[leaf-user] Tulip drivers on Bering 1.0 Stable
Hi, I have been using EigerStein 2-Beta for about three years and have been very satisfied with it. I recently changed ISP's and need to use PPPoE and decided to upgrade to Bering 1.0 Stable. I am using a 100 MHZ Pentium with 40 meg of Ram. I use two Netgear FA311 network cards. I used the tulip driver with Eiger and had no problems, but when I install the driver with Bering (the driver came from the Bering 1.0 stable modules download) I get unresolved symbol messages. I was wondering if the drivers need to be recompiled or if there is something new that I have to do to get the drivers to load. Thanks for the help. I really appreciate all the time that has been put into Leaf. Wayne Fool * This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you have received this email in error please notify the system manager. www.hubbell.com - Hubbell Incorporated * --- This SF.NET email is sponsored by: SourceForge Enterprise Edition + IBM + LinuxWorld = Something 2 See! http://www.vasoftware.com leaf-user mailing list: [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/leaf-user SR FAQ: http://leaf-project.org/pub/doc/docmanager/docid_1891.html
Re: [leaf-user] Tulip drivers on Bering 1.0 Stable
On Thu, 09 Jan 2003 08:18:12 EST Wayne Fool wrote: Hi, I have been using EigerStein 2-Beta for about three years and have been very satisfied with it. I recently changed ISP's and need to use PPPoE and decided to upgrade to Bering 1.0 Stable. I am using a 100 MHZ Pentium with 40 meg of Ram. I use two Netgear FA311 network cards. I used the tulip driver with Eiger and had no problems, but when I install the driver with Bering (the driver came from the Bering 1.0 stable modules download) I get unresolved symbol messages. I was wondering if the drivers need to be recompiled or if there is something new that I have to do to get the drivers to load. There are two versions of tulip.o in the modules directory for Bering 1.0-stable: kernel/drivers/net/tulip/tulip.o net/tulip.o I think one of them *may* depend on pci-scan.o, although that is from memory and I could easily be wrong. I remember having trouble with one of them when I tried them out. I believe the other worked flawlessly and did not have dependencies on other modules. You might give both a try if you haven't already. --Brad --- This SF.NET email is sponsored by: SourceForge Enterprise Edition + IBM + LinuxWorld = Something 2 See! http://www.vasoftware.com leaf-user mailing list: [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/leaf-user SR FAQ: http://leaf-project.org/pub/doc/docmanager/docid_1891.html
Re: [leaf-user] Tulip drivers on Bering 1.0 Stable
Hello! As an aside, don't forget that newer FA311's are not Tulip (DEC 21140) based at all, but rather use a NetGear-specific chip. I use these extensively in my firewalls, and they use the fa311.o driver instead. Tim Massey [EMAIL PROTECTED] wrote on 01/09/2003 06:40:24 PM: You need to insmod pci-scan.o and then tulip.o. It runs fine in my system with 2 DEC cards. --- This SF.NET email is sponsored by: SourceForge Enterprise Edition + IBM + LinuxWorld = Something 2 See! http://www.vasoftware.com leaf-user mailing list: [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/leaf-user SR FAQ: http://leaf-project.org/pub/doc/docmanager/docid_1891.html
Re: [leaf-user] Tulip drivers on Bering 1.0 Stable
You need to insmod pci-scan.o and then tulip.o. It runs fine in my system with 2 DEC cards. --- [EMAIL PROTECTED] wrote: Hi, I have been using EigerStein 2-Beta for about three years and have been very satisfied with it. I recently changed ISP's and need to use PPPoE and decided to upgrade to Bering 1.0 Stable. I am using a 100 MHZ Pentium with 40 meg of Ram. I use two Netgear FA311 network cards. I used the tulip driver with Eiger and had no problems, but when I install the driver with Bering (the driver came from the Bering 1.0 stable modules download) I get unresolved symbol messages. I was wondering if the drivers need to be recompiled or if there is something new that I have to do to get the drivers to load. Thanks for the help. I really appreciate all the time that has been put into Leaf. Wayne Fool * This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you have received this email in error please notify the system manager. www.hubbell.com - Hubbell Incorporated * --- This SF.NET email is sponsored by: SourceForge Enterprise Edition + IBM + LinuxWorld = Something 2 See! http://www.vasoftware.com leaf-user mailing list: [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/leaf-user SR FAQ: http://leaf-project.org/pub/doc/docmanager/docid_1891.html __ Do you Yahoo!? Yahoo! Mail Plus - Powerful. Affordable. Sign up now. http://mailplus.yahoo.com --- This SF.NET email is sponsored by: SourceForge Enterprise Edition + IBM + LinuxWorld = Something 2 See! http://www.vasoftware.com leaf-user mailing list: [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/leaf-user SR FAQ: http://leaf-project.org/pub/doc/docmanager/docid_1891.html