Re:Re: [leaf-user] eth1:Tx timeout! Resetting card
- Original Message - From: Brock Nanson [EMAIL PROTECTED] To: [EMAIL PROTECTED] Cc: [EMAIL PROTECTED] Date: Fri, 12 Jul 2002 06:55:52 -0700 Subject: Re: [leaf-user] eth1:Tx timeout! Resetting card - Original Message - From: Taewoon.Goo [EMAIL PROTECTED] To: [EMAIL PROTECTED] Cc: [EMAIL PROTECTED] Sent: Friday, July 12, 2002 2:57 AM Subject: Re:Re: [leaf-user] eth1:Tx timeout! Resetting card | | - Original Message - | From: Brock Nanson [EMAIL PROTECTED] | To: [EMAIL PROTECTED] | Cc: [EMAIL PROTECTED] | Date: Tue, 9 Jul 2002 21:15:23 -0700 | Subject: Re: [leaf-user] eth1:Tx timeout! Resetting card | | | Date: Wed, 10 Jul 2002 09:17:54 +0900 (KST) | | From: Taewoon.Goo [EMAIL PROTECTED] | | Subject: Re:RE: [leaf-user] eth1:Tx timeout! Resetting card | | To: [EMAIL PROTECTED] | | cc: [EMAIL PROTECTED] | | Organization: | | | | | | - Original Message - | | From: Brock Nanson [EMAIL PROTECTED] | | To: [EMAIL PROTECTED] | | Cc: [EMAIL PROTECTED] | | Date: Tue, 9 Jul 2002 08:31:47 -0700 | | Subject: RE: [leaf-user] eth1:Tx timeout! Resetting card | | | | Date: Sun, 7 Jul 2002 08:07:54 +0900 (KST) | | From: Taewoon.Goo [EMAIL PROTECTED] | | To: [EMAIL PROTECTED] | | Organization: | | Subject: [leaf-user] eth1:Tx timeout! Resetting card.. | | | | Hi, I'm having some trouble making a wireless gateway or router, and | | need some help. | | when I ping to 192.168.0.2(my second pc), Bering puts this message | | repeatedly | | eth1:Tx timeout! Resetting card | | | | what it means and what should i do? | | | | Thanks | | | | ah, my setup is as follows.. | | | | hardware | | eth0 -- realtek 8139 pci | | eth1 -- lucent orinoco 11mbit 802.11b card in a ricoh rl5c475 | | pci-pcmcia adapter. | | | | software | | bering 1.0 rc2 + pcmcia.lrp,wireless.lrp,libm.lrp | | | | | | You don't mention if you have wireutil.lrp on your system. You probably | | should. Also, some choice extracts from your logs would be helpful. | | I'm going to guess that the card isn't coming up during boot properly at | | all. | | | | Brock | | | | | | | | As you say, I added wireutil.lrp on my system. But nothing changed. | | | | In redhat7.3, same error message is occured, but it is doing well as a | gateway. | | ping and masquerading is ok. | | error messages are eth1:Tx error status 4(FID=01E2) at boot time, and | eth1: | | Tx error status 1(FID=017E), eth1:Tx error status 1(FID=0xxx) at ping | time continually. | | | | my logs in /var/log/ is changed. | | | | syslog for example | | | | ## before i ping to 192.168.0.2 | | | | giant hack | | | Jul 10 08:39:21 firewall kernel: 8139too Fast Ethernet driver 0.9.24 | | Jul 10 08:39:21 firewall kernel: PCI: Found IRQ 11 for device 00:10.0 | | Jul 10 08:39:21 firewall kernel: PCI: Sharing IRQ 11 with 00:07.2 | | Jul 10 08:39:21 firewall kernel: PCI: Sharing IRQ 11 with 00:07.3 | | Jul 10 08:39:21 firewall kernel: eth0: RealTek RTL8139 Fast Ethernet at | 0xd8821000, 00:c0:26:73:51:8d, IRQ 11 | | Jul 10 08:39:21 firewall kernel: eth0: Identified 8139 chip type | 'RTL-8139C' | | Jul 10 08:39:21 firewall kernel: eth0: Setting half-duplex based on | auto-negotiated partner ability . | | Jul 10 08:39:21 firewall kernel: Linux PCMCIA Card Services 3.1.33 | | Jul 10 08:39:21 firewall kernel: kernel build: 2.4.18 #9 Sun Apr 7 | 13:54:58 CEST 2002 | | Jul 10 08:39:21 firewall kernel: options: [pci] [cardbus] | | Jul 10 08:39:21 firewall kernel: Intel ISA/PCI/CardBus PCIC probe: | | Jul 10 08:39:21 firewall kernel: PCI: Found IRQ 9 for device 00:0e.0 | | Jul 10 08:39:21 firewall kernel: Ricoh RL5C475 rev 80 PCI-to-CardBus at | slot 00:0e, mem 0xdb003000 | | Jul 10 08:39:21 firewall kernel: host opts [0]: [isa irq] [io 3/6/1] | [mem 3/6/1] [pci irq 9] [lat 32/176] [bus 2/5] | | Jul 10 08:39:21 firewall kernel: ISA irqs (default) = 3,4,5,7,14,15 | PCI status changes | | Jul 10 08:39:21 firewall cardmgr[699]: watching 1 sockets | | Jul 10 08:39:21 firewall cardmgr[700]: starting, version is 3.1.33 | | Jul 10 08:39:21 firewall cardmgr[700]: socket 0: Intersil PRISM2 11 Mbps | Wireless Adapter | | Jul 10 08:39:21 firewall kernel: cs: memory probe 0xa000-0xa0ff: | clean. | | Jul 10 08:39:21 firewall cardmgr[700]: executing: 'insmod | /lib/modules/2.4.18/pcmcia/hermes.o' | | Jul 10 08:39:21 firewall kernel: hermes.c: 16 Jan 2002 David Gibson | [EMAIL PROTECTED] | | Jul 10 08:39:21 firewall cardmgr[700]: + Using | /lib/modules/2.4.18/pcmcia/hermes.o | | Jul 10 08:39:21 firewall cardmgr[700]: executing: 'insmod | /lib/modules/2.4.18/pcmcia/orinoco.o' | | Jul 10 08:39:21 firewall kernel: orinoco.c 0.09b (David Gibson | [EMAIL PROTECTED] and others) | | Jul 10 08:39:21 firewall cardmgr[700]: + Using | /lib/modules/2.4.18/pcmcia/orinoco.o | | Jul 10 08:39:21 firewall cardmgr[700]: executing: 'insmod | /lib/modules/2.4.18/pcmcia/orinoco_cs.o' | | Jul 10 08:39:21 firewall kernel: orinoco_cs.c 0.09b (David
Re:Re: [leaf-user] eth1:Tx timeout! Resetting card
- Original Message - From: Brock Nanson [EMAIL PROTECTED] To: [EMAIL PROTECTED] Cc: [EMAIL PROTECTED] Date: Tue, 9 Jul 2002 21:15:23 -0700 Subject: Re: [leaf-user] eth1:Tx timeout! Resetting card | Date: Wed, 10 Jul 2002 09:17:54 +0900 (KST) | From: Taewoon.Goo [EMAIL PROTECTED] | Subject: Re:RE: [leaf-user] eth1:Tx timeout! Resetting card | To: [EMAIL PROTECTED] | cc: [EMAIL PROTECTED] | Organization: | | | - Original Message - | From: Brock Nanson [EMAIL PROTECTED] | To: [EMAIL PROTECTED] | Cc: [EMAIL PROTECTED] | Date: Tue, 9 Jul 2002 08:31:47 -0700 | Subject: RE: [leaf-user] eth1:Tx timeout! Resetting card | | Date: Sun, 7 Jul 2002 08:07:54 +0900 (KST) | From: Taewoon.Goo [EMAIL PROTECTED] | To: [EMAIL PROTECTED] | Organization: | Subject: [leaf-user] eth1:Tx timeout! Resetting card.. | | Hi, I'm having some trouble making a wireless gateway or router, and | need some help. | when I ping to 192.168.0.2(my second pc), Bering puts this message | repeatedly | eth1:Tx timeout! Resetting card | | what it means and what should i do? | | Thanks | | ah, my setup is as follows.. | | hardware | eth0 -- realtek 8139 pci | eth1 -- lucent orinoco 11mbit 802.11b card in a ricoh rl5c475 | pci-pcmcia adapter. | | software | bering 1.0 rc2 + pcmcia.lrp,wireless.lrp,libm.lrp | | | You don't mention if you have wireutil.lrp on your system. You probably | should. Also, some choice extracts from your logs would be helpful. | I'm going to guess that the card isn't coming up during boot properly at | all. | | Brock | | | | As you say, I added wireutil.lrp on my system. But nothing changed. | | In redhat7.3, same error message is occured, but it is doing well as a gateway. | ping and masquerading is ok. | error messages are eth1:Tx error status 4(FID=01E2) at boot time, and eth1: | Tx error status 1(FID=017E), eth1:Tx error status 1(FID=0xxx) at ping time continually. | | my logs in /var/log/ is changed. | | syslog for example | | ## before i ping to 192.168.0.2 | giant hack | Jul 10 08:39:21 firewall kernel: 8139too Fast Ethernet driver 0.9.24 | Jul 10 08:39:21 firewall kernel: PCI: Found IRQ 11 for device 00:10.0 | Jul 10 08:39:21 firewall kernel: PCI: Sharing IRQ 11 with 00:07.2 | Jul 10 08:39:21 firewall kernel: PCI: Sharing IRQ 11 with 00:07.3 | Jul 10 08:39:21 firewall kernel: eth0: RealTek RTL8139 Fast Ethernet at 0xd8821000, 00:c0:26:73:51:8d, IRQ 11 | Jul 10 08:39:21 firewall kernel: eth0: Identified 8139 chip type 'RTL-8139C' | Jul 10 08:39:21 firewall kernel: eth0: Setting half-duplex based on auto-negotiated partner ability . | Jul 10 08:39:21 firewall kernel: Linux PCMCIA Card Services 3.1.33 | Jul 10 08:39:21 firewall kernel: kernel build: 2.4.18 #9 Sun Apr 7 13:54:58 CEST 2002 | Jul 10 08:39:21 firewall kernel: options: [pci] [cardbus] | Jul 10 08:39:21 firewall kernel: Intel ISA/PCI/CardBus PCIC probe: | Jul 10 08:39:21 firewall kernel: PCI: Found IRQ 9 for device 00:0e.0 | Jul 10 08:39:21 firewall kernel: Ricoh RL5C475 rev 80 PCI-to-CardBus at slot 00:0e, mem 0xdb003000 | Jul 10 08:39:21 firewall kernel: host opts [0]: [isa irq] [io 3/6/1] [mem 3/6/1] [pci irq 9] [lat 32/176] [bus 2/5] | Jul 10 08:39:21 firewall kernel: ISA irqs (default) = 3,4,5,7,14,15 PCI status changes | Jul 10 08:39:21 firewall cardmgr[699]: watching 1 sockets | Jul 10 08:39:21 firewall cardmgr[700]: starting, version is 3.1.33 | Jul 10 08:39:21 firewall cardmgr[700]: socket 0: Intersil PRISM2 11 Mbps Wireless Adapter | Jul 10 08:39:21 firewall kernel: cs: memory probe 0xa000-0xa0ff: clean. | Jul 10 08:39:21 firewall cardmgr[700]: executing: 'insmod /lib/modules/2.4.18/pcmcia/hermes.o' | Jul 10 08:39:21 firewall kernel: hermes.c: 16 Jan 2002 David Gibson [EMAIL PROTECTED] | Jul 10 08:39:21 firewall cardmgr[700]: + Using /lib/modules/2.4.18/pcmcia/hermes.o | Jul 10 08:39:21 firewall cardmgr[700]: executing: 'insmod /lib/modules/2.4.18/pcmcia/orinoco.o' | Jul 10 08:39:21 firewall kernel: orinoco.c 0.09b (David Gibson [EMAIL PROTECTED] and others) | Jul 10 08:39:21 firewall cardmgr[700]: + Using /lib/modules/2.4.18/pcmcia/orinoco.o | Jul 10 08:39:21 firewall cardmgr[700]: executing: 'insmod /lib/modules/2.4.18/pcmcia/orinoco_cs.o' | Jul 10 08:39:21 firewall kernel: orinoco_cs.c 0.09b (David Gibson [EMAIL PROTECTED] and others) | Jul 10 08:39:21 firewall cardmgr[700]: + Using /lib/modules/2.4.18/pcmcia/orinoco_cs.o | Jul 10 08:39:21 firewall kernel: cs: IO port probe 0x0100-0x04ff: excluding 0x170-0x177 0x1f0-0x1f7 0x220-0x22f 0x370-0x37f 0x388-0x38f 0x3c0-0x3df 0x3f0-0x3ff 0x4d0-0x4d7 | Jul 10 08:39:21 firewall kernel: cs: IO port probe 0x0178-0x01ef: clean. | Jul 10 08:39:21 firewall kernel: cs: IO port probe 0x01f8-0x021f: clean. | Jul 10 08:39:21 firewall kernel: cs: IO port probe 0x0230-0x036f: clean. | Jul 10 08:39:21 firewall kernel: cs: IO port probe 0x0380-0x0387: clean. | Jul 10 08:39:21 firewall kernel: cs: IO port probe
Re:Re: [leaf-user] eth1:Tx timeout! Resetting card
- Original Message - From: Chad Carr [EMAIL PROTECTED] To: [EMAIL PROTECTED] Cc: [EMAIL PROTECTED] Date: Wed, 10 Jul 2002 06:31:52 -0700 Subject: Re: [leaf-user] eth1:Tx timeout! Resetting card On Tue, 9 Jul 2002 21:15:23 -0700 Brock Nanson [EMAIL PROTECTED] wrote: The Lucent is NOT a PRISM2 card. The orinoco_cs driver will work with many PRISM2 cards, but I think what this suggests is that the /etc/pcmcia/config file is being checked and the wrong card is found. I don't know if that is causing your problem, but who knows ;-). I had my configuration miss my card at first too, so I deleted all the extra entries from the file... didn't need the other stuff anyway as I won't be using other cards. It eventually settled on using the right entry. http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/ http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Linux.Wireless.drivers.html#WavelanIEEE -- Chad Carr [EMAIL PROTECTED] Your links, especially second, were very useful for me. for your sake, I understood the difference between the orinoco and the prism2. Thank you. - DreamWiz Free Mail @ http://www.dreamwiz.com/ DreamSearch Click the world!!! http://search.dreamwiz.com/ --- This sf.net email is sponsored by:ThinkGeek Gadgets, caffeine, t-shirts, fun stuff. http://thinkgeek.com/sf leaf-user mailing list: [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/leaf-user SR FAQ: http://leaf-project.org/pub/doc/docmanager/docid_1891.html
Re: [leaf-user] eth1:Tx timeout! Resetting card
- Original Message - From: Taewoon.Goo [EMAIL PROTECTED] To: [EMAIL PROTECTED] Cc: [EMAIL PROTECTED] Sent: Friday, July 12, 2002 2:57 AM Subject: Re:Re: [leaf-user] eth1:Tx timeout! Resetting card | | - Original Message - | From: Brock Nanson [EMAIL PROTECTED] | To: [EMAIL PROTECTED] | Cc: [EMAIL PROTECTED] | Date: Tue, 9 Jul 2002 21:15:23 -0700 | Subject: Re: [leaf-user] eth1:Tx timeout! Resetting card | | | Date: Wed, 10 Jul 2002 09:17:54 +0900 (KST) | | From: Taewoon.Goo [EMAIL PROTECTED] | | Subject: Re:RE: [leaf-user] eth1:Tx timeout! Resetting card | | To: [EMAIL PROTECTED] | | cc: [EMAIL PROTECTED] | | Organization: | | | | | | - Original Message - | | From: Brock Nanson [EMAIL PROTECTED] | | To: [EMAIL PROTECTED] | | Cc: [EMAIL PROTECTED] | | Date: Tue, 9 Jul 2002 08:31:47 -0700 | | Subject: RE: [leaf-user] eth1:Tx timeout! Resetting card | | | | Date: Sun, 7 Jul 2002 08:07:54 +0900 (KST) | | From: Taewoon.Goo [EMAIL PROTECTED] | | To: [EMAIL PROTECTED] | | Organization: | | Subject: [leaf-user] eth1:Tx timeout! Resetting card.. | | | | Hi, I'm having some trouble making a wireless gateway or router, and | | need some help. | | when I ping to 192.168.0.2(my second pc), Bering puts this message | | repeatedly | | eth1:Tx timeout! Resetting card | | | | what it means and what should i do? | | | | Thanks | | | | ah, my setup is as follows.. | | | | hardware | | eth0 -- realtek 8139 pci | | eth1 -- lucent orinoco 11mbit 802.11b card in a ricoh rl5c475 | | pci-pcmcia adapter. | | | | software | | bering 1.0 rc2 + pcmcia.lrp,wireless.lrp,libm.lrp | | | | | | You don't mention if you have wireutil.lrp on your system. You probably | | should. Also, some choice extracts from your logs would be helpful. | | I'm going to guess that the card isn't coming up during boot properly at | | all. | | | | Brock | | | | | | | | As you say, I added wireutil.lrp on my system. But nothing changed. | | | | In redhat7.3, same error message is occured, but it is doing well as a | gateway. | | ping and masquerading is ok. | | error messages are eth1:Tx error status 4(FID=01E2) at boot time, and | eth1: | | Tx error status 1(FID=017E), eth1:Tx error status 1(FID=0xxx) at ping | time continually. | | | | my logs in /var/log/ is changed. | | | | syslog for example | | | | ## before i ping to 192.168.0.2 | | | | giant hack | | | Jul 10 08:39:21 firewall kernel: 8139too Fast Ethernet driver 0.9.24 | | Jul 10 08:39:21 firewall kernel: PCI: Found IRQ 11 for device 00:10.0 | | Jul 10 08:39:21 firewall kernel: PCI: Sharing IRQ 11 with 00:07.2 | | Jul 10 08:39:21 firewall kernel: PCI: Sharing IRQ 11 with 00:07.3 | | Jul 10 08:39:21 firewall kernel: eth0: RealTek RTL8139 Fast Ethernet at | 0xd8821000, 00:c0:26:73:51:8d, IRQ 11 | | Jul 10 08:39:21 firewall kernel: eth0: Identified 8139 chip type | 'RTL-8139C' | | Jul 10 08:39:21 firewall kernel: eth0: Setting half-duplex based on | auto-negotiated partner ability . | | Jul 10 08:39:21 firewall kernel: Linux PCMCIA Card Services 3.1.33 | | Jul 10 08:39:21 firewall kernel: kernel build: 2.4.18 #9 Sun Apr 7 | 13:54:58 CEST 2002 | | Jul 10 08:39:21 firewall kernel: options: [pci] [cardbus] | | Jul 10 08:39:21 firewall kernel: Intel ISA/PCI/CardBus PCIC probe: | | Jul 10 08:39:21 firewall kernel: PCI: Found IRQ 9 for device 00:0e.0 | | Jul 10 08:39:21 firewall kernel: Ricoh RL5C475 rev 80 PCI-to-CardBus at | slot 00:0e, mem 0xdb003000 | | Jul 10 08:39:21 firewall kernel: host opts [0]: [isa irq] [io 3/6/1] | [mem 3/6/1] [pci irq 9] [lat 32/176] [bus 2/5] | | Jul 10 08:39:21 firewall kernel: ISA irqs (default) = 3,4,5,7,14,15 | PCI status changes | | Jul 10 08:39:21 firewall cardmgr[699]: watching 1 sockets | | Jul 10 08:39:21 firewall cardmgr[700]: starting, version is 3.1.33 | | Jul 10 08:39:21 firewall cardmgr[700]: socket 0: Intersil PRISM2 11 Mbps | Wireless Adapter | | Jul 10 08:39:21 firewall kernel: cs: memory probe 0xa000-0xa0ff: | clean. | | Jul 10 08:39:21 firewall cardmgr[700]: executing: 'insmod | /lib/modules/2.4.18/pcmcia/hermes.o' | | Jul 10 08:39:21 firewall kernel: hermes.c: 16 Jan 2002 David Gibson | [EMAIL PROTECTED] | | Jul 10 08:39:21 firewall cardmgr[700]: + Using | /lib/modules/2.4.18/pcmcia/hermes.o | | Jul 10 08:39:21 firewall cardmgr[700]: executing: 'insmod | /lib/modules/2.4.18/pcmcia/orinoco.o' | | Jul 10 08:39:21 firewall kernel: orinoco.c 0.09b (David Gibson | [EMAIL PROTECTED] and others) | | Jul 10 08:39:21 firewall cardmgr[700]: + Using | /lib/modules/2.4.18/pcmcia/orinoco.o | | Jul 10 08:39:21 firewall cardmgr[700]: executing: 'insmod | /lib/modules/2.4.18/pcmcia/orinoco_cs.o' | | Jul 10 08:39:21 firewall kernel: orinoco_cs.c 0.09b (David Gibson | [EMAIL PROTECTED] and others) | | Jul 10 08:39:21 firewall cardmgr[700]: + Using | /lib/modules/2.4.18/pcmcia/orinoco_cs.o | | Jul 10 08:39:21 firewall kernel: cs: IO port probe 0x0100-0x04ff
Re: [leaf-user] eth1:Tx timeout! Resetting card
On Tue, 9 Jul 2002 21:15:23 -0700 Brock Nanson [EMAIL PROTECTED] wrote: The Lucent is NOT a PRISM2 card. The orinoco_cs driver will work with many PRISM2 cards, but I think what this suggests is that the /etc/pcmcia/config file is being checked and the wrong card is found. I don't know if that is causing your problem, but who knows ;-). I had my configuration miss my card at first too, so I deleted all the extra entries from the file... didn't need the other stuff anyway as I won't be using other cards. It eventually settled on using the right entry. http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/ http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Linux.Wireless.drivers.html#WavelanIEEE -- Chad Carr [EMAIL PROTECTED] --- This sf.net email is sponsored by:ThinkGeek Two, two, TWO treats in one. http://thinkgeek.com/sf leaf-user mailing list: [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/leaf-user SR FAQ: http://leaf-project.org/pub/doc/docmanager/docid_1891.html
RE: [leaf-user] eth1:Tx timeout! Resetting card
Date: Sun, 7 Jul 2002 08:07:54 +0900 (KST) From: Taewoon.Goo [EMAIL PROTECTED] To: [EMAIL PROTECTED] Organization: Subject: [leaf-user] eth1:Tx timeout! Resetting card.. Hi, I'm having some trouble making a wireless gateway or router, and need some help. when I ping to 192.168.0.2(my second pc), Bering puts this message repeatedly eth1:Tx timeout! Resetting card what it means and what should i do? Thanks ah, my setup is as follows.. hardware eth0 -- realtek 8139 pci eth1 -- lucent orinoco 11mbit 802.11b card in a ricoh rl5c475 pci-pcmcia adapter. software bering 1.0 rc2 + pcmcia.lrp,wireless.lrp,libm.lrp You don't mention if you have wireutil.lrp on your system. You probably should. Also, some choice extracts from your logs would be helpful. I'm going to guess that the card isn't coming up during boot properly at all. Brock --- This sf.net email is sponsored by:ThinkGeek Stuff, things, and much much more. http://thinkgeek.com/sf leaf-user mailing list: [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/leaf-user SR FAQ: http://leaf-project.org/pub/doc/docmanager/docid_1891.html
Re:RE: [leaf-user] eth1:Tx timeout! Resetting card
- Original Message - From: Brock Nanson [EMAIL PROTECTED] To: [EMAIL PROTECTED] Cc: [EMAIL PROTECTED] Date: Tue, 9 Jul 2002 08:31:47 -0700 Subject: RE: [leaf-user] eth1:Tx timeout! Resetting card Date: Sun, 7 Jul 2002 08:07:54 +0900 (KST) From: Taewoon.Goo [EMAIL PROTECTED] To: [EMAIL PROTECTED] Organization: Subject: [leaf-user] eth1:Tx timeout! Resetting card.. Hi, I'm having some trouble making a wireless gateway or router, and need some help. when I ping to 192.168.0.2(my second pc), Bering puts this message repeatedly eth1:Tx timeout! Resetting card what it means and what should i do? Thanks ah, my setup is as follows.. hardware eth0 -- realtek 8139 pci eth1 -- lucent orinoco 11mbit 802.11b card in a ricoh rl5c475 pci-pcmcia adapter. software bering 1.0 rc2 + pcmcia.lrp,wireless.lrp,libm.lrp You don't mention if you have wireutil.lrp on your system. You probably should. Also, some choice extracts from your logs would be helpful. I'm going to guess that the card isn't coming up during boot properly at all. Brock As you say, I added wireutil.lrp on my system. But nothing changed. In redhat7.3, same error message is occured, but it is doing well as a gateway. ping and masquerading is ok. error messages are eth1:Tx error status 4(FID=01E2) at boot time, and eth1: Tx error status 1(FID=017E), eth1:Tx error status 1(FID=0xxx) at ping time continually. my logs in /var/log/ is changed. syslog for example ## before i ping to 192.168.0.2 Jul 10 08:39:21 firewall syslogd 1.3-3#31.slink1: restart. Jul 10 08:39:21 firewall kernel: klogd 1.3-3#31.slink1, log source = /proc/kmsg started. Jul 10 08:39:21 firewall kernel: Cannot find map file. Jul 10 08:39:21 firewall kernel: Loaded 17 symbols from 8 modules. Jul 10 08:39:21 firewall kernel: Linux version 2.4.18 (root@debian) (gcc version 2.95.2 2220 (Debian GNU/Linux)) #1 Sun Apr 21 12:50:34 CEST 2002 Jul 10 08:39:21 firewall kernel: BIOS-provided physical RAM map: Jul 10 08:39:21 firewall kernel: BIOS-e820: - 000a (usable) Jul 10 08:39:21 firewall kernel: BIOS-e820: 000f - 0010 (reserved) Jul 10 08:39:21 firewall kernel: BIOS-e820: 0010 - 17ff (usable) Jul 10 08:39:21 firewall kernel: BIOS-e820: 17ff - 17ff3000 (ACPI NVS) Jul 10 08:39:21 firewall kernel: BIOS-e820: 17ff3000 - 1800 (ACPI data) Jul 10 08:39:21 firewall kernel: BIOS-e820: - 0001 (reserved) Jul 10 08:39:21 firewall kernel: On node 0 totalpages: 98288 Jul 10 08:39:21 firewall kernel: zone(0): 4096 pages. Jul 10 08:39:21 firewall kernel: zone(1): 94192 pages. Jul 10 08:39:21 firewall kernel: zone(2): 0 pages. Jul 10 08:39:21 firewall kernel: Kernel command line: BOOT_IMAGE=linux initrd=initrd.lrp init=/linuxrc root=/dev/ram0 boot=/dev/fd0u1680:msdos PKGPATH=/dev/fd0u1680 LRP=root,etc,local,modules,pump,shorwall,dnscache,libm,wireless,pcmcia,wireutil Jul 10 08:39:21 firewall kernel: Initializing CPU#0 Jul 10 08:39:21 firewall kernel: Detected 451.042 MHz processor. Jul 10 08:39:21 firewall kernel: Console: colour VGA+ 80x25 Jul 10 08:39:21 firewall kernel: Calibrating delay loop... 897.84 BogoMIPS Jul 10 08:39:21 firewall kernel: Memory: 384880k/393152k available (853k kernel code, 7888k reserved, 204k data, 60k init, 0k highmem) Jul 10 08:39:21 firewall kernel: Dentry-cache hash table entries: 65536 (order: 7, 524288 bytes) Jul 10 08:39:21 firewall kernel: Inode-cache hash table entries: 32768 (order: 6, 262144 bytes) Jul 10 08:39:21 firewall kernel: Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) Jul 10 08:39:21 firewall kernel: Buffer-cache hash table entries: 32768 (order: 5, 131072 bytes) Jul 10 08:39:21 firewall kernel: Page-cache hash table entries: 131072 (order: 7, 524288 bytes) Jul 10 08:39:21 firewall kernel: CPU: Before vendor init, caps: 0387f9ff , vendor = 0 Jul 10 08:39:21 firewall kernel: CPU: L1 I cache: 16K, L1 D cache: 16K Jul 10 08:39:21 firewall kernel: CPU: L2 cache: 512K Jul 10 08:39:21 firewall kernel: CPU: After vendor init, caps: 0387f9ff Jul 10 08:39:21 firewall kernel: CPU serial number disabled. Jul 10 08:39:21 firewall kernel: Intel machine check architecture supported. Jul 10 08:39:21 firewall kernel: Intel machine check reporting enabled on CPU#0. Jul 10 08:39:21 firewall kernel: CPU: After generic, caps: 0383f9ff Jul 10 08:39:21 firewall kernel: CPU: Common caps: 0383f9ff Jul 10 08:39:21 firewall kernel: CPU: Intel Pentium III (Katmai) stepping 03 Jul 10 08:39:21 firewall kernel: Enabling fast FPU save and restore... done. Jul 10 08:39:21 firewall kernel: Enabling unmasked SIMD FPU exception support... done. Jul 10 08:39:21 firewall kernel: Checking 'hlt' instruction
Re: [leaf-user] eth1:Tx timeout! Resetting card
| Date: Wed, 10 Jul 2002 09:17:54 +0900 (KST) | From: Taewoon.Goo [EMAIL PROTECTED] | Subject: Re:RE: [leaf-user] eth1:Tx timeout! Resetting card | To: [EMAIL PROTECTED] | cc: [EMAIL PROTECTED] | Organization: | | | - Original Message - | From: Brock Nanson [EMAIL PROTECTED] | To: [EMAIL PROTECTED] | Cc: [EMAIL PROTECTED] | Date: Tue, 9 Jul 2002 08:31:47 -0700 | Subject: RE: [leaf-user] eth1:Tx timeout! Resetting card | | Date: Sun, 7 Jul 2002 08:07:54 +0900 (KST) | From: Taewoon.Goo [EMAIL PROTECTED] | To: [EMAIL PROTECTED] | Organization: | Subject: [leaf-user] eth1:Tx timeout! Resetting card.. | | Hi, I'm having some trouble making a wireless gateway or router, and | need some help. | when I ping to 192.168.0.2(my second pc), Bering puts this message | repeatedly | eth1:Tx timeout! Resetting card | | what it means and what should i do? | | Thanks | | ah, my setup is as follows.. | | hardware | eth0 -- realtek 8139 pci | eth1 -- lucent orinoco 11mbit 802.11b card in a ricoh rl5c475 | pci-pcmcia adapter. | | software | bering 1.0 rc2 + pcmcia.lrp,wireless.lrp,libm.lrp | | | You don't mention if you have wireutil.lrp on your system. You probably | should. Also, some choice extracts from your logs would be helpful. | I'm going to guess that the card isn't coming up during boot properly at | all. | | Brock | | | | As you say, I added wireutil.lrp on my system. But nothing changed. | | In redhat7.3, same error message is occured, but it is doing well as a gateway. | ping and masquerading is ok. | error messages are eth1:Tx error status 4(FID=01E2) at boot time, and eth1: | Tx error status 1(FID=017E), eth1:Tx error status 1(FID=0xxx) at ping time continually. | | my logs in /var/log/ is changed. | | syslog for example | | ## before i ping to 192.168.0.2 | giant hack | Jul 10 08:39:21 firewall kernel: 8139too Fast Ethernet driver 0.9.24 | Jul 10 08:39:21 firewall kernel: PCI: Found IRQ 11 for device 00:10.0 | Jul 10 08:39:21 firewall kernel: PCI: Sharing IRQ 11 with 00:07.2 | Jul 10 08:39:21 firewall kernel: PCI: Sharing IRQ 11 with 00:07.3 | Jul 10 08:39:21 firewall kernel: eth0: RealTek RTL8139 Fast Ethernet at 0xd8821000, 00:c0:26:73:51:8d, IRQ 11 | Jul 10 08:39:21 firewall kernel: eth0: Identified 8139 chip type 'RTL-8139C' | Jul 10 08:39:21 firewall kernel: eth0: Setting half-duplex based on auto-negotiated partner ability . | Jul 10 08:39:21 firewall kernel: Linux PCMCIA Card Services 3.1.33 | Jul 10 08:39:21 firewall kernel: kernel build: 2.4.18 #9 Sun Apr 7 13:54:58 CEST 2002 | Jul 10 08:39:21 firewall kernel: options: [pci] [cardbus] | Jul 10 08:39:21 firewall kernel: Intel ISA/PCI/CardBus PCIC probe: | Jul 10 08:39:21 firewall kernel: PCI: Found IRQ 9 for device 00:0e.0 | Jul 10 08:39:21 firewall kernel: Ricoh RL5C475 rev 80 PCI-to-CardBus at slot 00:0e, mem 0xdb003000 | Jul 10 08:39:21 firewall kernel: host opts [0]: [isa irq] [io 3/6/1] [mem 3/6/1] [pci irq 9] [lat 32/176] [bus 2/5] | Jul 10 08:39:21 firewall kernel: ISA irqs (default) = 3,4,5,7,14,15 PCI status changes | Jul 10 08:39:21 firewall cardmgr[699]: watching 1 sockets | Jul 10 08:39:21 firewall cardmgr[700]: starting, version is 3.1.33 | Jul 10 08:39:21 firewall cardmgr[700]: socket 0: Intersil PRISM2 11 Mbps Wireless Adapter | Jul 10 08:39:21 firewall kernel: cs: memory probe 0xa000-0xa0ff: clean. | Jul 10 08:39:21 firewall cardmgr[700]: executing: 'insmod /lib/modules/2.4.18/pcmcia/hermes.o' | Jul 10 08:39:21 firewall kernel: hermes.c: 16 Jan 2002 David Gibson [EMAIL PROTECTED] | Jul 10 08:39:21 firewall cardmgr[700]: + Using /lib/modules/2.4.18/pcmcia/hermes.o | Jul 10 08:39:21 firewall cardmgr[700]: executing: 'insmod /lib/modules/2.4.18/pcmcia/orinoco.o' | Jul 10 08:39:21 firewall kernel: orinoco.c 0.09b (David Gibson [EMAIL PROTECTED] and others) | Jul 10 08:39:21 firewall cardmgr[700]: + Using /lib/modules/2.4.18/pcmcia/orinoco.o | Jul 10 08:39:21 firewall cardmgr[700]: executing: 'insmod /lib/modules/2.4.18/pcmcia/orinoco_cs.o' | Jul 10 08:39:21 firewall kernel: orinoco_cs.c 0.09b (David Gibson [EMAIL PROTECTED] and others) | Jul 10 08:39:21 firewall cardmgr[700]: + Using /lib/modules/2.4.18/pcmcia/orinoco_cs.o | Jul 10 08:39:21 firewall kernel: cs: IO port probe 0x0100-0x04ff: excluding 0x170-0x177 0x1f0-0x1f7 0x220-0x22f 0x370-0x37f 0x388-0x38f 0x3c0-0x3df 0x3f0-0x3ff 0x4d0-0x4d7 | Jul 10 08:39:21 firewall kernel: cs: IO port probe 0x0178-0x01ef: clean. | Jul 10 08:39:21 firewall kernel: cs: IO port probe 0x01f8-0x021f: clean. | Jul 10 08:39:21 firewall kernel: cs: IO port probe 0x0230-0x036f: clean. | Jul 10 08:39:21 firewall kernel: cs: IO port probe 0x0380-0x0387: clean. | Jul 10 08:39:21 firewall kernel: cs: IO port probe 0x0390-0x03bf: clean. | Jul 10 08:39:21 firewall kernel: cs: IO port probe 0x03e0-0x03ef: clean. | Jul 10 08:39:21 firewall kernel: cs: IO port probe 0x0400-0x04cf: clean. | Jul 10 08:39:21 firewall kernel: cs
[leaf-user] eth1:Tx timeout! Resetting card..
Hi, I'm having some trouble making a wireless gateway or router, and need some help. when I ping to 192.168.0.2(my second pc), Bering puts this message repeatedly eth1:Tx timeout! Resetting card what it means and what should i do? Thanks ah, my setup is as follows.. hardware eth0 -- realtek 8139 pci eth1 -- lucent orinoco 11mbit 802.11b card in a ricoh rl5c475 pci-pcmcia adapter. software bering 1.0 rc2 + pcmcia.lrp,wireless.lrp,libm.lrp configuration #/etc/interfaces auto lo iface lo inet loopback auto eth0 iface eth0 inet static address 211.111.135.82(not real) masklen 24 broadcast 211.111.135.255 gateway 211.111.135.65 iface eth1 inet static address 192.168.0.1 masklen 24 broadcast 192.168.0.255 #/etc/default/pcmcia PCMCIA=yes PCIC=i82365 PCIC_OPTS= CORE_OPTS= CARDMGR_OP #/etc/pcmcia/network.opts case $ADDRESS in *,*,*,*) INFO=sample Wireless IPADDR=192.168.0.1 NETMASK=255.255.255.0 NETWORK=192.168.0.0 BROADCAST=192.168.0.255 ;; esac #/etc/pcmcia/wireless.opts case $ADDRESS in *,*,*,*) INFO=Orinoco MODE=Ad-Hoc CHANNEL=10 RATE=11M ESSID=test IWCONFIG=nick HOME ;; esac - DreamWiz Free Mail @ http://www.dreamwiz.com/ DreamSearch Click the world!!! http://search.dreamwiz.com/ --- This sf.net email is sponsored by:ThinkGeek Got root? We do. http://thinkgeek.com/sf leaf-user mailing list: [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/leaf-user SR FAQ: http://leaf-project.org/pub/doc/docmanager/docid_1891.html
