RE: Ebay last minute mill
A little weak really can you show me the link to a right size one so i can compare Bill From: legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Tim Krause Sent: Friday, 20 February 2015 3:35 AM To: legacy-ornamental-mills@googlegroups.com Subject: Re: Ebay last minute mill That's an interesting find Bill. It might be a little weak. For reference, Legacy used Dayton/Grainger motor 4Z131. There is several on Ebay at this moment. -Tim - Original Message - From: Bill mailto:bulke...@mmnet.com.au Bulkeley To: legacy-ornamental-mills@googlegroups.com Sent: Thursday, February 19, 2015 7:53 AM Subject: RE: Ebay last minute mill Practically nothing is available from legacy but motors like this one from ebay can be made to fit http://www.ebay.com/itm/Dayton-Model-1LPW5-DC-Gear-Motor-93-RPM-1-30-hp-90VDC-4Z539-/400597146141?pt=LH_DefaultDomain_0 http://www.ebay.com/itm/Dayton-Model-1LPW5-DC-Gear-Motor-93-RPM-1-30-hp-90VDC-4Z539-/400597146141?pt=LH_DefaultDomain_0hash=item5d45735a1d hash=item5d45735a1d even a controller and most likely limit switches too if you look Bill From: legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Tom Dotta Sent: Friday, 20 February 2015 2:13 AM To: legacy-ornamental-mills@googlegroups.com Subject: Re: Ebay last minute mill Hello All Possibly I could do the same for the drive setup,That one was too far away. Will someone please reference me to the location for the information regarding the parts required and their assembly. I have a 900 as well as an old 6' steel rail #??? mostly unused as the elbow doesn't cotton to the cranking bit. Thanks CheersTom Dotta On Wed, Feb 18, 2015 at 5:24 PM, Bill Bulkeley bulke...@mmnet.com.au wrote: Yea if it keeps going I will be able to buy a whole mill just to get my ball bearing headstock And still not over pay (I’m still looking for one) Bill From: legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Tim Krause Sent: Thursday, 19 February 2015 12:22 PM To: legacy-ornamental-mills@googlegroups.com Subject: Re: Ebay last minute mill No, I have an extra 1000 exl with stand and motor and hate to think how the market is losing it's value. -Tim - Original Message - From: Bill Bulkeley mailto:bulke...@mmnet.com.au To: legacy-ornamental-mills@googlegroups.com Sent: Wednesday, February 18, 2015 5:17 PM Subject: RE: Ebay last minute mill Was it you Tim?? From: legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Tim Krause Sent: Thursday, 19 February 2015 12:09 PM To: legacy-ornamental-mills@googlegroups.com Subject: Re: Ebay last minute mill Too Good! - Original Message - From: Bill Bulkeley mailto:bulke...@mmnet.com.au To: legacy-ornamental-mills@googlegroups.com Sent: Wednesday, February 18, 2015 5:01 PM Subject: RE: Ebay last minute mill Some one just got a really good deal on that one Bil From: legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Okla Mike (Liltwisted) Sent: Thursday, 19 February 2015 11:21 AM To: legacy group Subject: Re: Ebay last minute mill Legacy Model 1000EXL Mill has X-, Y-, Z axis milling capabilities (X axis is powered); maximum length is 80 Speed Control Box Adjustable Electronic Stops Rotary Table Template Follower .25X Gear Reduction Set 2X Gear Multiplier Set Left Gear Floor stand Included are all instructional videos On 2/18/2015 6:19 PM, Okla Mike (Liltwisted) wrote: http://www.ebay.com/itm/Legacy-Woodworking-Machinery-Model-1000EXL-/291379914451?ssPageName=ADME:B:WNA:US:1120 -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout. No virus found in this message. Checked by AVG - www.avg.com Version: 2015.0.5646 / Virus Database: 4284/9140 - Release Date: 02/18/15 -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the
Re: Ebay last minute mill
http://www.grainger.com/product/DAYTON-DC-Gearmotor-4Z131?nls=1searchQuery=4z131 - Original Message - From: Bill Bulkeley To: legacy-ornamental-mills@googlegroups.com Sent: Thursday, February 19, 2015 12:24 PM Subject: RE: Ebay last minute mill A little weak really can you show me the link to a right size one so i can compare Bill -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout.
RE: Ebay last minute mill
Your right Tim I didn’t notice the torque, 27 in lb up against 13 in lb Once again I bow to your wisdom master yoda. I would have stuffed up and bought one too week Just as well I have masters like you and Mike to check and quickly send the correct motor to me if I buy one. Hint hint (private joke guys) From: legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Tim Krause Sent: Friday, 20 February 2015 7:31 AM To: legacy-ornamental-mills@googlegroups.com Subject: Re: Ebay last minute mill http://www.grainger.com/product/DAYTON-DC-Gearmotor-4Z131?nls=1 http://www.grainger.com/product/DAYTON-DC-Gearmotor-4Z131?nls=1searchQuery=4z131 searchQuery=4z131 - Original Message - From: Bill mailto:bulke...@mmnet.com.au Bulkeley To: legacy-ornamental-mills@googlegroups.com Sent: Thursday, February 19, 2015 12:24 PM Subject: RE: Ebay last minute mill A little weak really can you show me the link to a right size one so i can compare Bill No virus found in this message. Checked by AVG - www.avg.com Version: 2015.0.5646 / Virus Database: 4284/9145 - Release Date: 02/19/15 -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout.
Re: how to mount dewalt 3hp plunge router on legacy 600exl
All these suggestions on how to position the router to attach shows that there is always more than one way to skin a cat than just yanking him on the tail On Tuesday, February 17, 2015 at 1:56:53 AM UTC-6, Dave Chrusciel wrote: i have a legacy 600exl and i know it is designed to use the pc router. i have a new 3hp dewalt with 3 mounting holes. i will probably have to drill some holes to mount the dewalt router, any suggestions on how to mount it so it is centered. does anyone have a legacy ornamental mill with a dewalt plunge router. -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout.
RE: Ebay last minute mill
Practically nothing is available from legacy but motors like this one from ebay can be made to fit http://www.ebay.com/itm/Dayton-Model-1LPW5-DC-Gear-Motor-93-RPM-1-30-hp-90VDC-4Z539-/400597146141?pt=LH_DefaultDomain_0 http://www.ebay.com/itm/Dayton-Model-1LPW5-DC-Gear-Motor-93-RPM-1-30-hp-90VDC-4Z539-/400597146141?pt=LH_DefaultDomain_0hash=item5d45735a1d hash=item5d45735a1d even a controller and most likely limit switches too if you look Bill From: legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Tom Dotta Sent: Friday, 20 February 2015 2:13 AM To: legacy-ornamental-mills@googlegroups.com Subject: Re: Ebay last minute mill Hello All Possibly I could do the same for the drive setup,That one was too far away. Will someone please reference me to the location for the information regarding the parts required and their assembly. I have a 900 as well as an old 6' steel rail #??? mostly unused as the elbow doesn't cotton to the cranking bit. Thanks CheersTom Dotta On Wed, Feb 18, 2015 at 5:24 PM, Bill Bulkeley bulke...@mmnet.com.au wrote: Yea if it keeps going I will be able to buy a whole mill just to get my ball bearing headstock And still not over pay (I’m still looking for one) Bill From: legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Tim Krause Sent: Thursday, 19 February 2015 12:22 PM To: legacy-ornamental-mills@googlegroups.com Subject: Re: Ebay last minute mill No, I have an extra 1000 exl with stand and motor and hate to think how the market is losing it's value. -Tim - Original Message - From: Bill Bulkeley mailto:bulke...@mmnet.com.au To: legacy-ornamental-mills@googlegroups.com Sent: Wednesday, February 18, 2015 5:17 PM Subject: RE: Ebay last minute mill Was it you Tim?? From: legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Tim Krause Sent: Thursday, 19 February 2015 12:09 PM To: legacy-ornamental-mills@googlegroups.com Subject: Re: Ebay last minute mill Too Good! - Original Message - From: Bill Bulkeley mailto:bulke...@mmnet.com.au To: legacy-ornamental-mills@googlegroups.com Sent: Wednesday, February 18, 2015 5:01 PM Subject: RE: Ebay last minute mill Some one just got a really good deal on that one Bil From: legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Okla Mike (Liltwisted) Sent: Thursday, 19 February 2015 11:21 AM To: legacy group Subject: Re: Ebay last minute mill Legacy Model 1000EXL Mill has X-, Y-, Z axis milling capabilities (X axis is powered); maximum length is 80 Speed Control Box Adjustable Electronic Stops Rotary Table Template Follower .25X Gear Reduction Set 2X Gear Multiplier Set Left Gear Floor stand Included are all instructional videos On 2/18/2015 6:19 PM, Okla Mike (Liltwisted) wrote: http://www.ebay.com/itm/Legacy-Woodworking-Machinery-Model-1000EXL-/291379914451?ssPageName=ADME:B:WNA:US:1120 -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout. No virus found in this message. Checked by AVG - www.avg.com Version: 2015.0.5646 / Virus Database: 4284/9140 - Release Date: 02/18/15 -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout. No virus found in this message. Checked by AVG - www.avg.com Version: 2015.0.5646 / Virus Database: 4284/9140 - Release Date: 02/18/15 -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to
Re: Ebay last minute mill
Bill Now you need to find a spell checking yoda so you know the difference between days of the week and strength or is that your weakness! Regards Roger From: Bill Bulkeley Sent: Thursday, February 19, 2015 9:19 PM To: legacy-ornamental-mills@googlegroups.com Subject: RE: Ebay last minute mill Your right Tim I didn’t notice the torque, 27 in lb up against 13 in lb Once again I bow to your wisdom master yoda. I would have stuffed up and bought one too week Just as well I have masters like you and Mike to check and quickly send the correct motor to me if I buy one. Hint hint (private joke guys) From: legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Tim Krause Sent: Friday, 20 February 2015 7:31 AM To: legacy-ornamental-mills@googlegroups.com Subject: Re: Ebay last minute mill http://www.grainger.com/product/DAYTON-DC-Gearmotor-4Z131?nls=1searchQuery=4z131 - Original Message - From: Bill Bulkeley To: legacy-ornamental-mills@googlegroups.com Sent: Thursday, February 19, 2015 12:24 PM Subject: RE: Ebay last minute mill A little weak really can you show me the link to a right size one so i can compare Bill No virus found in this message. Checked by AVG - www.avg.com Version: 2015.0.5646 / Virus Database: 4284/9145 - Release Date: 02/19/15 -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout.
RE: Ebay last minute mill
Oh man it’s my day for being put in my place I’m just too weak this week lolol :-) From: legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Roger P Sent: Friday, 20 February 2015 8:28 AM To: legacy-ornamental-mills@googlegroups.com Subject: Re: Ebay last minute mill Bill Now you need to find a spell checking yoda so you know the difference between days of the week and strength or is that your weakness! Regards Roger From: Bill Bulkeley mailto:bulke...@mmnet.com.au Sent: Thursday, February 19, 2015 9:19 PM To: legacy-ornamental-mills@googlegroups.com Subject: RE: Ebay last minute mill Your right Tim I didn’t notice the torque, 27 in lb up against 13 in lb Once again I bow to your wisdom master yoda. I would have stuffed up and bought one too week Just as well I have masters like you and Mike to check and quickly send the correct motor to me if I buy one. Hint hint (private joke guys) From: legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Tim Krause Sent: Friday, 20 February 2015 7:31 AM To: legacy-ornamental-mills@googlegroups.com Subject: Re: Ebay last minute mill http://www.grainger.com/product/DAYTON-DC-Gearmotor-4Z131?nls=1 http://www.grainger.com/product/DAYTON-DC-Gearmotor-4Z131?nls=1searchQuery=4z131 searchQuery=4z131 - Original Message - From: Bill Bulkeley mailto:bulke...@mmnet.com.au To: legacy-ornamental-mills@googlegroups.com Sent: Thursday, February 19, 2015 12:24 PM Subject: RE: Ebay last minute mill A little weak really can you show me the link to a right size one so i can compare Bill No virus found in this message. Checked by AVG - www.avg.com Version: 2015.0.5646 / Virus Database: 4284/9145 - Release Date: 02/19/15 -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout. No virus found in this message. Checked by AVG - www.avg.com Version: 2015.0.5646 / Virus Database: 4284/9145 - Release Date: 02/19/15 -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout.
Re: how to mount dewalt 3hp plunge router on legacy 600exl
I should post pictures of the 11' x 14' bookshelf soon. Unit installed but I just have to finish the finish on the library ladder and slide on the rail. This darn cold weather makes spraying poly a problem. No heat in the shop (currently). Customer is quite pleased so far. That is what really matters. On Thursday, February 19, 2015 at 4:09:12 PM UTC-6, Curtis wrote: Hay Dexter, Variety is the Spice of Life. There are/is almost always , more then one way to do anything correctly. But learning the different ways can be a lot of fun. Take care AND Good luck on your project.And Please let us know how it turns out. ;-) C.A.G. -- *From: *Dexter Bland dexte...@gmail.com javascript: *To: *legacy-orna...@googlegroups.com javascript: *Sent: *Thursday, February 19, 2015 8:46:43 AM *Subject: *Re: how to mount dewalt 3hp plunge router on legacy 600exl All these suggestions on how to position the router to attach shows that there is always more than one way to skin a cat than just yanking him on the tail On Tuesday, February 17, 2015 at 1:56:53 AM UTC-6, Dave Chrusciel wrote: i have a legacy 600exl and i know it is designed to use the pc router. i have a new 3hp dewalt with 3 mounting holes. i will probably have to drill some holes to mount the dewalt router, any suggestions on how to mount it so it is centered. does anyone have a legacy ornamental mill with a dewalt plunge router. -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com javascript:. To post to this group, send email to legacy-orna...@googlegroups.com javascript:. Visit this group at http://groups.google.com/group/legacy-ornamental-mills . For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout.
RE: Ebay last minute mill
Bill, did you get the motor I sent, I forgot!I have two and don't know if they work. Am transitioning a used 1000 I bought locally to power etc. I have an extra controller as well.It is just so much fun watch you mechanical geniuses do your thing. here's another http://www.ebay.com/itm/161525189965?_trksid=p2060778.m1438.l2649ssPageName=STRK%3AMEBIDX%3AITmax From: bulke...@mmnet.com.au To: legacy-ornamental-mills@googlegroups.com Subject: RE: Ebay last minute mill Date: Fri, 20 Feb 2015 09:19:51 +1100 Oh man it’s my day for being put in my place I’m just too weak this week lolol J From: legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Roger P Sent: Friday, 20 February 2015 8:28 AM To: legacy-ornamental-mills@googlegroups.com Subject: Re: Ebay last minute mill Bill Now you need to find a spell checking yoda so you know the difference between days of the week and strength or is that your weakness! Regards Roger From: Bill Bulkeley Sent: Thursday, February 19, 2015 9:19 PM To: legacy-ornamental-mills@googlegroups.com Subject: RE: Ebay last minute mill Your right Tim I didn’t notice the torque, 27 in lb up against 13 in lb Once again I bow to your wisdom master yoda. I would have stuffed up and bought one too week Just as well I have masters like you and Mike to check and quickly send the correct motor to me if I buy one. Hint hint (private joke guys) From: legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Tim Krause Sent: Friday, 20 February 2015 7:31 AM To: legacy-ornamental-mills@googlegroups.com Subject: Re: Ebay last minute mill http://www.grainger.com/product/DAYTON-DC-Gearmotor-4Z131?nls=1searchQuery=4z131 - Original Message - From: Bill Bulkeley To: legacy-ornamental-mills@googlegroups.com Sent: Thursday, February 19, 2015 12:24 PM Subject: RE: Ebay last minute mill A little weak really can you show me the link to a right size one so i can compare Bill No virus found in this message. Checked by AVG - www.avg.com Version: 2015.0.5646 / Virus Database: 4284/9145 - Release Date: 02/19/15 -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout. No virus found in this message. Checked by AVG - www.avg.com Version: 2015.0.5646 / Virus Database: 4284/9145 - Release Date: 02/19/15 -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout.
Re: Ebay last minute mill
That's an interesting find Bill. It might be a little weak. For reference, Legacy used Dayton/Grainger motor 4Z131. There is several on Ebay at this moment. -Tim - Original Message - From: Bill Bulkeley To: legacy-ornamental-mills@googlegroups.com Sent: Thursday, February 19, 2015 7:53 AM Subject: RE: Ebay last minute mill Practically nothing is available from legacy but motors like this one from ebay can be made to fit http://www.ebay.com/itm/Dayton-Model-1LPW5-DC-Gear-Motor-93-RPM-1-30-hp-90VDC-4Z539-/400597146141?pt=LH_DefaultDomain_0hash=item5d45735a1d even a controller and most likely limit switches too if you look Bill From: legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Tom Dotta Sent: Friday, 20 February 2015 2:13 AM To: legacy-ornamental-mills@googlegroups.com Subject: Re: Ebay last minute mill Hello All Possibly I could do the same for the drive setup,That one was too far away. Will someone please reference me to the location for the information regarding the parts required and their assembly. I have a 900 as well as an old 6' steel rail #??? mostly unused as the elbow doesn't cotton to the cranking bit. Thanks CheersTom Dotta On Wed, Feb 18, 2015 at 5:24 PM, Bill Bulkeley bulke...@mmnet.com.au wrote: Yea if it keeps going I will be able to buy a whole mill just to get my ball bearing headstock And still not over pay (I’m still looking for one) Bill From: legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Tim Krause Sent: Thursday, 19 February 2015 12:22 PM To: legacy-ornamental-mills@googlegroups.com Subject: Re: Ebay last minute mill No, I have an extra 1000 exl with stand and motor and hate to think how the market is losing it's value. -Tim - Original Message - From: Bill Bulkeley To: legacy-ornamental-mills@googlegroups.com Sent: Wednesday, February 18, 2015 5:17 PM Subject: RE: Ebay last minute mill Was it you Tim?? From: legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Tim Krause Sent: Thursday, 19 February 2015 12:09 PM To: legacy-ornamental-mills@googlegroups.com Subject: Re: Ebay last minute mill Too Good! - Original Message - From: Bill Bulkeley To: legacy-ornamental-mills@googlegroups.com Sent: Wednesday, February 18, 2015 5:01 PM Subject: RE: Ebay last minute mill Some one just got a really good deal on that one Bil From: legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Okla Mike (Liltwisted) Sent: Thursday, 19 February 2015 11:21 AM To: legacy group Subject: Re: Ebay last minute mill Legacy Model 1000EXL Mill has X-, Y-, Z axis milling capabilities (X axis is powered); maximum length is 80 Speed Control Box Adjustable Electronic Stops Rotary Table Template Follower .25X Gear Reduction Set 2X Gear Multiplier Set Left Gear Floor stand Included are all instructional videos On 2/18/2015 6:19 PM, Okla Mike (Liltwisted) wrote: http://www.ebay.com/itm/Legacy-Woodworking-Machinery-Model-1000EXL-/291379914451?ssPageName=ADME:B:WNA:US:1120 -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout. No virus found in this message. Checked by AVG - www.avg.com Version: 2015.0.5646 / Virus Database: 4284/9140 - Release Date: 02/18/15 -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to
Re: Ebay last minute mill
Hello All Possibly I could do the same for the drive setup,That one was too far away. Will someone please reference me to the location for the information regarding the parts required and their assembly. I have a 900 as well as an old 6' steel rail #??? mostly unused as the elbow doesn't cotton to the cranking bit. Thanks CheersTom Dotta On Wed, Feb 18, 2015 at 5:24 PM, Bill Bulkeley bulke...@mmnet.com.au wrote: Yea if it keeps going I will be able to buy a whole mill just to get my ball bearing headstock And still not over pay (I’m still looking for one) Bill *From:* legacy-ornamental-mills@googlegroups.com [mailto: legacy-ornamental-mills@googlegroups.com] *On Behalf Of *Tim Krause *Sent:* Thursday, 19 February 2015 12:22 PM *To:* legacy-ornamental-mills@googlegroups.com *Subject:* Re: Ebay last minute mill No, I have an extra 1000 exl with stand and motor and hate to think how the market is losing it's value. -Tim - Original Message - *From:* Bill Bulkeley bulke...@mmnet.com.au *To:* legacy-ornamental-mills@googlegroups.com *Sent:* Wednesday, February 18, 2015 5:17 PM *Subject:* RE: Ebay last minute mill Was it you Tim?? *From:* legacy-ornamental-mills@googlegroups.com [mailto: legacy-ornamental-mills@googlegroups.com] *On Behalf Of *Tim Krause *Sent:* Thursday, 19 February 2015 12:09 PM *To:* legacy-ornamental-mills@googlegroups.com *Subject:* Re: Ebay last minute mill Too Good! - Original Message - *From:* Bill Bulkeley bulke...@mmnet.com.au *To:* legacy-ornamental-mills@googlegroups.com *Sent:* Wednesday, February 18, 2015 5:01 PM *Subject:* RE: Ebay last minute mill Some one just got a really good deal on that one Bil *From:* legacy-ornamental-mills@googlegroups.com [mailto: legacy-ornamental-mills@googlegroups.com] *On Behalf Of *Okla Mike (Liltwisted) *Sent:* Thursday, 19 February 2015 11:21 AM *To:* legacy group *Subject:* Re: Ebay last minute mill Legacy Model 1000EXL Mill has X-, Y-, Z axis milling capabilities (X axis is powered); maximum length is 80 Speed Control Box Adjustable Electronic Stops Rotary Table Template Follower .25X Gear Reduction Set 2X Gear Multiplier Set Left Gear Floor stand Included are all instructional videos On 2/18/2015 6:19 PM, Okla Mike (Liltwisted) wrote: http://www.ebay.com/itm/Legacy-Woodworking-Machinery-Model-1000EXL-/291379914451?ssPageName=ADME:B:WNA:US:1120 -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills . For more options, visit https://groups.google.com/d/optout. No virus found in this message. Checked by AVG - www.avg.com Version: 2015.0.5646 / Virus Database: 4284/9140 - Release Date: 02/18/15 -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills . For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills . For more options, visit https://groups.google.com/d/optout. No virus found in this message. Checked by AVG - www.avg.com Version: 2015.0.5646 / Virus Database: 4284/9140 - Release Date: 02/18/15 -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills . For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this
Re: Ebay last minute mill
NOT bad Max. But the funny thing here is, those pictures have been used before of a Legacy for sale in California a while back. The machine looks nice, and the mobile stand is VERY Nice! C.A.G. - Original Message - From: MAX LATHAM ma...@hotmail.com To: legacy legacy-ornamental-mills@googlegroups.com Sent: Thursday, February 19, 2015 7:44:51 PM Subject: RE: Ebay last minute mill http://www.ebay.com/itm/291380765049?_trksid=p2060778.m1438.l2661ssPageName=STRK%3AMEBIDX%3AIT And the price is right...almost...because no magnate bits!! max From: bulke...@mmnet.com.au To: legacy-ornamental-mills@googlegroups.com Subject: RE: Ebay last minute mill Date: Fri, 20 Feb 2015 09:19:51 +1100 Oh man it’s my day for being put in my place I’m just too weak this week lolol J From: legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Roger P Sent: Friday, 20 February 2015 8:28 AM To: legacy-ornamental-mills@googlegroups.com Subject: Re: Ebay last minute mill Bill Now you need to find a spell checking yoda so you know the difference between days of the week and strength or is that your weakness! Regards Roger From: Bill Bulkeley Sent: Thursday, February 19, 2015 9:19 PM To: legacy-ornamental-mills@googlegroups.com Subject: RE: Ebay last minute mill Your right Tim I didn’t notice the torque, 27 in lb up against 13 in lb Once again I bow to your wisdom master yoda. I would have stuffed up and bought one too week Just as well I have masters like you and Mike to check and quickly send the correct motor to me if I buy one. Hint hint (private joke guys) From: legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Tim Krause Sent: Friday, 20 February 2015 7:31 AM To: legacy-ornamental-mills@googlegroups.com Subject: Re: Ebay last minute mill http://www.grainger.com/product/DAYTON-DC-Gearmotor-4Z131?nls=1searchQuery=4z131 - Original Message - From: Bill Bulkeley To: legacy-ornamental-mills@googlegroups.com Sent: Thursday, February 19, 2015 12:24 PM Subject: RE: Ebay last minute mill A little weak really can you show me the link to a right size one so i can compare Bill No virus found in this message. Checked by AVG - www.avg.com Version: 2015.0.5646 / Virus Database: 4284/9145 - Release Date: 02/19/15 -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com . To post to this group, send email to legacy-ornamental-mills@googlegroups.com . Visit this group at http://groups.google.com/group/legacy-ornamental-mills . For more options, visit https://groups.google.com/d/optout . -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com . To post to this group, send email to legacy-ornamental-mills@googlegroups.com . Visit this group at http://groups.google.com/group/legacy-ornamental-mills . For more options, visit https://groups.google.com/d/optout . No virus found in this message. Checked by AVG - www.avg.com Version: 2015.0.5646 / Virus Database: 4284/9145 - Release Date: 02/19/15 -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com . To post to this group, send email to legacy-ornamental-mills@googlegroups.com . Visit this group at http://groups.google.com/group/legacy-ornamental-mills . For more options, visit https://groups.google.com/d/optout . -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com . To post to this group, send email to legacy-ornamental-mills@googlegroups.com . Visit this group at http://groups.google.com/group/legacy-ornamental-mills . For more options, visit https://groups.google.com/d/optout . -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com . To post to this group, send email to legacy-ornamental-mills@googlegroups.com . Visit this group at http://groups.google.com/group/legacy-ornamental-mills . For more options, visit https://groups.google.com/d/optout . -- You
RE: Ebay last minute mill
Ps i still have another motor coming by very slow mail too i need a second as i have 2 mills Bill From: legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of MAX LATHAM Sent: Friday, 20 February 2015 11:39 AM To: legacy Subject: RE: Ebay last minute mill Bill, did you get the motor I sent, I forgot! I have two and don't know if they work. Am transitioning a used 1000 I bought locally to power etc. I have an extra controller as well. It is just so much fun watch you mechanical geniuses do your thing. here's another http://www.ebay.com/itm/161525189965?_trksid=p2060778.m1438.l2649 http://www.ebay.com/itm/161525189965?_trksid=p2060778.m1438.l2649ssPageName=STRK%3AMEBIDX%3AIT ssPageName=STRK%3AMEBIDX%3AIT max _ From: bulke...@mmnet.com.au To: legacy-ornamental-mills@googlegroups.com Subject: RE: Ebay last minute mill Date: Fri, 20 Feb 2015 09:19:51 +1100 Oh man it’s my day for being put in my place I’m just too weak this week lolol :-) From: legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Roger P Sent: Friday, 20 February 2015 8:28 AM To: legacy-ornamental-mills@googlegroups.com Subject: Re: Ebay last minute mill Bill Now you need to find a spell checking yoda so you know the difference between days of the week and strength or is that your weakness! Regards Roger From: Bill Bulkeley mailto:bulke...@mmnet.com.au Sent: Thursday, February 19, 2015 9:19 PM To: legacy-ornamental-mills@googlegroups.com Subject: RE: Ebay last minute mill Your right Tim I didn’t notice the torque, 27 in lb up against 13 in lb Once again I bow to your wisdom master yoda. I would have stuffed up and bought one too week Just as well I have masters like you and Mike to check and quickly send the correct motor to me if I buy one. Hint hint (private joke guys) From: legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Tim Krause Sent: Friday, 20 February 2015 7:31 AM To: legacy-ornamental-mills@googlegroups.com Subject: Re: Ebay last minute mill http://www.grainger.com/product/DAYTON-DC-Gearmotor-4Z131?nls=1 http://www.grainger.com/product/DAYTON-DC-Gearmotor-4Z131?nls=1searchQuery=4z131 searchQuery=4z131 - Original Message - From: Bill Bulkeley mailto:bulke...@mmnet.com.au To: legacy-ornamental-mills@googlegroups.com Sent: Thursday, February 19, 2015 12:24 PM Subject: RE: Ebay last minute mill A little weak really can you show me the link to a right size one so i can compare Bill No virus found in this message. Checked by AVG - www.avg.com Version: 2015.0.5646 / Virus Database: 4284/9145 - Release Date: 02/19/15 -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout. No virus found in this message. Checked by AVG - www.avg.com Version: 2015.0.5646 / Virus Database: 4284/9145 - Release Date: 02/19/15 -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout. No virus found in this message. Checked by AVG - www.avg.com Version: 2015.0.5646 / Virus Database: 4284/9146 - Release Date: 02/19/15 -- You received this message because you are subscribed to the Google
RE: Ebay last minute mill
Yes i did max thank you very much if your offering I do need a controller never been much interested in limit switches a worked metal cutting machines for over 25 years most of their limit switches never worked so I became quite adapt at stopping in time using a dial indicator anyway limit switches can cause burn marks before you can stop the bit or raise the router. But only not use them if you very experienced don’t want any one crashing their mill out there Bill From: legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of MAX LATHAM Sent: Friday, 20 February 2015 11:39 AM To: legacy Subject: RE: Ebay last minute mill Bill, did you get the motor I sent, I forgot! I have two and don't know if they work. Am transitioning a used 1000 I bought locally to power etc. I have an extra controller as well. It is just so much fun watch you mechanical geniuses do your thing. here's another http://www.ebay.com/itm/161525189965?_trksid=p2060778.m1438.l2649 http://www.ebay.com/itm/161525189965?_trksid=p2060778.m1438.l2649ssPageName=STRK%3AMEBIDX%3AIT ssPageName=STRK%3AMEBIDX%3AIT max _ From: bulke...@mmnet.com.au To: legacy-ornamental-mills@googlegroups.com Subject: RE: Ebay last minute mill Date: Fri, 20 Feb 2015 09:19:51 +1100 Oh man it’s my day for being put in my place I’m just too weak this week lolol :-) From: legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Roger P Sent: Friday, 20 February 2015 8:28 AM To: legacy-ornamental-mills@googlegroups.com Subject: Re: Ebay last minute mill Bill Now you need to find a spell checking yoda so you know the difference between days of the week and strength or is that your weakness! Regards Roger From: Bill Bulkeley mailto:bulke...@mmnet.com.au Sent: Thursday, February 19, 2015 9:19 PM To: legacy-ornamental-mills@googlegroups.com Subject: RE: Ebay last minute mill Your right Tim I didn’t notice the torque, 27 in lb up against 13 in lb Once again I bow to your wisdom master yoda. I would have stuffed up and bought one too week Just as well I have masters like you and Mike to check and quickly send the correct motor to me if I buy one. Hint hint (private joke guys) From: legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Tim Krause Sent: Friday, 20 February 2015 7:31 AM To: legacy-ornamental-mills@googlegroups.com Subject: Re: Ebay last minute mill http://www.grainger.com/product/DAYTON-DC-Gearmotor-4Z131?nls=1 http://www.grainger.com/product/DAYTON-DC-Gearmotor-4Z131?nls=1searchQuery=4z131 searchQuery=4z131 - Original Message - From: Bill Bulkeley mailto:bulke...@mmnet.com.au To: legacy-ornamental-mills@googlegroups.com Sent: Thursday, February 19, 2015 12:24 PM Subject: RE: Ebay last minute mill A little weak really can you show me the link to a right size one so i can compare Bill No virus found in this message. Checked by AVG - www.avg.com Version: 2015.0.5646 / Virus Database: 4284/9145 - Release Date: 02/19/15 -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout. No virus found in this message. Checked by AVG - www.avg.com Version: 2015.0.5646 / Virus Database: 4284/9145 - Release Date: 02/19/15 -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to
RE: Ebay last minute mill
http://www.ebay.com/itm/291380765049?_trksid=p2060778.m1438.l2661ssPageName=STRK%3AMEBIDX%3AIT And the price is right...almost...because no magnate bits!!max From: bulke...@mmnet.com.au To: legacy-ornamental-mills@googlegroups.com Subject: RE: Ebay last minute mill Date: Fri, 20 Feb 2015 09:19:51 +1100 Oh man it’s my day for being put in my place I’m just too weak this week lolol J From: legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Roger P Sent: Friday, 20 February 2015 8:28 AM To: legacy-ornamental-mills@googlegroups.com Subject: Re: Ebay last minute mill Bill Now you need to find a spell checking yoda so you know the difference between days of the week and strength or is that your weakness! Regards Roger From: Bill Bulkeley Sent: Thursday, February 19, 2015 9:19 PM To: legacy-ornamental-mills@googlegroups.com Subject: RE: Ebay last minute mill Your right Tim I didn’t notice the torque, 27 in lb up against 13 in lb Once again I bow to your wisdom master yoda. I would have stuffed up and bought one too week Just as well I have masters like you and Mike to check and quickly send the correct motor to me if I buy one. Hint hint (private joke guys) From: legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Tim Krause Sent: Friday, 20 February 2015 7:31 AM To: legacy-ornamental-mills@googlegroups.com Subject: Re: Ebay last minute mill http://www.grainger.com/product/DAYTON-DC-Gearmotor-4Z131?nls=1searchQuery=4z131 - Original Message - From: Bill Bulkeley To: legacy-ornamental-mills@googlegroups.com Sent: Thursday, February 19, 2015 12:24 PM Subject: RE: Ebay last minute mill A little weak really can you show me the link to a right size one so i can compare Bill No virus found in this message. Checked by AVG - www.avg.com Version: 2015.0.5646 / Virus Database: 4284/9145 - Release Date: 02/19/15 -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout. No virus found in this message. Checked by AVG - www.avg.com Version: 2015.0.5646 / Virus Database: 4284/9145 - Release Date: 02/19/15 -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout.