Re: [LARTC] incoming traffic + iptable
Glad that helped. You may want to share the knowledge with the others so I am CCing the list. Just in case someone else is or will be having the same questions. -nik - Original Message - From: mohican 542003 To: Nikolay Kichukov Sent: Friday, March 02, 2007 4:47 PM Subject: Re: [LARTC] incoming traffic + iptable Hello, Thank you very much. I tried it and it works very well. my script is: tc qdisc del dev eth0 ingress tc qdisc add dev eth0 handle : ingress tc filter add dev eth0 parent : protocol ip prio 1 u32 match ip src 172.24.11.14 police index 1 rate 15000kbit burst 15000kbit drop flowid :5002 tc filter add dev eth0 parent : protocol ip prio 1 u32 match ip src 172.24.16.11 police index 1 rate 15000kbit burst 15000kbit drop flowid :5002 tc filter add dev eth0 parent : protocol ip prio 1 u32 match ip src 172.24.100.2 police index 2 rate 15000kbit burst 15000kbit drop flowid :5002 172.24.11.14 and 172.24.16.11 shared 15000kbit for incoming traffic and 172.24.100.2 can receive at 15000kbit. Regards. Olivier. 2007/3/2, Nikolay Kichukov <[EMAIL PROTECTED]>: hello, I used to be wondering the same thing some time ago and also asked the list for help, the answer was that I could use the index option to achieve that. tc filter add ... police index 1 ... tc filter add ... police index 1 ... tc filter add ... police index 1 ... tc filter add ... police index 1 ... So all your rules should have the index parameter and thus the consumed bandwidth will be calculated for all the IPs. However I could not verify that this is actually working. Currently I am not using it, I just tried it once, but did not have time to do measures and calculations. So I cannot confirm if that actualy solves the problem you have. Maybe you can give it a try and let me and the list know if that works as expected? -nik - Original Message - From: mohican 542003 To: Nikolay Kichukov Sent: Thursday, March 01, 2007 9:45 AM Subject: Re: [LARTC] incoming traffic + iptable Hello, I would like something like: tc filter add dev eth0 parent : protocol ip prio 1 u32 match ip src 172.28.54.41/32 match ip src 172.28.54.45/32match ip src 172.28.54.54/32match ip src 172.28.54.80/32 police rate 1kbit burst 1kbit mtu 1500k drop flowid : with several IP address (not consecutive). The only way to do this seems to be with iptables to mark packets ? Thanks, Olivier. 2007/3/1, Nikolay Kichukov <[EMAIL PROTECTED]>: Hello there, Why would you want to mark the packets with iptables in the first place for ingress shaping? Why don't use the tc functionality to specify source and destination addresses and protocol types? I would suggest to leave iptables alone and get your hand on TC for doing traffic control ;-) So in your example: tc qdisc add dev eth0 handle : ingress tc filter add dev eth0 parent : protocol ip prio 1 u32 match ip src 172.28.54.41/32 police rate 1kbit burst 1kbit mtu 1500k drop flowid : Thats an elegant way to achieve what you want. HTH, -nik p.s. Mind the burst parameter, seems huge value to me. - Original Message - From: mohican 542003 To: lartc@mailman.ds9a.nl Sent: Wednesday, February 28, 2007 4:39 PM Subject: [LARTC] incoming traffic + iptable Hello, i try to use iptables to mark packet and then to filter them with tc. Here is my script: iptables -t mangle -A PREROUTING -s 172.28.54.41/32 -p tcp -j MARK --set-mark 1 tc qdisc add dev eth0 handle : ingress tc filter add dev eth0 parent : protocol ip prio 1 handle 1 fw police rate 1kbit burst 1kbit mtu 1500k drop flowid :1 I can not use u32 because i have several filter with more than one IP address in each. Packets seem to be well marked (command: iptables -t mangle -L -vnx) but packets are not filtered with tc. Can someone help me ? Thanks, Olivier. ___ LARTC mailing list LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc ___ LARTC mailing list LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
Re: [LARTC] incoming traffic + iptable
Hello there, Sure tc can do those, I am not sure about layer 7 protocols. I am no tc expert myself ;-( -nik - Original Message - From: "François Delawarde" <[EMAIL PROTECTED]> To: Cc: "Nikolay Kichukov" <[EMAIL PROTECTED]> Sent: Thursday, March 01, 2007 5:03 PM Subject: Re: [LARTC] incoming traffic + iptable > Hello, > I would need to be able to do that, as I think that iptables is more > powerful for classifying traffic you want to police/shape. I don't > really know tc yet, so could you tell if it has the possibility of > detecting: > > - mac addresses > - ip tos/ttl values > - icmp types > - tcp/udp flags/ports or port ranges > - layer 7 protocols > > Thanks for help, > François. > > > Nikolay Kichukov wrote: > > Hello there, > > Why would you want to mark the packets with iptables in the first place for > > ingress shaping? > > Why don't use the tc functionality to specify source and destination > > addresses and protocol types? > > > > I would suggest to leave iptables alone and get your hand on TC for doing > > traffic control ;-) > > > > So in your example: > > > > tc qdisc add dev eth0 handle : ingress > > tc filter add dev eth0 parent : protocol ip prio 1 u32 match ip src > > 172.28.54.41/32 police rate 1kbit burst 1kbit mtu 1500k drop flowid > > : > > > > Thats an elegant way to achieve what you want. > > > > HTH, > > -nik > > > > p.s. Mind the burst parameter, seems huge value to me. > > > > > > - Original Message - > > From: mohican 542003 > > To: lartc@mailman.ds9a.nl > > Sent: Wednesday, February 28, 2007 4:39 PM > > Subject: [LARTC] incoming traffic + iptable > > > > > > Hello, > > > > i try to use iptables to mark packet and then to filter them with tc. Here > > is my script: > > iptables -t mangle -A PREROUTING -s 172.28.54.41/32 -p tcp -j > > MARK --set-mark 1 > > tc qdisc add dev eth0 handle : ingress > > tc filter add dev eth0 parent : protocol ip prio 1 handle 1 fw police > > rate 1kbit burst 1kbit mtu 1500k drop flowid :1 > > > > I can not use u32 because i have several filter with more than one IP > > address in each. > > > > Packets seem to be well marked (command: iptables -t mangle -L -vnx) > > but packets are not filtered with tc. > > > > Can someone help me ? > > > > Thanks, > > > > Olivier. > > > > > > > > > > ___ > > LARTC mailing list > > LARTC@mailman.ds9a.nl > > http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc > > > > ___ > > LARTC mailing list > > LARTC@mailman.ds9a.nl > > http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc > > > > > ___ LARTC mailing list LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
Re: [LARTC] incoming traffic + iptable
Hello, I would need to be able to do that, as I think that iptables is more powerful for classifying traffic you want to police/shape. I don't really know tc yet, so could you tell if it has the possibility of detecting: - mac addresses - ip tos/ttl values - icmp types - tcp/udp flags/ports or port ranges - layer 7 protocols Thanks for help, François. Nikolay Kichukov wrote: Hello there, Why would you want to mark the packets with iptables in the first place for ingress shaping? Why don't use the tc functionality to specify source and destination addresses and protocol types? I would suggest to leave iptables alone and get your hand on TC for doing traffic control ;-) So in your example: tc qdisc add dev eth0 handle : ingress tc filter add dev eth0 parent : protocol ip prio 1 u32 match ip src 172.28.54.41/32 police rate 1kbit burst 1kbit mtu 1500k drop flowid : Thats an elegant way to achieve what you want. HTH, -nik p.s. Mind the burst parameter, seems huge value to me. - Original Message - From: mohican 542003 To: lartc@mailman.ds9a.nl Sent: Wednesday, February 28, 2007 4:39 PM Subject: [LARTC] incoming traffic + iptable Hello, i try to use iptables to mark packet and then to filter them with tc. Here is my script: iptables -t mangle -A PREROUTING -s 172.28.54.41/32 -p tcp -j MARK --set-mark 1 tc qdisc add dev eth0 handle : ingress tc filter add dev eth0 parent : protocol ip prio 1 handle 1 fw police rate 1kbit burst 1kbit mtu 1500k drop flowid :1 I can not use u32 because i have several filter with more than one IP address in each. Packets seem to be well marked (command: iptables -t mangle -L -vnx) but packets are not filtered with tc. Can someone help me ? Thanks, Olivier. ___ LARTC mailing list LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc ___ LARTC mailing list LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc ___ LARTC mailing list LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
Re: [LARTC] incoming traffic + iptable
Hello there, Why would you want to mark the packets with iptables in the first place for ingress shaping? Why don't use the tc functionality to specify source and destination addresses and protocol types? I would suggest to leave iptables alone and get your hand on TC for doing traffic control ;-) So in your example: tc qdisc add dev eth0 handle : ingress tc filter add dev eth0 parent : protocol ip prio 1 u32 match ip src 172.28.54.41/32 police rate 1kbit burst 1kbit mtu 1500k drop flowid : Thats an elegant way to achieve what you want. HTH, -nik p.s. Mind the burst parameter, seems huge value to me. - Original Message - From: mohican 542003 To: lartc@mailman.ds9a.nl Sent: Wednesday, February 28, 2007 4:39 PM Subject: [LARTC] incoming traffic + iptable Hello, i try to use iptables to mark packet and then to filter them with tc. Here is my script: iptables -t mangle -A PREROUTING -s 172.28.54.41/32 -p tcp -j MARK --set-mark 1 tc qdisc add dev eth0 handle : ingress tc filter add dev eth0 parent : protocol ip prio 1 handle 1 fw police rate 1kbit burst 1kbit mtu 1500k drop flowid :1 I can not use u32 because i have several filter with more than one IP address in each. Packets seem to be well marked (command: iptables -t mangle -L -vnx) but packets are not filtered with tc. Can someone help me ? Thanks, Olivier. ___ LARTC mailing list LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc ___ LARTC mailing list LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
[LARTC] incoming traffic + iptable
Hello, i try to use iptables to mark packet and then to filter them with tc. Here is my script: iptables -t mangle -A PREROUTING -s 172.28.54.41/32 -p tcp -j MARK --set-mark 1 tc qdisc add dev eth0 handle : ingress tc filter add dev eth0 parent : protocol ip prio 1 handle 1 fw police rate 1kbit burst 1kbit mtu 1500k drop flowid :1 I can not use u32 because i have several filter with more than one IP address in each. Packets seem to be well marked (command: iptables -t mangle -L -vnx) but packets are not filtered with tc. Can someone help me ? Thanks, Olivier. ___ LARTC mailing list LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc