.1-0ubuntu12 Architecture: amd64 ArecordDevices: List of CAPTURE Hardware Devices card 0: Intel [HDA Intel], device 0: CONEXANT Analog [CONEXANT Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC29: alex 2261 F xfce4-volumed /dev/snd/controlC0: alex 2250 F pulseaudio alex 2261 F xfce4-volumed CRDA: Error: [Errno 2] No such file or directory Card0.Amixer.info: Card hw:0 'Intel'/'HDA Intel at 0xf252 irq 44' Mixer name : 'Intel IbexPeak HDMI' Components : 'HDA:14f15069,17aa2155,00100302 HDA:80862804,17aa21b5,0010' Controls : 14 Simple ctrls : 6 Card29.Amixer.info: Card hw:29 'ThinkPadEC'/'ThinkPad Console Audio Control at EC reg 0x30, fw 6QHT33WW-1.14' Mixer name : 'ThinkPad EC 6QHT33WW-1.14' Components : '' Controls : 1 Simple ctrls : 1 Card29.Amixer.values: Simple mixer control 'Console',0 Capabilities: pswitch pswitch-joined penum Playback channels: Mono Mono: Playback [on] Date: Thu Aug 9 12:24:19 2012 HibernationDevice: RESUME=UUID=9fee4cfb-53b9-43d7-8425-1666aff145c4 InstallationMedia: Xubuntu 12.04 LTS "Precise Pangolin" - Release amd64 (20120425) MachineType: LENOVO 3626A14 ProcEnviron: LANGUAGE=en_US:en TERM=xterm PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.2.0-27-generic root=/dev/mapper/hostname-root ro quiet splash vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-3.2.0-27-generic N/A linux-backports-modules-3.2.0-27-generic N/A linux-firmware1.79 SourcePackage: linux StagingDrivers: mei UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 04/26/2012 dmi.bios.vendor: LENOVO dmi.bios.version: 6QET69WW (1.39 ) dmi.board.name: 3626A14 dmi.board.vendor: LENOVO dmi.board.version: Not Available dmi.chassis.asset.tag: No Asset Information dmi.chassis.type: 10 dmi.chassis.vendor: LENOVO dmi.chassis.version: Not Available dmi.modalias: dmi:bvnLENOVO:bvr6QET69WW(1.39):bd04/26/2012:svnLENOVO:pn3626A14:pvrThinkPadX201:rvnLENOVO:rn3626A14:rvrNotAvailable:cvnLENOVO:ct10:cvrNotAvailable: dmi.product.name: 3626A14 dmi.product.version: ThinkPad X201 dmi.sys.vendor: LENOVO ** Affects: linux (Ubuntu) Importance: Undecided Status: Invalid ** Affects: linux (Debian) Importance: Undecided Status: New ** Tags: amd64 apport-bug bios-outdated-1.40 needs-upstream-testing needs-wifi-debug precise raring staging -- 8086:4238 [Lenovo ThinkPad X201] iwlwifi drops connection when using 802.11n https://bugs.launchpad.net/bugs/1034740 You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1034740] [NEW] 8086:4238 [Lenovo ThinkPad X201] iwlwifi drops connection when using 802.11n
You have been subscribed to a public bug: Symptoms: After a few minutes, the WiFi connection to my home router first becomes slow (packet loss), then entirely unusable. NetWork manager still shows the connection as up and working. dmesg shows messages like these: Aug 9 06:17:16 thinkpad kernel: [ 5026.531127] iwlwifi :02:00.0: Tx aggrega tion enabled on ra = b0:48:7a:d6:91:50 tid = 6 WORKAROUND: rfkill to disable and enable WiFi, or add: options iwlwifi 11n_disable=1 to /etc/modprobe.d/iwlwifi.conf However, this means that all my network connections will only run in 802.11a/g mode, which is undesirably slow. Other people using MacOS in my place don't observe any issues, so I can rule out the router(s) as the culprits. Hardware: 02:00.0 Network controller: Intel Corporation Centrino Ultimate-N 6300 (rev 35) Routers: TP-Link WR1043ND, WR2543ND using OpenWRT trunk. ProblemType: Bug DistroRelease: Ubuntu 12.04 Package: linux-image-3.2.0-27-generic 3.2.0-27.43 ProcVersionSignature: Ubuntu 3.2.0-27.43-generic 3.2.21 Uname: Linux 3.2.0-27-generic x86_64 AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.24. ApportVersion: 2.0.1-0ubuntu12 Architecture: amd64 ArecordDevices: List of CAPTURE Hardware Devices card 0: Intel [HDA Intel], device 0: CONEXANT Analog [CONEXANT Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC29: alex 2261 F xfce4-volumed /dev/snd/controlC0: alex 2250 F pulseaudio alex 2261 F xfce4-volumed CRDA: Error: [Errno 2] No such file or directory Card0.Amixer.info: Card hw:0 'Intel'/'HDA Intel at 0xf252 irq 44' Mixer name : 'Intel IbexPeak HDMI' Components : 'HDA:14f15069,17aa2155,00100302 HDA:80862804,17aa21b5,0010' Controls : 14 Simple ctrls : 6 Card29.Amixer.info: Card hw:29 'ThinkPadEC'/'ThinkPad Console Audio Control at EC reg 0x30, fw 6QHT33WW-1.14' Mixer name : 'ThinkPad EC 6QHT33WW-1.14' Components : '' Controls : 1 Simple ctrls : 1 Card29.Amixer.values: Simple mixer control 'Console',0 Capabilities: pswitch pswitch-joined penum Playback channels: Mono Mono: Playback [on] Date: Thu Aug 9 12:24:19 2012 HibernationDevice: RESUME=UUID=9fee4cfb-53b9-43d7-8425-1666aff145c4 InstallationMedia: Xubuntu 12.04 LTS "Precise Pangolin" - Release amd64 (20120425) MachineType: LENOVO 3626A14 ProcEnviron: LANGUAGE=en_US:en TERM=xterm PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.2.0-27-generic root=/dev/mapper/hostname-root ro quiet splash vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-3.2.0-27-generic N/A linux-backports-modules-3.2.0-27-generic N/A linux-firmware1.79 SourcePackage: linux StagingDrivers: mei UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 04/26/2012 dmi.bios.vendor: LENOVO dmi.bios.version: 6QET69WW (1.39 ) dmi.board.name: 3626A14 dmi.board.vendor: LENOVO dmi.board.version: Not Available dmi.chassis.asset.tag: No Asset Information dmi.chassis.type: 10 dmi.chassis.vendor: LENOVO dmi.chassis.version: Not Available dmi.modalias: dmi:bvnLENOVO:bvr6QET69WW(1.39):bd04/26/2012:svnLENOVO:pn3626A14:pvrThinkPadX201:rvnLENOVO:rn3626A14:rvrNotAvailable:cvnLENOVO:ct10:cvrNotAvailable: dmi.product.name: 3626A14 dmi.product.version: ThinkPad X201 dmi.sys.vendor: LENOVO ** Affects: linux Importance: Undecided Status: New ** Affects: linux (Debian) Importance: Undecided Status: New ** Affects: linux (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug bios-outdated-1.40 needs-upstream-testing needs-wifi-debug precise raring staging -- 8086:4238 [Lenovo ThinkPad X201] iwlwifi drops connection when using 802.11n https://bugs.launchpad.net/bugs/1034740 You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 736171] Re: 168c:002a ath: Failed to stop TX DMA in 100 msec after killing last frame
Cristian Aravena Romero, in order to allow additional upstream developers to examine the issue, at your earliest convenience, could you please test the latest upstream kernel available from http://kernel.ubuntu.com/~kernel-ppa/mainline/?C=N;O=D ? Please keep in mind the following: 1) The one to test is at the very top line at the top of the page (not the daily folder). 2) The release names are irrelevant. 3) The folder time stamps aren't indicative of when the kernel actually was released upstream. 4) Install instructions are available at https://wiki.ubuntu.com/Kernel/MainlineBuilds . If testing on your main install would be inconvenient, one may: 1) Install Ubuntu to a different partition and then test this there. 2) Backup, or clone the primary install. If the latest kernel did not allow you to test to the issue (ex. you couldn't boot into the OS) please make a comment in your report about this, and continue to test the next most recent kernel version until you can test to the issue. Once you've tested the upstream kernel, please comment on which kernel version specifically you tested. If this issue is fixed in the mainline kernel, please add the following tags by clicking on the yellow circle with a black pencil icon, next to the word Tags, located at the bottom of the report description: kernel-fixed-upstream kernel-fixed-upstream-X.Y-rcZ Where X, and Y are the first two numbers of the kernel version, and Z is the release candidate number if it exists. If the mainline kernel does not fix the issue, please add the following tags: kernel-bug-exists-upstream kernel-bug-exists-upstream-X.Y-rcZ Please note, an error to install the kernel does not fit the criteria of kernel-bug-exists-upstream. Also, you don't need to apport-collect further unless specifically requested to do so. It is most helpful that after testing of the latest upstream kernel is complete, you mark this report Status Confirmed. Lastly, to keep this issue relevant to upstream, please continue to test the latest mainline kernel as it becomes available. Thank you for your help. ** Changed in: linux (Ubuntu) Importance: Undecided => Low ** Changed in: linux (Ubuntu) Status: Confirmed => Incomplete -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/736171 Title: 168c:002a ath: Failed to stop TX DMA in 100 msec after killing last frame Status in linux package in Ubuntu: Incomplete Bug description: Message in dmesg: [ 22.308381] ath: Failed to stop TX DMA in 100 msec after killing last frame [ 22.308447] ath: Failed to stop TX DMA! --- ApportVersion: 2.12-0ubuntu3 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: caravena 1670 F pulseaudio /dev/snd/controlC1: caravena 1670 F pulseaudio /dev/snd/pcmC1D0p: caravena 1670 F...m pulseaudio CRDA: country CL: (2402 - 2482 @ 40), (N/A, 20) (5170 - 5250 @ 40), (N/A, 20) (5250 - 5330 @ 40), (N/A, 20), DFS (5735 - 5835 @ 40), (N/A, 20) DistroRelease: Ubuntu 13.10 HibernationDevice: RESUME=UUID=360bd2d2-4f44-4311-86d6-4781ac81ee87 InstallationDate: Installed on 2013-07-31 (17 days ago) InstallationMedia: Ubuntu-GNOME 13.10 "Saucy Salamander" - Alpha amd64 (20130724) MachineType: SAMSUNG ELECTRONICS CO., LTD. 530U3C/530U4C MarkForUpload: True Package: linux (not installed) ProcFB: 0 inteldrmfb 1 VESA VGA ProcKernelCmdLine: BOOT_IMAGE=/@/boot/vmlinuz-3.11.0-2-generic root=UUID=0c67119c-ddae-476a-b510-142ec598f691 ro rootflags=subvol=@ quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 3.11.0-2.5-generic 3.11.0-rc5 RelatedPackageVersions: linux-restricted-modules-3.11.0-2-generic N/A linux-backports-modules-3.11.0-2-generic N/A linux-firmware1.113 Tags: saucy Uname: Linux 3.11.0-2-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo dmi.bios.date: 04/15/2013 dmi.bios.vendor: Phoenix Technologies Ltd. dmi.bios.version: P14AAJ dmi.board.asset.tag: Base Board Asset Tag dmi.board.name: SAMSUNG_NP1234567890 dmi.board.vendor: SAMSUNG ELECTRONICS CO., LTD. dmi.board.version: FAB1 dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 9 dmi.chassis.vendor: SAMSUNG ELECTRONICS CO., LTD. dmi.chassis.version: 0.1 dmi.modalias: dmi:bvnPhoenixTechnologiesLtd.:bvrP14AAJ:bd04/15/2013:svnSAMSUNGELECTRONICSCO.,LTD.:pn530U3C/530U4C:pvr0.1:rvnSAMSUNGELECTRONICSCO.,LTD.:rnSAMSUNG_NP1234567890:rvrFAB1:cvnSAMSUNGELECTRONICSCO.,LTD.:ct9:cvr0.1: dmi.product.name: 530U3C/530U4C dmi.product.version: 0.1 dmi.sys.vendor: SAMSUNG ELECTRONICS CO., LTD. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/736171/+subscriptions --
[Kernel-packages] [Bug 736171] Re: 168c:002a ath: Failed to stop TX DMA in 100 msec after killing last frame
** No longer affects: linux (Ubuntu) ** Package changed: fedora => linux (Ubuntu) ** Changed in: linux (Ubuntu) Importance: High => Undecided ** Changed in: linux (Ubuntu) Status: Expired => New ** Changed in: linux (Ubuntu) Remote watch: Red Hat Bugzilla #755370 => None ** No longer affects: linux (Ubuntu) ** Project changed: linux => linux (Ubuntu) ** Changed in: linux (Ubuntu) Importance: Medium => Undecided ** Changed in: linux (Ubuntu) Status: In Progress => New ** Changed in: linux (Ubuntu) Remote watch: Linux Kernel Bug Tracker #27392 => None -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/736171 Title: 168c:002a ath: Failed to stop TX DMA in 100 msec after killing last frame Status in linux package in Ubuntu: Incomplete Bug description: Message in dmesg: [ 22.308381] ath: Failed to stop TX DMA in 100 msec after killing last frame [ 22.308447] ath: Failed to stop TX DMA! --- ApportVersion: 2.12-0ubuntu3 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: caravena 1670 F pulseaudio /dev/snd/controlC1: caravena 1670 F pulseaudio /dev/snd/pcmC1D0p: caravena 1670 F...m pulseaudio CRDA: country CL: (2402 - 2482 @ 40), (N/A, 20) (5170 - 5250 @ 40), (N/A, 20) (5250 - 5330 @ 40), (N/A, 20), DFS (5735 - 5835 @ 40), (N/A, 20) DistroRelease: Ubuntu 13.10 HibernationDevice: RESUME=UUID=360bd2d2-4f44-4311-86d6-4781ac81ee87 InstallationDate: Installed on 2013-07-31 (17 days ago) InstallationMedia: Ubuntu-GNOME 13.10 "Saucy Salamander" - Alpha amd64 (20130724) MachineType: SAMSUNG ELECTRONICS CO., LTD. 530U3C/530U4C MarkForUpload: True Package: linux (not installed) ProcFB: 0 inteldrmfb 1 VESA VGA ProcKernelCmdLine: BOOT_IMAGE=/@/boot/vmlinuz-3.11.0-2-generic root=UUID=0c67119c-ddae-476a-b510-142ec598f691 ro rootflags=subvol=@ quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 3.11.0-2.5-generic 3.11.0-rc5 RelatedPackageVersions: linux-restricted-modules-3.11.0-2-generic N/A linux-backports-modules-3.11.0-2-generic N/A linux-firmware1.113 Tags: saucy Uname: Linux 3.11.0-2-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo dmi.bios.date: 04/15/2013 dmi.bios.vendor: Phoenix Technologies Ltd. dmi.bios.version: P14AAJ dmi.board.asset.tag: Base Board Asset Tag dmi.board.name: SAMSUNG_NP1234567890 dmi.board.vendor: SAMSUNG ELECTRONICS CO., LTD. dmi.board.version: FAB1 dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 9 dmi.chassis.vendor: SAMSUNG ELECTRONICS CO., LTD. dmi.chassis.version: 0.1 dmi.modalias: dmi:bvnPhoenixTechnologiesLtd.:bvrP14AAJ:bd04/15/2013:svnSAMSUNGELECTRONICSCO.,LTD.:pn530U3C/530U4C:pvr0.1:rvnSAMSUNGELECTRONICSCO.,LTD.:rnSAMSUNG_NP1234567890:rvrFAB1:cvnSAMSUNGELECTRONICSCO.,LTD.:ct9:cvr0.1: dmi.product.name: 530U3C/530U4C dmi.product.version: 0.1 dmi.sys.vendor: SAMSUNG ELECTRONICS CO., LTD. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/736171/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 736171] Status changed to Confirmed
This change was made by a bot. ** Changed in: linux (Ubuntu) Status: New => Confirmed -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/736171 Title: 168c:002a ath: Failed to stop TX DMA in 100 msec after killing last frame Status in linux package in Ubuntu: Incomplete Bug description: Message in dmesg: [ 22.308381] ath: Failed to stop TX DMA in 100 msec after killing last frame [ 22.308447] ath: Failed to stop TX DMA! --- ApportVersion: 2.12-0ubuntu3 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: caravena 1670 F pulseaudio /dev/snd/controlC1: caravena 1670 F pulseaudio /dev/snd/pcmC1D0p: caravena 1670 F...m pulseaudio CRDA: country CL: (2402 - 2482 @ 40), (N/A, 20) (5170 - 5250 @ 40), (N/A, 20) (5250 - 5330 @ 40), (N/A, 20), DFS (5735 - 5835 @ 40), (N/A, 20) DistroRelease: Ubuntu 13.10 HibernationDevice: RESUME=UUID=360bd2d2-4f44-4311-86d6-4781ac81ee87 InstallationDate: Installed on 2013-07-31 (17 days ago) InstallationMedia: Ubuntu-GNOME 13.10 "Saucy Salamander" - Alpha amd64 (20130724) MachineType: SAMSUNG ELECTRONICS CO., LTD. 530U3C/530U4C MarkForUpload: True Package: linux (not installed) ProcFB: 0 inteldrmfb 1 VESA VGA ProcKernelCmdLine: BOOT_IMAGE=/@/boot/vmlinuz-3.11.0-2-generic root=UUID=0c67119c-ddae-476a-b510-142ec598f691 ro rootflags=subvol=@ quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 3.11.0-2.5-generic 3.11.0-rc5 RelatedPackageVersions: linux-restricted-modules-3.11.0-2-generic N/A linux-backports-modules-3.11.0-2-generic N/A linux-firmware1.113 Tags: saucy Uname: Linux 3.11.0-2-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo dmi.bios.date: 04/15/2013 dmi.bios.vendor: Phoenix Technologies Ltd. dmi.bios.version: P14AAJ dmi.board.asset.tag: Base Board Asset Tag dmi.board.name: SAMSUNG_NP1234567890 dmi.board.vendor: SAMSUNG ELECTRONICS CO., LTD. dmi.board.version: FAB1 dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 9 dmi.chassis.vendor: SAMSUNG ELECTRONICS CO., LTD. dmi.chassis.version: 0.1 dmi.modalias: dmi:bvnPhoenixTechnologiesLtd.:bvrP14AAJ:bd04/15/2013:svnSAMSUNGELECTRONICSCO.,LTD.:pn530U3C/530U4C:pvr0.1:rvnSAMSUNGELECTRONICSCO.,LTD.:rnSAMSUNG_NP1234567890:rvrFAB1:cvnSAMSUNGELECTRONICSCO.,LTD.:ct9:cvr0.1: dmi.product.name: 530U3C/530U4C dmi.product.version: 0.1 dmi.sys.vendor: SAMSUNG ELECTRONICS CO., LTD. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/736171/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 940267] [NEW] USB keyboard and mouse can't be used after shutdown and power on
You have been subscribed to a public bug: I initially reported this bug in Ubuntu 11.04 (https://bugs.launchpad.net/ubuntu/+source/linux/+bug/786272). Maybe somebody can reactivate bug #786272... --- If I shutdown 11.10 the computer finally turns off. But the mouse light sometimes remains lit. If I turn on the computer again, the BIOS does not recognize my USB keyboard and mouse. I saw that the three LEDs on the keyboard were blinking. As a result, no OS is able to initialize and use the keyboard and mouse. I have to unplug the power chord and wait until the power supply is discharged or unplug the keyboard and mouse. Then the mouse and keyboard functions completely ok. This bug also exists in Fedora 16 >3.1.7 kernels. 3.1.7 worked well for me. ProblemType: Bug DistroRelease: Ubuntu 11.10 Package: linux-image-3.0.0-16-generic 3.0.0-16.28 ProcVersionSignature: Ubuntu 3.0.0-16.28-generic 3.0.17 Uname: Linux 3.0.0-16-generic x86_64 NonfreeKernelModules: fglrx AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.24. ApportVersion: 1.23-0ubuntu4 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: andreas1741 F pulseaudio /dev/snd/pcmC1D0p: andreas1741 F...m pulseaudio CRDA: Error: [Errno 2] Datei oder Verzeichnis nicht gefunden Card0.Amixer.info: Card hw:0 'NVidia'/'HDA NVidia at 0xfe9f irq 21' Mixer name : 'Realtek ALC883' Components : 'HDA:10ec0883,14627250,0012' Controls : 38 Simple ctrls : 21 Card1.Amixer.info: Card hw:1 'Speaker'/'Logitech Z-10 USB Speaker at usb-:00:02.0-8, full speed' Mixer name : 'USB Mixer' Components : 'USB046d:0a07' Controls : 4 Simple ctrls : 3 Card2.Amixer.info: Card hw:2 'Generic'/'HD-Audio Generic at 0xfebbc000 irq 46' Mixer name : 'ATI R6xx HDMI' Components : 'HDA:1002aa01,00aa0100,00100200' Controls : 4 Simple ctrls : 1 Card2.Amixer.values: Simple mixer control 'IEC958',0 Capabilities: pswitch pswitch-joined penum Playback channels: Mono Mono: Playback [on] Date: Fri Feb 24 13:19:30 2012 HibernationDevice: RESUME=UUID=9c426c7c-f334-489f-a9c3-9bfb53647e84 InstallationMedia: Ubuntu 11.10 "Oneiric Ocelot" - Release amd64 (20111012) IwConfig: lono wireless extensions. eth0 no wireless extensions. eth1 no wireless extensions. MachineType: MSI MS-7250 ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.0.0-16-generic root=UUID=b1dc87e2-d4df-455b-a81c-5f5a3f3f05bc ro rootflags=subvol=@ quiet splash vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-3.0.0-16-generic N/A linux-backports-modules-3.0.0-16-generic N/A linux-firmware1.60 RfKill: SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 04/07/2008 dmi.bios.vendor: MS-7250 dmi.bios.version: V1.11 dmi.board.asset.tag: To Be Filled By O.E.M. dmi.board.name: MS-7250 dmi.board.vendor: MSI dmi.board.version: 1.0 dmi.chassis.asset.tag: To Be Filled By O.E.M. dmi.chassis.type: 3 dmi.chassis.vendor: To Be Filled By O.E.M. dmi.chassis.version: To Be Filled By O.E.M. dmi.modalias: dmi:bvnMS-7250:bvrV1.11:bd04/07/2008:svnMSI:pnMS-7250:pvr1.0:rvnMSI:rnMS-7250:rvr1.0:cvnToBeFilledByO.E.M.:ct3:cvrToBeFilledByO.E.M.: dmi.product.name: MS-7250 dmi.product.version: 1.0 dmi.sys.vendor: MSI ** Affects: linux (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug kernel-bug-exists-upstream-v3.3-rc4 latest-bios-v1.11 natty needs-upstream-testing oneiric running-unity -- USB keyboard and mouse can't be used after shutdown and power on https://bugs.launchpad.net/bugs/940267 You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1728446] Status changed to Confirmed
This change was made by a bot. ** Changed in: linux (Ubuntu) Status: New => Confirmed ** Tags added: xenial -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1728446 Title: Middle clicking isn't working properly Logitech M705 Status in linux package in Ubuntu: Confirmed Bug description: I'm using Ubuntu 16.04, (stock install 16.04.3, not HWE LTS) with a newly bought mouse, Logitech M705 (which are using Logitech Unifying Receiver). When I connected the mouse everything was working as expected, except that the middle clicking wasn't working. The mouse has the following map: 1Left 2Middle (push roller down) 3Right 4Roller Forward 5Roller Back 6Roller tilt left 7Roller tilt right 8Side button, forward 9Side Button, rearward 10 Extra button (app switching) When I tried the mouse with 'xev | grep button', the button Left was nr 1, Right nr 3, Roller Forward nr 4, Roller Back nr 5, Roller tilt left nr 6, Roller tilt right nr 7, Side button, forward nr 8, Side Button, rearward nr 9 and Extra button was nr 10. But Middle button was the same as Roller tilt left namely nr 6. It should have been number 2 not 6. Thus the middle click button wasn't properly detected and not working as expected. I can remap the mouse button nr 6 to nr 2 with xinput and get middle clicking but then the left tilt functionality disappear, this button (nr 6) also become a middle click button, nr 2. What is it that makes that two different buttons get the same number? xinput list shows: xinput list ⎡ Virtual core pointerid=2[master pointer (3)] ⎜ ↳ Virtual core XTEST pointer id=4[slave pointer (2)] ⎜ ↳ Logitech M705 id=8[slave pointer (2)] ⎜ ↳ Logitech K520 id=9[slave pointer (2)] ⎣ Virtual core keyboard id=3[master keyboard (2)] ↳ Virtual core XTEST keyboard id=5[slave keyboard (3)] ↳ Power Buttonid=6[slave keyboard (3)] ↳ Power Buttonid=7[slave keyboard (3)] ↳ Eee PC WMI hotkeys id=10 [slave keyboard (3)] And xinput list 8 Logitech M705 id=8[slave pointer (2)] Reporting 7 classes: Class originated from: 8. Type: XIButtonClass Buttons supported: 24 Button labels: "Button Left" "Button Middle" "Button Right" "Button Wheel Up" "Button Wheel Down" "Button Horiz Wheel Left" "Button Horiz Wheel Right" "Button Side" "Button Extra" "Button Forward" "Button Back" "Button Task" "Button Unknown" "Button Unknown" "Button Unknown" "Button Unknown" "Button Unknown" "Button Unknown" "Button Unknown" "Button Unknown" "Button Unknown" "Button Unknown" "Button Unknown" "Button Unknown" Button state: Class originated from: 8. Type: XIValuatorClass Detail for Valuator 0: Label: Rel X Range: -1.00 - -1.00 Resolution: 1 units/m Mode: relative Class originated from: 8. Type: XIValuatorClass Detail for Valuator 1: Label: Rel Y Range: -1.00 - -1.00 Resolution: 1 units/m Mode: relative Class originated from: 8. Type: XIValuatorClass Detail for Valuator 2: Label: Rel Horiz Wheel Range: -1.00 - -1.00 Resolution: 1 units/m Mode: relative Class originated from: 8. Type: XIValuatorClass Detail for Valuator 3: Label: Rel Vert Wheel Range: -1.00 - -1.00 Resolution: 1 units/m Mode: relative Class originated from: 8. Type: XIScrollClass Scroll info for Valuator 2 type: 2 (horizontal) increment: 1.00 flags: 0x0 Class originated from: 8. Type: XIScrollClass Scroll info for Valuator 3 type: 1 (vertical) increment: -1.00 flags: 0x2 ( preferred ) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1728446/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help :
[Kernel-packages] [Bug 935778] [NEW] Toshiba Tecra R840 - brightness controls work on first boot, but do nothing after suspend/resume
You have been subscribed to a public bug: Overview - This bug affects many Toshiba laptops including R700, R705, R800, R830, R835, R840, R850, Z930 models - please update this description if your model is also affected, but make sure the symptoms match exactly. The symptoms are that brightness control operates normally when the system is first booted, but after a suspend-to-RAM and resume cycle the brightness controls have no effect. After a normal reboot, or hibernate & resume cycle, the brightness controls operate normally again. This bug is tracked for the kernel at: http://bugzilla.kernel.org/show_bug.cgi?id=21012 And for Debian at: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=599768 Please try to keep all info together and pass any progress to the upstream trackers. Original report for #935778 follows: On my Toshiba R840, the brightness controls work fine on first boot, but do nothing after suspend/resume. This is particularly frustrating if I suspend with the screen at all dimmed, because once I resume, I have no way of increasing the brightness short of a reboot. ProblemType: Bug DistroRelease: Ubuntu 12.04 Package: linux-image-generic 3.2.0.16.16 ProcVersionSignature: Ubuntu 3.2.0-16.25-generic 3.2.6 Uname: Linux 3.2.0-16-generic x86_64 AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.24. ApportVersion: 1.91-0ubuntu1 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: james 2251 F pulseaudio /dev/snd/pcmC0D0p: james 2251 F...m pulseaudio CRDA: country EU: (2402 - 2482 @ 40), (N/A, 20) (5170 - 5250 @ 40), (N/A, 20) (5250 - 5330 @ 40), (N/A, 20), DFS (5490 - 5710 @ 40), (N/A, 27), DFS Card0.Amixer.info: Card hw:0 'PCH'/'HDA Intel PCH at 0xc482 irq 50' Mixer name : 'Intel CougarPoint HDMI' Components : 'HDA:10ec0269,1179062a,00100100 HDA:80862805,11790001,0010' Controls : 30 Simple ctrls : 12 Date: Sat Feb 18 21:27:12 2012 EcryptfsInUse: Yes InstallationMedia: Ubuntu 11.10 "Oneiric Ocelot" - Release amd64 (20111012) MachineType: TOSHIBA TECRA R840 ProcEnviron: LANGUAGE=en_GB:en PATH=(custom, no user) LANG=en_GB.UTF-8 SHELL=/bin/bash ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.2.0-16-generic root=UUID=16b08eff-30c4-4fe0-bede-cf8cb31270bf ro quiet splash vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-3.2.0-16-generic N/A linux-backports-modules-3.2.0-16-generic N/A linux-firmware1.69 RfKill: 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no SourcePackage: linux StagingDrivers: mei UpgradeStatus: Upgraded to precise on 2012-01-09 (39 days ago) dmi.bios.date: 07/12/2011 dmi.bios.vendor: TOSHIBA dmi.bios.version: Version 2.90 dmi.board.asset.tag: 00 dmi.board.name: Portable PC dmi.board.vendor: TOSHIBA dmi.board.version: Version A0 dmi.chassis.asset.tag: 00 dmi.chassis.type: 10 dmi.chassis.vendor: TOSHIBA dmi.chassis.version: Version 1.0 dmi.modalias: dmi:bvnTOSHIBA:bvrVersion2.90:bd07/12/2011:svnTOSHIBA:pnTECRAR840:pvrPT42GE-00N006EN:rvnTOSHIBA:rnPortablePC:rvrVersionA0:cvnTOSHIBA:ct10:cvrVersion1.0: dmi.product.name: TECRA R840 dmi.product.version: PT42GE-00N006EN dmi.sys.vendor: TOSHIBA ** Affects: linux Importance: Medium Status: Confirmed ** Affects: debian Importance: Unknown Status: Confirmed ** Affects: fedora Importance: Undecided Status: Won't Fix ** Affects: linux (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug kernel-da-key needs-full-computer-model needs-upstream-testing precise staging -- Toshiba Tecra R840 - brightness controls work on first boot, but do nothing after suspend/resume https://bugs.launchpad.net/bugs/935778 You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1723799] Re: touchpad not working after resume on kernel 4.13
4.13.7-041307-generic fixes the issue also for me (Lenovo Yoga 3 11, fresh Ubuntu 17.10 install) -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1723799 Title: touchpad not working after resume on kernel 4.13 Status in linux package in Ubuntu: Confirmed Bug description: I'm running Ubuntu 17.10 [Ubuntu Artful Aardvark (development branch) installed from beta 2 ISO with latest apt update && apt dist-upgrade] with kernel: $ uname -rv 4.13.0-16-generic #19-Ubuntu SMP Wed Oct 11 18:35:14 UTC 2017 and after putting system to sleep via closing laptop lid and then resuming it by opening laptop lid makes touchpad not working. Kernel message buffer contains following error message after resume: PM: Device i2c-SYNA3105:00 failed to resume async: error -11 and I can find other people reporting similar issue on other distros: https://bugzilla.redhat.com/show_bug.cgi?id=1431375 https://bugzilla.kernel.org/show_bug.cgi?id=195949 https://bugzilla.redhat.com/show_bug.cgi?id=1442699 like in those other bug reports I can workaround the problem by: rmmod i2c-hid modprobe i2c-hid in systemd-suspend.service(8) post scripts. ProblemType: Bug DistroRelease: Ubuntu 17.10 Package: linux-image-extra-4.13.0-16-generic 4.13.0-16.19 ProcVersionSignature: Ubuntu 4.13.0-16.19-generic 4.13.4 Uname: Linux 4.13.0-16-generic x86_64 ApportVersion: 2.20.7-0ubuntu3 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: mkucharski 1367 F pulseaudio CurrentDesktop: ubuntu:GNOME Date: Sun Oct 15 22:49:38 2017 HibernationDevice: RESUME=UUID=aa9acb18-b692-4020-9811-d58e5c8b8857 InstallationDate: Installed on 2017-10-06 (9 days ago) InstallationMedia: Ubuntu 17.10 "Artful Aardvark" - Alpha amd64 (20170926) Lsusb: Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 003: ID 05c8:03a1 Cheng Uei Precision Industry Co., Ltd (Foxlink) Bus 001 Device 002: ID 8087:0a2b Intel Corp. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub MachineType: Timi TM1607 ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-4.13.0-16-generic.efi.signed root=/dev/mapper/ubuntu--vg-root ro quiet splash vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-4.13.0-16-generic N/A linux-backports-modules-4.13.0-16-generic N/A linux-firmware 1.169 SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 05/07/2017 dmi.bios.vendor: INSYDE Corp. dmi.bios.version: XMAKB200P0100 dmi.board.asset.tag: Any dmi.board.name: TM1607 dmi.board.vendor: Timi dmi.board.version: MP dmi.chassis.asset.tag: Chassis Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: Timi dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnINSYDECorp.:bvrXMAKB200P0100:bd05/07/2017:svnTimi:pnTM1607:pvr:rvnTimi:rnTM1607:rvrMP:cvnTimi:ct10:cvrChassisVersion: dmi.product.family: Timibook dmi.product.name: TM1607 dmi.sys.vendor: Timi To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1723799/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 935778] [NEW] Toshiba Tecra R840 - brightness controls work on first boot, but do nothing after suspend/resume
You have been subscribed to a public bug: Overview - This bug affects many Toshiba laptops including R700, R705, R800, R830, R835, R840, R850, Z930 models - please update this description if your model is also affected, but make sure the symptoms match exactly. The symptoms are that brightness control operates normally when the system is first booted, but after a suspend-to-RAM and resume cycle the brightness controls have no effect. After a normal reboot, or hibernate & resume cycle, the brightness controls operate normally again. This bug is tracked for the kernel at: http://bugzilla.kernel.org/show_bug.cgi?id=21012 And for Debian at: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=599768 Please try to keep all info together and pass any progress to the upstream trackers. Original report for #935778 follows: On my Toshiba R840, the brightness controls work fine on first boot, but do nothing after suspend/resume. This is particularly frustrating if I suspend with the screen at all dimmed, because once I resume, I have no way of increasing the brightness short of a reboot. ProblemType: Bug DistroRelease: Ubuntu 12.04 Package: linux-image-generic 3.2.0.16.16 ProcVersionSignature: Ubuntu 3.2.0-16.25-generic 3.2.6 Uname: Linux 3.2.0-16-generic x86_64 AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.24. ApportVersion: 1.91-0ubuntu1 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: james 2251 F pulseaudio /dev/snd/pcmC0D0p: james 2251 F...m pulseaudio CRDA: country EU: (2402 - 2482 @ 40), (N/A, 20) (5170 - 5250 @ 40), (N/A, 20) (5250 - 5330 @ 40), (N/A, 20), DFS (5490 - 5710 @ 40), (N/A, 27), DFS Card0.Amixer.info: Card hw:0 'PCH'/'HDA Intel PCH at 0xc482 irq 50' Mixer name : 'Intel CougarPoint HDMI' Components : 'HDA:10ec0269,1179062a,00100100 HDA:80862805,11790001,0010' Controls : 30 Simple ctrls : 12 Date: Sat Feb 18 21:27:12 2012 EcryptfsInUse: Yes InstallationMedia: Ubuntu 11.10 "Oneiric Ocelot" - Release amd64 (20111012) MachineType: TOSHIBA TECRA R840 ProcEnviron: LANGUAGE=en_GB:en PATH=(custom, no user) LANG=en_GB.UTF-8 SHELL=/bin/bash ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.2.0-16-generic root=UUID=16b08eff-30c4-4fe0-bede-cf8cb31270bf ro quiet splash vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-3.2.0-16-generic N/A linux-backports-modules-3.2.0-16-generic N/A linux-firmware1.69 RfKill: 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no SourcePackage: linux StagingDrivers: mei UpgradeStatus: Upgraded to precise on 2012-01-09 (39 days ago) dmi.bios.date: 07/12/2011 dmi.bios.vendor: TOSHIBA dmi.bios.version: Version 2.90 dmi.board.asset.tag: 00 dmi.board.name: Portable PC dmi.board.vendor: TOSHIBA dmi.board.version: Version A0 dmi.chassis.asset.tag: 00 dmi.chassis.type: 10 dmi.chassis.vendor: TOSHIBA dmi.chassis.version: Version 1.0 dmi.modalias: dmi:bvnTOSHIBA:bvrVersion2.90:bd07/12/2011:svnTOSHIBA:pnTECRAR840:pvrPT42GE-00N006EN:rvnTOSHIBA:rnPortablePC:rvrVersionA0:cvnTOSHIBA:ct10:cvrVersion1.0: dmi.product.name: TECRA R840 dmi.product.version: PT42GE-00N006EN dmi.sys.vendor: TOSHIBA ** Affects: linux Importance: Medium Status: Confirmed ** Affects: linux (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug kernel-da-key needs-full-computer-model needs-upstream-testing precise staging -- Toshiba Tecra R840 - brightness controls work on first boot, but do nothing after suspend/resume https://bugs.launchpad.net/bugs/935778 You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 935778] [NEW] Toshiba Tecra R840 - brightness controls work on first boot, but do nothing after suspend/resume
You have been subscribed to a public bug: Overview - This bug affects many Toshiba laptops including R700, R705, R800, R830, R835, R840, R850, Z930 models - please update this description if your model is also affected, but make sure the symptoms match exactly. The symptoms are that brightness control operates normally when the system is first booted, but after a suspend-to-RAM and resume cycle the brightness controls have no effect. After a normal reboot, or hibernate & resume cycle, the brightness controls operate normally again. This bug is tracked for the kernel at: http://bugzilla.kernel.org/show_bug.cgi?id=21012 And for Debian at: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=599768 Please try to keep all info together and pass any progress to the upstream trackers. Original report for #935778 follows: On my Toshiba R840, the brightness controls work fine on first boot, but do nothing after suspend/resume. This is particularly frustrating if I suspend with the screen at all dimmed, because once I resume, I have no way of increasing the brightness short of a reboot. ProblemType: Bug DistroRelease: Ubuntu 12.04 Package: linux-image-generic 3.2.0.16.16 ProcVersionSignature: Ubuntu 3.2.0-16.25-generic 3.2.6 Uname: Linux 3.2.0-16-generic x86_64 AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.24. ApportVersion: 1.91-0ubuntu1 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: james 2251 F pulseaudio /dev/snd/pcmC0D0p: james 2251 F...m pulseaudio CRDA: country EU: (2402 - 2482 @ 40), (N/A, 20) (5170 - 5250 @ 40), (N/A, 20) (5250 - 5330 @ 40), (N/A, 20), DFS (5490 - 5710 @ 40), (N/A, 27), DFS Card0.Amixer.info: Card hw:0 'PCH'/'HDA Intel PCH at 0xc482 irq 50' Mixer name : 'Intel CougarPoint HDMI' Components : 'HDA:10ec0269,1179062a,00100100 HDA:80862805,11790001,0010' Controls : 30 Simple ctrls : 12 Date: Sat Feb 18 21:27:12 2012 EcryptfsInUse: Yes InstallationMedia: Ubuntu 11.10 "Oneiric Ocelot" - Release amd64 (20111012) MachineType: TOSHIBA TECRA R840 ProcEnviron: LANGUAGE=en_GB:en PATH=(custom, no user) LANG=en_GB.UTF-8 SHELL=/bin/bash ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.2.0-16-generic root=UUID=16b08eff-30c4-4fe0-bede-cf8cb31270bf ro quiet splash vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-3.2.0-16-generic N/A linux-backports-modules-3.2.0-16-generic N/A linux-firmware1.69 RfKill: 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no SourcePackage: linux StagingDrivers: mei UpgradeStatus: Upgraded to precise on 2012-01-09 (39 days ago) dmi.bios.date: 07/12/2011 dmi.bios.vendor: TOSHIBA dmi.bios.version: Version 2.90 dmi.board.asset.tag: 00 dmi.board.name: Portable PC dmi.board.vendor: TOSHIBA dmi.board.version: Version A0 dmi.chassis.asset.tag: 00 dmi.chassis.type: 10 dmi.chassis.vendor: TOSHIBA dmi.chassis.version: Version 1.0 dmi.modalias: dmi:bvnTOSHIBA:bvrVersion2.90:bd07/12/2011:svnTOSHIBA:pnTECRAR840:pvrPT42GE-00N006EN:rvnTOSHIBA:rnPortablePC:rvrVersionA0:cvnTOSHIBA:ct10:cvrVersion1.0: dmi.product.name: TECRA R840 dmi.product.version: PT42GE-00N006EN dmi.sys.vendor: TOSHIBA ** Affects: linux (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug kernel-da-key needs-full-computer-model needs-upstream-testing precise staging -- Toshiba Tecra R840 - brightness controls work on first boot, but do nothing after suspend/resume https://bugs.launchpad.net/bugs/935778 You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 736171] [NEW] 168c:002a ath: Failed to stop TX DMA in 100 msec after killing last frame
You have been subscribed to a public bug: Message in dmesg: [ 22.308381] ath: Failed to stop TX DMA in 100 msec after killing last frame [ 22.308447] ath: Failed to stop TX DMA! --- ApportVersion: 2.12-0ubuntu3 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: caravena 1670 F pulseaudio /dev/snd/controlC1: caravena 1670 F pulseaudio /dev/snd/pcmC1D0p: caravena 1670 F...m pulseaudio CRDA: country CL: (2402 - 2482 @ 40), (N/A, 20) (5170 - 5250 @ 40), (N/A, 20) (5250 - 5330 @ 40), (N/A, 20), DFS (5735 - 5835 @ 40), (N/A, 20) DistroRelease: Ubuntu 13.10 HibernationDevice: RESUME=UUID=360bd2d2-4f44-4311-86d6-4781ac81ee87 InstallationDate: Installed on 2013-07-31 (17 days ago) InstallationMedia: Ubuntu-GNOME 13.10 "Saucy Salamander" - Alpha amd64 (20130724) MachineType: SAMSUNG ELECTRONICS CO., LTD. 530U3C/530U4C MarkForUpload: True Package: linux (not installed) ProcFB: 0 inteldrmfb 1 VESA VGA ProcKernelCmdLine: BOOT_IMAGE=/@/boot/vmlinuz-3.11.0-2-generic root=UUID=0c67119c-ddae-476a-b510-142ec598f691 ro rootflags=subvol=@ quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 3.11.0-2.5-generic 3.11.0-rc5 RelatedPackageVersions: linux-restricted-modules-3.11.0-2-generic N/A linux-backports-modules-3.11.0-2-generic N/A linux-firmware1.113 Tags: saucy Uname: Linux 3.11.0-2-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo dmi.bios.date: 04/15/2013 dmi.bios.vendor: Phoenix Technologies Ltd. dmi.bios.version: P14AAJ dmi.board.asset.tag: Base Board Asset Tag dmi.board.name: SAMSUNG_NP1234567890 dmi.board.vendor: SAMSUNG ELECTRONICS CO., LTD. dmi.board.version: FAB1 dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 9 dmi.chassis.vendor: SAMSUNG ELECTRONICS CO., LTD. dmi.chassis.version: 0.1 dmi.modalias: dmi:bvnPhoenixTechnologiesLtd.:bvrP14AAJ:bd04/15/2013:svnSAMSUNGELECTRONICSCO.,LTD.:pn530U3C/530U4C:pvr0.1:rvnSAMSUNGELECTRONICSCO.,LTD.:rnSAMSUNG_NP1234567890:rvrFAB1:cvnSAMSUNGELECTRONICSCO.,LTD.:ct9:cvr0.1: dmi.product.name: 530U3C/530U4C dmi.product.version: 0.1 dmi.sys.vendor: SAMSUNG ELECTRONICS CO., LTD. ** Affects: linux (Ubuntu) Importance: Undecided Status: New ** Tags: apport-collected needs-full-computer-model needs-kernel-logs needs-upstream-testing patch saucy -- 168c:002a ath: Failed to stop TX DMA in 100 msec after killing last frame https://bugs.launchpad.net/bugs/736171 You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 751689] Re: [Lenovo Thinkpad x201s] Overheat due to slow fans when on 'auto'
** Changed in: linux (Ubuntu Precise) Status: Confirmed => Won't Fix -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/751689 Title: [Lenovo Thinkpad x201s] Overheat due to slow fans when on 'auto' Status in linux package in Ubuntu: Fix Released Status in linux source package in Maverick: Won't Fix Status in linux source package in Natty: Won't Fix Status in linux source package in Precise: Won't Fix Status in thinkfan package in Debian: Fix Released Status in linux package in Fedora: Won't Fix Bug description: On my Thinkpad x201s with an i7, if I utilize all of the CPUs/hyperthreads, the machine can be made to overheat very quickly. This is because of the default level setting of 'auto' in /proc/acpi/ibm/fan. On 'auto', the fan only ever goes up to around 4500rpm, while in 'disengaged' mode it can go as high as 6400rpm. At 4500rpm, the CPU continues to climb until the system is forcibly shutdown at 100C. If I reload thinkpad_acpi like so: $ sudo rmmod thinkpad_acpi $ sudo modprobe thinkpad_acpi fan_control=1 Then I can set the fan to disengaged mode manually: echo "level disengaged" > /proc/acpi/ibm/fan With this setting, I can utilize all of the CPUs for an extended time and not surpass 85C, still pretty hot but well under the 100C range. Furthermore, setting to level '7' (the supposed max fan speed) runs the fan at ~5300, well below the maximum fan speed. In maverick this did not seem to be as much of a problem (perhaps because of the lack of the big kernel lock in natty?). Related bugs: https://bugzilla.redhat.com/show_bug.cgi?id=675433 http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=610722 (against thinkfan package, but demonstrates that other x201 users are having the same problem) ProblemType: Bug DistroRelease: Ubuntu 11.04 Package: linux-image-2.6.38-7-generic 2.6.38-7.39 Regression: Yes Reproducible: Yes ProcVersionSignature: Ubuntu 2.6.38-7.39-generic 2.6.38 Uname: Linux 2.6.38-7-generic x86_64 AcpiTables: Error: command ['gksu', '-D', 'Apport', '--', '/usr/share/apport/dump_acpi_tables.py'] failed with exit code 1: GNOME_SUDO_PASS Sorry, try again. sudo: 3 incorrect password attempts AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.23. Architecture: amd64 ArecordDevices: List of CAPTURE Hardware Devices card 0: Intel [HDA Intel], device 0: CONEXANT Analog [CONEXANT Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: jamie 2641 F pulseaudio /dev/snd/pcmC0D0p: jamie 2641 F...m pulseaudio CRDA: Error: [Errno 2] No such file or directory Card0.Amixer.info: Card hw:0 'Intel'/'HDA Intel at 0xf252 irq 43' Mixer name : 'Intel IbexPeak HDMI' Components : 'HDA:14f15069,17aa2156,00100302 HDA:80862804,17aa21b5,0010' Controls : 12 Simple ctrls : 6 Card29.Amixer.info: Card hw:29 'ThinkPadEC'/'ThinkPad Console Audio Control at EC reg 0x30, fw 6QHT28WW-1.09' Mixer name : 'ThinkPad EC 6QHT28WW-1.09' Components : '' Controls : 1 Simple ctrls : 1 Card29.Amixer.values: Simple mixer control 'Console',0 Capabilities: pswitch pswitch-joined penum Playback channels: Mono Mono: Playback [on] Date: Tue Apr 5 11:56:28 2011 EcryptfsInUse: Yes HibernationDevice: RESUME=UUID=58280e6e-d161-43ea-8593-a89fb7b6851a InstallationMedia: Ubuntu 10.04 LTS "Lucid Lynx" - Release amd64 (20100427.1) MachineType: LENOVO 5129CTO ProcEnviron: LANGUAGE=en_US:en PATH=(custom, user) LANG=en_US.UTF-8 SHELL=/bin/bash ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-2.6.38-7-generic root=UUID=82571cfb-fdda-4d2f-b708-f8924aa0fe21 ro quiet splash vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-2.6.38-7-generic N/A linux-backports-modules-2.6.38-7-generic N/A linux-firmware1.49 SourcePackage: linux UpgradeStatus: Upgraded to natty on 2011-02-24 (39 days ago) dmi.bios.date: 04/20/2010 dmi.bios.vendor: LENOVO dmi.bios.version: 6QET44WW (1.14 ) dmi.board.name: 5129CTO dmi.board.vendor: LENOVO dmi.board.version: Not Available dmi.chassis.asset.tag: No Asset Information dmi.chassis.type: 10 dmi.chassis.vendor: LENOVO dmi.chassis.version: Not Available dmi.modalias: dmi:bvnLENOVO:bvr6QET44WW(1.14):bd04/20/2010:svnLENOVO:pn5129CTO:pvrThinkPadX201s:rvnLENOVO:rn5129CTO:rvrNotAvailable:cvnLENOVO:ct10:cvrNotAvailable: dmi.product.name: 5129CTO dmi.product.version: ThinkPad X201s dmi.sys.vendor: LENOVO To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/751689/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to :
[Kernel-packages] [Bug 847187] Re: [HP Pavilion dv7-6104eg Entertainment Notebook PC] Backlight control doesn't work
OR using EOL release, and no response for years. ** No longer affects: linux (Ubuntu) ** Package changed: fedora => linux (Ubuntu) ** Changed in: linux (Ubuntu) Importance: High => Undecided ** Changed in: linux (Ubuntu) Status: Won't Fix => New ** Changed in: linux (Ubuntu) Remote watch: Red Hat Bugzilla #737620 => None ** Changed in: linux (Ubuntu) Status: New => Invalid -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/847187 Title: [HP Pavilion dv7-6104eg Entertainment Notebook PC] Backlight control doesn't work Status in linux package in Ubuntu: Invalid Bug description: Backlight control on HP Pavilion dv7 6104eg notebook doesn't work using function keys or Gnome power management applet. I found a patch, that should solve the problem: http://www.edgrochowski.com/articles/backlight.htm (haven't tried it yet) lsmod: Module Size Used by parport_pc 36959 0 ppdev 17113 0 rfcomm 47694 8 binfmt_misc17565 1 sco18187 2 bnep 18308 2 l2cap 53570 16 rfcomm,bnep vboxnetadp 13340 0 vboxnetflt 28297 0 vboxdrv 252684 2 vboxnetadp,vboxnetflt snd_hda_codec_hdmi 28167 1 snd_hda_codec_idt 71137 1 arc4 12529 2 joydev 17606 0 uvcvideo 72195 0 usbhid 46956 0 iwlagn333716 0 snd_hda_intel 33176 4 snd_hda_codec 103804 3 snd_hda_codec_hdmi,snd_hda_codec_idt,snd_hda_intel snd_hwdep 13604 1 snd_hda_codec iwlcore 167502 1 iwlagn snd_pcm96391 4 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec videodev 82052 1 uvcvideo i915 515121 3 snd_seq_midi 13324 0 snd_rawmidi30486 1 snd_seq_midi btusb 18600 2 snd_seq_midi_event 14899 1 snd_seq_midi bluetooth 72320 9 rfcomm,sco,bnep,l2cap,btusb snd_seq61621 2 snd_seq_midi,snd_seq_midi_event snd_timer 29602 2 snd_pcm,snd_seq v4l2_compat_ioctl3217078 1 videodev snd_seq_device 14462 3 snd_seq_midi,snd_rawmidi,snd_seq hid91020 1 usbhid hp_wmi 13706 0 sparse_keymap 13898 1 hp_wmi mac80211 294370 2 iwlagn,iwlcore psmouse73535 0 snd67382 17 snd_hda_codec_hdmi,snd_hda_codec_idt,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device drm_kms_helper 42136 1 i915 serio_raw 13166 0 cfg80211 178528 3 iwlagn,iwlcore,mac80211 rts_pstor 440614 0 drm 227534 4 i915,drm_kms_helper soundcore 12680 1 snd snd_page_alloc 18529 2 snd_hda_intel,snd_pcm i2c_algo_bit 13400 1 i915 video 19438 1 i915 hp_accel 21880 0 lis3lv02d 19893 1 hp_accel max665014324 0 input_polldev 14007 1 lis3lv02d coretemp 13490 0 lp 17825 0 parport46458 3 parport_pc,ppdev,lp ahci 25951 2 xhci_hcd 77643 0 libahci26642 1 ahci r8169 48022 0 --- AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.23. Architecture: amd64 ArecordDevices: List of CAPTURE Hardware Devices card 0: PCH [HDA Intel PCH], device 0: STAC92xx Analog [STAC92xx Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: matthias 1587 F pulseaudio CRDA: Error: [Errno 2] No such file or directory Card0.Amixer.info: Card hw:0 'PCH'/'HDA Intel PCH at 0xc750 irq 53' Mixer name : 'Intel CougarPoint HDMI' Components : 'HDA:111d7605,103c3389,00100105 HDA:80862805,80860101,0010' Controls : 18 Simple ctrls : 10 DistroRelease: Ubuntu 11.04 InstallationMedia: Ubuntu 11.04 "Natty Narwhal" - Release amd64 (20110427.1) MachineType: Hewlett-Packard HP Pavilion dv7 Notebook PC Package: linux (not installed) ProcEnviron: LANGUAGE=en_US:en LANG=en_US.UTF-8 SHELL=/bin/zsh ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-2.6.38-11-generic root=UUID=6562386e-524b-41be-8383-6e1944f15f1c ro quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 2.6.38-11.48-generic 2.6.38.8 RelatedPackageVersions: linux-restricted-modules-2.6.38-11-generic N/A linux-backports-modules-2.6.38-11-generic N/A linux-firmware 1.52
[Kernel-packages] [Bug 764003] Re: vodafone k3805-z requires "ifconfig usb0 -arp" prior to connecting to achieve connectivity
** No longer affects: linux (Ubuntu) ** Package changed: linux (Fedora) => linux (Ubuntu) ** Changed in: linux (Ubuntu) Status: Fix Released => New ** Changed in: linux (Ubuntu) Remote watch: Red Hat Bugzilla #729952 => None ** Changed in: linux (Ubuntu) Status: New => Invalid -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/764003 Title: vodafone k3805-z requires "ifconfig usb0 -arp" prior to connecting to achieve connectivity Status in linux package in Ubuntu: Invalid Bug description: Binary package hint: modemmanager Vodafone 3g pen k3805-z requires "ifconfig usb0 -arp" prior to connecting to achieve connectivity. It appears as if everything is blocked unless arp is disabled. ProblemType: Bug DistroRelease: Ubuntu 11.04 Package: modemmanager 0.4+git.20110124t203624.00b6cce-2ubuntu1 ProcVersionSignature: Ubuntu 2.6.38-8.42-generic 2.6.38.2 Uname: Linux 2.6.38-8-generic i686 Architecture: i386 Date: Sun Apr 17 22:48:16 2011 InstallationMedia: Ubuntu 10.10 "Maverick Meerkat" - Release i386 (20101007) ProcEnviron: LANGUAGE=en LANG=pt_PT.UTF-8 LC_MESSAGES=en_US.UTF-8 SHELL=/bin/bash SourcePackage: modemmanager UpgradeStatus: Upgraded to natty on 2011-04-07 (10 days ago) --- AcpiTables: Error: command ['gksu', '-D', 'Apport', '--', '/usr/share/apport/dump_acpi_tables.py'] failed with exit code 3: Error copying '/home/ubuntu/.Xauthority' to '/tmp/libgksu-QrpIwZ': No such file or directory AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.24. Architecture: i386 AudioDevicesInUse: Cannot stat file /proc/3214/fd/11: Stale NFS file handle Cannot stat file /proc/3214/fd/12: Stale NFS file handle Cannot stat file /proc/3955/fd/32: Stale NFS file handle USERPID ACCESS COMMAND /dev/snd/controlC0: ubuntu 3194 F pulseaudio CRDA: Error: [Errno 2] No such file or directory Card0.Amixer.info: Card hw:0 'Intel'/'HDA Intel at 0xf860 irq 47' Mixer name : 'Realtek ALC268' Components : 'HDA:10ec0268,103c30cc,0013 HDA:10573055,10573055,00100700' Controls : 20 Simple ctrls : 12 DistroRelease: Ubuntu 11.10 LiveMediaBuild: Ubuntu 11.10 "Oneiric Ocelot" - Alpha i386 (20110531.1) MachineType: Hewlett-Packard HP Pavilion dv6500 Notebook PC Package: linux (not installed) ProcEnviron: LANG=en_US.UTF-8 SHELL=/bin/bash ProcKernelCmdLine: BOOT_IMAGE=(loop)/casper/vmlinuz boot=casper iso-scan/filename=/ISOtest/oneiric-desktop-i386.iso ProcVersionSignature: Ubuntu 2.6.39-3.10-generic 2.6.39 RelatedPackageVersions: linux-restricted-modules-2.6.39-3-generic N/A linux-backports-modules-2.6.39-3-generic N/A linux-firmware1.53 Tags: oneiric unity-2d Uname: Linux 2.6.39-3-generic i686 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm admin cdrom dialout lpadmin plugdev sambashare dmi.bios.date: 11/25/2008 dmi.bios.vendor: Hewlett-Packard dmi.bios.version: F.59 dmi.board.name: 30CC dmi.board.vendor: Quanta dmi.board.version: 79.2E dmi.chassis.type: 10 dmi.chassis.vendor: Quanta dmi.chassis.version: N/A dmi.modalias: dmi:bvnHewlett-Packard:bvrF.59:bd11/25/2008:svnHewlett-Packard:pnHPPaviliondv6500NotebookPC:pvrRev1:rvnQuanta:rn30CC:rvr79.2E:cvnQuanta:ct10:cvrN/A: dmi.product.name: HP Pavilion dv6500 Notebook PC dmi.product.version: Rev 1 dmi.sys.vendor: Hewlett-Packard To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/764003/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 880648] Re: 8086:0084 wifi iwlagn fails to authenticate after wake from suspend
OR using EOL release, and no response for years. ** No longer affects: linux (Ubuntu) ** Package changed: linux (Fedora) => linux (Ubuntu) ** Changed in: linux (Ubuntu) Importance: High => Undecided ** Changed in: linux (Ubuntu) Status: Fix Released => New ** Changed in: linux (Ubuntu) Remote watch: Red Hat Bugzilla #737424 => None ** Changed in: linux (Ubuntu) Status: New => Invalid -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/880648 Title: 8086:0084 wifi iwlagn fails to authenticate after wake from suspend Status in linux package in Ubuntu: Invalid Bug description: Upgraded to 11.10 from 11.04 today. Now when resume from suspend, wifi fails to reconnect saying waiting for authentication. If I use the last kernel from 11.04, 2.4.39 instead of the new 3.0.0, it still works OK. After wake from suspend, if using ethernet it works OK. lspci -v 0d:00.0 Network controller: Intel Corporation Centrino Wireless-N 1000 Subsystem: Intel Corporation Centrino Wireless-N 1000 BGN Flags: bus master, fast devsel, latency 0, IRQ 53 Memory at c450 (64-bit, non-prefetchable) [size=8K] Capabilities: [c8] Power Management version 3 Capabilities: [d0] MSI: Enable+ Count=1/1 Maskable- 64bit+ Capabilities: [e0] Express Endpoint, MSI 00 Capabilities: [100] Advanced Error Reporting Capabilities: [140] Device Serial Number 8c-a9-82-ff-ff-a0-f4-7a Kernel driver in use: iwlagn Kernel modules: iwlagn --- AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.24. ApportVersion: 1.23-0ubuntu3 Architecture: amd64 ArecordDevices: List of CAPTURE Hardware Devices card 0: PCH [HDA Intel PCH], device 0: STAC92xx Analog [STAC92xx Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: gene 1793 F pulseaudio CRDA: Error: [Errno 2] No such file or directory Card0.Amixer.info: Card hw:0 'PCH'/'HDA Intel PCH at 0xc750 irq 53' Mixer name : 'Intel CougarPoint HDMI' Components : 'HDA:111d7605,103c165a,00100105 HDA:80862805,80860101,0010' Controls : 18 Simple ctrls : 10 DistroRelease: Ubuntu 11.10 HibernationDevice: RESUME=UUID=522d916f-a489-4247-acf5-ddf837f836b9 InstallationMedia: Ubuntu 11.04 "Natty Narwhal" - Release amd64 (20110427.1) IwConfig: Error: [Errno 2] No such file or directory MachineType: Hewlett-Packard HP Pavilion dv7 Notebook PC Package: linux (not installed) ProcEnviron: LANGUAGE= PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash ProcKernelCmdLine: root=UUID=ca71fcf1-cfed-4e2c-9593-29b47c9cc6a0 ro quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 3.0.0-12.20-usernameric 3.0.4 RelatedPackageVersions: linux-restricted-modules-3.0.0-12-generic N/A linux-backports-modules-3.0.0-12-generic N/A linux-firmware1.60 RfKill: Error: [Errno 2] No such file or directory StagingDrivers: rts_pstor mei Tags: oneiric staging UdevDb: Error: [Errno 2] No such file or directory Uname: Linux 3.0.0-12-generic x86_64 UpgradeStatus: Upgraded to oneiric on 2011-10-23 (0 days ago) UserGroups: adm admin cdrom dialout lpadmin plugdev sambashare dmi.bios.date: 07/20/2011 dmi.bios.vendor: Hewlett-Packard dmi.bios.version: F.1A dmi.board.asset.tag: Base Board Asset Tag dmi.board.name: 165A dmi.board.vendor: Hewlett-Packard dmi.board.version: 10.31 dmi.chassis.asset.tag: Chassis Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: Hewlett-Packard dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnHewlett-Packard:bvrF.1A:bd07/20/2011:svnHewlett-Packard:pnHPPaviliondv7NotebookPC:pvr058D11244620001620100:rvnHewlett-Packard:rn165A:rvr10.31:cvnHewlett-Packard:ct10:cvrChassisVersion: dmi.product.name: HP Pavilion dv7 Notebook PC dmi.product.version: 058D11244620001620100 dmi.sys.vendor: Hewlett-Packard To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/880648/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 736171] [NEW] 168c:002a ath: Failed to stop TX DMA in 100 msec after killing last frame
You have been subscribed to a public bug: Message in dmesg: [ 22.308381] ath: Failed to stop TX DMA in 100 msec after killing last frame [ 22.308447] ath: Failed to stop TX DMA! --- ApportVersion: 2.12-0ubuntu3 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: caravena 1670 F pulseaudio /dev/snd/controlC1: caravena 1670 F pulseaudio /dev/snd/pcmC1D0p: caravena 1670 F...m pulseaudio CRDA: country CL: (2402 - 2482 @ 40), (N/A, 20) (5170 - 5250 @ 40), (N/A, 20) (5250 - 5330 @ 40), (N/A, 20), DFS (5735 - 5835 @ 40), (N/A, 20) DistroRelease: Ubuntu 13.10 HibernationDevice: RESUME=UUID=360bd2d2-4f44-4311-86d6-4781ac81ee87 InstallationDate: Installed on 2013-07-31 (17 days ago) InstallationMedia: Ubuntu-GNOME 13.10 "Saucy Salamander" - Alpha amd64 (20130724) MachineType: SAMSUNG ELECTRONICS CO., LTD. 530U3C/530U4C MarkForUpload: True Package: linux (not installed) ProcFB: 0 inteldrmfb 1 VESA VGA ProcKernelCmdLine: BOOT_IMAGE=/@/boot/vmlinuz-3.11.0-2-generic root=UUID=0c67119c-ddae-476a-b510-142ec598f691 ro rootflags=subvol=@ quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 3.11.0-2.5-generic 3.11.0-rc5 RelatedPackageVersions: linux-restricted-modules-3.11.0-2-generic N/A linux-backports-modules-3.11.0-2-generic N/A linux-firmware1.113 Tags: saucy Uname: Linux 3.11.0-2-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo dmi.bios.date: 04/15/2013 dmi.bios.vendor: Phoenix Technologies Ltd. dmi.bios.version: P14AAJ dmi.board.asset.tag: Base Board Asset Tag dmi.board.name: SAMSUNG_NP1234567890 dmi.board.vendor: SAMSUNG ELECTRONICS CO., LTD. dmi.board.version: FAB1 dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 9 dmi.chassis.vendor: SAMSUNG ELECTRONICS CO., LTD. dmi.chassis.version: 0.1 dmi.modalias: dmi:bvnPhoenixTechnologiesLtd.:bvrP14AAJ:bd04/15/2013:svnSAMSUNGELECTRONICSCO.,LTD.:pn530U3C/530U4C:pvr0.1:rvnSAMSUNGELECTRONICSCO.,LTD.:rnSAMSUNG_NP1234567890:rvrFAB1:cvnSAMSUNGELECTRONICSCO.,LTD.:ct9:cvr0.1: dmi.product.name: 530U3C/530U4C dmi.product.version: 0.1 dmi.sys.vendor: SAMSUNG ELECTRONICS CO., LTD. ** Affects: linux Importance: Medium Status: In Progress ** Affects: linux (Ubuntu) Importance: Undecided Status: New ** Tags: apport-collected needs-full-computer-model needs-kernel-logs needs-upstream-testing patch saucy -- 168c:002a ath: Failed to stop TX DMA in 100 msec after killing last frame https://bugs.launchpad.net/bugs/736171 You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1728446] Re: Middle clicking isn't working properly Logitech M705
apport information ** Attachment added: "lsusb" https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1728446/+attachment/4999652/+files/lsusb.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1728446 Title: Middle clicking isn't working properly Logitech M705 Status in linux package in Ubuntu: New Bug description: I'm using Ubuntu 16.04, (stock install 16.04.3, not HWE LTS) with a newly bought mouse, Logitech M705 (which are using Logitech Unifying Receiver). When I connected the mouse everything was working as expected, except that the middle clicking wasn't working. The mouse has the following map: 1Left 2Middle (push roller down) 3Right 4Roller Forward 5Roller Back 6Roller tilt left 7Roller tilt right 8Side button, forward 9Side Button, rearward 10 Extra button (app switching) When I tried the mouse with 'xev | grep button', the button Left was nr 1, Right nr 3, Roller Forward nr 4, Roller Back nr 5, Roller tilt left nr 6, Roller tilt right nr 7, Side button, forward nr 8, Side Button, rearward nr 9 and Extra button was nr 10. But Middle button was the same as Roller tilt left namely nr 6. It should have been number 2 not 6. Thus the middle click button wasn't properly detected and not working as expected. I can remap the mouse button nr 6 to nr 2 with xinput and get middle clicking but then the left tilt functionality disappear, this button (nr 6) also become a middle click button, nr 2. What is it that makes that two different buttons get the same number? xinput list shows: xinput list ⎡ Virtual core pointerid=2[master pointer (3)] ⎜ ↳ Virtual core XTEST pointer id=4[slave pointer (2)] ⎜ ↳ Logitech M705 id=8[slave pointer (2)] ⎜ ↳ Logitech K520 id=9[slave pointer (2)] ⎣ Virtual core keyboard id=3[master keyboard (2)] ↳ Virtual core XTEST keyboard id=5[slave keyboard (3)] ↳ Power Buttonid=6[slave keyboard (3)] ↳ Power Buttonid=7[slave keyboard (3)] ↳ Eee PC WMI hotkeys id=10 [slave keyboard (3)] And xinput list 8 Logitech M705 id=8[slave pointer (2)] Reporting 7 classes: Class originated from: 8. Type: XIButtonClass Buttons supported: 24 Button labels: "Button Left" "Button Middle" "Button Right" "Button Wheel Up" "Button Wheel Down" "Button Horiz Wheel Left" "Button Horiz Wheel Right" "Button Side" "Button Extra" "Button Forward" "Button Back" "Button Task" "Button Unknown" "Button Unknown" "Button Unknown" "Button Unknown" "Button Unknown" "Button Unknown" "Button Unknown" "Button Unknown" "Button Unknown" "Button Unknown" "Button Unknown" "Button Unknown" Button state: Class originated from: 8. Type: XIValuatorClass Detail for Valuator 0: Label: Rel X Range: -1.00 - -1.00 Resolution: 1 units/m Mode: relative Class originated from: 8. Type: XIValuatorClass Detail for Valuator 1: Label: Rel Y Range: -1.00 - -1.00 Resolution: 1 units/m Mode: relative Class originated from: 8. Type: XIValuatorClass Detail for Valuator 2: Label: Rel Horiz Wheel Range: -1.00 - -1.00 Resolution: 1 units/m Mode: relative Class originated from: 8. Type: XIValuatorClass Detail for Valuator 3: Label: Rel Vert Wheel Range: -1.00 - -1.00 Resolution: 1 units/m Mode: relative Class originated from: 8. Type: XIScrollClass Scroll info for Valuator 2 type: 2 (horizontal) increment: 1.00 flags: 0x0 Class originated from: 8. Type: XIScrollClass Scroll info for Valuator 3 type: 1 (vertical) increment: -1.00 flags: 0x2 ( preferred ) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1728446/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help :
[Kernel-packages] [Bug 1728446] Re: Middle clicking isn't working properly Logitech M705
apport information ** Attachment added: "Dmesg" https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1728446/+attachment/4999650/+files/dmesg.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1728446 Title: Middle clicking isn't working properly Logitech M705 Status in linux package in Ubuntu: New Bug description: I'm using Ubuntu 16.04, (stock install 16.04.3, not HWE LTS) with a newly bought mouse, Logitech M705 (which are using Logitech Unifying Receiver). When I connected the mouse everything was working as expected, except that the middle clicking wasn't working. The mouse has the following map: 1Left 2Middle (push roller down) 3Right 4Roller Forward 5Roller Back 6Roller tilt left 7Roller tilt right 8Side button, forward 9Side Button, rearward 10 Extra button (app switching) When I tried the mouse with 'xev | grep button', the button Left was nr 1, Right nr 3, Roller Forward nr 4, Roller Back nr 5, Roller tilt left nr 6, Roller tilt right nr 7, Side button, forward nr 8, Side Button, rearward nr 9 and Extra button was nr 10. But Middle button was the same as Roller tilt left namely nr 6. It should have been number 2 not 6. Thus the middle click button wasn't properly detected and not working as expected. I can remap the mouse button nr 6 to nr 2 with xinput and get middle clicking but then the left tilt functionality disappear, this button (nr 6) also become a middle click button, nr 2. What is it that makes that two different buttons get the same number? xinput list shows: xinput list ⎡ Virtual core pointerid=2[master pointer (3)] ⎜ ↳ Virtual core XTEST pointer id=4[slave pointer (2)] ⎜ ↳ Logitech M705 id=8[slave pointer (2)] ⎜ ↳ Logitech K520 id=9[slave pointer (2)] ⎣ Virtual core keyboard id=3[master keyboard (2)] ↳ Virtual core XTEST keyboard id=5[slave keyboard (3)] ↳ Power Buttonid=6[slave keyboard (3)] ↳ Power Buttonid=7[slave keyboard (3)] ↳ Eee PC WMI hotkeys id=10 [slave keyboard (3)] And xinput list 8 Logitech M705 id=8[slave pointer (2)] Reporting 7 classes: Class originated from: 8. Type: XIButtonClass Buttons supported: 24 Button labels: "Button Left" "Button Middle" "Button Right" "Button Wheel Up" "Button Wheel Down" "Button Horiz Wheel Left" "Button Horiz Wheel Right" "Button Side" "Button Extra" "Button Forward" "Button Back" "Button Task" "Button Unknown" "Button Unknown" "Button Unknown" "Button Unknown" "Button Unknown" "Button Unknown" "Button Unknown" "Button Unknown" "Button Unknown" "Button Unknown" "Button Unknown" "Button Unknown" Button state: Class originated from: 8. Type: XIValuatorClass Detail for Valuator 0: Label: Rel X Range: -1.00 - -1.00 Resolution: 1 units/m Mode: relative Class originated from: 8. Type: XIValuatorClass Detail for Valuator 1: Label: Rel Y Range: -1.00 - -1.00 Resolution: 1 units/m Mode: relative Class originated from: 8. Type: XIValuatorClass Detail for Valuator 2: Label: Rel Horiz Wheel Range: -1.00 - -1.00 Resolution: 1 units/m Mode: relative Class originated from: 8. Type: XIValuatorClass Detail for Valuator 3: Label: Rel Vert Wheel Range: -1.00 - -1.00 Resolution: 1 units/m Mode: relative Class originated from: 8. Type: XIScrollClass Scroll info for Valuator 2 type: 2 (horizontal) increment: 1.00 flags: 0x0 Class originated from: 8. Type: XIScrollClass Scroll info for Valuator 3 type: 1 (vertical) increment: -1.00 flags: 0x2 ( preferred ) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1728446/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help :
[Kernel-packages] [Bug 1728446] Re: Middle clicking isn't working properly Logitech M705
Using Ubuntu 4.4.0-97.120-generic 4.4.87 Latest Nvidia driver 384.90 -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1728446 Title: Middle clicking isn't working properly Logitech M705 Status in linux package in Ubuntu: New Bug description: I'm using Ubuntu 16.04, (stock install 16.04.3, not HWE LTS) with a newly bought mouse, Logitech M705 (which are using Logitech Unifying Receiver). When I connected the mouse everything was working as expected, except that the middle clicking wasn't working. The mouse has the following map: 1Left 2Middle (push roller down) 3Right 4Roller Forward 5Roller Back 6Roller tilt left 7Roller tilt right 8Side button, forward 9Side Button, rearward 10 Extra button (app switching) When I tried the mouse with 'xev | grep button', the button Left was nr 1, Right nr 3, Roller Forward nr 4, Roller Back nr 5, Roller tilt left nr 6, Roller tilt right nr 7, Side button, forward nr 8, Side Button, rearward nr 9 and Extra button was nr 10. But Middle button was the same as Roller tilt left namely nr 6. It should have been number 2 not 6. Thus the middle click button wasn't properly detected and not working as expected. I can remap the mouse button nr 6 to nr 2 with xinput and get middle clicking but then the left tilt functionality disappear, this button (nr 6) also become a middle click button, nr 2. What is it that makes that two different buttons get the same number? xinput list shows: xinput list ⎡ Virtual core pointerid=2[master pointer (3)] ⎜ ↳ Virtual core XTEST pointer id=4[slave pointer (2)] ⎜ ↳ Logitech M705 id=8[slave pointer (2)] ⎜ ↳ Logitech K520 id=9[slave pointer (2)] ⎣ Virtual core keyboard id=3[master keyboard (2)] ↳ Virtual core XTEST keyboard id=5[slave keyboard (3)] ↳ Power Buttonid=6[slave keyboard (3)] ↳ Power Buttonid=7[slave keyboard (3)] ↳ Eee PC WMI hotkeys id=10 [slave keyboard (3)] And xinput list 8 Logitech M705 id=8[slave pointer (2)] Reporting 7 classes: Class originated from: 8. Type: XIButtonClass Buttons supported: 24 Button labels: "Button Left" "Button Middle" "Button Right" "Button Wheel Up" "Button Wheel Down" "Button Horiz Wheel Left" "Button Horiz Wheel Right" "Button Side" "Button Extra" "Button Forward" "Button Back" "Button Task" "Button Unknown" "Button Unknown" "Button Unknown" "Button Unknown" "Button Unknown" "Button Unknown" "Button Unknown" "Button Unknown" "Button Unknown" "Button Unknown" "Button Unknown" "Button Unknown" Button state: Class originated from: 8. Type: XIValuatorClass Detail for Valuator 0: Label: Rel X Range: -1.00 - -1.00 Resolution: 1 units/m Mode: relative Class originated from: 8. Type: XIValuatorClass Detail for Valuator 1: Label: Rel Y Range: -1.00 - -1.00 Resolution: 1 units/m Mode: relative Class originated from: 8. Type: XIValuatorClass Detail for Valuator 2: Label: Rel Horiz Wheel Range: -1.00 - -1.00 Resolution: 1 units/m Mode: relative Class originated from: 8. Type: XIValuatorClass Detail for Valuator 3: Label: Rel Vert Wheel Range: -1.00 - -1.00 Resolution: 1 units/m Mode: relative Class originated from: 8. Type: XIScrollClass Scroll info for Valuator 2 type: 2 (horizontal) increment: 1.00 flags: 0x0 Class originated from: 8. Type: XIScrollClass Scroll info for Valuator 3 type: 1 (vertical) increment: -1.00 flags: 0x2 ( preferred ) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1728446/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1728446] Re: Middle clicking isn't working properly Logitech M705
apport information ** Attachment added: "lspci" https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1728446/+attachment/4999651/+files/lspci.txt -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1728446 Title: Middle clicking isn't working properly Logitech M705 Status in linux package in Ubuntu: New Bug description: I'm using Ubuntu 16.04, (stock install 16.04.3, not HWE LTS) with a newly bought mouse, Logitech M705 (which are using Logitech Unifying Receiver). When I connected the mouse everything was working as expected, except that the middle clicking wasn't working. The mouse has the following map: 1Left 2Middle (push roller down) 3Right 4Roller Forward 5Roller Back 6Roller tilt left 7Roller tilt right 8Side button, forward 9Side Button, rearward 10 Extra button (app switching) When I tried the mouse with 'xev | grep button', the button Left was nr 1, Right nr 3, Roller Forward nr 4, Roller Back nr 5, Roller tilt left nr 6, Roller tilt right nr 7, Side button, forward nr 8, Side Button, rearward nr 9 and Extra button was nr 10. But Middle button was the same as Roller tilt left namely nr 6. It should have been number 2 not 6. Thus the middle click button wasn't properly detected and not working as expected. I can remap the mouse button nr 6 to nr 2 with xinput and get middle clicking but then the left tilt functionality disappear, this button (nr 6) also become a middle click button, nr 2. What is it that makes that two different buttons get the same number? xinput list shows: xinput list ⎡ Virtual core pointerid=2[master pointer (3)] ⎜ ↳ Virtual core XTEST pointer id=4[slave pointer (2)] ⎜ ↳ Logitech M705 id=8[slave pointer (2)] ⎜ ↳ Logitech K520 id=9[slave pointer (2)] ⎣ Virtual core keyboard id=3[master keyboard (2)] ↳ Virtual core XTEST keyboard id=5[slave keyboard (3)] ↳ Power Buttonid=6[slave keyboard (3)] ↳ Power Buttonid=7[slave keyboard (3)] ↳ Eee PC WMI hotkeys id=10 [slave keyboard (3)] And xinput list 8 Logitech M705 id=8[slave pointer (2)] Reporting 7 classes: Class originated from: 8. Type: XIButtonClass Buttons supported: 24 Button labels: "Button Left" "Button Middle" "Button Right" "Button Wheel Up" "Button Wheel Down" "Button Horiz Wheel Left" "Button Horiz Wheel Right" "Button Side" "Button Extra" "Button Forward" "Button Back" "Button Task" "Button Unknown" "Button Unknown" "Button Unknown" "Button Unknown" "Button Unknown" "Button Unknown" "Button Unknown" "Button Unknown" "Button Unknown" "Button Unknown" "Button Unknown" "Button Unknown" Button state: Class originated from: 8. Type: XIValuatorClass Detail for Valuator 0: Label: Rel X Range: -1.00 - -1.00 Resolution: 1 units/m Mode: relative Class originated from: 8. Type: XIValuatorClass Detail for Valuator 1: Label: Rel Y Range: -1.00 - -1.00 Resolution: 1 units/m Mode: relative Class originated from: 8. Type: XIValuatorClass Detail for Valuator 2: Label: Rel Horiz Wheel Range: -1.00 - -1.00 Resolution: 1 units/m Mode: relative Class originated from: 8. Type: XIValuatorClass Detail for Valuator 3: Label: Rel Vert Wheel Range: -1.00 - -1.00 Resolution: 1 units/m Mode: relative Class originated from: 8. Type: XIScrollClass Scroll info for Valuator 2 type: 2 (horizontal) increment: 1.00 flags: 0x0 Class originated from: 8. Type: XIScrollClass Scroll info for Valuator 3 type: 1 (vertical) increment: -1.00 flags: 0x2 ( preferred ) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1728446/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help :
[Kernel-packages] [Bug 603445] Re: Ricoh SD controller (1180:e822) not working: unknown version
** No longer affects: linux (Fedora) ** No longer affects: linux (Ubuntu) -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/603445 Title: Ricoh SD controller (1180:e822) not working: unknown version Status in linux package in Ubuntu: Invalid Bug description: Also tested on Maverick alpha 2. The laptop is a Dell E5410. This SD reader does not work. Upon insertion of a SD card this shows in dmesg: [ 3466.345329] mmc0: Unexpected interrupt 0x0200. [ 3466.345335] sdhci: == REGISTER DUMP == [ 3466.345343] sdhci: Sys addr: 0x | Version: 0x0402 [ 3466.345350] sdhci: Blk size: 0x7008 | Blk cnt: 0x0001 [ 3466.345357] sdhci: Argument: 0x | Trn mode: 0x0013 [ 3466.345364] sdhci: Present: 0x01ff0202 | Host ctl: 0x0011 [ 3466.345371] sdhci: Power:0x000f | Blk gap: 0x [ 3466.345378] sdhci: Wake-up: 0x | Clock:0x4007 [ 3466.345385] sdhci: Timeout: 0x000a | Int stat: 0x02008000 [ 3466.345392] sdhci: Int enab: 0x02ff00cb | Sig enab: 0x02ff00cb [ 3466.345399] sdhci: AC12 err: 0x | Slot int: 0x0001 [ 3466.345406] sdhci: Caps: 0x21e832b2 | Max curr: 0x0040 [ 3466.345413] sdhci: ADMA Err: 0x0001 | ADMA Ptr: 0x369dd8d8 [ 3466.345415] sdhci: === [ 3466.345443] mmc0: Unexpected interrupt 0x0200. [ 3466.345448] sdhci: == REGISTER DUMP == [ 3466.345455] sdhci: Sys addr: 0x | Version: 0x0402 [ 3466.345462] sdhci: Blk size: 0x7008 | Blk cnt: 0x0001 [ 3466.345469] sdhci: Argument: 0x | Trn mode: 0x0013 [ 3466.345475] sdhci: Present: 0x01ff0202 | Host ctl: 0x0011 [ 3466.345482] sdhci: Power:0x000f | Blk gap: 0x [ 3466.345490] sdhci: Wake-up: 0x | Clock:0x4007 [ 3466.345496] sdhci: Timeout: 0x000a | Int stat: 0x02008008 [ 3466.345503] sdhci: Int enab: 0x02ff00cb | Sig enab: 0x02ff00cb [ 3466.345510] sdhci: AC12 err: 0x | Slot int: 0x0001 [ 3466.345517] sdhci: Caps: 0x21e832b2 | Max curr: 0x0040 [ 3466.345524] sdhci: ADMA Err: 0x0001 | ADMA Ptr: 0x369dd9a4 [ 3466.345527] sdhci: === [ 3466.345556] mmc0: Unexpected interrupt 0x0200. [ 3466.345560] sdhci: == REGISTER DUMP == [ 3466.345566] sdhci: Sys addr: 0x | Version: 0x0402 [ 3466.345572] sdhci: Blk size: 0x7008 | Blk cnt: 0x0001 [ 3466.345579] sdhci: Argument: 0x | Trn mode: 0x0013 [ 3466.345586] sdhci: Present: 0x01ff0202 | Host ctl: 0x0011 [ 3466.345593] sdhci: Power:0x000f | Blk gap: 0x [ 3466.345600] sdhci: Wake-up: 0x | Clock:0x4007 [ 3466.345607] sdhci: Timeout: 0x000a | Int stat: 0x02008008 [ 3466.345613] sdhci: Int enab: 0x02ff00cb | Sig enab: 0x02ff00cb [ 3466.345620] sdhci: AC12 err: 0x | Slot int: 0x0001 [ 3466.345627] sdhci: Caps: 0x21e832b2 | Max curr: 0x0040 [ 3466.345633] sdhci: ADMA Err: 0x0001 | ADMA Ptr: 0x369dda6c [ 3466.345636] sdhci: === [ 3466.345708] mmc0: Unexpected interrupt 0x0200. [ 3466.345713] sdhci: == REGISTER DUMP == [ 3466.345720] sdhci: Sys addr: 0x | Version: 0x0402 [ 3466.345727] sdhci: Blk size: 0x7008 | Blk cnt: 0x0001 [ 3466.345734] sdhci: Argument: 0x | Trn mode: 0x0013 [ 3466.345740] sdhci: Present: 0x01ff0202 | Host ctl: 0x0011 [ 3466.345747] sdhci: Power:0x000f | Blk gap: 0x [ 3466.345754] sdhci: Wake-up: 0x | Clock:0x4007 [ 3466.345761] sdhci: Timeout: 0x000a | Int stat: 0x02008000 [ 3466.345768] sdhci: Int enab: 0x02ff00cb | Sig enab: 0x02ff00cb [ 3466.345775] sdhci: AC12 err: 0x | Slot int: 0x0001 [ 3466.345782] sdhci: Caps: 0x21e832b2 | Max curr: 0x0040 [ 3466.345789] sdhci: ADMA Err: 0x0001 | ADMA Ptr: 0x0028d5a7 [ 3466.345791] sdhci: === [ 3466.345871] mmc0: Unexpected interrupt 0x0200. [ 3466.345874] sdhci: == REGISTER DUMP == [ 3466.345881] sdhci: Sys addr: 0x | Version: 0x0402 [ 3466.345888] sdhci: Blk size: 0x7008 | Blk cnt: 0x0001 [ 3466.345895] sdhci: Argument: 0x | Trn mode: 0x0013 [ 3466.345901] sdhci: Present: 0x01ff0202 | Host ctl: 0x0011 [ 3466.345908] sdhci: Power:0x000f | Blk gap: 0x [ 3466.345914] sdhci: Wake-up: 0x | Clock:0x4007 [ 3466.345920] sdhci: Timeout: 0x000a | Int stat: 0x02008008 [ 3466.345926] sdhci: Int enab: 0x02ff00cb | Sig enab: 0x02ff00cb [ 3466.345933] sdhci: AC12 err: 0x |
[Kernel-packages] [Bug 777260] Re: i915 module giving error "failed to get supported _DSM functions"
OR using EOL release, and no response for years. ** No longer affects: linux (Fedora) ** Changed in: linux (Ubuntu) Status: Incomplete => Invalid -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/777260 Title: i915 module giving error "failed to get supported _DSM functions" Status in linux package in Ubuntu: Invalid Bug description: Upon a reboot after installing updates in Natty, using the default kernel provided with the distrubution, this error appears during the boot process and causes the system to hang: [drm:intel_dsm_pci_probe] *ERROR* failed to get supported _DSM functions. The system never recovers from this, requiring a hard shut down, and a reinstall only to have it happen again. There is a similar bug filed in RedHat's bug tracking system for the same issue. (https://bugzilla.redhat.com/show_bug.cgi?id=698045) ProblemType: Bug DistroRelease: Ubuntu 11.04 Package: linux-generic 2.6.38.8.22 ProcVersionSignature: Ubuntu 2.6.38-8.42-generic 2.6.38.2 Uname: Linux 2.6.38-8-generic x86_64 AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.23. Architecture: amd64 AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/by-path', '/dev/snd/controlC0', '/dev/snd/hwC0D0', '/dev/snd/hwC0D3', '/dev/snd/pcmC0D0c', '/dev/snd/pcmC0D0p', '/dev/snd/pcmC0D1c', '/dev/snd/pcmC0D1p', '/dev/snd/pcmC0D3p', '/dev/snd/pcmC0D7p', '/dev/snd/pcmC0D8p', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1: CRDA: Error: [Errno 2] No such file or directory Card0.Amixer.info: Card hw:0 'PCH'/'HDA Intel PCH at 0xa090 irq 47' Mixer name : 'Intel CougarPoint HDMI' Components : 'HDA:10134206,106b1c00,00100302 HDA:80862805,80860101,0010' Controls : 34 Simple ctrls : 16 Date: Wed May 4 13:02:18 2011 HibernationDevice: RESUME=UUID=2660eaa6-b8cd-4440-add8-d9e466c350c3 InstallationMedia: Xubuntu 11.04 "Natty Narwhal" - Release amd64 (20110427) MachineType: Apple Inc. MacBookPro8,1 ProcEnviron: SHELL=/bin/bash PATH=(custom, no user) LANG=en_US.UTF-8 ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-2.6.38-8-generic root=UUID=74d533b5-087d-482b-b0ba-3dbc19603544 ro single RelatedPackageVersions: linux-restricted-modules-2.6.38-8-generic N/A linux-backports-modules-2.6.38-8-generic N/A linux-firmware1.52 RfKill: SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 02/07/11 dmi.bios.vendor: Apple Inc. dmi.bios.version: MBP81.88Z.0047.B04.1102071707 dmi.board.asset.tag: Base Board Asset Tag# dmi.board.name: Mac-94245B3640C91C81 dmi.board.vendor: Apple Inc. dmi.board.version: MacBookPro8,1 dmi.chassis.type: 10 dmi.chassis.vendor: Apple Inc. dmi.chassis.version: Mac-94245B3640C91C81 dmi.modalias: dmi:bvnAppleInc.:bvrMBP81.88Z.0047.B04.1102071707:bd02/07/11:svnAppleInc.:pnMacBookPro8,1:pvr1.0:rvnAppleInc.:rnMac-94245B3640C91C81:rvrMacBookPro8,1:cvnAppleInc.:ct10:cvrMac-94245B3640C91C81: dmi.product.name: MacBookPro8,1 dmi.product.version: 1.0 dmi.sys.vendor: Apple Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/777260/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 769045] Re: system freeze on heavy network traffic for more than a few minutes.[ath5k phy0: failed to warm reset the MAC Chip - can't reset hardware (-5)]
** No longer affects: linux (Fedora) -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/769045 Title: system freeze on heavy network traffic for more than a few minutes.[ath5k phy0: failed to warm reset the MAC Chip - can't reset hardware (-5)] Status in Linux: Invalid Status in linux package in Ubuntu: Invalid Bug description: Since upgrading from 10.10 to 11 every time I use a torrent client my system completely freezes and nothing works to bring it back other than a hard reboot. Usually the lights on my keyboard go out but sometimes they're still on and a Ctrl-Alt-BackSpace or Alt-SysReq- REISUB etc. do nothing. I normally use KTorrent so tried upgrading that to the latest version which didn't help, also I tried downloading a new client qBittorrent but that didn't help either. The crash/freeze is very reliable and happens about 1-4 minutes after turning the client on (with active torrents, if they're all inactive it seems ok). /var/crashes doesn't have any reports related to the freeze. If you need any logs to determine what's going on let me know where to look and I'll add them. If I don't run any torrent clients then other than some compiz problems my machine is stable and can happily run all day. Before I upgraded it was totally stable and never froze - I've not changed any network or torrent client/router config since then. Any ideas? To manage notifications about this bug go to: https://bugs.launchpad.net/linux/+bug/769045/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 603445] Re: Ricoh SD controller (1180:e822) not working: unknown version
Status changed to 'Confirmed' because the bug affects multiple users. ** Changed in: linux (Ubuntu) Status: New => Confirmed -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/603445 Title: Ricoh SD controller (1180:e822) not working: unknown version Status in linux package in Ubuntu: Invalid Bug description: Also tested on Maverick alpha 2. The laptop is a Dell E5410. This SD reader does not work. Upon insertion of a SD card this shows in dmesg: [ 3466.345329] mmc0: Unexpected interrupt 0x0200. [ 3466.345335] sdhci: == REGISTER DUMP == [ 3466.345343] sdhci: Sys addr: 0x | Version: 0x0402 [ 3466.345350] sdhci: Blk size: 0x7008 | Blk cnt: 0x0001 [ 3466.345357] sdhci: Argument: 0x | Trn mode: 0x0013 [ 3466.345364] sdhci: Present: 0x01ff0202 | Host ctl: 0x0011 [ 3466.345371] sdhci: Power:0x000f | Blk gap: 0x [ 3466.345378] sdhci: Wake-up: 0x | Clock:0x4007 [ 3466.345385] sdhci: Timeout: 0x000a | Int stat: 0x02008000 [ 3466.345392] sdhci: Int enab: 0x02ff00cb | Sig enab: 0x02ff00cb [ 3466.345399] sdhci: AC12 err: 0x | Slot int: 0x0001 [ 3466.345406] sdhci: Caps: 0x21e832b2 | Max curr: 0x0040 [ 3466.345413] sdhci: ADMA Err: 0x0001 | ADMA Ptr: 0x369dd8d8 [ 3466.345415] sdhci: === [ 3466.345443] mmc0: Unexpected interrupt 0x0200. [ 3466.345448] sdhci: == REGISTER DUMP == [ 3466.345455] sdhci: Sys addr: 0x | Version: 0x0402 [ 3466.345462] sdhci: Blk size: 0x7008 | Blk cnt: 0x0001 [ 3466.345469] sdhci: Argument: 0x | Trn mode: 0x0013 [ 3466.345475] sdhci: Present: 0x01ff0202 | Host ctl: 0x0011 [ 3466.345482] sdhci: Power:0x000f | Blk gap: 0x [ 3466.345490] sdhci: Wake-up: 0x | Clock:0x4007 [ 3466.345496] sdhci: Timeout: 0x000a | Int stat: 0x02008008 [ 3466.345503] sdhci: Int enab: 0x02ff00cb | Sig enab: 0x02ff00cb [ 3466.345510] sdhci: AC12 err: 0x | Slot int: 0x0001 [ 3466.345517] sdhci: Caps: 0x21e832b2 | Max curr: 0x0040 [ 3466.345524] sdhci: ADMA Err: 0x0001 | ADMA Ptr: 0x369dd9a4 [ 3466.345527] sdhci: === [ 3466.345556] mmc0: Unexpected interrupt 0x0200. [ 3466.345560] sdhci: == REGISTER DUMP == [ 3466.345566] sdhci: Sys addr: 0x | Version: 0x0402 [ 3466.345572] sdhci: Blk size: 0x7008 | Blk cnt: 0x0001 [ 3466.345579] sdhci: Argument: 0x | Trn mode: 0x0013 [ 3466.345586] sdhci: Present: 0x01ff0202 | Host ctl: 0x0011 [ 3466.345593] sdhci: Power:0x000f | Blk gap: 0x [ 3466.345600] sdhci: Wake-up: 0x | Clock:0x4007 [ 3466.345607] sdhci: Timeout: 0x000a | Int stat: 0x02008008 [ 3466.345613] sdhci: Int enab: 0x02ff00cb | Sig enab: 0x02ff00cb [ 3466.345620] sdhci: AC12 err: 0x | Slot int: 0x0001 [ 3466.345627] sdhci: Caps: 0x21e832b2 | Max curr: 0x0040 [ 3466.345633] sdhci: ADMA Err: 0x0001 | ADMA Ptr: 0x369dda6c [ 3466.345636] sdhci: === [ 3466.345708] mmc0: Unexpected interrupt 0x0200. [ 3466.345713] sdhci: == REGISTER DUMP == [ 3466.345720] sdhci: Sys addr: 0x | Version: 0x0402 [ 3466.345727] sdhci: Blk size: 0x7008 | Blk cnt: 0x0001 [ 3466.345734] sdhci: Argument: 0x | Trn mode: 0x0013 [ 3466.345740] sdhci: Present: 0x01ff0202 | Host ctl: 0x0011 [ 3466.345747] sdhci: Power:0x000f | Blk gap: 0x [ 3466.345754] sdhci: Wake-up: 0x | Clock:0x4007 [ 3466.345761] sdhci: Timeout: 0x000a | Int stat: 0x02008000 [ 3466.345768] sdhci: Int enab: 0x02ff00cb | Sig enab: 0x02ff00cb [ 3466.345775] sdhci: AC12 err: 0x | Slot int: 0x0001 [ 3466.345782] sdhci: Caps: 0x21e832b2 | Max curr: 0x0040 [ 3466.345789] sdhci: ADMA Err: 0x0001 | ADMA Ptr: 0x0028d5a7 [ 3466.345791] sdhci: === [ 3466.345871] mmc0: Unexpected interrupt 0x0200. [ 3466.345874] sdhci: == REGISTER DUMP == [ 3466.345881] sdhci: Sys addr: 0x | Version: 0x0402 [ 3466.345888] sdhci: Blk size: 0x7008 | Blk cnt: 0x0001 [ 3466.345895] sdhci: Argument: 0x | Trn mode: 0x0013 [ 3466.345901] sdhci: Present: 0x01ff0202 | Host ctl: 0x0011 [ 3466.345908] sdhci: Power:0x000f | Blk gap: 0x [ 3466.345914] sdhci: Wake-up: 0x | Clock:0x4007 [ 3466.345920] sdhci: Timeout: 0x000a | Int stat: 0x02008008 [ 3466.345926] sdhci: Int enab: 0x02ff00cb | Sig enab:
[Kernel-packages] [Bug 791833] Re: Dell ST2220T Monitor responds to touch only on warm boot from windows
OR using EOL release, and no response for years. ** No longer affects: linux (Ubuntu Oneiric) ** No longer affects: linux (Ubuntu) ** Package changed: linux (Fedora) => linux (Ubuntu) ** Changed in: linux (Ubuntu) Importance: Medium => Undecided ** Changed in: linux (Ubuntu) Status: Fix Released => New ** Changed in: linux (Ubuntu) Remote watch: Red Hat Bugzilla #703118 => None ** Changed in: linux (Ubuntu) Status: New => Invalid -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/791833 Title: Dell ST2220T Monitor responds to touch only on warm boot from windows Status in OEM Priority Project: Invalid Status in OEM Priority Project oneiric series: Invalid Status in linux package in Ubuntu: Invalid Bug description: Dell ST2220T Monitors have been purchased. On first install, the touchscreen worked pretty well. But it started to behave weird after restarts. The behaviour is as follows: On cold boot touch never works. But once going to Windows 7 and coming back after a warm boot, the touch works perfectly. From now, it works until there are no cold boots. Once cold boot happens into Ubuntu, touch stops working. This behaviour has been consistent. I tried to put usbhid.quirks with : : 0x40 as mentioned here http://ubuntuforums.org/showthread.php?p=10287057#post10287057 but it did not work. This is on Ubuntu Natty. A patch from Red Hat bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=703118 seems to help the issue significantly, but, a few touch features (such as "click") seem to still need some work. The patch doesn't seem to be upstream yet in the mainline kernel. SRU Request: Impact: Customer currently has 150 of these monitors with plans to expand to 1,500 next year and 10,000 in the year after that. Getting these devices to work with ubuntu will help out a lot with cost reduction for the customer. Patch: See bugzilla reference above. Steps to reproduce: 1) Install 11.04 (In this case the system was dual-booted with Windows 7) 2) Without the patch, the touchscreen only seems to work if the machine is warm-rebooted from Windows. The touch features don't work at all if the system is cold-booted into Ubuntu. 3) With the patch, the touchscreen appears to work with cold boots and warm reboots, but, 'click' features on the touchscreen still need to be applied. TEST CASE: Apply the patch to the kernel, then test the touchscreen after warm reboots and cold boots to ensure that the touchscreen is fully functional. Customer has agreed to assist with testing, etc. Regression Potential: Unknown at this time. Patch appears to be pretty trivial and isolated so regression potential seems to be pretty low. To manage notifications about this bug go to: https://bugs.launchpad.net/oem-priority/+bug/791833/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 732243] Re: Acer Logitech, Inc. Orbicam fails to start working.
OR using EOL release, and no response for years. ** No longer affects: linux (Ubuntu) ** Package changed: linux (Fedora) => linux (Ubuntu) ** Changed in: linux (Ubuntu) Importance: Medium => Undecided ** Changed in: linux (Ubuntu) Status: Won't Fix => New ** Changed in: linux (Ubuntu) Remote watch: Red Hat Bugzilla #643710 => None ** Changed in: linux (Ubuntu) Status: New => Invalid -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/732243 Title: Acer Logitech, Inc. Orbicam fails to start working. Status in linux package in Ubuntu: Invalid Bug description: Problem description: Logitech, Inc. Orbicam (ID 046d:0896) doesn't work with Cheese (green led on cam doesn't light up and no images appear) unless we run Cheese multiple consecutive times. Webcam doesn't work with Skype too (no images and led turned off). This problem has started when Ubuntu 10.10 was installed (kernel 2.6.35-27-generic - 64 bits). Webcam was working at Ubuntu 10.04 (all kernel versions released until Mar-08 / 2011). Ubuntu version: Distributor ID: Ubuntu Description: Ubuntu 10.10 Release: 10.10 Codename: maverick Kernel version: Linux 2.6.35-27-generic #48-Ubuntu SMP Tue Feb 22 20:25:46 UTC 2011 x86_64 GNU/Linux Steps to reproduce the bug: (With Cheese) 1. run Cheese - green led on cam doesn't light up and a black screen appears instead of the image. 2. close Cheese and start it again. 3. If the cam still doesn't work, repeat step 2. (With Skype 2.1.0.81) 1. run Skype (/usr/bin/skype-wrapper) 2. Log in as a valid user. 3. At the main menu, click "Options", and then click the "Video" tab on the left 4. Enable Skype Video. Check the box next to "Enable Skype Video." 5. Open the pull-down menu of devices. Select the device (sometimes it appears as /dev/video0 and sometimes as /dev/video1). 6. Click at the "Test" webcam button. 7. Green led on cam doesn't light up and a black screen appears instead of the image. Expected results: Cam led lights up and image appears when Cheese is started. Cam led lights up and image appears in the web cam test at Skype. Additional info: lsusb output: Bus 005 Device 002: ID 062a:0001 Creative Labs Notebook Optical Mouse Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 017: ID 046d:0896 Logitech, Inc. OrbiCam Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub /var/log/messages when I tried to run Cheese four times and the cam worked only at the last (fourth) attempt: Mar 9 17:04:26 aspire kernel: [ 6472.857266] usb 1-4: USB disconnect, address 17 Mar 9 17:04:26 aspire kernel: [ 6472.857342] gspca: video0 disconnect Mar 9 17:04:27 aspire kernel: [ 6474.512285] gspca: set alt 0 err -19 Mar 9 17:04:27 aspire kernel: [ 6474.512294] gspca: usb_submit_urb alt 7 err -19 Mar 9 17:04:28 aspire kernel: [ 6474.790146] usb 1-4: new high speed USB device using ehci_hcd and address 18 Mar 9 17:04:28 aspire kernel: [ 6474.969126] gspca: probing 046d:0896 Mar 9 17:04:28 aspire kernel: [ 6474.969133] vc032x: Sensor PO Mar 9 17:04:28 aspire kernel: [ 6474.971180] gspca: video1 created Mar 9 17:04:36 aspire kernel: [ 6482.628464] gspca: video0 released Mar 9 17:06:51 aspire kernel: [ 6618.082332] usb 1-4: USB disconnect, address 18 Mar 9 17:06:51 aspire kernel: [ 6618.082410] gspca: video1 disconnect Mar 9 17:06:53 aspire kernel: [ 6619.742700] gspca: set alt 0 err -19 Mar 9 17:06:53 aspire kernel: [ 6619.742710] gspca: usb_submit_urb alt 7 err -19 Mar 9 17:06:53 aspire kernel: [ 6620.020143] usb 1-4: new high speed USB device using ehci_hcd and address 19 Mar 9 17:06:53 aspire kernel: [ 6620.209951] gspca: probing 046d:0896 Mar 9 17:06:53 aspire kernel: [ 6620.209958] vc032x: Sensor PO Mar 9 17:06:53 aspire kernel: [ 6620.214951] gspca: video0 created Mar 9 17:07:31 aspire kernel: [ 6657.839792] gspca: video1 released Mar 9 17:07:44 aspire kernel: [ 6670.992411] usb 1-4: USB disconnect, address 19 Mar 9 17:07:44 aspire kernel: [ 6670.992481] gspca: video0 disconnect Mar 9 17:07:46 aspire kernel: [ 6672.650173] gspca: set alt 0 err -19 Mar 9 17:07:46 aspire kernel: [ 6672.650183] gspca: usb_submit_urb alt 7 err -19 Mar 9 17:07:46 aspire kernel: [ 6672.932615] usb 1-4: new high speed USB device using ehci_hcd and address 20 Mar 9 17:07:46 aspire kernel: [ 6673.105526] gspca: probing 046d:0896 Mar 9 17:07:46 aspire kernel: [ 6673.105533] vc032x: Sensor PO Mar 9 17:07:46 aspire kernel: [ 6673.107520] gspca: video1 created Mar 9 17:07:51 aspire kernel: [
[Kernel-packages] [Bug 603445] Re: Ricoh SD controller (1180:e822) not working: unknown version
** Project changed: linux => linux (Ubuntu) ** Changed in: linux (Ubuntu) Status: New => Invalid -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/603445 Title: Ricoh SD controller (1180:e822) not working: unknown version Status in linux package in Ubuntu: Invalid Bug description: Also tested on Maverick alpha 2. The laptop is a Dell E5410. This SD reader does not work. Upon insertion of a SD card this shows in dmesg: [ 3466.345329] mmc0: Unexpected interrupt 0x0200. [ 3466.345335] sdhci: == REGISTER DUMP == [ 3466.345343] sdhci: Sys addr: 0x | Version: 0x0402 [ 3466.345350] sdhci: Blk size: 0x7008 | Blk cnt: 0x0001 [ 3466.345357] sdhci: Argument: 0x | Trn mode: 0x0013 [ 3466.345364] sdhci: Present: 0x01ff0202 | Host ctl: 0x0011 [ 3466.345371] sdhci: Power:0x000f | Blk gap: 0x [ 3466.345378] sdhci: Wake-up: 0x | Clock:0x4007 [ 3466.345385] sdhci: Timeout: 0x000a | Int stat: 0x02008000 [ 3466.345392] sdhci: Int enab: 0x02ff00cb | Sig enab: 0x02ff00cb [ 3466.345399] sdhci: AC12 err: 0x | Slot int: 0x0001 [ 3466.345406] sdhci: Caps: 0x21e832b2 | Max curr: 0x0040 [ 3466.345413] sdhci: ADMA Err: 0x0001 | ADMA Ptr: 0x369dd8d8 [ 3466.345415] sdhci: === [ 3466.345443] mmc0: Unexpected interrupt 0x0200. [ 3466.345448] sdhci: == REGISTER DUMP == [ 3466.345455] sdhci: Sys addr: 0x | Version: 0x0402 [ 3466.345462] sdhci: Blk size: 0x7008 | Blk cnt: 0x0001 [ 3466.345469] sdhci: Argument: 0x | Trn mode: 0x0013 [ 3466.345475] sdhci: Present: 0x01ff0202 | Host ctl: 0x0011 [ 3466.345482] sdhci: Power:0x000f | Blk gap: 0x [ 3466.345490] sdhci: Wake-up: 0x | Clock:0x4007 [ 3466.345496] sdhci: Timeout: 0x000a | Int stat: 0x02008008 [ 3466.345503] sdhci: Int enab: 0x02ff00cb | Sig enab: 0x02ff00cb [ 3466.345510] sdhci: AC12 err: 0x | Slot int: 0x0001 [ 3466.345517] sdhci: Caps: 0x21e832b2 | Max curr: 0x0040 [ 3466.345524] sdhci: ADMA Err: 0x0001 | ADMA Ptr: 0x369dd9a4 [ 3466.345527] sdhci: === [ 3466.345556] mmc0: Unexpected interrupt 0x0200. [ 3466.345560] sdhci: == REGISTER DUMP == [ 3466.345566] sdhci: Sys addr: 0x | Version: 0x0402 [ 3466.345572] sdhci: Blk size: 0x7008 | Blk cnt: 0x0001 [ 3466.345579] sdhci: Argument: 0x | Trn mode: 0x0013 [ 3466.345586] sdhci: Present: 0x01ff0202 | Host ctl: 0x0011 [ 3466.345593] sdhci: Power:0x000f | Blk gap: 0x [ 3466.345600] sdhci: Wake-up: 0x | Clock:0x4007 [ 3466.345607] sdhci: Timeout: 0x000a | Int stat: 0x02008008 [ 3466.345613] sdhci: Int enab: 0x02ff00cb | Sig enab: 0x02ff00cb [ 3466.345620] sdhci: AC12 err: 0x | Slot int: 0x0001 [ 3466.345627] sdhci: Caps: 0x21e832b2 | Max curr: 0x0040 [ 3466.345633] sdhci: ADMA Err: 0x0001 | ADMA Ptr: 0x369dda6c [ 3466.345636] sdhci: === [ 3466.345708] mmc0: Unexpected interrupt 0x0200. [ 3466.345713] sdhci: == REGISTER DUMP == [ 3466.345720] sdhci: Sys addr: 0x | Version: 0x0402 [ 3466.345727] sdhci: Blk size: 0x7008 | Blk cnt: 0x0001 [ 3466.345734] sdhci: Argument: 0x | Trn mode: 0x0013 [ 3466.345740] sdhci: Present: 0x01ff0202 | Host ctl: 0x0011 [ 3466.345747] sdhci: Power:0x000f | Blk gap: 0x [ 3466.345754] sdhci: Wake-up: 0x | Clock:0x4007 [ 3466.345761] sdhci: Timeout: 0x000a | Int stat: 0x02008000 [ 3466.345768] sdhci: Int enab: 0x02ff00cb | Sig enab: 0x02ff00cb [ 3466.345775] sdhci: AC12 err: 0x | Slot int: 0x0001 [ 3466.345782] sdhci: Caps: 0x21e832b2 | Max curr: 0x0040 [ 3466.345789] sdhci: ADMA Err: 0x0001 | ADMA Ptr: 0x0028d5a7 [ 3466.345791] sdhci: === [ 3466.345871] mmc0: Unexpected interrupt 0x0200. [ 3466.345874] sdhci: == REGISTER DUMP == [ 3466.345881] sdhci: Sys addr: 0x | Version: 0x0402 [ 3466.345888] sdhci: Blk size: 0x7008 | Blk cnt: 0x0001 [ 3466.345895] sdhci: Argument: 0x | Trn mode: 0x0013 [ 3466.345901] sdhci: Present: 0x01ff0202 | Host ctl: 0x0011 [ 3466.345908] sdhci: Power:0x000f | Blk gap: 0x [ 3466.345914] sdhci: Wake-up: 0x | Clock:0x4007 [ 3466.345920] sdhci: Timeout: 0x000a | Int stat: 0x02008008 [ 3466.345926] sdhci: Int enab: 0x02ff00cb | Sig enab: 0x02ff00cb [ 3466.345933]
[Kernel-packages] [Bug 772834] Re: Asus U43F with 11.04 freeze on suspend
OR using EOL release, and no response for years. ** No longer affects: linux (Ubuntu) ** Package changed: linux (Fedora) => linux (Ubuntu) ** Changed in: linux (Ubuntu) Importance: High => Undecided ** Changed in: linux (Ubuntu) Status: Won't Fix => New ** Changed in: linux (Ubuntu) Remote watch: Red Hat Bugzilla #697800 => None ** Changed in: linux (Ubuntu) Status: New => Invalid -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/772834 Title: Asus U43F with 11.04 freeze on suspend Status in linux package in Ubuntu: Invalid Bug description: Hi, I have an Asus U43F. And the problem that I'm having is that when I close the laptop or click on Suspend the computer goes into a black screen and freezes there, I can still hear the fan and the only way to get it working again is by doing a hard reset. --- AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.23. Architecture: i386 ArecordDevices: List of CAPTURE Hardware Devices card 0: Intel [HDA Intel], device 0: ALC269VB Analog [ALC269VB Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: mandojm1332 F pulseaudio CRDA: Error: [Errno 2] No such file or directory Card0.Amixer.info: Card hw:0 'Intel'/'HDA Intel at 0xf540 irq 48' Mixer name : 'Intel IbexPeak HDMI' Components : 'HDA:10ec0269,10431213,00100100 HDA:80862804,10431213,0010' Controls : 19 Simple ctrls : 10 DistroRelease: Ubuntu 11.04 HibernationDevice: RESUME=UUID=9d0e68e9-1003-459f-b7bc-3fb54dec1e94 InstallationMedia: Ubuntu 11.04 "Natty Narwhal" - Release i386 (20110427.1) MachineType: ASUSTeK Computer Inc. U43F Package: linux (not installed) ProcEnviron: LANGUAGE=en_US:en LANG=en_US.UTF-8 SHELL=/bin/bash ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-2.6.38-8-generic-pae root=UUID=df4fb911-730b-4a3c-96d2-d870765717fa ro quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 2.6.38-8.42-generic-pae 2.6.38.2 RelatedPackageVersions: linux-restricted-modules-2.6.38-8-generic-pae N/A linux-backports-modules-2.6.38-8-generic-pae N/A linux-firmware1.52 RfKill: 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no Tags: natty running-unity Uname: Linux 2.6.38-8-generic-pae i686 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm admin cdrom dialout lpadmin plugdev sambashare dmi.bios.date: 05/26/2010 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 210 dmi.board.asset.tag: ATN12345678901234567 dmi.board.name: U43 dmi.board.vendor: PEGATRON CORPORATION dmi.board.version: 1.0 dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: PEGATRON Computer Inc. dmi.chassis.version: 1.0 dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr210:bd05/26/2010:svnASUSTeKComputerInc.:pnU43F:pvr1.0:rvnPEGATRONCORPORATION:rnU43:rvr1.0:cvnPEGATRONComputerInc.:ct10:cvr1.0: dmi.product.name: U43F dmi.product.version: 1.0 dmi.sys.vendor: ASUSTeK Computer Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/772834/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 878800] Re: 802.11n causes connection failures
OR using EOL release, and no response for years. ** No longer affects: linux (Fedora) ** Changed in: linux (Ubuntu) Status: Incomplete => Invalid -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/878800 Title: 802.11n causes connection failures Status in linux package in Ubuntu: Invalid Bug description: While connected to a 802.11n network, network-manager says I am indeed connected, but apparently I am not. Trying to ping the router, access the internet or somehow use the network doesn't work. Restartint the network-manager service, though, fixes it. The problem is that I have to do this EVERY time I reboot or resume from suspend. I found this bug report[1] at Red Hat that seems to be exactly what I'm experiencing. Cry. [1]: https://bugzilla.redhat.com/show_bug.cgi?id=587825 http://www.thinkwiki.org/wiki/Intel_Centrino_Wireless-N_1000 WORKAROUND: adding the 11n_disable option to modprobe "solves" the problem. ProblemType: Bug DistroRelease: Ubuntu 11.10 Package: linux-image (not installed) ProcVersionSignature: Ubuntu 3.0.0-12.20-generic-pae 3.0.4 Uname: Linux 3.0.0-12-generic-pae i686 AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.24. ApportVersion: 1.23-0ubuntu3 Architecture: i386 ArecordDevices: List of CAPTURE Hardware Devices card 0: Intel [HDA Intel], device 0: CONEXANT Analog [CONEXANT Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: alexander 1854 F pulseaudio CRDA: Error: [Errno 2] Ingen slik fil eller filkatalog Card0.Amixer.info: Card hw:0 'Intel'/'HDA Intel at 0xf070 irq 43' Mixer name : 'Intel IbexPeak HDMI' Components : 'HDA:14f15066,17aa21c5,00100302 HDA:80862804,80860101,0010' Controls : 12 Simple ctrls : 6 Card29.Amixer.info: Card hw:29 'ThinkPadEC'/'ThinkPad Console Audio Control at EC reg 0x30, fw 84HT23WW-1.09' Mixer name : 'ThinkPad EC 84HT23WW-1.09' Components : '' Controls : 1 Simple ctrls : 1 Card29.Amixer.values: Simple mixer control 'Console',0 Capabilities: pswitch pswitch-joined penum Playback channels: Mono Mono: Playback [off] Date: Thu Oct 20 13:50:49 2011 EcryptfsInUse: Yes InstallationMedia: Ubuntu 11.10 "Oneiric Ocelot" - Release i386 (20111012) MachineType: LENOVO 02173CG ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.0.0-12-generic-pae root=UUID=f95b26da-c0d8-4f47-bb5b-73448723e340 ro quiet splash vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-3.0.0-12-generic-pae N/A linux-backports-modules-3.0.0-12-generic-pae N/A linux-firmware1.60 SourcePackage: linux StagingDrivers: mei UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 07/15/2011 dmi.bios.vendor: LENOVO dmi.bios.version: 84ET27WW (1.11 ) dmi.board.name: 02173CG dmi.board.vendor: LENOVO dmi.board.version: Not Available dmi.chassis.asset.tag: No Asset Information dmi.chassis.type: 10 dmi.chassis.vendor: LENOVO dmi.chassis.version: Not Available dmi.modalias: dmi:bvnLENOVO:bvr84ET27WW(1.11):bd07/15/2011:svnLENOVO:pn02173CG:pvrThinkPadEdge:rvnLENOVO:rn02173CG:rvrNotAvailable:cvnLENOVO:ct10:cvrNotAvailable: dmi.product.name: 02173CG dmi.product.version: ThinkPad Edge dmi.sys.vendor: LENOVO To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/878800/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 847187] [NEW] [HP Pavilion dv7-6104eg Entertainment Notebook PC] Backlight control doesn't work
You have been subscribed to a public bug: Backlight control on HP Pavilion dv7 6104eg notebook doesn't work using function keys or Gnome power management applet. I found a patch, that should solve the problem: http://www.edgrochowski.com/articles/backlight.htm (haven't tried it yet) lsmod: Module Size Used by parport_pc 36959 0 ppdev 17113 0 rfcomm 47694 8 binfmt_misc17565 1 sco18187 2 bnep 18308 2 l2cap 53570 16 rfcomm,bnep vboxnetadp 13340 0 vboxnetflt 28297 0 vboxdrv 252684 2 vboxnetadp,vboxnetflt snd_hda_codec_hdmi 28167 1 snd_hda_codec_idt 71137 1 arc4 12529 2 joydev 17606 0 uvcvideo 72195 0 usbhid 46956 0 iwlagn333716 0 snd_hda_intel 33176 4 snd_hda_codec 103804 3 snd_hda_codec_hdmi,snd_hda_codec_idt,snd_hda_intel snd_hwdep 13604 1 snd_hda_codec iwlcore 167502 1 iwlagn snd_pcm96391 4 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec videodev 82052 1 uvcvideo i915 515121 3 snd_seq_midi 13324 0 snd_rawmidi30486 1 snd_seq_midi btusb 18600 2 snd_seq_midi_event 14899 1 snd_seq_midi bluetooth 72320 9 rfcomm,sco,bnep,l2cap,btusb snd_seq61621 2 snd_seq_midi,snd_seq_midi_event snd_timer 29602 2 snd_pcm,snd_seq v4l2_compat_ioctl3217078 1 videodev snd_seq_device 14462 3 snd_seq_midi,snd_rawmidi,snd_seq hid91020 1 usbhid hp_wmi 13706 0 sparse_keymap 13898 1 hp_wmi mac80211 294370 2 iwlagn,iwlcore psmouse73535 0 snd67382 17 snd_hda_codec_hdmi,snd_hda_codec_idt,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device drm_kms_helper 42136 1 i915 serio_raw 13166 0 cfg80211 178528 3 iwlagn,iwlcore,mac80211 rts_pstor 440614 0 drm 227534 4 i915,drm_kms_helper soundcore 12680 1 snd snd_page_alloc 18529 2 snd_hda_intel,snd_pcm i2c_algo_bit 13400 1 i915 video 19438 1 i915 hp_accel 21880 0 lis3lv02d 19893 1 hp_accel max665014324 0 input_polldev 14007 1 lis3lv02d coretemp 13490 0 lp 17825 0 parport46458 3 parport_pc,ppdev,lp ahci 25951 2 xhci_hcd 77643 0 libahci26642 1 ahci r8169 48022 0 --- AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.23. Architecture: amd64 ArecordDevices: List of CAPTURE Hardware Devices card 0: PCH [HDA Intel PCH], device 0: STAC92xx Analog [STAC92xx Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: matthias 1587 F pulseaudio CRDA: Error: [Errno 2] No such file or directory Card0.Amixer.info: Card hw:0 'PCH'/'HDA Intel PCH at 0xc750 irq 53' Mixer name : 'Intel CougarPoint HDMI' Components : 'HDA:111d7605,103c3389,00100105 HDA:80862805,80860101,0010' Controls : 18 Simple ctrls : 10 DistroRelease: Ubuntu 11.04 InstallationMedia: Ubuntu 11.04 "Natty Narwhal" - Release amd64 (20110427.1) MachineType: Hewlett-Packard HP Pavilion dv7 Notebook PC Package: linux (not installed) ProcEnviron: LANGUAGE=en_US:en LANG=en_US.UTF-8 SHELL=/bin/zsh ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-2.6.38-11-generic root=UUID=6562386e-524b-41be-8383-6e1944f15f1c ro quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 2.6.38-11.48-generic 2.6.38.8 RelatedPackageVersions: linux-restricted-modules-2.6.38-11-generic N/A linux-backports-modules-2.6.38-11-generic N/A linux-firmware 1.52 StagingDrivers: rts_pstor Tags: natty staging Uname: Linux 2.6.38-11-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm admin cdrom dialout lpadmin plugdev sambashare dmi.bios.date: 07/20/2011 dmi.bios.vendor: Hewlett-Packard dmi.bios.version: F.1A dmi.board.asset.tag: Base Board Asset Tag dmi.board.name: 3389 dmi.board.vendor: Hewlett-Packard dmi.board.version: 10.31 dmi.chassis.asset.tag: Chassis Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: Hewlett-Packard dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnHewlett-Packard:bvrF.1A:bd07/20/2011:svnHewlett-Packard:pnHPPaviliondv7NotebookPC:pvr058D11244620001620100:rvnHewlett-Packard:rn3389:rvr10.31:cvnHewlett-Packard:ct10:cvrChassisVersion: dmi.product.name: HP Pavilion dv7 Notebook PC dmi.product.version: 058D11244620001620100 dmi.sys.vendor: Hewlett-Packard
[Kernel-packages] [Bug 1723680] Re: GPU Hang in Xorg rcs0 drm/i915
** Tags added: kernel-bug-reported-upstream -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1723680 Title: GPU Hang in Xorg rcs0 drm/i915 Status in linux package in Ubuntu: Triaged Status in linux source package in Zesty: Triaged Status in linux source package in Artful: Triaged Bug description: Distributor ID: Ubuntu Description: Ubuntu Artful Aardvark (development branch) Release: 17.10 Codename: artful When using linux kernel linux-image-4.13.0-12-generic to linux- image-4.13.0-16-generic Xorg fails to start with kernel error messages below. Kernel boots and displays messages allows for GUI to enter disk encryption key then tries to start Xorg login. Shows blank screen, sometimes part of login dialog. Then hangs and goes blank usually showing the low graphics mode error screen from Xorg and no functionality after a while. Can ctrl+alt+f1 to console. Using linux-image-4.10.0-35-generic everything works as expected. System worked without issue with Ubuntu 17.04 Kernel error messages: [ 43.836641] [drm] GPU HANG: ecode 8:0:0x00df, in Xorg [1027], reason: Hang on rcs0, action: reset [ 43.836645] [drm] GPU hangs can indicate a bug anywhere in the entire gfx stack, including userspace. [ 43.836646] [drm] Please file a _new_ bug report on bugs.freedesktop.org against DRI -> DRM/Intel [ 43.836647] [drm] drm/i915 developers can then reassign to the right component if it's not a kernel issue. [ 43.836648] [drm] The gpu crash dump is required to analyze gpu hangs, so please always attach it. [ 43.836649] [drm] GPU crash dump saved to /sys/class/drm/card0/error [ 43.836718] drm/i915: Resetting chip after gpu hang [ 55.812149] drm/i915: Resetting chip after gpu hang [ 63.840645] drm/i915: Resetting chip after gpu hang [ 71.836614] drm/i915: Resetting chip after gpu hang [ 79.836882] drm/i915: Resetting chip after gpu hang [ 88.828508] drm/i915: Resetting chip after gpu hang have tried kernel parameter intel_iommu=off, intel_iommu=igfx_off, i915.enable_rc6=0 with no better results. lshw, dmesg and card0/error file attached. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1723680/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 764003] [NEW] vodafone k3805-z requires "ifconfig usb0 -arp" prior to connecting to achieve connectivity
You have been subscribed to a public bug: Binary package hint: modemmanager Vodafone 3g pen k3805-z requires "ifconfig usb0 -arp" prior to connecting to achieve connectivity. It appears as if everything is blocked unless arp is disabled. ProblemType: Bug DistroRelease: Ubuntu 11.04 Package: modemmanager 0.4+git.20110124t203624.00b6cce-2ubuntu1 ProcVersionSignature: Ubuntu 2.6.38-8.42-generic 2.6.38.2 Uname: Linux 2.6.38-8-generic i686 Architecture: i386 Date: Sun Apr 17 22:48:16 2011 InstallationMedia: Ubuntu 10.10 "Maverick Meerkat" - Release i386 (20101007) ProcEnviron: LANGUAGE=en LANG=pt_PT.UTF-8 LC_MESSAGES=en_US.UTF-8 SHELL=/bin/bash SourcePackage: modemmanager UpgradeStatus: Upgraded to natty on 2011-04-07 (10 days ago) --- AcpiTables: Error: command ['gksu', '-D', 'Apport', '--', '/usr/share/apport/dump_acpi_tables.py'] failed with exit code 3: Error copying '/home/ubuntu/.Xauthority' to '/tmp/libgksu-QrpIwZ': No such file or directory AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.24. Architecture: i386 AudioDevicesInUse: Cannot stat file /proc/3214/fd/11: Stale NFS file handle Cannot stat file /proc/3214/fd/12: Stale NFS file handle Cannot stat file /proc/3955/fd/32: Stale NFS file handle USERPID ACCESS COMMAND /dev/snd/controlC0: ubuntu 3194 F pulseaudio CRDA: Error: [Errno 2] No such file or directory Card0.Amixer.info: Card hw:0 'Intel'/'HDA Intel at 0xf860 irq 47' Mixer name : 'Realtek ALC268' Components : 'HDA:10ec0268,103c30cc,0013 HDA:10573055,10573055,00100700' Controls : 20 Simple ctrls : 12 DistroRelease: Ubuntu 11.10 LiveMediaBuild: Ubuntu 11.10 "Oneiric Ocelot" - Alpha i386 (20110531.1) MachineType: Hewlett-Packard HP Pavilion dv6500 Notebook PC Package: linux (not installed) ProcEnviron: LANG=en_US.UTF-8 SHELL=/bin/bash ProcKernelCmdLine: BOOT_IMAGE=(loop)/casper/vmlinuz boot=casper iso-scan/filename=/ISOtest/oneiric-desktop-i386.iso ProcVersionSignature: Ubuntu 2.6.39-3.10-generic 2.6.39 RelatedPackageVersions: linux-restricted-modules-2.6.39-3-generic N/A linux-backports-modules-2.6.39-3-generic N/A linux-firmware1.53 Tags: oneiric unity-2d Uname: Linux 2.6.39-3-generic i686 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm admin cdrom dialout lpadmin plugdev sambashare dmi.bios.date: 11/25/2008 dmi.bios.vendor: Hewlett-Packard dmi.bios.version: F.59 dmi.board.name: 30CC dmi.board.vendor: Quanta dmi.board.version: 79.2E dmi.chassis.type: 10 dmi.chassis.vendor: Quanta dmi.chassis.version: N/A dmi.modalias: dmi:bvnHewlett-Packard:bvrF.59:bd11/25/2008:svnHewlett-Packard:pnHPPaviliondv6500NotebookPC:pvrRev1:rvnQuanta:rn30CC:rvr79.2E:cvnQuanta:ct10:cvrN/A: dmi.product.name: HP Pavilion dv6500 Notebook PC dmi.product.version: Rev 1 dmi.sys.vendor: Hewlett-Packard ** Affects: linux (Ubuntu) Importance: Undecided Status: New ** Tags: apport-bug apport-collected bot-stop-nagging i386 kernel-net natty needs-upstream-testing oneiric running-unity unity-2d -- vodafone k3805-z requires "ifconfig usb0 -arp" prior to connecting to achieve connectivity https://bugs.launchpad.net/bugs/764003 You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 880648] [NEW] 8086:0084 wifi iwlagn fails to authenticate after wake from suspend
You have been subscribed to a public bug: Upgraded to 11.10 from 11.04 today. Now when resume from suspend, wifi fails to reconnect saying waiting for authentication. If I use the last kernel from 11.04, 2.4.39 instead of the new 3.0.0, it still works OK. After wake from suspend, if using ethernet it works OK. lspci -v 0d:00.0 Network controller: Intel Corporation Centrino Wireless-N 1000 Subsystem: Intel Corporation Centrino Wireless-N 1000 BGN Flags: bus master, fast devsel, latency 0, IRQ 53 Memory at c450 (64-bit, non-prefetchable) [size=8K] Capabilities: [c8] Power Management version 3 Capabilities: [d0] MSI: Enable+ Count=1/1 Maskable- 64bit+ Capabilities: [e0] Express Endpoint, MSI 00 Capabilities: [100] Advanced Error Reporting Capabilities: [140] Device Serial Number 8c-a9-82-ff-ff-a0-f4-7a Kernel driver in use: iwlagn Kernel modules: iwlagn --- AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.24. ApportVersion: 1.23-0ubuntu3 Architecture: amd64 ArecordDevices: List of CAPTURE Hardware Devices card 0: PCH [HDA Intel PCH], device 0: STAC92xx Analog [STAC92xx Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: gene 1793 F pulseaudio CRDA: Error: [Errno 2] No such file or directory Card0.Amixer.info: Card hw:0 'PCH'/'HDA Intel PCH at 0xc750 irq 53' Mixer name : 'Intel CougarPoint HDMI' Components : 'HDA:111d7605,103c165a,00100105 HDA:80862805,80860101,0010' Controls : 18 Simple ctrls : 10 DistroRelease: Ubuntu 11.10 HibernationDevice: RESUME=UUID=522d916f-a489-4247-acf5-ddf837f836b9 InstallationMedia: Ubuntu 11.04 "Natty Narwhal" - Release amd64 (20110427.1) IwConfig: Error: [Errno 2] No such file or directory MachineType: Hewlett-Packard HP Pavilion dv7 Notebook PC Package: linux (not installed) ProcEnviron: LANGUAGE= PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash ProcKernelCmdLine: root=UUID=ca71fcf1-cfed-4e2c-9593-29b47c9cc6a0 ro quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 3.0.0-12.20-usernameric 3.0.4 RelatedPackageVersions: linux-restricted-modules-3.0.0-12-generic N/A linux-backports-modules-3.0.0-12-generic N/A linux-firmware1.60 RfKill: Error: [Errno 2] No such file or directory StagingDrivers: rts_pstor mei Tags: oneiric staging UdevDb: Error: [Errno 2] No such file or directory Uname: Linux 3.0.0-12-generic x86_64 UpgradeStatus: Upgraded to oneiric on 2011-10-23 (0 days ago) UserGroups: adm admin cdrom dialout lpadmin plugdev sambashare dmi.bios.date: 07/20/2011 dmi.bios.vendor: Hewlett-Packard dmi.bios.version: F.1A dmi.board.asset.tag: Base Board Asset Tag dmi.board.name: 165A dmi.board.vendor: Hewlett-Packard dmi.board.version: 10.31 dmi.chassis.asset.tag: Chassis Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: Hewlett-Packard dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnHewlett-Packard:bvrF.1A:bd07/20/2011:svnHewlett-Packard:pnHPPaviliondv7NotebookPC:pvr058D11244620001620100:rvnHewlett-Packard:rn165A:rvr10.31:cvnHewlett-Packard:ct10:cvrChassisVersion: dmi.product.name: HP Pavilion dv7 Notebook PC dmi.product.version: 058D11244620001620100 dmi.sys.vendor: Hewlett-Packard ** Affects: linux (Ubuntu) Importance: Undecided Status: New ** Tags: apport-collected needs-upstream-testing oneiric regression-release staging -- 8086:0084 wifi iwlagn fails to authenticate after wake from suspend https://bugs.launchpad.net/bugs/880648 You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 790201] Re: Cannot use SR-IOV feature of Intel 82576 network card
OR using EOL release, and no response for years. ** No longer affects: linux (Ubuntu) ** Package changed: linux (Fedora) => linux (Ubuntu) ** Changed in: linux (Ubuntu) Importance: Medium => Undecided ** Changed in: linux (Ubuntu) Remote watch: Red Hat Bugzilla #652210 => None -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/790201 Title: Cannot use SR-IOV feature of Intel 82576 network card Status in linux package in Ubuntu: Invalid Bug description: Hardware is Supermicro B8DTT (TwinBlade), running Ubuntu 10.04.2 (amd64). Steps I've taken: - read http://docs.fedoraproject.org/en-US/Fedora/13/html/Virtualization_Guide/sect-Para-virtualized_Windows_Drivers_Guide-How_SR_IOV_Libvirt_Works.html - enabled VT-d in the BIOS - added "options igb max_vfs=7" to /etc/modprobe.d/local.conf, then ran "update-initramfs -k all -t -u" - rebooted dmesg quote after reboot: [5.573742] igb :05:00.0: not enough MMIO resources for SR-IOV [5.666170] igb :05:00.1: not enough MMIO resources for SR-IOV There is a RH bug report with patches at https://bugzilla.redhat.com/show_bug.cgi?id=523341 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/790201/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 285892] Re: ata1.00: exception Emask 0x0 SAct 0x807f SErr 0x0 action 0x6 frozen
** No longer affects: linux (Ubuntu) ** Package changed: udev (Fedora) => linux (Ubuntu) ** Changed in: linux (Ubuntu) Importance: Medium => Undecided ** Changed in: linux (Ubuntu) Status: Won't Fix => New ** Changed in: linux (Ubuntu) Remote watch: Red Hat Bugzilla #684599 => None ** No longer affects: linux (Ubuntu) ** Package changed: udev (Debian) => linux (Ubuntu) ** Changed in: linux (Ubuntu) Importance: Unknown => Undecided ** Changed in: linux (Ubuntu) Status: Confirmed => New ** Changed in: linux (Ubuntu) Remote watch: Debian Bug tracker #622340 => None ** No longer affects: linux (Ubuntu) ** Project changed: linux => linux (Ubuntu) ** Changed in: linux (Ubuntu) Importance: Unknown => Undecided ** Changed in: linux (Ubuntu) Status: Fix Released => New ** Changed in: linux (Ubuntu) Remote watch: Linux Kernel Bug Tracker #14314 => None ** Changed in: linux (Ubuntu) Status: New => Invalid -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/285892 Title: ata1.00: exception Emask 0x0 SAct 0x807f SErr 0x0 action 0x6 frozen Status in linux package in Ubuntu: Invalid Bug description: Binary package hint: linux-headers-2.6.27-7-generic Since I'm running 8.10 alpha6 64-bit, I'm having now and then a frozen machine for 1 or more minutes. Although I can not pinpoint the reason, it seems to happen soon after booting and round the whole hour. I guess there is some process in the background responsible. So I include the entries of the system log from the freezes at 12:00 and 14:00. I'm not sure if I file this issue under the right package. Sorry for that. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/285892/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 624787] Re: BUG: unable to handle kernel paging request at 746f6fa4; EIP is at omnibook_init+0x30/0x194 [omnibook]
OR using EOL release, and no response for years. ** No longer affects: linux (Fedora) ** Changed in: linux (Ubuntu) Status: Incomplete => Invalid -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/624787 Title: BUG: unable to handle kernel paging request at 746f6fa4; EIP is at omnibook_init+0x30/0x194 [omnibook] Status in linux package in Ubuntu: Invalid Bug description: can't load omnibook-kernel-module ProblemType: KernelOops DistroRelease: Ubuntu 10.10 Package: linux-image-2.6.35-19-generic 2.6.35-19.25 Regression: Yes Reproducible: No ProcVersionSignature: Ubuntu 2.6.35-19.25-generic 2.6.35.3 Uname: Linux 2.6.35-19-generic i686 AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.23. Annotation: Your system might become unstable now and might need to be restarted. AplayDevices: List of PLAYBACK Hardware Devices card 0: Intel [HDA Intel], device 0: ALC861-VD Analog [ALC861-VD Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 Architecture: i386 ArecordDevices: List of CAPTURE Hardware Devices card 0: Intel [HDA Intel], device 0: ALC861-VD Analog [ALC861-VD Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: kamil 1651 F pulseaudio CRDA: Error: [Errno 2] No such file or directory Card0.Amixer.info: Card hw:0 'Intel'/'HDA Intel at 0xdc44 irq 45' Mixer name : 'Realtek ALC861-VD' Components : 'HDA:10ec0862,1179010c,0011 HDA:11c11040,11790001,00100200' Controls : 12 Simple ctrls : 9 Date: Thu Aug 26 18:59:00 2010 Failure: oops Frequency: Once a day. InstallationMedia: Ubuntu 9.10 "Karmic Koala" - Release Candidate i386 (20091020.3) MachineType: TOSHIBA Satellite A200 PccardctlIdent: Socket 0: no product info available PccardctlStatus: Socket 0: no card ProcCmdLine: BOOT_IMAGE=(hd0,2)/boot2/vmlinuz-2.6.35-19-generic root=/dev/sda2 loop=/hostname/disks/root.disk splash RelatedPackageVersions: linux-firmware 1.38 SourcePackage: linux Title: BUG: unable to handle kernel paging request at 746f6fa4 dmi.bios.date: 08/21/2007 dmi.bios.vendor: TOSHIBA dmi.bios.version: V1.80 dmi.board.name: ISKAE dmi.board.vendor: TOSHIBA dmi.board.version: 1.00 dmi.chassis.asset.tag: * dmi.chassis.type: 10 dmi.chassis.vendor: TOSHIBA dmi.chassis.version: N/A dmi.modalias: dmi:bvnTOSHIBA:bvrV1.80:bd08/21/2007:svnTOSHIBA:pnSatelliteA200:pvrPSAE0E-00Y018PL:rvnTOSHIBA:rnISKAE:rvr1.00:cvnTOSHIBA:ct10:cvrN/A: dmi.product.name: Satellite A200 dmi.product.version: PSAE0E-00Y018PL dmi.sys.vendor: TOSHIBA To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/624787/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 285892] Missing required logs.
This bug is missing log files that will aid in diagnosing the problem. While running an Ubuntu kernel (not a mainline or third-party kernel) please enter the following command in a terminal window: apport-collect 285892 and then change the status of the bug to 'Confirmed'. If, due to the nature of the issue you have encountered, you are unable to run this command, please add a comment stating that fact and change the bug status to 'Confirmed'. This change has been made by an automated script, maintained by the Ubuntu Kernel Team. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/285892 Title: ata1.00: exception Emask 0x0 SAct 0x807f SErr 0x0 action 0x6 frozen Status in linux package in Ubuntu: Invalid Bug description: Binary package hint: linux-headers-2.6.27-7-generic Since I'm running 8.10 alpha6 64-bit, I'm having now and then a frozen machine for 1 or more minutes. Although I can not pinpoint the reason, it seems to happen soon after booting and round the whole hour. I guess there is some process in the background responsible. So I include the entries of the system log from the freezes at 12:00 and 14:00. I'm not sure if I file this issue under the right package. Sorry for that. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/285892/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 704900] Re: 04e8:60a6 External USB3 disk problems: Sense Key : Recovered Error
OR using EOL release, and no response for years. ** No longer affects: linux (Ubuntu) ** Package changed: fedora => linux (Ubuntu) ** Changed in: linux (Ubuntu) Status: Won't Fix => New ** Changed in: linux (Ubuntu) Remote watch: Red Hat Bugzilla #677239 => None ** Changed in: linux (Ubuntu) Status: New => Invalid -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/704900 Title: 04e8:60a6 External USB3 disk problems: Sense Key : Recovered Error Status in linux package in Ubuntu: Invalid Bug description: I bought a Samsung S2 Portable 3 disk with 1 TB diskspace. It's an USB3 disk, but right now I don't have a USB3 controller. Because it's USB2 compatible it should also work without usind USB3 hardware. The disk itself can be found from the system: [88630.509045] usb 1-4: new high speed USB device using ehci_hcd and address 5 [88630.649996] scsi7 : usb-storage 1-4:1.0 [88635.424345] scsi 7:0:0:0: Direct-Access Samsung S2 Portable 32AM1 PQ: 0 ANSI: 0 [88635.424941] sd 7:0:0:0: Attached scsi generic sg2 type 0 [88635.427174] sd 7:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [88635.427912] sd 7:0:0:0: [sdb] Write Protect is off [88635.427916] sd 7:0:0:0: [sdb] Mode Sense: 23 00 00 00 [88635.427919] sd 7:0:0:0: [sdb] Assuming drive cache: write through [88635.429429] sd 7:0:0:0: [sdb] Assuming drive cache: write through [88635.429434] sdb: sdb1 sdb2 [88635.464287] sd 7:0:0:0: [sdb] Assuming drive cache: write through [88635.464289] sd 7:0:0:0: [sdb] Attached SCSI disk This might look fine but after one or two seconds the log says this: [88635.534292] sd 7:0:0:0: [sdb] Sense Key : Recovered Error [current] [descriptor] [88635.534298] Descriptor sense data with sense descriptors (in hex): [88635.534300] 72 01 04 1d 00 00 00 0a 09 0c 00 00 00 00 00 07 [88635.534311] 00 00 [88635.534315] sd 7:0:0:0: [sdb] ASC=0x4 ASCQ=0x1d [88640.878326] sd 7:0:0:0: [sdb] Sense Key : Recovered Error [current] [descriptor] This goes on and on until I mount some partitions with it. Yes, fdisk and other stuff is working. But: when I remove all filesystems and partitions the disk itself seems to "hop on hop off": Jan 18 11:53:03 borgcube kernel: [4146611.121046] usb 1-3: new high speed USB de vice using ehci_hcd and address 17 Jan 18 11:53:03 borgcube kernel: [4146611.258042] scsi15 : usb-storage 1-3:1.0 Jan 18 11:53:07 borgcube kernel: [4146614.864273] scsi 15:0:0:0: Direct-Access Samsung S2 Portable 32AM1 PQ: 0 ANSI: 0 Jan 18 11:53:07 borgcube kernel: [4146614.864839] sd 15:0:0:0: Attached scsi gen eric sg2 type 0 Jan 18 11:53:07 borgcube kernel: [4146614.869054] sd 15:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) Jan 18 11:53:07 borgcube kernel: [4146614.869870] sd 15:0:0:0: [sdb] Write Prote ct is off Jan 18 11:53:07 borgcube kernel: [4146614.871374] sdb: sdb1 Jan 18 11:53:07 borgcube kernel: [4146614.904607] sd 15:0:0:0: [sdb] Attached SCSI disk Jan 18 11:53:07 borgcube kernel: [4146615.219224] sd 15:0:0:0: [sdb] Sense Key : Recovered Error [current] [descriptor] Jan 18 11:53:07 borgcube kernel: [4146615.219230] Descriptor sense data with sense descriptors (in hex): Jan 18 11:53:07 borgcube kernel: [4146615.219233] 72 01 04 1d 00 00 00 0a 09 0c 00 00 00 00 00 07 Jan 18 11:53:07 borgcube kernel: [4146615.219248] 00 00 Jan 18 11:53:07 borgcube kernel: [4146615.219251] sd 15:0:0:0: [sdb] ASC=0x4 ASCQ=0x1d Jan 18 11:53:07 borgcube usbmount[17389]: /dev/sdb does not contain a filesystem or disklabel Jan 18 11:53:07 borgcube usbmount[17416]: /dev/sdb1 does not contain a filesystem or disklabel Jan 18 11:53:10 borgcube kernel: [4146618.110387] usb 1-3: USB disconnect, address 17 Jan 18 11:53:10 borgcube kernel: [4146618.365031] usb 1-3: new high speed USB device using ehci_hcd and address 18 Jan 18 11:53:10 borgcube kernel: [4146618.502330] scsi16 : usb-storage 1-3:1.0 Jan 18 11:53:11 borgcube kernel: [4146619.500708] scsi 16:0:0:0: Direct-Access Samsung S2 Portable 32AM1 PQ: 0 ANSI: 0 Jan 18 11:53:11 borgcube kernel: [4146619.501482] sd 16:0:0:0: Attached scsi generic sg2 type 0 Jan 18 11:53:11 borgcube kernel: [4146619.508149] sd 16:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) Jan 18 11:53:11 borgcube kernel: [4146619.509024] sd 16:0:0:0: [sdc] Write Protect is off Jan 18 11:53:11 borgcube kernel: [4146619.510690] sdc: sdc1 Jan 18 11:53:11 borgcube kernel: [4146619.513177] sd 16:0:0:0: [sdc] Attached SCSI disk Jan 18 11:53:11 borgcube kernel: [4146619.550430] sd 16:0:0:0: [sdc] Sense Key : Recovered Error [current] [descriptor] Jan 18 11:53:11 borgcube kernel: [4146619.550437] Descriptor sense data with sense descriptors (in hex):
[Kernel-packages] [Bug 884210] Re: PCI/internal sound not working randomly, random hangs: "cannot set freq 16000 to ep 0x86" shown in syslog
OR using EOL release, and no response for years. ** No longer affects: linux (Ubuntu) ** Package changed: linux (Fedora) => linux (Ubuntu) ** Changed in: linux (Ubuntu) Importance: High => Undecided ** Changed in: linux (Ubuntu) Status: Won't Fix => New ** Changed in: linux (Ubuntu) Remote watch: Red Hat Bugzilla #663583 => None ** Changed in: linux (Ubuntu) Status: New => Invalid -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/884210 Title: PCI/internal sound not working randomly, random hangs: "cannot set freq 16000 to ep 0x86" shown in syslog Status in linux package in Ubuntu: Invalid Bug description: The sound works fines most of the fines, however on random boots, no sound is produced and after logging in the sound preferences does not show any device input/output device. When this happens the dmesg output is flooded with: 2:3:1: cannot set freq 16000 to ep 0x86 I have plugged at Logitech, Inc. QuickCam E 3500, so it might be related to: Logitech, Inc. QuickCam E 3500 ProblemType: Bug DistroRelease: Ubuntu 11.10 Package: alsa-base 1.0.24+dfsg-0ubuntu2 ProcVersionSignature: Ubuntu 3.0.0-12.20-generic 3.0.4 Uname: Linux 3.0.0-12-generic x86_64 NonfreeKernelModules: nvidia AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.24. ApportVersion: 1.23-0ubuntu3 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: janito 2970 F pulseaudio /dev/snd/pcmC2D0c: janito 2970 F...m pulseaudio /dev/snd/controlC0: janito 2970 F pulseaudio Card0.Amixer.info: Card hw:0 'Intel'/'HDA Intel at 0xfbff8000 irq 54' Mixer name : 'Realtek ALC889' Components : 'HDA:10ec0889,1458a132,0014' Controls : 40 Simple ctrls : 23 Card1.Amixer.info: Card hw:1 'NVidia'/'HDA NVidia at 0xf9ffc000 irq 17' Mixer name : 'Nvidia GPU 12 HDMI/DP' Components : 'HDA:10de0012,10de0101,00100100' Controls : 16 Simple ctrls : 4 Card2.Amixer.info: Card hw:2 'U0x46d0x9a4'/'USB Device 0x46d:0x9a4 at usb-:00:1a.7-2, high speed' Mixer name : 'USB Mixer' Components : 'USB046d:09a4' Controls : 2 Simple ctrls : 1 Card2.Amixer.values: Simple mixer control 'Mic',0 Capabilities: cvolume cvolume-joined cswitch cswitch-joined penum Capture channels: Mono Limits: Capture 0 - 3072 Mono: Capture 1 [0%] [23.00dB] [on] Date: Mon Oct 31 12:47:13 2011 EcryptfsInUse: Yes InstallationMedia: Ubuntu 11.04 "Natty Narwhal" - Release amd64 (20110427.1) PackageArchitecture: all ProcEnviron: LANGUAGE=pt:pt_BR:en PATH=(custom, user) LANG=pt_PT.UTF-8 SHELL=/bin/bash PulseSinks: Error: command ['pacmd', 'list-sinks'] failed with exit code 1: Daemon not responding. PulseSources: Error: command ['pacmd', 'list-sources'] failed with exit code 1: Daemon not responding. SourcePackage: alsa-driver Symptom: audio Title: PCI/internal sound card not detected UpgradeStatus: Upgraded to oneiric on 2011-09-26 (34 days ago) dmi.bios.date: 08/04/2011 dmi.bios.vendor: Award Software International, Inc. dmi.bios.version: Fh3 dmi.board.name: X58A-UD3R dmi.board.vendor: Gigabyte Technology Co., Ltd. dmi.board.version: x.x dmi.chassis.type: 3 dmi.chassis.vendor: Gigabyte Technology Co., Ltd. dmi.modalias: dmi:bvnAwardSoftwareInternational,Inc.:bvrFh3:bd08/04/2011:svnGigabyteTechnologyCo.,Ltd.:pnX58A-UD3R:pvr:rvnGigabyteTechnologyCo.,Ltd.:rnX58A-UD3R:rvrx.x:cvnGigabyteTechnologyCo.,Ltd.:ct3:cvr: dmi.product.name: X58A-UD3R dmi.sys.vendor: Gigabyte Technology Co., Ltd. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/884210/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 722806] Re: Asus M2A-VM: kernel demanding EDID for an unconnected monitor
** No longer affects: linux (Ubuntu) ** Package changed: linux (Fedora) => linux (Ubuntu) ** Changed in: linux (Ubuntu) Importance: Medium => Undecided ** Changed in: linux (Ubuntu) Status: Won't Fix => New ** Changed in: linux (Ubuntu) Remote watch: Red Hat Bugzilla #668196 => None ** No longer affects: linux (Ubuntu) ** Project changed: linux => linux (Ubuntu) ** Changed in: linux (Ubuntu) Status: Fix Released => Invalid -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/722806 Title: Asus M2A-VM: kernel demanding EDID for an unconnected monitor Status in linux package in Ubuntu: Invalid Bug description: There is a problem with mainboard Asus M2A-VM. There is no HDMI monitor connected (monitor uses DVI) but the kernel still tries to read the EDID. Thus, dmesg is spammed every 10 seconds with this message: [ 21.383270] [drm:drm_edid_block_valid] *ERROR* Raw EDID: [ 21.383305] <3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 21.383307] <3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 21.383310] <3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 21.383312] <3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 21.383314] <3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 21.383317] <3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 21.383319] <3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 21.383322] <3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 21.383324] [ 21.383328] radeon :01:05.0: HDMI-A-1: EDID block 0 invalid. [ 21.383332] [drm:radeon_dvi_detect] *ERROR* HDMI-A-1: probed a monitor but no|invalid EDID X behaves very jerky because of the load caused by the kernel demanding the EDID every 10 seconds. For more info see https://bugzilla.redhat.com/show_bug.cgi?id=668196 and http://ubuntuforums.org/showthread.php?t=1607778 I found three possible solutions to solve my problem: 1) disable KMS by using the kernel parameter "radeon.modeset=0" Unfortunately, the X server will then segfault after a short time 2) get the kernel source and patch the radeon driver, see http://ubuntuforums.org/showthread.php?t=1607778 (the patch is not from me!) this works, but you have to patch the kernel after every update again 3) execute the command "echo -n N > /sys/module/drm_kms_helper/parameters/poll" This will effectively stop the pollution of the dmesg (and all the quirky X behavior). This option does not exist in kernel 2.6.35 that's why I had update to kernel 2.6.38 It would be fine if the kernel tries to read the EDID only once and then stops trying if it fails (see patch from solution #2). To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/722806/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 603445] [NEW] Ricoh SD controller (1180:e822) not working: unknown version
You have been subscribed to a public bug: Also tested on Maverick alpha 2. The laptop is a Dell E5410. This SD reader does not work. Upon insertion of a SD card this shows in dmesg: [ 3466.345329] mmc0: Unexpected interrupt 0x0200. [ 3466.345335] sdhci: == REGISTER DUMP == [ 3466.345343] sdhci: Sys addr: 0x | Version: 0x0402 [ 3466.345350] sdhci: Blk size: 0x7008 | Blk cnt: 0x0001 [ 3466.345357] sdhci: Argument: 0x | Trn mode: 0x0013 [ 3466.345364] sdhci: Present: 0x01ff0202 | Host ctl: 0x0011 [ 3466.345371] sdhci: Power:0x000f | Blk gap: 0x [ 3466.345378] sdhci: Wake-up: 0x | Clock:0x4007 [ 3466.345385] sdhci: Timeout: 0x000a | Int stat: 0x02008000 [ 3466.345392] sdhci: Int enab: 0x02ff00cb | Sig enab: 0x02ff00cb [ 3466.345399] sdhci: AC12 err: 0x | Slot int: 0x0001 [ 3466.345406] sdhci: Caps: 0x21e832b2 | Max curr: 0x0040 [ 3466.345413] sdhci: ADMA Err: 0x0001 | ADMA Ptr: 0x369dd8d8 [ 3466.345415] sdhci: === [ 3466.345443] mmc0: Unexpected interrupt 0x0200. [ 3466.345448] sdhci: == REGISTER DUMP == [ 3466.345455] sdhci: Sys addr: 0x | Version: 0x0402 [ 3466.345462] sdhci: Blk size: 0x7008 | Blk cnt: 0x0001 [ 3466.345469] sdhci: Argument: 0x | Trn mode: 0x0013 [ 3466.345475] sdhci: Present: 0x01ff0202 | Host ctl: 0x0011 [ 3466.345482] sdhci: Power:0x000f | Blk gap: 0x [ 3466.345490] sdhci: Wake-up: 0x | Clock:0x4007 [ 3466.345496] sdhci: Timeout: 0x000a | Int stat: 0x02008008 [ 3466.345503] sdhci: Int enab: 0x02ff00cb | Sig enab: 0x02ff00cb [ 3466.345510] sdhci: AC12 err: 0x | Slot int: 0x0001 [ 3466.345517] sdhci: Caps: 0x21e832b2 | Max curr: 0x0040 [ 3466.345524] sdhci: ADMA Err: 0x0001 | ADMA Ptr: 0x369dd9a4 [ 3466.345527] sdhci: === [ 3466.345556] mmc0: Unexpected interrupt 0x0200. [ 3466.345560] sdhci: == REGISTER DUMP == [ 3466.345566] sdhci: Sys addr: 0x | Version: 0x0402 [ 3466.345572] sdhci: Blk size: 0x7008 | Blk cnt: 0x0001 [ 3466.345579] sdhci: Argument: 0x | Trn mode: 0x0013 [ 3466.345586] sdhci: Present: 0x01ff0202 | Host ctl: 0x0011 [ 3466.345593] sdhci: Power:0x000f | Blk gap: 0x [ 3466.345600] sdhci: Wake-up: 0x | Clock:0x4007 [ 3466.345607] sdhci: Timeout: 0x000a | Int stat: 0x02008008 [ 3466.345613] sdhci: Int enab: 0x02ff00cb | Sig enab: 0x02ff00cb [ 3466.345620] sdhci: AC12 err: 0x | Slot int: 0x0001 [ 3466.345627] sdhci: Caps: 0x21e832b2 | Max curr: 0x0040 [ 3466.345633] sdhci: ADMA Err: 0x0001 | ADMA Ptr: 0x369dda6c [ 3466.345636] sdhci: === [ 3466.345708] mmc0: Unexpected interrupt 0x0200. [ 3466.345713] sdhci: == REGISTER DUMP == [ 3466.345720] sdhci: Sys addr: 0x | Version: 0x0402 [ 3466.345727] sdhci: Blk size: 0x7008 | Blk cnt: 0x0001 [ 3466.345734] sdhci: Argument: 0x | Trn mode: 0x0013 [ 3466.345740] sdhci: Present: 0x01ff0202 | Host ctl: 0x0011 [ 3466.345747] sdhci: Power:0x000f | Blk gap: 0x [ 3466.345754] sdhci: Wake-up: 0x | Clock:0x4007 [ 3466.345761] sdhci: Timeout: 0x000a | Int stat: 0x02008000 [ 3466.345768] sdhci: Int enab: 0x02ff00cb | Sig enab: 0x02ff00cb [ 3466.345775] sdhci: AC12 err: 0x | Slot int: 0x0001 [ 3466.345782] sdhci: Caps: 0x21e832b2 | Max curr: 0x0040 [ 3466.345789] sdhci: ADMA Err: 0x0001 | ADMA Ptr: 0x0028d5a7 [ 3466.345791] sdhci: === [ 3466.345871] mmc0: Unexpected interrupt 0x0200. [ 3466.345874] sdhci: == REGISTER DUMP == [ 3466.345881] sdhci: Sys addr: 0x | Version: 0x0402 [ 3466.345888] sdhci: Blk size: 0x7008 | Blk cnt: 0x0001 [ 3466.345895] sdhci: Argument: 0x | Trn mode: 0x0013 [ 3466.345901] sdhci: Present: 0x01ff0202 | Host ctl: 0x0011 [ 3466.345908] sdhci: Power:0x000f | Blk gap: 0x [ 3466.345914] sdhci: Wake-up: 0x | Clock:0x4007 [ 3466.345920] sdhci: Timeout: 0x000a | Int stat: 0x02008008 [ 3466.345926] sdhci: Int enab: 0x02ff00cb | Sig enab: 0x02ff00cb [ 3466.345933] sdhci: AC12 err: 0x | Slot int: 0x0001 [ 3466.345939] sdhci: Caps: 0x21e832b2 | Max curr: 0x0040 [ 3466.345946] sdhci: ADMA Err: 0x0001 | ADMA Ptr: 0xc683c189 [ 3466.345949] sdhci: === ProblemType: Bug DistroRelease: Ubuntu 10.04 Package: linux-image-2.6.32-23-generic 2.6.32-23.37 Regression: No Reproducible: No ProcVersionSignature: Ubuntu 2.6.32-23.37-generic 2.6.32.15+drm33.5 Uname: Linux 2.6.32-23-generic i686 AlsaVersion:
[Kernel-packages] [Bug 791833] [NEW] Dell ST2220T Monitor responds to touch only on warm boot from windows
You have been subscribed to a public bug: Dell ST2220T Monitors have been purchased. On first install, the touchscreen worked pretty well. But it started to behave weird after restarts. The behaviour is as follows: On cold boot touch never works. But once going to Windows 7 and coming back after a warm boot, the touch works perfectly. From now, it works until there are no cold boots. Once cold boot happens into Ubuntu, touch stops working. This behaviour has been consistent. I tried to put usbhid.quirks with : : 0x40 as mentioned here http://ubuntuforums.org/showthread.php?p=10287057#post10287057 but it did not work. This is on Ubuntu Natty. A patch from Red Hat bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=703118 seems to help the issue significantly, but, a few touch features (such as "click") seem to still need some work. The patch doesn't seem to be upstream yet in the mainline kernel. SRU Request: Impact: Customer currently has 150 of these monitors with plans to expand to 1,500 next year and 10,000 in the year after that. Getting these devices to work with ubuntu will help out a lot with cost reduction for the customer. Patch: See bugzilla reference above. Steps to reproduce: 1) Install 11.04 (In this case the system was dual-booted with Windows 7) 2) Without the patch, the touchscreen only seems to work if the machine is warm-rebooted from Windows. The touch features don't work at all if the system is cold-booted into Ubuntu. 3) With the patch, the touchscreen appears to work with cold boots and warm reboots, but, 'click' features on the touchscreen still need to be applied. TEST CASE: Apply the patch to the kernel, then test the touchscreen after warm reboots and cold boots to ensure that the touchscreen is fully functional. Customer has agreed to assist with testing, etc. Regression Potential: Unknown at this time. Patch appears to be pretty trivial and isolated so regression potential seems to be pretty low. ** Affects: oem-priority Importance: High Assignee: Canonical Kernel Team (canonical-kernel-team) Status: Invalid ** Affects: oem-priority/oneiric Importance: Undecided Status: Invalid ** Affects: linux (Ubuntu) Importance: Undecided Status: New ** Tags: cold-boot dell dell-st2220t testcase touch touchscreen -- Dell ST2220T Monitor responds to touch only on warm boot from windows https://bugs.launchpad.net/bugs/791833 You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1716747] Re: linux 4.12 - high system load and mouse delays - pipe A vblank wait timed out
Experiencing the same problem Specs: Dell n411z Ubuntu 17.10 artful kernel 4.13.0-16.19 (also tried 4.12.0-041200.20 but problem still exists) -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1716747 Title: linux 4.12 - high system load and mouse delays - pipe A vblank wait timed out Status in linux package in Ubuntu: In Progress Status in linux source package in Artful: In Progress Bug description: This issue has been observed on a Lenovo X220i laptop: 1. Booting the laptop with artful's 4.12 kernel results in a very sluggish system performance (mouse pointer delays) and a high system load. 2. /var/log/kern.log indicates a problem with the display driver (see below) 3. The system works without any issues if the zesty kernel (4.10) is used instead. Ubuntu release: Artful Aardvark (development branch) Kernel package version: 4.12.0.13.14 Sep 12 20:22:45 trinity kernel: [ 155.491074] pipe A vblank wait timed out Sep 12 20:22:45 trinity kernel: [ 155.491117] [ cut here ] Sep 12 20:22:45 trinity kernel: [ 155.491171] WARNING: CPU: 0 PID: 203 at /build/linux-cK2WUa/linux-4.12.0/drivers/gpu/drm/i915/intel_display.c:12636 intel_atomic_commit_tail+0x1010/0x1020 [i915] Sep 12 20:22:45 trinity kernel: [ 155.491172] Modules linked in: nf_conntrack_netlink nfnetlink xfrm_user xfrm_algo xt_addrtype br_netfilter aufs xt_CHECKSUM iptable_mangle ipt_MASQUERADE nf_nat_masquerade_ipv4 iptable_nat nf_nat_ipv4 nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack ipt_REJECT nf_reject_ipv4 xt_tcpudp bridge stp llc ebtable_filter ebtables ip6table_filter ip6_tables iptable_filter binfmt_misc snd_hda_codec_hdmi snd_hda_codec_conexant snd_hda_codec_generic snd_hda_intel intel_rapl x86_pkg_temp_thermal intel_powerclamp coretemp snd_hda_codec snd_hda_core snd_hwdep snd_pcm kvm_intel snd_seq_midi kvm snd_seq_midi_event irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel cryptd intel_cstate snd_rawmidi intel_rapl_perf arc4 uvcvideo videobuf2_vmalloc iwldvm videobuf2_memops videobuf2_v4l2 mac80211 Sep 12 20:22:45 trinity kernel: [ 155.491215] videobuf2_core videodev joydev input_leds media iwlwifi serio_raw cfg80211 snd_seq snd_seq_device snd_timer thinkpad_acpi nvram snd mac_hid mei_me mei soundcore lpc_ich shpchp parport_pc ppdev lp parport ip_tables x_tables autofs4 xfs libcrc32c mmc_block i915 sdhci_pci uas usb_storage sdhci i2c_algo_bit drm_kms_helper psmouse syscopyarea ahci sysfillrect libahci sysimgblt e1000e fb_sys_fops drm ptp pps_core wmi video Sep 12 20:22:45 trinity kernel: [ 155.491251] CPU: 0 PID: 203 Comm: kworker/u16:5 Not tainted 4.12.0-13-generic #14-Ubuntu Sep 12 20:22:45 trinity kernel: [ 155.491253] Hardware name: LENOVO 4290W1A/4290W1A, BIOS 8DET69WW (1.39 ) 07/18/2013 Sep 12 20:22:45 trinity kernel: [ 155.491292] Workqueue: events_unbound intel_atomic_commit_work [i915] Sep 12 20:22:45 trinity kernel: [ 155.491295] task: 8842c14a8000 task.stack: ae8f0217c000 Sep 12 20:22:45 trinity kernel: [ 155.491330] RIP: 0010:intel_atomic_commit_tail+0x1010/0x1020 [i915] Sep 12 20:22:45 trinity kernel: [ 155.491331] RSP: 0018:ae8f0217fd88 EFLAGS: 00010282 Sep 12 20:22:45 trinity kernel: [ 155.491333] RAX: 001c RBX: RCX: Sep 12 20:22:45 trinity kernel: [ 155.491334] RDX: RSI: 8842de20dcc8 RDI: 8842de20dcc8 Sep 12 20:22:45 trinity kernel: [ 155.491336] RBP: ae8f0217fe40 R08: 0001 R09: 039a Sep 12 20:22:45 trinity kernel: [ 155.491337] R10: ae8f0217fd88 R11: R12: 2359 Sep 12 20:22:45 trinity kernel: [ 155.491338] R13: 8842c150 R14: 8842c15e6000 R15: 0001 Sep 12 20:22:45 trinity kernel: [ 155.491340] FS: () GS:8842de20() knlGS: Sep 12 20:22:45 trinity kernel: [ 155.491342] CS: 0010 DS: ES: CR0: 80050033 Sep 12 20:22:45 trinity kernel: [ 155.491343] CR2: 00c420921000 CR3: 0003a0409000 CR4: 000406f0 Sep 12 20:22:45 trinity kernel: [ 155.491345] Call Trace: Sep 12 20:22:45 trinity kernel: [ 155.491352] ? wake_bit_function+0x60/0x60 Sep 12 20:22:45 trinity kernel: [ 155.491386] intel_atomic_commit_work+0x12/0x20 [i915] Sep 12 20:22:45 trinity kernel: [ 155.491390] process_one_work+0x1e7/0x410 Sep 12 20:22:45 trinity kernel: [ 155.491393] worker_thread+0x4a/0x410 Sep 12 20:22:45 trinity kernel: [ 155.491396] kthread+0x125/0x140 Sep 12 20:22:45 trinity kernel: [ 155.491398] ? process_one_work+0x410/0x410 Sep 12 20:22:45 trinity kernel: [ 155.491400] ? kthread_create_on_node+0x70/0x70 Sep 12 20:22:45 trinity kernel: [ 155.491403] ret_from_fork+0x25/0x30 Sep 12 20:22:45 trinity
[Kernel-packages] [Bug 732243] [NEW] Acer Logitech, Inc. Orbicam fails to start working.
You have been subscribed to a public bug: Problem description: Logitech, Inc. Orbicam (ID 046d:0896) doesn't work with Cheese (green led on cam doesn't light up and no images appear) unless we run Cheese multiple consecutive times. Webcam doesn't work with Skype too (no images and led turned off). This problem has started when Ubuntu 10.10 was installed (kernel 2.6.35-27-generic - 64 bits). Webcam was working at Ubuntu 10.04 (all kernel versions released until Mar-08 / 2011). Ubuntu version: Distributor ID: Ubuntu Description:Ubuntu 10.10 Release:10.10 Codename: maverick Kernel version: Linux 2.6.35-27-generic #48-Ubuntu SMP Tue Feb 22 20:25:46 UTC 2011 x86_64 GNU/Linux Steps to reproduce the bug: (With Cheese) 1. run Cheese - green led on cam doesn't light up and a black screen appears instead of the image. 2. close Cheese and start it again. 3. If the cam still doesn't work, repeat step 2. (With Skype 2.1.0.81) 1. run Skype (/usr/bin/skype-wrapper) 2. Log in as a valid user. 3. At the main menu, click "Options", and then click the "Video" tab on the left 4. Enable Skype Video. Check the box next to "Enable Skype Video." 5. Open the pull-down menu of devices. Select the device (sometimes it appears as /dev/video0 and sometimes as /dev/video1). 6. Click at the "Test" webcam button. 7. Green led on cam doesn't light up and a black screen appears instead of the image. Expected results: Cam led lights up and image appears when Cheese is started. Cam led lights up and image appears in the web cam test at Skype. Additional info: lsusb output: Bus 005 Device 002: ID 062a:0001 Creative Labs Notebook Optical Mouse Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 017: ID 046d:0896 Logitech, Inc. OrbiCam Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub /var/log/messages when I tried to run Cheese four times and the cam worked only at the last (fourth) attempt: Mar 9 17:04:26 aspire kernel: [ 6472.857266] usb 1-4: USB disconnect, address 17 Mar 9 17:04:26 aspire kernel: [ 6472.857342] gspca: video0 disconnect Mar 9 17:04:27 aspire kernel: [ 6474.512285] gspca: set alt 0 err -19 Mar 9 17:04:27 aspire kernel: [ 6474.512294] gspca: usb_submit_urb alt 7 err -19 Mar 9 17:04:28 aspire kernel: [ 6474.790146] usb 1-4: new high speed USB device using ehci_hcd and address 18 Mar 9 17:04:28 aspire kernel: [ 6474.969126] gspca: probing 046d:0896 Mar 9 17:04:28 aspire kernel: [ 6474.969133] vc032x: Sensor PO Mar 9 17:04:28 aspire kernel: [ 6474.971180] gspca: video1 created Mar 9 17:04:36 aspire kernel: [ 6482.628464] gspca: video0 released Mar 9 17:06:51 aspire kernel: [ 6618.082332] usb 1-4: USB disconnect, address 18 Mar 9 17:06:51 aspire kernel: [ 6618.082410] gspca: video1 disconnect Mar 9 17:06:53 aspire kernel: [ 6619.742700] gspca: set alt 0 err -19 Mar 9 17:06:53 aspire kernel: [ 6619.742710] gspca: usb_submit_urb alt 7 err -19 Mar 9 17:06:53 aspire kernel: [ 6620.020143] usb 1-4: new high speed USB device using ehci_hcd and address 19 Mar 9 17:06:53 aspire kernel: [ 6620.209951] gspca: probing 046d:0896 Mar 9 17:06:53 aspire kernel: [ 6620.209958] vc032x: Sensor PO Mar 9 17:06:53 aspire kernel: [ 6620.214951] gspca: video0 created Mar 9 17:07:31 aspire kernel: [ 6657.839792] gspca: video1 released Mar 9 17:07:44 aspire kernel: [ 6670.992411] usb 1-4: USB disconnect, address 19 Mar 9 17:07:44 aspire kernel: [ 6670.992481] gspca: video0 disconnect Mar 9 17:07:46 aspire kernel: [ 6672.650173] gspca: set alt 0 err -19 Mar 9 17:07:46 aspire kernel: [ 6672.650183] gspca: usb_submit_urb alt 7 err -19 Mar 9 17:07:46 aspire kernel: [ 6672.932615] usb 1-4: new high speed USB device using ehci_hcd and address 20 Mar 9 17:07:46 aspire kernel: [ 6673.105526] gspca: probing 046d:0896 Mar 9 17:07:46 aspire kernel: [ 6673.105533] vc032x: Sensor PO Mar 9 17:07:46 aspire kernel: [ 6673.107520] gspca: video1 created Mar 9 17:07:51 aspire kernel: [ 6678.155567] gspca: video0 released v4l-info /dev/video0 output open /dev/video0: No such file or directory v4l-info /dev/video1 output ### v4l2 device info [/dev/video1] ### general info VIDIOC_QUERYCAP driver : "vc032x" card: "Camera" bus_info: "usb-:00:1d.7-4" version : 2.9.0 capabilities: 0x501 [VIDEO_CAPTURE,READWRITE,STREAMING] standards inputs VIDIOC_ENUMINPUT(0) index : 0 name: "vc032x" type: CAMERA audioset: 0 tuner : 0 std : 0x0 [] status : 0x0 []
[Kernel-packages] [Bug 1441852] Re: [HP Spectre x360 - 13-4010ca] Audio broken, broadwell-U audio controller
OR using EOL release, and no response for years. ** Package changed: gentoo => linux (Ubuntu) ** Changed in: linux (Ubuntu) Status: New => Invalid -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1441852 Title: [HP Spectre x360 - 13-4010ca] Audio broken, broadwell-U audio controller Status in linux package in Ubuntu: Invalid Bug description: On ubuntu trusty, Audio driver on HP Spectre x360 doesn't work. May be related to the bug found on the 2015 XPS 13. (https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1413446) On the kernel 4.0-rc4+ given as solution for the bug found on the XPS 13, the dmesg -t | egrep "(audio|snd|INT3438)" command return: dmar: ACPI device "INT3438:00" under DMAR at fed91000 as 00:13.0 snd_hda_intel :00:03.0: enabling device ( -> 0002) sst-acpi INT3438:00: DesignWare DMA Controller, 8 channels haswell-pcm-audio haswell-pcm-audio: FW loaded, mailbox readback FW info: type 01, - version: 00.00, build 77, source commit id: 876ac6906f31a43b6772b23c7c983ce9dcb18a19 broadwell-audio broadwell-audio: ASoC: CODEC DAI rt286-aif1 not registered --- ApportVersion: 2.14.1-0ubuntu3.8 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: isatis 1479 F pulseaudio CurrentDesktop: Unity DistroRelease: Ubuntu 14.04 HibernationDevice: RESUME=UUID=1e13c664-5747-48ed-942c-18c0610b50dd InstallationDate: Installed on 2015-04-01 (12 days ago) InstallationMedia: Ubuntu 14.04.2 LTS "Trusty Tahr" - Release amd64 (20150218.1) MachineType: Hewlett-Packard HP Spectre x360 Convertible 13 Package: linux (not installed) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.16.0-34-generic.efi.signed root=UUID=70117e8f-97a5-40f7-90fd-aa25fdba1bba ro quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 3.16.0-34.45~14.04.1-generic 3.16.7-ckt8 RelatedPackageVersions: linux-restricted-modules-3.16.0-34-generic N/A linux-backports-modules-3.16.0-34-generic N/A linux-firmware 1.127.11 Tags: trusty Uname: Linux 3.16.0-34-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 02/05/2015 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: F.11 dmi.board.asset.tag: Base Board Asset Tag dmi.board.name: 802D dmi.board.vendor: Hewlett-Packard dmi.board.version: 58.25 dmi.chassis.type: 10 dmi.chassis.vendor: Hewlett-Packard dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrF.11:bd02/05/2015:svnHewlett-Packard:pnHPSpectrex360Convertible13:pvr:rvnHewlett-Packard:rn802D:rvr58.25:cvnHewlett-Packard:ct10:cvrChassisVersion: dmi.product.name: HP Spectre x360 Convertible 13 dmi.sys.vendor: Hewlett-Packard To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1441852/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 285892] [NEW] ata1.00: exception Emask 0x0 SAct 0x807f SErr 0x0 action 0x6 frozen
You have been subscribed to a public bug: Binary package hint: linux-headers-2.6.27-7-generic Since I'm running 8.10 alpha6 64-bit, I'm having now and then a frozen machine for 1 or more minutes. Although I can not pinpoint the reason, it seems to happen soon after booting and round the whole hour. I guess there is some process in the background responsible. So I include the entries of the system log from the freezes at 12:00 and 14:00. I'm not sure if I file this issue under the right package. Sorry for that. ** Affects: linux (Ubuntu) Importance: Undecided Status: New ** Tags: apport-collected kernel-core kernel-reviewed kj-triage linux-2.6.27 needs-kernel-logs -- ata1.00: exception Emask 0x0 SAct 0x807f SErr 0x0 action 0x6 frozen https://bugs.launchpad.net/bugs/285892 You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 1441852] Re: [HP Spectre x360 - 13-4010ca] Audio broken, broadwell-U audio controller
Status changed to 'Confirmed' because the bug affects multiple users. ** Changed in: linux (Ubuntu) Status: New => Confirmed -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1441852 Title: [HP Spectre x360 - 13-4010ca] Audio broken, broadwell-U audio controller Status in linux package in Ubuntu: Invalid Bug description: On ubuntu trusty, Audio driver on HP Spectre x360 doesn't work. May be related to the bug found on the 2015 XPS 13. (https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1413446) On the kernel 4.0-rc4+ given as solution for the bug found on the XPS 13, the dmesg -t | egrep "(audio|snd|INT3438)" command return: dmar: ACPI device "INT3438:00" under DMAR at fed91000 as 00:13.0 snd_hda_intel :00:03.0: enabling device ( -> 0002) sst-acpi INT3438:00: DesignWare DMA Controller, 8 channels haswell-pcm-audio haswell-pcm-audio: FW loaded, mailbox readback FW info: type 01, - version: 00.00, build 77, source commit id: 876ac6906f31a43b6772b23c7c983ce9dcb18a19 broadwell-audio broadwell-audio: ASoC: CODEC DAI rt286-aif1 not registered --- ApportVersion: 2.14.1-0ubuntu3.8 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: isatis 1479 F pulseaudio CurrentDesktop: Unity DistroRelease: Ubuntu 14.04 HibernationDevice: RESUME=UUID=1e13c664-5747-48ed-942c-18c0610b50dd InstallationDate: Installed on 2015-04-01 (12 days ago) InstallationMedia: Ubuntu 14.04.2 LTS "Trusty Tahr" - Release amd64 (20150218.1) MachineType: Hewlett-Packard HP Spectre x360 Convertible 13 Package: linux (not installed) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.16.0-34-generic.efi.signed root=UUID=70117e8f-97a5-40f7-90fd-aa25fdba1bba ro quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 3.16.0-34.45~14.04.1-generic 3.16.7-ckt8 RelatedPackageVersions: linux-restricted-modules-3.16.0-34-generic N/A linux-backports-modules-3.16.0-34-generic N/A linux-firmware 1.127.11 Tags: trusty Uname: Linux 3.16.0-34-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 02/05/2015 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: F.11 dmi.board.asset.tag: Base Board Asset Tag dmi.board.name: 802D dmi.board.vendor: Hewlett-Packard dmi.board.version: 58.25 dmi.chassis.type: 10 dmi.chassis.vendor: Hewlett-Packard dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrF.11:bd02/05/2015:svnHewlett-Packard:pnHPSpectrex360Convertible13:pvr:rvnHewlett-Packard:rn802D:rvr58.25:cvnHewlett-Packard:ct10:cvrChassisVersion: dmi.product.name: HP Spectre x360 Convertible 13 dmi.sys.vendor: Hewlett-Packard To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1441852/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 772834] [NEW] Asus U43F with 11.04 freeze on suspend
You have been subscribed to a public bug: Hi, I have an Asus U43F. And the problem that I'm having is that when I close the laptop or click on Suspend the computer goes into a black screen and freezes there, I can still hear the fan and the only way to get it working again is by doing a hard reset. --- AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.23. Architecture: i386 ArecordDevices: List of CAPTURE Hardware Devices card 0: Intel [HDA Intel], device 0: ALC269VB Analog [ALC269VB Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: mandojm1332 F pulseaudio CRDA: Error: [Errno 2] No such file or directory Card0.Amixer.info: Card hw:0 'Intel'/'HDA Intel at 0xf540 irq 48' Mixer name : 'Intel IbexPeak HDMI' Components : 'HDA:10ec0269,10431213,00100100 HDA:80862804,10431213,0010' Controls : 19 Simple ctrls : 10 DistroRelease: Ubuntu 11.04 HibernationDevice: RESUME=UUID=9d0e68e9-1003-459f-b7bc-3fb54dec1e94 InstallationMedia: Ubuntu 11.04 "Natty Narwhal" - Release i386 (20110427.1) MachineType: ASUSTeK Computer Inc. U43F Package: linux (not installed) ProcEnviron: LANGUAGE=en_US:en LANG=en_US.UTF-8 SHELL=/bin/bash ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-2.6.38-8-generic-pae root=UUID=df4fb911-730b-4a3c-96d2-d870765717fa ro quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 2.6.38-8.42-generic-pae 2.6.38.2 RelatedPackageVersions: linux-restricted-modules-2.6.38-8-generic-pae N/A linux-backports-modules-2.6.38-8-generic-pae N/A linux-firmware1.52 RfKill: 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no Tags: natty running-unity Uname: Linux 2.6.38-8-generic-pae i686 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm admin cdrom dialout lpadmin plugdev sambashare dmi.bios.date: 05/26/2010 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 210 dmi.board.asset.tag: ATN12345678901234567 dmi.board.name: U43 dmi.board.vendor: PEGATRON CORPORATION dmi.board.version: 1.0 dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: PEGATRON Computer Inc. dmi.chassis.version: 1.0 dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr210:bd05/26/2010:svnASUSTeKComputerInc.:pnU43F:pvr1.0:rvnPEGATRONCORPORATION:rnU43:rvr1.0:cvnPEGATRONComputerInc.:ct10:cvr1.0: dmi.product.name: U43F dmi.product.version: 1.0 dmi.sys.vendor: ASUSTeK Computer Inc. ** Affects: linux (Ubuntu) Importance: Undecided Status: New ** Tags: apport-collected kernel-power natty needs-upstream-testing running-unity -- Asus U43F with 11.04 freeze on suspend https://bugs.launchpad.net/bugs/772834 You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
[Kernel-packages] [Bug 717931] Re: Unknown Keycode for Touchpad toggle
OR using EOL release, and no response since 2013. ** No longer affects: linux (Ubuntu) ** Package changed: linux (Fedora) => linux (Ubuntu) ** Changed in: linux (Ubuntu) Importance: Medium => Undecided ** Changed in: linux (Ubuntu) Status: Won't Fix => New ** Changed in: linux (Ubuntu) Remote watch: Red Hat Bugzilla #635219 => None ** Changed in: linux (Ubuntu) Status: New => Invalid -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/717931 Title: Unknown Keycode for Touchpad toggle Status in linux package in Ubuntu: Invalid Bug description: I expected to be able to toggle whether the touchpad works via Fn+F6 on my Lenovo Ideapad S10-3t. But instead, I get this: [ 2975.474700] atkbd serio0: Unknown key released (translated set 2, code 0xf2 on isa0060/serio0). [ 2975.474716] atkbd serio0: Use 'setkeycodes e072 ' to make it known. ProblemType: Bug DistroRelease: Ubuntu 11.04 Package: linux-image-2.6.38-3-generic 2.6.38-3.30 Regression: No Reproducible: Yes ProcVersionSignature: Ubuntu 2.6.38-3.30-generic 2.6.38-rc4 Uname: Linux 2.6.38-3-generic x86_64 AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.23. AplayDevices: List of PLAYBACK Hardware Devices card 0: Intel [HDA Intel], device 0: CONEXANT Analog [CONEXANT Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 Architecture: amd64 ArecordDevices: List of CAPTURE Hardware Devices card 0: Intel [HDA Intel], device 0: CONEXANT Analog [CONEXANT Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: muelli 1527 F pulseaudio CRDA: Error: [Errno 2] No such file or directory Card0.Amixer.info: Card hw:0 'Intel'/'HDA Intel at 0xf040 irq 44' Mixer name : 'Conexant CX20582 (Pebble)' Components : 'HDA:14f15066,17aa4003,00100302' Controls : 8 Simple ctrls : 5 CurrentDmesg: [ 2975.334993] atkbd serio0: Unknown key pressed (translated set 2, code 0xf2 on isa0060/serio0). [ 2975.335008] atkbd serio0: Use 'setkeycodes e072 ' to make it known. [ 2975.474700] atkbd serio0: Unknown key released (translated set 2, code 0xf2 on isa0060/serio0). [ 2975.474716] atkbd serio0: Use 'setkeycodes e072 ' to make it known. Date: Sun Feb 13 00:34:44 2011 HibernationDevice: RESUME=UUID=19373b74-bcce-4bf1-bca7-0c1686eca780 InstallationMedia: Ubuntu 11.04 "Natty Narwhal" - Alpha amd64 (20110201.2) MachineType: LENOVO 20040M18 ProcEnviron: LANGUAGE=en_GB:en LANG=en_GB.UTF-8 LC_MESSAGES=en_GB.utf8 SHELL=/bin/bash ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-2.6.38-3-generic root=/dev/mapper/hostname-root ro quiet splash vt.handoff=7 RelatedPackageVersions: linux-restricted-modules-2.6.38-3-generic N/A linux-backports-modules-2.6.38-3-generic N/A linux-firmware 1.47 SourcePackage: linux dmi.bios.date: 08/11/2010 dmi.bios.vendor: LENOVO dmi.bios.version: 24CN61WW dmi.board.name: Caucasus2 dmi.board.vendor: LENOVO dmi.board.version: Rev 1.0 dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: Lenovo dmi.chassis.version: Rev 1.0 dmi.modalias: dmi:bvnLENOVO:bvr24CN61WW:bd08/11/2010:svnLENOVO:pn20040M18:pvrLenovoIdeapadS10-3t:rvnLENOVO:rnCaucasus2:rvrRev1.0:cvnLenovo:ct10:cvrRev1.0: dmi.product.name: 20040M18 dmi.product.version: Lenovo Ideapad S10-3t dmi.sys.vendor: LENOVO To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/717931/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp