Re: Magnate router bits
Hello Bill It looks like they do, and always did make these bits, Its just That I never seen them before. I own a two bearing reeding bits, the 1/4 radius and the 3/16 radius, perhaps the 3/8 one or larger will work for my plans? In the worst case I can go the route that Mike did? and make my own. I know the look that I want, but all the details are still a little sketchy at this point. ;- ) I wish that I could aford $5000 worth of router bits. (I know what you went through to get those, And I dont want to go there.) ;-) Thanks for your reply Bill. Im always trying to keep an eye open to any new equipment that I can find. (with a budget in mind.) Have a GREAT DAY. C.A.G . - Original Message - I thought magnate always sold these but i could be wrong I remembr seeing them when I bought $5000 worth of bits after the fire about a year ago. I have not seen anything like what your looking for perhaps you can get one of magnates bits ground to suit your needs Bill From: legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of CURTIS GEORGE Sent: Wednesday, 26 March 2014 7:48 AM To: Legacy-Ornamental-Mills Subject: Magnate router bits http://www.magnate.net/ProductDetails.asp?ProductCode=PG1043 Item# Item Name Our Price Qty Add 7691 7691: Cutting Height:1-1/8; Bead Height:3/8; Shank Diameter:1/2; Shank Length:5; Radius:3/16; $39.30 1 [ ] 7692 7692: Cutting Height:1-1/4; Bead Height:1/2; Shank Diameter:1/2; Shank Length:5; Radius:1/4; $44.66 1 [ ] 7693 7693: Cutting Height:1-1/2; Radius:3/8; Bead Height:3/4; Shank Diameter:1/2; Shank Length:5; $50.05 1 [ ] 7696 7696: Cutting Height:1; Bead Height:1/4; Shank Diameter:1/2; Shank Length:5; Radius:1/8; $35.97 1 [ ] 7697 7697: Cutting Height:1-3/4; Radius:1/2; Bead Height:1; Shank Diameter:1/2; Shank Length:5; $56.61 1 [ ] Check the items you wish to purchase, then click Extended Side Reeding Router Bit, 2 Flute Carbide Tipped border=0 / Hello everyone, I just found a few bits on Mangate web side that Ive not seen before. I own a few Reeding bits that Magnate sells, but these bits have bearings, I did not know that thay sold these bits with out bearing. As I can see the only bit 7697 1/2 radius, is the only bit that is not covered by the other set Item# Item Name Our Price Qty Add 7671 7671: Bead Height:3/8; Shank Diameter:1/2; Shank Length:5; Radius:3/16; $38.81 1 [ ] 7672 7672: Bead Height:1/2; Shank Diameter:1/2; Shank Length:5; Radius:1/4; $44.29 1 [ ] 7673 7673: Bead Height:3/4; Shank Diameter:1/2; Shank Length:5; Radius:3/8; $50.22 1 [ ] 7675 7675: Bead Height:5/8; Shank Diameter:1/2; Shank Length:5; Radius:5/16; $46.81 1 [ ] 7676 7676: Bead Height:1/4; Shank Diameter:1/2; Shank Length:5; Radius:1/8; $35.48 1 [ ] 7678 7678: Bead Height:3/16; Shank Diameter:1/2; Shank Length:5; Radius:3/32; $33.23 1 [ ] Check the items you wish to purchase, then click Side Reeding Carbide Tipped Router Bit, 2 Flute border=0 / Ive been looking for a reeding bit what a good sized radius but one with a small bead hight, (I dont want a deap cut, but one with a well defined radius, To me it looks like the 3/8 radius is the best choice for my project. The purpose of this message is two-fold, One to let you all know what I found, and did not know that Magnate sells, and the Other is to ask you all if you know any other router bit company that sells a bit like what Im looking for. Thanks a lot. I hope everyone has a good day. Now,Go out there and making saw dust. ;-) C.A.G. No virus found in this message. Checked by AVG - www.avg.com Version: 2014.0.4354 / Virus Database: 3722/7243 - Release Date: 03/25/14 No virus found in this message. Checked by AVG - www.avg.com Version: 2014.0.4354 / Virus Database: 3722/7243 - Release Date: 03/25/14 -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com . To post to this group, send email to legacy-ornamental-mills@googlegroups.com . Visit this group at http://groups.google.com/group/legacy-ornamental-mills . For more options, visit https://groups.google.com/d/optout . -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com . To post to this group,
RE: Magnate router bits
Yes the first time round that 5K of bits took years and years to get. needless to say this time round magnate liked me a lot that week lolol But I must say $10 worth of bits or 5K worth they treat their orders with the same professionalism a truly great company to deal with. It’s a shame they don’t do any legacy parts much anymore as well I always got what I asked for every time. Bill From: legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of CURTIS GEORGE Sent: Wednesday, 26 March 2014 6:44 PM To: legacy-ornamental-mills@googlegroups.com Subject: Re: Magnate router bits Hello Bill It looks like they do, and always did make these bits, Its just That I never seen them before. I own a two bearing reeding bits, the 1/4 radius and the 3/16 radius, perhaps the 3/8 one or larger will work for my plans? In the worst case I can go the route that Mike did? and make my own. I know the look that I want, but all the details are still a little sketchy at this point. ;-) I wish that I could aford $5000 worth of router bits. (I know what you went through to get those, And I dont want to go there.) ;-) Thanks for your reply Bill. Im always trying to keep an eye open to any new equipment that I can find. (with a budget in mind.) Have a GREAT DAY. C.A.G. _ I thought magnate always sold these but i could be wrong I remembr seeing them when I bought $5000 worth of bits after the fire about a year ago. I have not seen anything like what your looking for perhaps you can get one of magnates bits ground to suit your needs Bill From: legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of CURTIS GEORGE Sent: Wednesday, 26 March 2014 7:48 AM To: Legacy-Ornamental-Mills Subject: Magnate router bits http://www.magnate.net/ProductDetails.asp?ProductCode=PG1043 Item# Item Name Our Price Qty Add 7691 http://www.magnate.net/v/vspfiles/photos/7691-2.jpg 7691: Cutting Height:1-1/8; Bead Height:3/8; Shank Diameter:1/2; Shank Length:5; Radius:3/16; $39.30 1 [ ] 7692 http://www.magnate.net/v/vspfiles/photos/7692-2.jpg 7692: Cutting Height:1-1/4; Bead Height:1/2; Shank Diameter:1/2; Shank Length:5; Radius:1/4; $44.66 1 [ ] 7693 http://www.magnate.net/v/vspfiles/photos/7693-2.jpg 7693: Cutting Height:1-1/2; Radius:3/8; Bead Height:3/4; Shank Diameter:1/2; Shank Length:5; $50.05 1 [ ] 7696 http://www.magnate.net/v/vspfiles/photos/7696-2.jpg 7696: Cutting Height:1; Bead Height:1/4; Shank Diameter:1/2; Shank Length:5; Radius:1/8; $35.97 1 [ ] 7697 http://www.magnate.net/v/vspfiles/photos/7697-2.jpg 7697: Cutting Height:1-3/4; Radius:1/2; Bead Height:1; Shank Diameter:1/2; Shank Length:5; $56.61 1 [ ] Check the items you wish to purchase, then click http://www.magnate.net/v/vspfiles/templates/134/images/buttons/btn_addtocart.gif Extended Side Reeding Router Bit, 2 Flute Carbide Tipped border=0 / Hello everyone, I just found a few bits on Mangate web side that Ive not seen before. I own a few Reeding bits that Magnate sells, but these bits have bearings, I did not know that thay sold these bits with out bearing. As I can see the only bit 7697 1/2 radius, is the only bit that is not covered by the other set Item# Item Name Our Price Qty Add 7671 http://www.magnate.net/v/vspfiles/photos/7671-2.jpg 7671: Bead Height:3/8; Shank Diameter:1/2; Shank Length:5; Radius:3/16; $38.81 1 [ ] 7672 http://www.magnate.net/v/vspfiles/photos/7672-2.jpg 7672: Bead Height:1/2; Shank Diameter:1/2; Shank Length:5; Radius:1/4; $44.29 1 [ ] 7673 http://www.magnate.net/v/vspfiles/photos/7673-2.jpg 7673: Bead Height:3/4; Shank Diameter:1/2; Shank Length:5; Radius:3/8; $50.22 1 [ ] 7675 http://www.magnate.net/v/vspfiles/photos/7675-2.jpg 7675: Bead Height:5/8; Shank Diameter:1/2; Shank Length:5; Radius:5/16; $46.81 1 [ ] 7676 http://www.magnate.net/v/vspfiles/photos/7676-2.jpg 7676: Bead Height:1/4; Shank Diameter:1/2; Shank Length:5; Radius:1/8; $35.48 1 [ ] 7678 http://www.magnate.net/v/vspfiles/photos/7678-2.jpg 7678: Bead Height:3/16; Shank Diameter:1/2; Shank Length:5; Radius:3/32; $33.23 1 [ ] Check the items you wish to purchase, then click http://www.magnate.net/v/vspfiles/templates/134/images/buttons/btn_addtocart.gif Side Reeding Carbide Tipped Router Bit, 2 Flute border=0 / Ive been looking for a reeding bit what a good sized radius but one with a small bead hight, (I dont want a deap cut, but one with a well defined radius, To me it looks like the 3/8 radius is the best choice for my project. The purpose of this message is two-fold, One to let you all know what I found, and did not know that Magnate sells, and the Other is to ask you all if you know any other router bit company that sells a bit like what Im looking for. Thanks a lot. I hope everyone has a good day.
Re: Magnate router bits
MCLS is a place that i have ordered some of my router bits. They do make some that fit the legacy type of milling. Take a look around their site to see if they may have what you are looking for. Some bits look to be a little cheaper than Magnate and some more. Attached is a link to another one of their new products that looks interesting to me to make a Z-axis. I have not had the shop time lately to investigate to see if this will fit on the plate of the 1000 unit that i have, but this looks to be much more beefy construction that some of the other router mounts in the past that I have considered. http://www.mlcswoodworking.com/shopsite_sc/store/html/smarthtml/pages/u-turn-lift.html -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout.
Re: Magnate router bits
Thank you Dexter. I will take a look , at the router bits. As far as your Z axis idea, its one that I have had as well in the past, The only problem that I can see what this, I just dont see much of an advantage of using it, Meaning, Yes it looks solidly built, and Im sure that tight tolerances will be easily make-able., But you will not be able to get any more depth of cut than what you already have with the plunge router. Of a matter of course you could modify that unit, but is the work worth the effort??? (that's a personal choice that only you can make.) To tell you the truth, I too, am on the quest of making myself a better Z axis for my 1000ex as well. I will let you and everyone know how my project works out, After Im done. ;-) I wish you luck, and a good night. talk to you more latter. C.A.G. - Original Message - MCLS is a place that i have ordered some of my router bits. They do make some that fit the legacy type of milling. Take a look around their site to see if they may have what you are looking for. Some bits look to be a little cheaper than Magnate and some more. blockquote Attached is a link to another one of their new products that looks interesting to me to make a Z-axis. I have not had the shop time lately to investigate to see if this will fit on the plate of the 1000 unit that i have, but this looks to be much more beefy construction that some of the other router mounts in the past that I have considered. /blockquote http://www.mlcswoodworking.com/shopsite_sc/store/html/smarthtml/pages/u-turn-lift.html -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com . To post to this group, send email to legacy-ornamental-mills@googlegroups.com . Visit this group at http://groups.google.com/group/legacy-ornamental-mills . For more options, visit https://groups.google.com/d/optout . -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout.
Re: Magnate router bits
Thank you Dexter. I will take a look , at the router bits. As far as your Z axis idea, its one that I have had as well in the past, The only problem that I can see what this, I just dont see any advantage with it, Meaning, Yes it looks solidly built, and Im sure that tight tolerances will be easily make-able., But you will not be able to get any more depth of cut than what you already have with the plunge router. Of a matter of course you could modify that unit, but is the work worth the effort??? (that's a personal choice that only you can make.) To tell you the truth, I too, am on the quest of making a better Z axis for my 1000ex as well. I will let you and everyone know how my project works out, After Im done. ;-) - Original Message - MCLS is a place that i have ordered some of my router bits. They do make some that fit the legacy type of milling. Take a look around their site to see if they may have what you are looking for. Some bits look to be a little cheaper than Magnate and some more. blockquote Attached is a link to another one of their new products that looks interesting to me to make a Z-axis. I have not had the shop time lately to investigate to see if this will fit on the plate of the 1000 unit that i have, but this looks to be much more beefy construction that some of the other router mounts in the past that I have considered. /blockquote http://www.mlcswoodworking.com/shopsite_sc/store/html/smarthtml/pages/u-turn-lift.html -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com . To post to this group, send email to legacy-ornamental-mills@googlegroups.com . Visit this group at http://groups.google.com/group/legacy-ornamental-mills . For more options, visit https://groups.google.com/d/optout . -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout.
