KR> Folding wings
Belly flap, is not in the true sense, a flap. As I understand it, a flap will give you lift and drag and a belly flap/belly board/speed brake, just gives you drag. It is good to give you a better view of the runway without picking up too much speed. With flaps, you will get both, but from the research I have done, you will not get very much of a lower air speed. If I recall correctly, the most I have heard is 5 MPH and the least is better than 2 MPH. If just putting flaps on the center section stub wing, you may get as much as 3 MPH. Since I have never installed flaps, I can only give you what I have been told by several others who have done it. See N64KR at http://KRBuilder.org - Then click on the pics? Peoples Choice at 2013 - KR Gathering in Mt. Vernon, Il ? MVN Best KR at 2013 - KR Gathering in Mt. Vernon, Il ? MVN Best Interior at 2013 - KR Gathering in Mt. Vernon, Il ? MVN Best Paint at 2013 - KR Gathering in Mt. Vernon, Il ? MVN Best Firwwall Forward at 2013 - KR Gathering in Mt. Vernon, Il ? MVN Daniel R. Heath -?Lexington, SC -Original Message- To get a slower stall speed flaps, belly flap or even a different airfoil (check with the experienced on this) are a solution to slower stall speed.
KR> Folding wings
I completely agree with Marks statements. I had another home built that used spring taper pins..fairly quick and easy to remove but still kept the Sonerai 2 at the airport to avoid eventual wear and tear as well as the inevitable rash and mishaps involved in towing not to mention the real possibility of another driver doing something to cause an accident. To get a slower stall speed flaps, belly flap or even a different airfoil (check with the experienced on this) are a solution to slower stall speed. Doran N186RC Saranac, Michigan U.S.A.
KR> folding wings
Well I was thinking along two separate directions. Have some made and sell them, or, have some built as part of a group build. At this point I am not interest in sharing or selling the plans. With the plans and a sample, building some more is not difficult. I would be most likely trying to do one of the above. I believe that the wing folding mechanism represents only a small part of what is necessary to safely remove manipulate and nest the wings. - Original Message - From: "The Ainsworths" To: "KRnet" Sent: Tuesday, February 23, 2010 10:12 AM Subject: Re: KR> folding wings Orma Glad to see your 'at it'... I am in Canada and wish to have a look at these plans and maybe 'steal' some of it for my design using the wing diheadral start at the boat. I'll pay but not alot...especially if I am only going to see how close it is to mine and put it with my plan set. I'm getting old too, and I may just continue to be a KR 'wannabee'...so it is not a big deal but will be part of a 'batch' of KR people who may be part of a purchase. Good luck... and be careful! Gary - Canada - Original Message - From: "Orma Robbins" To: "KRnet" Sent: Monday, February 22, 2010 10:42 PM Subject: Re: KR> folding wings About those folding wing plans. I Got a set. Still in the envelope with all the ceertified postage stuff. . ___ Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net please see other KRnet info at http://www.krnet.org/info.html
KR> folding wings
Orma Glad to see your 'at it'... I am in Canada and wish to have a look at these plans and maybe 'steal' some of it for my design using the wing diheadral start at the boat. I'll pay but not alot...especially if I am only going to see how close it is to mine and put it with my plan set. I'm getting old too, and I may just continue to be a KR 'wannabee'...so it is not a big deal but will be part of a 'batch' of KR people who may be part of a purchase. Good luck... and be careful! Gary - Canada - Original Message - From: "Orma Robbins" To: "KRnet" Sent: Monday, February 22, 2010 10:42 PM Subject: Re: KR> folding wings About those folding wing plans. I Got a set. Still in the envelope with all the ceertified postage stuff. .
KR> folding wings
About those folding wing plans. I Got a set. Still in the envelope with all the ceertified postage stuff. Every now and then I wake from retirement slumber and reconnect. While looking for other things in my file cabinet, I ran across the set of plans that I purchased from the Col back in 91 (You remember back during the gold rush). First thing I went to was the page with the "NOTICE IS HEREBY GIVEN THAT THE RIGHTS AND PROTECTIONS AFFORDED TO THE MOORE FOLDING WING KIT & PLAN BY LAW IS STRICTLY ENFORCED IF ABRIDGED BY ANY ENTITY7 AND/OR PATENTS FOR PROFIT. EACH ORIGINAL SET OF PLANS WILL BE NUMBERED & SIGNED BY COL. R.W. MOORE." Next comes the Waiver of liability. In this section he says that if you are crazy enough to build and use it don't call him if you get hurt. Missing is any mention of how many I can make with my LEGAL plans. How many do you guys want., and how much U willing to pay. Send me the mock up and tell me how many. PS. Talk is cheap, I might have to ask one of our legal reps Orma N110LR - Original Message - From: "Mark Langford" To: "KRnet" Sent: Wednesday, January 13, 2010 10:58 AM Subject: Re: KR> folding wings After rereading Ray's post, I guess I'll take back that I'll document it all and put it on KRnet. That's Moore's "iintellectual property", so that wouldn't be right. Perhaps he's still on KRnet and would offer those plans. Maybe the raffle idea for that one setup isn't such a bad idea either. If we can't locate him, that may be a different matter, but that's for later. Mark Langford n5...@hiwaay.net website www.n56ml.com ___ Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net please see other KRnet info at http://www.krnet.org/info.html
KR> folding wings
I checked my archives. Unfortunately I have the Ultra Baby Plans, not the Fly Baby ones. Cheers. Pete. Pete wrote: > I do believe I have Fly Baby plans in my archives. > I'll have a bit of a poke around, and if I do, I'll draft up the > appropriate pieces and forward the file to Mark L to do with as he pleases. > Cheers. > Peter Bancks. > Australia. >
KR> folding wings
I do believe I have Fly Baby plans in my archives. I'll have a bit of a poke around, and if I do, I'll draft up the appropriate pieces and forward the file to Mark L to do with as he pleases. Cheers. Peter Bancks. Australia. R. Human wrote: > I believe drawings of > the Fly Baby are included in the early Sport Aviation's - do a search on > Oshkosh 365. You still have to deal with unbolting the WAF's. >
KR> folding wings
R. Human wrote: > Actually Mr. Moore directly copied the wing folding arrangement on the > Bower's Fly Baby and John Monnett's Sonerai. > You still have to deal with unbolting the WAF's. > > > > Thats fine! I don't mind that at all. The main thing I'm interested in is making the process of attaching and stowing the wings easier. This fixture should allow me to handle the wing less, and support it in position while I attach the bolts, which is perfectly acceptable to me. -- Glenn Martin KR2 N1333A Biloxi, MS, 39532 rep...@martekmississippi.com
KR> folding wings
Darn, your right. It sounded to easy. If there is a bidding I want to be involved. la...@lebanair.com -Original Message- From: krnet-boun...@mylist.net [mailto:krnet-boun...@mylist.net] On Behalf Of Mark Langford Sent: Wednesday, January 13, 2010 7:59 AM To: KRnet Subject: Re: KR> folding wings After rereading Ray's post, I guess I'll take back that I'll document it all and put it on KRnet. That's Moore's "iintellectual property", so that wouldn't be right. Perhaps he's still on KRnet and would offer those plans. Maybe the raffle idea for that one setup isn't such a bad idea either. If we can't locate him, that may be a different matter, but that's for later. Mark Langford n5...@hiwaay.net website www.n56ml.com ___ Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net please see other KRnet info at http://www.krnet.org/info.html
KR> folding wings
Thanks Mark, will work for me. la...@lebanair.com -Original Message- From: krnet-boun...@mylist.net [mailto:krnet-boun...@mylist.net] On Behalf Of Mark Langford Sent: Wednesday, January 13, 2010 7:50 AM To: KRnet Subject: Re: KR> folding wings Ray Fuenzalida wrote: > Is it something that should wait for the next Gathering (Dana can use it > as a raffle prize or even a tech session)? Should we try to do something > like a prop bank and everybody that uses it send a payment to Mr. Moore > (let Mark keep it)? If you'll send it to me I'll document it and put it on KRnet so others can build it, assuming it's a reasonable approach to the problem, that is. And I'll bring it to the Gathering as well, and put it on display. Mark Langford n5...@hiwaay.net website www.n56ml.com ___ Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net please see other KRnet info at http://www.krnet.org/info.html
KR> folding wings
Ray could you take a good picture or two of it and post it on the Net. I really would like to see it but I am in Oregon and will have the KR done before I get that far from home. I want a good folding wing or a quick detach for 68KR. Thanks, la...@lebanair.com -Original Message- From: krnet-boun...@mylist.net [mailto:krnet-boun...@mylist.net] On Behalf Of Ray Fuenzalida Sent: Wednesday, January 13, 2010 7:15 AM To: kr...@mylist.net Subject: KR> folding wings Hey Guys, There was an entire deal about 'folding wings" a few years back. Basically a Mr. Moore had a design for folding wings and had offered one free to the KR community. I guess in the hope that the rest of the community would buy his plans from him for any additional sets. There was a raffle and I actually won. However, I have since acquired a hangar and didn't need it but still thought it might be a good option. He never sent me a set of plans but he did send me an actual folding wing set up. it's just set up on the spars to show you how it would work. I have never used it and have now decided that I will never use it. Therefore, in the interest of what Mr. Moore was trying to achieve I will offer it back to the KR community. I don't know the best way to achieve that goal. Is it something that should wait for the next Gathering (Dana can use it as a raffle prize or even a tech session)? Should we try to do something like a prop bank and everybody that uses it send a payment to Mr. Moore (let Mark keep it)? I still have all the original emails from back then if anybody wants to track the story. I don't want to start a thread that will last forever, but I do want to try to do what I can for the group. Thanks. Ray New Orleans ___ Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net please see other KRnet info at http://www.krnet.org/info.html
KR> folding wings
Actually Mr. Moore directly copied the wing folding arrangement on the Bower's Fly Baby and John Monnett's Sonerai. It's no more than a sliding tube with a u joint - the tube slides out at the wing root which provides support for the spar end and allows the wing panel to rotate, the u joint allows the wing to fold back parallel to the fuselage. I believe drawings of the Fly Baby are included in the early Sport Aviation's - do a search on Oshkosh 365. You still have to deal with unbolting the WAF's. Rick Human N202RH Houston, Tx -Original Message- From: krnet-boun...@mylist.net [mailto:krnet-boun...@mylist.net] On Behalf Of Mark Langford Sent: Wednesday, January 13, 2010 9:59 AM To: KRnet Subject: Re: KR> folding wings After rereading Ray's post, I guess I'll take back that I'll document it all and put it on KRnet. That's Moore's "iintellectual property", so that wouldn't be right. Perhaps he's still on KRnet and would offer those plans. Maybe the raffle idea for that one setup isn't such a bad idea either. If we can't locate him, that may be a different matter, but that's for later. Mark Langford n5...@hiwaay.net website www.n56ml.com ___ Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net please see other KRnet info at http://www.krnet.org/info.html
KR> folding wings
I am very in favor of having a "Prop Bank" network for this folding wing design, and many of the other things we use working on our KR's. I for one DEFINITELY could put the knowledge to good use as I need my wings to be folding to make it easier to transport as often as i am anticipating. Keep me in the loop please. Glad to hear your plane is going well. After I finally get my PPL (I anticipate by beginning of summer) I am expecting to get to work on mine. -- Glenn Martin KR2 N1333A Biloxi, MS, 39532 rep...@martekmississippi.com
KR> folding wings
Does that mean we can land on a flattop? Joe From: Mark Langford To: KRnet Sent: Wed, January 13, 2010 7:58:57 AM Subject: Re: KR> folding wings After rereading Ray's post, I guess I'll take back that I'll document it all and put it on KRnet. That's Moore's "iintellectual property", so that wouldn't be right. Perhaps he's still on KRnet and would offer those plans. Maybe the raffle idea for that one setup isn't such a bad idea either. If we can't locate him, that may be a different matter, but that's for later. Mark Langford n5...@hiwaay.net website www.n56ml.com ___ Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net please see other KRnet info at http://www.krnet.org/info.html
KR> folding wings
After rereading Ray's post, I guess I'll take back that I'll document it all and put it on KRnet. That's Moore's "iintellectual property", so that wouldn't be right. Perhaps he's still on KRnet and would offer those plans. Maybe the raffle idea for that one setup isn't such a bad idea either. If we can't locate him, that may be a different matter, but that's for later. Mark Langford n5...@hiwaay.net website www.n56ml.com
KR> folding wings
Ray Fuenzalida wrote: > Is it something that should wait for the next Gathering (Dana can use it > as a raffle prize or even a tech session)? Should we try to do something > like a prop bank and everybody that uses it send a payment to Mr. Moore > (let Mark keep it)? If you'll send it to me I'll document it and put it on KRnet so others can build it, assuming it's a reasonable approach to the problem, that is. And I'll bring it to the Gathering as well, and put it on display. Mark Langford n5...@hiwaay.net website www.n56ml.com
KR> folding wings
Hey Guys, There was an entire deal about 'folding wings" a few years back. Basically a Mr. Moore had a design for folding wings and had offered one free to the KR community. I guess in the hope that the rest of the community would buy his plans from him for any additional sets. There was a raffle and I actually won. However, I have since acquired a hangar and didn't need it but still thought it might be a good option. He never sent me a set of plans but he did send me an actual folding wing set up. it's just set up on the spars to show you how it would work. I have never used it and have now decided that I will never use it. Therefore, in the interest of what Mr. Moore was trying to achieve I will offer it back to the KR community. I don't know the best way to achieve that goal. Is it something that should wait for the next Gathering (Dana can use it as a raffle prize or even a tech session)? Should we try to do something like a prop bank and everybody that uses it send a payment to Mr. Moore (let Mark keep it)? I still have all the original emails from back then if anybody wants to track the story. I don't want to start a thread that will last forever, but I do want to try to do what I can for the group. Thanks. Ray New Orleans
KR> Folding Wings
Ray et al What is the status of the folding wing? A post some time ago read (Archive under 'folding wing'): Gary garyains'at' kwic.com Ed Janssen wrote: We have a winner of the "Folding Wings" plan raffle. The official "drawer" (my wife) pulled the name of Ray Fuenzalida from the hat. Congrats, Ray. Contact RW Moore for your prize. His address is: rwmo...@alltel.net
KR> Folding Wings
Actually, I'm glad you brought it up. I had looked at it and then decided to shelve it as I felt that I would feel safer with permanently attached wings. I did speak with Mr. Moore and ask him if I could transfer my "prize" to some other party and he was agreeable with that. They are his proprietary design, so they can't just be given out to the net at large. But they could be given to some other party who might use them, show them off and Mr. Moore could then sell some designs to other interested parties. Larry, if you think this might be something to set up for the Gathering, I will send the protype I have to you for possible display/distribution. Personally, I use the net as a vast resource. Some of the stuff is great and I can't wait to try it, some of it is just interesting but I would never use it. Ray --- The Ainsworths wrote: > Ray et al > What is the status of the folding wing? > A post some time ago read (Archive under 'folding > wing'): > Gary garyains'at' kwic.com > > Ed Janssen wrote: > We have a winner of the "Folding Wings" plan raffle. > The official > "drawer" (my wife) pulled the name of Ray Fuenzalida > from the hat. > Congrats, Ray. Contact RW Moore for your prize. His > address is: > rwmo...@alltel.net > > ___ > Search the KRnet Archives at > http://www.maddyhome.com/krsrch/index.jsp > to UNsubscribe from KRnet, send a message to > krnet-le...@mylist.net > please see other KRnet info at > http://www.krnet.org/info.html > __ Do you Yahoo!? Meet the all-new My Yahoo! - Try it today! http://my.yahoo.com
KR> Folding wings
So Ray are you then going to offer the plans for those folding wings to the group to allow members to benefit from their development since you are not going to use them? I thought the whole idea was to get them out into the KR public so that they would be seen and the idea grow. Can you not post them on a web page and allow downloads like we can do with the new wing? Seems only fair since the raffle was supposed to be for someone to pioneer their use and you have stated you are not going to use them now. Colin & Bev Rainey KR2(td) N96TA Sanford, FL crain...@cfl.rr.com http://kr-builder.org/Colin/index.html
KR> Folding wings
Perhaps a re-raffle of the folding wing plans would be in order here. But, I think Mr. Moore should be contacted before someone considers posting his plans for everyone to see. How 'bout it Ray and Mr. Moore? Ed Janssen mailto:ejans...@chipsnet.com - Original Message - From: "Colin & Bev Rainey" To: "KRnet" Sent: Saturday, July 31, 2004 5:17 AM Subject: KR> Folding wings > So Ray are you then going to offer the plans for those folding wings to the group to allow members to benefit from their development since you are not going to use them? I thought the whole idea was to get them out into the KR public so that they would be seen and the idea grow. Can you not post them on a web page and allow downloads like we can do with the new wing? Seems only fair since the raffle was supposed to be for someone to pioneer their use and you have stated you are not going to use them now. > > Colin & Bev Rainey > KR2(td) N96TA > Sanford, FL > crain...@cfl.rr.com > http://kr-builder.org/Colin/index.html > ___ > to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net > please see other KRnet info at http://www.krnet.org/info.html >
KR> Folding wings
--- Colin & Bev Rainey wrote: > So Ray are you then going to offer the plans for > those folding wings to the group to allow members to > benefit from their development since you are not > going to use them? I thought the whole idea was to > get them out into the KR public so that they would > be seen and the idea grow. Can you not post them on > a web page and allow downloads like we can do with > the new wing? Seems only fair since the raffle was > supposed to be for someone to pioneer their use and > you have stated you are not going to use them now. > > Colin & Bev Rainey > KR2(td) N96TA > Sanford, FL Why not design your own? Click on this link to see a nice folding wing set-up on a sailplane I photographed at Oshkosh a couple of years ago: http://photos.yahoo.com/alamokr2 There will be three albums, go to 'Aviation' and look at the first photo. It looks like something very similar would work on the KR. You can copy the picture. Click on the photo to make it bigger. Frank = Frank Ross, EAA Chapter 35, San Geronimo, TX RAF Lakenheath, Suffolk, England, UK Visit my photo album at: http://photos.yahoo.com/alamokr2 __ Do you Yahoo!? New and Improved Yahoo! Mail - 100MB free storage! http://promotions.yahoo.com/new_mail
Fw: KR> Folding wings
Colin I , 2nd that. They were meant to be made by the winner, so we could all see the finished unit!! Phillip Matheson mathe...@dodo.com.au Australia VH PKR See our engines and kits at. http://www.vw-engines.com/ http://www.homebuilt-aviation.com/ See my KR at Mark Jones web http://mywebpage.netscape.com/n886mj/pmkr2.html - Original Message - From: "Colin & Bev Rainey" To: "KRnet" Sent: Saturday, July 31, 2004 8:17 PM Subject: KR> Folding wings > So Ray are you then going to offer the plans for those folding wings to the group to allow members to benefit from their development since you are not going to use them? I thought the whole idea was to get them out into the KR public so that they would be seen and the idea grow. Can you not post them on a web page and allow downloads like we can do with the new wing? Seems only fair since the raffle was supposed to be for someone to pioneer their use and you have stated you are not going to use them now. > > Colin & Bev Rainey > KR2(td) N96TA > Sanford, FL > crain...@cfl.rr.com > http://kr-builder.org/Colin/index.html > ___ > to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net > please see other KRnet info at http://www.krnet.org/info.html >
Fw: KR> Folding wings
I'll even bring them to the gathering and the group can decide what to do from there. I agree that they should be used by somebody. Ray --- Phillip Matheson wrote: > Colin > I , 2nd that. > They were meant to be made by the winner, so we > could all see the finished > unit!! > > Phillip Matheson > mathe...@dodo.com.au > Australia > VH PKR > See our engines and kits at. > http://www.vw-engines.com/ > http://www.homebuilt-aviation.com/ > See my KR at Mark Jones web > http://mywebpage.netscape.com/n886mj/pmkr2.html > > > > > > > - Original Message - > From: "Colin & Bev Rainey" > To: "KRnet" > Sent: Saturday, July 31, 2004 8:17 PM > Subject: KR> Folding wings > > > > So Ray are you then going to offer the plans for > those folding wings to > the group to allow members to benefit from their > development since you are > not going to use them? I thought the whole idea was > to get them out into > the KR public so that they would be seen and the > idea grow. Can you not > post them on a web page and allow downloads like we > can do with the new > wing? Seems only fair since the raffle was supposed > to be for someone to > pioneer their use and you have stated you are not > going to use them now. > > > > Colin & Bev Rainey > > KR2(td) N96TA > > Sanford, FL > > crain...@cfl.rr.com > > http://kr-builder.org/Colin/index.html > > ___ > > to UNsubscribe from KRnet, send a message to > krnet-le...@mylist.net > > please see other KRnet info at > http://www.krnet.org/info.html > > > > > ___ > to UNsubscribe from KRnet, send a message to > krnet-le...@mylist.net > please see other KRnet info at > http://www.krnet.org/info.html > __ Do you Yahoo!? Yahoo! Mail Address AutoComplete - You start. We finish. http://promotions.yahoo.com/new_mail
KR> Folding wings
Just read this one. I will contact Mr. Moore and see if it is acceptable for me to give them to someone else. They were given to someone. Will it really matter if it's me? If he says OK, I will bring them to the Gathering and we'll go from there. Ray --- Ed Janssen wrote: > Perhaps a re-raffle of the folding wing plans would > be in order here. But, > I think Mr. Moore should be contacted before someone > considers posting his > plans for everyone to see. How 'bout it Ray and > Mr. Moore? > > Ed Janssen > mailto:ejans...@chipsnet.com > - Original Message - > From: "Colin & Bev Rainey" > To: "KRnet" > Sent: Saturday, July 31, 2004 5:17 AM > Subject: KR> Folding wings > > > > So Ray are you then going to offer the plans for > those folding wings to > the group to allow members to benefit from their > development since you are > not going to use them? I thought the whole idea was > to get them out into > the KR public so that they would be seen and the > idea grow. Can you not > post them on a web page and allow downloads like we > can do with the new > wing? Seems only fair since the raffle was supposed > to be for someone to > pioneer their use and you have stated you are not > going to use them now. > > > > Colin & Bev Rainey > > KR2(td) N96TA > > Sanford, FL > > crain...@cfl.rr.com > > http://kr-builder.org/Colin/index.html > > ___ > > to UNsubscribe from KRnet, send a message to > krnet-le...@mylist.net > > please see other KRnet info at > http://www.krnet.org/info.html > > > > > ___ > to UNsubscribe from KRnet, send a message to > krnet-le...@mylist.net > please see other KRnet info at > http://www.krnet.org/info.html > __ Do you Yahoo!? New and Improved Yahoo! Mail - 100MB free storage! http://promotions.yahoo.com/new_mail
KR> Folding Wings
Hi , -Someone in the UK installed folding wings on a KR2, I'm wondering if this is the same design. -would you send a pic if pos as I am considering this modification. Regards -fiery strumpets - Original Message - From: "Stephen and Janet Henderson" To: "KRnet" Sent: Tuesday, May 11, 2004 12:33 PM Subject: Re: KR> Folding Wings > I actually bought the KR-1 from Mr. Moore this past weekend that has the > folding wing kit installed. I removed the folding wing kit from it on Sunday > afternoon and would be willing to sell it to anyone that is interested. It > is very easy to install, I just don't have a need for folding wings. Please > contact me if you would like some photos or info. > > Thank you, > Stephen Henderson > > > - Original Message - > From: "Ray Fuenzalida" > To: "KRnet" > Sent: Monday, May 10, 2004 11:11 PM > Subject: Re: KR> Folding Wings > > > > I won the folding wings plan from Mr. Moore. He sent > > me his prototype ( which I still have to send back) so > > that I couls make my own. It does look pretty cool. > > Anyone can contact him direct at rmo...@alltel.net > > I believe he is selling the plans. I can tell you > > that they look very simple but effective. I still > > haven't gotten to the point of my wing construction to > > see if I am going to use them (wing tanks seem to be a > > hurdle) but I would really like to incorporate them > > into my setup. When I do the wings, I will post and > > give an update as to what I did. Hope this helps. > > Ray > > > > --- ljhus...@wmconnect.com wrote: > > > I have been gone for awhile and I remember some > > > plans being raffled off for > > > folding wings. I was just wondering if anyone had > > > used these plans and if > > > there are any updates on how they work. Thanks for > > > the information > > > > > > Larry J. Husky > > > ljhus...@wmconnect.com > > > No KR yet Coming soon to an airport near you!!! > > > ___ > > > to UNsubscribe from KRnet, send a message to > > > krnet-le...@mylist.net > > > please see other KRnet info at > > http://www.krnet.org/info.html > > > > > > > > > > > > __ > > Do you Yahoo!? > > Win a $20,000 Career Makeover at Yahoo! HotJobs > > http://hotjobs.sweepstakes.yahoo.com/careermakeover > > > > ___ > > to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net > > please see other KRnet info at http://www.krnet.org/info.html > > > ___ > to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net > please see other KRnet info at http://www.krnet.org/info.html
KR> Folding Wings
I have been gone for awhile and I remember some plans being raffled off for folding wings. I was just wondering if anyone had used these plans and if there are any updates on how they work. Thanks for the information Larry J. Husky ljhus...@wmconnect.com No KR yet Coming soon to an airport near you!!!
KR> Folding Wings
I won the folding wings plan from Mr. Moore. He sent me his prototype ( which I still have to send back) so that I couls make my own. It does look pretty cool. Anyone can contact him direct at rmo...@alltel.net I believe he is selling the plans. I can tell you that they look very simple but effective. I still haven't gotten to the point of my wing construction to see if I am going to use them (wing tanks seem to be a hurdle) but I would really like to incorporate them into my setup. When I do the wings, I will post and give an update as to what I did. Hope this helps. Ray --- ljhus...@wmconnect.com wrote: > I have been gone for awhile and I remember some > plans being raffled off for > folding wings. I was just wondering if anyone had > used these plans and if > there are any updates on how they work. Thanks for > the information > > Larry J. Husky > ljhus...@wmconnect.com > No KR yet Coming soon to an airport near you!!! > ___ > to UNsubscribe from KRnet, send a message to > krnet-le...@mylist.net > please see other KRnet info at http://www.krnet.org/info.html __ Do you Yahoo!? Win a $20,000 Career Makeover at Yahoo! HotJobs http://hotjobs.sweepstakes.yahoo.com/careermakeover
KR> Folding Wings
I actually bought the KR-1 from Mr. Moore this past weekend that has the folding wing kit installed. I removed the folding wing kit from it on Sunday afternoon and would be willing to sell it to anyone that is interested. It is very easy to install, I just don't have a need for folding wings. Please contact me if you would like some photos or info. Thank you, Stephen Henderson - Original Message - From: "Ray Fuenzalida" To: "KRnet" Sent: Monday, May 10, 2004 11:11 PM Subject: Re: KR> Folding Wings > I won the folding wings plan from Mr. Moore. He sent > me his prototype ( which I still have to send back) so > that I couls make my own. It does look pretty cool. > Anyone can contact him direct at rmo...@alltel.net > I believe he is selling the plans. I can tell you > that they look very simple but effective. I still > haven't gotten to the point of my wing construction to > see if I am going to use them (wing tanks seem to be a > hurdle) but I would really like to incorporate them > into my setup. When I do the wings, I will post and > give an update as to what I did. Hope this helps. > Ray > > --- ljhus...@wmconnect.com wrote: > > I have been gone for awhile and I remember some > > plans being raffled off for > > folding wings. I was just wondering if anyone had > > used these plans and if > > there are any updates on how they work. Thanks for > > the information > > > > Larry J. Husky > > ljhus...@wmconnect.com > > No KR yet Coming soon to an airport near you!!! > > ___ > > to UNsubscribe from KRnet, send a message to > > krnet-le...@mylist.net > > please see other KRnet info at > http://www.krnet.org/info.html > > > > > > __ > Do you Yahoo!? > Win a $20,000 Career Makeover at Yahoo! HotJobs > http://hotjobs.sweepstakes.yahoo.com/careermakeover > > ___ > to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net > please see other KRnet info at http://www.krnet.org/info.html
KR> Folding Wings
I would not mind a picture, for interest's sake. Serge Vidal KR2 ZS-WEC - Taildragger, VW powered (2.4 liter, dual electronic ignition) - Total aircraft time: 390h - Aircraft hangared at: Orleans, France - Pilot moaning in: Tunis, Tunisia E-mail: serge.vi...@ate-international.com <mailto:serge.vi...@ate-international.com> -Original Message- From: krnet-bounces+serge.vidal=ate-international@mylist.net [mailto:krnet-bounces+serge.vidal=ate-international@mylist.net]On Behalf Of Stephen and Janet Henderson Sent: Tuesday, May 11, 2004 12:33 To: KRnet Subject: Re: KR> Folding Wings I actually bought the KR-1 from Mr. Moore this past weekend that has the folding wing kit installed. I removed the folding wing kit from it on Sunday afternoon and would be willing to sell it to anyone that is interested. It is very easy to install, I just don't have a need for folding wings. Please contact me if you would like some photos or info. Thank you, Stephen Henderson - Original Message - From: "Ray Fuenzalida" To: "KRnet" Sent: Monday, May 10, 2004 11:11 PM Subject: Re: KR> Folding Wings > I won the folding wings plan from Mr. Moore. He sent > me his prototype ( which I still have to send back) so > that I couls make my own. It does look pretty cool. > Anyone can contact him direct at rmo...@alltel.net > I believe he is selling the plans. I can tell you > that they look very simple but effective. I still > haven't gotten to the point of my wing construction to > see if I am going to use them (wing tanks seem to be a > hurdle) but I would really like to incorporate them > into my setup. When I do the wings, I will post and > give an update as to what I did. Hope this helps. > Ray > > --- ljhus...@wmconnect.com wrote: > > I have been gone for awhile and I remember some > > plans being raffled off for > > folding wings. I was just wondering if anyone had > > used these plans and if > > there are any updates on how they work. Thanks for > > the information > > > > Larry J. Husky > > ljhus...@wmconnect.com > > No KR yet Coming soon to an airport near you!!! > > ___ > > to UNsubscribe from KRnet, send a message to > > krnet-le...@mylist.net > > please see other KRnet info at > http://www.krnet.org/info.html > > > > > > __ > Do you Yahoo!? > Win a $20,000 Career Makeover at Yahoo! HotJobs > http://hotjobs.sweepstakes.yahoo.com/careermakeover > > ___ > to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net > please see other KRnet info at http://www.krnet.org/info.html ___ to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net please see other KRnet info at http://www.krnet.org/info.html
KR> Folding Wings
I would like photos and info on the folding wings. Stephen and Janet Henderson wrote: >I actually bought the KR-1 from Mr. Moore this past weekend that has the >folding wing kit installed. I removed the folding wing kit from it on Sunday >afternoon and would be willing to sell it to anyone that is interested. It >is very easy to install, I just don't have a need for folding wings. Please >contact me if you would like some photos or info. > >Thank you, >Stephen Henderson > > >- Original Message - >From: "Ray Fuenzalida" >To: "KRnet" >Sent: Monday, May 10, 2004 11:11 PM >Subject: Re: KR> Folding Wings > > > > >>I won the folding wings plan from Mr. Moore. He sent >>me his prototype ( which I still have to send back) so >>that I couls make my own. It does look pretty cool. >>Anyone can contact him direct at rmo...@alltel.net >>I believe he is selling the plans. I can tell you >>that they look very simple but effective. I still >>haven't gotten to the point of my wing construction to >>see if I am going to use them (wing tanks seem to be a >>hurdle) but I would really like to incorporate them >>into my setup. When I do the wings, I will post and >>give an update as to what I did. Hope this helps. >>Ray >> >>--- ljhus...@wmconnect.com wrote: >> >> >>>I have been gone for awhile and I remember some >>>plans being raffled off for >>>folding wings. I was just wondering if anyone had >>>used these plans and if >>>there are any updates on how they work. Thanks for >>>the information >>> >>>Larry J. Husky >>>ljhus...@wmconnect.com >>>No KR yet Coming soon to an airport near you!!! >>>___ >>>to UNsubscribe from KRnet, send a message to >>>krnet-le...@mylist.net >>>please see other KRnet info at >>> >>> >>http://www.krnet.org/info.html >> >> >> >> >> >>__ >>Do you Yahoo!? >>Win a $20,000 Career Makeover at Yahoo! HotJobs >>http://hotjobs.sweepstakes.yahoo.com/careermakeover >> >>___ >>to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net >>please see other KRnet info at http://www.krnet.org/info.html >> >> > > >___ >to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net >please see other KRnet info at http://www.krnet.org/info.html > > > >
KR>-folding wings
I've seen it! I was at the Golden West EAA Show in Marysville back in June. There was a very strange bird that caught my attention. It was a Q-200 that had been radically modified. Both the front and mid wings had been removed and a kr-2 wing was installed in the traditional place ( under the cockpit ) , a spring landing gear was added,and if I remember correctly a "T" style horizontal stablizer was added on top of the tail. The reason the owner did this was the Q-200 was to difficult to handle during the ground ops. If all that wasn't strange enough, the thing that caught my eye was the folding wing! I should have paid more attention to the details but I remember he removed the aft spar and main-lower WAF bolts ( and I suppose the ailrons ) and folded the wing strait up. To do this I would think that he would have had to have a pretty wide gap between his wing and stub wing skins. I shoul have paid more attention to detail but it was hot and by the time I saw this plane I was burned-out. I do remember that the craftsmanship ( at least the exterior ) was less than perfect. It is amazing the quality and apperant condition of some of those aircraft. I wouldn't ride in them if my life depended on it, yet they've been around for years with hundreds of hours on them. By the way, I didn't see any kr's there. Paden Waldren Garden Valley, Ca (Placerville area) Making my oun WAF- and soon alum tube wing tanks.