date:20230120

Re: 🔴 Couple of Bunkys just started a Premiere: Legacy Ornamental Mill Making a rope twist cane #walkingstick

2023-01-20 Thread 'Curt George' via Legacy Ornamental Mills

 Hello Everyone. 
Your #1 in my book, Bill. ;-)  Keep up the good work.
C.A.G.
On Friday, January 20, 2023 at 03:58:26 PM EST,  
wrote:  
 
 
Well thank you sir for your kind words, my idea was to make videos that people 
can follow along at the same time

Sort of like those cooking shows you see on tv and if it’s a bit too long 
winded or your more experienced  click on the settings button and increase the 
playback speed

That way hopefully most watchers are happy. I also don’t talk on my videos for 
2 reasons, one accents not everyone can understand a

Australian accent and I’m a terrible public speaker but most people can read it 
lol and 2 when you run at faster speed with the music turned down you can still 
understand what is going on by reading . Steven Spielberg I’m not  lol but I do 
try to cover all the bases. And I’m willing to hand over the reigns  any time 
someone else wants to do it, I just did videos because no one else was doing 
legacy ones and the group was missing out

I don’t enjoy making them at all.

 

Bill

  

From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of Rick Hutley
Sent: Saturday, 21 January 2023 7:19 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: 🔴 Couple of Bunkys just started a Premiere: Legacy Ornamental Mill 
Making a rope twist cane #walkingstick

  

Ah but yours are good Bill - very good. You describe (and show) every step, 
which is essential with something as complex as some of your Legacy creations. 
What frustrates me me about ‘typical’ YouTube videos are those that show the 
same, often simple, step over and over at normal speed. E.g. I don’t need to 
see someone take several minutes to insert 14+ screws into a board - one (or at 
a push, two) would suffice. Your Legacy pieces, by contrast, often involve 
intricate, non-repetitive actions and you, taking your time to show us exactly 
what/how you do things, at normal speed, is highly valuable.

  

Don’t stop!!

  

Rick






On Jan 20, 2023, at 14:44, bulke...@mmnet.com.au wrote:





Oh well like I always say I make legacy videos but I never said they are good 
videos lol

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of Tim Ziegler
Sent: Saturday, 21 January 2023 2:18 AM
To: LOM Group 
Subject: Re: 🔴 Couple of Bunkys just started a Premiere: Legacy Ornamental Mill 
Making a rope twist cane #walkingstick

 

Hey Bill we're not letting you off the hook that easy. You've way over 20 years 
experience on LOM's, we still need you. 

 

 

 

On Fri, Jan 20, 2023, 7:36 AM  wrote:


At last somebody that can make legacy videos better than me now I don’t have to 
make them 

 

Bill

 

 

 

From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of Rick Hutley
Sent: Friday, 20 January 2023 8:47 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: 🔴 Couple of Bunkys just started a Premiere: Legacy Ornamental Mill 
Making a rope twist cane #walkingstick

 

Subscribed - great videos. I love the speed of the videos, with voice 
description overlays. I get very frustrated by the ‘usual’ videos one finds, 
where they repeat every step at normal speed - after seeing someone cut one 
board, I don’t then need to see them repeat it for the other 3 sides of the box 
- well, not at normal speed. You do it in fast mode and describe at normal 
speed: all 4 sides demonstrated in the timeline of one side. Excellent 😊

 

Rick

 


On Jan 19, 2023, at 21:57, Tim Woodard  wrote:





Thanks for sharing. my wife and I are Couple of bunkys on youtube please 
consider subscribing we do a new project every Thursday. check us out 
https://www.youtube.com/@CoupleofBunkies

 

On Thu, Jan 19, 2023 at 9:49 PM Tim Ziegler  wrote:


Here you go guys eat it up. 

New LOM owner having fun.




Kind Regards,

 

Timothy J. Ziegler

Ziegler WoodWork & Specialty

14171 160th Ave.

Foreston MN 56330

 

320-294-5798 shop

320-630-2243 cell

 

-- Forwarded message -
From: YouTube 
Date: Thu, Jan 19, 2023 at 5:00 PM
Subject: 🔴 Couple of Bunkys just started a Premiere: Legacy Ornamental Mill 
Making a rope twist cane #walkingstick
To: Tim Ziegler 

 

Live on YouTube: Couple of Bunkys - Legacy Ornamental Mill Making a rope twist 
cane #walkingstick! 

|  | 
| 
| 

 |

 |
|  |
|  |
| 
| 
| 
| 

 |
| 
PREMIERE
 |

 |
| 
|  |

 |  |  |
| 
| 

 |  | 
| 
| 
Legacy Ornamental Mill Making a rope twist cane #walkingstick 
 |
| 
Couple of Bunkys 
 |

 |

 |

 |  |  |
| 
|  |

 |  |  |

 |

 |
|  |
| 
| 
You were sent this email because you chose to receive updates from Couple of 
Bunkys. 
 |
| 
|  |

 |
| 
© 2023 YouTube, LLC 901 Cherry Ave, San Bruno, CA 94066 
 |
| 
|  |

 |

 |

 |  |
| 
|  | 

 |  | 

 |

 |




-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this

RE: STOP THE PRESS, NEW SPLIT NUT

2023-01-20 Thread bulkeley

https://www.ebay.com/itm/175270225800?hash=item28ceeb6788:g:zNUAAOSwGk5f4Z1a 

 &amdata=enc%

 

ok this is not the seller I got my tap from its gone now but like I said 
extremely hard to find but I think it’s the same tap

my second one was from China too but because your only tapping plastic and if 
your carful these Chinese taps are ok

if you can find a better quality tap buy it I looked for 10 years before one 
came up the tap in the video is Chinese 

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of bulke...@mmnet.com.au
Sent: Saturday, 21 January 2023 3:14 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: RE: STOP THE PRESS, NEW SPLIT NUT

 

Oh I’m not sure if I still have that archive time I think. As you know that tap 
was super rare and hard to find till I found one 

https://www.youtube.com/watch?v=FOUW3xblB_4 
 
&t=3s&ab_channel=aussiman77181

 

here is a piece of Delrin I tapped for those who have not seen the thread being 
made.

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
  
mailto:legacy-ornamental-mills@googlegroups.com> > On Behalf Of Tim Ziegler
Sent: Saturday, 21 January 2023 2:50 PM
To: legacy-ornamental-mills@googlegroups.com 
 
Subject: Re: STOP THE PRESS, NEW SPLIT NUT

 

Yup Bill if you have the link you sent when I bought my ACME Tap please post 
that for him too..




Kind Regards,

 

Timothy J. Ziegler

Ziegler WoodWork & Specialty

14171 160th Ave.

Foreston MN 56330

 

320-294-5798 shop

320-630-2243 cell

 

 

On Fri, Jan 20, 2023 at 8:35 PM M.W.Foscue mailto:mwfos...@earthlink.net> > wrote:

And the "Acme thread" specifier is important - don't forget that one.

Mac


  _  


  _  


-Original Message-
From: mailto:legacy-ornamental-mills@googlegroups.com> >
Sent: Jan 20, 2023 8:46 PM
To: mailto:legacy-ornamental-mills@googlegroups.com> >
Subject: Re: STOP THE PRESS, NEW SPLIT NUT

 

yup sorry my dumb. was not thinking  on that one.  




Kind Regards, 

 

Timothy J. Ziegler

Ziegler WoodWork & Specialty

14171 160th Ave.

Foreston MN 56330

 

320-294-5798 shop

320-630-2243 cell

 

On Fri, Jan 20, 2023 at 7:20 PM mailto:bulke...@mmnet.com.au> > wrote:

Sorry Tim its 5/8 X 4 tpi acme tap

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
  
mailto:legacy-ornamental-mills@googlegroups.com> > On Behalf Of Tim Ziegler
Sent: Saturday, 21 January 2023 12:16 PM
To: legacy-ornamental-mills@googlegroups.com 
 
Subject: Re: STOP THE PRESS, NEW SPLIT NUT

 

I believe 5/8 8 tpi and right hand.




Kind Regards,

 

Timothy J. Ziegler

Ziegler WoodWork & Specialty

14171 160th Ave.

Foreston MN 56330

 

320-294-5798 shop

320-630-2243 cell

 

 

On Fri, Jan 20, 2023 at 3:31 PM Eric Johnson mailto:eric.johnson...@gmail.com> > wrote:

What Size tap is that?

 

On Thu, Jan 19, 2023, 09:23 'Curt George' via Legacy Ornamental Mills 
mailto:legacy-ornamental-mills@googlegroups.com> > wrote:

Mike that is Awesome!

 

Can you post the file or show us the print?

 

C.A.G.

 

On Thursday, January 19, 2023 at 06:19:49 AM EST, Jeff Richmond 
mailto:jtrichmo...@gmail.com> > wrote: 

 

 

Awesome, thanks Mike and Cindy, 👍

 

Jeff from Connecticut 
Sent from my iPhone

 

On Jan 18, 2023, at 11:17 PM, Okla Mike (Liltwisted) mailto:legacym...@iglide.net> > wrote:

Spoke with Cindy today and she sent a drawing of the split nut.  Here it is for 
anyone who would like it.  Also had a link to some Delrin.

https://urldefense.proofpoint.com/v2/url?u=https-3A__www.amazon.com_BuyPlastic-2DDelrin-2DAcetal-2DCopolymer-2DPlastic_dp_B08M6GL5J4_ref-3Dsr-5F1-5F1-5Fsspa-3Fcrid-3DW167H062AMGD-26keywords-3DBlack-252BDelrin-26qid-3D1673991547-26sprefix-3Dblack-252Bdelrin-252B-252Caps-252C125-26sr-3D8-2D1-2Dspons-26spLa-3DZW5jcnlwdGVkUXVhbGlmaWVyPUEzS1JRRVA2SUQyMk9SJmVuY3J5cHRlZElkPUEwNjg4NjE1MUI1SUhQWDFIUlVVVSZlbmNyeXB0ZWRBZElkPUEwODEzMTE3M1VGVUlCUTRJRjJJNSZ3aWRnZXROYW1lPXNwX2F0ZiZhY3Rpb249Y2xpY2tSZWRpcmVjdCZkb05vdExvZ0NsaWNrPXRydWU-26th-3D1&d=DwMFaQ&c=euGZstcaTDllvimEN8b7jXrwqOf-v5A_CdpgnVfiiMM&r=EiSmJGnwOotC7uMYII2hfys7Krtpj215bytLA3BUICM&m=WLbg8itsi5LsyJcpmtPfqadu7pagz-HIe0ImQOLk5cg&s=-0eGD1BaqN4DFN2TaxK8AR-iNRoSUDapKZ6fos0ewvU&e=

Mike OK

On 11/6/2022 8:56 PM, timjz...@gmail.com   wrote:

Well I finally took the time to make a couple of split nuts from a material  

referred to as HDPE, a self healing white plastic that actually drills and 

taps very nicely. 

I took all my measurements from an other split nut. and cut to a size the 

block I'd be using. I marked out and drilled the piece with a 11 mm Brad point

bit. Then I put in vise an

RE: STOP THE PRESS, NEW SPLIT NUT

2023-01-20 Thread bulkeley

Oh I’m not sure if I still have that archive time I think. As you know that tap 
was super rare and hard to find till I found one 

https://www.youtube.com/watch?v=FOUW3xblB_4 
 
&t=3s&ab_channel=aussiman77181

 

here is a piece of Delrin I tapped for those who have not seen the thread being 
made.

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of Tim Ziegler
Sent: Saturday, 21 January 2023 2:50 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: STOP THE PRESS, NEW SPLIT NUT

 

Yup Bill if you have the link you sent when I bought my ACME Tap please post 
that for him too..




Kind Regards,

 

Timothy J. Ziegler

Ziegler WoodWork & Specialty

14171 160th Ave.

Foreston MN 56330

 

320-294-5798 shop

320-630-2243 cell

 

 

On Fri, Jan 20, 2023 at 8:35 PM M.W.Foscue mailto:mwfos...@earthlink.net> > wrote:

And the "Acme thread" specifier is important - don't forget that one.

Mac


  _  


  _  


-Original Message-
From: mailto:legacy-ornamental-mills@googlegroups.com> >
Sent: Jan 20, 2023 8:46 PM
To: mailto:legacy-ornamental-mills@googlegroups.com> >
Subject: Re: STOP THE PRESS, NEW SPLIT NUT

 

yup sorry my dumb. was not thinking  on that one.  




Kind Regards, 

 

Timothy J. Ziegler

Ziegler WoodWork & Specialty

14171 160th Ave.

Foreston MN 56330

 

320-294-5798 shop

320-630-2243 cell

 

On Fri, Jan 20, 2023 at 7:20 PM mailto:bulke...@mmnet.com.au> > wrote:

Sorry Tim its 5/8 X 4 tpi acme tap

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
  
mailto:legacy-ornamental-mills@googlegroups.com> > On Behalf Of Tim Ziegler
Sent: Saturday, 21 January 2023 12:16 PM
To: legacy-ornamental-mills@googlegroups.com 
 
Subject: Re: STOP THE PRESS, NEW SPLIT NUT

 

I believe 5/8 8 tpi and right hand.




Kind Regards,

 

Timothy J. Ziegler

Ziegler WoodWork & Specialty

14171 160th Ave.

Foreston MN 56330

 

320-294-5798 shop

320-630-2243 cell

 

 

On Fri, Jan 20, 2023 at 3:31 PM Eric Johnson mailto:eric.johnson...@gmail.com> > wrote:

What Size tap is that?

 

On Thu, Jan 19, 2023, 09:23 'Curt George' via Legacy Ornamental Mills 
mailto:legacy-ornamental-mills@googlegroups.com> > wrote:

Mike that is Awesome!

 

Can you post the file or show us the print?

 

C.A.G.

 

On Thursday, January 19, 2023 at 06:19:49 AM EST, Jeff Richmond 
mailto:jtrichmo...@gmail.com> > wrote: 

 

 

Awesome, thanks Mike and Cindy, 👍

 

Jeff from Connecticut 
Sent from my iPhone

 

On Jan 18, 2023, at 11:17 PM, Okla Mike (Liltwisted) mailto:legacym...@iglide.net> > wrote:

Spoke with Cindy today and she sent a drawing of the split nut.  Here it is for 
anyone who would like it.  Also had a link to some Delrin.

https://urldefense.proofpoint.com/v2/url?u=https-3A__www.amazon.com_BuyPlastic-2DDelrin-2DAcetal-2DCopolymer-2DPlastic_dp_B08M6GL5J4_ref-3Dsr-5F1-5F1-5Fsspa-3Fcrid-3DW167H062AMGD-26keywords-3DBlack-252BDelrin-26qid-3D1673991547-26sprefix-3Dblack-252Bdelrin-252B-252Caps-252C125-26sr-3D8-2D1-2Dspons-26spLa-3DZW5jcnlwdGVkUXVhbGlmaWVyPUEzS1JRRVA2SUQyMk9SJmVuY3J5cHRlZElkPUEwNjg4NjE1MUI1SUhQWDFIUlVVVSZlbmNyeXB0ZWRBZElkPUEwODEzMTE3M1VGVUlCUTRJRjJJNSZ3aWRnZXROYW1lPXNwX2F0ZiZhY3Rpb249Y2xpY2tSZWRpcmVjdCZkb05vdExvZ0NsaWNrPXRydWU-26th-3D1&d=DwMFaQ&c=euGZstcaTDllvimEN8b7jXrwqOf-v5A_CdpgnVfiiMM&r=EiSmJGnwOotC7uMYII2hfys7Krtpj215bytLA3BUICM&m=WLbg8itsi5LsyJcpmtPfqadu7pagz-HIe0ImQOLk5cg&s=-0eGD1BaqN4DFN2TaxK8AR-iNRoSUDapKZ6fos0ewvU&e=

Mike OK

On 11/6/2022 8:56 PM, timjz...@gmail.com   wrote:

Well I finally took the time to make a couple of split nuts from a material  

referred to as HDPE, a self healing white plastic that actually drills and 

taps very nicely. 

I took all my measurements from an other split nut. and cut to a size the 

block I'd be using. I marked out and drilled the piece with a 11 mm Brad point

bit. Then I put in vise and proceeded to tap the ACME thread. Going back and 

forth continually cleaning it out. 

Once I completed that I cut the block in 2 pieces on the scroll saw. 

I then marked the hole for the thumb screw and drilled with a 6.5 mm drill bit.

Tapping then with a 5/16 course thread tap. 

During the drilling process I used the Rocker pen vise. 

To trim the Blocks to fit I used the Rockler Small Parts Jig to hold the block,

and save the fingers. 

Overall I am super happy I took the time to make some and they fit perfect.

there is NO play in that carriage now. Not sure how long they will last, but may

make some with Delrin at some point too. 

See photos attached.

 

Kind regards,

 

Tim J Ziegler

Ziegler WoodWork & Specialty

Ziegler Laser Worx

14171 160th Ave.

Foreston MN 56330

 

320-294-5798 shop

320-630-2243 cell

 

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornament

RE: STOP THE PRESS, NEW SPLIT NUT

2023-01-20 Thread bulkeley

No not at all buddy I’m sure people get sick of me answering questions all the 
time its better if

Others do 

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of Tim Ziegler
Sent: Saturday, 21 January 2023 2:49 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: STOP THE PRESS, NEW SPLIT NUT

 

yeah I was just thinking lathe threads and Legacy diameter. Should have just 
let you answer it. lol


Kind Regards,

 

Timothy J. Ziegler

Ziegler WoodWork & Specialty

14171 160th Ave.

Foreston MN 56330

 

320-294-5798 shop

320-630-2243 cell

 

 

On Fri, Jan 20, 2023 at 8:08 PM mailto:bulke...@mmnet.com.au> > wrote:

Easy mistake buddy a lot of people even me gets that wrong from time to time 
the 8 tpi acme is common to cnc machines

That’s why your spiralling router bits dia have to be divisible of ¼ inch or 
your multi start spirals won’t work.

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
  
mailto:legacy-ornamental-mills@googlegroups.com> > On Behalf Of Tim Ziegler
Sent: Saturday, 21 January 2023 12:46 PM
To: legacy-ornamental-mills@googlegroups.com 
 
Subject: Re: STOP THE PRESS, NEW SPLIT NUT

 

oops I think I answered wrong thanks Bill.




Kind Regards,

 

Timothy J. Ziegler

Ziegler WoodWork & Specialty

14171 160th Ave.

Foreston MN 56330

 

320-294-5798 shop

320-630-2243 cell

 

 

On Fri, Jan 20, 2023 at 7:21 PM mailto:bulke...@mmnet.com.au> > wrote:

5/8 X 4 tpi right hand acme tap 

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
  
mailto:legacy-ornamental-mills@googlegroups.com> > On Behalf Of Eric Johnson
Sent: Saturday, 21 January 2023 8:31 AM
To: legacy-ornamental-mills@googlegroups.com 
 
Subject: Re: STOP THE PRESS, NEW SPLIT NUT

 

What Size tap is that?

 

On Thu, Jan 19, 2023, 09:23 'Curt George' via Legacy Ornamental Mills 
mailto:legacy-ornamental-mills@googlegroups.com> > wrote:

Mike that is Awesome!

 

Can you post the file or show us the print?

 

C.A.G.

 

On Thursday, January 19, 2023 at 06:19:49 AM EST, Jeff Richmond 
mailto:jtrichmo...@gmail.com> > wrote: 

 

 

Awesome, thanks Mike and Cindy, 👍

 

Jeff from Connecticut 
Sent from my iPhone

 

On Jan 18, 2023, at 11:17 PM, Okla Mike (Liltwisted) mailto:legacym...@iglide.net> > wrote:

 

Spoke with Cindy today and she sent a drawing of the split nut.  Here it is for 
anyone who would like it.  Also had a link to some Delrin.

https://urldefense.proofpoint.com/v2/url?u=https-3A__www.amazon.com_BuyPlastic-2DDelrin-2DAcetal-2DCopolymer-2DPlastic_dp_B08M6GL5J4_ref-3Dsr-5F1-5F1-5Fsspa-3Fcrid-3DW167H062AMGD-26keywords-3DBlack-252BDelrin-26qid-3D1673991547-26sprefix-3Dblack-252Bdelrin-252B-252Caps-252C125-26sr-3D8-2D1-2Dspons-26spLa-3DZW5jcnlwdGVkUXVhbGlmaWVyPUEzS1JRRVA2SUQyMk9SJmVuY3J5cHRlZElkPUEwNjg4NjE1MUI1SUhQWDFIUlVVVSZlbmNyeXB0ZWRBZElkPUEwODEzMTE3M1VGVUlCUTRJRjJJNSZ3aWRnZXROYW1lPXNwX2F0ZiZhY3Rpb249Y2xpY2tSZWRpcmVjdCZkb05vdExvZ0NsaWNrPXRydWU-26th-3D1&d=DwMFaQ&c=euGZstcaTDllvimEN8b7jXrwqOf-v5A_CdpgnVfiiMM&r=EiSmJGnwOotC7uMYII2hfys7Krtpj215bytLA3BUICM&m=WLbg8itsi5LsyJcpmtPfqadu7pagz-HIe0ImQOLk5cg&s=-0eGD1BaqN4DFN2TaxK8AR-iNRoSUDapKZ6fos0ewvU&e=

Mike OK

On 11/6/2022 8:56 PM, timjz...@gmail.com   wrote:

Well I finally took the time to make a couple of split nuts from a material  

referred to as HDPE, a self healing white plastic that actually drills and 

taps very nicely. 

I took all my measurements from an other split nut. and cut to a size the 

block I'd be using. I marked out and drilled the piece with a 11 mm Brad point

bit. Then I put in vise and proceeded to tap the ACME thread. Going back and 

forth continually cleaning it out. 

Once I completed that I cut the block in 2 pieces on the scroll saw. 

I then marked the hole for the thumb screw and drilled with a 6.5 mm drill bit.

Tapping then with a 5/16 course thread tap. 

During the drilling process I used the Rocker pen vise. 

To trim the Blocks to fit I used the Rockler Small Parts Jig to hold the block,

and save the fingers. 

Overall I am super happy I took the time to make some and they fit perfect.

there is NO play in that carriage now. Not sure how long they will last, but may

make some with Delrin at some point too. 

See photos attached.

 

Kind regards,

 

Tim J Ziegler

Ziegler WoodWork & Specialty

Ziegler Laser Worx

14171 160th Ave.

Foreston MN 56330

 

320-294-5798 shop

320-630-2243 cell

 

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
 .
To view this discussion on the web visit 
https

Re: STOP THE PRESS, NEW SPLIT NUT

2023-01-20 Thread Tim Ziegler

Yup Bill if you have the link you sent when I bought my ACME Tap please
post that for him too..

Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Fri, Jan 20, 2023 at 8:35 PM M.W.Foscue  wrote:

> And the "Acme thread" specifier is important - don't forget that one.
>
> Mac
> --
> --
>
> -Original Message-
> From: 
> Sent: Jan 20, 2023 8:46 PM
> To: 
> Subject: Re: STOP THE PRESS, NEW SPLIT NUT
>
>
> yup sorry my dumb. was not thinking  on that one.
>
> Kind Regards,
>
> Timothy J. Ziegler
> Ziegler WoodWork & Specialty
> 14171 160th Ave.
> Foreston MN 56330
>
> 320-294-5798 shop
> 320-630-2243 cell
>
> On Fri, Jan 20, 2023 at 7:20 PM  wrote:
>
>> Sorry Tim its 5/8 X 4 tpi acme tap
>>
>>
>>
>> Bill
>>
>>
>>
>> *From:* legacy-ornamental-mills@googlegroups.com <
>> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Tim Ziegler
>> *Sent:* Saturday, 21 January 2023 12:16 PM
>> *To:* legacy-ornamental-mills@googlegroups.com
>> *Subject:* Re: STOP THE PRESS, NEW SPLIT NUT
>>
>>
>>
>> I believe 5/8 8 tpi and right hand.
>>
>>
>> Kind Regards,
>>
>>
>>
>> Timothy J. Ziegler
>>
>> Ziegler WoodWork & Specialty
>>
>> 14171 160th Ave.
>>
>> Foreston MN 56330
>>
>>
>>
>> 320-294-5798 shop
>>
>> 320-630-2243 cell
>>
>>
>>
>>
>>
>> On Fri, Jan 20, 2023 at 3:31 PM Eric Johnson 
>> wrote:
>>
>> What Size tap is that?
>>
>>
>>
>> On Thu, Jan 19, 2023, 09:23 'Curt George' via Legacy Ornamental Mills <
>> legacy-ornamental-mills@googlegroups.com> wrote:
>>
>> Mike that is Awesome!
>>
>>
>>
>> Can you post the file or show us the print?
>>
>>
>>
>> C.A.G.
>>
>>
>>
>> On Thursday, January 19, 2023 at 06:19:49 AM EST, Jeff Richmond <
>> jtrichmo...@gmail.com> wrote:
>>
>>
>>
>>
>>
>> Awesome, thanks Mike and Cindy, 👍
>>
>>
>>
>> Jeff from Connecticut
>> Sent from my iPhone
>>
>>
>>
>> On Jan 18, 2023, at 11:17 PM, Okla Mike (Liltwisted) <
>> legacym...@iglide.net> wrote:
>>
>> Spoke with Cindy today and she sent a drawing of the split nut.  Here it
>> is for anyone who would like it.  Also had a link to some Delrin.
>>
>>
>> https://urldefense.proofpoint.com/v2/url?u=https-3A__www.amazon.com_BuyPlastic-2DDelrin-2DAcetal-2DCopolymer-2DPlastic_dp_B08M6GL5J4_ref-3Dsr-5F1-5F1-5Fsspa-3Fcrid-3DW167H062AMGD-26keywords-3DBlack-252BDelrin-26qid-3D1673991547-26sprefix-3Dblack-252Bdelrin-252B-252Caps-252C125-26sr-3D8-2D1-2Dspons-26spLa-3DZW5jcnlwdGVkUXVhbGlmaWVyPUEzS1JRRVA2SUQyMk9SJmVuY3J5cHRlZElkPUEwNjg4NjE1MUI1SUhQWDFIUlVVVSZlbmNyeXB0ZWRBZElkPUEwODEzMTE3M1VGVUlCUTRJRjJJNSZ3aWRnZXROYW1lPXNwX2F0ZiZhY3Rpb249Y2xpY2tSZWRpcmVjdCZkb05vdExvZ0NsaWNrPXRydWU-26th-3D1&d=DwMFaQ&c=euGZstcaTDllvimEN8b7jXrwqOf-v5A_CdpgnVfiiMM&r=EiSmJGnwOotC7uMYII2hfys7Krtpj215bytLA3BUICM&m=WLbg8itsi5LsyJcpmtPfqadu7pagz-HIe0ImQOLk5cg&s=-0eGD1BaqN4DFN2TaxK8AR-iNRoSUDapKZ6fos0ewvU&e=
>>
>> Mike OK
>>
>> On 11/6/2022 8:56 PM, timjz...@gmail.com wrote:
>>
>> Well I finally took the time to make a couple of split nuts from a
>> material
>>
>> referred to as HDPE, a self healing white plastic that actually drills
>> and
>>
>> taps very nicely.
>>
>> I took all my measurements from an other split nut. and cut to a size the
>>
>> block I'd be using. I marked out and drilled the piece with a 11 mm Brad
>> point
>>
>> bit. Then I put in vise and proceeded to tap the ACME thread. Going back
>> and
>>
>> forth continually cleaning it out.
>>
>> Once I completed that I cut the block in 2 pieces on the scroll saw.
>>
>> I then marked the hole for the thumb screw and drilled with a 6.5 mm
>> drill bit.
>>
>> Tapping then with a 5/16 course thread tap.
>>
>> During the drilling process I used the Rocker pen vise.
>>
>> To trim the Blocks to fit I used the Rockler Small Parts Jig to hold the
>> block,
>>
>> and save the fingers.
>>
>> Overall I am super happy I took the time to make some and they fit
>> perfect.
>>
>> there is NO play in that carriage now. Not sure how long they will last,
>> but may
>>
>> make some with Delrin at some point too.
>>
>> See photos attached.
>>
>>
>>
>> Kind regards,
>>
>>
>>
>> Tim J Ziegler
>>
>> Ziegler WoodWork & Specialty
>>
>> Ziegler Laser Worx
>>
>> 14171 160th Ave.
>>
>> Foreston MN 56330
>>
>>
>>
>> 320-294-5798 shop
>>
>> 320-630-2243 cell
>>
>>
>>
>> --
>> You received this message because you are subscribed to the Google Groups
>> "Legacy Ornamental Mills" group.
>> To unsubscribe from this group and stop receiving emails from it, send an
>> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
>> To view this discussion on the web visit
>> https://groups.google.com/d/msgid/legacy-ornamental-mills/3f867fdb-b43a-49c7-a642-b5587d279ba6n%40googlegroups.com
>> 
>> .
>>
>> --
>> You received this message because you are subscribed to

Re: STOP THE PRESS, NEW SPLIT NUT

2023-01-20 Thread Tim Ziegler

yeah I was just thinking lathe threads and Legacy diameter. Should have
just let you answer it. lol
Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Fri, Jan 20, 2023 at 8:08 PM  wrote:

> Easy mistake buddy a lot of people even me gets that wrong from time to
> time the 8 tpi acme is common to cnc machines
>
> That’s why your spiralling router bits dia have to be divisible of ¼ inch
> or your multi start spirals won’t work.
>
>
>
> Bill
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Tim Ziegler
> *Sent:* Saturday, 21 January 2023 12:46 PM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* Re: STOP THE PRESS, NEW SPLIT NUT
>
>
>
> oops I think I answered wrong thanks Bill.
>
>
> Kind Regards,
>
>
>
> Timothy J. Ziegler
>
> Ziegler WoodWork & Specialty
>
> 14171 160th Ave.
>
> Foreston MN 56330
>
>
>
> 320-294-5798 shop
>
> 320-630-2243 cell
>
>
>
>
>
> On Fri, Jan 20, 2023 at 7:21 PM  wrote:
>
> 5/8 X 4 tpi right hand acme tap
>
>
>
> Bill
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Eric Johnson
> *Sent:* Saturday, 21 January 2023 8:31 AM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* Re: STOP THE PRESS, NEW SPLIT NUT
>
>
>
> What Size tap is that?
>
>
>
> On Thu, Jan 19, 2023, 09:23 'Curt George' via Legacy Ornamental Mills <
> legacy-ornamental-mills@googlegroups.com> wrote:
>
> Mike that is Awesome!
>
>
>
> Can you post the file or show us the print?
>
>
>
> C.A.G.
>
>
>
> On Thursday, January 19, 2023 at 06:19:49 AM EST, Jeff Richmond <
> jtrichmo...@gmail.com> wrote:
>
>
>
>
>
> Awesome, thanks Mike and Cindy, 👍
>
>
>
> Jeff from Connecticut
> Sent from my iPhone
>
>
>
> On Jan 18, 2023, at 11:17 PM, Okla Mike (Liltwisted) <
> legacym...@iglide.net> wrote:
>
> 
>
> Spoke with Cindy today and she sent a drawing of the split nut.  Here it
> is for anyone who would like it.  Also had a link to some Delrin.
>
>
> https://urldefense.proofpoint.com/v2/url?u=https-3A__www.amazon.com_BuyPlastic-2DDelrin-2DAcetal-2DCopolymer-2DPlastic_dp_B08M6GL5J4_ref-3Dsr-5F1-5F1-5Fsspa-3Fcrid-3DW167H062AMGD-26keywords-3DBlack-252BDelrin-26qid-3D1673991547-26sprefix-3Dblack-252Bdelrin-252B-252Caps-252C125-26sr-3D8-2D1-2Dspons-26spLa-3DZW5jcnlwdGVkUXVhbGlmaWVyPUEzS1JRRVA2SUQyMk9SJmVuY3J5cHRlZElkPUEwNjg4NjE1MUI1SUhQWDFIUlVVVSZlbmNyeXB0ZWRBZElkPUEwODEzMTE3M1VGVUlCUTRJRjJJNSZ3aWRnZXROYW1lPXNwX2F0ZiZhY3Rpb249Y2xpY2tSZWRpcmVjdCZkb05vdExvZ0NsaWNrPXRydWU-26th-3D1&d=DwMFaQ&c=euGZstcaTDllvimEN8b7jXrwqOf-v5A_CdpgnVfiiMM&r=EiSmJGnwOotC7uMYII2hfys7Krtpj215bytLA3BUICM&m=WLbg8itsi5LsyJcpmtPfqadu7pagz-HIe0ImQOLk5cg&s=-0eGD1BaqN4DFN2TaxK8AR-iNRoSUDapKZ6fos0ewvU&e=
>
> Mike OK
>
> On 11/6/2022 8:56 PM, timjz...@gmail.com wrote:
>
> Well I finally took the time to make a couple of split nuts from a
> material
>
> referred to as HDPE, a self healing white plastic that actually drills and
>
> taps very nicely.
>
> I took all my measurements from an other split nut. and cut to a size the
>
> block I'd be using. I marked out and drilled the piece with a 11 mm Brad
> point
>
> bit. Then I put in vise and proceeded to tap the ACME thread. Going back
> and
>
> forth continually cleaning it out.
>
> Once I completed that I cut the block in 2 pieces on the scroll saw.
>
> I then marked the hole for the thumb screw and drilled with a 6.5 mm drill
> bit.
>
> Tapping then with a 5/16 course thread tap.
>
> During the drilling process I used the Rocker pen vise.
>
> To trim the Blocks to fit I used the Rockler Small Parts Jig to hold the
> block,
>
> and save the fingers.
>
> Overall I am super happy I took the time to make some and they fit perfect.
>
> there is NO play in that carriage now. Not sure how long they will last,
> but may
>
> make some with Delrin at some point too.
>
> See photos attached.
>
>
>
> Kind regards,
>
>
>
> Tim J Ziegler
>
> Ziegler WoodWork & Specialty
>
> Ziegler Laser Worx
>
> 14171 160th Ave.
>
> Foreston MN 56330
>
>
>
> 320-294-5798 shop
>
> 320-630-2243 cell
>
>
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/3f867fdb-b43a-49c7-a642-b5587d279ba6n%40googlegroups.com
> 
> .
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@

Re: STOP THE PRESS, NEW SPLIT NUT

2023-01-20 Thread M.W.Foscue

And the "Acme thread" specifier is important - don't forget that one.
Mac
-Original Message-
From: 
Sent: Jan 20, 2023 8:46 PM
To: 
Subject: Re: STOP THE PRESS, NEW SPLIT NUT

yup sorry my dumb. was not thinking  on that one. Kind Regards, 
Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell

On Fri, Jan 20, 2023 at 7:20 PM mailto:bulke...@mmnet.com.au)> wrote:
Sorry Tim its 5/8 X 4 tpi acme tap

Bill

From: legacy-ornamental-mills@googlegroups.com 
(mailto:legacy-ornamental-mills@googlegroups.com) 
mailto:legacy-ornamental-mills@googlegroups.com)> On Behalf Of Tim Ziegler
Sent: Saturday, 21 January 2023 12:16 PM
To: legacy-ornamental-mills@googlegroups.com 
(mailto:legacy-ornamental-mills@googlegroups.com)
Subject: Re: STOP THE PRESS, NEW SPLIT NUT

I believe 5/8 8 tpi and right hand.

Kind Regards,

Timothy J. Ziegler

Ziegler WoodWork & Specialty

14171 160th Ave.

Foreston MN 56330

320-294-5798 shop

320-630-2243 cell

On Fri, Jan 20, 2023 at 3:31 PM Eric Johnson mailto:eric.johnson...@gmail.com)> wrote:

What Size tap is that?

On Thu, Jan 19, 2023, 09:23 'Curt George' via Legacy Ornamental Mills 
mailto:legacy-ornamental-mills@googlegroups.com)> wrote:

Mike that is Awesome!

Can you post the file or show us the print?

C.A.G.

On Thursday, January 19, 2023 at 06:19:49 AM EST, Jeff Richmond 
mailto:jtrichmo...@gmail.com)> wrote: 

Awesome, thanks Mike and Cindy, 👍

Jeff from Connecticut 
Sent from my iPhone

On Jan 18, 2023, at 11:17 PM, Okla Mike (Liltwisted) mailto:legacym...@iglide.net)> wrote:

Spoke with Cindy today and she sent a drawing of the split nut.  Here it is for 
anyone who would like it.  Also had a link to some Delrin.
https://urldefense.proofpoint.com/v2/url?u=https-3A__www.amazon.com_BuyPlastic-2DDelrin-2DAcetal-2DCopolymer-2DPlastic_dp_B08M6GL5J4_ref-3Dsr-5F1-5F1-5Fsspa-3Fcrid-3DW167H062AMGD-26keywords-3DBlack-252BDelrin-26qid-3D1673991547-26sprefix-3Dblack-252Bdelrin-252B-252Caps-252C125-26sr-3D8-2D1-2Dspons-26spLa-3DZW5jcnlwdGVkUXVhbGlmaWVyPUEzS1JRRVA2SUQyMk9SJmVuY3J5cHRlZElkPUEwNjg4NjE1MUI1SUhQWDFIUlVVVSZlbmNyeXB0ZWRBZElkPUEwODEzMTE3M1VGVUlCUTRJRjJJNSZ3aWRnZXROYW1lPXNwX2F0ZiZhY3Rpb249Y2xpY2tSZWRpcmVjdCZkb05vdExvZ0NsaWNrPXRydWU-26th-3D1&d=DwMFaQ&c=euGZstcaTDllvimEN8b7jXrwqOf-v5A_CdpgnVfiiMM&r=EiSmJGnwOotC7uMYII2hfys7Krtpj215bytLA3BUICM&m=WLbg8itsi5LsyJcpmtPfqadu7pagz-HIe0ImQOLk5cg&s=-0eGD1BaqN4DFN2TaxK8AR-iNRoSUDapKZ6fos0ewvU&e=
Mike OK
On 11/6/2022 8:56 PM, timjz...@gmail.com (mailto:timjz...@gmail.com) wrote:

Well I finally took the time to make a couple of split nuts from a material  
referred to as HDPE, a self healing white plastic that actually drills and 

taps very nicely. 

I took all my measurements from an other split nut. and cut to a size the 

block I'd be using. I marked out and drilled the piece with a 11 mm Brad point

bit. Then I put in vise and proceeded to tap the ACME thread. Going back and 

forth continually cleaning it out. 

Once I completed that I cut the block in 2 pieces on the scroll saw. 

I then marked the hole for the thumb screw and drilled with a 6.5 mm drill bit.

Tapping then with a 5/16 course thread tap. 

During the drilling process I used the Rocker pen vise. 

To trim the Blocks to fit I used the Rockler Small Parts Jig to hold the block,

and save the fingers. 

Overall I am super happy I took the time to make some and they fit perfect.

there is NO play in that carriage now. Not sure how long they will last, but may

make some with Delrin at some point too. 

See photos attached.

Kind regards,

Tim J Ziegler

Ziegler WoodWork & Specialty

Ziegler Laser Worx

14171 160th Ave.

Foreston MN 56330

320-294-5798 shop

320-630-2243 cell

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
(mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com).
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/3f867fdb-b43a-49c7-a642-b5587d279ba6n%40googlegroups.com.
-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
(mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com).
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/292960e5-88bd-8f95-3885-1db80664a566%40iglide.net.

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com

RE: STOP THE PRESS, NEW SPLIT NUT

2023-01-20 Thread bulkeley

Easy mistake buddy a lot of people even me gets that wrong from time to time 
the 8 tpi acme is common to cnc machines

That’s why your spiralling router bits dia have to be divisible of ¼ inch or 
your multi start spirals won’t work.

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of Tim Ziegler
Sent: Saturday, 21 January 2023 12:46 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: STOP THE PRESS, NEW SPLIT NUT

 

oops I think I answered wrong thanks Bill.




Kind Regards,

 

Timothy J. Ziegler

Ziegler WoodWork & Specialty

14171 160th Ave.

Foreston MN 56330

 

320-294-5798 shop

320-630-2243 cell

 

 

On Fri, Jan 20, 2023 at 7:21 PM mailto:bulke...@mmnet.com.au> > wrote:

5/8 X 4 tpi right hand acme tap 

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
  
mailto:legacy-ornamental-mills@googlegroups.com> > On Behalf Of Eric Johnson
Sent: Saturday, 21 January 2023 8:31 AM
To: legacy-ornamental-mills@googlegroups.com 
 
Subject: Re: STOP THE PRESS, NEW SPLIT NUT

 

What Size tap is that?

 

On Thu, Jan 19, 2023, 09:23 'Curt George' via Legacy Ornamental Mills 
mailto:legacy-ornamental-mills@googlegroups.com> > wrote:

Mike that is Awesome!

 

Can you post the file or show us the print?

 

C.A.G.

 

On Thursday, January 19, 2023 at 06:19:49 AM EST, Jeff Richmond 
mailto:jtrichmo...@gmail.com> > wrote: 

 

 

Awesome, thanks Mike and Cindy, 👍

 

Jeff from Connecticut 
Sent from my iPhone

 

On Jan 18, 2023, at 11:17 PM, Okla Mike (Liltwisted) mailto:legacym...@iglide.net> > wrote:

 

Spoke with Cindy today and she sent a drawing of the split nut.  Here it is for 
anyone who would like it.  Also had a link to some Delrin.

https://urldefense.proofpoint.com/v2/url?u=https-3A__www.amazon.com_BuyPlastic-2DDelrin-2DAcetal-2DCopolymer-2DPlastic_dp_B08M6GL5J4_ref-3Dsr-5F1-5F1-5Fsspa-3Fcrid-3DW167H062AMGD-26keywords-3DBlack-252BDelrin-26qid-3D1673991547-26sprefix-3Dblack-252Bdelrin-252B-252Caps-252C125-26sr-3D8-2D1-2Dspons-26spLa-3DZW5jcnlwdGVkUXVhbGlmaWVyPUEzS1JRRVA2SUQyMk9SJmVuY3J5cHRlZElkPUEwNjg4NjE1MUI1SUhQWDFIUlVVVSZlbmNyeXB0ZWRBZElkPUEwODEzMTE3M1VGVUlCUTRJRjJJNSZ3aWRnZXROYW1lPXNwX2F0ZiZhY3Rpb249Y2xpY2tSZWRpcmVjdCZkb05vdExvZ0NsaWNrPXRydWU-26th-3D1&d=DwMFaQ&c=euGZstcaTDllvimEN8b7jXrwqOf-v5A_CdpgnVfiiMM&r=EiSmJGnwOotC7uMYII2hfys7Krtpj215bytLA3BUICM&m=WLbg8itsi5LsyJcpmtPfqadu7pagz-HIe0ImQOLk5cg&s=-0eGD1BaqN4DFN2TaxK8AR-iNRoSUDapKZ6fos0ewvU&e=

Mike OK

On 11/6/2022 8:56 PM, timjz...@gmail.com   wrote:

Well I finally took the time to make a couple of split nuts from a material  

referred to as HDPE, a self healing white plastic that actually drills and 

taps very nicely. 

I took all my measurements from an other split nut. and cut to a size the 

block I'd be using. I marked out and drilled the piece with a 11 mm Brad point

bit. Then I put in vise and proceeded to tap the ACME thread. Going back and 

forth continually cleaning it out. 

Once I completed that I cut the block in 2 pieces on the scroll saw. 

I then marked the hole for the thumb screw and drilled with a 6.5 mm drill bit.

Tapping then with a 5/16 course thread tap. 

During the drilling process I used the Rocker pen vise. 

To trim the Blocks to fit I used the Rockler Small Parts Jig to hold the block,

and save the fingers. 

Overall I am super happy I took the time to make some and they fit perfect.

there is NO play in that carriage now. Not sure how long they will last, but may

make some with Delrin at some point too. 

See photos attached.

 

Kind regards,

 

Tim J Ziegler

Ziegler WoodWork & Specialty

Ziegler Laser Worx

14171 160th Ave.

Foreston MN 56330

 

320-294-5798 shop

320-630-2243 cell

 

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
 .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/3f867fdb-b43a-49c7-a642-b5587d279ba6n%40googlegroups.com
 

 .

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
 .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/292960e5-88bd-8f95-3885-1db80664a566%40iglide.net

Re: STOP THE PRESS, NEW SPLIT NUT

2023-01-20 Thread Tim Ziegler

yup sorry my dumb. was not thinking  on that one.

Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Fri, Jan 20, 2023 at 7:20 PM  wrote:

> Sorry Tim its 5/8 X 4 tpi acme tap
>
>
>
> Bill
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Tim Ziegler
> *Sent:* Saturday, 21 January 2023 12:16 PM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* Re: STOP THE PRESS, NEW SPLIT NUT
>
>
>
> I believe 5/8 8 tpi and right hand.
>
>
> Kind Regards,
>
>
>
> Timothy J. Ziegler
>
> Ziegler WoodWork & Specialty
>
> 14171 160th Ave.
>
> Foreston MN 56330
>
>
>
> 320-294-5798 shop
>
> 320-630-2243 cell
>
>
>
>
>
> On Fri, Jan 20, 2023 at 3:31 PM Eric Johnson 
> wrote:
>
> What Size tap is that?
>
>
>
> On Thu, Jan 19, 2023, 09:23 'Curt George' via Legacy Ornamental Mills <
> legacy-ornamental-mills@googlegroups.com> wrote:
>
> Mike that is Awesome!
>
>
>
> Can you post the file or show us the print?
>
>
>
> C.A.G.
>
>
>
> On Thursday, January 19, 2023 at 06:19:49 AM EST, Jeff Richmond <
> jtrichmo...@gmail.com> wrote:
>
>
>
>
>
> Awesome, thanks Mike and Cindy, 👍
>
>
>
> Jeff from Connecticut
> Sent from my iPhone
>
>
>
> On Jan 18, 2023, at 11:17 PM, Okla Mike (Liltwisted) <
> legacym...@iglide.net> wrote:
>
> 
>
> Spoke with Cindy today and she sent a drawing of the split nut.  Here it
> is for anyone who would like it.  Also had a link to some Delrin.
>
>
> https://urldefense.proofpoint.com/v2/url?u=https-3A__www.amazon.com_BuyPlastic-2DDelrin-2DAcetal-2DCopolymer-2DPlastic_dp_B08M6GL5J4_ref-3Dsr-5F1-5F1-5Fsspa-3Fcrid-3DW167H062AMGD-26keywords-3DBlack-252BDelrin-26qid-3D1673991547-26sprefix-3Dblack-252Bdelrin-252B-252Caps-252C125-26sr-3D8-2D1-2Dspons-26spLa-3DZW5jcnlwdGVkUXVhbGlmaWVyPUEzS1JRRVA2SUQyMk9SJmVuY3J5cHRlZElkPUEwNjg4NjE1MUI1SUhQWDFIUlVVVSZlbmNyeXB0ZWRBZElkPUEwODEzMTE3M1VGVUlCUTRJRjJJNSZ3aWRnZXROYW1lPXNwX2F0ZiZhY3Rpb249Y2xpY2tSZWRpcmVjdCZkb05vdExvZ0NsaWNrPXRydWU-26th-3D1&d=DwMFaQ&c=euGZstcaTDllvimEN8b7jXrwqOf-v5A_CdpgnVfiiMM&r=EiSmJGnwOotC7uMYII2hfys7Krtpj215bytLA3BUICM&m=WLbg8itsi5LsyJcpmtPfqadu7pagz-HIe0ImQOLk5cg&s=-0eGD1BaqN4DFN2TaxK8AR-iNRoSUDapKZ6fos0ewvU&e=
>
> Mike OK
>
> On 11/6/2022 8:56 PM, timjz...@gmail.com wrote:
>
> Well I finally took the time to make a couple of split nuts from a
> material
>
> referred to as HDPE, a self healing white plastic that actually drills and
>
> taps very nicely.
>
> I took all my measurements from an other split nut. and cut to a size the
>
> block I'd be using. I marked out and drilled the piece with a 11 mm Brad
> point
>
> bit. Then I put in vise and proceeded to tap the ACME thread. Going back
> and
>
> forth continually cleaning it out.
>
> Once I completed that I cut the block in 2 pieces on the scroll saw.
>
> I then marked the hole for the thumb screw and drilled with a 6.5 mm drill
> bit.
>
> Tapping then with a 5/16 course thread tap.
>
> During the drilling process I used the Rocker pen vise.
>
> To trim the Blocks to fit I used the Rockler Small Parts Jig to hold the
> block,
>
> and save the fingers.
>
> Overall I am super happy I took the time to make some and they fit perfect.
>
> there is NO play in that carriage now. Not sure how long they will last,
> but may
>
> make some with Delrin at some point too.
>
> See photos attached.
>
>
>
> Kind regards,
>
>
>
> Tim J Ziegler
>
> Ziegler WoodWork & Specialty
>
> Ziegler Laser Worx
>
> 14171 160th Ave.
>
> Foreston MN 56330
>
>
>
> 320-294-5798 shop
>
> 320-630-2243 cell
>
>
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/3f867fdb-b43a-49c7-a642-b5587d279ba6n%40googlegroups.com
> 
> .
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/292960e5-88bd-8f95-3885-1db80664a566%40iglide.net
> 
> .
>
> 
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@go

Re: STOP THE PRESS, NEW SPLIT NUT

2023-01-20 Thread Tim Ziegler

oops I think I answered wrong thanks Bill.

Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Fri, Jan 20, 2023 at 7:21 PM  wrote:

> 5/8 X 4 tpi right hand acme tap
>
>
>
> Bill
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Eric Johnson
> *Sent:* Saturday, 21 January 2023 8:31 AM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* Re: STOP THE PRESS, NEW SPLIT NUT
>
>
>
> What Size tap is that?
>
>
>
> On Thu, Jan 19, 2023, 09:23 'Curt George' via Legacy Ornamental Mills <
> legacy-ornamental-mills@googlegroups.com> wrote:
>
> Mike that is Awesome!
>
>
>
> Can you post the file or show us the print?
>
>
>
> C.A.G.
>
>
>
> On Thursday, January 19, 2023 at 06:19:49 AM EST, Jeff Richmond <
> jtrichmo...@gmail.com> wrote:
>
>
>
>
>
> Awesome, thanks Mike and Cindy, 👍
>
>
>
> Jeff from Connecticut
> Sent from my iPhone
>
>
>
> On Jan 18, 2023, at 11:17 PM, Okla Mike (Liltwisted) <
> legacym...@iglide.net> wrote:
>
> 
>
> Spoke with Cindy today and she sent a drawing of the split nut.  Here it
> is for anyone who would like it.  Also had a link to some Delrin.
>
>
> https://urldefense.proofpoint.com/v2/url?u=https-3A__www.amazon.com_BuyPlastic-2DDelrin-2DAcetal-2DCopolymer-2DPlastic_dp_B08M6GL5J4_ref-3Dsr-5F1-5F1-5Fsspa-3Fcrid-3DW167H062AMGD-26keywords-3DBlack-252BDelrin-26qid-3D1673991547-26sprefix-3Dblack-252Bdelrin-252B-252Caps-252C125-26sr-3D8-2D1-2Dspons-26spLa-3DZW5jcnlwdGVkUXVhbGlmaWVyPUEzS1JRRVA2SUQyMk9SJmVuY3J5cHRlZElkPUEwNjg4NjE1MUI1SUhQWDFIUlVVVSZlbmNyeXB0ZWRBZElkPUEwODEzMTE3M1VGVUlCUTRJRjJJNSZ3aWRnZXROYW1lPXNwX2F0ZiZhY3Rpb249Y2xpY2tSZWRpcmVjdCZkb05vdExvZ0NsaWNrPXRydWU-26th-3D1&d=DwMFaQ&c=euGZstcaTDllvimEN8b7jXrwqOf-v5A_CdpgnVfiiMM&r=EiSmJGnwOotC7uMYII2hfys7Krtpj215bytLA3BUICM&m=WLbg8itsi5LsyJcpmtPfqadu7pagz-HIe0ImQOLk5cg&s=-0eGD1BaqN4DFN2TaxK8AR-iNRoSUDapKZ6fos0ewvU&e=
>
> Mike OK
>
> On 11/6/2022 8:56 PM, timjz...@gmail.com wrote:
>
> Well I finally took the time to make a couple of split nuts from a
> material
>
> referred to as HDPE, a self healing white plastic that actually drills and
>
> taps very nicely.
>
> I took all my measurements from an other split nut. and cut to a size the
>
> block I'd be using. I marked out and drilled the piece with a 11 mm Brad
> point
>
> bit. Then I put in vise and proceeded to tap the ACME thread. Going back
> and
>
> forth continually cleaning it out.
>
> Once I completed that I cut the block in 2 pieces on the scroll saw.
>
> I then marked the hole for the thumb screw and drilled with a 6.5 mm drill
> bit.
>
> Tapping then with a 5/16 course thread tap.
>
> During the drilling process I used the Rocker pen vise.
>
> To trim the Blocks to fit I used the Rockler Small Parts Jig to hold the
> block,
>
> and save the fingers.
>
> Overall I am super happy I took the time to make some and they fit perfect.
>
> there is NO play in that carriage now. Not sure how long they will last,
> but may
>
> make some with Delrin at some point too.
>
> See photos attached.
>
>
>
> Kind regards,
>
>
>
> Tim J Ziegler
>
> Ziegler WoodWork & Specialty
>
> Ziegler Laser Worx
>
> 14171 160th Ave.
>
> Foreston MN 56330
>
>
>
> 320-294-5798 shop
>
> 320-630-2243 cell
>
>
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/3f867fdb-b43a-49c7-a642-b5587d279ba6n%40googlegroups.com
> 
> .
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/292960e5-88bd-8f95-3885-1db80664a566%40iglide.net
> 
> .
>
> 
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
>
>
> https://groups.google.com/d/msgid/legacy-ornamental-mills/E37F21E9-6856-41EC-BD6A-00739C8238B9%40gmail.com
>

RE: STOP THE PRESS, NEW SPLIT NUT

2023-01-20 Thread bulkeley

5/8 X 4 tpi right hand acme tap 

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of Eric Johnson
Sent: Saturday, 21 January 2023 8:31 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: STOP THE PRESS, NEW SPLIT NUT

 

What Size tap is that?

 

On Thu, Jan 19, 2023, 09:23 'Curt George' via Legacy Ornamental Mills 
mailto:legacy-ornamental-mills@googlegroups.com> > wrote:

Mike that is Awesome!

 

Can you post the file or show us the print?

 

C.A.G.

 

On Thursday, January 19, 2023 at 06:19:49 AM EST, Jeff Richmond 
mailto:jtrichmo...@gmail.com> > wrote: 

 

 

Awesome, thanks Mike and Cindy, 👍

 

Jeff from Connecticut 
Sent from my iPhone





On Jan 18, 2023, at 11:17 PM, Okla Mike (Liltwisted) mailto:legacym...@iglide.net> > wrote:

 

Spoke with Cindy today and she sent a drawing of the split nut.  Here it is for 
anyone who would like it.  Also had a link to some Delrin.

https://urldefense.proofpoint.com/v2/url?u=https-3A__www.amazon.com_BuyPlastic-2DDelrin-2DAcetal-2DCopolymer-2DPlastic_dp_B08M6GL5J4_ref-3Dsr-5F1-5F1-5Fsspa-3Fcrid-3DW167H062AMGD-26keywords-3DBlack-252BDelrin-26qid-3D1673991547-26sprefix-3Dblack-252Bdelrin-252B-252Caps-252C125-26sr-3D8-2D1-2Dspons-26spLa-3DZW5jcnlwdGVkUXVhbGlmaWVyPUEzS1JRRVA2SUQyMk9SJmVuY3J5cHRlZElkPUEwNjg4NjE1MUI1SUhQWDFIUlVVVSZlbmNyeXB0ZWRBZElkPUEwODEzMTE3M1VGVUlCUTRJRjJJNSZ3aWRnZXROYW1lPXNwX2F0ZiZhY3Rpb249Y2xpY2tSZWRpcmVjdCZkb05vdExvZ0NsaWNrPXRydWU-26th-3D1&d=DwMFaQ&c=euGZstcaTDllvimEN8b7jXrwqOf-v5A_CdpgnVfiiMM&r=EiSmJGnwOotC7uMYII2hfys7Krtpj215bytLA3BUICM&m=WLbg8itsi5LsyJcpmtPfqadu7pagz-HIe0ImQOLk5cg&s=-0eGD1BaqN4DFN2TaxK8AR-iNRoSUDapKZ6fos0ewvU&e=

Mike OK

On 11/6/2022 8:56 PM, timjz...@gmail.com   wrote:

Well I finally took the time to make a couple of split nuts from a material  

referred to as HDPE, a self healing white plastic that actually drills and 

taps very nicely. 

I took all my measurements from an other split nut. and cut to a size the 

block I'd be using. I marked out and drilled the piece with a 11 mm Brad point

bit. Then I put in vise and proceeded to tap the ACME thread. Going back and 

forth continually cleaning it out. 

Once I completed that I cut the block in 2 pieces on the scroll saw. 

I then marked the hole for the thumb screw and drilled with a 6.5 mm drill bit.

Tapping then with a 5/16 course thread tap. 

During the drilling process I used the Rocker pen vise. 

To trim the Blocks to fit I used the Rockler Small Parts Jig to hold the block,

and save the fingers. 

Overall I am super happy I took the time to make some and they fit perfect.

there is NO play in that carriage now. Not sure how long they will last, but may

make some with Delrin at some point too. 

See photos attached.

 

Kind regards,

 

Tim J Ziegler

Ziegler WoodWork & Specialty

Ziegler Laser Worx

14171 160th Ave.

Foreston MN 56330

 

320-294-5798 shop

320-630-2243 cell

 

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
 .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/3f867fdb-b43a-49c7-a642-b5587d279ba6n%40googlegroups.com
 

 .

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
 .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/292960e5-88bd-8f95-3885-1db80664a566%40iglide.net
 

 .



-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
 .
To view this discussion on the web visit 

https://groups.google.com/d/msgid/legacy-ornamental-mills/E37F21E9-6856-41EC-BD6A-00739C8238B9%40gmail.com
 

 

.

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an ema

RE: STOP THE PRESS, NEW SPLIT NUT

2023-01-20 Thread bulkeley

Sorry Tim its 5/8 X 4 tpi acme tap

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of Tim Ziegler
Sent: Saturday, 21 January 2023 12:16 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: STOP THE PRESS, NEW SPLIT NUT

 

I believe 5/8 8 tpi and right hand.




Kind Regards,

 

Timothy J. Ziegler

Ziegler WoodWork & Specialty

14171 160th Ave.

Foreston MN 56330

 

320-294-5798 shop

320-630-2243 cell

 

 

On Fri, Jan 20, 2023 at 3:31 PM Eric Johnson mailto:eric.johnson...@gmail.com> > wrote:

What Size tap is that?

 

On Thu, Jan 19, 2023, 09:23 'Curt George' via Legacy Ornamental Mills 
mailto:legacy-ornamental-mills@googlegroups.com> > wrote:

Mike that is Awesome!

 

Can you post the file or show us the print?

 

C.A.G.

 

On Thursday, January 19, 2023 at 06:19:49 AM EST, Jeff Richmond 
mailto:jtrichmo...@gmail.com> > wrote: 

 

 

Awesome, thanks Mike and Cindy, 👍

 

Jeff from Connecticut 
Sent from my iPhone





On Jan 18, 2023, at 11:17 PM, Okla Mike (Liltwisted) mailto:legacym...@iglide.net> > wrote:

 

Spoke with Cindy today and she sent a drawing of the split nut.  Here it is for 
anyone who would like it.  Also had a link to some Delrin.

https://urldefense.proofpoint.com/v2/url?u=https-3A__www.amazon.com_BuyPlastic-2DDelrin-2DAcetal-2DCopolymer-2DPlastic_dp_B08M6GL5J4_ref-3Dsr-5F1-5F1-5Fsspa-3Fcrid-3DW167H062AMGD-26keywords-3DBlack-252BDelrin-26qid-3D1673991547-26sprefix-3Dblack-252Bdelrin-252B-252Caps-252C125-26sr-3D8-2D1-2Dspons-26spLa-3DZW5jcnlwdGVkUXVhbGlmaWVyPUEzS1JRRVA2SUQyMk9SJmVuY3J5cHRlZElkPUEwNjg4NjE1MUI1SUhQWDFIUlVVVSZlbmNyeXB0ZWRBZElkPUEwODEzMTE3M1VGVUlCUTRJRjJJNSZ3aWRnZXROYW1lPXNwX2F0ZiZhY3Rpb249Y2xpY2tSZWRpcmVjdCZkb05vdExvZ0NsaWNrPXRydWU-26th-3D1&d=DwMFaQ&c=euGZstcaTDllvimEN8b7jXrwqOf-v5A_CdpgnVfiiMM&r=EiSmJGnwOotC7uMYII2hfys7Krtpj215bytLA3BUICM&m=WLbg8itsi5LsyJcpmtPfqadu7pagz-HIe0ImQOLk5cg&s=-0eGD1BaqN4DFN2TaxK8AR-iNRoSUDapKZ6fos0ewvU&e=

Mike OK

On 11/6/2022 8:56 PM, timjz...@gmail.com   wrote:

Well I finally took the time to make a couple of split nuts from a material  

referred to as HDPE, a self healing white plastic that actually drills and 

taps very nicely. 

I took all my measurements from an other split nut. and cut to a size the 

block I'd be using. I marked out and drilled the piece with a 11 mm Brad point

bit. Then I put in vise and proceeded to tap the ACME thread. Going back and 

forth continually cleaning it out. 

Once I completed that I cut the block in 2 pieces on the scroll saw. 

I then marked the hole for the thumb screw and drilled with a 6.5 mm drill bit.

Tapping then with a 5/16 course thread tap. 

During the drilling process I used the Rocker pen vise. 

To trim the Blocks to fit I used the Rockler Small Parts Jig to hold the block,

and save the fingers. 

Overall I am super happy I took the time to make some and they fit perfect.

there is NO play in that carriage now. Not sure how long they will last, but may

make some with Delrin at some point too. 

See photos attached.

 

Kind regards,

 

Tim J Ziegler

Ziegler WoodWork & Specialty

Ziegler Laser Worx

14171 160th Ave.

Foreston MN 56330

 

320-294-5798 shop

320-630-2243 cell

 

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
 .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/3f867fdb-b43a-49c7-a642-b5587d279ba6n%40googlegroups.com
 

 .

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
 .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/292960e5-88bd-8f95-3885-1db80664a566%40iglide.net
 

 .



-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
 .
To view this discussion on the web visit 

https://groups.google.com/d/msgid/legacy-ornamental-mills/E37F21E9-6856-41EC-BD6A-00739C8238B9%40gmail.com

Re: STOP THE PRESS, NEW SPLIT NUT

2023-01-20 Thread Tim Ziegler

I believe 5/8 8 tpi and right hand.

Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Fri, Jan 20, 2023 at 3:31 PM Eric Johnson 
wrote:

> What Size tap is that?
>
> On Thu, Jan 19, 2023, 09:23 'Curt George' via Legacy Ornamental Mills <
> legacy-ornamental-mills@googlegroups.com> wrote:
>
>> Mike that is Awesome!
>>
>> Can you post the file or show us the print?
>>
>> C.A.G.
>>
>> On Thursday, January 19, 2023 at 06:19:49 AM EST, Jeff Richmond <
>> jtrichmo...@gmail.com> wrote:
>>
>>
>> Awesome, thanks Mike and Cindy, 👍
>>
>> Jeff from Connecticut
>> Sent from my iPhone
>>
>> On Jan 18, 2023, at 11:17 PM, Okla Mike (Liltwisted) <
>> legacym...@iglide.net> wrote:
>>
>> 
>>
>> Spoke with Cindy today and she sent a drawing of the split nut.  Here it
>> is for anyone who would like it.  Also had a link to some Delrin.
>>
>>
>> https://urldefense.proofpoint.com/v2/url?u=https-3A__www.amazon.com_BuyPlastic-2DDelrin-2DAcetal-2DCopolymer-2DPlastic_dp_B08M6GL5J4_ref-3Dsr-5F1-5F1-5Fsspa-3Fcrid-3DW167H062AMGD-26keywords-3DBlack-252BDelrin-26qid-3D1673991547-26sprefix-3Dblack-252Bdelrin-252B-252Caps-252C125-26sr-3D8-2D1-2Dspons-26spLa-3DZW5jcnlwdGVkUXVhbGlmaWVyPUEzS1JRRVA2SUQyMk9SJmVuY3J5cHRlZElkPUEwNjg4NjE1MUI1SUhQWDFIUlVVVSZlbmNyeXB0ZWRBZElkPUEwODEzMTE3M1VGVUlCUTRJRjJJNSZ3aWRnZXROYW1lPXNwX2F0ZiZhY3Rpb249Y2xpY2tSZWRpcmVjdCZkb05vdExvZ0NsaWNrPXRydWU-26th-3D1&d=DwMFaQ&c=euGZstcaTDllvimEN8b7jXrwqOf-v5A_CdpgnVfiiMM&r=EiSmJGnwOotC7uMYII2hfys7Krtpj215bytLA3BUICM&m=WLbg8itsi5LsyJcpmtPfqadu7pagz-HIe0ImQOLk5cg&s=-0eGD1BaqN4DFN2TaxK8AR-iNRoSUDapKZ6fos0ewvU&e=
>>
>> Mike OK
>> On 11/6/2022 8:56 PM, timjz...@gmail.com wrote:
>>
>> Well I finally took the time to make a couple of split nuts from a
>> material
>> referred to as HDPE, a self healing white plastic that actually drills
>> and
>> taps very nicely.
>> I took all my measurements from an other split nut. and cut to a size the
>> block I'd be using. I marked out and drilled the piece with a 11 mm Brad
>> point
>> bit. Then I put in vise and proceeded to tap the ACME thread. Going back
>> and
>> forth continually cleaning it out.
>> Once I completed that I cut the block in 2 pieces on the scroll saw.
>> I then marked the hole for the thumb screw and drilled with a 6.5 mm
>> drill bit.
>> Tapping then with a 5/16 course thread tap.
>> During the drilling process I used the Rocker pen vise.
>> To trim the Blocks to fit I used the Rockler Small Parts Jig to hold the
>> block,
>> and save the fingers.
>> Overall I am super happy I took the time to make some and they fit
>> perfect.
>> there is NO play in that carriage now. Not sure how long they will last,
>> but may
>> make some with Delrin at some point too.
>> See photos attached.
>>
>> Kind regards,
>>
>> Tim J Ziegler
>> Ziegler WoodWork & Specialty
>> Ziegler Laser Worx
>> 14171 160th Ave.
>> Foreston MN 56330
>>
>> 320-294-5798 shop
>> 320-630-2243 cell
>>
>> --
>> You received this message because you are subscribed to the Google Groups
>> "Legacy Ornamental Mills" group.
>> To unsubscribe from this group and stop receiving emails from it, send an
>> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
>> To view this discussion on the web visit
>> https://groups.google.com/d/msgid/legacy-ornamental-mills/3f867fdb-b43a-49c7-a642-b5587d279ba6n%40googlegroups.com
>> 
>> .
>>
>> --
>> You received this message because you are subscribed to the Google Groups
>> "Legacy Ornamental Mills" group.
>> To unsubscribe from this group and stop receiving emails from it, send an
>> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
>> To view this discussion on the web visit
>> https://groups.google.com/d/msgid/legacy-ornamental-mills/292960e5-88bd-8f95-3885-1db80664a566%40iglide.net
>> 
>> .
>> 
>>
>> --
>> You received this message because you are subscribed to the Google Groups
>> "Legacy Ornamental Mills" group.
>> To unsubscribe from this group and stop receiving emails from it, send an
>> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
>> To view this discussion on the web visit
>>
>> https://groups.google.com/d/msgid/legacy-ornamental-mills/E37F21E9-6856-41EC-BD6A-00739C8238B9%40gmail.com
>> 
>> .
>>
>> --
>> You received this message because you are subscribed to the Google Groups
>> "Legacy Ornamental Mills" group.
>> To unsubscribe from this group and stop receiving emails from it, send an
>> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
>> To view t

Re: 🔴 Couple of Bunkys just started a Premiere: Legacy Ornamental Mill Making a rope twist cane #walkingstick

2023-01-20 Thread Tim Ziegler

exactly Rick nicely put.

Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Fri, Jan 20, 2023 at 2:19 PM Rick Hutley  wrote:

> Ah but yours are good Bill - very good. You describe (and show) every
> step, which is essential with something as complex as some of your Legacy
> creations. What frustrates me me about ‘typical’ YouTube videos are those
> that show the same, often simple, step over and over at normal speed. E.g.
> I don’t need to see someone take several minutes to insert 14+ screws into
> a board - one (or at a push, two) would suffice. Your Legacy pieces, by
> contrast, often involve intricate, non-repetitive actions and you, taking
> your time to show us exactly what/how you do things, at normal speed, is
> highly valuable.
>
> Don’t stop!!
>
> Rick
>
> On Jan 20, 2023, at 14:44, bulke...@mmnet.com.au wrote:
>
> 
>
> Oh well like I always say I make legacy videos but I never said they are
> good videos lol
>
>
>
> Bill
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Tim Ziegler
> *Sent:* Saturday, 21 January 2023 2:18 AM
> *To:* LOM Group 
> *Subject:* Re: 🔴 Couple of Bunkys just started a Premiere: Legacy
> Ornamental Mill Making a rope twist cane #walkingstick
>
>
>
> Hey Bill we're not letting you off the hook that easy. You've way over 20
> years experience on LOM's, we still need you.
>
>
>
>
>
>
>
> On Fri, Jan 20, 2023, 7:36 AM  wrote:
>
> At last somebody that can make legacy videos better than me now I don’t
> have to make them
>
>
>
> Bill
>
>
>
>
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Rick Hutley
> *Sent:* Friday, 20 January 2023 8:47 PM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* Re: 🔴 Couple of Bunkys just started a Premiere: Legacy
> Ornamental Mill Making a rope twist cane #walkingstick
>
>
>
> Subscribed - great videos. I love the speed of the videos, with voice
> description overlays. I get very frustrated by the ‘usual’ videos one
> finds, where they repeat every step at normal speed - after seeing someone
> cut one board, I don’t then need to see them repeat it for the other 3
> sides of the box - well, not at normal speed. You do it in fast mode and
> describe at normal speed: all 4 sides demonstrated in the timeline of one
> side. Excellent 😊
>
>
>
> Rick
>
>
>
> On Jan 19, 2023, at 21:57, Tim Woodard  wrote:
>
> 
>
> Thanks for sharing. my wife and I are Couple of bunkys on youtube please
> consider subscribing we do a new project every Thursday. check us out
> https://www.youtube.com/@CoupleofBunkies
>
>
>
> On Thu, Jan 19, 2023 at 9:49 PM Tim Ziegler  wrote:
>
> Here you go guys eat it up.
>
> New LOM owner having fun.
>
>
> Kind Regards,
>
>
>
> Timothy J. Ziegler
>
> Ziegler WoodWork & Specialty
>
> 14171 160th Ave.
>
> Foreston MN 56330
>
>
>
> 320-294-5798 shop
>
> 320-630-2243 cell
>
>
>
> -- Forwarded message -
> From: *YouTube* 
> Date: Thu, Jan 19, 2023 at 5:00 PM
> Subject: 🔴 Couple of Bunkys just started a Premiere: Legacy Ornamental
> Mill Making a rope twist cane #walkingstick
> To: Tim Ziegler 
>
>
>
> Live on YouTube: Couple of Bunkys - Legacy Ornamental Mill Making a rope
> twist cane #walkingstick!
>
> [image: Youtube Logo]
> 
> --
>
> [image: Legacy Ornamental Mill Making a rope twist cane #walkingstick]
>
> PREMIERE
>
>
> 
>
> Legacy Ornamental Mill Making a rope twist cane #walkingstick
> 
>
> Couple of Bunkys
> 
> --
>
> You were sent this email because you chose to receive updates from Couple
> of Bunkys
> .
>
>
> © 2023 YouTube, LLC 901 Cherry Ave, San Bruno, CA 94066
>
> [image: YouTube]
> 
>
> [image: Twitter] 
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the we

Re: 🔴 Couple of Bunkys just started a Premiere: Legacy Ornamental Mill Making a rope twist cane #walkingstick

2023-01-20 Thread Tim Ziegler

pretty sure everyone thinks they are great
Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Fri, Jan 20, 2023 at 1:44 PM  wrote:

> Oh well like I always say I make legacy videos but I never said they are
> good videos lol
>
>
>
> Bill
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Tim Ziegler
> *Sent:* Saturday, 21 January 2023 2:18 AM
> *To:* LOM Group 
> *Subject:* Re: 🔴 Couple of Bunkys just started a Premiere: Legacy
> Ornamental Mill Making a rope twist cane #walkingstick
>
>
>
> Hey Bill we're not letting you off the hook that easy. You've way over 20
> years experience on LOM's, we still need you.
>
>
>
>
>
>
>
> On Fri, Jan 20, 2023, 7:36 AM  wrote:
>
> At last somebody that can make legacy videos better than me now I don’t
> have to make them
>
>
>
> Bill
>
>
>
>
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Rick Hutley
> *Sent:* Friday, 20 January 2023 8:47 PM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* Re: 🔴 Couple of Bunkys just started a Premiere: Legacy
> Ornamental Mill Making a rope twist cane #walkingstick
>
>
>
> Subscribed - great videos. I love the speed of the videos, with voice
> description overlays. I get very frustrated by the ‘usual’ videos one
> finds, where they repeat every step at normal speed - after seeing someone
> cut one board, I don’t then need to see them repeat it for the other 3
> sides of the box - well, not at normal speed. You do it in fast mode and
> describe at normal speed: all 4 sides demonstrated in the timeline of one
> side. Excellent 😊
>
>
>
> Rick
>
>
>
> On Jan 19, 2023, at 21:57, Tim Woodard  wrote:
>
> 
>
> Thanks for sharing. my wife and I are Couple of bunkys on youtube please
> consider subscribing we do a new project every Thursday. check us out
> https://www.youtube.com/@CoupleofBunkies
>
>
>
> On Thu, Jan 19, 2023 at 9:49 PM Tim Ziegler  wrote:
>
> Here you go guys eat it up.
>
> New LOM owner having fun.
>
>
> Kind Regards,
>
>
>
> Timothy J. Ziegler
>
> Ziegler WoodWork & Specialty
>
> 14171 160th Ave.
>
> Foreston MN 56330
>
>
>
> 320-294-5798 shop
>
> 320-630-2243 cell
>
>
>
> -- Forwarded message -
> From: *YouTube* 
> Date: Thu, Jan 19, 2023 at 5:00 PM
> Subject: 🔴 Couple of Bunkys just started a Premiere: Legacy Ornamental
> Mill Making a rope twist cane #walkingstick
> To: Tim Ziegler 
>
>
>
> Live on YouTube: Couple of Bunkys - Legacy Ornamental Mill Making a rope
> twist cane #walkingstick!
>
> [image: Youtube Logo]
> 
> --
>
> [image: Legacy Ornamental Mill Making a rope twist cane #walkingstick]
>
> PREMIERE
>
>
> 
>
> Legacy Ornamental Mill Making a rope twist cane #walkingstick
> 
>
> Couple of Bunkys
> 
> --
>
> You were sent this email because you chose to receive updates from Couple
> of Bunkys
> .
>
>
> © 2023 YouTube, LLC 901 Cherry Ave, San Bruno, CA 94066
>
> [image: YouTube]
> 
>
> [image: Twitter] 
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLGJh047ar3siPsPqw3RYi80bQJZi7dOGrpCWOewc68t2Q%40mail.gmail.com
> 
> .
>
>
>
>
> --
>
> Timothy Lee Woodard
>
> E: twoodard...@gmail.com
>
> C: (757) 399-9778
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://grou

Re: STOP THE PRESS, NEW SPLIT NUT

2023-01-20 Thread Eric Johnson

What Size tap is that?

On Thu, Jan 19, 2023, 09:23 'Curt George' via Legacy Ornamental Mills <
legacy-ornamental-mills@googlegroups.com> wrote:

> Mike that is Awesome!
>
> Can you post the file or show us the print?
>
> C.A.G.
>
> On Thursday, January 19, 2023 at 06:19:49 AM EST, Jeff Richmond <
> jtrichmo...@gmail.com> wrote:
>
>
> Awesome, thanks Mike and Cindy, 👍
>
> Jeff from Connecticut
> Sent from my iPhone
>
> On Jan 18, 2023, at 11:17 PM, Okla Mike (Liltwisted) <
> legacym...@iglide.net> wrote:
>
> 
>
> Spoke with Cindy today and she sent a drawing of the split nut.  Here it
> is for anyone who would like it.  Also had a link to some Delrin.
>
>
> https://urldefense.proofpoint.com/v2/url?u=https-3A__www.amazon.com_BuyPlastic-2DDelrin-2DAcetal-2DCopolymer-2DPlastic_dp_B08M6GL5J4_ref-3Dsr-5F1-5F1-5Fsspa-3Fcrid-3DW167H062AMGD-26keywords-3DBlack-252BDelrin-26qid-3D1673991547-26sprefix-3Dblack-252Bdelrin-252B-252Caps-252C125-26sr-3D8-2D1-2Dspons-26spLa-3DZW5jcnlwdGVkUXVhbGlmaWVyPUEzS1JRRVA2SUQyMk9SJmVuY3J5cHRlZElkPUEwNjg4NjE1MUI1SUhQWDFIUlVVVSZlbmNyeXB0ZWRBZElkPUEwODEzMTE3M1VGVUlCUTRJRjJJNSZ3aWRnZXROYW1lPXNwX2F0ZiZhY3Rpb249Y2xpY2tSZWRpcmVjdCZkb05vdExvZ0NsaWNrPXRydWU-26th-3D1&d=DwMFaQ&c=euGZstcaTDllvimEN8b7jXrwqOf-v5A_CdpgnVfiiMM&r=EiSmJGnwOotC7uMYII2hfys7Krtpj215bytLA3BUICM&m=WLbg8itsi5LsyJcpmtPfqadu7pagz-HIe0ImQOLk5cg&s=-0eGD1BaqN4DFN2TaxK8AR-iNRoSUDapKZ6fos0ewvU&e=
>
> Mike OK
> On 11/6/2022 8:56 PM, timjz...@gmail.com wrote:
>
> Well I finally took the time to make a couple of split nuts from a
> material
> referred to as HDPE, a self healing white plastic that actually drills and
> taps very nicely.
> I took all my measurements from an other split nut. and cut to a size the
> block I'd be using. I marked out and drilled the piece with a 11 mm Brad
> point
> bit. Then I put in vise and proceeded to tap the ACME thread. Going back
> and
> forth continually cleaning it out.
> Once I completed that I cut the block in 2 pieces on the scroll saw.
> I then marked the hole for the thumb screw and drilled with a 6.5 mm drill
> bit.
> Tapping then with a 5/16 course thread tap.
> During the drilling process I used the Rocker pen vise.
> To trim the Blocks to fit I used the Rockler Small Parts Jig to hold the
> block,
> and save the fingers.
> Overall I am super happy I took the time to make some and they fit perfect.
> there is NO play in that carriage now. Not sure how long they will last,
> but may
> make some with Delrin at some point too.
> See photos attached.
>
> Kind regards,
>
> Tim J Ziegler
> Ziegler WoodWork & Specialty
> Ziegler Laser Worx
> 14171 160th Ave.
> Foreston MN 56330
>
> 320-294-5798 shop
> 320-630-2243 cell
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/3f867fdb-b43a-49c7-a642-b5587d279ba6n%40googlegroups.com
> 
> .
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/292960e5-88bd-8f95-3885-1db80664a566%40iglide.net
> 
> .
> 
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
>
> https://groups.google.com/d/msgid/legacy-ornamental-mills/E37F21E9-6856-41EC-BD6A-00739C8238B9%40gmail.com
> 
> .
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/1325782007.1293923.1674138200579%40mail.yahoo.com
> 
> .
>

-- 
You received this message because you are su

RE: 🔴 Couple of Bunkys just started a Premiere: Legacy Ornamental Mill Making a rope twist cane #walkingstick

2023-01-20 Thread bulkeley

Well thank you sir for your kind words, my idea was to make videos that people 
can follow along at the same time

Sort of like those cooking shows you see on tv and if it’s a bit too long 
winded or your more experienced  click on the settings button and increase the 
playback speed

That way hopefully most watchers are happy. I also don’t talk on my videos for 
2 reasons, one accents not everyone can understand a

Australian accent and I’m a terrible public speaker but most people can read it 
lol and 2 when you run at faster speed with the music turned down you can still 
understand what is going on by reading . Steven Spielberg I’m not  lol but I do 
try to cover all the bases. And I’m willing to hand over the reigns  any time 
someone else wants to do it, I just did videos because no one else was doing 
legacy ones and the group was missing out

I don’t enjoy making them at all.

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of Rick Hutley
Sent: Saturday, 21 January 2023 7:19 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: 🔴 Couple of Bunkys just started a Premiere: Legacy Ornamental Mill 
Making a rope twist cane #walkingstick

 

Ah but yours are good Bill - very good. You describe (and show) every step, 
which is essential with something as complex as some of your Legacy creations. 
What frustrates me me about ‘typical’ YouTube videos are those that show the 
same, often simple, step over and over at normal speed. E.g. I don’t need to 
see someone take several minutes to insert 14+ screws into a board - one (or at 
a push, two) would suffice. Your Legacy pieces, by contrast, often involve 
intricate, non-repetitive actions and you, taking your time to show us exactly 
what/how you do things, at normal speed, is highly valuable.

 

Don’t stop!!

 

Rick





On Jan 20, 2023, at 14:44, bulke...@mmnet.com.au  
 wrote:



Oh well like I always say I make legacy videos but I never said they are good 
videos lol

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
  
mailto:legacy-ornamental-mills@googlegroups.com> > On Behalf Of Tim Ziegler
Sent: Saturday, 21 January 2023 2:18 AM
To: LOM Group mailto:legacy-ornamental-mills@googlegroups.com> >
Subject: Re: 🔴 Couple of Bunkys just started a Premiere: Legacy Ornamental Mill 
Making a rope twist cane #walkingstick

 

Hey Bill we're not letting you off the hook that easy. You've way over 20 years 
experience on LOM's, we still need you. 

 

 

 

On Fri, Jan 20, 2023, 7:36 AM mailto:bulke...@mmnet.com.au> > wrote:

At last somebody that can make legacy videos better than me now I don’t have to 
make them 

 

Bill

 

 

 

From: legacy-ornamental-mills@googlegroups.com 
  
mailto:legacy-ornamental-mills@googlegroups.com> > On Behalf Of Rick Hutley
Sent: Friday, 20 January 2023 8:47 PM
To: legacy-ornamental-mills@googlegroups.com 
 
Subject: Re: 🔴 Couple of Bunkys just started a Premiere: Legacy Ornamental Mill 
Making a rope twist cane #walkingstick

 

Subscribed - great videos. I love the speed of the videos, with voice 
description overlays. I get very frustrated by the ‘usual’ videos one finds, 
where they repeat every step at normal speed - after seeing someone cut one 
board, I don’t then need to see them repeat it for the other 3 sides of the box 
- well, not at normal speed. You do it in fast mode and describe at normal 
speed: all 4 sides demonstrated in the timeline of one side. Excellent 😊

 

Rick

 

On Jan 19, 2023, at 21:57, Tim Woodard mailto:twoodard...@gmail.com> > wrote:



Thanks for sharing. my wife and I are Couple of bunkys on youtube please 
consider subscribing we do a new project every Thursday. check us out 
https://www.youtube.com/@CoupleofBunkies

 

On Thu, Jan 19, 2023 at 9:49 PM Tim Ziegler mailto:timjzieg...@gmail.com> > wrote:

Here you go guys eat it up. 

New LOM owner having fun.




Kind Regards,

 

Timothy J. Ziegler

Ziegler WoodWork & Specialty

14171 160th Ave.

Foreston MN 56330

 

320-294-5798 shop

320-630-2243 cell

 

-- Forwarded message -
From: YouTube mailto:nore...@youtube.com> >
Date: Thu, Jan 19, 2023 at 5:00 PM
Subject: 🔴 Couple of Bunkys just started a Premiere: Legacy Ornamental Mill 
Making a rope twist cane #walkingstick
To: Tim Ziegler mailto:timjzieg...@gmail.com> >

 

Live on YouTube: Couple of Bunkys - Legacy Ornamental Mill Making a rope twist 
cane #walkingstick! 




  


  _  






   


PREMIERE

Re: 🔴 Couple of Bunkys just started a Premiere: Legacy Ornamental Mill Making a rope twist cane #walkingstick

2023-01-20 Thread Rick Hutley

Ah but yours are good Bill - very good. You describe (and show) every step, which is essential with something as complex as some of your Legacy creations. What frustrates me me about ‘typical’ YouTube videos are those that show the same, often simple, step over and over at normal speed. E.g. I don’t need to see someone take several minutes to insert 14+ screws into a board - one (or at a push, two) would suffice. Your Legacy pieces, by contrast, often involve intricate, non-repetitive actions and you, taking your time to show us exactly what/how you do things, at normal speed, is highly valuable.Don’t stop!!RickOn Jan 20, 2023, at 14:44, bulke...@mmnet.com.au wrote:Oh well like I always say I make legacy videos but I never said they are good videos lol Bill From: legacy-ornamental-mills@googlegroups.com  On Behalf Of Tim ZieglerSent: Saturday, 21 January 2023 2:18 AMTo: LOM Group Subject: Re: 🔴 Couple of Bunkys just started a Premiere: Legacy Ornamental Mill Making a rope twist cane #walkingstick Hey Bill we're not letting you off the hook that easy. You've way over 20 years experience on LOM's, we still need you.On Fri, Jan 20, 2023, 7:36 AM  wrote:At last somebody that can make legacy videos better than me now I don’t have to make them  Bill   From: legacy-ornamental-mills@googlegroups.com  On Behalf Of Rick HutleySent: Friday, 20 January 2023 8:47 PMTo: legacy-ornamental-mills@googlegroups.comSubject: Re: 🔴 Couple of Bunkys just started a Premiere: Legacy Ornamental Mill Making a rope twist cane #walkingstick Subscribed - great videos. I love the speed of the videos, with voice description overlays. I get very frustrated by the ‘usual’ videos one finds, where they repeat every step at normal speed - after seeing someone cut one board, I don’t then need to see them repeat it for the other 3 sides of the box - well, not at normal speed. You do it in fast mode and describe at normal speed: all 4 sides demonstrated in the timeline of one side. Excellent 😊 Rick On Jan 19, 2023, at 21:57, Tim Woodard  wrote:Thanks for sharing. my wife and I are Couple of bunkys on youtube please consider subscribing we do a new project every Thursday. check us out https://www.youtube.com/@CoupleofBunkies On Thu, Jan 19, 2023 at 9:49 PM Tim Ziegler  wrote:Here you go guys eat it up. New LOM owner having fun.Kind Regards, Timothy J. ZieglerZiegler WoodWork & Specialty14171 160th Ave.Foreston MN 56330 320-294-5798 shop320-630-2243 cell -- Forwarded message -From: YouTube Date: Thu, Jan 19, 2023 at 5:00 PMSubject: 🔴 Couple of Bunkys just started a Premiere: Legacy Ornamental Mill Making a rope twist cane #walkingstickTo: Tim Ziegler  Live on YouTube: Couple of Bunkys - Legacy Ornamental Mill Making a rope twist cane #walkingstick! PREMIERELegacy Ornamental Mill Making a rope twist cane #walkingstick Couple of Bunkys You were sent this email because you chose to receive updates from Couple of Bunkys. © 2023 YouTube, LLC 901 Cherry Ave, San Bruno, CA 94066 -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group.To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com.To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLGJh047ar3siPsPqw3RYi80bQJZi7dOGrpCWOewc68t2Q%40mail.gmail.com. -- Timothy Lee WoodardE: twoodard...@gmail.comC: (757) 399-9778-- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group.To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com.To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/CAC6wDbWnGAnSPMCQziXPGXTtb1Y0uutfAAuYJNF%2BXJti8jaJvw%40mail.gmail.com.-- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group.To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com.To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/32163815-A31C-44B5-AA76-50A237C9D7CF%40gmail.com.-- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group.To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com.To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/000301d92cd4%2421f47ca0%2465dd75e0%24%40mmnet.com.au.-- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group.To unsubscribe from this group and stop receiv

RE: 🔴 Couple of Bunkys just started a Premiere: Legacy Ornamental Mill Making a rope twist cane #walkingstick

2023-01-20 Thread bulkeley

Oh well like I always say I make legacy videos but I never said they are good 
videos lol

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of Tim Ziegler
Sent: Saturday, 21 January 2023 2:18 AM
To: LOM Group 
Subject: Re: 🔴 Couple of Bunkys just started a Premiere: Legacy Ornamental Mill 
Making a rope twist cane #walkingstick

 

Hey Bill we're not letting you off the hook that easy. You've way over 20 years 
experience on LOM's, we still need you. 

 

 

 

On Fri, Jan 20, 2023, 7:36 AM mailto:bulke...@mmnet.com.au> > wrote:

At last somebody that can make legacy videos better than me now I don’t have to 
make them 

 

Bill

 

 

 

From: legacy-ornamental-mills@googlegroups.com 
  
mailto:legacy-ornamental-mills@googlegroups.com> > On Behalf Of Rick Hutley
Sent: Friday, 20 January 2023 8:47 PM
To: legacy-ornamental-mills@googlegroups.com 
 
Subject: Re: 🔴 Couple of Bunkys just started a Premiere: Legacy Ornamental Mill 
Making a rope twist cane #walkingstick

 

Subscribed - great videos. I love the speed of the videos, with voice 
description overlays. I get very frustrated by the ‘usual’ videos one finds, 
where they repeat every step at normal speed - after seeing someone cut one 
board, I don’t then need to see them repeat it for the other 3 sides of the box 
- well, not at normal speed. You do it in fast mode and describe at normal 
speed: all 4 sides demonstrated in the timeline of one side. Excellent 😊

 

Rick

 

On Jan 19, 2023, at 21:57, Tim Woodard mailto:twoodard...@gmail.com> > wrote:



Thanks for sharing. my wife and I are Couple of bunkys on youtube please 
consider subscribing we do a new project every Thursday. check us out 
https://www.youtube.com/@CoupleofBunkies

 

On Thu, Jan 19, 2023 at 9:49 PM Tim Ziegler mailto:timjzieg...@gmail.com> > wrote:

Here you go guys eat it up. 

New LOM owner having fun.




Kind Regards,

 

Timothy J. Ziegler

Ziegler WoodWork & Specialty

14171 160th Ave.

Foreston MN 56330

 

320-294-5798 shop

320-630-2243 cell

 

-- Forwarded message -
From: YouTube mailto:nore...@youtube.com> >
Date: Thu, Jan 19, 2023 at 5:00 PM
Subject: 🔴 Couple of Bunkys just started a Premiere: Legacy Ornamental Mill 
Making a rope twist cane #walkingstick
To: Tim Ziegler mailto:timjzieg...@gmail.com> >

 

Live on YouTube: Couple of Bunkys - Legacy Ornamental Mill Making a rope twist 
cane #walkingstick! 




  


  _  






   


PREMIERE






 

 



 

 Legacy Ornamental Mill Making a rope twist cane #walkingstick 


 

 Couple of Bunkys 






  _  



You were sent this email because you chose to receive updates from  

 Couple of Bunkys. 




© 2023 YouTube, LLC 901 Cherry Ave, San Bruno, CA 94066 






  

  

   

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
 .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLGJh047ar3siPsPqw3RYi80bQJZi7dOGrpCWOewc68t2Q%40mail.gmail.com
 

 .




 

-- 

Timothy Lee Woodard

E: twoodard...@gmail.com  

C: (757) 399-9778

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com

Re: 🔴 Couple of Bunkys just started a Premiere: Legacy Ornamental Mill Making a rope twist cane #walkingstick

2023-01-20 Thread Tim Ziegler

Hey Bill we're not letting you off the hook that easy. You've way over 20
years experience on LOM's, we still need you.



On Fri, Jan 20, 2023, 7:36 AM  wrote:

> At last somebody that can make legacy videos better than me now I don’t
> have to make them
>
>
>
> Bill
>
>
>
>
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Rick Hutley
> *Sent:* Friday, 20 January 2023 8:47 PM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* Re: 🔴 Couple of Bunkys just started a Premiere: Legacy
> Ornamental Mill Making a rope twist cane #walkingstick
>
>
>
> Subscribed - great videos. I love the speed of the videos, with voice
> description overlays. I get very frustrated by the ‘usual’ videos one
> finds, where they repeat every step at normal speed - after seeing someone
> cut one board, I don’t then need to see them repeat it for the other 3
> sides of the box - well, not at normal speed. You do it in fast mode and
> describe at normal speed: all 4 sides demonstrated in the timeline of one
> side. Excellent 😊
>
>
>
> Rick
>
>
>
> On Jan 19, 2023, at 21:57, Tim Woodard  wrote:
>
> 
>
> Thanks for sharing. my wife and I are Couple of bunkys on youtube please
> consider subscribing we do a new project every Thursday. check us out
> https://www.youtube.com/@CoupleofBunkies
>
>
>
> On Thu, Jan 19, 2023 at 9:49 PM Tim Ziegler  wrote:
>
> Here you go guys eat it up.
>
> New LOM owner having fun.
>
>
> Kind Regards,
>
>
>
> Timothy J. Ziegler
>
> Ziegler WoodWork & Specialty
>
> 14171 160th Ave.
>
> Foreston MN 56330
>
>
>
> 320-294-5798 shop
>
> 320-630-2243 cell
>
>
>
> -- Forwarded message -
> From: *YouTube* 
> Date: Thu, Jan 19, 2023 at 5:00 PM
> Subject: 🔴 Couple of Bunkys just started a Premiere: Legacy Ornamental
> Mill Making a rope twist cane #walkingstick
> To: Tim Ziegler 
>
>
>
> Live on YouTube: Couple of Bunkys - Legacy Ornamental Mill Making a rope
> twist cane #walkingstick!
>
> [image: Youtube Logo]
> 
> --
>
> [image: Legacy Ornamental Mill Making a rope twist cane #walkingstick]
>
> PREMIERE
>
>
> 
>
> Legacy Ornamental Mill Making a rope twist cane #walkingstick
> 
>
> Couple of Bunkys
> 
> --
>
> You were sent this email because you chose to receive updates from Couple
> of Bunkys
> .
>
>
> © 2023 YouTube, LLC 901 Cherry Ave, San Bruno, CA 94066
>
> [image: YouTube]
> 
>
> [image: Twitter] 
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLGJh047ar3siPsPqw3RYi80bQJZi7dOGrpCWOewc68t2Q%40mail.gmail.com
> 
> .
>
>
>
>
> --
>
> Timothy Lee Woodard
>
> E: twoodard...@gmail.com
>
> C: (757) 399-9778
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/CAC6wDbWnGAnSPMCQziXPGXTtb1Y0uutfAAuYJNF%2BXJti8jaJvw%40mail.gmail.com
> 
> .
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/32163815-A31C-44B5

Re: 🔴 Couple of Bunkys just started a Premiere: Legacy Ornamental Mill Making a rope twist cane #walkingstick

2023-01-20 Thread Rick Hutley

Ah - but your videos are super-informative as well Bill!On Jan 20, 2023, at 08:36, bulke...@mmnet.com.au wrote:At last somebody that can make legacy videos better than me now I don’t have to make them  Bill   From: legacy-ornamental-mills@googlegroups.com  On Behalf Of Rick HutleySent: Friday, 20 January 2023 8:47 PMTo: legacy-ornamental-mills@googlegroups.comSubject: Re: 🔴 Couple of Bunkys just started a Premiere: Legacy Ornamental Mill Making a rope twist cane #walkingstick Subscribed - great videos. I love the speed of the videos, with voice description overlays. I get very frustrated by the ‘usual’ videos one finds, where they repeat every step at normal speed - after seeing someone cut one board, I don’t then need to see them repeat it for the other 3 sides of the box - well, not at normal speed. You do it in fast mode and describe at normal speed: all 4 sides demonstrated in the timeline of one side. Excellent 😊 RickOn Jan 19, 2023, at 21:57, Tim Woodard  wrote:Thanks for sharing. my wife and I are Couple of bunkys on youtube please consider subscribing we do a new project every Thursday. check us out https://www.youtube.com/@CoupleofBunkies On Thu, Jan 19, 2023 at 9:49 PM Tim Ziegler  wrote:Here you go guys eat it up. New LOM owner having fun.Kind Regards, Timothy J. ZieglerZiegler WoodWork & Specialty14171 160th Ave.Foreston MN 56330 320-294-5798 shop320-630-2243 cell -- Forwarded message -From: YouTube Date: Thu, Jan 19, 2023 at 5:00 PMSubject: 🔴 Couple of Bunkys just started a Premiere: Legacy Ornamental Mill Making a rope twist cane #walkingstickTo: Tim Ziegler  Live on YouTube: Couple of Bunkys - Legacy Ornamental Mill Making a rope twist cane #walkingstick! PREMIERELegacy Ornamental Mill Making a rope twist cane #walkingstick Couple of Bunkys You were sent this email because you chose to receive updates from Couple of Bunkys. © 2023 YouTube, LLC 901 Cherry Ave, San Bruno, CA 94066 -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group.To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com.To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLGJh047ar3siPsPqw3RYi80bQJZi7dOGrpCWOewc68t2Q%40mail.gmail.com. -- Timothy Lee WoodardE: twoodard...@gmail.comC: (757) 399-9778-- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group.To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com.To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/CAC6wDbWnGAnSPMCQziXPGXTtb1Y0uutfAAuYJNF%2BXJti8jaJvw%40mail.gmail.com.-- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group.To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com.To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/32163815-A31C-44B5-AA76-50A237C9D7CF%40gmail.com.



-- 
You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/000301d92cd4%2421f47ca0%2465dd75e0%24%40mmnet.com.au.




-- 
You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/19817916-7EA2-422B-867C-76D5C0073876%40gmail.com.

RE: 🔴 Couple of Bunkys just started a Premiere: Legacy Ornamental Mill Making a rope twist cane #walkingstick

2023-01-20 Thread bulkeley

At last somebody that can make legacy videos better than me now I don’t have to 
make them 

 

Bill

 

 

 

From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of Rick Hutley
Sent: Friday, 20 January 2023 8:47 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: 🔴 Couple of Bunkys just started a Premiere: Legacy Ornamental Mill 
Making a rope twist cane #walkingstick

 

Subscribed - great videos. I love the speed of the videos, with voice 
description overlays. I get very frustrated by the ‘usual’ videos one finds, 
where they repeat every step at normal speed - after seeing someone cut one 
board, I don’t then need to see them repeat it for the other 3 sides of the box 
- well, not at normal speed. You do it in fast mode and describe at normal 
speed: all 4 sides demonstrated in the timeline of one side. Excellent 😊

 

Rick





On Jan 19, 2023, at 21:57, Tim Woodard mailto:twoodard...@gmail.com> > wrote:



Thanks for sharing. my wife and I are Couple of bunkys on youtube please 
consider subscribing we do a new project every Thursday. check us out 
https://www.youtube.com/@CoupleofBunkies

 

On Thu, Jan 19, 2023 at 9:49 PM Tim Ziegler mailto:timjzieg...@gmail.com> > wrote:

Here you go guys eat it up. 

New LOM owner having fun.




Kind Regards,

 

Timothy J. Ziegler

Ziegler WoodWork & Specialty

14171 160th Ave.

Foreston MN 56330

 

320-294-5798 shop

320-630-2243 cell

 

-- Forwarded message -
From: YouTube mailto:nore...@youtube.com> >
Date: Thu, Jan 19, 2023 at 5:00 PM
Subject: 🔴 Couple of Bunkys just started a Premiere: Legacy Ornamental Mill 
Making a rope twist cane #walkingstick
To: Tim Ziegler mailto:timjzieg...@gmail.com> >

 

Live on YouTube: Couple of Bunkys - Legacy Ornamental Mill Making a rope twist 
cane #walkingstick! 




  


  _  






   


PREMIERE






 

 



 

 Legacy Ornamental Mill Making a rope twist cane #walkingstick 


 

 Couple of Bunkys 






  _  



You were sent this email because you chose to receive updates from  

 Couple of Bunkys. 




© 2023 YouTube, LLC 901 Cherry Ave, San Bruno, CA 94066 






  

  

   

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
 .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLGJh047ar3siPsPqw3RYi80bQJZi7dOGrpCWOewc68t2Q%40mail.gmail.com
 

 .




 

-- 

Timothy Lee Woodard

E: twoodard...@gmail.com  

C: (757) 399-9778

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
 .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAC6wDbWnGAnSPMCQziXPGXTtb1Y0uutfAAuYJNF%2BXJti8jaJvw%40mail.gmail.com
 

 .

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
 .
To view this discussion on the web visi

Re: 🔴 Couple of Bunkys just started a Premiere: Legacy Ornamental Mill Making a rope twist cane #walkingstick

2023-01-20 Thread Tim Ziegler

Well said Rick

Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Fri, Jan 20, 2023 at 3:46 AM Rick Hutley  wrote:

> Subscribed - great videos. I love the speed of the videos, with voice
> description overlays. I get very frustrated by the ‘usual’ videos one
> finds, where they repeat every step at normal speed - after seeing someone
> cut one board, I don’t then need to see them repeat it for the other 3
> sides of the box - well, not at normal speed. You do it in fast mode and
> describe at normal speed: all 4 sides demonstrated in the timeline of one
> side. Excellent 😊
>
> Rick
>
> On Jan 19, 2023, at 21:57, Tim Woodard  wrote:
>
> 
> Thanks for sharing. my wife and I are Couple of bunkys on youtube please
> consider subscribing we do a new project every Thursday. check us out
> https://www.youtube.com/@CoupleofBunkies
>
> On Thu, Jan 19, 2023 at 9:49 PM Tim Ziegler  wrote:
>
>> Here you go guys eat it up.
>> New LOM owner having fun.
>>
>> Kind Regards,
>>
>> Timothy J. Ziegler
>> Ziegler WoodWork & Specialty
>> 14171 160th Ave.
>> Foreston MN 56330
>>
>> 320-294-5798 shop
>> 320-630-2243 cell
>>
>>
>> -- Forwarded message -
>> From: YouTube 
>> Date: Thu, Jan 19, 2023 at 5:00 PM
>> Subject: 🔴 Couple of Bunkys just started a Premiere: Legacy Ornamental
>> Mill Making a rope twist cane #walkingstick
>> To: Tim Ziegler 
>>
>>
>> Live on YouTube: Couple of Bunkys - Legacy Ornamental Mill Making a rope
>> twist cane #walkingstick!
>> [image: Youtube Logo]
>> 
>> --
>> [image: Legacy Ornamental Mill Making a rope twist cane #walkingstick]
>>
>> PREMIERE
>>
>> 
>>
>> 
>> Legacy Ornamental Mill Making a rope twist cane #walkingstick
>> 
>> Couple of Bunkys
>> 
>> --
>> You were sent this email because you chose to receive updates from Couple
>> of Bunkys
>> .
>>
>> © 2023 YouTube, LLC 901 Cherry Ave, San Bruno, CA 94066
>> [image: YouTube]
>>  
>> [image:
>> Twitter] 
>>
>> --
>> You received this message because you are subscribed to the Google Groups
>> "Legacy Ornamental Mills" group.
>> To unsubscribe from this group and stop receiving emails from it, send an
>> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
>> To view this discussion on the web visit
>> https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLGJh047ar3siPsPqw3RYi80bQJZi7dOGrpCWOewc68t2Q%40mail.gmail.com
>> 
>> .
>>
>
>
> --
> Timothy Lee Woodard
> E: twoodard...@gmail.com
> C: (757) 399-9778
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/CAC6wDbWnGAnSPMCQziXPGXTtb1Y0uutfAAuYJNF%2BXJti8jaJvw%40mail.gmail.com
> 
> .
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/32163815-A31C-44B5-AA76-50A237C9D7CF%40gmail.com
> 
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from

Re: 🔴 Couple of Bunkys just started a Premiere: Legacy Ornamental Mill Making a rope twist cane #walkingstick

2023-01-20 Thread Tim Ziegler

yup it was enjoyable for sure.

Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Thu, Jan 19, 2023 at 11:02 PM 'Curt George' via Legacy Ornamental Mills <
legacy-ornamental-mills@googlegroups.com> wrote:

> Hello Everyone.
>
> Tim and Tim. I very much enjoyed watching the video.
>
> Thank you.
>
> C.A.G.
>
> On Thursday, January 19, 2023 at 11:03:10 PM EST, Tim Ziegler <
> timjzieg...@gmail.com> wrote:
>
>
> Thanks Tim W.,
>
> Super excited to see your progress on them.
> Thanks again for sharing.
>
> Kind Regards,
>
> Timothy J. Ziegler
> Ziegler WoodWork & Specialty
> 14171 160th Ave.
> Foreston MN 56330
>
> 320-294-5798 shop
> 320-630-2243 cell
>
>
> On Thu, Jan 19, 2023 at 9:39 PM Tim Woodard  wrote:
>
> We have been eyeing up one of these machines for a while. We joined after
> finding out about them. We started researching after falling in love with
> ribbon twist canes a friend in Ohio was making with a cnc lathe. We did not
> have that type of capital so we learned other ways to make them. We sold a
> lot of canes so we could invest in this machine. We are lookin forward to
> sharing our progress with on youtube. We are working on table legs now.
>
> On Thu, Jan 19, 2023, 10:02 PM Tim Ziegler  wrote:
>
> Hey Tim,
>
> I already subscribed when you had your post of it coming a couple weeks
> back. Was exciting to see it.
> Are you a member here with us already?
>
> Kind Regards,
>
> Timothy J. Ziegler
> Ziegler WoodWork & Specialty
> 14171 160th Ave.
> Foreston MN 56330
>
> 320-294-5798 shop
> 320-630-2243 cell
>
>
> On Thu, Jan 19, 2023 at 8:57 PM Tim Woodard  wrote:
>
> Thanks for sharing. my wife and I are Couple of bunkys on youtube please
> consider subscribing we do a new project every Thursday. check us out
> https://www.youtube.com/@CoupleofBunkies
>
> On Thu, Jan 19, 2023 at 9:49 PM Tim Ziegler  wrote:
>
> Here you go guys eat it up.
> New LOM owner having fun.
>
> Kind Regards,
>
> Timothy J. Ziegler
> Ziegler WoodWork & Specialty
> 14171 160th Ave.
> Foreston MN 56330
>
> 320-294-5798 shop
> 320-630-2243 cell
>
>
> -- Forwarded message -
> From: *YouTube* 
> Date: Thu, Jan 19, 2023 at 5:00 PM
> Subject: 🔴 Couple of Bunkys just started a Premiere: Legacy Ornamental
> Mill Making a rope twist cane #walkingstick
> To: Tim Ziegler 
>
>
> Live on YouTube: Couple of Bunkys - Legacy Ornamental Mill Making a rope
> twist cane #walkingstick!
> [image: Youtube Logo]
> 
> --
> [image: Legacy Ornamental Mill Making a rope twist cane #walkingstick]
>
> PREMIERE
>
> 
>
> 
> Legacy Ornamental Mill Making a rope twist cane #walkingstick
> 
> Couple of Bunkys
> 
> --
> You were sent this email because you chose to receive updates from Couple
> of Bunkys
> .
>
> © 2023 YouTube, LLC 901 Cherry Ave, San Bruno, CA 94066
> [image: YouTube]
>  
> [image:
> Twitter] 
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLGJh047ar3siPsPqw3RYi80bQJZi7dOGrpCWOewc68t2Q%40mail.gmail.com
> 
> .
>
>
>
> --
> Timothy Lee Woodard
> E: twoodard...@gmail.com
> C: (757) 399-9778
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/CAC6wDbWnGAnSPMCQziXPGXTtb1Y0uutfAAuYJ

Re: 🔴 Couple of Bunkys just started a Premiere: Legacy Ornamental Mill Making a rope twist cane #walkingstick

2023-01-20 Thread Rick Hutley

Subscribed - great videos. I love the speed of the videos, with voice description overlays. I get very frustrated by the ‘usual’ videos one finds, where they repeat every step at normal speed - after seeing someone cut one board, I don’t then need to see them repeat it for the other 3 sides of the box - well, not at normal speed. You do it in fast mode and describe at normal speed: all 4 sides demonstrated in the timeline of one side. Excellent 😊RickOn Jan 19, 2023, at 21:57, Tim Woodard wrote:Thanks for sharing. my wife and I are Couple of bunkys on youtube please consider subscribing we do a new project every Thursday. check us out https://www.youtube.com/@CoupleofBunkiesOn Thu, Jan 19, 2023 at 9:49 PM Tim Ziegler wrote:Here you go guys eat it up. New LOM owner having fun.Kind Regards,Timothy J. ZieglerZiegler WoodWork & Specialty14171 160th Ave.Foreston MN 56330320-294-5798 shop320-630-2243 cell-- Forwarded message -From: YouTube Date: Thu, Jan 19, 2023 at 5:00 PMSubject: 🔴 Couple of Bunkys just started a Premiere: Legacy Ornamental Mill Making a rope twist cane #walkingstickTo: Tim Ziegler

Live on YouTube: Couple of Bunkys - Legacy Ornamental Mill Making a rope twist cane #walkingstick!

PREMIERE

Legacy Ornamental Mill Making a rope twist cane #walkingstick

Couple of Bunkys

You were sent this email because you chose to receive updates from Couple of Bunkys.

--
You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLGJh047ar3siPsPqw3RYi80bQJZi7dOGrpCWOewc68t2Q%40mail.gmail.com.
-- Timothy Lee WoodardE: twoodard...@gmail.comC: (757) 399-9778

--
You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/CAC6wDbWnGAnSPMCQziXPGXTtb1Y0uutfAAuYJNF%2BXJti8jaJvw%40mail.gmail.com.

Re: 🔴 Couple of Bunkys just started a Premiere: Legacy Ornamental Mill Making a rope twist cane #walkingstick

RE: STOP THE PRESS, NEW SPLIT NUT

RE: STOP THE PRESS, NEW SPLIT NUT

RE: STOP THE PRESS, NEW SPLIT NUT

Re: STOP THE PRESS, NEW SPLIT NUT

Re: STOP THE PRESS, NEW SPLIT NUT

Re: STOP THE PRESS, NEW SPLIT NUT

RE: STOP THE PRESS, NEW SPLIT NUT

Re: STOP THE PRESS, NEW SPLIT NUT

Re: STOP THE PRESS, NEW SPLIT NUT

RE: STOP THE PRESS, NEW SPLIT NUT

RE: STOP THE PRESS, NEW SPLIT NUT

Re: STOP THE PRESS, NEW SPLIT NUT

Re: 🔴 Couple of Bunkys just started a Premiere: Legacy Ornamental Mill Making a rope twist cane #walkingstick

Re: 🔴 Couple of Bunkys just started a Premiere: Legacy Ornamental Mill Making a rope twist cane #walkingstick

Re: STOP THE PRESS, NEW SPLIT NUT

RE: 🔴 Couple of Bunkys just started a Premiere: Legacy Ornamental Mill Making a rope twist cane #walkingstick

Re: 🔴 Couple of Bunkys just started a Premiere: Legacy Ornamental Mill Making a rope twist cane #walkingstick

RE: 🔴 Couple of Bunkys just started a Premiere: Legacy Ornamental Mill Making a rope twist cane #walkingstick

Re: 🔴 Couple of Bunkys just started a Premiere: Legacy Ornamental Mill Making a rope twist cane #walkingstick

Re: 🔴 Couple of Bunkys just started a Premiere: Legacy Ornamental Mill Making a rope twist cane #walkingstick

RE: 🔴 Couple of Bunkys just started a Premiere: Legacy Ornamental Mill Making a rope twist cane #walkingstick

Re: 🔴 Couple of Bunkys just started a Premiere: Legacy Ornamental Mill Making a rope twist cane #walkingstick

Re: 🔴 Couple of Bunkys just started a Premiere: Legacy Ornamental Mill Making a rope twist cane #walkingstick

Re: 🔴 Couple of Bunkys just started a Premiere: Legacy Ornamental Mill Making a rope twist cane #walkingstick

25 matches

Site Navigation

Mail list logo

Footer information