Re: [LARTC] action redirect and dummy interface
Andy Furniss wrote: Paweł Staszewski wrote: That patch didn't go into kernel and was superseeded by another version which I attach - but AFAIK it's still not in kernel yet and jamal is still working on it. Ok thanks i try your attached patch tommorow and try to do some tests. OK - it's not a patch - just replace drivers/net/dummy.c with the uncompressed attachment. Andy. ok i replace 2.6.14 dummy driver with yours and it is working. thanks again ___ LARTC mailing list LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
Re: [LARTC] action redirect and dummy interface
Paweł Staszewski wrote: That patch didn't go into kernel and was superseeded by another version which I attach - but AFAIK it's still not in kernel yet and jamal is still working on it. Ok thanks i try your attached patch tommorow and try to do some tests. OK - it's not a patch - just replace drivers/net/dummy.c with the uncompressed attachment. Andy. ___ LARTC mailing list LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
Re: [LARTC] action redirect and dummy interface
Andy Furniss wrote: Paweł Staszewski wrote: Hello i have some problems on 2.6.14 kernel dummy and iproute :) i have server with 2 nics : eth0 <> inet eth1 <> lan dummy0 (i want to shape incoming traffic from lan machine on this interface) OK but the script sends both egress and ingress on eth1 to dummy0. Yes i try to send ingress and egress packets from eth1 to dummy my config: tc qdisc del dev dummy0 root tc qdisc add dev dummy0 root handle 1: htb tc class add dev dummy0 parent 1: classid 1:1 htb rate 100kbit ceil 100kbit tc class add dev dummy0 parent 1: classid 1:2 htb rate 100kbit ceil 100kbit tc filter add dev dummy0 protocol ip pref 1 parent 1: handle 1 fw classid 1:1 tc filter add dev dummy0 protocol ip pref 2 parent 1: handle 2 fw classid 1:2 ifconfig dummy0 up tc qdisc del dev eth1 root tc qdisc add dev eth1 root handle 1: htb tc filter add dev eth1 parent 1:0 protocol ip prio 10 u32 \ match ip dst 0/0 flowid 1:1 \ action ipt -j MARK --set-mark 2 \ action mirred egress redirect dev dummy0 tc qdisc del dev eth1 ingress tc qdisc add dev eth1 ingress tc filter add dev eth1 parent : protocol ip prio 10 u32 \ match ip src 0/0 flowid 1:1 \ action ipt -j MARK --set-mark 1 \ action mirred egress redirect dev dummy0 Apart from adding a modprobe this works for me using the attached dummy.c on 2.6.12. I load dummy on system start. and i have only tx-es on dummy0 interface no rx packets and lan machine cannot comunicate with server and vice-versa any solutions ... i readed this post http://oss.sgi.com/projects/netdev/archive/2004-04/msg00251.html and i have the same config ... but :) That patch didn't go into kernel and was superseeded by another version which I attach - but AFAIK it's still not in kernel yet and jamal is still working on it. Andy. Ok thanks i try your attached patch tommorow and try to do some tests. ___ LARTC mailing list LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
Re: [LARTC] action redirect and dummy interface
Paweł Staszewski wrote: Hello i have some problems on 2.6.14 kernel dummy and iproute :) i have server with 2 nics : eth0 <> inet eth1 <> lan dummy0 (i want to shape incoming traffic from lan machine on this interface) OK but the script sends both egress and ingress on eth1 to dummy0. my config: tc qdisc del dev dummy0 root tc qdisc add dev dummy0 root handle 1: htb tc class add dev dummy0 parent 1: classid 1:1 htb rate 100kbit ceil 100kbit tc class add dev dummy0 parent 1: classid 1:2 htb rate 100kbit ceil 100kbit tc filter add dev dummy0 protocol ip pref 1 parent 1: handle 1 fw classid 1:1 tc filter add dev dummy0 protocol ip pref 2 parent 1: handle 2 fw classid 1:2 ifconfig dummy0 up tc qdisc del dev eth1 root tc qdisc add dev eth1 root handle 1: htb tc filter add dev eth1 parent 1:0 protocol ip prio 10 u32 \ match ip dst 0/0 flowid 1:1 \ action ipt -j MARK --set-mark 2 \ action mirred egress redirect dev dummy0 tc qdisc del dev eth1 ingress tc qdisc add dev eth1 ingress tc filter add dev eth1 parent : protocol ip prio 10 u32 \ match ip src 0/0 flowid 1:1 \ action ipt -j MARK --set-mark 1 \ action mirred egress redirect dev dummy0 Apart from adding a modprobe this works for me using the attached dummy.c on 2.6.12. and i have only tx-es on dummy0 interface no rx packets and lan machine cannot comunicate with server and vice-versa any solutions ... i readed this post http://oss.sgi.com/projects/netdev/archive/2004-04/msg00251.html and i have the same config ... but :) That patch didn't go into kernel and was superseeded by another version which I attach - but AFAIK it's still not in kernel yet and jamal is still working on it. Andy. dummy.c.gz Description: GNU Zip compressed data ___ LARTC mailing list LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
Re: [LARTC] action redirect and dummy interface
On Fri, Nov 11, 2005 at 07:33:58AM +0100, Paweł Staszewski wrote: > Hello i have some problems on 2.6.14 kernel dummy and iproute :) [cut] > > and i have only tx-es on dummy0 interface no rx packets and lan machine > cannot comunicate with server and vice-versa > > imho it's better to use imq. -- Tomasz Paszkowski pgp0KJVIY3g9p.pgp Description: PGP signature ___ LARTC mailing list LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
