Re: New Members and Moderation

2018-01-21 Thread Okla Mike (Liltwisted) 

Welcome aboard Ira

What part of the world are you from?  As a furniture builder, you are 
going to love all the things you will be able to offer your clientele 
that your competitors, or even you now, just couldn't offer.  Have a 
good read of all the posts thus far and write down questions.  Further 
reading may answer those questions but you may come up with some good 
ones for the group.   play with some scrap wood, the learning curve 
isn't as steep as you may think.  It sounds like you already have the 
most important part accomplished.  You are a craftsman willing to learn.


Mike OK


On 1/21/2018 3:51 PM, Ira S. Vest wrote:
Hi I'm Ira.I have been doing woodwork for going on 15 years now.  I 
have been considering buying a Legacy Mill. I'm not real good with 
computers so not really thinking a cnc is for me. The Legacy 1200 is 
what I'm really looking for but so far have only found a 900 for sale. 
It is however missing a few parts. It's missing a hand wheel, and 
slides that go in the rails. I have never been around or even seen one 
of the mills in person only on the computer and youtube. I can get the 
900 for a really good deal. I figure this will get my feet wet so to 
speak then in the future maybe find a 1200 to buy. Any info or 
warnings would be greatly appreciated considering my ignorance with 
these machines. I mainly build furniture and cabinets but would like 
to also have the option to go with columns if I decide to. Thanks for 
any and all help.                Ira S. Vest


On Saturday, March 31, 2012 at 8:07:09 PM UTC-4, Tim wrote:

Hello New Members,
This is a reminder that until you post a message, your messages
must be approved by either an owner or moderators of this group to
be posted.  Google sends an automated message to the people that
are responsible for approving messages, but please be aware it can
be a very long delay.
Getting off the moderated list is easy as posting a message
introducing yourself.  Asking a question related to the equipment
or posting a photo is always good for getting instant approval.  I
still believe this is a family friendly place so please don't be shy.
As of today, there are 63 members that have joined since 2010 that
have never posted a message.  I sure would like to hear from them
either here in this thread, or feel free to send me a note off the
list so I can update your status.
-Tim

--
You received this message because you are subscribed to the Google 
Groups "Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send 
an email to legacy-ornamental-mills+unsubscr...@googlegroups.com 
.
To post to this group, send email to 
legacy-ornamental-mills@googlegroups.com 
.
Visit this group at 
https://groups.google.com/group/legacy-ornamental-mills.

For more options, visit https://groups.google.com/d/optout.


--
You received this message because you are subscribed to the Google Groups "Legacy 
Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

RE: New Members and Moderation

2018-01-21 Thread Bill Bulkeley 
You saw this 1200 for sale right?

https://www.ebay.com/itm/Legacy-1200-Woodworking-Ornamental-Mill-with-Router/152843483615?hash=item23962e79df:g:JRgAAOSwSRpZsbaF

 

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
[mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Ira S. Vest
Sent: Monday, 22 January 2018 8:51 AM
To: Legacy Ornamental Mills
Subject: Re: New Members and Moderation

 

Hi I'm Ira.I have been doing woodwork for going on 15 years now.  I have been 
considering buying a Legacy Mill. I'm not real good with computers so not 
really thinking a cnc is for me. The Legacy 1200 is what I'm really looking for 
but so far have only found a 900 for sale. It is however missing a few parts. 
It's missing a hand wheel, and slides that go in the rails. I have never been 
around or even seen one of the mills in person only on the computer and 
youtube. I can get the 900 for a really good deal. I figure this will get my 
feet wet so to speak then in the future maybe find a 1200 to buy. Any info or 
warnings would be greatly appreciated considering my ignorance with these 
machines. I mainly build furniture and cabinets but would like to also have the 
option to go with columns if I decide to. Thanks for any and all help.  

   Ira S. Vest

On Saturday, March 31, 2012 at 8:07:09 PM UTC-4, Tim wrote:

Hello New Members, 

 

This is a reminder that until you post a message, your messages must be 
approved by either an owner or moderators of this group to be posted.  Google 
sends an automated message to the people that are responsible for approving 
messages, but please be aware it can be a very long delay.   

 

Getting off the moderated list is easy as posting a message introducing 
yourself.  Asking a question related to the equipment or posting a photo is 
always good for getting instant approval.  I still believe this is a family 
friendly place so please don't be shy.  

 

As of today, there are 63 members that have joined since 2010 that have never 
posted a message.  I sure would like to hear from them either here in this 
thread, or feel free to send me a note off the list so I can update your 
status.  

 

-Tim

 

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

 


 

 

Virus-free.  

 www.avg.com 

 

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

RE: New Members and Moderation

2018-01-21 Thread Bill Bulkeley 
Welcome to the group Ira here is a link to the ornamental mill user manual it 
will help you identify what bits you need for the mill your looking at and also 
any others that may be missing too.

https://www.dropbox.com/home/Public you will also find some interesting stuff 
here too 

about the ornamental mills  
http://www.ornamentalmills.com/turningaround/index.html

 

 

Bill

 

 

 

 

From: legacy-ornamental-mills@googlegroups.com 
[mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Ira S. Vest
Sent: Monday, 22 January 2018 8:51 AM
To: Legacy Ornamental Mills
Subject: Re: New Members and Moderation

 

Hi I'm Ira.I have been doing woodwork for going on 15 years now.  I have been 
considering buying a Legacy Mill. I'm not real good with computers so not 
really thinking a cnc is for me. The Legacy 1200 is what I'm really looking for 
but so far have only found a 900 for sale. It is however missing a few parts. 
It's missing a hand wheel, and slides that go in the rails. I have never been 
around or even seen one of the mills in person only on the computer and 
youtube. I can get the 900 for a really good deal. I figure this will get my 
feet wet so to speak then in the future maybe find a 1200 to buy. Any info or 
warnings would be greatly appreciated considering my ignorance with these 
machines. I mainly build furniture and cabinets but would like to also have the 
option to go with columns if I decide to. Thanks for any and all help.  

   Ira S. Vest

On Saturday, March 31, 2012 at 8:07:09 PM UTC-4, Tim wrote:

Hello New Members, 

 

This is a reminder that until you post a message, your messages must be 
approved by either an owner or moderators of this group to be posted.  Google 
sends an automated message to the people that are responsible for approving 
messages, but please be aware it can be a very long delay.   

 

Getting off the moderated list is easy as posting a message introducing 
yourself.  Asking a question related to the equipment or posting a photo is 
always good for getting instant approval.  I still believe this is a family 
friendly place so please don't be shy.  

 

As of today, there are 63 members that have joined since 2010 that have never 
posted a message.  I sure would like to hear from them either here in this 
thread, or feel free to send me a note off the list so I can update your 
status.  

 

-Tim

 

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

 


 

 

Virus-free.  

 www.avg.com 

 

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

Re: New Members and Moderation

2018-01-21 Thread Ira S. Vest 
Hi I'm Ira.I have been doing woodwork for going on 15 years now.  I have 
been considering buying a Legacy Mill. I'm not real good with computers so 
not really thinking a cnc is for me. The Legacy 1200 is what I'm really 
looking for but so far have only found a 900 for sale. It is however 
missing a few parts. It's missing a hand wheel, and slides that go in the 
rails. I have never been around or even seen one of the mills in person 
only on the computer and youtube. I can get the 900 for a really good deal. 
I figure this will get my feet wet so to speak then in the future maybe 
find a 1200 to buy. Any info or warnings would be greatly appreciated 
considering my ignorance with these machines. I mainly build furniture and 
cabinets but would like to also have the option to go with columns if I 
decide to. Thanks for any and all help.
 Ira S. 
Vest

On Saturday, March 31, 2012 at 8:07:09 PM UTC-4, Tim wrote:
>
> Hello New Members, 
>  
> This is a reminder that until you post a message, your messages must be 
> approved by either an owner or moderators of this group to be 
> posted.  Google sends an automated message to the people that 
> are responsible for approving messages, but please be aware it can be a 
> very long delay.   
>  
> Getting off the moderated list is easy as posting a message introducing 
> yourself.  Asking a question related to the equipment or posting a photo is 
> always good for getting instant approval.  I still believe this is a family 
> friendly place so please don't be shy.  
>  
> As of today, there are 63 members that have joined since 2010 that have 
> never posted a message.  I sure would like to hear from them either here in 
> this thread, or feel free to send me a note off the list so I can update 
> your status.  
>  
> -Tim
>  
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

Re: New member

2018-01-21 Thread MWF 
Curt,He does not tell us where he is located.There might be a Mill closer to him than California - depending upon his location.I know there are one or two in the Northern Virginia/Maryland/Pennsylvania area.Mac-Original Message-
From: 'Curt George' via Legacy Ornamental Mills 
Sent: Jan 21, 2018 10:50 AM
To: Legacy-Ornamental-Mills 
Subject: New member

  On Sunday, January 21, 2018 8:17 AM, Legacy Ornamental Mills  wrote:   Legacy Ornamental MillsGoogle GroupsIra S. Vest (istse...@gmail.com) has asked to join the Legacy Ornamental Mills group.Message from Ira S. VestHi I'm a woodworker that is just now trying to get into a Legacy 900 ornamental mill. I have never used one or even been around one. I'm not real computer savy so not wanting to go with a cnc lathe. The Legacy seems to be the route for me. I'm needing all the info I can get on this mill and how to use it properly. I'm currently looking to buy a mill and have found one in California . It is however missing a few parts and I will be needing training dvd's. This group seems to be the place to get good information and knowledge of the mill. Thanks Ira S. VestManage membersStart a new group. Visit the help center. 






-- 
You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

New member

2018-01-21 Thread 'Curt George' via Legacy Ornamental Mills 


 On Sunday, January 21, 2018 8:17 AM, Legacy Ornamental Mills 
 wrote:
 

 
| Legacy Ornamental Mills | Google Groups |  |

Ira S. Vest (istse...@gmail.com) has asked to join the Legacy Ornamental Mills 
group.Message from Ira S. VestHi I'm a woodworker that is just now trying to 
get into a Legacy 900 ornamental mill. I have never used one or even been 
around one. I'm not real computer savy so not wanting to go with a cnc lathe. 
The Legacy seems to be the route for me. I'm needing all the info I can get on 
this mill and how to use it properly. I'm currently looking to buy a mill and 
have found one in California . It is however missing a few parts and I will be 
needing training dvd's. This group seems to be the place to get good 
information and knowledge of the mill. Thanks Ira S. VestManage members
| Start a new group. Visit the help center. |



   

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.