Re: TK Reciprocater long curves

['Curt George' via Legacy Ornamental Mills]

 RichardI like it,  I hope you are able to repeat the process again? that is a 
neat cut!
C.A.G.
On Thursday, August 22, 2019, 07:15:38 AM EDT, Richard Ellis 
 wrote:  
 
 Well Tim you are rightWhat I did was to keep my finger in place on the pin of 
the TK   ( pressing gently in one direction )The cut was done, by putting the 
pin in the next hole to where it should have been.. I:E I made it make a 
mistake like I did. All trial and error on my part. The question is ---shall I 
be able to do it again ??Richard

On Thursday, August 22, 2019 at 11:44:06 AM UTC+1, Tim wrote:
That's something I have not seen.  You might want to add a light return spring 
to prevent any loss of time issues in the extended sine wave. 


Sent from Samsung tablet
 Original message From: Richard Ellis  
Date: 8/22/19 3:16 AM (GMT-08:00) To: Legacy Ornamental Mills  Subject: Re: TK Reciprocater long curves 
Tim & othersHere are a couple of pics of the same bit of wood.Richard

On Thursday, August 22, 2019 at 8:33:28 AM UTC+1, Richard Ellis wrote:
Thanks for the info Curt & Bill I have printed it of to study and then it will 
go into my folder for other s who end up with my RevoRichard

On Sunday, August 18, 2019 at 10:46:40 AM UTC+1, Richard Ellis wrote:
Hi all you LOM expertsI am trying to do a long (approx ) 6 inch flute with the 
TK at present with the standard index gear I get a 2 inch point to point curve 
If I change to the 2X gear I think it will only give me a four inch point to 
point  --- I have not tried but it's my guess !!Am I trying to do the 
impossible???Richard



-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+ unsubscr...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/ 
msgid/legacy-ornamental-mills/ 58a54418-8c91-4041-841b- 
92cf15c106f1%40googlegroups. com.



-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/0a70efeb-04b4-4766-b093-91238c058645%40googlegroups.com.
  

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/1726364233.509162.1566476716339%40mail.yahoo.com.

RE: TK Reciprocater long curves

[bulkeley]

I really like that pattern Richard well done I haven’t seen that one either

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of Richard Ellis
Sent: Thursday, 22 August 2019 8:16 PM
To: Legacy Ornamental Mills 
Subject: Re: TK Reciprocater long curves

 

Tim & others

Here are a couple of pics of the same bit of wood.

Richard

On Thursday, August 22, 2019 at 8:33:28 AM UTC+1, Richard Ellis wrote:

Thanks for the info Curt & Bill

 I have printed it of to study and then it will go into my folder for other s 
who end up with my Revo

Richard

On Sunday, August 18, 2019 at 10:46:40 AM UTC+1, Richard Ellis wrote:

Hi all you LOM experts

I am trying to do a long (approx ) 6 inch flute with the TK at present with the 
standard index gear I get a 2 inch point to point curve 

If I change to the 2X gear I think it will only give me a four inch point to 
point  --- I have not tried but it's my guess !!

Am I trying to do the impossible???

Richard

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
 .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/58a54418-8c91-4041-841b-92cf15c106f1%40googlegroups.com
 

 .



---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/001001d558dc%24ecff6e70%24c6fe4b50%24%40mmnet.com.au.

Re: TK Reciprocater long curves

[Richard Ellis]

Well Tim you are right
What I did was to keep my finger in place on the pin of the TK   ( pressing 
gently in one direction )The cut was done, by putting the pin in the next 
hole to where it should have been.. I:E I made it make a mistake like I 
did. All trial and error on my part. 
The question is ---shall I be able to do it again ??
Richard

On Thursday, August 22, 2019 at 11:44:06 AM UTC+1, Tim wrote:
>
> That's something I have not seen.  You might want to add a light return 
> spring to prevent any loss of time issues in the extended sine wave. 
>
>
>
> Sent from Samsung tablet
>
>  Original message 
> From: Richard Ellis > 
> Date: 8/22/19 3:16 AM (GMT-08:00) 
> To: Legacy Ornamental Mills > 
>
> Subject: Re: TK Reciprocater long curves 
>
> Tim & others
> Here are a couple of pics of the same bit of wood.
> Richard
>
> On Thursday, August 22, 2019 at 8:33:28 AM UTC+1, Richard Ellis wrote:
>>
>> Thanks for the info Curt & Bill
>>  I have printed it of to study and then it will go into my folder for 
>> other s who end up with my Revo
>> Richard
>>
>> On Sunday, August 18, 2019 at 10:46:40 AM UTC+1, Richard Ellis wrote:
>>>
>>> Hi all you LOM experts
>>> I am trying to do a long (approx ) 6 inch flute with the TK at present 
>>> with the standard index gear I get a 2 inch point to point curve 
>>> If I change to the 2X gear I think it will only give me a four inch 
>>> point to point  --- I have not tried but it's my guess !!
>>> Am I trying to do the impossible???
>>> Richard
>>>
>> -- 
> You received this message because you are subscribed to the Google Groups 
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an 
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com 
> .
> To view this discussion on the web visit 
> https://groups.google.com/d/msgid/legacy-ornamental-mills/58a54418-8c91-4041-841b-92cf15c106f1%40googlegroups.com
>  
> 
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/0a70efeb-04b4-4766-b093-91238c058645%40googlegroups.com.

Re: TK Reciprocater long curves

[artmarbles]

That's something I have not seen.  You might want to add a light return spring 
to prevent any loss of time issues in the extended sine wave. Sent from Samsung 
tablet
 Original message From: Richard Ellis  
Date: 8/22/19  3:16 AM  (GMT-08:00) To: Legacy Ornamental Mills 
 Subject: Re: TK Reciprocater long 
curves Tim & othersHere are a couple of pics of the same bit of wood.RichardOn 
Thursday, August 22, 2019 at 8:33:28 AM UTC+1, Richard Ellis wrote:Thanks for 
the info Curt & Bill I have printed it of to study and then it will go into my 
folder for other s who end up with my RevoRichardOn Sunday, August 18, 2019 at 
10:46:40 AM UTC+1, Richard Ellis wrote:Hi all you LOM expertsI am trying to do 
a long (approx ) 6 inch flute with the TK at present with the standard index 
gear I get a 2 inch point to point curve If I change to the 2X gear I think it 
will only give me a four inch point to point  --- I have not tried but it's my 
guess !!Am I trying to do the impossible???Richard



-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/58a54418-8c91-4041-841b-92cf15c106f1%40googlegroups.com.

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/5d5e71f5.1c69fb81.b4a2d.7e36SMTPIN_ADDED_MISSING%40gmr-mx.google.com.

Re: TK Reciprocater long curves

[Richard Ellis]

Thanks for the info Curt & Bill
 I have printed it of to study and then it will go into my folder for other 
s who end up with my Revo
Richard

On Sunday, August 18, 2019 at 10:46:40 AM UTC+1, Richard Ellis wrote:
>
> Hi all you LOM experts
> I am trying to do a long (approx ) 6 inch flute with the TK at present 
> with the standard index gear I get a 2 inch point to point curve 
> If I change to the 2X gear I think it will only give me a four inch point 
> to point  --- I have not tried but it's my guess !!
> Am I trying to do the impossible???
> Richard
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/72a84a92-4608-4112-9b94-66ac47c7dd68%40googlegroups.com.