KR> Jabiru powered KR2-S
The Jabiru is lighter so you may need to hang the battery on the firewall. You can also fit spacers between the firewall and the mounting to extend it forward. The engine must be offset 3 degrees to the right. My mounting is 10mm longer on the left side but untested. The long nose makes it look like fighter plane. You can also mount the engine higher than a VW that will allow you to swing a larger prop. As soon as as I fitted the RPM pick-up my 3300 will be ready to fly. Regards Willie South Africa ---Original Message--- From: Kolbjørn Seth List-Post: krnet@list.krnet.org Date: 2011/05/23 02:19:56 PM To: KRnet Cc: KRnet Subject: Re: KR> Jabiru powered KR2-S That would of course have been my next questions. I have an engine mount but it remains to be seen if it will keep me within cg range. Thank you all!
KR> RE: Jabiru engines
Hi Kolbjørn Have a look at this and other forums on the Recreational Flying site .. a very helpful bunch of aviation enthusiasts and one of the most popular aviation sites in the world! http://www.recreationalflying.net/forums/aircraft-avionics-engines-and-props .64/ You will find lots of threads about Jabiru engines and there is a specific Jabiru forum on the site as well The problems and issues are discussed on here as well as lots of general interest stuff, and, Like the KR net, I have found that there are some very knowledgeable people prepared to share their wisdom if asked . Not sure if you have to log in, but it is free and even better, spam free The site is privately owned by a recreational aircraft pilot and owner and was set up for the sole purpose of promoting safe flying and friendly communication . Cheers Martin Martin Pearce - KR2 with Subaru EA81 + KR2 S with GMH Saturn - Both in my garage, neither registered or flying in Au ---yet! rocketdri...@optusnet.com.au
KR> Wheel Pant Mounting Brackets
Once again I have broken a wheel pant mounting bracket. This makes at least ten times they have broken and each time I am paying around 10 dollars to get them welded back together. They are made from 6061T6 aluminum. When I made them I simply bent them to shape but eventually they started breaking at the bends. I would get them welded and then over time they would break at the edge of the weld. All from vibration of course. For what I have paid to have them repaired I could have had them gold plated by now. Anyway, what are your brackets made from and how are they holding up? Mark Jones (N886MJ) Stevens Point, WI E-mail: flyk...@charter.net Web: www.flykr2s.com
KR> Jabiru powered KR2-S
Hi Kolbjoern I have a standard KR2 with a Jabiru 2200 Engine. See my WEB pages http://athertonairport.com.au/kr2/ http://athertonairport.com.au/kr2/jabiru_engine.htm http://athertonairport.com.au/kr2/w_and_b.htm Being that the KR2S is bigger than the standard KR2 I would go for the Jabiru 3300 engine (which is still lighter than a WV conversion engine and 120HP). Any other info please contact me. Regards Barry Kruyssen k...@bigpond.com http://athertonairport.com.au/kr2/
KR> Wheel Pant Mounting Brackets
Once again I have broken a wheel pant mounting bracket. This makes at least ten times they have broken and each time I am paying around 10 dollars to get them welded back together. They are made from 6061T6 aluminum. When I made them I simply bent them to shape but eventually they started breaking at the bends. I would get them welded and then over time they would break at the edge of the weld. All from vibration of course. For what I have paid to have them repaired I could have had them gold plated by now. Anyway, what are your brackets made from and how are they holding up? Mark Jones (N886MJ) Stevens Point, WI E-mail: flyk...@charter.net Web: www.flykr2s.com
KR> Jabiru powered KR2-S
That would of course have been my next questions. I have an engine mount but it remains to be seen if it will keep me within cg range. Thank you all! Mvh. Kolbjørn Seth Den 23. mai 2011 kl. 12:46 skrev Peter Diffey : > Yes Colin Hales is your man. > > He may well be able to help with engine mountings cowling etc > > +44 7970 773507 > -- > Sent from my Android phone with K-9 Mail. Please excuse my brevity. > > John Looby wrote: > > The KR2 has flown from UK to Australia using that engine John - Original > Message - From: "Kolbjørn Seth" To: > Sent: Monday, May 23, 2011 9:50 AM Subject: KR> Jabiru > powered KR2-S Now I am finally a proper member of the community! I just > bought an 80% completet KR2-S (I know, I know, still 80% to go) from two > gentlemen in Gotenburg, Sweden who quite clearly knew what they were doing. > Excellent work as far as I can tell. It comes with a Jabiru 2200 80 hp engine > and I would very much like to get in touch with any other builder builders > using this engine to determine if this choice of engine is a viable path to > success. Contact with other builders in southern Sweden is also much > appreciated. So far I am sucking up as much useful information as I can from > the network and you really are a gold mine! Regards Kolbjoern > Seth_ > Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp to > UNsubscribe from KRnet, send a message to krnet-le...@mylist.net please see > other KRnet info at http://www.krnet.org/info.html - No virus found in > this message. Checked by AVG - www.avg.com Version: 10.0.1375 / Virus > Database: 1509/3654 - Release Date: > 05/22/11_ > Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp to > UNsubscribe from KRnet, send a message to krnet-le...@mylist.net please see > other KRnet info at http://www.krnet.org/info.html > > ___ > Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp > to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net > please see other KRnet info at http://www.krnet.org/info.html
KR> Jabiru powered KR2-S
Yes Colin Hales is your man. He may well be able to help with engine mountings cowling etc +44 7970 773507 -- Sent from my Android phone with K-9 Mail. Please excuse my brevity. John Looby wrote: The KR2 has flown from UK to Australia using that engine John - Original Message - From: "Kolbjørn Seth" To: Sent: Monday, May 23, 2011 9:50 AM Subject: KR> Jabiru powered KR2-S Now I am finally a proper member of the community! I just bought an 80% completet KR2-S (I know, I know, still 80% to go) from two gentlemen in Gotenburg, Sweden who quite clearly knew what they were doing. Excellent work as far as I can tell. It comes with a Jabiru 2200 80 hp engine and I would very much like to get in touch with any other builder builders using this engine to determine if this choice of engine is a viable path to success. Contact with other builders in southern Sweden is also much appreciated. So far I am sucking up as much useful information as I can from the network and you really are a gold mine! Regards Kolbjoern Seth_ Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net please see other KRnet info at http://www.krnet.org/info.html - No virus found in this message. Checked by AVG - www.avg.com Version: 10.0.1375 / Virus Database: 1509/3654 - Release Date: 05/22/11_ Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net please see other KRnet info at http://www.krnet.org/info.html
KR> Canopy frame wanted
Would anyone have a canopy frame for a plans built KR2 for sale. Thanks Brad
KR> Jabiru powered KR2-S
I fitted the 3300 engine in my standard KR2 but did not fly it yet. ---Original Message--- From: John Looby List-Post: krnet@list.krnet.org Date: 2011/05/23 11:11:07 AM To: KRnet Subject: Re: KR> Jabiru powered KR2-S The KR2 has flown from UK to Australia using that engine John - Original Message - From: "Kolbjørn Seth" To: Sent: Monday, May 23, 2011 9:50 AM Subject: KR> Jabiru powered KR2-S Now I am finally a proper member of the community! I just bought an 80% Completet KR2-S
KR> Jabiru powered KR2-S
The KR2 has flown from UK to Australia using that engine John - Original Message - From: "Kolbjørn Seth" To: Sent: Monday, May 23, 2011 9:50 AM Subject: KR> Jabiru powered KR2-S Now I am finally a proper member of the community! I just bought an 80% completet KR2-S (I know, I know, still 80% to go) from two gentlemen in Gotenburg, Sweden who quite clearly knew what they were doing. Excellent work as far as I can tell. It comes with a Jabiru 2200 80 hp engine and I would very much like to get in touch with any other builder builders using this engine to determine if this choice of engine is a viable path to success. Contact with other builders in southern Sweden is also much appreciated. So far I am sucking up as much useful information as I can from the network and you really are a gold mine! Regards Kolbjoern Seth ___ Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net please see other KRnet info at http://www.krnet.org/info.html - No virus found in this message. Checked by AVG - www.avg.com Version: 10.0.1375 / Virus Database: 1509/3654 - Release Date: 05/22/11
KR> Jabiru powered KR2-S
Now I am finally a proper member of the community! I just bought an 80% completet KR2-S (I know, I know, still 80% to go) from two gentlemen in Gotenburg, Sweden who quite clearly knew what they were doing. Excellent work as far as I can tell. It comes with a Jabiru 2200 80 hp engine and I would very much like to get in touch with any other builder builders using this engine to determine if this choice of engine is a viable path to success. Contact with other builders in southern Sweden is also much appreciated. So far I am sucking up as much useful information as I can from the network and you really are a gold mine! Regards Kolbjoern Seth
KR> Dragonfly canopy dissapointment
Hi Dene I hade a mould made that is with Jan Diener. Please look at my canopy http://www.avcom.co.za/phpBB3/viewtopic php?f=100&t=64731&p=901663&Sid=76c2716329a1e8303f48f0190e40ab51#p901663 It is page 5 ZS-UNC. I'll let you use it if you like. Regards Willie 0835805703 Phalaborwa RSA ---Original Message--- From: Dene Collett List-Post: krnet@list.krnet.org Date: 2011/05/21 03:05:02 PM To: KRnet Subject: KR> Dragonfly canopy dissapointment Hi guys After looking at a few of your websights, specifically ML's, I have come to The conclusion that the dragonfly canopy sold in South Africa is not the Same canopy as was sold in the USA. ... ___ Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp To UNsubscribe from KRnet, send a message to krnet-le...@mylist.net Please see other KRnet info at http://www.krnet.org/info.html