I have been searching but I am not finding a lot of good info on this. Most of
the stuff out there expects you to 1. know the tasks and 2. have the conversion
files. My problem is also that I have a mix of Orcad version files.. Some of my
files are 6.x and some 9.x Orcad had a bad habit of versioning up and not
directly supporting prior versions. You had to recompile everything. I am able
to view the 9.x designs with a demo pspice product I found on the web but I
have not found a way to view the 6.x files. I do not have any of the original
disks anymore. So my only hope is to find a way to convert them. So I ask
again, if anyone has any ideas, or a direction to go in, please let me know.
Doug
--- On Thu, 2/5/09, yajeed2000 da...@djsbriscoe.vispa.com wrote:
From: yajeed2000 da...@djsbriscoe.vispa.com
Subject: [kicad-users] Re: Orcad to Kicad (again)
To: kicad-users@yahoogroups.com
Date: Thursday, February 5, 2009, 11:34 AM
--- In kicad-users@ yahoogroups. com, Doug dsc3...@... wrote:
I realize this has been discussed at length before but in my searches
I am not sure how resolved it is. Can someone tell me the steps to
convert Orcad libs and sheets to Kicad? Is this in a FAQ? I know there
are utils in the files section but I have been unsuccessful in using
them. Mostly because I did not have the additional files required in
the process - decomp, etc. Are these files part of the Orcad dist?
I have an old Orcad install floating around somewhere. I suspect I
need to install that, decompile the libs to src, then being them into
Kicad somehow. I am not sure how the actual schematic sheets would work.
Any help would be appreciated.
Hi,
Try following the instructions in this post
http://tech. groups.yahoo. com/group/ kicad-users/ message/3202
Also do a search of the group for similar topics.
David.