KR> Dr Dean hinges.
http://www.n56ml.com/dean_hinge/ Mark Jones (N886MJ) Stevens Point, WI E-mail: flyk...@charter.net Web: www.flykr2s.com
KR> Dr Dean hinges.
That explains itthe figures are just misleading. Thanks for the response. On May 9, 2012 6:13 PM, "Tony King" wrote: > They definitely are female. It's an Aurora bearing MW-3 (equivalent > to Heim HF-3) and Aircraft Spruce list them for $5.75 each. The > Spruce site doesn't have a diagram of the Aurora part but they do for > the Heim equivalent. No doubt they'd be happy to confirm over the > phone or through their online chat before you buy. > > Cheers, > > Tony > > On 10 May 2012 08:55, jon kimmel wrote: > > This has probably been discussed a hundred times, but I can't seem to > find > > the correct part number for Dr. Dean hinges. The write up I have lists > > mw-3 for the rod end bearings. The figure in the write up shows female > rod > > end bearings. Both aircraft spruce and wyck's describes mw-3 as a male > rod > > end bearing. I need to correct the damage done when the previous owner > let > > someone else demod the hinges...some are still there, some are missing. > > The remaining ones look like female rod end bearings. I don't want to > tear > > the ones remaining out just to verify a part number. Is mw-3 correct? > If > > not does anyone have the correct part number? > > > > Jon Kimmel > > kimm...@cox.net > > ___ > > Search the KRnet Archives at http://mylist.net/private/krnet/ > > to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net > > please see other KRnet info at http://www.krnet.org/info.html > > ___ > Search the KRnet Archives at http://mylist.net/private/krnet/ > to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net > please see other KRnet info at http://www.krnet.org/info.html >
KR> Dr Dean hinges.
http://www.n56ml.com/dean_hinge/ Mark Jones (N886MJ) Stevens Point, WI E-mail: flyk...@charter.net Web: www.flykr2s.com
KR> Dr Dean hinges.
They definitely are female. It's an Aurora bearing MW-3 (equivalent to Heim HF-3) and Aircraft Spruce list them for $5.75 each. The Spruce site doesn't have a diagram of the Aurora part but they do for the Heim equivalent. No doubt they'd be happy to confirm over the phone or through their online chat before you buy. Cheers, Tony On 10 May 2012 08:55, jon kimmel wrote: > This has probably been discussed a hundred times, but I can't seem to find > the correct part number for Dr. Dean hinges. The write up I have lists > mw-3 for the rod end bearings. The figure in the write up shows female rod > end bearings. Both aircraft spruce and wyck's describes mw-3 as a male rod > end bearing. I need to correct the damage done when the previous owner let > someone else demod the hinges...some are still there, some are missing. > The remaining ones look like female rod end bearings. I don't want to tear > the ones remaining out just to verify a part number. Is mw-3 correct? If > not does anyone have the correct part number? > > Jon Kimmel > kimm...@cox.net > ___ > Search the KRnet Archives at http://mylist.net/private/krnet/ > to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net > please see other KRnet info at http://www.krnet.org/info.html
KR> Dr Dean hinges.
This has probably been discussed a hundred times, but I can't seem to find the correct part number for Dr. Dean hinges. The write up I have lists mw-3 for the rod end bearings. The figure in the write up shows female rod end bearings. Both aircraft spruce and wyck's describes mw-3 as a male rod end bearing. I need to correct the damage done when the previous owner let someone else demod the hinges...some are still there, some are missing. The remaining ones look like female rod end bearings. I don't want to tear the ones remaining out just to verify a part number. Is mw-3 correct? If not does anyone have the correct part number? Jon Kimmel kimm...@cox.net
KR> Dr Dean Hinges
A question for Mark Langford: The Dr Dean hinges you have used look like a really neat solution. However I have one query. How do you lock the bolt holding the MW3 Rod end in position? All the others have self locking nuts, but there is no nut to lock here. Peter Drake Hereford UK
KR> Dr Dean Hinges
Peter Drake wrote: A question for Mark Langford: The Dr Dean hinges you have used look like a really neat solution. However I have one query. How do you lock the bolt holding the MW3 Rod end in position? All the others have self locking nuts, but there is no nut to lock here. Peter Drake Hereford UK ___ I just epoxied the bolt and made a little cavity in the foam and filled that with epoxy. For that bolt to turn it would have to break the epoxy bond from bolt to the spar and then turn that chunk of epoxy through the elevator fiberglass skin. Ron Smith Kr2ssxl Buckeye Arizona mercedesm...@yahoo.com http://ronsmith.myphotoalbum.com/albums.php __ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com
KR> Dr Dean Hinges
Peter Drake wrote: >A question for Mark Langford: The Dr Dean hinges you have used look like a >really neat solution. However I have one query. How do you lock the bolt >holding the MW3 Rod end in position? > All the others have self locking nuts, but there is no nut to lock here. Sorry, but I didn't use Dr. Dean hinges. They came along after my time. Don Chisholm (who unsubscribed last week, if I recall) first gave us the idea in an early newsletter while building his first KR1. I tried to make it work but couldn't find exactly the right components. Dean tried harder and made it work. I'll leave that question for somebody that's actually done it to answer. Mine are aluminum but use oilite bushings (shown at http://home.hiwaay.net/~langford/kvs.html ). They are light and work fine. Mark Langford, Huntsville, Alabama see KR2S project N56ML at http://home.hiwaay.net/~langford email to N56ML "at" hiwaay.net
KR> Dr Dean Hinges
On Jan 17, 2007, at 7:44 AM, Mark Langford wrote: > Peter Drake wrote: > >> A question for Mark Langford: The Dr Dean hinges you have used >> look like a >> really neat solution. However I have one query. How do you lock >> the bolt >> holding the MW3 Rod end in position? >> All the others have self locking nuts, but there is no nut to lock >> here. > > Hi Peter I am using dean hinges and I have locked the bolt in position by gluing them with t88 and flox. the hime joint mw3 is held in position by the I bolt which I have also glued in position with nuts and washers of course. Mr. Jones what's your two cents here? Keith and Martha Crawford mar...@simerson.net http://martha.simerson.net
KR> Dr Dean Hinges
It seems that epoxy is the way to go. I was wondering if Loctite on the threads would be acceptable. Peter > Hi Peter > > I am using dean hinges and I have locked the bolt in position by > gluing them with t88 and flox. > the hime joint mw3 is held in position by the I bolt which I have > also glued in position with nuts and washers of course. > > Mr. Jones what's your two cents here? > > > Keith and Martha Crawford > mar...@simerson.net > http://martha.simerson.net
KR> Dr Dean Hinges
Yes, the flox can be used for securing the head of the bolt so it will not turn or you can do as I did and flox the shaft of the bolt through the wood. I did not flox the head of my bolts. I also placed a large diameter washer under the head of the bolt to prevent any pull through or crushing of the wood. If the washer you use overlaps the edge of the spar, simply grind the washer flush. You may use Loctite on the threads if you wish but if you do, do not use the permanent type as some day you may have a need to disassemble the hinges. Plus, even if you do not use Loctite and have floxed the head of the bolt, there is no way that the set up will unscrew itself. Another thing is that when you glue the foam to the spar, you will also be gluing the bolt head then. Mark Jones (N886MJ) Wales, WI My Web site: http://www.flykr2s.com/ Mailto:flyk...@wi.rr.com -Original Message- From: krnet-boun...@mylist.net [mailto:krnet-boun...@mylist.net]On Behalf Of Peter Drake Sent: Wednesday, January 17, 2007 10:19 AM To: KRnet Subject: Re: KR> Dr Dean Hinges It seems that epoxy is the way to go. I was wondering if Loctite on the threads would be acceptable. Peter > Hi Peter > > I am using dean hinges and I have locked the bolt in position by > gluing them with t88 and flox. > the hime joint mw3 is held in position by the I bolt which I have > also glued in position with nuts and washers of course. > > Mr. Jones what's your two cents here? > > > Keith and Martha Crawford > mar...@simerson.net > http://martha.simerson.net ___ Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net please see other KRnet info at http://www.krnet.org/info.html
KR> Dr Dean hinges?
I am using them for my elevator, and rudder, but the ailerons? I have never seen anyone do that. Does anyone have any drawings or photos of such a design? Ron Smith Kr2ssxl Cypress Ca U.S.A. mercedesm...@yahoo.com http://ronsmith.myphotoalbum.com/albums.php - Yahoo! DSL Something to write home about. Just $16.99/mo. or less
KR> dr dean hinges?
I like the idea of dr dean hinges. they are briliant! I know they are used on the tail but is it ok to use on the alerons and flaps? How many should be used if it is ok. jerry getting parts for a kr1.
KR> dr dean hinges?
There is absolutely no reason not to. I did not think to do that on my ailerons but if I had, I would have. I would put one on each end of the aileron and space five or six more evenly in between the two outer ones. Do the same on the flaps and I would think a total of three per flap would be sufficient. This is just my .02 worth and there is no engineering data to back this up. Mark Jones (N886MJ) Wales, WI -Original Message- From: krnet-boun...@mylist.net [mailto:krnet-boun...@mylist.net]On Behalf Of Jerry Morris Sent: Friday, March 04, 2005 8:42 AM To: kr...@mylist.net Subject: KR> dr dean hinges? I like the idea of dr dean hinges. they are briliant! I know they are used on the tail but is it ok to use on the alerons and flaps? How many should be used if it is ok. jerry getting parts for a kr1. ___ Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net please see other KRnet info at http://www.krnet.org/info.html
KR> dr dean hinges?
Somewhere I lost something. What are Dr. Dean hinges? Thanks Kevin
KR> dr dean hinges?
These would also eliminate that gap on the bottom of the aileron when you use piano hinges. Here is the link for the hinges: http://home.hiwaay.net/~langford/dean_hinge/ Mark Jones (N886MJ) Wales, WI -Original Message- From: krnet-bounces+mjones=muellersales@mylist.net [mailto:krnet-bounces+mjones=muellersales@mylist.net]On Behalf Of tinya...@aol.com Sent: Friday, March 04, 2005 9:15 AM To: kr...@mylist.net Subject: Re: KR> dr dean hinges? Somewhere I lost something. What are Dr. Dean hinges? Thanks Kevin ___ Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net please see other KRnet info at http://www.krnet.org/info.html