KR> Grease on wood
Thanks for all the advise guys. I'll try what I can and let you know the results. I sent my nephew to Texas because from Minnesota that was as far as I could send him and not have him get lost. (straight down I-35, don't get off till you reach Texas.) patric...@usfamily.net Patrick Driscoll Saint Paul, MN If you could read this, thank a teacher If you read it in English, thank a veteran --- Get FREE High Speed Internet from USFamily.Net! -- http://www.usfamily.net/mkt-freepromo.html ---
KR> Grease on Wood
Having my nephew around here for the last few years, I have not been able to work on my project due to the mess of junk he would pile on my work table.(He's 53 yrs old with an old car and a motorcycle) He is now gone to Texas and I have cleaned off my work table. Big problem, he spilled some oil and grease on the table and the right side of my project was still on the table. the skinned side was up and has oil stains on the front two bays. there is also oil or grease stains on the back stringers and longerons. Is there anything that will neutralize the stains or will I have to rebuild the side? patric...@usfamily.net Patrick Driscoll Saint Paul, MN If you could read this, thank a teacher If you read it in English, thank a veteran --- Get FREE High Speed Internet from USFamily.Net! -- http://www.usfamily.net/mkt-freepromo.html ---
KR> Test
Sent a message to the net yesterday. Have not seen it or the one to Flybaby net. Patrick Driscoll Saint Paul, MN If you could read this, thank a teacher If you read it in English, thank a veteran --- http://USFamily.Net/dialup.html - $8.25/mo! -- http://www.usfamily.net/dsl.html - $19.99/mo! ---
KR> Gluing Techniques
I used a plastic resturant ketchup bottle. I mixed the T88 with a metel rod with a hook on the end that I flattened out with a hammer. I put the pointed top on the bottle and cut off a bit of the tip at an angle and squeezed the T88 out in a long string along the strips of wood and then used a solder brush to smooth put the bead and dropped the side ply onto the strips, moved it around a bit to get a good glue bite and let it set up. (Use staples for clamps). Do not forget to turnthe side over so that the excess forms a filet with the side instead of driping down the side stringers and gluing to the table. (Don't ask me how I know). Patrick Driscoll Saint Paul, MN If you could read this, thank a teacher If you read it in English, thank a veteran --- http://USFamily.Net/dialup.html - $8.25/mo! -- http://www.usfamily.net/dsl.html - $19.99/mo! ---
KR> Drilling holes
Perhaps take and paint the explosed bare metal after you drill the holes with epoxy paint How do you drill holes with epoxy paint? :) Patrick Driscoll Saint Paul, MN If you could read this, thank a teacher If you read it in English, thank a veteran --- http://USFamily.Net/dialup.html - $8.25/mo! -- http://www.usfamily.net/dsl.html - $19.99/mo! ---
KR> Spruce V Douglas Fir
I bought my wood from a boat building company,(Sitka Spruce) and my douglas fir came from a old house that was being torn down Patrick Driscoll Saint Paul, MN If you could read this, thank a teacher If you read it in English, thank a veteran --- http://USFamily.Net/dialup.html - $8.25/mo! -- http://www.usfamily.net/dsl.html - $19.99/mo! ---
KR> Tuning Antenna
Mark's buddy said: turning on a transponder with no antenna connected can fry the thing in a matter of seconds. 250 watts with no where to go, Never check the pretty lights on a transmitter with no load. You can hook a 150/200 watt lightbulb to the antennae lead and even tune your Xmitter with that load.. Patrick Driscoll Eight years Electronics. U.S. Airforce Saint Paul, MN If you could read this, thank a teacher If you read it in English, thank a veteran --- http://USFamily.Net/dialup.html - $8.25/mo! -- http://www.usfamily.net/dsl.html - $19.99/mo! ---
KR> Waiting for the plans...
Russ wrote: I had a printing company print out the templates for the A5048/45 airfoil. I thought they were kind of spendy at $120 for the print. Russ I took a disk I copied from Mark L's website and took it to Kinco's. @) bucks for full size printout. Patrick Driscoll Saint Paul, MN If you could read this, thank a teacher If you read it in English, thank a veteran --- http://USFamily.Net/dialup.html - $8.25/mo! -- http://www.usfamily.net/dsl.html - $19.99/mo! ---
KR> Waiting for the plans...
That was supposed to read $20 Patrick Driscoll Saint Paul, MN If you could read this, thank a teacher If you read it in English, thank a veteran --- http://USFamily.Net/dialup.html - $8.25/mo! -- http://www.usfamily.net/dsl.html - $19.99/mo! ---
KR> Fuselage length
Mark L. Wrote; I'm a light pilot with lead in my tail already I'm glad you qualified that remark Mark (in the form of a battery and elevator counterweight) Patrick Driscoll Saint Paul, MN If you could read this, thank a teacher If you read it in English, thank a veteran --- http://USFamily.Net/dialup.html - $8.25/mo! -- http://www.usfamily.net/dsl.html - $19.99/mo! ---
KR> Losers
OK I guess I'll have to stop with the extra Beer at night, (is 5:00 PM considered night?) I have been sitting around too long in this cold weather instead of out doing something, The only reason I do any excersize is that at 70 years old it's the only way to hear heavy breathing again. I"ve spent $20.20 per month for the last two years at Bally"s but it's doing no good. My wife say's that maybeI should actualy go there. At least at 254.5 lbs. I am lower than I have been since last Thanksgiving. Patrick Driscoll Saint Paul, MN If you could read this, thank a teacher If you read it in English, thank a veteran --- http://USFamily.Net/dialup.html - $8.25/mo! -- http://www.usfamily.net/dsl.html - $19.99/mo! ---
KR> Paint Balls
Mark J. any news on how you are going to mount the paint-ball guns yet. With all the cold weather, I would have thought you would be mounting them in the wing with a feed from inside the cockpit. If any of you guys see Mark J. comming at you in his plane, check to make sure there are no little holes in his leading edge. Patrick Driscoll Saint Paul, MN If you could read this, thank a teacher If you read it in English, thank a veteran --- http://USFamily.Net/dialup.html - $8.25/mo! -- http://www.usfamily.net/dsl.html - $19.99/mo! ---
KR> Delay in e-mail postings
Dan. Got your post at 6:30 when I got to my computer .Don't know just how long it had been in my mailbox Patrick Driscoll Saint Paul, MN If you could read this, thank a teacher If you read it in English, thank a veteran --- http://USFamily.Net/dialup.html - $8.25/mo! -- http://www.usfamily.net/dsl.html - $19.99/mo! ---
KR> Delay in e-mail postings
Dan, Now that I look at your post I checked the received time and it was 4:48 AM CST. (Three min. travel time. Patrick Driscoll Saint Paul, MN If you could read this, thank a teacher If you read it in English, thank a veteran --- http://USFamily.Net/dialup.html - $8.25/mo! -- http://www.usfamily.net/dsl.html - $19.99/mo! ---
KR> Delay in e-mail postings
I'm a 20 year retired Air Force. Thank you also. Patrick Driscoll Saint Paul, MN If you could read this, thank a teacher If you read it in English, thank a veteran --- http://USFamily.Net/dialup.html - $8.25/mo! -- http://www.usfamily.net/dsl.html - $19.99/mo! ---
KR> Veteran
Sorry guys. After I sent the vet. post I noticed that Mark Wegmet had sent the post to me through the net. Patrick Driscoll Saint Paul, MN If you could read this, thank a teacher If you read it in English, thank a veteran --- http://USFamily.Net/dialup.html - $8.25/mo! -- http://www.usfamily.net/dsl.html - $19.99/mo! ---
KR> Back Again
OK I'm back. I happened to think of a program that I installed the day before Christmas Eve. and that was the only change I had made and I had forgotten about it. It had a spam filter on it that I didn't know about untill I began looking through it. I canceled the program and started to get the KR net and the Corvair net. Thank you all for the suggestions. Patrick Driscoll Saint Paul, MN --- http://USFamily.Net/dialup.html - $8.25/mo! -- http://www.usfamily.net/dsl.html - $19.99/mo! ---
KR> Test
Test Patrick Driscoll Saint Paul, MN --- http://USFamily.Net/dialup.html - $8.25/mo! -- http://www.usfamily.net/dsl.html - $19.99/mo! ---
KR> Test
Would someone please send me a message off the net and let me know if my messages are getting through? I have not received a KR net message since the day before Christmas and only one Corvair net message. I didn't even get my last test message back. Patrick Driscoll Saint Paul, MN --- http://USFamily.Net/dialup.html - $8.25/mo! -- http://www.usfamily.net/dsl.html - $19.99/mo! ---
KR> Test
Just another test. Patrick Driscoll Saint Paul, MN --- http://USFamily.Net/dialup.html - $8.25/mo! -- http://www.usfamily.net/dsl.html - $19.99/mo! ---
KR> Test
It seems that I am getting out OK but I still am not getting anything back. I guess I received all of the replies you people have sent but that's as far as it goes Patrick Driscoll Saint Paul, MN --- http://USFamily.Net/dialup.html - $8.25/mo! -- http://www.usfamily.net/dsl.html - $19.99/mo! ---
KR> Test.
OK my ISP just marked the list as not spam so I'm trying again. Patrick Driscoll Saint Paul, MN --- http://USFamily.Net/dialup.html - $8.25/mo! -- http://www.usfamily.net/dsl.html - $19.99/mo! ---
KR> Flying
If you guys (and gals) have not seen it yet click on the link below to see the ulitamate in flying. http://jet-man.com:80/actuel_eng.html Patrick Driscoll Saint Paul, MN --- http://USFamily.Net/dialup.html - $8.25/mo! -- http://www.usfamily.net/dsl.html - $19.99/mo! ---
KR> GPS
Anyone out there know anything about the POLOROID GPS (and CD player) that I saw at Sams Club last week? I tried to contact Poloroid but haven't heard from them yet. It has a screen about 5" sq. I am wondering if it will accept Aero Chart downloads from a computer. Iknow nothing about downloading to GPS systems so I need help from someone who does know. Patrick Driscoll Saint Paul, MN --- http://USFamily.Net/dialup.html - $8.25/mo! -- http://www.usfamily.net/dsl.html - $19.99/mo! ---
KR> Hiccuping
Mark, A lot of good ideas form most of the guys on the net but my grandmother swore on using a spoonful of Baking soda, Cures hicckups every time. Patrick Driscoll Saint Paul, MN --- http://USFamily.Net/dialup.html - $8.25/mo! -- http://www.usfamily.net/dsl.html - $19.99/mo! ---
KR> Boat
Robert Wrote, Steve, Now you've got me curious about the "paint scheme" on the flying sphincter. I'm not sure if I want to see it or not. You have to keep in mind that the Sphincter is what keeps the feeces from entering the rotary air distribution device. Patrick Driscoll Saint Paul, MN --- http://USFamily.Net/dialup.html - $8.25/mo! -- http://www.usfamily.net/dsl.html - $19.99/mo! ---
KR> Re: Biggest Looser Club
Count me in on the "Big Looser" club. Right now I am at 261 Lbs. Need to get down to 200 or better yet 180 Patrick Driscoll Saint Paul, MN --- http://USFamily.Net/dialup.html - $8.25/mo! -- http://www.usfamily.net/dsl.html - $19.99/mo! ---
KR> Fw: Doug Fir
Mike. Wrote: Yes, some of it. It's very old and I am waiting for any reaction that might happen when cutting it open. The wood is so dry it could have a tendancy to split. Mike Johnson Mike, I used some Douglas Fir on my first aircraft, that came out of an old house. It was very dry so I let it set outside for a couple of weeks to raise the moisture level. Patrick Driscoll Saint Paul, MN --- http://USFamily.Net/dialup.html - $8.25/mo! -- http://www.usfamily.net/dsl.html - $19.99/mo! ---
KR> plywood
I checked the archives and only found two posts about Baltic Birch. Both of them favorable. Does anyone use this on their skins? This stuff is only $12.50 for a 50" x 50" X 1/8" Patrick Driscoll Saint Paul, MN patric...@usfamily.net --- http://USFamily.Net/dialup.html - $8.25/mo! -- http://www.usfamily.net/dsl.html - $19.99/mo! ---
KR> Gathering
`I guess I'm not too sure if I will make the gathering this year. Joanne is in the hospital after a fall two weeks ago. The fall didn't do much harm,(broken nose), but when checking for breaks with x-ray, MRI and CT scan, they found that she had a rare parasite in her that caused abscess inside on her gall bladder, her liver and under her heart. She had been sick for a few days and we were on our way to the Dr's. office when she fell. She was supposed to get out of the hospital last Wed. but this morning they gave her a blood transfusion so I'm not sure how long she will be in there and what kind of care she will need when she gets out. I've got a room paid for at the Americas Best Motel, for Thurs. Fri. & Sat. nights if some one needs a room. Patrick Driscoll Saint Paul, MN patric...@usfamily.net --- http://USFamily.Net/dialup.html - $8.25/mo! -- http://www.usfamily.net/dsl.html - $19.99/mo! ---
KR> Gathering
I guess that I am going to miss this years gathering. I hoped that Joanne would get out of the Hospital this weekend but she is still in. They are going to do another test tomorrow to see if they can remove the three tubes in her. If they can take them out, she might be able to come home Wed. or Thurs, but she will have to have a nurse come to the house every day to give her the antibiotics she needs until this clears up. I guess I can still cancel my room at the Americas Best Motel so if someone wants it I will give them your name when I cancel. I think the room was $48 per night. Thank you all for your concern for my wife's health. I'll see you all at next years gathering, if not before. Patrick Driscoll Saint Paul, MN patric...@usfamily.net --- http://USFamily.Net/dialup.html - $8.25/mo! -- http://www.usfamily.net/dsl.html - $19.99/mo! ---
KR> Plywood
Does anyone know of a aircraft grade plywood supplier near the twin cities,(Minneapolis, St Paul, MN)? Patrick Driscoll Saint Paul, MN patric...@usfamily.net --- http://USFamily.Net/dialup.html - $8.25/mo! -- http://www.usfamily.net/dsl.html - $19.99/mo! ---
KR> Spar
Thinking of laminating my center spar caps and building in the dihedral. Do I do this at the center of the spar or where the spar exits the fuselage? Patrick Driscoll Saint Paul, MN patric...@usfamily.net --- http://USFamily.Net/dialup.html - $8.25/mo! -- http://www.usfamily.net/dsl.html - $19.99/mo! ---
KR> Gathering
I know everyone is tuned in to Osh. right now but I would like to start setting up for the adult beverages at the gathering. I was going to bring a keg but I thought that it would be better to arrange to pick up a keg from a distributor at Mount Vernon and not have to bounce the hot keg in the back of the car for eight hours. Can we get an idea of what arrangements are being made so that we don't have four or five kegs show up.(unless of course, some of you want to have more than one glass each). Patrick Driscoll Saint Paul, MN patric...@usfamily.net --- http://USFamily.Net/dialup.html - $8.25/mo! -- http://www.usfamily.net/dsl.html - $19.99/mo! ---
KR> Aspen
Thanks for all the replies and thanks again to Dick Hartwig for his lead to the wood site. If you haven't checked it out yet, go to: http://www.woodbin.com/ref/wood/strength_table.htm . There's a lot of information on all woods there. Patrick Driscoll Saint Paul, MN patric...@usfamily.net --- http://USFamily.Net/dialup.html - $8.25/mo! -- http://www.usfamily.net/dsl.html - $19.99/mo! ---
KR> T-88
Is there some way to thin T-88 without losing the bonding power. I've checked the archives but nothing on thinning T-88 Patrick Driscoll patric...@usfamily.net Saint Paul, MN Don't lrt them tell you the sky's the limit. Man's footprints are on the moon --- http://USFamily.Net/dialup.html - $8.25/mo! -- http://www.usfamily.net/dsl.html - $19.99/mo! ---
KR> T-88
Thanks to Jim, Dan, Steve and others that gave me some advice. I guess I'll just have to live with the sticky glops. Patrick Driscoll patric...@usfamily.net Saint Paul, MN Don't let them tell you the sky's the limit. Man's footprints are on the moon --- http://USFamily.Net/dialup.html - $8.25/mo! -- http://www.usfamily.net/dsl.html - $19.99/mo! ---
KR> Sticky glops
I noticed that when I scarfed my longerons, I noticed that the T-88 would build up as I brushed it on. The glops appeared on the sides of the boards and I had to scrape them off. I wanted to "paint" the T-88 onto the side pieces of plywood along the glue lines without having it build up outside the lines.Patrick Driscoll patric...@usfamily.net Saint Paul, MN Don't let them tell you the sky's the limit. Man's footprints are on the moon --- http://USFamily.Net/dialup.html - $8.25/mo! -- http://www.usfamily.net/dsl.html - $19.99/mo! ---
KR> Stub Wings
I would like to extend my stub wings by 1'. I have enough wood in my log to make one top main spar and top and bottom rear spar. If I stay at the plans spar (6') I can make top and bottom main spar and top and bottom of rear spar. Ouestion. Will I really gain anything worthwhile by adding a foot to the stub wings, or is the lift difference so small that it's really not worth it? Patrick Driscoll Saint Paul, MN patric...@usfamily.net --- http://USFamily.Net/dialup.html - $8.25/mo! -- http://www.usfamily.net/dsl.html - $19.99/mo! ---
KR> wood
Has anyone tried Aspen wood in their aircraft? I searched the archives but could find nothing on Aspen. I was looking for Douglas fir at the lumberyard and saw some Aspen planks that had a very fine grain (about 18 lines per inch). I'm not sure of the strength of this wood and wonder if it could be used for the uprights between the longerons and maybe the intercostals between the spar caps. Patrick Driscoll Saint Paul, MN patric...@usfamily.net --- http://USFamily.Net/dialup.html - $8.25/mo! -- http://www.usfamily.net/dsl.html - $19.99/mo! ---
KR> For Sale?
Didn't work Mark. I think everyone knew if they got Langford's post before yours. Good try but I'll really miss Mark L's post on this day.Pat Driscoll Saint Paul, MN patric...@usfamily.net --- http://USFamily.Net/dialup.html - $8.25/mo! -- http://www.usfamily.net/dsl.html - $19.99/mo! ---
KR> Shop Space
The "Pink Baroness", built a Fly Baby in her apartment living room. Jack Hickey built a Fly Baby in a school bus. Another guy I knew built a Midget Mustang in his basement. If you want it, you can do it. I built my first KR in a one car garage. Pat Driscoll Saint Paul, MN patric...@usfamily.net --- http://USFamily.Net/dialup.html - $8.25/mo! -- http://www.usfamily.net/dsl.html - $19.99/mo! ---
KR> Folding Wing Brackets
The problem I see with this type of folding wing is that you still have to remove all of the WAF bolts to fold the wings. My idea is to have the WAF's wrap around the spar with a door hinge type piece where the bolts go through and instead of bolting the wings together with horizontal bolts, there would be one bolt front and one bolt aft that would drop through the hinge and be much easier to remove and replace. Pat Driscoll Saint Paul, MN patric...@usfamily.net --- http://USFamily.Net/dialup.html - $8.25/mo! -- http://www.usfamily.net/dsl.html - $19.99/mo! ---
KR> Friday not KR
OK guys and gals, it's Friday so I get to do this. Any one that saw the "Worlds worst Irish tenor contest on the news last Wed. night or Thurs morning, got a good look at the worlds worst Irish tenor. That be me. It was a real surprise that it went on National TV. It's always been a local show but I gotten calls from AZ, TX, CA and NV, from people I know that saw me on the tube. Guess I'll have to get an agent.:-) Pat Driscoll Saint Paul, MN patric...@usfamily.net --- http://USFamily.Net/dialup.html - $8.25/mo! -- http://www.usfamily.net/dsl.html - $19.99/mo! ---
KR> Not KR
Sorry to put this up when it's not Friday but I'm trying to see if anyone might be going from near LA to the Reno NV area on the 18th or 19th and would have an extra seat open. My granddaughter(23 yrs. old). Needs a ride and also coming back on the 25th or 26th. Thanks, Pat Driscoll Saint Paul, MN patric...@usfamily.net --- http://USFamily.Net/dialup.html - $8.25/mo! -- http://www.usfamily.net/dsl.html - $19.99/mo! ---
KR> Lumbar support
This is a message I received from EAA Ch. 54 . Pat Driscoll Saint Paul, MN patric...@usfamily.net Here's a really clever idea (I thought!) from the Yahoo piper-cub-builders bulletin board, for adding lumbar support to your seat cushion. I don't need it yet myself, but I probably will some day! Best Regards, John -Original Message- From: Sonny [mailto:cubdri...@flyoldplanes.com] Sent: Tuesday, March 08, 2005 7:53 AM To: piper-cub-build...@yahoogroups.com Subject: RE: [piper-cub-builders] Rear Seat Woes..1940 J3 Gary Take the back cushion to your local upholstery shop. Have them sew a pouch five inches wide 4 inches from the bottom. Then insert a blood pressure cuff ( I got mine at Goodwill for $3 ) into the pouch. Shorten the hose to 5 or 6 inches. Instant lumbar support. Just pump the little bulb up and you can sit back there all day. Just a note. Sonny --- http://USFamily.Net/dialup.html - $8.25/mo! -- http://www.usfamily.net/dsl.html - $19.99/mo! ---
KR> Wood
I used Douglas Fir for the tail feathers on my first KR and would have used it on the wing spars if I hadn't already built them. I got the Douglas Fir from the trim wood from an old house that was torn down. It was FREE!!! My inspector, (anyone remember Jack Hickey?) told me to leave it out side for a few weeks to absorb some moisture as the moisture content coming from being inside for so many years was below 2%. Pat Driscoll Saint Paul, MN patric...@usfamily.net --- http://USFamily.Net/dialup.html - $8.25/mo! -- http://www.usfamily.net/dsl.html - $19.99/mo! ---
KR> parachutes
I was certified as a chute packer while in the Air Force Reserves. It is not difficult to do and I would think that if you joined a local sky divers club you could learn and get yourself certified to pack your own chute and you could also get in a few jumps to know what to do if you ever needed to do it. I also do not think you could get out of a KR2 in an emergency. I often wondered why one has to wear a chute to do acrobatics in a Citabria when you can't get out of an aircraft like that either. Pat Driscoll Saint Paul, MN 55102 patric...@usfamily.net --- http://USFamily.Net/dialup.html - $8.25/mo! -- http://www.usfamily.net/dsl.html - $19.99/mo! ---
KR> To laminate or not ...
- Original Message - >Paul Wrote> > >unless you're just talking laminated spar CAPS. > >> If laminations are as strong as I think they are, why couldn't a person laminate a well grained piece of pine for spar caps? Pat Driscoll Saint Paul, MN 55102 patric...@usfamily.net> > ___ > Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp > to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net > please see other KRnet info at http://www.krnet.org/info.html --- http://USFamily.Net/dialup.html - $8.25/mo! -- http://www.usfamily.net/dsl.html - $19.99/mo! ---
KR> Soda
That should read" I will BRING a full keg. - Original Message - From: <patric...@usfamily.net> To: "KR Mailing list" <kr...@mylist.net> Sent: Friday, February 04, 2005 8:07 PM Subject: KR> Soda > I will being a full keg of Amber Bock "Soda" to the gathering. >There will be a donation can on the keg and any money over the cost of the keg will go to the prop fund. > Pat Driscoll > Saint Paul, MN 55102 > patric...@usfamily.net > > > --- http://USFamily.Net/dialup.html - $8.25/mo! -- http://www.usfamily.net/dsl.html - $19.99/mo! --- > ___ > Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp > to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net > please see other KRnet info at http://www.krnet.org/info.html --- http://USFamily.Net/dialup.html - $8.25/mo! -- http://www.usfamily.net/dsl.html - $19.99/mo! ---
KR> Buying wood
Bubba, The first KR I built, I went to the local boat yard in White Bear Lake, MN and bought some Sitka spruce from them. The local FBO at So. St. Paul airport carried aircraft plywood so I was covered all directions. Try a boat building shop in your area but don't tell them you are building an airplane. Pat Driscoll Saint Paul, MN 55102 patric...@usfamily.net - Original Message - From: "Bubba" <mystic...@swbell.net> To: "KRNet" <kr...@mylist.net> Sent: Sunday, February 06, 2005 3:13 AM Subject: KR> Buying wood > A few years ago, the first time I started thinking about building a > KR, there was a bunch of talk about the difficulty of finding > decent sitka spruce. Has that changed any? Because of that, and the need for > more strength, I had decided to use douglas fir. That decision still stands > for the most part, but now I'm thinking I'd rather buy wood locally so I can > get what I need for a weekend without getting slaughtered with shipping. > Doing it that way will reduce the chances of wood getting damaged while > waiting to be used. > > Anyway, is there anyone in/near Houston that knows of a lumberyard that > carries a BUNCH of douglas fir in fairly large lengths? I need 14' minimum, > 16' would be nice so I can true up both ends. > > Hey, here's a thought. How about if I get ahold of my friendly neighborhood > EAA chapter and start bugging them? ;) There's one at CXO where I'm planning > on keeping my KR and whatever spam can we wind up with. > -- > Steve > N205FT > mystic...@swbell.net > He who seeks will find, and he who knocks will be let in. > > > > ___ > Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp > to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net > please see other KRnet info at http://www.krnet.org/info.html --- http://USFamily.Net/dialup.html - $8.25/mo! -- http://www.usfamily.net/dsl.html - $19.99/mo! ---
KR> Warm Air
Hey Mark, We have some warm air coming our way in the next few days,(a little over 40 deg.). As soon as I'm through with it, I'll send it your way Pat Driscoll Saint Paul, MN 55102 patric...@usfamily.net --- http://USFamily.Net/dialup.html - $8.25/mo! -- http://www.usfamily.net/dsl.html - $19.99/mo! ---
KR> Travel
I will be in the San Jose and Manteca CA area in the next two weeks and also in the Fallon NV area part of that time. Anybody in these areas that is building and wouldn't mind having a few minutes of talking and looking, please email me off line. I can't say that I'll be able to come over but if you leave me a phone number I'll call and let you know if I can make it. Thanks, Pat Driscoll Saint Paul, MN 55102 patric...@usfamily.net -- http://USFamily.Net/info - Unlimited Internet - From $8.99/mo! --
KR> Engines
Check these out T1228R T1127RB T0326RB T0112RH T0112RD T0608RD 64 Engine Bloc & Bell T0828ZH Don't know the guy. This appeared in the monthly corvair club newsletter. You can call him direct for info. Jerry Berge (320) 684-2657 I believe he is in Minneapolis, MN Pat Driscoll Saint Paul, MN 55102 patric...@usfamily.net -- http://USFamily.Net/info - Unlimited Internet - From $8.99/mo! --
KR> Cheap Carbon Fiber
>Netters, > >Brian Kraut pointed me to a distributor for discount carbon fiber. The are >offering 282 5.8oz CF in 60" width for $12.50/yard. The only problem is >they require orders of 50+ yards. I am considering ordering some and I >wanted to know if anyone would be interested in participating in the order. >Dean Cooper >Jacksonville, FL >Email me at dean_coo...@bellsouth.net >See my KR project at www.geocities.com/djramccoop1/KR2_Home.html > > > >Dean, I'll take five, (5) yards if available. Patrick Driscoll patric...@usfamily.net >___ >to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net >please see other KRnet info at http://www.krnet.org/info.html -- http://USFamily.Net/info - Unlimited Internet - From $8.99/mo! --