Re: mill for sale

['Curt George' via Legacy Ornamental Mills]

 OK Mac.I did not see that.  I was hoping it was there? after-all nothing would 
work without it... ;-) Now we need to look for the Acme nut for the carriage. 
;-p
As I said earlier,From the posting, the man says he had to cut photo's out to 
make room in the E-bay posting.  In Good faith, this looks to be a nice machine.
Have a good night.
C.A.G.
On Sunday, September 8, 2019, 12:35:47 AM EDT, MWF  
wrote:  
 
 Curtis,
Go to the next to the last photo - the one with the 2 good sized pieces of MDF 
with bolts & wingnuts in them.  Then look over on the far left side, running 
parallel with the left edge of the MDF panels.  See the long Acme threaded 
X-Axis rod?  The Acme rod (Y-Axis) I referenced earlier (in a different thread 
about this Mill) as being rusty is rustier that this X-Axis rod.  
Any idea what these two MDF pieces are for?  My guess is they were to be put 
horizontally between the two lower frame extrusions - serving as a work surface 
for milling flat work pieces.
Mac

-Original Message-
From: 'Curt George' via Legacy Ornamental Mills 
Sent: Sep 7, 2019 3:56 PM
To: Legacy Ornamental Mills 
Subject: Re: mill for sale

 Hey guys one more NOTE.On closer look, I do not see a acme screw in the 
photos.  I hope this is just a mistake? the owner stated like new, and limit on 
photos. perhaps it is just not on the unit when the photo was taken? (photo #3.)
C.A.G.On Saturday, September 7, 2019, 03:47:29 PM EDT, Curt George 
 wrote:  
  Thanks BillI missed this one. Not a bad price if it stays where it is at?
some good points are this is an older 1000ex. it has a #2MT. on both the head 
and tail-stock, so it can take  lathe adapters, like a drive spur and or live 
center I find this useful, On my Legacy. 
C.A.G.On Saturday, September 7, 2019, 03:27:12 AM EDT, 
bulke...@mmnet.com.au  wrote:  
 
 #yiv5587322005 -- filtered {panose-1:2 4 5 3 5 4 6 3 2 4;}#yiv5587322005 
filtered {font-family:Calibri;panose-1:2 15 5 2 2 2 4 3 2 4;}#yiv5587322005 
p.yiv5587322005MsoNormal, #yiv5587322005 li.yiv5587322005MsoNormal, 
#yiv5587322005 div.yiv5587322005MsoNormal 
{margin:0cm;margin-bottom:.0001pt;font-size:11.0pt;font-family:sans-serif;}#yiv5587322005
 a:link, #yiv5587322005 span.yiv5587322005MsoHyperlink 
{color:#0563C1;text-decoration:underline;}#yiv5587322005 a:visited, 
#yiv5587322005 span.yiv5587322005MsoHyperlinkFollowed 
{color:#954F72;text-decoration:underline;}#yiv5587322005 
span.yiv5587322005EmailStyle17 
{font-family:sans-serif;color:windowtext;}#yiv5587322005 
.yiv5587322005MsoChpDefault {font-family:sans-serif;}#yiv5587322005 filtered 
{margin:72.0pt 72.0pt 72.0pt 72.0pt;}#yiv5587322005 
div.yiv5587322005WordSection1 {}#yiv5587322005 
Has every one seen this one for sale  
https://www.ebay.com/itm/Wood-Work-Legacy-Ornamental-Wood-Working-Machine-With-Router-Porter-Cable/303267408835?hash=item469c256bc3:g:~NEAAOSwTLpdUvlK

  

  

Bill


| 
 | 
 |


 

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/2057240623.6548.1567917345021%40wamui-berry.atl.sa.earthlink.net.
  

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/610777529.2601914.1567918240919%40mail.yahoo.com.

Conroe, Texas Mill on eBay

[MWF]

Curtis,You switched Mills on us.  I'm changing the Subject line to:  "Conroe, Texas Mill on eBay".   (The one you commented on earlier in this thread was in Florida.)I looked this eBay posting over - and I feel it is a legit listing.  Yes, they don't show the actual Mill - but their write-up "Talks the talk", and he does post photos of Legacy accessories like the "Swan neck" steel templates, Design Kit, many of the Legacy pubs/magazines, etc.And, by the way, did an EXCELLENT JOB neatly organizing/arranging the items in the photo that has the Pilaster Mounting Dogs, 6 of the 7 Drive Gears (7th is probably on the Mill), the 5 router bits they mention, etc.   We could only wish Everyone selling stuff on eBay, CraigsList, etc. would do as good a job as this person did on most all of the photos they posted.  I do notice that in the 1st photo they have blacked out the price that was originally printed in that "starburst" in the bottom right corner.  Anyone know what that $number was that is blacked out?I also feel that the prices he said he paid track with the numbers I remember them being.  One item that is conspicuously "absent" is any mention of the Rotary Table.  I would have expected a Mill that seems to be as "tricked out" as this one is to have a Rotary Table.  They seem to have everything else!Thanks for sharing.Mac-Original Message-
From: 'Curt George' via Legacy Ornamental Mills 
Sent: Sep 7, 2019 4:02 PM
To: 'Curt George' via Legacy Ornamental Mills 
Subject: Re: mill for sale


This E-bay sale looks Fishy to me.  Lots of stuff,but No pictures of 1200??? only advertisements from catalog.C.A.G.Legacy Ornamental mill machines!!! Model 1200  | eBay$1895.00Legacy Ornamental mill machines!!! Model 1200  | eBayUnit creates various wood moldings such as spindles, spirals, and fluted rope moldings. Many other molding profi...





On Saturday, September 7, 2019, 03:56:44 PM EDT, 'Curt George' via Legacy Ornamental Mills  wrote:




Hey guys one more NOTE.On closer look, I do not see a acme screw in the photos.  I hope this is just a mistake? the owner stated like new, and limit on photos. perhaps it is just not on the unit when the photo was taken? (photo #3.)C.A.G.





On Saturday, September 7, 2019, 03:47:29 PM EDT, Curt George  wrote:




Thanks BillI missed this one. Not a bad price if it stays where it is at?some good points are this is an older 1000ex. it has a #2MT. on both the head and tail-stock, so it can take  lathe adapters, like a drive spur and or live center I find this useful, On my Legacy. C.A.G.





On Saturday, September 7, 2019, 03:27:12 AM EDT, bulke...@mmnet.com.au  wrote:



Has every one seen this one for sale  https://www.ebay.com/itm/Wood-Work-Legacy-Ornamental-Wood-Working-Machine-With-Router-Porter-Cable/303267408835?hash=item469c256bc3:g:~NEAAOSwTLpdUvlK    Bill





-- 
You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/514390785.6520.1567915857687%40wamui-berry.atl.sa.earthlink.net.

RE: One more Wild Legacy E-bay action.

[bulkeley]

Please let us know if you start selling parts I have enough mills but always 
looking for parts

Bill

-Original Message-
From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of Matt Frederick
Sent: Sunday, 8 September 2019 8:08 AM
To: Legacy Ornamental Mills 
Subject: One more Wild Legacy E-bay action.

They are mine, I can separate them. I been working with with Joe on getting 
three complete machines and then extra parts catogorized. 

There is a ton of stuff here, ideally I could sell the lot. 

Thanks 

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/cee13592-db9d-40cb-8d7d-05844a0609d8%40googlegroups.com.


---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/000501d565f7%2430f04d80%2492d0e880%24%40mmnet.com.au.

Re: legacy design kit

[Paul Richmond]

There is a video on the design kit located in the Videos directory of the 
following link;

https://drive.google.com/drive/folders/122Gx6u5a9GiXFQBPtbKwOdJ6f_kVnw3t?usp=sharing

Not the greatest quality but better than nothing.

Paul

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/273c25b5-f37b-4b18-a892-a28de27d87bf%40googlegroups.com.

Old, Old Legacy Ornamental Mill Videos.

[Paul Richmond]

I have uploaded four old Legacy Mill related videos to the shared document 
site.  They ain't great but if you are desperate, they may help.  The 
following is a sharable link to the parent directory.  You will find them 
in the Videos folder.

https://drive.google.com/drive/folders/122Gx6u5a9GiXFQBPtbKwOdJ6f_kVnw3t?usp=sharing

Feel free to share this link with others who may be interested.

Best regards all.
,

Paul


-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/58dfd578-d9a4-4f85-a222-8e9db2b99f20%40googlegroups.com.

Re: One more Wild Legacy E-bay action.

[Tim Ziegler]

Yup for sure drive motors and controls, thin stock followers, thin stock
support etc... vertical bench vise?
I could use any of these.


Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Sat, Sep 7, 2019 at 7:17 PM 'Curt George' via Legacy Ornamental Mills <
legacy-ornamental-mills@googlegroups.com> wrote:

> Wow Matt
> I am having some serious tool envy at this time...
>
> You have a LOT there!
>
> Have you thought of indexing what you have, to make sure each machine has
> what it needs, and then parting out the rest. instead of selling the hole
> thing as a lot...?
> I know a few people (in our group) who may wants some of what you have.
>
> I wish you luck.
>
> C.A.G.
>
> On Saturday, September 7, 2019, 06:08:28 PM EDT, Matt Frederick <
> mfred2...@gmail.com> wrote:
>
>
> They are mine, I can separate them. I been working with with Joe on
> getting three complete machines and then extra parts catogorized.
>
> There is a ton of stuff here, ideally I could sell the lot.
>
> Thanks
>
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
>
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/cee13592-db9d-40cb-8d7d-05844a0609d8%40googlegroups.com
> .
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/912962209.2573293.1567901852149%40mail.yahoo.com
> 
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLHN96rr6sjX8GGPOrFuhNCa_FsVB_vcuPkaN6UDZXB2Aw%40mail.gmail.com.

Re: One more Wild Legacy E-bay action.

['Curt George' via Legacy Ornamental Mills]

 One more thing Matt.I see a head and tail stock form a Wood chuck, at least 2 
old steely 5 or 600's . Plastic gears for those steely's Plus that are clearly 
not part of those Legacy's on the cover page.
There are even a few parts that I am looking for  a old machine I am 
re-building, my self.
there is a LOT of stuff there.Lots of Eye Candy.
thank you.
C.A.G.
On Saturday, September 7, 2019, 08:17:37 PM EDT, 'Curt George' via Legacy 
Ornamental Mills  wrote:  
 
  Wow MattI am having some serious tool envy at this time...
You have a LOT there!
Have you thought of indexing what you have, to make sure each machine has what 
it needs, and then parting out the rest. instead of selling the hole thing as a 
lot...?I know a few people (in our group) who may wants some of what you have.
I wish you luck.
C.A.G.
On Saturday, September 7, 2019, 06:08:28 PM EDT, Matt Frederick 
 wrote:  
 
 They are mine, I can separate them. I been working with with Joe on getting 
three complete machines and then extra parts catogorized. 

There is a ton of stuff here, ideally I could sell the lot. 

Thanks 

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/cee13592-db9d-40cb-8d7d-05844a0609d8%40googlegroups.com.
  

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/912962209.2573293.1567901852149%40mail.yahoo.com.
  

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/931032302.2567833.1567902479012%40mail.yahoo.com.

One more Wild Legacy E-bay action.

[Matt Frederick]

They are mine, I can separate them. I been working with with Joe on getting 
three complete machines and then extra parts catogorized. 

There is a ton of stuff here, ideally I could sell the lot. 

Thanks 

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/cee13592-db9d-40cb-8d7d-05844a0609d8%40googlegroups.com.

RE: One more Wild Legacy E-bay action.

[IAN]

I can’t see any stepper motors anywhere, I think they’re just X power feed 
motors

Sent from Mail for Windows 10

From: 'Curt George' via Legacy Ornamental Mills
Sent: Saturday, September 7, 2019 4:07 PM
To: Legacy Ornamental Mills
Subject: One more Wild Legacy E-bay action.

https://www.ebay.com/itm/3-Legacy-CNC-Ornamental-wood-working-mill-machines-Model-1500-Lot-Duplicator/202744060327?hash=item2f347cd9a7:g:yyUAAOSwFQFdPNCC
3 Legacy CNC Ornamental wood working machines!!! Lot. Condition is Used. I 
believe they are model 1500

I’m not sure what these machines are or how they work. Bought at surplus 
auction. Seller said they were bought new and rarely used.


Shop with confidence
eBay Money Back Guarantee
Get the item you ordered or get your money back. Learn more- opens in new 
window or tab
Seller information
mfred_2000 (987 )
100% Positive feedback

 Save this Seller
Contact seller
See other items
3 Legacy CNC Ornamental wood working mill machines!!! Model 1500 Lot Duplicator
Condition:
Used
Price:
US $10,000.00
$446 for 24 months *
Buy It Now-
 
 
Add to cart-
Best Offer:
 
Make Offer-
 
 
 Add to watchlist
Longtime member
No returns
13 watchers
Shipping:
Free Local Pickup | See details
 
Item location:
Mattoon, Illinois, United States
 
Ships to:
Local pick-up only
Delivery:
Varies
Payments:


*$446 for 24 months. Minimum purchase required.  Apply Now  |  See terms
Returns:
Seller does not accept returns |  See details

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/999121399.2519770.1567886878116%40mail.yahoo.com.

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/5d7418d4.1c69fb81.5a307.84e5SMTPIN_ADDED_MISSING%40gmr-mx.google.com.

One more Wild Legacy E-bay action.

['Curt George' via Legacy Ornamental Mills]

https://www.ebay.com/itm/3-Legacy-CNC-Ornamental-wood-working-mill-machines-Model-1500-Lot-Duplicator/202744060327?hash=item2f347cd9a7:g:yyUAAOSwFQFdPNCC

| 
3 Legacy CNC Ornamental wood working machines!!! Lot. Condition is Used. I 
believe they are model 1500


I’m not sure what these machines are or how they work. Bought at surplus 
auction. Seller said they were bought new and rarely used.
 |



Shop with confidenceeBay Money Back GuaranteeGet the item you ordered or get 
your money back. Learn more- opens in new window or tab
Seller information
mfred_2000 (987 )100% Positive feedback Save this SellerContact sellerSee other 
items
3 Legacy CNC Ornamental wood working mill machines!!! Model 1500 Lot Duplicator


Condition:UsedPrice:US $10,000.00$446 for 24 months *Buy It Now-  Add to 
cart-Best Offer: Make Offer-   Add to watchlistLongtime memberNo returns13 
watchersShipping:Free Local Pickup | See details Item location:Mattoon, 
Illinois, United States Ships to:Local pick-up onlyDelivery:VariesPayments:
*$446 for 24 months. Minimum purchase required.  Apply Now  |  See termsReturns:
| Seller does not accept returns |  See details |


-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/999121399.2519770.1567886878116%40mail.yahoo.com.

Re: mill for sale

['Curt George' via Legacy Ornamental Mills]

 This E-bay sale looks Fishy to me.  Lots of stuff,but No pictures of 1200??? 
only advertisements from catalog.
C.A.G.


Legacy Ornamental mill machines!!! Model 1200 | eBay

| 
| 
| 
| $1895.00 |  |

 |

 |
| 
|  | 
Legacy Ornamental mill machines!!! Model 1200 | eBay

Unit creates various wood moldings such as spindles, spirals, and fluted rope 
moldings. Many other molding profi...
 |

 |

 |





On Saturday, September 7, 2019, 03:56:44 PM EDT, 'Curt George' via Legacy 
Ornamental Mills  wrote:  
 
  Hey guys one more NOTE.On closer look, I do not see a acme screw in the 
photos.  I hope this is just a mistake? the owner stated like new, and limit on 
photos. perhaps it is just not on the unit when the photo was taken? (photo #3.)
C.A.G.On Saturday, September 7, 2019, 03:47:29 PM EDT, Curt George 
 wrote:  
 
  Thanks BillI missed this one. Not a bad price if it stays where it is at?
some good points are this is an older 1000ex. it has a #2MT. on both the head 
and tail-stock, so it can take  lathe adapters, like a drive spur and or live 
center I find this useful, On my Legacy. 
C.A.G.
On Saturday, September 7, 2019, 03:27:12 AM EDT, bulke...@mmnet.com.au 
 wrote:  
 
 #yiv6758404965 -- filtered {panose-1:2 4 5 3 5 4 6 3 2 4;}#yiv6758404965 
filtered {font-family:Calibri;panose-1:2 15 5 2 2 2 4 3 2 4;}#yiv6758404965 
p.yiv6758404965MsoNormal, #yiv6758404965 li.yiv6758404965MsoNormal, 
#yiv6758404965 div.yiv6758404965MsoNormal 
{margin:0cm;margin-bottom:.0001pt;font-size:11.0pt;font-family:sans-serif;}#yiv6758404965
 a:link, #yiv6758404965 span.yiv6758404965MsoHyperlink 
{color:#0563C1;text-decoration:underline;}#yiv6758404965 a:visited, 
#yiv6758404965 span.yiv6758404965MsoHyperlinkFollowed 
{color:#954F72;text-decoration:underline;}#yiv6758404965 
span.yiv6758404965EmailStyle17 
{font-family:sans-serif;color:windowtext;}#yiv6758404965 
.yiv6758404965MsoChpDefault {font-family:sans-serif;}#yiv6758404965 filtered 
{margin:72.0pt 72.0pt 72.0pt 72.0pt;}#yiv6758404965 
div.yiv6758404965WordSection1 {}#yiv6758404965 
Has every one seen this one for sale  
https://www.ebay.com/itm/Wood-Work-Legacy-Ornamental-Wood-Working-Machine-With-Router-Porter-Cable/303267408835?hash=item469c256bc3:g:~NEAAOSwTLpdUvlK

  

  

Bill


|  | Virus-free. www.avast.com  |

 

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/000d01d5654d%24a4bfad50%24ee3f07f0%24%40mmnet.com.au.


-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/158365432.2527732.1567886198915%40mail.yahoo.com.
  

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/1809134514.2553832.1567886556550%40mail.yahoo.com.

Re: mill for sale

['Curt George' via Legacy Ornamental Mills]

 Hey guys one more NOTE.On closer look, I do not see a acme screw in the 
photos.  I hope this is just a mistake? the owner stated like new, and limit on 
photos. perhaps it is just not on the unit when the photo was taken? (photo #3.)
C.A.G.On Saturday, September 7, 2019, 03:47:29 PM EDT, Curt George 
 wrote:  
 
  Thanks BillI missed this one. Not a bad price if it stays where it is at?
some good points are this is an older 1000ex. it has a #2MT. on both the head 
and tail-stock, so it can take  lathe adapters, like a drive spur and or live 
center I find this useful, On my Legacy. 
C.A.G.
On Saturday, September 7, 2019, 03:27:12 AM EDT, bulke...@mmnet.com.au 
 wrote:  
 
 #yiv1598306812 #yiv1598306812 -- filtered {panose-1:2 4 5 3 5 4 6 3 2 
4;}#yiv1598306812 filtered {font-family:Calibri;panose-1:2 15 5 2 2 2 4 3 2 
4;}#yiv1598306812 p.yiv1598306812MsoNormal, #yiv1598306812 
li.yiv1598306812MsoNormal, #yiv1598306812 div.yiv1598306812MsoNormal 
{margin:0cm;margin-bottom:.0001pt;font-size:11.0pt;font-family:sans-serif;}#yiv1598306812
 a:link, #yiv1598306812 span.yiv1598306812MsoHyperlink 
{color:#0563C1;text-decoration:underline;}#yiv1598306812 a:visited, 
#yiv1598306812 span.yiv1598306812MsoHyperlinkFollowed 
{color:#954F72;text-decoration:underline;}#yiv1598306812 
span.yiv1598306812EmailStyle17 
{font-family:sans-serif;color:windowtext;}#yiv1598306812 
.yiv1598306812MsoChpDefault {font-family:sans-serif;}#yiv1598306812 filtered 
{margin:72.0pt 72.0pt 72.0pt 72.0pt;}#yiv1598306812 
div.yiv1598306812WordSection1 {}#yiv1598306812 
Has every one seen this one for sale  
https://www.ebay.com/itm/Wood-Work-Legacy-Ornamental-Wood-Working-Machine-With-Router-Porter-Cable/303267408835?hash=item469c256bc3:g:~NEAAOSwTLpdUvlK

  

  

Bill


|  | Virus-free. www.avast.com  |

 

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/000d01d5654d%24a4bfad50%24ee3f07f0%24%40mmnet.com.au.


-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/158365432.2527732.1567886198915%40mail.yahoo.com.

Re: mill for sale

['Curt George' via Legacy Ornamental Mills]

 Thanks BillI missed this one. Not a bad price if it stays where it is at?
some good points are this is an older 1000ex. it has a #2MT. on both the head 
and tail-stock, so it can take  lathe adapters, like a drive spur and or live 
center I find this useful, On my Legacy. 
C.A.G.
On Saturday, September 7, 2019, 03:27:12 AM EDT, bulke...@mmnet.com.au 
 wrote:  
 
 
Has every one seen this one for sale  
https://www.ebay.com/itm/Wood-Work-Legacy-Ornamental-Wood-Working-Machine-With-Router-Porter-Cable/303267408835?hash=item469c256bc3:g:~NEAAOSwTLpdUvlK

  

  

Bill


|  | Virus-free. www.avast.com  |

 

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/000d01d5654d%24a4bfad50%24ee3f07f0%24%40mmnet.com.au.
  

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/936198097.2536459.1567885649311%40mail.yahoo.com.

Re: Lathe Centers Sale - Check this out.

[Tim Ziegler]

How do you like you 4224 Mike? She's a beauty through and through, only
wish I had the extension though. This last job
I ended up putting my Shop smith live center in to get the length. They say
its 42 but it will not do more then about 36 if your lucky.
I sure do some checking on that as the stats claim 42 from center to center
h.
Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Sat, Sep 7, 2019 at 7:48 AM Michael Kratky 
wrote:

> Hi Tim,
>
> Shop Smith has the best duplicator for those of you doing any kind of
> production work or prepping for the LOM, adaptable to most midsized lathes,
> just my 2₵ of advice,
>
> BTW, I also have a 4224B Powermatic
>
>
>
> Mike K
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com [mailto:
> legacy-ornamental-mills@googlegroups.com] *On Behalf Of *Tim Ziegler
> *Sent:* Friday, September 06, 2019 9:44 PM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* Re: Lathe Centers Sale - Check this out.
>
>
>
> Thanks Mac,
>
>
>
> Yes several of us tool junkies have far to many toys e I mean tools
> lol.
>
> LOM, WC, Shop Smith and 4224 B by PM. but who counts.
>
> Thanks for the sale tip.
>
>
> Kind Regards,
>
>
>
> Timothy J. Ziegler
>
> Ziegler WoodWork & Specialty
>
> 14171 160th Ave.
>
> Foreston MN 56330
>
>
>
> 320-294-5798 shop
>
> 320-630-2243 cell
>
>
>
>
>
> On Fri, Sep 6, 2019 at 7:51 PM MWF  wrote:
>
> Greetings everyone,
>
>
>
> Scroll to the bottom of the email at the below link to a "Turning Sale"
> that Shopsmith is having. (EVEN if you do not own a Shopsmith.)
>
> There you will find they have their lathe centers on sale - as well as
> their faceplates.
>
>
>
> I know that many of our Group Members own at least one Shopsmith in
> addition to their Legacy Mill.
>
> In any case, I think the lathe centers should work on both machines.
> Their quality has always been very good - and these prices are good
> considering what you are getting.  And, like with Legacy, I have found
> Shopsmith's Customer Service to be very good.
>
> Enjoy!
>
> Mac
>
>
>
> Here's the link:  https://www.shopsmith.com/ownersite/specials/7DV366
>
>
> --
> --
>
> *Franklin was right* - when the "Takers" outnumber the "Makers" - the
> Republic is DOOMED!
>
> "*When the people find that they can vote themselves money - that will
> herald the end of The Republic*." Benjamin Franklin
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/998936422.13667.1567817459362%40wamui-berry.atl.sa.earthlink.net
> 
> .
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLEnnQtzOSGpxzscYW41sx7OWs8S-%3DvobadLbb_MW43O5w%40mail.gmail.com
> 
> .
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/003901d5657a%247ba9aab0%2472fd0010%24%40com
> 
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLGKdErtjnfx81KVtymX5n-1Tus9-8yG-KOFUx0__MwqDQ%40mail.gmail.com.

Re: Lathe Centers Sale - Check this out.

[MWF]

Tim,Very nice work.Thanks for sharing.Mac-Original Message-
From: Tim Ziegler 
Sent: Sep 7, 2019 9:21 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Lathe Centers Sale - Check this out.

Thanks Mac,Yes it is indeed a very good duplicator.  I have it along with a Vega duplicator for my PM. Shouldn't be any spindle I can't turn right. Here's an order I just finished on the 4224BAlong with a door and side glass combo. qtr sawn/rift sawn WOKind Regards,Timothy J. ZieglerZiegler WoodWork & Specialty14171 160th Ave.Foreston MN 56330320-294-5798 shop320-630-2243 cellOn Sat, Sep 7, 2019 at 7:48 AM Michael Kratky  wrote:Hi Tim,Shop Smith has the best duplicator for those of you doing any kind of production work or prepping for the LOM, adaptable to most midsized lathes, just my 2₵ of advice,BTW, I also have a 4224B Powermatic Mike K From: legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Tim ZieglerSent: Friday, September 06, 2019 9:44 PMTo: legacy-ornamental-mills@googlegroups.comSubject: Re: Lathe Centers Sale - Check this out. Thanks Mac, Yes several of us tool junkies have far to many toys e I mean tools lol. LOM, WC, Shop Smith and 4224 B by PM. but who counts. Thanks for the sale tip. Kind Regards, Timothy J. ZieglerZiegler WoodWork & Specialty14171 160th Ave.Foreston MN 56330 320-294-5798 shop320-630-2243 cell  On Fri, Sep 6, 2019 at 7:51 PM MWF  wrote:Greetings everyone, Scroll to the bottom of the email at the below link to a "Turning Sale" that Shopsmith is having. (EVEN if you do not own a Shopsmith.)There you will find they have their lathe centers on sale - as well as their faceplates. I know that many of our Group Members own at least one Shopsmith in addition to their Legacy Mill.In any case, I think the lathe centers should work on both machines.  Their quality has always been very good - and these prices are good considering what you are getting.  And, like with Legacy, I have found Shopsmith's Customer Service to be very good.Enjoy!Mac Here's the link:  https://www.shopsmith.com/ownersite/specials/7DV366 Franklin was right - when the "Takers" outnumber the "Makers" - the Republic is DOOMED!"When the people find that they can vote themselves money - that will herald the end of The Republic." Benjamin Franklin



-- 
You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/1712084598.1813.1567867919500%40wamui-berry.atl.sa.earthlink.net.

Re: Lathe Centers Sale - Check this out.

[Tim Ziegler]

Sorry Mike,

Yes for sure thanks for the input. I have one and I love it. but tend to
use the Vega more now.

Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Sat, Sep 7, 2019 at 7:48 AM Michael Kratky 
wrote:

> Hi Tim,
>
> Shop Smith has the best duplicator for those of you doing any kind of
> production work or prepping for the LOM, adaptable to most midsized lathes,
> just my 2₵ of advice,
>
> BTW, I also have a 4224B Powermatic
>
>
>
> Mike K
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com [mailto:
> legacy-ornamental-mills@googlegroups.com] *On Behalf Of *Tim Ziegler
> *Sent:* Friday, September 06, 2019 9:44 PM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* Re: Lathe Centers Sale - Check this out.
>
>
>
> Thanks Mac,
>
>
>
> Yes several of us tool junkies have far to many toys e I mean tools
> lol.
>
> LOM, WC, Shop Smith and 4224 B by PM. but who counts.
>
> Thanks for the sale tip.
>
>
> Kind Regards,
>
>
>
> Timothy J. Ziegler
>
> Ziegler WoodWork & Specialty
>
> 14171 160th Ave.
>
> Foreston MN 56330
>
>
>
> 320-294-5798 shop
>
> 320-630-2243 cell
>
>
>
>
>
> On Fri, Sep 6, 2019 at 7:51 PM MWF  wrote:
>
> Greetings everyone,
>
>
>
> Scroll to the bottom of the email at the below link to a "Turning Sale"
> that Shopsmith is having. (EVEN if you do not own a Shopsmith.)
>
> There you will find they have their lathe centers on sale - as well as
> their faceplates.
>
>
>
> I know that many of our Group Members own at least one Shopsmith in
> addition to their Legacy Mill.
>
> In any case, I think the lathe centers should work on both machines.
> Their quality has always been very good - and these prices are good
> considering what you are getting.  And, like with Legacy, I have found
> Shopsmith's Customer Service to be very good.
>
> Enjoy!
>
> Mac
>
>
>
> Here's the link:  https://www.shopsmith.com/ownersite/specials/7DV366
>
>
> --
> --
>
> *Franklin was right* - when the "Takers" outnumber the "Makers" - the
> Republic is DOOMED!
>
> "*When the people find that they can vote themselves money - that will
> herald the end of The Republic*." Benjamin Franklin
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/998936422.13667.1567817459362%40wamui-berry.atl.sa.earthlink.net
> 
> .
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLEnnQtzOSGpxzscYW41sx7OWs8S-%3DvobadLbb_MW43O5w%40mail.gmail.com
> 
> .
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/003901d5657a%247ba9aab0%2472fd0010%24%40com
> 
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLHCz%2BncrK%2BO85Qw-XQ%3DAAXND4HHbSedrr8-FBEvOZ6kcg%40mail.gmail.com.

RE: Lathe Centers Sale - Check this out.

[Michael Kratky]

Hi Tim,

Shop Smith has the best duplicator for those of you doing any kind of 
production work or prepping for the LOM, adaptable to most midsized lathes, 
just my 2₵ of advice,

BTW, I also have a 4224B Powermatic

 

Mike K

 

From: legacy-ornamental-mills@googlegroups.com 
[mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Tim Ziegler
Sent: Friday, September 06, 2019 9:44 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Lathe Centers Sale - Check this out.

 

Thanks Mac,

 

Yes several of us tool junkies have far to many toys e I mean tools lol. 

LOM, WC, Shop Smith and 4224 B by PM. but who counts. 

Thanks for the sale tip. 




Kind Regards,

 

Timothy J. Ziegler

Ziegler WoodWork & Specialty

14171 160th Ave.

Foreston MN 56330

 

320-294-5798 shop

320-630-2243 cell

 

 

On Fri, Sep 6, 2019 at 7:51 PM MWF  wrote:

Greetings everyone,

 

Scroll to the bottom of the email at the below link to a "Turning Sale" that 
Shopsmith is having. (EVEN if you do not own a Shopsmith.)

There you will find they have their lathe centers on sale - as well as their 
faceplates.

 

I know that many of our Group Members own at least one Shopsmith in addition to 
their Legacy Mill.

In any case, I think the lathe centers should work on both machines.  Their 
quality has always been very good - and these prices are good considering what 
you are getting.  And, like with Legacy, I have found Shopsmith's Customer 
Service to be very good.

Enjoy!

Mac

 

Here's the link:  https://www.shopsmith.com/ownersite/specials/7DV366

 


  _  


  _  


Franklin was right - when the "Takers" outnumber the "Makers" - the Republic is 
DOOMED!

"When the people find that they can vote themselves money - that will herald 
the end of The Republic." Benjamin Franklin

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/998936422.13667.1567817459362%40wamui-berry.atl.sa.earthlink.net
 

 .

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLEnnQtzOSGpxzscYW41sx7OWs8S-%3DvobadLbb_MW43O5w%40mail.gmail.com
 

 .

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/003901d5657a%247ba9aab0%2472fd0010%24%40com.

mill for sale

[bulkeley]

Has every one seen this one for sale

https://www.ebay.com/itm/Wood-Work-Legacy-Ornamental-Wood-Working-Machine-Wi
th-Router-Porter-Cable/303267408835?hash=item469c256bc3:g:~NEAAOSwTLpdUvlK

 

 

Bill



---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/000d01d5654d%24a4bfad50%24ee3f07f0%24%40mmnet.com.au.