RE: Dadoing drawer sides on the LOM1200

[M.W.Foscue]

But - If you start zooming in, Bill's will start to pixelate a lot sooner than 
yours will.
The first ones you sent out were REALLY bad.
Thanks for "fixing things" and re-sending.
Mac
-Original Message-
From: 
Sent: Aug 8, 2021 10:57 PM
To: 
Subject: RE: Dadoing drawer sides on the LOM1200

Yes from 3 meg to around 140KB it takes seconds to do
 
Bill
 
From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of Tim Ziegler
Sent: Monday, 9 August 2021 12:23 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Dadoing drawer sides on the LOM1200


They look as fresh as the ones I sent. Did you shrink them? 
I was trying something new to shrink them but obviously it was not a success. 
lol
Kind Regards,


Timothy J. Ziegler

Ziegler WoodWork  Specialty

14171 160th Ave.

Foreston MN 56330



320-294-5798 shop

320-630-2243 cell








On Sun, Aug 8, 2021 at 9:13 PM  wrote:

Ok got em try these
 
Bill
 
From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of Tim Ziegler
Sent: Monday, 9 August 2021 11:23 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Dadoing drawer sides on the LOM1200


ok I tried to shrink them the quality was there. I'll send them to you Bill.

Kind Regards,


Timothy J. Ziegler

Ziegler WoodWork  Specialty

14171 160th Ave.

Foreston MN 56330



320-294-5798 shop

320-630-2243 cell








On Sun, Aug 8, 2021 at 2:16 PM  wrote:

Tim can you take better pics they are a bit small to see anything properly 
If they are too big to post email them to me and I will fix them and post them 
to the group
 
Bill
 
From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of Tim Ziegler
Sent: Monday, 9 August 2021 2:11 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Dadoing drawer sides on the LOM1200


Hey Mac,


Here you go. 


Kind Regards,


Timothy J. Ziegler

Ziegler WoodWork  Specialty

14171 160th Ave.

Foreston MN 56330



320-294-5798 shop

320-630-2243 cell








On Sun, Aug 8, 2021 at 1:35 AM M.W.Foscue  wrote:

Bill,
"Rotary Cross Slide"?
Pics of one please.
Who owns one?
Mac



-Original Message-
From: 
Sent: Aug 7, 2021 11:35 PM
To: 
Subject: RE: Dadoing drawer sides on the LOM1200

Yes my last goal is to own a legacy Z axis I know I can make one but I would 
like a legacy one too. And of course I always want your rotary cross slide 
yours is the only one I have ever seen.
Bill
 
From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of Tim Ziegler
Sent: Sunday, 8 August 2021 1:25 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Dadoing drawer sides on the LOM1200


Sounds pretty awesome though. 
Guess I better start looking for more parts lol. 

Have a good night. 


Kind Regards,


Timothy J. Ziegler

Ziegler WoodWork  Specialty

14171 160th Ave.

Foreston MN 56330



320-294-5798 shop

320-630-2243 cell








On Sat, Aug 7, 2021 at 10:22 PM  wrote:

Right, but you can slide both tailstocks all the way to either end to do really 
long work if necessary . I have even milled 2 separate operations and different 
pitches on the one piece at the same time for fun but its just too 
difficult to do to be practical and way to long to set up 
 
Bill
 
From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of Tim Ziegler
Sent: Sunday, 8 August 2021 12:20 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Dadoing drawer sides on the LOM1200


So Bill, you run with two tail stocks in the center and the headstocks on both 
ends then right?
Kind Regards,


Timothy J. Ziegler

Ziegler WoodWork  Specialty

14171 160th Ave.

Foreston MN 56330



320-294-5798 shop

320-630-2243 cell







On Sat, Aug 7, 2021 at 7:53 AM  wrote:

Yes thats why I run 2 saddles, 2 headstocks, 2 tailstocks and 2 
leadscrews it gives me the option to have 2 separate jobs set up at the same 
time. Im just missing the z axis I really must make another.
As for another split nut didnt you buy the 5/8X4 acme tap on ebay like 
me and curt did?
That way you can make your own.
 
Bill 
 
From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of Tim Ziegler
Sent: Saturday, 7 August 2021 8:51 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Dadoing drawer sides on the LOM1200


Hey Bill,


Yeah I put my Z axis system back on to run more of the dado's and grooves that 
i do.

and put it on the left that way I can still leave my plunge router over on the 
end where I 

tend to play at the moment. I like the plunge action much better for getting 
down into

cut and back out. So much quicker. but the Z axis saddle has a prominent place 
in what 

I am doing when horizontal and vertical milling. Grooves and Dados etc...

I do need to get another complete split nut system for the acme thread though. 
Currently 

I manually slide the Z axis Carriage/saddle. 
Kind Regards,


Timothy J. Ziegler

Ziegler WoodWork  Specialty

14171 160th Ave.

Foreston MN 56330



320-294-5798 shop

320-630-2243 cell








On Sat, Aug 7, 2021 at 1:37 

RE: Dadoing drawer sides on the LOM1200

[bulkeley]

Yes from 3 meg to around 140KB it takes seconds to do

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of Tim Ziegler
Sent: Monday, 9 August 2021 12:23 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Dadoing drawer sides on the LOM1200

 

They look as fresh as the ones I sent. Did you shrink them? 

I was trying something new to shrink them but obviously it was not a success. 
lol


Kind Regards,

 

Timothy J. Ziegler

Ziegler WoodWork & Specialty

14171 160th Ave.

Foreston MN 56330

 

320-294-5798 shop

320-630-2243 cell

 

 

On Sun, Aug 8, 2021 at 9:13 PM mailto:bulke...@mmnet.com.au> > wrote:

Ok got em try these

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
  
mailto:legacy-ornamental-mills@googlegroups.com> > On Behalf Of Tim Ziegler
Sent: Monday, 9 August 2021 11:23 AM
To: legacy-ornamental-mills@googlegroups.com 
 
Subject: Re: Dadoing drawer sides on the LOM1200

 

ok I tried to shrink them the quality was there. I'll send them to you Bill.




Kind Regards,

 

Timothy J. Ziegler

Ziegler WoodWork & Specialty

14171 160th Ave.

Foreston MN 56330

 

320-294-5798 shop

320-630-2243 cell

 

 

On Sun, Aug 8, 2021 at 2:16 PM mailto:bulke...@mmnet.com.au> > wrote:

Tim can you take better pics they are a bit small to see anything properly 

If they are too big to post email them to me and I will fix them and post them 
to the group

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
  
mailto:legacy-ornamental-mills@googlegroups.com> > On Behalf Of Tim Ziegler
Sent: Monday, 9 August 2021 2:11 AM
To: legacy-ornamental-mills@googlegroups.com 
 
Subject: Re: Dadoing drawer sides on the LOM1200

 

Hey Mac,

 

Here you go. 




Kind Regards,

 

Timothy J. Ziegler

Ziegler WoodWork & Specialty

14171 160th Ave.

Foreston MN 56330

 

320-294-5798 shop

320-630-2243 cell

 

 

On Sun, Aug 8, 2021 at 1:35 AM M.W.Foscue mailto:mwfos...@earthlink.net> > wrote:

Bill,

"Rotary Cross Slide"?

Pics of one please.

Who owns one?

Mac


  _  


  _  


-Original Message-
From: mailto:legacy-ornamental-mills@googlegroups.com> >
Sent: Aug 7, 2021 11:35 PM
To: mailto:legacy-ornamental-mills@googlegroups.com> >
Subject: RE: Dadoing drawer sides on the LOM1200

 

Yes my last goal is to own a legacy Z axis I know I can make one but I would 
like a legacy one too. And of course I always want your rotary cross slide 
yours is the only one I have ever seen.

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
  
mailto:legacy-ornamental-mills@googlegroups.com> > On Behalf Of Tim Ziegler
Sent: Sunday, 8 August 2021 1:25 PM
To: legacy-ornamental-mills@googlegroups.com 
 
Subject: Re: Dadoing drawer sides on the LOM1200

 

Sounds pretty awesome though. 

Guess I better start looking for more parts lol. 

Have a good night. 

 

Kind Regards,

 

Timothy J. Ziegler

Ziegler WoodWork & Specialty

14171 160th Ave.

Foreston MN 56330

 

320-294-5798 shop

320-630-2243 cell

 

 

On Sat, Aug 7, 2021 at 10:22 PM mailto:bulke...@mmnet.com.au> > wrote:

Right, but you can slide both tailstocks all the way to either end to do really 
long work if necessary . I have even milled 2 separate operations and different 
pitches on the one piece at the same time for fun but it’s just too difficult 
to do to be practical and way to long to set up 

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
  
mailto:legacy-ornamental-mills@googlegroups.com> > On Behalf Of Tim Ziegler
Sent: Sunday, 8 August 2021 12:20 PM
To: legacy-ornamental-mills@googlegroups.com 
 
Subject: Re: Dadoing drawer sides on the LOM1200

 

So Bill, you run with two tail stocks in the center and the headstocks on both 
ends then right?

Kind Regards,

 

Timothy J. Ziegler

Ziegler WoodWork & Specialty

14171 160th Ave.

Foreston MN 56330

 

320-294-5798 shop

320-630-2243 cell

 

 

On Sat, Aug 7, 2021 at 7:53 AM mailto:bulke...@mmnet.com.au> > wrote:

Yes that’s why I run 2 saddles, 2 headstocks, 2 tailstocks and 2 leadscrews it 
gives me the option to have 2 separate jobs set up at the same time. Im just 
missing the z axis I really must make another.

As for another split nut didn’t you buy the 5/8X4 acme tap on ebay like me and 
curt did?

That way you can make your own.

 

Bill 

 

From: legacy-ornamental-mills@googlegroups.com 
  
mailto:legacy-ornamental-mills@googlegroups.com> > On Behalf Of Tim Ziegler
Sent: Saturday, 7 August 2021 8:51 PM
To: legacy-ornamental-mills@googlegroups.com 

Re: Dadoing drawer sides on the LOM1200

[Tim Ziegler]

They look as fresh as the ones I sent. Did you shrink them?
I was trying something new to shrink them but obviously it was not a
success. lol
Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Sun, Aug 8, 2021 at 9:13 PM  wrote:

> Ok got em try these
>
>
>
> Bill
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Tim Ziegler
> *Sent:* Monday, 9 August 2021 11:23 AM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* Re: Dadoing drawer sides on the LOM1200
>
>
>
> ok I tried to shrink them the quality was there. I'll send them to you
> Bill.
>
>
> Kind Regards,
>
>
>
> Timothy J. Ziegler
>
> Ziegler WoodWork & Specialty
>
> 14171 160th Ave.
>
> Foreston MN 56330
>
>
>
> 320-294-5798 shop
>
> 320-630-2243 cell
>
>
>
>
>
> On Sun, Aug 8, 2021 at 2:16 PM  wrote:
>
> Tim can you take better pics they are a bit small to see anything properly
>
> If they are too big to post email them to me and I will fix them and post
> them to the group
>
>
>
> Bill
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Tim Ziegler
> *Sent:* Monday, 9 August 2021 2:11 AM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* Re: Dadoing drawer sides on the LOM1200
>
>
>
> Hey Mac,
>
>
>
> Here you go.
>
>
> Kind Regards,
>
>
>
> Timothy J. Ziegler
>
> Ziegler WoodWork & Specialty
>
> 14171 160th Ave.
>
> Foreston MN 56330
>
>
>
> 320-294-5798 shop
>
> 320-630-2243 cell
>
>
>
>
>
> On Sun, Aug 8, 2021 at 1:35 AM M.W.Foscue  wrote:
>
> Bill,
>
> "Rotary Cross Slide"?
>
> Pics of one please.
>
> Who owns one?
>
> Mac
> --
> --
>
> -Original Message-
> From: 
> Sent: Aug 7, 2021 11:35 PM
> To: 
> Subject: RE: Dadoing drawer sides on the LOM1200
>
>
>
> Yes my last goal is to own a legacy Z axis I know I can make one but I
> would like a legacy one too. And of course I always want your rotary cross
> slide yours is the only one I have ever seen.
>
> Bill
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Tim Ziegler
> *Sent:* Sunday, 8 August 2021 1:25 PM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* Re: Dadoing drawer sides on the LOM1200
>
>
>
> Sounds pretty awesome though.
>
> Guess I better start looking for more parts lol.
>
> Have a good night.
>
>
>
> Kind Regards,
>
>
>
> Timothy J. Ziegler
>
> Ziegler WoodWork & Specialty
>
> 14171 160th Ave.
>
> Foreston MN 56330
>
>
>
> 320-294-5798 shop
>
> 320-630-2243 cell
>
>
>
>
>
> On Sat, Aug 7, 2021 at 10:22 PM  wrote:
>
> Right, but you can slide both tailstocks all the way to either end to do
> really long work if necessary . I have even milled 2 separate operations
> and different pitches on the one piece at the same time for fun but it’s
> just too difficult to do to be practical and way to long to set up
>
>
>
> Bill
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Tim Ziegler
> *Sent:* Sunday, 8 August 2021 12:20 PM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* Re: Dadoing drawer sides on the LOM1200
>
>
>
> So Bill, you run with two tail stocks in the center and the headstocks on
> both ends then right?
>
> Kind Regards,
>
>
>
> Timothy J. Ziegler
>
> Ziegler WoodWork & Specialty
>
> 14171 160th Ave.
>
> Foreston MN 56330
>
>
>
> 320-294-5798 shop
>
> 320-630-2243 cell
>
>
>
>
>
> On Sat, Aug 7, 2021 at 7:53 AM  wrote:
>
> Yes that’s why I run 2 saddles, 2 headstocks, 2 tailstocks and 2
> leadscrews it gives me the option to have 2 separate jobs set up at the
> same time. Im just missing the z axis I really must make another.
>
> As for another split nut didn’t you buy the 5/8X4 acme tap on ebay like me
> and curt did?
>
> That way you can make your own.
>
>
>
> Bill
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Tim Ziegler
> *Sent:* Saturday, 7 August 2021 8:51 PM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* Re: Dadoing drawer sides on the LOM1200
>
>
>
> Hey Bill,
>
>
>
> Yeah I put my Z axis system back on to run more of the dado's and grooves
> that i do.
>
> and put it on the left that way I can still leave my plunge router over on
> the end where I
>
> tend to play at the moment. I like the plunge action much better for
> getting down into
>
> cut and back out. So much quicker. but the Z axis saddle has a
> prominent place in what
>
> I am doing when horizontal and vertical milling. Grooves and Dados etc...
>
> I do need to get another complete split nut system for the acme thread
> though. Currently
>
> I manually slide the Z axis Carriage/saddle.
>
> Kind Regards,
>
>
>
> Timothy J. Ziegler
>
> Ziegler WoodWork & 

Re: Dadoing drawer sides on the LOM1200

[Tim Ziegler]

ok I tried to shrink them the quality was there. I'll send them to you Bill.

Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Sun, Aug 8, 2021 at 2:16 PM  wrote:

> Tim can you take better pics they are a bit small to see anything properly
>
> If they are too big to post email them to me and I will fix them and post
> them to the group
>
>
>
> Bill
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Tim Ziegler
> *Sent:* Monday, 9 August 2021 2:11 AM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* Re: Dadoing drawer sides on the LOM1200
>
>
>
> Hey Mac,
>
>
>
> Here you go.
>
>
> Kind Regards,
>
>
>
> Timothy J. Ziegler
>
> Ziegler WoodWork & Specialty
>
> 14171 160th Ave.
>
> Foreston MN 56330
>
>
>
> 320-294-5798 shop
>
> 320-630-2243 cell
>
>
>
>
>
> On Sun, Aug 8, 2021 at 1:35 AM M.W.Foscue  wrote:
>
> Bill,
>
> "Rotary Cross Slide"?
>
> Pics of one please.
>
> Who owns one?
>
> Mac
> --
> --
>
> -Original Message-
> From: 
> Sent: Aug 7, 2021 11:35 PM
> To: 
> Subject: RE: Dadoing drawer sides on the LOM1200
>
>
>
> Yes my last goal is to own a legacy Z axis I know I can make one but I
> would like a legacy one too. And of course I always want your rotary cross
> slide yours is the only one I have ever seen.
>
> Bill
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Tim Ziegler
> *Sent:* Sunday, 8 August 2021 1:25 PM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* Re: Dadoing drawer sides on the LOM1200
>
>
>
> Sounds pretty awesome though.
>
> Guess I better start looking for more parts lol.
>
> Have a good night.
>
>
>
> Kind Regards,
>
>
>
> Timothy J. Ziegler
>
> Ziegler WoodWork & Specialty
>
> 14171 160th Ave.
>
> Foreston MN 56330
>
>
>
> 320-294-5798 shop
>
> 320-630-2243 cell
>
>
>
>
>
> On Sat, Aug 7, 2021 at 10:22 PM  wrote:
>
> Right, but you can slide both tailstocks all the way to either end to do
> really long work if necessary . I have even milled 2 separate operations
> and different pitches on the one piece at the same time for fun but it’s
> just too difficult to do to be practical and way to long to set up
>
>
>
> Bill
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Tim Ziegler
> *Sent:* Sunday, 8 August 2021 12:20 PM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* Re: Dadoing drawer sides on the LOM1200
>
>
>
> So Bill, you run with two tail stocks in the center and the headstocks on
> both ends then right?
>
> Kind Regards,
>
>
>
> Timothy J. Ziegler
>
> Ziegler WoodWork & Specialty
>
> 14171 160th Ave.
>
> Foreston MN 56330
>
>
>
> 320-294-5798 shop
>
> 320-630-2243 cell
>
>
>
>
>
> On Sat, Aug 7, 2021 at 7:53 AM  wrote:
>
> Yes that’s why I run 2 saddles, 2 headstocks, 2 tailstocks and 2
> leadscrews it gives me the option to have 2 separate jobs set up at the
> same time. Im just missing the z axis I really must make another.
>
> As for another split nut didn’t you buy the 5/8X4 acme tap on ebay like me
> and curt did?
>
> That way you can make your own.
>
>
>
> Bill
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Tim Ziegler
> *Sent:* Saturday, 7 August 2021 8:51 PM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* Re: Dadoing drawer sides on the LOM1200
>
>
>
> Hey Bill,
>
>
>
> Yeah I put my Z axis system back on to run more of the dado's and grooves
> that i do.
>
> and put it on the left that way I can still leave my plunge router over on
> the end where I
>
> tend to play at the moment. I like the plunge action much better for
> getting down into
>
> cut and back out. So much quicker. but the Z axis saddle has a
> prominent place in what
>
> I am doing when horizontal and vertical milling. Grooves and Dados etc...
>
> I do need to get another complete split nut system for the acme thread
> though. Currently
>
> I manually slide the Z axis Carriage/saddle.
>
> Kind Regards,
>
>
>
> Timothy J. Ziegler
>
> Ziegler WoodWork & Specialty
>
> 14171 160th Ave.
>
> Foreston MN 56330
>
>
>
> 320-294-5798 shop
>
> 320-630-2243 cell
>
>
>
>
>
> On Sat, Aug 7, 2021 at 1:37 AM  wrote:
>
> Not at all Tim all work on the mill is a big deal ,looks like your running
> 2 saddles on your mill what a good idea I wonder where you got that idea
> from?
>
> To a beginner this would be very interesting.
>
> Bill
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *
> timjz...@gmail.com
> *Sent:* Saturday, 7 August 2021 12:41 PM
> *To:* Legacy Ornamental Mills 
> *Subject:* Dadoing drawer sides on the LOM1200
>
>
>
> I have been doing a lot of dado's on my 

Re: Dadoing drawer sides on the LOM1200

[Tim Ziegler]

right
Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Sun, Aug 8, 2021 at 2:10 PM  wrote:

> Any time is a good time to play when a legacy is involved 
>
>
>
> Bill
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Tim Ziegler
> *Sent:* Monday, 9 August 2021 12:27 AM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* Re: Dadoing drawer sides on the LOM1200
>
>
>
> Hey Bill
>
>
>
>  Yeah hard to believe all the bells on my WC right. I put a different
> router on it a bit ago too. I had to make a new router plate for it. Was
> Plexi and it just seemed to crack in about 50 PCs. I glued it back together
> to copy it as a pattern. Made one from the self healing white plastic.
> Slides super smooth now. I need to find another couple drive motors though
> because that's where I took the drive for my 1200.  Anyway nice unit.
> Raining this morning so might be a good day to play. Lol
>
>
>
>
>
> Tim
>
>
>
> On Sat, Aug 7, 2021, 10:35 PM  wrote:
>
> Yes my last goal is to own a legacy Z axis I know I can make one but I
> would like a legacy one too. And of course I always want your rotary cross
> slide yours is the only one I have ever seen.
>
> Bill
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Tim Ziegler
> *Sent:* Sunday, 8 August 2021 1:25 PM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* Re: Dadoing drawer sides on the LOM1200
>
>
>
> Sounds pretty awesome though.
>
> Guess I better start looking for more parts lol.
>
> Have a good night.
>
>
> Kind Regards,
>
>
>
> Timothy J. Ziegler
>
> Ziegler WoodWork & Specialty
>
> 14171 160th Ave.
>
> Foreston MN 56330
>
>
>
> 320-294-5798 shop
>
> 320-630-2243 cell
>
>
>
>
>
> On Sat, Aug 7, 2021 at 10:22 PM  wrote:
>
> Right, but you can slide both tailstocks all the way to either end to do
> really long work if necessary . I have even milled 2 separate operations
> and different pitches on the one piece at the same time for fun but it’s
> just too difficult to do to be practical and way to long to set up
>
>
>
> Bill
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Tim Ziegler
> *Sent:* Sunday, 8 August 2021 12:20 PM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* Re: Dadoing drawer sides on the LOM1200
>
>
>
> So Bill, you run with two tail stocks in the center and the headstocks on
> both ends then right?
>
> Kind Regards,
>
>
>
> Timothy J. Ziegler
>
> Ziegler WoodWork & Specialty
>
> 14171 160th Ave.
>
> Foreston MN 56330
>
>
>
> 320-294-5798 shop
>
> 320-630-2243 cell
>
>
>
>
>
> On Sat, Aug 7, 2021 at 7:53 AM  wrote:
>
> Yes that’s why I run 2 saddles, 2 headstocks, 2 tailstocks and 2
> leadscrews it gives me the option to have 2 separate jobs set up at the
> same time. Im just missing the z axis I really must make another.
>
> As for another split nut didn’t you buy the 5/8X4 acme tap on ebay like me
> and curt did?
>
> That way you can make your own.
>
>
>
> Bill
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Tim Ziegler
> *Sent:* Saturday, 7 August 2021 8:51 PM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* Re: Dadoing drawer sides on the LOM1200
>
>
>
> Hey Bill,
>
>
>
> Yeah I put my Z axis system back on to run more of the dado's and grooves
> that i do.
>
> and put it on the left that way I can still leave my plunge router over on
> the end where I
>
> tend to play at the moment. I like the plunge action much better for
> getting down into
>
> cut and back out. So much quicker. but the Z axis saddle has a
> prominent place in what
>
> I am doing when horizontal and vertical milling. Grooves and Dados etc...
>
> I do need to get another complete split nut system for the acme thread
> though. Currently
>
> I manually slide the Z axis Carriage/saddle.
>
> Kind Regards,
>
>
>
> Timothy J. Ziegler
>
> Ziegler WoodWork & Specialty
>
> 14171 160th Ave.
>
> Foreston MN 56330
>
>
>
> 320-294-5798 shop
>
> 320-630-2243 cell
>
>
>
>
>
> On Sat, Aug 7, 2021 at 1:37 AM  wrote:
>
> Not at all Tim all work on the mill is a big deal ,looks like your running
> 2 saddles on your mill what a good idea I wonder where you got that idea
> from?
>
> To a beginner this would be very interesting.
>
> Bill
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *
> timjz...@gmail.com
> *Sent:* Saturday, 7 August 2021 12:41 PM
> *To:* Legacy Ornamental Mills 
> *Subject:* Dadoing drawer sides on the LOM1200
>
>
>
> I have been doing a lot of dado's on my LOM 1200
>
> This has been working extremely well as you can see what your doing.
>
> Set up is as quick as the router table or faster and far easier 

RE: Dadoing drawer sides on the LOM1200

[bulkeley]

Here too they need to be 2 or 3 meg to be clear

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of M.W.Foscue
Sent: Monday, 9 August 2021 4:48 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Dadoing drawer sides on the LOM1200

 

Got ur 3 emails w/photos.

But they were the same as the first ones - postage stamp size.

The "sizes" of the 3 emails containing the images were:  71 kb, 71 kb, and 89 
kb. (that means they are VERY low resolution).   They still blurr out when I 
try to enlarge them.

Thanks for the attempt.

Mac

  _  

  _  

-Original Message-
From: mailto:legacy-ornamental-mills@googlegroups.com> >
Sent: Aug 8, 2021 2:30 PM
To: mailto:legacy-ornamental-mills@googlegroups.com> >
Subject: Re: Dadoing drawer sides on the LOM1200

 




Kind Regards, 

 

Timothy J. Ziegler

Ziegler WoodWork & Specialty

14171 160th Ave.

Foreston MN 56330

 

320-294-5798 shop

320-630-2243 cell

 

On Sun, Aug 8, 2021 at 1:08 PM M.W.Foscue mailto:mwfos...@earthlink.net> > wrote:

Tim,

Thanks - but - they arrived as postage stamp size images (VERY low resolution) 
and when I try to zoom in on them, they pixelate so badly you can't tell 
anything about what you then see.

Whenever you get the chance (next week or so), will you please send higher 
resolution photos?

Thanks again.

Mac


  _  


  _  


-Original Message-
From: mailto:legacy-ornamental-mills@googlegroups.com> >
Sent: Aug 8, 2021 12:10 PM
To: mailto:legacy-ornamental-mills@googlegroups.com> >
Subject: Re: Dadoing drawer sides on the LOM1200

 

Hey Mac, 

 

Here you go. 




Kind Regards, 

 

Timothy J. Ziegler

Ziegler WoodWork & Specialty

14171 160th Ave.

Foreston MN 56330

 

320-294-5798 shop

320-630-2243 cell

 

On Sun, Aug 8, 2021 at 1:35 AM M.W.Foscue mailto:mwfos...@earthlink.net> > wrote:

Bill,

"Rotary Cross Slide"?

Pics of one please.

Who owns one?

Mac


  _  


  _  


-Original Message-
From: mailto:legacy-ornamental-mills@googlegroups.com> >
Sent: Aug 7, 2021 11:35 PM
To: mailto:legacy-ornamental-mills@googlegroups.com> >
Subject: RE: Dadoing drawer sides on the LOM1200

 

Yes my last goal is to own a legacy Z axis I know I can make one but I would 
like a legacy one too. And of course I always want your rotary cross slide 
yours is the only one I have ever seen.

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
  
mailto:legacy-ornamental-mills@googlegroups.com> > On Behalf Of Tim Ziegler
Sent: Sunday, 8 August 2021 1:25 PM
To: legacy-ornamental-mills@googlegroups.com 
 
Subject: Re: Dadoing drawer sides on the LOM1200

 

Sounds pretty awesome though. 

Guess I better start looking for more parts lol. 

Have a good night. 

 

Kind Regards,

 

Timothy J. Ziegler

Ziegler WoodWork & Specialty

14171 160th Ave.

Foreston MN 56330

 

320-294-5798 shop

320-630-2243 cell

 

 

On Sat, Aug 7, 2021 at 10:22 PM mailto:bulke...@mmnet.com.au> > wrote:

Right, but you can slide both tailstocks all the way to either end to do really 
long work if necessary . I have even milled 2 separate operations and different 
pitches on the one piece at the same time for fun but it’s just too difficult 
to do to be practical and way to long to set up 

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
  
mailto:legacy-ornamental-mills@googlegroups.com> > On Behalf Of Tim Ziegler
Sent: Sunday, 8 August 2021 12:20 PM
To: legacy-ornamental-mills@googlegroups.com 
 
Subject: Re: Dadoing drawer sides on the LOM1200

 

So Bill, you run with two tail stocks in the center and the headstocks on both 
ends then right?

Kind Regards,

 

Timothy J. Ziegler

Ziegler WoodWork & Specialty

14171 160th Ave.

Foreston MN 56330

 

320-294-5798 shop

320-630-2243 cell

 

 

On Sat, Aug 7, 2021 at 7:53 AM mailto:bulke...@mmnet.com.au> > wrote:

Yes that’s why I run 2 saddles, 2 headstocks, 2 tailstocks and 2 leadscrews it 
gives me the option to have 2 separate jobs set up at the same time. Im just 
missing the z axis I really must make another.

As for another split nut didn’t you buy the 5/8X4 acme tap on ebay like me and 
curt did?

That way you can make your own.

 

Bill 

 

From: legacy-ornamental-mills@googlegroups.com 
  
mailto:legacy-ornamental-mills@googlegroups.com> > On Behalf Of Tim Ziegler
Sent: Saturday, 7 August 2021 8:51 PM
To: legacy-ornamental-mills@googlegroups.com 
 
Subject: Re: Dadoing drawer sides on the LOM1200

 

Hey Bill,

 

Yeah I put my Z axis system back on to run more of the dado's and grooves that 
i do.

and put it on the left that way I can still leave my plunge router over on the 
end where I 

tend to play at the moment. I like 

RE: Dadoing drawer sides on the LOM1200

[bulkeley]

Tim can you take better pics they are a bit small to see anything properly 

If they are too big to post email them to me and I will fix them and post them 
to the group

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of Tim Ziegler
Sent: Monday, 9 August 2021 2:11 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Dadoing drawer sides on the LOM1200

 

Hey Mac,

 

Here you go. 




Kind Regards,

 

Timothy J. Ziegler

Ziegler WoodWork & Specialty

14171 160th Ave.

Foreston MN 56330

 

320-294-5798 shop

320-630-2243 cell

 

 

On Sun, Aug 8, 2021 at 1:35 AM M.W.Foscue mailto:mwfos...@earthlink.net> > wrote:

Bill,

"Rotary Cross Slide"?

Pics of one please.

Who owns one?

Mac


  _  


  _  


-Original Message-
From: mailto:legacy-ornamental-mills@googlegroups.com> >
Sent: Aug 7, 2021 11:35 PM
To: mailto:legacy-ornamental-mills@googlegroups.com> >
Subject: RE: Dadoing drawer sides on the LOM1200

 

Yes my last goal is to own a legacy Z axis I know I can make one but I would 
like a legacy one too. And of course I always want your rotary cross slide 
yours is the only one I have ever seen.

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
  
mailto:legacy-ornamental-mills@googlegroups.com> > On Behalf Of Tim Ziegler
Sent: Sunday, 8 August 2021 1:25 PM
To: legacy-ornamental-mills@googlegroups.com 
 
Subject: Re: Dadoing drawer sides on the LOM1200

 

Sounds pretty awesome though. 

Guess I better start looking for more parts lol. 

Have a good night. 

 

Kind Regards,

 

Timothy J. Ziegler

Ziegler WoodWork & Specialty

14171 160th Ave.

Foreston MN 56330

 

320-294-5798 shop

320-630-2243 cell

 

 

On Sat, Aug 7, 2021 at 10:22 PM mailto:bulke...@mmnet.com.au> > wrote:

Right, but you can slide both tailstocks all the way to either end to do really 
long work if necessary . I have even milled 2 separate operations and different 
pitches on the one piece at the same time for fun but it’s just too difficult 
to do to be practical and way to long to set up 

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
  
mailto:legacy-ornamental-mills@googlegroups.com> > On Behalf Of Tim Ziegler
Sent: Sunday, 8 August 2021 12:20 PM
To: legacy-ornamental-mills@googlegroups.com 
 
Subject: Re: Dadoing drawer sides on the LOM1200

 

So Bill, you run with two tail stocks in the center and the headstocks on both 
ends then right?

Kind Regards,

 

Timothy J. Ziegler

Ziegler WoodWork & Specialty

14171 160th Ave.

Foreston MN 56330

 

320-294-5798 shop

320-630-2243 cell

 

 

On Sat, Aug 7, 2021 at 7:53 AM mailto:bulke...@mmnet.com.au> > wrote:

Yes that’s why I run 2 saddles, 2 headstocks, 2 tailstocks and 2 leadscrews it 
gives me the option to have 2 separate jobs set up at the same time. Im just 
missing the z axis I really must make another.

As for another split nut didn’t you buy the 5/8X4 acme tap on ebay like me and 
curt did?

That way you can make your own.

 

Bill 

 

From: legacy-ornamental-mills@googlegroups.com 
  
mailto:legacy-ornamental-mills@googlegroups.com> > On Behalf Of Tim Ziegler
Sent: Saturday, 7 August 2021 8:51 PM
To: legacy-ornamental-mills@googlegroups.com 
 
Subject: Re: Dadoing drawer sides on the LOM1200

 

Hey Bill,

 

Yeah I put my Z axis system back on to run more of the dado's and grooves that 
i do.

and put it on the left that way I can still leave my plunge router over on the 
end where I 

tend to play at the moment. I like the plunge action much better for getting 
down into

cut and back out. So much quicker. but the Z axis saddle has a prominent place 
in what 

I am doing when horizontal and vertical milling. Grooves and Dados etc...

I do need to get another complete split nut system for the acme thread though. 
Currently 

I manually slide the Z axis Carriage/saddle. 

Kind Regards,

 

Timothy J. Ziegler

Ziegler WoodWork & Specialty

14171 160th Ave.

Foreston MN 56330

 

320-294-5798 shop

320-630-2243 cell

 

 

On Sat, Aug 7, 2021 at 1:37 AM mailto:bulke...@mmnet.com.au> > wrote:

Not at all Tim all work on the mill is a big deal ,looks like your running 2 
saddles on your mill what a good idea I wonder where you got that idea from?

To a beginner this would be very interesting.

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
  
mailto:legacy-ornamental-mills@googlegroups.com> > On Behalf Of 
timjz...@gmail.com  
Sent: Saturday, 7 August 2021 12:41 PM
To: Legacy Ornamental Mills mailto:legacy-ornamental-mills@googlegroups.com> >
Subject: Dadoing drawer sides on the LOM1200

 

I have been doing a lot of 

RE: Dadoing drawer sides on the LOM1200

[bulkeley]

Any time is a good time to play when a legacy is involved 

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of Tim Ziegler
Sent: Monday, 9 August 2021 12:27 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Dadoing drawer sides on the LOM1200

 

Hey Bill

 

 Yeah hard to believe all the bells on my WC right. I put a different router on 
it a bit ago too. I had to make a new router plate for it. Was Plexi and it 
just seemed to crack in about 50 PCs. I glued it back together to copy it as a 
pattern. Made one from the self healing white plastic. Slides super smooth now. 
I need to find another couple drive motors though because that's where I took 
the drive for my 1200.  Anyway nice unit. Raining this morning so might be a 
good day to play. Lol

 

 

Tim

 

On Sat, Aug 7, 2021, 10:35 PM mailto:bulke...@mmnet.com.au> > wrote:

Yes my last goal is to own a legacy Z axis I know I can make one but I would 
like a legacy one too. And of course I always want your rotary cross slide 
yours is the only one I have ever seen.

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
  
mailto:legacy-ornamental-mills@googlegroups.com> > On Behalf Of Tim Ziegler
Sent: Sunday, 8 August 2021 1:25 PM
To: legacy-ornamental-mills@googlegroups.com 
 
Subject: Re: Dadoing drawer sides on the LOM1200

 

Sounds pretty awesome though. 

Guess I better start looking for more parts lol. 

Have a good night. 




Kind Regards,

 

Timothy J. Ziegler

Ziegler WoodWork & Specialty

14171 160th Ave.

Foreston MN 56330

 

320-294-5798 shop

320-630-2243 cell

 

 

On Sat, Aug 7, 2021 at 10:22 PM mailto:bulke...@mmnet.com.au> > wrote:

Right, but you can slide both tailstocks all the way to either end to do really 
long work if necessary . I have even milled 2 separate operations and different 
pitches on the one piece at the same time for fun but it’s just too difficult 
to do to be practical and way to long to set up 

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
  
mailto:legacy-ornamental-mills@googlegroups.com> > On Behalf Of Tim Ziegler
Sent: Sunday, 8 August 2021 12:20 PM
To: legacy-ornamental-mills@googlegroups.com 
 
Subject: Re: Dadoing drawer sides on the LOM1200

 

So Bill, you run with two tail stocks in the center and the headstocks on both 
ends then right?


Kind Regards,

 

Timothy J. Ziegler

Ziegler WoodWork & Specialty

14171 160th Ave.

Foreston MN 56330

 

320-294-5798 shop

320-630-2243 cell

 

 

On Sat, Aug 7, 2021 at 7:53 AM mailto:bulke...@mmnet.com.au> > wrote:

Yes that’s why I run 2 saddles, 2 headstocks, 2 tailstocks and 2 leadscrews it 
gives me the option to have 2 separate jobs set up at the same time. Im just 
missing the z axis I really must make another.

As for another split nut didn’t you buy the 5/8X4 acme tap on ebay like me and 
curt did?

That way you can make your own.

 

Bill 

 

From: legacy-ornamental-mills@googlegroups.com 
  
mailto:legacy-ornamental-mills@googlegroups.com> > On Behalf Of Tim Ziegler
Sent: Saturday, 7 August 2021 8:51 PM
To: legacy-ornamental-mills@googlegroups.com 
 
Subject: Re: Dadoing drawer sides on the LOM1200

 

Hey Bill,

 

Yeah I put my Z axis system back on to run more of the dado's and grooves that 
i do.

and put it on the left that way I can still leave my plunge router over on the 
end where I 

tend to play at the moment. I like the plunge action much better for getting 
down into

cut and back out. So much quicker. but the Z axis saddle has a prominent place 
in what 

I am doing when horizontal and vertical milling. Grooves and Dados etc...

I do need to get another complete split nut system for the acme thread though. 
Currently 

I manually slide the Z axis Carriage/saddle. 


Kind Regards,

 

Timothy J. Ziegler

Ziegler WoodWork & Specialty

14171 160th Ave.

Foreston MN 56330

 

320-294-5798 shop

320-630-2243 cell

 

 

On Sat, Aug 7, 2021 at 1:37 AM mailto:bulke...@mmnet.com.au> > wrote:

Not at all Tim all work on the mill is a big deal ,looks like your running 2 
saddles on your mill what a good idea I wonder where you got that idea from?

To a beginner this would be very interesting.

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
  
mailto:legacy-ornamental-mills@googlegroups.com> > On Behalf Of 
timjz...@gmail.com  
Sent: Saturday, 7 August 2021 12:41 PM
To: Legacy Ornamental Mills mailto:legacy-ornamental-mills@googlegroups.com> >
Subject: Dadoing drawer sides on the LOM1200

 

I have been doing a lot of dado's on my LOM 1200

This has been working extremely well as you can see what your doing.

Set 

Re: Dadoing drawer sides on the LOM1200

[M.W.Foscue]

Got ur 3 emails w/photos.
But they were the same as the first ones - postage stamp size.
The "sizes" of the 3 emails containing the images were:  71 kb, 71 kb, and 89 
kb. (that means they are VERY low resolution).   They still blurr out when I 
try to enlarge them.
Thanks for the attempt.
Mac
-Original Message-
From: 
Sent: Aug 8, 2021 2:30 PM
To: 
Subject: Re: Dadoing drawer sides on the LOM1200

Kind Regards, 
Timothy J. Ziegler
Ziegler WoodWork  Specialty
14171 160th Ave.
Foreston MN 56330
 
320-294-5798 shop
320-630-2243 cell





On Sun, Aug 8, 2021 at 1:08 PM M.W.Foscue  wrote:
Tim,
Thanks - but - they arrived as postage stamp size images (VERY low resolution) 
and when I try to zoom in on them, they pixelate so badly you can't tell 
anything about what you then see.
Whenever you get the chance (next week or so), will you please send higher 
resolution photos?
Thanks again.
Mac

-Original Message-
From: 
Sent: Aug 8, 2021 12:10 PM
To: 
Subject: Re: Dadoing drawer sides on the LOM1200

Hey Mac, 
Here you go. 
Kind Regards, 
Timothy J. Ziegler
Ziegler WoodWork  Specialty
14171 160th Ave.
Foreston MN 56330
 
320-294-5798 shop
320-630-2243 cell






On Sun, Aug 8, 2021 at 1:35 AM M.W.Foscue  wrote:
Bill,
"Rotary Cross Slide"?
Pics of one please.
Who owns one?
Mac

-Original Message-
From: 
Sent: Aug 7, 2021 11:35 PM
To: 
Subject: RE: Dadoing drawer sides on the LOM1200

Yes my last goal is to own a legacy Z axis I know I can make one but I would 
like a legacy one too. And of course I always want your rotary cross slide 
yours is the only one I have ever seen.
Bill
 
From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of Tim Ziegler
Sent: Sunday, 8 August 2021 1:25 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Dadoing drawer sides on the LOM1200


Sounds pretty awesome though. 
Guess I better start looking for more parts lol. 

Have a good night. 


Kind Regards,


Timothy J. Ziegler

Ziegler WoodWork  Specialty

14171 160th Ave.

Foreston MN 56330



320-294-5798 shop

320-630-2243 cell








On Sat, Aug 7, 2021 at 10:22 PM  wrote:

Right, but you can slide both tailstocks all the way to either end to do really 
long work if necessary . I have even milled 2 separate operations and different 
pitches on the one piece at the same time for fun but its just too 
difficult to do to be practical and way to long to set up 
 
Bill
 
From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of Tim Ziegler
Sent: Sunday, 8 August 2021 12:20 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Dadoing drawer sides on the LOM1200


So Bill, you run with two tail stocks in the center and the headstocks on both 
ends then right?
Kind Regards,


Timothy J. Ziegler

Ziegler WoodWork  Specialty

14171 160th Ave.

Foreston MN 56330



320-294-5798 shop

320-630-2243 cell







On Sat, Aug 7, 2021 at 7:53 AM  wrote:

Yes thats why I run 2 saddles, 2 headstocks, 2 tailstocks and 2 
leadscrews it gives me the option to have 2 separate jobs set up at the same 
time. Im just missing the z axis I really must make another.
As for another split nut didnt you buy the 5/8X4 acme tap on ebay like 
me and curt did?
That way you can make your own.
 
Bill 
 
From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of Tim Ziegler
Sent: Saturday, 7 August 2021 8:51 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Dadoing drawer sides on the LOM1200


Hey Bill,


Yeah I put my Z axis system back on to run more of the dado's and grooves that 
i do.

and put it on the left that way I can still leave my plunge router over on the 
end where I 

tend to play at the moment. I like the plunge action much better for getting 
down into

cut and back out. So much quicker. but the Z axis saddle has a prominent place 
in what 

I am doing when horizontal and vertical milling. Grooves and Dados etc...

I do need to get another complete split nut system for the acme thread though. 
Currently 

I manually slide the Z axis Carriage/saddle. 
Kind Regards,


Timothy J. Ziegler

Ziegler WoodWork  Specialty

14171 160th Ave.

Foreston MN 56330



320-294-5798 shop

320-630-2243 cell








On Sat, Aug 7, 2021 at 1:37 AM  wrote:

Not at all Tim all work on the mill is a big deal ,looks like your running 2 
saddles on your mill what a good idea I wonder where you got that idea from?
To a beginner this would be very interesting.
Bill
 
From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of timjz...@gmail.com
Sent: Saturday, 7 August 2021 12:41 PM
To: Legacy Ornamental Mills 
Subject: Dadoing drawer sides on the LOM1200


I have been doing a lot of dado's on my LOM 1200
This has been working extremely well as you can see what your doing.

Set up is as quick as the router table or faster and far easier to see. 

I'd assume no big deal to most but this machine has to own up to the 

space it uses in my shop.

I have done many 1/4 dados and several 3/4 X 1/4 deep for cabinet work. 

Re: Dadoing drawer sides on the LOM1200

[Tim Ziegler]

Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Sun, Aug 8, 2021 at 1:08 PM M.W.Foscue  wrote:

> Tim,
>
> Thanks - but - they arrived as postage stamp size images (VERY low
> resolution) and when I try to zoom in on them, they pixelate so badly you
> can't tell anything about what you then see.
>
> Whenever you get the chance (next week or so), will you please send higher
> resolution photos?
>
> Thanks again.
>
> Mac
> --
> --
>
> -Original Message-
> From: 
> Sent: Aug 8, 2021 12:10 PM
> To: 
> Subject: Re: Dadoing drawer sides on the LOM1200
>
> Hey Mac,
>
> Here you go.
>
> Kind Regards,
>
> Timothy J. Ziegler
> Ziegler WoodWork & Specialty
> 14171 160th Ave.
> Foreston MN 56330
>
> 320-294-5798 shop
> 320-630-2243 cell
>
> On Sun, Aug 8, 2021 at 1:35 AM M.W.Foscue  wrote:
>
>> Bill,
>>
>> "Rotary Cross Slide"?
>>
>> Pics of one please.
>>
>> Who owns one?
>>
>> Mac
>> --
>> --
>>
>> -Original Message-
>> From: 
>> Sent: Aug 7, 2021 11:35 PM
>> To: 
>> Subject: RE: Dadoing drawer sides on the LOM1200
>>
>> Yes my last goal is to own a legacy Z axis I know I can make one but I
>> would like a legacy one too. And of course I always want your rotary cross
>> slide yours is the only one I have ever seen.
>>
>> Bill
>>
>>
>>
>> *From:* legacy-ornamental-mills@googlegroups.com <
>> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Tim Ziegler
>> *Sent:* Sunday, 8 August 2021 1:25 PM
>> *To:* legacy-ornamental-mills@googlegroups.com
>> *Subject:* Re: Dadoing drawer sides on the LOM1200
>>
>>
>>
>> Sounds pretty awesome though.
>>
>> Guess I better start looking for more parts lol.
>>
>> Have a good night.
>>
>>
>>
>> Kind Regards,
>>
>>
>>
>> Timothy J. Ziegler
>>
>> Ziegler WoodWork & Specialty
>>
>> 14171 160th Ave.
>>
>> Foreston MN 56330
>>
>>
>>
>> 320-294-5798 shop
>>
>> 320-630-2243 cell
>>
>>
>>
>>
>>
>> On Sat, Aug 7, 2021 at 10:22 PM  wrote:
>>
>> Right, but you can slide both tailstocks all the way to either end to do
>> really long work if necessary . I have even milled 2 separate operations
>> and different pitches on the one piece at the same time for fun but it’s
>> just too difficult to do to be practical and way to long to set up
>>
>>
>>
>> Bill
>>
>>
>>
>> *From:* legacy-ornamental-mills@googlegroups.com <
>> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Tim Ziegler
>> *Sent:* Sunday, 8 August 2021 12:20 PM
>> *To:* legacy-ornamental-mills@googlegroups.com
>> *Subject:* Re: Dadoing drawer sides on the LOM1200
>>
>>
>>
>> So Bill, you run with two tail stocks in the center and the headstocks on
>> both ends then right?
>>
>> Kind Regards,
>>
>>
>>
>> Timothy J. Ziegler
>>
>> Ziegler WoodWork & Specialty
>>
>> 14171 160th Ave.
>>
>> Foreston MN 56330
>>
>>
>>
>> 320-294-5798 shop
>>
>> 320-630-2243 cell
>>
>>
>>
>>
>>
>> On Sat, Aug 7, 2021 at 7:53 AM  wrote:
>>
>> Yes that’s why I run 2 saddles, 2 headstocks, 2 tailstocks and 2
>> leadscrews it gives me the option to have 2 separate jobs set up at the
>> same time. Im just missing the z axis I really must make another.
>>
>> As for another split nut didn’t you buy the 5/8X4 acme tap on ebay like
>> me and curt did?
>>
>> That way you can make your own.
>>
>>
>>
>> Bill
>>
>>
>>
>> *From:* legacy-ornamental-mills@googlegroups.com <
>> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Tim Ziegler
>> *Sent:* Saturday, 7 August 2021 8:51 PM
>> *To:* legacy-ornamental-mills@googlegroups.com
>> *Subject:* Re: Dadoing drawer sides on the LOM1200
>>
>>
>>
>> Hey Bill,
>>
>>
>>
>> Yeah I put my Z axis system back on to run more of the dado's and grooves
>> that i do.
>>
>> and put it on the left that way I can still leave my plunge router over
>> on the end where I
>>
>> tend to play at the moment. I like the plunge action much better for
>> getting down into
>>
>> cut and back out. So much quicker. but the Z axis saddle has a
>> prominent place in what
>>
>> I am doing when horizontal and vertical milling. Grooves and Dados etc...
>>
>> I do need to get another complete split nut system for the acme thread
>> though. Currently
>>
>> I manually slide the Z axis Carriage/saddle.
>>
>> Kind Regards,
>>
>>
>>
>> Timothy J. Ziegler
>>
>> Ziegler WoodWork & Specialty
>>
>> 14171 160th Ave.
>>
>> Foreston MN 56330
>>
>>
>>
>> 320-294-5798 shop
>>
>> 320-630-2243 cell
>>
>>
>>
>>
>>
>> On Sat, Aug 7, 2021 at 1:37 AM  wrote:
>>
>> Not at all Tim all work on the mill is a big deal ,looks like your
>> running 2 saddles on your mill what a good idea I wonder where you got that
>> idea from?
>>
>> To a beginner this would be very interesting.
>>
>> Bill
>>
>>
>>
>> *From:* legacy-ornamental-mills@googlegroups.com <
>> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *
>> timjz...@gmail.com
>> *Sent:* Saturday, 7 

Re: Dadoing drawer sides on the LOM1200

[Tim Ziegler]

Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Sun, Aug 8, 2021 at 1:08 PM M.W.Foscue  wrote:

> Tim,
>
> Thanks - but - they arrived as postage stamp size images (VERY low
> resolution) and when I try to zoom in on them, they pixelate so badly you
> can't tell anything about what you then see.
>
> Whenever you get the chance (next week or so), will you please send higher
> resolution photos?
>
> Thanks again.
>
> Mac
> --
> --
>
> -Original Message-
> From: 
> Sent: Aug 8, 2021 12:10 PM
> To: 
> Subject: Re: Dadoing drawer sides on the LOM1200
>
> Hey Mac,
>
> Here you go.
>
> Kind Regards,
>
> Timothy J. Ziegler
> Ziegler WoodWork & Specialty
> 14171 160th Ave.
> Foreston MN 56330
>
> 320-294-5798 shop
> 320-630-2243 cell
>
> On Sun, Aug 8, 2021 at 1:35 AM M.W.Foscue  wrote:
>
>> Bill,
>>
>> "Rotary Cross Slide"?
>>
>> Pics of one please.
>>
>> Who owns one?
>>
>> Mac
>> --
>> --
>>
>> -Original Message-
>> From: 
>> Sent: Aug 7, 2021 11:35 PM
>> To: 
>> Subject: RE: Dadoing drawer sides on the LOM1200
>>
>> Yes my last goal is to own a legacy Z axis I know I can make one but I
>> would like a legacy one too. And of course I always want your rotary cross
>> slide yours is the only one I have ever seen.
>>
>> Bill
>>
>>
>>
>> *From:* legacy-ornamental-mills@googlegroups.com <
>> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Tim Ziegler
>> *Sent:* Sunday, 8 August 2021 1:25 PM
>> *To:* legacy-ornamental-mills@googlegroups.com
>> *Subject:* Re: Dadoing drawer sides on the LOM1200
>>
>>
>>
>> Sounds pretty awesome though.
>>
>> Guess I better start looking for more parts lol.
>>
>> Have a good night.
>>
>>
>>
>> Kind Regards,
>>
>>
>>
>> Timothy J. Ziegler
>>
>> Ziegler WoodWork & Specialty
>>
>> 14171 160th Ave.
>>
>> Foreston MN 56330
>>
>>
>>
>> 320-294-5798 shop
>>
>> 320-630-2243 cell
>>
>>
>>
>>
>>
>> On Sat, Aug 7, 2021 at 10:22 PM  wrote:
>>
>> Right, but you can slide both tailstocks all the way to either end to do
>> really long work if necessary . I have even milled 2 separate operations
>> and different pitches on the one piece at the same time for fun but it’s
>> just too difficult to do to be practical and way to long to set up
>>
>>
>>
>> Bill
>>
>>
>>
>> *From:* legacy-ornamental-mills@googlegroups.com <
>> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Tim Ziegler
>> *Sent:* Sunday, 8 August 2021 12:20 PM
>> *To:* legacy-ornamental-mills@googlegroups.com
>> *Subject:* Re: Dadoing drawer sides on the LOM1200
>>
>>
>>
>> So Bill, you run with two tail stocks in the center and the headstocks on
>> both ends then right?
>>
>> Kind Regards,
>>
>>
>>
>> Timothy J. Ziegler
>>
>> Ziegler WoodWork & Specialty
>>
>> 14171 160th Ave.
>>
>> Foreston MN 56330
>>
>>
>>
>> 320-294-5798 shop
>>
>> 320-630-2243 cell
>>
>>
>>
>>
>>
>> On Sat, Aug 7, 2021 at 7:53 AM  wrote:
>>
>> Yes that’s why I run 2 saddles, 2 headstocks, 2 tailstocks and 2
>> leadscrews it gives me the option to have 2 separate jobs set up at the
>> same time. Im just missing the z axis I really must make another.
>>
>> As for another split nut didn’t you buy the 5/8X4 acme tap on ebay like
>> me and curt did?
>>
>> That way you can make your own.
>>
>>
>>
>> Bill
>>
>>
>>
>> *From:* legacy-ornamental-mills@googlegroups.com <
>> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Tim Ziegler
>> *Sent:* Saturday, 7 August 2021 8:51 PM
>> *To:* legacy-ornamental-mills@googlegroups.com
>> *Subject:* Re: Dadoing drawer sides on the LOM1200
>>
>>
>>
>> Hey Bill,
>>
>>
>>
>> Yeah I put my Z axis system back on to run more of the dado's and grooves
>> that i do.
>>
>> and put it on the left that way I can still leave my plunge router over
>> on the end where I
>>
>> tend to play at the moment. I like the plunge action much better for
>> getting down into
>>
>> cut and back out. So much quicker. but the Z axis saddle has a
>> prominent place in what
>>
>> I am doing when horizontal and vertical milling. Grooves and Dados etc...
>>
>> I do need to get another complete split nut system for the acme thread
>> though. Currently
>>
>> I manually slide the Z axis Carriage/saddle.
>>
>> Kind Regards,
>>
>>
>>
>> Timothy J. Ziegler
>>
>> Ziegler WoodWork & Specialty
>>
>> 14171 160th Ave.
>>
>> Foreston MN 56330
>>
>>
>>
>> 320-294-5798 shop
>>
>> 320-630-2243 cell
>>
>>
>>
>>
>>
>> On Sat, Aug 7, 2021 at 1:37 AM  wrote:
>>
>> Not at all Tim all work on the mill is a big deal ,looks like your
>> running 2 saddles on your mill what a good idea I wonder where you got that
>> idea from?
>>
>> To a beginner this would be very interesting.
>>
>> Bill
>>
>>
>>
>> *From:* legacy-ornamental-mills@googlegroups.com <
>> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *
>> timjz...@gmail.com
>> *Sent:* Saturday, 7 

Re: Dadoing drawer sides on the LOM1200

[Tim Ziegler]

Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Sun, Aug 8, 2021 at 1:08 PM M.W.Foscue  wrote:

> Tim,
>
> Thanks - but - they arrived as postage stamp size images (VERY low
> resolution) and when I try to zoom in on them, they pixelate so badly you
> can't tell anything about what you then see.
>
> Whenever you get the chance (next week or so), will you please send higher
> resolution photos?
>
> Thanks again.
>
> Mac
> --
> --
>
> -Original Message-
> From: 
> Sent: Aug 8, 2021 12:10 PM
> To: 
> Subject: Re: Dadoing drawer sides on the LOM1200
>
> Hey Mac,
>
> Here you go.
>
> Kind Regards,
>
> Timothy J. Ziegler
> Ziegler WoodWork & Specialty
> 14171 160th Ave.
> Foreston MN 56330
>
> 320-294-5798 shop
> 320-630-2243 cell
>
> On Sun, Aug 8, 2021 at 1:35 AM M.W.Foscue  wrote:
>
>> Bill,
>>
>> "Rotary Cross Slide"?
>>
>> Pics of one please.
>>
>> Who owns one?
>>
>> Mac
>> --
>> --
>>
>> -Original Message-
>> From: 
>> Sent: Aug 7, 2021 11:35 PM
>> To: 
>> Subject: RE: Dadoing drawer sides on the LOM1200
>>
>> Yes my last goal is to own a legacy Z axis I know I can make one but I
>> would like a legacy one too. And of course I always want your rotary cross
>> slide yours is the only one I have ever seen.
>>
>> Bill
>>
>>
>>
>> *From:* legacy-ornamental-mills@googlegroups.com <
>> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Tim Ziegler
>> *Sent:* Sunday, 8 August 2021 1:25 PM
>> *To:* legacy-ornamental-mills@googlegroups.com
>> *Subject:* Re: Dadoing drawer sides on the LOM1200
>>
>>
>>
>> Sounds pretty awesome though.
>>
>> Guess I better start looking for more parts lol.
>>
>> Have a good night.
>>
>>
>>
>> Kind Regards,
>>
>>
>>
>> Timothy J. Ziegler
>>
>> Ziegler WoodWork & Specialty
>>
>> 14171 160th Ave.
>>
>> Foreston MN 56330
>>
>>
>>
>> 320-294-5798 shop
>>
>> 320-630-2243 cell
>>
>>
>>
>>
>>
>> On Sat, Aug 7, 2021 at 10:22 PM  wrote:
>>
>> Right, but you can slide both tailstocks all the way to either end to do
>> really long work if necessary . I have even milled 2 separate operations
>> and different pitches on the one piece at the same time for fun but it’s
>> just too difficult to do to be practical and way to long to set up
>>
>>
>>
>> Bill
>>
>>
>>
>> *From:* legacy-ornamental-mills@googlegroups.com <
>> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Tim Ziegler
>> *Sent:* Sunday, 8 August 2021 12:20 PM
>> *To:* legacy-ornamental-mills@googlegroups.com
>> *Subject:* Re: Dadoing drawer sides on the LOM1200
>>
>>
>>
>> So Bill, you run with two tail stocks in the center and the headstocks on
>> both ends then right?
>>
>> Kind Regards,
>>
>>
>>
>> Timothy J. Ziegler
>>
>> Ziegler WoodWork & Specialty
>>
>> 14171 160th Ave.
>>
>> Foreston MN 56330
>>
>>
>>
>> 320-294-5798 shop
>>
>> 320-630-2243 cell
>>
>>
>>
>>
>>
>> On Sat, Aug 7, 2021 at 7:53 AM  wrote:
>>
>> Yes that’s why I run 2 saddles, 2 headstocks, 2 tailstocks and 2
>> leadscrews it gives me the option to have 2 separate jobs set up at the
>> same time. Im just missing the z axis I really must make another.
>>
>> As for another split nut didn’t you buy the 5/8X4 acme tap on ebay like
>> me and curt did?
>>
>> That way you can make your own.
>>
>>
>>
>> Bill
>>
>>
>>
>> *From:* legacy-ornamental-mills@googlegroups.com <
>> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Tim Ziegler
>> *Sent:* Saturday, 7 August 2021 8:51 PM
>> *To:* legacy-ornamental-mills@googlegroups.com
>> *Subject:* Re: Dadoing drawer sides on the LOM1200
>>
>>
>>
>> Hey Bill,
>>
>>
>>
>> Yeah I put my Z axis system back on to run more of the dado's and grooves
>> that i do.
>>
>> and put it on the left that way I can still leave my plunge router over
>> on the end where I
>>
>> tend to play at the moment. I like the plunge action much better for
>> getting down into
>>
>> cut and back out. So much quicker. but the Z axis saddle has a
>> prominent place in what
>>
>> I am doing when horizontal and vertical milling. Grooves and Dados etc...
>>
>> I do need to get another complete split nut system for the acme thread
>> though. Currently
>>
>> I manually slide the Z axis Carriage/saddle.
>>
>> Kind Regards,
>>
>>
>>
>> Timothy J. Ziegler
>>
>> Ziegler WoodWork & Specialty
>>
>> 14171 160th Ave.
>>
>> Foreston MN 56330
>>
>>
>>
>> 320-294-5798 shop
>>
>> 320-630-2243 cell
>>
>>
>>
>>
>>
>> On Sat, Aug 7, 2021 at 1:37 AM  wrote:
>>
>> Not at all Tim all work on the mill is a big deal ,looks like your
>> running 2 saddles on your mill what a good idea I wonder where you got that
>> idea from?
>>
>> To a beginner this would be very interesting.
>>
>> Bill
>>
>>
>>
>> *From:* legacy-ornamental-mills@googlegroups.com <
>> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *
>> timjz...@gmail.com
>> *Sent:* Saturday, 7 

Re: Dadoing drawer sides on the LOM1200

[M.W.Foscue]

Tim,
Thanks - but - they arrived as postage stamp size images (VERY low resolution) 
and when I try to zoom in on them, they pixelate so badly you can't tell 
anything about what you then see.
Whenever you get the chance (next week or so), will you please send higher 
resolution photos?
Thanks again.
Mac
-Original Message-
From: 
Sent: Aug 8, 2021 12:10 PM
To: 
Subject: Re: Dadoing drawer sides on the LOM1200

Hey Mac, 
Here you go. 
Kind Regards, 
Timothy J. Ziegler
Ziegler WoodWork  Specialty
14171 160th Ave.
Foreston MN 56330
 
320-294-5798 shop
320-630-2243 cell






On Sun, Aug 8, 2021 at 1:35 AM M.W.Foscue  wrote:
Bill,
"Rotary Cross Slide"?
Pics of one please.
Who owns one?
Mac

-Original Message-
From: 
Sent: Aug 7, 2021 11:35 PM
To: 
Subject: RE: Dadoing drawer sides on the LOM1200

Yes my last goal is to own a legacy Z axis I know I can make one but I would 
like a legacy one too. And of course I always want your rotary cross slide 
yours is the only one I have ever seen.
Bill
 
From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of Tim Ziegler
Sent: Sunday, 8 August 2021 1:25 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Dadoing drawer sides on the LOM1200


Sounds pretty awesome though. 
Guess I better start looking for more parts lol. 

Have a good night. 


Kind Regards,


Timothy J. Ziegler

Ziegler WoodWork  Specialty

14171 160th Ave.

Foreston MN 56330



320-294-5798 shop

320-630-2243 cell








On Sat, Aug 7, 2021 at 10:22 PM  wrote:

Right, but you can slide both tailstocks all the way to either end to do really 
long work if necessary . I have even milled 2 separate operations and different 
pitches on the one piece at the same time for fun but its just too 
difficult to do to be practical and way to long to set up 
 
Bill
 
From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of Tim Ziegler
Sent: Sunday, 8 August 2021 12:20 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Dadoing drawer sides on the LOM1200


So Bill, you run with two tail stocks in the center and the headstocks on both 
ends then right?
Kind Regards,


Timothy J. Ziegler

Ziegler WoodWork  Specialty

14171 160th Ave.

Foreston MN 56330



320-294-5798 shop

320-630-2243 cell







On Sat, Aug 7, 2021 at 7:53 AM  wrote:

Yes thats why I run 2 saddles, 2 headstocks, 2 tailstocks and 2 
leadscrews it gives me the option to have 2 separate jobs set up at the same 
time. Im just missing the z axis I really must make another.
As for another split nut didnt you buy the 5/8X4 acme tap on ebay like 
me and curt did?
That way you can make your own.
 
Bill 
 
From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of Tim Ziegler
Sent: Saturday, 7 August 2021 8:51 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Dadoing drawer sides on the LOM1200


Hey Bill,


Yeah I put my Z axis system back on to run more of the dado's and grooves that 
i do.

and put it on the left that way I can still leave my plunge router over on the 
end where I 

tend to play at the moment. I like the plunge action much better for getting 
down into

cut and back out. So much quicker. but the Z axis saddle has a prominent place 
in what 

I am doing when horizontal and vertical milling. Grooves and Dados etc...

I do need to get another complete split nut system for the acme thread though. 
Currently 

I manually slide the Z axis Carriage/saddle. 
Kind Regards,


Timothy J. Ziegler

Ziegler WoodWork  Specialty

14171 160th Ave.

Foreston MN 56330



320-294-5798 shop

320-630-2243 cell








On Sat, Aug 7, 2021 at 1:37 AM  wrote:

Not at all Tim all work on the mill is a big deal ,looks like your running 2 
saddles on your mill what a good idea I wonder where you got that idea from?
To a beginner this would be very interesting.
Bill
 
From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of timjz...@gmail.com
Sent: Saturday, 7 August 2021 12:41 PM
To: Legacy Ornamental Mills 
Subject: Dadoing drawer sides on the LOM1200


I have been doing a lot of dado's on my LOM 1200
This has been working extremely well as you can see what your doing.

Set up is as quick as the router table or faster and far easier to see. 

I'd assume no big deal to most but this machine has to own up to the 

space it uses in my shop.

I have done many 1/4 dados and several 3/4 X 1/4 deep for cabinet work. 

Here I used the Horizontal vise other times I have a piece of MDF that I mount 

on the rails just for dado's





Kind regards,



Tim J. Ziegler

Ziegler WoodWork  Specialty

14171 160th Ave. 

Foreston MN 56330



320-294-5798 shop

320-630-2243 cell

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 

Re: Dadoing drawer sides on the LOM1200

[Tim Ziegler]

Hey Mac,

Here you go.

Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Sun, Aug 8, 2021 at 1:35 AM M.W.Foscue  wrote:

> Bill,
>
> "Rotary Cross Slide"?
>
> Pics of one please.
>
> Who owns one?
>
> Mac
> --
> --
>
> -Original Message-
> From: 
> Sent: Aug 7, 2021 11:35 PM
> To: 
> Subject: RE: Dadoing drawer sides on the LOM1200
>
> Yes my last goal is to own a legacy Z axis I know I can make one but I
> would like a legacy one too. And of course I always want your rotary cross
> slide yours is the only one I have ever seen.
>
> Bill
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Tim Ziegler
> *Sent:* Sunday, 8 August 2021 1:25 PM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* Re: Dadoing drawer sides on the LOM1200
>
>
>
> Sounds pretty awesome though.
>
> Guess I better start looking for more parts lol.
>
> Have a good night.
>
>
>
> Kind Regards,
>
>
>
> Timothy J. Ziegler
>
> Ziegler WoodWork & Specialty
>
> 14171 160th Ave.
>
> Foreston MN 56330
>
>
>
> 320-294-5798 shop
>
> 320-630-2243 cell
>
>
>
>
>
> On Sat, Aug 7, 2021 at 10:22 PM  wrote:
>
> Right, but you can slide both tailstocks all the way to either end to do
> really long work if necessary . I have even milled 2 separate operations
> and different pitches on the one piece at the same time for fun but it’s
> just too difficult to do to be practical and way to long to set up
>
>
>
> Bill
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Tim Ziegler
> *Sent:* Sunday, 8 August 2021 12:20 PM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* Re: Dadoing drawer sides on the LOM1200
>
>
>
> So Bill, you run with two tail stocks in the center and the headstocks on
> both ends then right?
>
> Kind Regards,
>
>
>
> Timothy J. Ziegler
>
> Ziegler WoodWork & Specialty
>
> 14171 160th Ave.
>
> Foreston MN 56330
>
>
>
> 320-294-5798 shop
>
> 320-630-2243 cell
>
>
>
>
>
> On Sat, Aug 7, 2021 at 7:53 AM  wrote:
>
> Yes that’s why I run 2 saddles, 2 headstocks, 2 tailstocks and 2
> leadscrews it gives me the option to have 2 separate jobs set up at the
> same time. Im just missing the z axis I really must make another.
>
> As for another split nut didn’t you buy the 5/8X4 acme tap on ebay like me
> and curt did?
>
> That way you can make your own.
>
>
>
> Bill
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Tim Ziegler
> *Sent:* Saturday, 7 August 2021 8:51 PM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* Re: Dadoing drawer sides on the LOM1200
>
>
>
> Hey Bill,
>
>
>
> Yeah I put my Z axis system back on to run more of the dado's and grooves
> that i do.
>
> and put it on the left that way I can still leave my plunge router over on
> the end where I
>
> tend to play at the moment. I like the plunge action much better for
> getting down into
>
> cut and back out. So much quicker. but the Z axis saddle has a
> prominent place in what
>
> I am doing when horizontal and vertical milling. Grooves and Dados etc...
>
> I do need to get another complete split nut system for the acme thread
> though. Currently
>
> I manually slide the Z axis Carriage/saddle.
>
> Kind Regards,
>
>
>
> Timothy J. Ziegler
>
> Ziegler WoodWork & Specialty
>
> 14171 160th Ave.
>
> Foreston MN 56330
>
>
>
> 320-294-5798 shop
>
> 320-630-2243 cell
>
>
>
>
>
> On Sat, Aug 7, 2021 at 1:37 AM  wrote:
>
> Not at all Tim all work on the mill is a big deal ,looks like your running
> 2 saddles on your mill what a good idea I wonder where you got that idea
> from?
>
> To a beginner this would be very interesting.
>
> Bill
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *
> timjz...@gmail.com
> *Sent:* Saturday, 7 August 2021 12:41 PM
> *To:* Legacy Ornamental Mills 
> *Subject:* Dadoing drawer sides on the LOM1200
>
>
>
> I have been doing a lot of dado's on my LOM 1200
>
> This has been working extremely well as you can see what your doing.
>
> Set up is as quick as the router table or faster and far easier to see.
>
> I'd assume no big deal to most but this machine has to own up to the
>
> space it uses in my shop.
>
> I have done many 1/4 dados and several 3/4 X 1/4 deep for cabinet work.
>
> Here I used the Horizontal vise other times I have a piece of MDF that I
> mount
>
> on the rails just for dado's
>
>
>
>
>
> Kind regards,
>
>
>
> Tim J. Ziegler
>
> Ziegler WoodWork & Specialty
>
> 14171 160th Ave.
>
> Foreston MN 56330
>
>
>
> 320-294-5798 shop
>
> 320-630-2243 cell
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group 

Re: Re Group security

[Tim Krause]

Hello Brigitte,

Can you forward three or four of the messages to artsco...@gmail.com. 

On Aug 8, 2021, 2:41 AM, at 2:41 AM, Brigitte Graham 
 wrote:
>Bill, Tim K
>Thanks!
>Like I said, I am quite capable of just deleting these unwanted emails.
>I am more concerned about how they got my details, and I am guessing
>that
>it might have been through our LOM group, because it is my only contact
>with anyone from the USA.
>Cheers
>Brigitte
>
>On Sun, 8 Aug 2021 at 10:22,  wrote:
>
>> Tim K said to tell you he is going to look into it Brigitte,
>>
>>
>>
>> Bill
>>
>>
>>
>> *From:* legacy-ornamental-mills@googlegroups.com <
>> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Brigitte
>Graham
>> *Sent:* Saturday, 7 August 2021 8:05 PM
>> *To:* legacy-ornamental-mills
>
>> *Subject:* Re: Re Group security
>>
>>
>>
>> Bill,
>>
>> Thanks for that
>>
>> B
>>
>>
>>
>> On Sat, 7 Aug 2021 at 10:30,  wrote:
>>
>> No problem Brigitte I will forward your email to Tim K.
>>
>>
>>
>> Bill
>>
>>
>>
>> *From:* legacy-ornamental-mills@googlegroups.com <
>> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Brigitte
>Graham
>> *Sent:* Saturday, 7 August 2021 7:16 PM
>> *To:* legacy-ornamental-mills
>
>> *Subject:* Re Group security
>>
>>
>>
>> Morning/Afternoon People,
>>
>> I am a little worried that the group's security has been breached.
>>
>> Here in the UK, I am getting lots of emails from USA insurance/home
>> security firms pushing me to install one of their systems. I know I
>can
>> (and do) just delete the emails. The only contact I have with USA is
>> through this group, so I am assuming that our LOM group has been
>> infiltrated?
>>
>> Please could someone check this out?
>>
>> Cheers
>>
>> Brigitte
>>
>>
>>
>>
>>
>>
>>
>> --
>> You received this message because you are subscribed to the Google
>Groups
>> "Legacy Ornamental Mills" group.
>> To unsubscribe from this group and stop receiving emails from it,
>send an
>> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
>> To view this discussion on the web visit
>>
>https://groups.google.com/d/msgid/legacy-ornamental-mills/CAPjOc2PtUmB0vahjCsSGmRMb7Tss-%3DE36EsGjfYmLXsXvVgGQw%40mail.gmail.com
>>
>
>> .
>>
>> --
>> You received this message because you are subscribed to the Google
>Groups
>> "Legacy Ornamental Mills" group.
>> To unsubscribe from this group and stop receiving emails from it,
>send an
>> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
>> To view this discussion on the web visit
>>
>https://groups.google.com/d/msgid/legacy-ornamental-mills/000401d78b6e%24d0c84c10%247258e430%24%40mmnet.com.au
>>
>
>> .
>>
>> --
>> You received this message because you are subscribed to the Google
>Groups
>> "Legacy Ornamental Mills" group.
>> To unsubscribe from this group and stop receiving emails from it,
>send an
>> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
>> To view this discussion on the web visit
>>
>https://groups.google.com/d/msgid/legacy-ornamental-mills/CAPjOc2M7a_F4RDoO9VD2%3DoNm_VYwMJ8TQ%2BBUkE9_sfW094Kugg%40mail.gmail.com
>>
>
>> .
>>
>> --
>> You received this message because you are subscribed to the Google
>Groups
>> "Legacy Ornamental Mills" group.
>> To unsubscribe from this group and stop receiving emails from it,
>send an
>> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
>> To view this discussion on the web visit
>>
>https://groups.google.com/d/msgid/legacy-ornamental-mills/001501d78c36%24ddd49c60%24997dd520%24%40mmnet.com.au
>>
>
>> .
>>
>
>-- 
>You received this message because you are subscribed to the Google
>Groups "Legacy Ornamental Mills" group.
>To unsubscribe from this group and stop receiving emails from it, send
>an email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
>To view this discussion on the web visit
>https://groups.google.com/d/msgid/legacy-ornamental-mills/CAPjOc2N_LV8czSJ%2BtZyWk_kSsOhuMNPs%3DJ52m3%2ByNgmJQ%2BeABg%40mail.gmail.com.

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/8601514f-d7f5-4ed1-a6d6-5903007a8d93%40comcast.net.

Re: Dadoing drawer sides on the LOM1200

[Tim Ziegler]

Me

On Sun, Aug 8, 2021, 1:35 AM M.W.Foscue  wrote:

> Bill,
>
> "Rotary Cross Slide"?
>
> Pics of one please.
>
> Who owns one?
>
> Mac
> --
> --
>
> -Original Message-
> From: 
> Sent: Aug 7, 2021 11:35 PM
> To: 
> Subject: RE: Dadoing drawer sides on the LOM1200
>
> Yes my last goal is to own a legacy Z axis I know I can make one but I
> would like a legacy one too. And of course I always want your rotary cross
> slide yours is the only one I have ever seen.
>
> Bill
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Tim Ziegler
> *Sent:* Sunday, 8 August 2021 1:25 PM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* Re: Dadoing drawer sides on the LOM1200
>
>
>
> Sounds pretty awesome though.
>
> Guess I better start looking for more parts lol.
>
> Have a good night.
>
>
>
> Kind Regards,
>
>
>
> Timothy J. Ziegler
>
> Ziegler WoodWork & Specialty
>
> 14171 160th Ave.
>
> Foreston MN 56330
>
>
>
> 320-294-5798 shop
>
> 320-630-2243 cell
>
>
>
>
>
> On Sat, Aug 7, 2021 at 10:22 PM  wrote:
>
> Right, but you can slide both tailstocks all the way to either end to do
> really long work if necessary . I have even milled 2 separate operations
> and different pitches on the one piece at the same time for fun but it’s
> just too difficult to do to be practical and way to long to set up
>
>
>
> Bill
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Tim Ziegler
> *Sent:* Sunday, 8 August 2021 12:20 PM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* Re: Dadoing drawer sides on the LOM1200
>
>
>
> So Bill, you run with two tail stocks in the center and the headstocks on
> both ends then right?
>
> Kind Regards,
>
>
>
> Timothy J. Ziegler
>
> Ziegler WoodWork & Specialty
>
> 14171 160th Ave.
>
> Foreston MN 56330
>
>
>
> 320-294-5798 shop
>
> 320-630-2243 cell
>
>
>
>
>
> On Sat, Aug 7, 2021 at 7:53 AM  wrote:
>
> Yes that’s why I run 2 saddles, 2 headstocks, 2 tailstocks and 2
> leadscrews it gives me the option to have 2 separate jobs set up at the
> same time. Im just missing the z axis I really must make another.
>
> As for another split nut didn’t you buy the 5/8X4 acme tap on ebay like me
> and curt did?
>
> That way you can make your own.
>
>
>
> Bill
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Tim Ziegler
> *Sent:* Saturday, 7 August 2021 8:51 PM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* Re: Dadoing drawer sides on the LOM1200
>
>
>
> Hey Bill,
>
>
>
> Yeah I put my Z axis system back on to run more of the dado's and grooves
> that i do.
>
> and put it on the left that way I can still leave my plunge router over on
> the end where I
>
> tend to play at the moment. I like the plunge action much better for
> getting down into
>
> cut and back out. So much quicker. but the Z axis saddle has a
> prominent place in what
>
> I am doing when horizontal and vertical milling. Grooves and Dados etc...
>
> I do need to get another complete split nut system for the acme thread
> though. Currently
>
> I manually slide the Z axis Carriage/saddle.
>
> Kind Regards,
>
>
>
> Timothy J. Ziegler
>
> Ziegler WoodWork & Specialty
>
> 14171 160th Ave.
>
> Foreston MN 56330
>
>
>
> 320-294-5798 shop
>
> 320-630-2243 cell
>
>
>
>
>
> On Sat, Aug 7, 2021 at 1:37 AM  wrote:
>
> Not at all Tim all work on the mill is a big deal ,looks like your running
> 2 saddles on your mill what a good idea I wonder where you got that idea
> from?
>
> To a beginner this would be very interesting.
>
> Bill
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *
> timjz...@gmail.com
> *Sent:* Saturday, 7 August 2021 12:41 PM
> *To:* Legacy Ornamental Mills 
> *Subject:* Dadoing drawer sides on the LOM1200
>
>
>
> I have been doing a lot of dado's on my LOM 1200
>
> This has been working extremely well as you can see what your doing.
>
> Set up is as quick as the router table or faster and far easier to see.
>
> I'd assume no big deal to most but this machine has to own up to the
>
> space it uses in my shop.
>
> I have done many 1/4 dados and several 3/4 X 1/4 deep for cabinet work.
>
> Here I used the Horizontal vise other times I have a piece of MDF that I
> mount
>
> on the rails just for dado's
>
>
>
>
>
> Kind regards,
>
>
>
> Tim J. Ziegler
>
> Ziegler WoodWork & Specialty
>
> 14171 160th Ave.
>
> Foreston MN 56330
>
>
>
> 320-294-5798 shop
>
> 320-630-2243 cell
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> 

Re: Dadoing drawer sides on the LOM1200

[Tim Ziegler]

Hey Bill

 Yeah hard to believe all the bells on my WC right. I put a different
router on it a bit ago too. I had to make a new router plate for it. Was
Plexi and it just seemed to crack in about 50 PCs. I glued it back together
to copy it as a pattern. Made one from the self healing white plastic.
Slides super smooth now. I need to find another couple drive motors though
because that's where I took the drive for my 1200.  Anyway nice unit.
Raining this morning so might be a good day to play. Lol


Tim

On Sat, Aug 7, 2021, 10:35 PM  wrote:

> Yes my last goal is to own a legacy Z axis I know I can make one but I
> would like a legacy one too. And of course I always want your rotary cross
> slide yours is the only one I have ever seen.
>
> Bill
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Tim Ziegler
> *Sent:* Sunday, 8 August 2021 1:25 PM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* Re: Dadoing drawer sides on the LOM1200
>
>
>
> Sounds pretty awesome though.
>
> Guess I better start looking for more parts lol.
>
> Have a good night.
>
>
> Kind Regards,
>
>
>
> Timothy J. Ziegler
>
> Ziegler WoodWork & Specialty
>
> 14171 160th Ave.
>
> Foreston MN 56330
>
>
>
> 320-294-5798 shop
>
> 320-630-2243 cell
>
>
>
>
>
> On Sat, Aug 7, 2021 at 10:22 PM  wrote:
>
> Right, but you can slide both tailstocks all the way to either end to do
> really long work if necessary . I have even milled 2 separate operations
> and different pitches on the one piece at the same time for fun but it’s
> just too difficult to do to be practical and way to long to set up
>
>
>
> Bill
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Tim Ziegler
> *Sent:* Sunday, 8 August 2021 12:20 PM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* Re: Dadoing drawer sides on the LOM1200
>
>
>
> So Bill, you run with two tail stocks in the center and the headstocks on
> both ends then right?
>
> Kind Regards,
>
>
>
> Timothy J. Ziegler
>
> Ziegler WoodWork & Specialty
>
> 14171 160th Ave.
>
> Foreston MN 56330
>
>
>
> 320-294-5798 shop
>
> 320-630-2243 cell
>
>
>
>
>
> On Sat, Aug 7, 2021 at 7:53 AM  wrote:
>
> Yes that’s why I run 2 saddles, 2 headstocks, 2 tailstocks and 2
> leadscrews it gives me the option to have 2 separate jobs set up at the
> same time. Im just missing the z axis I really must make another.
>
> As for another split nut didn’t you buy the 5/8X4 acme tap on ebay like me
> and curt did?
>
> That way you can make your own.
>
>
>
> Bill
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Tim Ziegler
> *Sent:* Saturday, 7 August 2021 8:51 PM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* Re: Dadoing drawer sides on the LOM1200
>
>
>
> Hey Bill,
>
>
>
> Yeah I put my Z axis system back on to run more of the dado's and grooves
> that i do.
>
> and put it on the left that way I can still leave my plunge router over on
> the end where I
>
> tend to play at the moment. I like the plunge action much better for
> getting down into
>
> cut and back out. So much quicker. but the Z axis saddle has a
> prominent place in what
>
> I am doing when horizontal and vertical milling. Grooves and Dados etc...
>
> I do need to get another complete split nut system for the acme thread
> though. Currently
>
> I manually slide the Z axis Carriage/saddle.
>
> Kind Regards,
>
>
>
> Timothy J. Ziegler
>
> Ziegler WoodWork & Specialty
>
> 14171 160th Ave.
>
> Foreston MN 56330
>
>
>
> 320-294-5798 shop
>
> 320-630-2243 cell
>
>
>
>
>
> On Sat, Aug 7, 2021 at 1:37 AM  wrote:
>
> Not at all Tim all work on the mill is a big deal ,looks like your running
> 2 saddles on your mill what a good idea I wonder where you got that idea
> from?
>
> To a beginner this would be very interesting.
>
> Bill
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *
> timjz...@gmail.com
> *Sent:* Saturday, 7 August 2021 12:41 PM
> *To:* Legacy Ornamental Mills 
> *Subject:* Dadoing drawer sides on the LOM1200
>
>
>
> I have been doing a lot of dado's on my LOM 1200
>
> This has been working extremely well as you can see what your doing.
>
> Set up is as quick as the router table or faster and far easier to see.
>
> I'd assume no big deal to most but this machine has to own up to the
>
> space it uses in my shop.
>
> I have done many 1/4 dados and several 3/4 X 1/4 deep for cabinet work.
>
> Here I used the Horizontal vise other times I have a piece of MDF that I
> mount
>
> on the rails just for dado's
>
>
>
>
>
> Kind regards,
>
>
>
> Tim J. Ziegler
>
> Ziegler WoodWork & Specialty
>
> 14171 160th Ave.
>
> Foreston MN 56330
>
>
>
> 320-294-5798 shop
>
> 320-630-2243 cell
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy 

Re: Re Group security

[Brigitte Graham]

Bill, Tim K
Thanks!
Like I said, I am quite capable of just deleting these unwanted emails.
I am more concerned about how they got my details, and I am guessing that
it might have been through our LOM group, because it is my only contact
with anyone from the USA.
Cheers
Brigitte

On Sun, 8 Aug 2021 at 10:22,  wrote:

> Tim K said to tell you he is going to look into it Brigitte,
>
>
>
> Bill
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Brigitte Graham
> *Sent:* Saturday, 7 August 2021 8:05 PM
> *To:* legacy-ornamental-mills 
> *Subject:* Re: Re Group security
>
>
>
> Bill,
>
> Thanks for that
>
> B
>
>
>
> On Sat, 7 Aug 2021 at 10:30,  wrote:
>
> No problem Brigitte I will forward your email to Tim K.
>
>
>
> Bill
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Brigitte Graham
> *Sent:* Saturday, 7 August 2021 7:16 PM
> *To:* legacy-ornamental-mills 
> *Subject:* Re Group security
>
>
>
> Morning/Afternoon People,
>
> I am a little worried that the group's security has been breached.
>
> Here in the UK, I am getting lots of emails from USA insurance/home
> security firms pushing me to install one of their systems. I know I can
> (and do) just delete the emails. The only contact I have with USA is
> through this group, so I am assuming that our LOM group has been
> infiltrated?
>
> Please could someone check this out?
>
> Cheers
>
> Brigitte
>
>
>
>
>
>
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/CAPjOc2PtUmB0vahjCsSGmRMb7Tss-%3DE36EsGjfYmLXsXvVgGQw%40mail.gmail.com
> 
> .
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/000401d78b6e%24d0c84c10%247258e430%24%40mmnet.com.au
> 
> .
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/CAPjOc2M7a_F4RDoO9VD2%3DoNm_VYwMJ8TQ%2BBUkE9_sfW094Kugg%40mail.gmail.com
> 
> .
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/001501d78c36%24ddd49c60%24997dd520%24%40mmnet.com.au
> 
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAPjOc2N_LV8czSJ%2BtZyWk_kSsOhuMNPs%3DJ52m3%2ByNgmJQ%2BeABg%40mail.gmail.com.

RE: Re Group security

[bulkeley]

Tim K said to tell you he is going to look into it Brigitte,

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of Brigitte Graham
Sent: Saturday, 7 August 2021 8:05 PM
To: legacy-ornamental-mills 
Subject: Re: Re Group security

 

Bill,

Thanks for that

B

 

On Sat, 7 Aug 2021 at 10:30, mailto:bulke...@mmnet.com.au> > wrote:

No problem Brigitte I will forward your email to Tim K.

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
  
mailto:legacy-ornamental-mills@googlegroups.com> > On Behalf Of Brigitte Graham
Sent: Saturday, 7 August 2021 7:16 PM
To: legacy-ornamental-mills mailto:legacy-ornamental-mills@googlegroups.com> >
Subject: Re Group security

 

Morning/Afternoon People,

I am a little worried that the group's security has been breached.

Here in the UK, I am getting lots of emails from USA insurance/home security 
firms pushing me to install one of their systems. I know I can (and do) just 
delete the emails. The only contact I have with USA is through this group, so I 
am assuming that our LOM group has been infiltrated? 

Please could someone check this out?

Cheers

Brigitte

 

 

 

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
 .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAPjOc2PtUmB0vahjCsSGmRMb7Tss-%3DE36EsGjfYmLXsXvVgGQw%40mail.gmail.com
 

 .

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
 .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/000401d78b6e%24d0c84c10%247258e430%24%40mmnet.com.au
 

 .

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
 .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAPjOc2M7a_F4RDoO9VD2%3DoNm_VYwMJ8TQ%2BBUkE9_sfW094Kugg%40mail.gmail.com
 

 .

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/001501d78c36%24ddd49c60%24997dd520%24%40mmnet.com.au.

RE: Dadoing drawer sides on the LOM1200

[M.W.Foscue]

Bill,
"Rotary Cross Slide"?
Pics of one please.
Who owns one?
Mac
-Original Message-
From: 
Sent: Aug 7, 2021 11:35 PM
To: 
Subject: RE: Dadoing drawer sides on the LOM1200

Yes my last goal is to own a legacy Z axis I know I can make one but I would 
like a legacy one too. And of course I always want your rotary cross slide 
yours is the only one I have ever seen.
Bill
 
From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of Tim Ziegler
Sent: Sunday, 8 August 2021 1:25 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Dadoing drawer sides on the LOM1200


Sounds pretty awesome though. 
Guess I better start looking for more parts lol. 

Have a good night. 


Kind Regards,


Timothy J. Ziegler

Ziegler WoodWork  Specialty

14171 160th Ave.

Foreston MN 56330



320-294-5798 shop

320-630-2243 cell








On Sat, Aug 7, 2021 at 10:22 PM  wrote:

Right, but you can slide both tailstocks all the way to either end to do really 
long work if necessary . I have even milled 2 separate operations and different 
pitches on the one piece at the same time for fun but its just too 
difficult to do to be practical and way to long to set up 
 
Bill
 
From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of Tim Ziegler
Sent: Sunday, 8 August 2021 12:20 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Dadoing drawer sides on the LOM1200


So Bill, you run with two tail stocks in the center and the headstocks on both 
ends then right?
Kind Regards,


Timothy J. Ziegler

Ziegler WoodWork  Specialty

14171 160th Ave.

Foreston MN 56330



320-294-5798 shop

320-630-2243 cell







On Sat, Aug 7, 2021 at 7:53 AM  wrote:

Yes thats why I run 2 saddles, 2 headstocks, 2 tailstocks and 2 
leadscrews it gives me the option to have 2 separate jobs set up at the same 
time. Im just missing the z axis I really must make another.
As for another split nut didnt you buy the 5/8X4 acme tap on ebay like 
me and curt did?
That way you can make your own.
 
Bill 
 
From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of Tim Ziegler
Sent: Saturday, 7 August 2021 8:51 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Dadoing drawer sides on the LOM1200


Hey Bill,


Yeah I put my Z axis system back on to run more of the dado's and grooves that 
i do.

and put it on the left that way I can still leave my plunge router over on the 
end where I 

tend to play at the moment. I like the plunge action much better for getting 
down into

cut and back out. So much quicker. but the Z axis saddle has a prominent place 
in what 

I am doing when horizontal and vertical milling. Grooves and Dados etc...

I do need to get another complete split nut system for the acme thread though. 
Currently 

I manually slide the Z axis Carriage/saddle. 
Kind Regards,


Timothy J. Ziegler

Ziegler WoodWork  Specialty

14171 160th Ave.

Foreston MN 56330



320-294-5798 shop

320-630-2243 cell








On Sat, Aug 7, 2021 at 1:37 AM  wrote:

Not at all Tim all work on the mill is a big deal ,looks like your running 2 
saddles on your mill what a good idea I wonder where you got that idea from?
To a beginner this would be very interesting.
Bill
 
From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of timjz...@gmail.com
Sent: Saturday, 7 August 2021 12:41 PM
To: Legacy Ornamental Mills 
Subject: Dadoing drawer sides on the LOM1200


I have been doing a lot of dado's on my LOM 1200
This has been working extremely well as you can see what your doing.

Set up is as quick as the router table or faster and far easier to see. 

I'd assume no big deal to most but this machine has to own up to the 

space it uses in my shop.

I have done many 1/4 dados and several 3/4 X 1/4 deep for cabinet work. 

Here I used the Horizontal vise other times I have a piece of MDF that I mount 

on the rails just for dado's





Kind regards,



Tim J. Ziegler

Ziegler WoodWork  Specialty

14171 160th Ave. 

Foreston MN 56330



320-294-5798 shop

320-630-2243 cell

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/efebc5d7-386e-4bf5-a65f-cdce627cba78n%40googlegroups.com.


-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/01d78b56%24b6f50c00%2424df2400%24%40mmnet.com.au.

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails