[leaf-user] Bering 4.1 on WRAP: /dev/hda vs /dev/sda etc
After three or four years of pretty much ignoring LEAF because 3x was *just working* on a couple of Soekris and WRAP boards I'm trying to upgrade the latter to 4.1. And failing. The failure comes because the packages described in leaf.cfg can't be loaded: [ 13.574839] sda: sda1 sda2 sda3 sda4 [ 13.627354] sd 0:0:0:0: [sda] Attached SCSI removable disk LINUXRC: Installing - root: root(nf!) etc: etc(nf!) local: local(nf!) config: config(nf!) configdb: configdb(nf!) moddb: moddb(nf!) - Finished. LINUXRC: Loaded Packages can't run '/etc/init.d/rcS': No such file or directory Please press Enter to activate this console. / # My confusion (and lack of experience with 2.6 kernels on IDE hardware) starts with those sda device nodes. I expect the kernel to create hda devices on a WRAP board, but it created sda devices instead. There are no ide modules to be found -- but docs suggest the 2.6 equivalent is pata_legacy, which lsmod shows is loaded. BTW, I'm booting with grub, so both grub's conf file and leaf.cfg must agree on the device path. I've tried changing both from /dev/hda3 to /dev/sda3 without success. I've also tried manually mounting /dev/sda devices from the recovery console I'm dumped into. No luck -- though when I boot the 3.1 LEAF in /dev/hda2 all partitions are mountable, so I know they're fine. Can anybody point me at docs or otherwise get me started debugging this? Thanks, --Eric -- ** * From the desktop of: Eric House, eeho...@eehouse.org * * Crosswords for Android now in beta: via the Market or xwords.sf.net * ** -- The demand for IT networking professionals continues to grow, and the demand for specialized networking skills is growing even more rapidly. Take a complimentary Learning@Cisco Self-Assessment and learn about Cisco certifications, training, and career opportunities. http://p.sf.net/sfu/cisco-dev2dev leaf-user mailing list: leaf-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/leaf-user Support Request -- http://leaf-project.org/
Re: [leaf-user] Bering 4.1 on WRAP: /dev/hda vs /dev/sda etc
21.10.2011 09:59, Eric House пишет: After three or four years of pretty much ignoring LEAF because 3x was *just working* on a couple of Soekris and WRAP boards I'm trying to upgrade the latter to 4.1. And failing. The failure comes because the packages described in leaf.cfg can't be loaded: [ 13.574839] sda: sda1 sda2 sda3 sda4 [ 13.627354] sd 0:0:0:0: [sda] Attached SCSI removable disk LINUXRC: Installing - root: root(nf!) etc: etc(nf!) local: local(nf!) config: config(nf!) configdb: configdb(nf!) moddb: moddb(nf!) - Finished. LINUXRC: Loaded Packages can't run '/etc/init.d/rcS': No such file or directory Please press Enter to activate this console. / # My confusion (and lack of experience with 2.6 kernels on IDE hardware) starts with those sda device nodes. I expect the kernel to create hda devices on a WRAP board, but it created sda devices instead. There are no ide modules to be found -- but docs suggest the 2.6 equivalent is pata_legacy, which lsmod shows is loaded. Hi. On LEAF 4.x we switched from old, legacy ATA/ATAPI/MFM/RLL drivers to SCSI-like PATA/SATA drivers, which results in changing drive names from hdX to sdX. BTW, I'm booting with grub, so both grub's conf file and leaf.cfg must agree on the device path. I've tried changing both from /dev/hda3 to /dev/sda3 without success. I've also tried manually mounting /dev/sda devices from the recovery console I'm dumped into. No luck -- though when I boot the 3.1 LEAF in /dev/hda2 all partitions are mountable, so I know they're fine. Can anybody point me at docs or otherwise get me started debugging this? Thanks, --Eric What is said in dmesg after mount failure? -- The demand for IT networking professionals continues to grow, and the demand for specialized networking skills is growing even more rapidly. Take a complimentary Learning@Cisco Self-Assessment and learn about Cisco certifications, training, and career opportunities. http://p.sf.net/sfu/cisco-dev2dev leaf-user mailing list: leaf-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/leaf-user Support Request -- http://leaf-project.org/
Re: [leaf-user] Bering 4.1 on WRAP: /dev/hda vs /dev/sda etc
Hi Eric at 21.10.2011 08:59, Eric House wrote: ... BTW, I'm booting with grub, so both grub's conf file and leaf.cfg must agree on the device path. I've tried changing both from /dev/hda3 to /dev/sda3 without success. I've also tried manually mounting /dev/sda devices from the recovery console I'm dumped into. No luck -- though when I boot the 3.1 LEAF in /dev/hda2 all partitions are mountable, so I know they're fine. Can anybody point me at docs or otherwise get me started debugging this? Will send you my configs, you can find your way out of that mess easily. cheers erich smime.p7s Description: S/MIME Kryptografische Unterschrift -- The demand for IT networking professionals continues to grow, and the demand for specialized networking skills is growing even more rapidly. Take a complimentary Learning@Cisco Self-Assessment and learn about Cisco certifications, training, and career opportunities. http://p.sf.net/sfu/cisco-dev2dev leaf-user mailing list: leaf-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/leaf-user Support Request -- http://leaf-project.org/
