RE: Dadoing drawer sides on the LOM1200

2021-08-07 Thread bulkeley 
Yes my last goal is to own a legacy Z axis I know I can make one but I would 
like a legacy one too. And of course I always want your rotary cross slide 
yours is the only one I have ever seen.

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of Tim Ziegler
Sent: Sunday, 8 August 2021 1:25 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Dadoing drawer sides on the LOM1200

 

Sounds pretty awesome though. 

Guess I better start looking for more parts lol. 

Have a good night. 




Kind Regards,

 

Timothy J. Ziegler

Ziegler WoodWork & Specialty

14171 160th Ave.

Foreston MN 56330

 

320-294-5798 shop

320-630-2243 cell

 

 

On Sat, Aug 7, 2021 at 10:22 PM mailto:bulke...@mmnet.com.au> > wrote:

Right, but you can slide both tailstocks all the way to either end to do really 
long work if necessary . I have even milled 2 separate operations and different 
pitches on the one piece at the same time for fun but it’s just too difficult 
to do to be practical and way to long to set up 

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
  
mailto:legacy-ornamental-mills@googlegroups.com> > On Behalf Of Tim Ziegler
Sent: Sunday, 8 August 2021 12:20 PM
To: legacy-ornamental-mills@googlegroups.com 
 
Subject: Re: Dadoing drawer sides on the LOM1200

 

So Bill, you run with two tail stocks in the center and the headstocks on both 
ends then right?


Kind Regards,

 

Timothy J. Ziegler

Ziegler WoodWork & Specialty

14171 160th Ave.

Foreston MN 56330

 

320-294-5798 shop

320-630-2243 cell

 

 

On Sat, Aug 7, 2021 at 7:53 AM mailto:bulke...@mmnet.com.au> > wrote:

Yes that’s why I run 2 saddles, 2 headstocks, 2 tailstocks and 2 leadscrews it 
gives me the option to have 2 separate jobs set up at the same time. Im just 
missing the z axis I really must make another.

As for another split nut didn’t you buy the 5/8X4 acme tap on ebay like me and 
curt did?

That way you can make your own.

 

Bill 

 

From: legacy-ornamental-mills@googlegroups.com 
  
mailto:legacy-ornamental-mills@googlegroups.com> > On Behalf Of Tim Ziegler
Sent: Saturday, 7 August 2021 8:51 PM
To: legacy-ornamental-mills@googlegroups.com 
 
Subject: Re: Dadoing drawer sides on the LOM1200

 

Hey Bill,

 

Yeah I put my Z axis system back on to run more of the dado's and grooves that 
i do.

and put it on the left that way I can still leave my plunge router over on the 
end where I 

tend to play at the moment. I like the plunge action much better for getting 
down into

cut and back out. So much quicker. but the Z axis saddle has a prominent place 
in what 

I am doing when horizontal and vertical milling. Grooves and Dados etc...

I do need to get another complete split nut system for the acme thread though. 
Currently 

I manually slide the Z axis Carriage/saddle. 


Kind Regards,

 

Timothy J. Ziegler

Ziegler WoodWork & Specialty

14171 160th Ave.

Foreston MN 56330

 

320-294-5798 shop

320-630-2243 cell

 

 

On Sat, Aug 7, 2021 at 1:37 AM mailto:bulke...@mmnet.com.au> > wrote:

Not at all Tim all work on the mill is a big deal ,looks like your running 2 
saddles on your mill what a good idea I wonder where you got that idea from?

To a beginner this would be very interesting.

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
  
mailto:legacy-ornamental-mills@googlegroups.com> > On Behalf Of 
timjz...@gmail.com  
Sent: Saturday, 7 August 2021 12:41 PM
To: Legacy Ornamental Mills mailto:legacy-ornamental-mills@googlegroups.com> >
Subject: Dadoing drawer sides on the LOM1200

 

I have been doing a lot of dado's on my LOM 1200

This has been working extremely well as you can see what your doing.

Set up is as quick as the router table or faster and far easier to see. 

I'd assume no big deal to most but this machine has to own up to the 

space it uses in my shop.

I have done many 1/4 dados and several 3/4 X 1/4 deep for cabinet work. 

Here I used the Horizontal vise other times I have a piece of MDF that I mount 

on the rails just for dado's

 

 

Kind regards,

 

Tim J. Ziegler

Ziegler WoodWork & Specialty

14171 160th Ave. 

Foreston MN 56330

 

320-294-5798 shop

320-630-2243 cell

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
 .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/efebc5d7-386e-4bf5-a65f-cdce627cba78n%40googlegroups.com

Re: Dadoing drawer sides on the LOM1200

2021-08-07 Thread Tim Ziegler 
Sounds pretty awesome though.
Guess I better start looking for more parts lol.
Have a good night.

Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Sat, Aug 7, 2021 at 10:22 PM  wrote:

> Right, but you can slide both tailstocks all the way to either end to do
> really long work if necessary . I have even milled 2 separate operations
> and different pitches on the one piece at the same time for fun but it’s
> just too difficult to do to be practical and way to long to set up
>
>
>
> Bill
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Tim Ziegler
> *Sent:* Sunday, 8 August 2021 12:20 PM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* Re: Dadoing drawer sides on the LOM1200
>
>
>
> So Bill, you run with two tail stocks in the center and the headstocks on
> both ends then right?
>
> Kind Regards,
>
>
>
> Timothy J. Ziegler
>
> Ziegler WoodWork & Specialty
>
> 14171 160th Ave.
>
> Foreston MN 56330
>
>
>
> 320-294-5798 shop
>
> 320-630-2243 cell
>
>
>
>
>
> On Sat, Aug 7, 2021 at 7:53 AM  wrote:
>
> Yes that’s why I run 2 saddles, 2 headstocks, 2 tailstocks and 2
> leadscrews it gives me the option to have 2 separate jobs set up at the
> same time. Im just missing the z axis I really must make another.
>
> As for another split nut didn’t you buy the 5/8X4 acme tap on ebay like me
> and curt did?
>
> That way you can make your own.
>
>
>
> Bill
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Tim Ziegler
> *Sent:* Saturday, 7 August 2021 8:51 PM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* Re: Dadoing drawer sides on the LOM1200
>
>
>
> Hey Bill,
>
>
>
> Yeah I put my Z axis system back on to run more of the dado's and grooves
> that i do.
>
> and put it on the left that way I can still leave my plunge router over on
> the end where I
>
> tend to play at the moment. I like the plunge action much better for
> getting down into
>
> cut and back out. So much quicker. but the Z axis saddle has a
> prominent place in what
>
> I am doing when horizontal and vertical milling. Grooves and Dados etc...
>
> I do need to get another complete split nut system for the acme thread
> though. Currently
>
> I manually slide the Z axis Carriage/saddle.
>
> Kind Regards,
>
>
>
> Timothy J. Ziegler
>
> Ziegler WoodWork & Specialty
>
> 14171 160th Ave.
>
> Foreston MN 56330
>
>
>
> 320-294-5798 shop
>
> 320-630-2243 cell
>
>
>
>
>
> On Sat, Aug 7, 2021 at 1:37 AM  wrote:
>
> Not at all Tim all work on the mill is a big deal ,looks like your running
> 2 saddles on your mill what a good idea I wonder where you got that idea
> from?
>
> To a beginner this would be very interesting.
>
> Bill
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *
> timjz...@gmail.com
> *Sent:* Saturday, 7 August 2021 12:41 PM
> *To:* Legacy Ornamental Mills 
> *Subject:* Dadoing drawer sides on the LOM1200
>
>
>
> I have been doing a lot of dado's on my LOM 1200
>
> This has been working extremely well as you can see what your doing.
>
> Set up is as quick as the router table or faster and far easier to see.
>
> I'd assume no big deal to most but this machine has to own up to the
>
> space it uses in my shop.
>
> I have done many 1/4 dados and several 3/4 X 1/4 deep for cabinet work.
>
> Here I used the Horizontal vise other times I have a piece of MDF that I
> mount
>
> on the rails just for dado's
>
>
>
>
>
> Kind regards,
>
>
>
> Tim J. Ziegler
>
> Ziegler WoodWork & Specialty
>
> 14171 160th Ave.
>
> Foreston MN 56330
>
>
>
> 320-294-5798 shop
>
> 320-630-2243 cell
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/efebc5d7-386e-4bf5-a65f-cdce627cba78n%40googlegroups.com
> 
> .
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/01d78b56%24b6f50c00%2424df2400%24%40mmnet.com.au
> 
> .
>
> --
> You received this message because you

RE: Dadoing drawer sides on the LOM1200

2021-08-07 Thread bulkeley 
Right, but you can slide both tailstocks all the way to either end to do really 
long work if necessary . I have even milled 2 separate operations and different 
pitches on the one piece at the same time for fun but it’s just too difficult 
to do to be practical and way to long to set up 

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of Tim Ziegler
Sent: Sunday, 8 August 2021 12:20 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Dadoing drawer sides on the LOM1200

 

So Bill, you run with two tail stocks in the center and the headstocks on both 
ends then right?


Kind Regards,

 

Timothy J. Ziegler

Ziegler WoodWork & Specialty

14171 160th Ave.

Foreston MN 56330

 

320-294-5798 shop

320-630-2243 cell

 

 

On Sat, Aug 7, 2021 at 7:53 AM mailto:bulke...@mmnet.com.au> > wrote:

Yes that’s why I run 2 saddles, 2 headstocks, 2 tailstocks and 2 leadscrews it 
gives me the option to have 2 separate jobs set up at the same time. Im just 
missing the z axis I really must make another.

As for another split nut didn’t you buy the 5/8X4 acme tap on ebay like me and 
curt did?

That way you can make your own.

 

Bill 

 

From: legacy-ornamental-mills@googlegroups.com 
  
mailto:legacy-ornamental-mills@googlegroups.com> > On Behalf Of Tim Ziegler
Sent: Saturday, 7 August 2021 8:51 PM
To: legacy-ornamental-mills@googlegroups.com 
 
Subject: Re: Dadoing drawer sides on the LOM1200

 

Hey Bill,

 

Yeah I put my Z axis system back on to run more of the dado's and grooves that 
i do.

and put it on the left that way I can still leave my plunge router over on the 
end where I 

tend to play at the moment. I like the plunge action much better for getting 
down into

cut and back out. So much quicker. but the Z axis saddle has a prominent place 
in what 

I am doing when horizontal and vertical milling. Grooves and Dados etc...

I do need to get another complete split nut system for the acme thread though. 
Currently 

I manually slide the Z axis Carriage/saddle. 


Kind Regards,

 

Timothy J. Ziegler

Ziegler WoodWork & Specialty

14171 160th Ave.

Foreston MN 56330

 

320-294-5798 shop

320-630-2243 cell

 

 

On Sat, Aug 7, 2021 at 1:37 AM mailto:bulke...@mmnet.com.au> > wrote:

Not at all Tim all work on the mill is a big deal ,looks like your running 2 
saddles on your mill what a good idea I wonder where you got that idea from?

To a beginner this would be very interesting.

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
  
mailto:legacy-ornamental-mills@googlegroups.com> > On Behalf Of 
timjz...@gmail.com  
Sent: Saturday, 7 August 2021 12:41 PM
To: Legacy Ornamental Mills mailto:legacy-ornamental-mills@googlegroups.com> >
Subject: Dadoing drawer sides on the LOM1200

 

I have been doing a lot of dado's on my LOM 1200

This has been working extremely well as you can see what your doing.

Set up is as quick as the router table or faster and far easier to see. 

I'd assume no big deal to most but this machine has to own up to the 

space it uses in my shop.

I have done many 1/4 dados and several 3/4 X 1/4 deep for cabinet work. 

Here I used the Horizontal vise other times I have a piece of MDF that I mount 

on the rails just for dado's

 

 

Kind regards,

 

Tim J. Ziegler

Ziegler WoodWork & Specialty

14171 160th Ave. 

Foreston MN 56330

 

320-294-5798 shop

320-630-2243 cell

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
 .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/efebc5d7-386e-4bf5-a65f-cdce627cba78n%40googlegroups.com
 

 .

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
 .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/01d78b56%24b6f50c00%2424df2400%24%40mmnet.com.au
 

 .

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an

Re: Dadoing drawer sides on the LOM1200

2021-08-07 Thread Tim Ziegler 
So Bill, you run with two tail stocks in the center and the headstocks on
both ends then right?
Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Sat, Aug 7, 2021 at 7:53 AM  wrote:

> Yes that’s why I run 2 saddles, 2 headstocks, 2 tailstocks and 2
> leadscrews it gives me the option to have 2 separate jobs set up at the
> same time. Im just missing the z axis I really must make another.
>
> As for another split nut didn’t you buy the 5/8X4 acme tap on ebay like me
> and curt did?
>
> That way you can make your own.
>
>
>
> Bill
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Tim Ziegler
> *Sent:* Saturday, 7 August 2021 8:51 PM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* Re: Dadoing drawer sides on the LOM1200
>
>
>
> Hey Bill,
>
>
>
> Yeah I put my Z axis system back on to run more of the dado's and grooves
> that i do.
>
> and put it on the left that way I can still leave my plunge router over on
> the end where I
>
> tend to play at the moment. I like the plunge action much better for
> getting down into
>
> cut and back out. So much quicker. but the Z axis saddle has a
> prominent place in what
>
> I am doing when horizontal and vertical milling. Grooves and Dados etc...
>
> I do need to get another complete split nut system for the acme thread
> though. Currently
>
> I manually slide the Z axis Carriage/saddle.
>
> Kind Regards,
>
>
>
> Timothy J. Ziegler
>
> Ziegler WoodWork & Specialty
>
> 14171 160th Ave.
>
> Foreston MN 56330
>
>
>
> 320-294-5798 shop
>
> 320-630-2243 cell
>
>
>
>
>
> On Sat, Aug 7, 2021 at 1:37 AM  wrote:
>
> Not at all Tim all work on the mill is a big deal ,looks like your running
> 2 saddles on your mill what a good idea I wonder where you got that idea
> from?
>
> To a beginner this would be very interesting.
>
> Bill
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *
> timjz...@gmail.com
> *Sent:* Saturday, 7 August 2021 12:41 PM
> *To:* Legacy Ornamental Mills 
> *Subject:* Dadoing drawer sides on the LOM1200
>
>
>
> I have been doing a lot of dado's on my LOM 1200
>
> This has been working extremely well as you can see what your doing.
>
> Set up is as quick as the router table or faster and far easier to see.
>
> I'd assume no big deal to most but this machine has to own up to the
>
> space it uses in my shop.
>
> I have done many 1/4 dados and several 3/4 X 1/4 deep for cabinet work.
>
> Here I used the Horizontal vise other times I have a piece of MDF that I
> mount
>
> on the rails just for dado's
>
>
>
>
>
> Kind regards,
>
>
>
> Tim J. Ziegler
>
> Ziegler WoodWork & Specialty
>
> 14171 160th Ave.
>
> Foreston MN 56330
>
>
>
> 320-294-5798 shop
>
> 320-630-2243 cell
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/efebc5d7-386e-4bf5-a65f-cdce627cba78n%40googlegroups.com
> 
> .
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/01d78b56%24b6f50c00%2424df2400%24%40mmnet.com.au
> 
> .
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLE4N1bqmfyUJAV-EtRQm_A1f9R7fOU70g-WWNdvD7DQLg%40mail.gmail.com
> 
> .
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
>

Re: Dadoing drawer sides on the LOM1200

2021-08-07 Thread Tim Ziegler 
Ok Bill,
I'm heading out to the shop but if you see a link today maybe send it again
and I'll
look.
Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Sat, Aug 7, 2021 at 8:32 AM  wrote:

> Well Tim don’t let the grass grow under your feet, before these taps it
> was 10 years ago that I found 2 only 2 me and Tim K bought them they were
> in the uk and mine burnt in the fire so Tim K has the only original one in
> existence. If the ones on ebay go you will never see another for years if
> ever.
>
>
>
> Bill
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Tim Ziegler
> *Sent:* Saturday, 7 August 2021 11:00 PM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* Re: Dadoing drawer sides on the LOM1200
>
>
>
> Hey Bill,
>
>
>
> No I have not bought that but I would also want the metal plate etc...
> that is used to complete the system.
>
> So I am looking for the complete unit that bolts right on.
>
> I will look into getting one of those soon I think though. I could
> make most everything if I really wanted but
>
> I'm one of those that if it's made buy it. lol
>
> Kind Regards,
>
>
>
> Timothy J. Ziegler
>
> Ziegler WoodWork & Specialty
>
> 14171 160th Ave.
>
> Foreston MN 56330
>
>
>
> 320-294-5798 shop
>
> 320-630-2243 cell
>
>
>
>
>
> On Sat, Aug 7, 2021 at 7:53 AM  wrote:
>
> Yes that’s why I run 2 saddles, 2 headstocks, 2 tailstocks and 2
> leadscrews it gives me the option to have 2 separate jobs set up at the
> same time. Im just missing the z axis I really must make another.
>
> As for another split nut didn’t you buy the 5/8X4 acme tap on ebay like me
> and curt did?
>
> That way you can make your own.
>
>
>
> Bill
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Tim Ziegler
> *Sent:* Saturday, 7 August 2021 8:51 PM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* Re: Dadoing drawer sides on the LOM1200
>
>
>
> Hey Bill,
>
>
>
> Yeah I put my Z axis system back on to run more of the dado's and grooves
> that i do.
>
> and put it on the left that way I can still leave my plunge router over on
> the end where I
>
> tend to play at the moment. I like the plunge action much better for
> getting down into
>
> cut and back out. So much quicker. but the Z axis saddle has a
> prominent place in what
>
> I am doing when horizontal and vertical milling. Grooves and Dados etc...
>
> I do need to get another complete split nut system for the acme thread
> though. Currently
>
> I manually slide the Z axis Carriage/saddle.
>
> Kind Regards,
>
>
>
> Timothy J. Ziegler
>
> Ziegler WoodWork & Specialty
>
> 14171 160th Ave.
>
> Foreston MN 56330
>
>
>
> 320-294-5798 shop
>
> 320-630-2243 cell
>
>
>
>
>
> On Sat, Aug 7, 2021 at 1:37 AM  wrote:
>
> Not at all Tim all work on the mill is a big deal ,looks like your running
> 2 saddles on your mill what a good idea I wonder where you got that idea
> from?
>
> To a beginner this would be very interesting.
>
> Bill
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *
> timjz...@gmail.com
> *Sent:* Saturday, 7 August 2021 12:41 PM
> *To:* Legacy Ornamental Mills 
> *Subject:* Dadoing drawer sides on the LOM1200
>
>
>
> I have been doing a lot of dado's on my LOM 1200
>
> This has been working extremely well as you can see what your doing.
>
> Set up is as quick as the router table or faster and far easier to see.
>
> I'd assume no big deal to most but this machine has to own up to the
>
> space it uses in my shop.
>
> I have done many 1/4 dados and several 3/4 X 1/4 deep for cabinet work.
>
> Here I used the Horizontal vise other times I have a piece of MDF that I
> mount
>
> on the rails just for dado's
>
>
>
>
>
> Kind regards,
>
>
>
> Tim J. Ziegler
>
> Ziegler WoodWork & Specialty
>
> 14171 160th Ave.
>
> Foreston MN 56330
>
>
>
> 320-294-5798 shop
>
> 320-630-2243 cell
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/efebc5d7-386e-4bf5-a65f-cdce627cba78n%40googlegroups.com
> 
> .
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
>

RE: Dadoing drawer sides on the LOM1200

2021-08-07 Thread bulkeley 
Well Tim don’t let the grass grow under your feet, before these taps it was 10 
years ago that I found 2 only 2 me and Tim K bought them they were in the uk 
and mine burnt in the fire so Tim K has the only original one in existence. If 
the ones on ebay go you will never see another for years if ever.

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of Tim Ziegler
Sent: Saturday, 7 August 2021 11:00 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Dadoing drawer sides on the LOM1200

 

Hey Bill,

 

No I have not bought that but I would also want the metal plate etc... that is 
used to complete the system. 

So I am looking for the complete unit that bolts right on. 

I will look into getting one of those soon I think though. I could make most 
everything if I really wanted but

I'm one of those that if it's made buy it. lol 


Kind Regards,

 

Timothy J. Ziegler

Ziegler WoodWork & Specialty

14171 160th Ave.

Foreston MN 56330

 

320-294-5798 shop

320-630-2243 cell

 

 

On Sat, Aug 7, 2021 at 7:53 AM mailto:bulke...@mmnet.com.au> > wrote:

Yes that’s why I run 2 saddles, 2 headstocks, 2 tailstocks and 2 leadscrews it 
gives me the option to have 2 separate jobs set up at the same time. Im just 
missing the z axis I really must make another.

As for another split nut didn’t you buy the 5/8X4 acme tap on ebay like me and 
curt did?

That way you can make your own.

 

Bill 

 

From: legacy-ornamental-mills@googlegroups.com 
  
mailto:legacy-ornamental-mills@googlegroups.com> > On Behalf Of Tim Ziegler
Sent: Saturday, 7 August 2021 8:51 PM
To: legacy-ornamental-mills@googlegroups.com 
 
Subject: Re: Dadoing drawer sides on the LOM1200

 

Hey Bill,

 

Yeah I put my Z axis system back on to run more of the dado's and grooves that 
i do.

and put it on the left that way I can still leave my plunge router over on the 
end where I 

tend to play at the moment. I like the plunge action much better for getting 
down into

cut and back out. So much quicker. but the Z axis saddle has a prominent place 
in what 

I am doing when horizontal and vertical milling. Grooves and Dados etc...

I do need to get another complete split nut system for the acme thread though. 
Currently 

I manually slide the Z axis Carriage/saddle. 


Kind Regards,

 

Timothy J. Ziegler

Ziegler WoodWork & Specialty

14171 160th Ave.

Foreston MN 56330

 

320-294-5798 shop

320-630-2243 cell

 

 

On Sat, Aug 7, 2021 at 1:37 AM mailto:bulke...@mmnet.com.au> > wrote:

Not at all Tim all work on the mill is a big deal ,looks like your running 2 
saddles on your mill what a good idea I wonder where you got that idea from?

To a beginner this would be very interesting.

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
  
mailto:legacy-ornamental-mills@googlegroups.com> > On Behalf Of 
timjz...@gmail.com  
Sent: Saturday, 7 August 2021 12:41 PM
To: Legacy Ornamental Mills mailto:legacy-ornamental-mills@googlegroups.com> >
Subject: Dadoing drawer sides on the LOM1200

 

I have been doing a lot of dado's on my LOM 1200

This has been working extremely well as you can see what your doing.

Set up is as quick as the router table or faster and far easier to see. 

I'd assume no big deal to most but this machine has to own up to the 

space it uses in my shop.

I have done many 1/4 dados and several 3/4 X 1/4 deep for cabinet work. 

Here I used the Horizontal vise other times I have a piece of MDF that I mount 

on the rails just for dado's

 

 

Kind regards,

 

Tim J. Ziegler

Ziegler WoodWork & Specialty

14171 160th Ave. 

Foreston MN 56330

 

320-294-5798 shop

320-630-2243 cell

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
 .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/efebc5d7-386e-4bf5-a65f-cdce627cba78n%40googlegroups.com
 

 .

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
 .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/01d78b56%24b6f50c00%2424df2400%24%40mmnet.com.au

Re: Re Group security

2021-08-07 Thread Tim Ziegler 
I have a router forum that seems to hear our voices as everything show up
on there.

Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Sat, Aug 7, 2021 at 7:55 AM  wrote:

> I don’t know what I’m doing right I don’t get a single one
>
> Bill
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Tim Ziegler
> *Sent:* Saturday, 7 August 2021 8:58 PM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* Re: Re Group security
>
>
>
> Hi Bridgette,
>
>
>
> Yes the security systems emails have gone rampant here in the states and
> they
>
> seem to insert them everywhere. Seems like if you even talk about something
>
> now days it shows up as ads almost instantly.
>
> Its funny because we get tons of you tube from the Aussie side too so not
> sure
>
> how it can be avoided. Good luck with it.
>
>
>
>
> Kind Regards,
>
>
>
> Timothy J. Ziegler
>
> Ziegler WoodWork & Specialty
>
> 14171 160th Ave.
>
> Foreston MN 56330
>
>
>
> 320-294-5798 shop
>
> 320-630-2243 cell
>
>
>
>
>
> On Sat, Aug 7, 2021 at 4:30 AM  wrote:
>
> No problem Brigitte I will forward your email to Tim K.
>
>
>
> Bill
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Brigitte Graham
> *Sent:* Saturday, 7 August 2021 7:16 PM
> *To:* legacy-ornamental-mills 
> *Subject:* Re Group security
>
>
>
> Morning/Afternoon People,
>
> I am a little worried that the group's security has been breached.
>
> Here in the UK, I am getting lots of emails from USA insurance/home
> security firms pushing me to install one of their systems. I know I can
> (and do) just delete the emails. The only contact I have with USA is
> through this group, so I am assuming that our LOM group has been
> infiltrated?
>
> Please could someone check this out?
>
> Cheers
>
> Brigitte
>
>
>
>
>
>
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/CAPjOc2PtUmB0vahjCsSGmRMb7Tss-%3DE36EsGjfYmLXsXvVgGQw%40mail.gmail.com
> 
> .
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/000401d78b6e%24d0c84c10%247258e430%24%40mmnet.com.au
> 
> .
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLHEXjaHM88XuRh6hUQnnrWfASJO5gX91KoLA_cehok%2BeA%40mail.gmail.com
> 
> .
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/001201d78b8b%246c143e60%24443cbb20%24%40mmnet.com.au
> 
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLGL4ReyyeP%2BSTGUDOmiiYmPE9cjPnLT5rRhH6Dfp%2Bi%3DQg%40mail.gmail.com.

Re: Dadoing drawer sides on the LOM1200

2021-08-07 Thread Tim Ziegler 
Hey Bill,

No I have not bought that but I would also want the metal plate etc... that
is used to complete the system.
So I am looking for the complete unit that bolts right on.
I will look into getting one of those soon I think though. I could
make most everything if I really wanted but
I'm one of those that if it's made buy it. lol
Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Sat, Aug 7, 2021 at 7:53 AM  wrote:

> Yes that’s why I run 2 saddles, 2 headstocks, 2 tailstocks and 2
> leadscrews it gives me the option to have 2 separate jobs set up at the
> same time. Im just missing the z axis I really must make another.
>
> As for another split nut didn’t you buy the 5/8X4 acme tap on ebay like me
> and curt did?
>
> That way you can make your own.
>
>
>
> Bill
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Tim Ziegler
> *Sent:* Saturday, 7 August 2021 8:51 PM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* Re: Dadoing drawer sides on the LOM1200
>
>
>
> Hey Bill,
>
>
>
> Yeah I put my Z axis system back on to run more of the dado's and grooves
> that i do.
>
> and put it on the left that way I can still leave my plunge router over on
> the end where I
>
> tend to play at the moment. I like the plunge action much better for
> getting down into
>
> cut and back out. So much quicker. but the Z axis saddle has a
> prominent place in what
>
> I am doing when horizontal and vertical milling. Grooves and Dados etc...
>
> I do need to get another complete split nut system for the acme thread
> though. Currently
>
> I manually slide the Z axis Carriage/saddle.
>
> Kind Regards,
>
>
>
> Timothy J. Ziegler
>
> Ziegler WoodWork & Specialty
>
> 14171 160th Ave.
>
> Foreston MN 56330
>
>
>
> 320-294-5798 shop
>
> 320-630-2243 cell
>
>
>
>
>
> On Sat, Aug 7, 2021 at 1:37 AM  wrote:
>
> Not at all Tim all work on the mill is a big deal ,looks like your running
> 2 saddles on your mill what a good idea I wonder where you got that idea
> from?
>
> To a beginner this would be very interesting.
>
> Bill
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *
> timjz...@gmail.com
> *Sent:* Saturday, 7 August 2021 12:41 PM
> *To:* Legacy Ornamental Mills 
> *Subject:* Dadoing drawer sides on the LOM1200
>
>
>
> I have been doing a lot of dado's on my LOM 1200
>
> This has been working extremely well as you can see what your doing.
>
> Set up is as quick as the router table or faster and far easier to see.
>
> I'd assume no big deal to most but this machine has to own up to the
>
> space it uses in my shop.
>
> I have done many 1/4 dados and several 3/4 X 1/4 deep for cabinet work.
>
> Here I used the Horizontal vise other times I have a piece of MDF that I
> mount
>
> on the rails just for dado's
>
>
>
>
>
> Kind regards,
>
>
>
> Tim J. Ziegler
>
> Ziegler WoodWork & Specialty
>
> 14171 160th Ave.
>
> Foreston MN 56330
>
>
>
> 320-294-5798 shop
>
> 320-630-2243 cell
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/efebc5d7-386e-4bf5-a65f-cdce627cba78n%40googlegroups.com
> 
> .
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/01d78b56%24b6f50c00%2424df2400%24%40mmnet.com.au
> 
> .
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLE4N1bqmfyUJAV-EtRQm_A1f9R7fOU70g-WWNdvD7DQLg%40mail.gmail.com
> 
> .
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To

RE: Re Group security

2021-08-07 Thread bulkeley 
I don’t know what I’m doing right I don’t get a single one

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of Tim Ziegler
Sent: Saturday, 7 August 2021 8:58 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Re Group security

 

Hi Bridgette,

 

Yes the security systems emails have gone rampant here in the states and they 

seem to insert them everywhere. Seems like if you even talk about something

now days it shows up as ads almost instantly. 

Its funny because we get tons of you tube from the Aussie side too so not sure 

how it can be avoided. Good luck with it. 

 




Kind Regards,

 

Timothy J. Ziegler

Ziegler WoodWork & Specialty

14171 160th Ave.

Foreston MN 56330

 

320-294-5798 shop

320-630-2243 cell

 

 

On Sat, Aug 7, 2021 at 4:30 AM mailto:bulke...@mmnet.com.au> > wrote:

No problem Brigitte I will forward your email to Tim K.

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
  
mailto:legacy-ornamental-mills@googlegroups.com> > On Behalf Of Brigitte Graham
Sent: Saturday, 7 August 2021 7:16 PM
To: legacy-ornamental-mills mailto:legacy-ornamental-mills@googlegroups.com> >
Subject: Re Group security

 

Morning/Afternoon People,

I am a little worried that the group's security has been breached.

Here in the UK, I am getting lots of emails from USA insurance/home security 
firms pushing me to install one of their systems. I know I can (and do) just 
delete the emails. The only contact I have with USA is through this group, so I 
am assuming that our LOM group has been infiltrated? 

Please could someone check this out?

Cheers

Brigitte

 

 

 

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
 .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAPjOc2PtUmB0vahjCsSGmRMb7Tss-%3DE36EsGjfYmLXsXvVgGQw%40mail.gmail.com
 

 .

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
 .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/000401d78b6e%24d0c84c10%247258e430%24%40mmnet.com.au
 

 .

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
 .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLHEXjaHM88XuRh6hUQnnrWfASJO5gX91KoLA_cehok%2BeA%40mail.gmail.com
 

 .

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/001201d78b8b%246c143e60%24443cbb20%24%40mmnet.com.au.

RE: Dadoing drawer sides on the LOM1200

2021-08-07 Thread bulkeley 
Yes that’s why I run 2 saddles, 2 headstocks, 2 tailstocks and 2 leadscrews it 
gives me the option to have 2 separate jobs set up at the same time. Im just 
missing the z axis I really must make another.

As for another split nut didn’t you buy the 5/8X4 acme tap on ebay like me and 
curt did?

That way you can make your own.

 

Bill 

 

From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of Tim Ziegler
Sent: Saturday, 7 August 2021 8:51 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Dadoing drawer sides on the LOM1200

 

Hey Bill,

 

Yeah I put my Z axis system back on to run more of the dado's and grooves that 
i do.

and put it on the left that way I can still leave my plunge router over on the 
end where I 

tend to play at the moment. I like the plunge action much better for getting 
down into

cut and back out. So much quicker. but the Z axis saddle has a prominent place 
in what 

I am doing when horizontal and vertical milling. Grooves and Dados etc...

I do need to get another complete split nut system for the acme thread though. 
Currently 

I manually slide the Z axis Carriage/saddle. 


Kind Regards,

 

Timothy J. Ziegler

Ziegler WoodWork & Specialty

14171 160th Ave.

Foreston MN 56330

 

320-294-5798 shop

320-630-2243 cell

 

 

On Sat, Aug 7, 2021 at 1:37 AM mailto:bulke...@mmnet.com.au> > wrote:

Not at all Tim all work on the mill is a big deal ,looks like your running 2 
saddles on your mill what a good idea I wonder where you got that idea from?

To a beginner this would be very interesting.

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
  
mailto:legacy-ornamental-mills@googlegroups.com> > On Behalf Of 
timjz...@gmail.com  
Sent: Saturday, 7 August 2021 12:41 PM
To: Legacy Ornamental Mills mailto:legacy-ornamental-mills@googlegroups.com> >
Subject: Dadoing drawer sides on the LOM1200

 

I have been doing a lot of dado's on my LOM 1200

This has been working extremely well as you can see what your doing.

Set up is as quick as the router table or faster and far easier to see. 

I'd assume no big deal to most but this machine has to own up to the 

space it uses in my shop.

I have done many 1/4 dados and several 3/4 X 1/4 deep for cabinet work. 

Here I used the Horizontal vise other times I have a piece of MDF that I mount 

on the rails just for dado's

 

 

Kind regards,

 

Tim J. Ziegler

Ziegler WoodWork & Specialty

14171 160th Ave. 

Foreston MN 56330

 

320-294-5798 shop

320-630-2243 cell

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
 .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/efebc5d7-386e-4bf5-a65f-cdce627cba78n%40googlegroups.com
 

 .

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
 .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/01d78b56%24b6f50c00%2424df2400%24%40mmnet.com.au
 

 .

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
 .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLE4N1bqmfyUJAV-EtRQm_A1f9R7fOU70g-WWNdvD7DQLg%40mail.gmail.com
 

 .

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/000d01d78b8b%243535eb00%249fa1c100%24%40mmnet.com.au.

Re: Re Group security

2021-08-07 Thread Tim Ziegler 
Hi Bridgette,

Yes the security systems emails have gone rampant here in the states and
they
seem to insert them everywhere. Seems like if you even talk about something
now days it shows up as ads almost instantly.
Its funny because we get tons of you tube from the Aussie side too so not
sure
how it can be avoided. Good luck with it.


Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Sat, Aug 7, 2021 at 4:30 AM  wrote:

> No problem Brigitte I will forward your email to Tim K.
>
>
>
> Bill
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Brigitte Graham
> *Sent:* Saturday, 7 August 2021 7:16 PM
> *To:* legacy-ornamental-mills 
> *Subject:* Re Group security
>
>
>
> Morning/Afternoon People,
>
> I am a little worried that the group's security has been breached.
>
> Here in the UK, I am getting lots of emails from USA insurance/home
> security firms pushing me to install one of their systems. I know I can
> (and do) just delete the emails. The only contact I have with USA is
> through this group, so I am assuming that our LOM group has been
> infiltrated?
>
> Please could someone check this out?
>
> Cheers
>
> Brigitte
>
>
>
>
>
>
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/CAPjOc2PtUmB0vahjCsSGmRMb7Tss-%3DE36EsGjfYmLXsXvVgGQw%40mail.gmail.com
> 
> .
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/000401d78b6e%24d0c84c10%247258e430%24%40mmnet.com.au
> 
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLHEXjaHM88XuRh6hUQnnrWfASJO5gX91KoLA_cehok%2BeA%40mail.gmail.com.

Re: Dadoing drawer sides on the LOM1200

2021-08-07 Thread Tim Ziegler 
Hey Bill,

Yeah I put my Z axis system back on to run more of the dado's and grooves
that i do.
and put it on the left that way I can still leave my plunge router over on
the end where I
tend to play at the moment. I like the plunge action much better for
getting down into
cut and back out. So much quicker. but the Z axis saddle has a
prominent place in what
I am doing when horizontal and vertical milling. Grooves and Dados etc...
I do need to get another complete split nut system for the acme thread
though. Currently
I manually slide the Z axis Carriage/saddle.
Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Sat, Aug 7, 2021 at 1:37 AM  wrote:

> Not at all Tim all work on the mill is a big deal ,looks like your running
> 2 saddles on your mill what a good idea I wonder where you got that idea
> from?
>
> To a beginner this would be very interesting.
>
> Bill
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *
> timjz...@gmail.com
> *Sent:* Saturday, 7 August 2021 12:41 PM
> *To:* Legacy Ornamental Mills 
> *Subject:* Dadoing drawer sides on the LOM1200
>
>
>
> I have been doing a lot of dado's on my LOM 1200
>
> This has been working extremely well as you can see what your doing.
>
> Set up is as quick as the router table or faster and far easier to see.
>
> I'd assume no big deal to most but this machine has to own up to the
>
> space it uses in my shop.
>
> I have done many 1/4 dados and several 3/4 X 1/4 deep for cabinet work.
>
> Here I used the Horizontal vise other times I have a piece of MDF that I
> mount
>
> on the rails just for dado's
>
>
>
>
>
> Kind regards,
>
>
>
> Tim J. Ziegler
>
> Ziegler WoodWork & Specialty
>
> 14171 160th Ave.
>
> Foreston MN 56330
>
>
>
> 320-294-5798 shop
>
> 320-630-2243 cell
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/efebc5d7-386e-4bf5-a65f-cdce627cba78n%40googlegroups.com
> 
> .
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/01d78b56%24b6f50c00%2424df2400%24%40mmnet.com.au
> 
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLE4N1bqmfyUJAV-EtRQm_A1f9R7fOU70g-WWNdvD7DQLg%40mail.gmail.com.

Re: Re Group security

2021-08-07 Thread Brigitte Graham 
Bill,
Thanks for that
B

On Sat, 7 Aug 2021 at 10:30,  wrote:

> No problem Brigitte I will forward your email to Tim K.
>
>
>
> Bill
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Brigitte Graham
> *Sent:* Saturday, 7 August 2021 7:16 PM
> *To:* legacy-ornamental-mills 
> *Subject:* Re Group security
>
>
>
> Morning/Afternoon People,
>
> I am a little worried that the group's security has been breached.
>
> Here in the UK, I am getting lots of emails from USA insurance/home
> security firms pushing me to install one of their systems. I know I can
> (and do) just delete the emails. The only contact I have with USA is
> through this group, so I am assuming that our LOM group has been
> infiltrated?
>
> Please could someone check this out?
>
> Cheers
>
> Brigitte
>
>
>
>
>
>
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/CAPjOc2PtUmB0vahjCsSGmRMb7Tss-%3DE36EsGjfYmLXsXvVgGQw%40mail.gmail.com
> 
> .
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/000401d78b6e%24d0c84c10%247258e430%24%40mmnet.com.au
> 
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAPjOc2M7a_F4RDoO9VD2%3DoNm_VYwMJ8TQ%2BBUkE9_sfW094Kugg%40mail.gmail.com.

RE: Re Group security

2021-08-07 Thread bulkeley 
No problem Brigitte I will forward your email to Tim K.

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of Brigitte Graham
Sent: Saturday, 7 August 2021 7:16 PM
To: legacy-ornamental-mills 
Subject: Re Group security

 

Morning/Afternoon People,

I am a little worried that the group's security has been breached.

Here in the UK, I am getting lots of emails from USA insurance/home security 
firms pushing me to install one of their systems. I know I can (and do) just 
delete the emails. The only contact I have with USA is through this group, so I 
am assuming that our LOM group has been infiltrated? 

Please could someone check this out?

Cheers

Brigitte

 

 

 

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
 .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAPjOc2PtUmB0vahjCsSGmRMb7Tss-%3DE36EsGjfYmLXsXvVgGQw%40mail.gmail.com
 

 .

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/000401d78b6e%24d0c84c10%247258e430%24%40mmnet.com.au.

Re Group security

2021-08-07 Thread Brigitte Graham 
Morning/Afternoon People,
I am a little worried that the group's security has been breached.
Here in the UK, I am getting lots of emails from USA insurance/home
security firms pushing me to install one of their systems. I know I can
(and do) just delete the emails. The only contact I have with USA is
through this group, so I am assuming that our LOM group has been
infiltrated?
Please could someone check this out?
Cheers
Brigitte

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAPjOc2PtUmB0vahjCsSGmRMb7Tss-%3DE36EsGjfYmLXsXvVgGQw%40mail.gmail.com.

RE: Dadoing drawer sides on the LOM1200

2021-08-07 Thread bulkeley 
Not at all Tim all work on the mill is a big deal ,looks like your running 2 
saddles on your mill what a good idea I wonder where you got that idea from?

To a beginner this would be very interesting.

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of timjz...@gmail.com
Sent: Saturday, 7 August 2021 12:41 PM
To: Legacy Ornamental Mills 
Subject: Dadoing drawer sides on the LOM1200

 

I have been doing a lot of dado's on my LOM 1200

This has been working extremely well as you can see what your doing.

Set up is as quick as the router table or faster and far easier to see. 

I'd assume no big deal to most but this machine has to own up to the 

space it uses in my shop.

I have done many 1/4 dados and several 3/4 X 1/4 deep for cabinet work. 

Here I used the Horizontal vise other times I have a piece of MDF that I mount 

on the rails just for dado's

 

 

Kind regards,

 

Tim J. Ziegler

Ziegler WoodWork & Specialty

14171 160th Ave. 

Foreston MN 56330

 

320-294-5798 shop

320-630-2243 cell

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
 .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/efebc5d7-386e-4bf5-a65f-cdce627cba78n%40googlegroups.com
 

 .

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/01d78b56%24b6f50c00%2424df2400%24%40mmnet.com.au.