Re: KR> Elevator travel
Netters Check page 59 in the manual. Aileron is +20 and -10 deg, Elevator is +30 and -20 deg, and the Rudder is +30 deg left and right. Pete Klapp, building N729PK, Canton, Ohio From: KRnet on behalf of Paul Visk via KRnet Sent: Tuesday, January 3, 2017 8:52 AM To: KRnet Cc: Paul Visk Subject: Re: KR> Elevator travel I not totally sure. I think it's 20 up and 10 down. ___ Search the KRnet Archives at http://tugantek.com/archmailv2-kr/search. Please see LIST RULES and KRnet info at http://www.krnet.org/info.html. KRNet "Basic" Instructions<http://www.krnet.org/info.html> www.krnet.org Special Instructions for AOL Users. AOL and some other ISPs attempt to control spam through user actions, as well as some automatic controls. Unfortunately, this can ... see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change options KRnet Info Page<http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org> list.krnet.org KRnet is a mailinglist devoted to construction and flying the KR series of homebuilt experimental aircraft. To see the collection of prior postings to the list ... To UNsubscribe from KRnet, send a message to krnet-le...@list.krnet.org ___ Search the KRnet Archives at http://tugantek.com/archmailv2-kr/search. Please see LIST RULES and KRnet info at http://www.krnet.org/info.html. KRNet "Basic" Instructions<http://www.krnet.org/info.html> www.krnet.org Special Instructions for AOL Users. AOL and some other ISPs attempt to control spam through user actions, as well as some automatic controls. Unfortunately, this can ... see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change options KRnet Info Page<http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org> list.krnet.org KRnet is a mailinglist devoted to construction and flying the KR series of homebuilt experimental aircraft. To see the collection of prior postings to the list ... To UNsubscribe from KRnet, send a message to krnet-le...@list.krnet.org ___ Search the KRnet Archives at http://tugantek.com/archmailv2-kr/search. Please see LIST RULES and KRnet info at http://www.krnet.org/info.html. see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change options To UNsubscribe from KRnet, send a message to krnet-le...@list.krnet.org
Re: KR> Elevator travel
page 59 of the KR manual shows 30 degrees UP and 20 degrees DOWN for elevator . Go with what is published. Works fine. Regards Chris Gardiner Sent from my iPad > On Jan 3, 2017, at 8:52 AM, Paul Visk via KRnet wrote: > > I not totally sure. I think it's 20 up and 10 down. I would look it up on > the drawings. > > Paul Visk Belleville Il. > 618-406-4705 > Original message From: Larry Flesner via KRnet > Date: 1/3/17 7:35 AM (GMT-06:00) To: KRnet > Cc: Larry Flesner Subject: Re: > KR> Elevator travel > > >> I am trying to get my elevator angles set what is a good degree of >> travel up and down. > > +++ > > The angles for all the control surfaces are in the manual. If you > don't have a copy you should. If not, I'm sure someone will post > them for you. My plans aren't handy at the moment. > > Larry Flesner > > > ___ > Search the KRnet Archives at http://tugantek.com/archmailv2-kr/search. > Please see LIST RULES and KRnet info at http://www.krnet.org/info.html. > see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change > options > To UNsubscribe from KRnet, send a message to krnet-le...@list.krnet.org > ___ > Search the KRnet Archives at http://tugantek.com/archmailv2-kr/search. > Please see LIST RULES and KRnet info at http://www.krnet.org/info.html. > see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change > options > To UNsubscribe from KRnet, send a message to krnet-le...@list.krnet.org ___ Search the KRnet Archives at http://tugantek.com/archmailv2-kr/search. Please see LIST RULES and KRnet info at http://www.krnet.org/info.html. see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change options To UNsubscribe from KRnet, send a message to krnet-le...@list.krnet.org
Re: KR> Elevator travel
I not totally sure. I think it's 20 up and 10 down. I would look it up on the drawings. Paul Visk Belleville Il. 618-406-4705 Original message From: Larry Flesner via KRnet Date: 1/3/17 7:35 AM (GMT-06:00) To: KRnet Cc: Larry Flesner Subject: Re: KR> Elevator travel > I am trying to get my elevator angles set what is a good degree of > travel up and down. +++ The angles for all the control surfaces are in the manual. If you don't have a copy you should. If not, I'm sure someone will post them for you. My plans aren't handy at the moment. Larry Flesner ___ Search the KRnet Archives at http://tugantek.com/archmailv2-kr/search. Please see LIST RULES and KRnet info at http://www.krnet.org/info.html. see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change options To UNsubscribe from KRnet, send a message to krnet-le...@list.krnet.org ___ Search the KRnet Archives at http://tugantek.com/archmailv2-kr/search. Please see LIST RULES and KRnet info at http://www.krnet.org/info.html. see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change options To UNsubscribe from KRnet, send a message to krnet-le...@list.krnet.org
Re: KR> Elevator travel
I am trying to get my elevator angles set what is a good degree of travel up and down. +++ The angles for all the control surfaces are in the manual. If you don't have a copy you should. If not, I'm sure someone will post them for you. My plans aren't handy at the moment. Larry Flesner ___ Search the KRnet Archives at http://tugantek.com/archmailv2-kr/search. Please see LIST RULES and KRnet info at http://www.krnet.org/info.html. see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change options To UNsubscribe from KRnet, send a message to krnet-le...@list.krnet.org
Fwd: Re: KR> Elevator travel
I finally realized after running a laser line along the edge of the spar that there is a slight bow of about 3/16" forward which needs to be shaved down and reinforced by widening the backup plate. That should do it. It was the repair that created the problem. Thank you for your input which this newbie appreciates. drjay dr jay wrote: Date: Sat, 26 May 2007 07:27:37 -0700 (PDT) From: dr jay Subject: Re: KR> Elevator travel To: KRnet Eric The #44 drawing shows the spar to be untouched but the Photo #29 pg 71 is as described below, so there seems to be a conflict between the drawing and the photo.dang! drjay eric.pi...@starband.net wrote: Take a look at page 46 drawing # 44 I think that will answer your question. Eric Pitts Terre Haute Ind. eric.pitts.mystarband.net > Eric > > There it was as big as life. I probably looked at that page several > times without carefully reading it. > > Incidently, I just happened to notice in the picture on that page that > the elevator spar seems to be cut out where the arm is installed. It > caught my eye because when I repaired my broken spar and attached the > elevator hinges that spar butted right up against the horizontal > stabilizer half of the fitting. That leaves not enough room to bolt the > arm hinge together, but if the picture is correct then I need to make a > cutout of suficient depth to line up the fitting holes. Am I right or > just wishful thinking? > > drjay > > > - Original Message > From: "eric.pi...@starband.net" > To: kr...@mylist.net > Sent: Friday, May 25, 2007 6:10:57 PM > Subject: Re: KR> Elevator travel > > > The plans I am looking at dated May 1986 Page 71 30deg up and 20 deg > down. > > Eric > >> Rich >> >> Thanks for the info. I must have a very old plans book which >> doesn't >> correspond to yours. >> >> drjay >> >> Rich Seifert wrote: >> Hi dr jay >> Elevator travel is up 30 degrees down 20 degrees. You can find it on >> KR-2 Drawing No. 7 which is page 29 in my KR Plans book. >> Have a great one. >> - Original Message - >> From: "dr jay" >> To: "kr2 kr2" >> Sent: Friday, May 25, 2007 2:35 PM >> Subject: KR> Elevator travel >> >> >>> Netters >>> >>> I need to know how many degrees the elevator needs to be able to >>> travel >> both up and down on a KR2. I can't seem to find it anywhere in the >> plans. >>> >>> drjay in sunny arizona >>> >>> >>> - >>> Looking for a deal? Find great prices on flights and hotels with >>> Yahoo! >> FareChase. >>> >> >> >> ___ >> Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp >> to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net >> Post photos, introductions, and For Sale items to >> http://www.kr2forum.com/phpBB2/index.php please see other KRnet info >> at http://www.krnet.org/info.html >> >> >> >> - >> Bored stiff? Loosen up... >> Download and play hundreds of games for free on Yahoo! Games. >> ___ >> Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp >> to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net >> Post photos, introductions, and For Sale items to >> http://www.kr2forum.com/phpBB2/index.php please see other KRnet info >> at http://www.krnet.org/info.html > > > > > ___ > Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp > to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net Post > photos, introductions, and For Sale items to > http://www.kr2forum.com/phpBB2/index.php please see other KRnet info at > http://www.krnet.org/info.html > > > > > No need to miss a message. Get email on-the-go > with Yahoo! Mail for Mobile. Get started. > http://mobile.yahoo.com/mail > ___ > Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp > to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net Post > photos, introductions, and For Sale items to > http://www.kr2forum.com/phpBB2/index.php please see other KRnet info at > http://www.krnet.org/info.html ___ Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp to UNsubscribe