Re: Metal Drive Gears

[M.W.Foscue]

-Original Message-
From: 
Sent: Feb 8, 2023 7:07 AM
To: LOM Group 
Subject: Metal Drive Gears

Just emailed Cindy yesterday, and asked if we can still get metal drive gears. 
Yes we can still get them. Takes about a month of turn around to get them made. 
$140.00 per set. So anyone interested they are available. 
My suggestion is get them ordered if you want metal gears. 
Kind Regards,Timothy J. Ziegler






-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/69c2d0bd-0ce9-5ae8-a380-d4045f7da07b%40earthlink.net.

Re: Eric 900

[Tom B.C. Canada]

thanks Bill

On Wednesday, February 8, 2023 at 8:18:43 PM UTC-8 bulk...@mmnet.com.au 
wrote:

> That is exactly what it’s for it’s a handle because the 900 has no height 
> adjusting acme screws like the larger models do
>
>  
>
> Bill
>
>  
>
> *From:* legacy-orna...@googlegroups.com  *On 
> Behalf Of *Eric Gantner
> *Sent:* Thursday, 9 February 2023 2:43 PM
> *To:* legacy-orna...@googlegroups.com
> *Subject:* Re: Eric 900
>
>  
>
> Tom,
>
>  
>
> It is part of the bed, one of the SME’s can better answer what it is for.  
> I would guess it it so you can grab it when you have to adjust the height.  
> I am not sure about the Z-axis, that part came put together MTF.  Thanks
>
>  
>
> Eric G. 
>
>  
>
> On Wed, Feb 8, 2023 at 10:10 PM Tom B.C. Canada  
> wrote:
>
> At the tail end of the bed is a red crossmember with a long oval cut out 
> on the beveled part.
>
> what is that for ?  and does that red crossmember connect to the frame or 
> the bed?
>
> what's the bevel for?
>
> Looks like a great machine Eric, especially with the adjustable z axis so 
> you can see what
>
> the bit is doing.  
>
> Does the z axis have delrin that travels up and down in the alum 
> rails..kinda like the Y  ?
>
> Thanks for posting all the pics. 
>
> On Wednesday, February 8, 2023 at 6:45:24 PM UTC-8 bulk...@mmnet.com.au 
> wrote:
>
> Your rails might also be very slightly out of line too with the saddle at 
> the tight end loosen and retighten the screws holding the rails and also 
> the screws holding the saddle top hat this may help it doesn’t take much to 
> stiffen it up slightly some one may tell you to file the Delrin top hat 
> slightly that is a last resort after trying everything else first
>
> Because elsewhere with then will be too loose 
>
>  
>
> Bill
>
>  
>
> *From:* legacy-orna...@googlegroups.com  *On 
> Behalf Of *Eric Gantner
> *Sent:* Thursday, 9 February 2023 1:33 PM
> *To:* legacy-orna...@googlegroups.com
> *Subject:* Re: Eric 900
>
>  
>
> Bill,
>
>  
>
> I need to recheck everything then, mine is not that smooth especially 
> towards the tailstock end.  I will check out the video, thank you for the 
> info.  
>
>  
>
> Eric
>
> Sent from my iPad
>
>  
>
> On Feb 8, 2023, at 8:24 PM, bulk...@mmnet.com.au wrote:
>
> 
>
> The first thing to check is when the both half nuts are disengaged and 
> dyna-glide lubricated both saddles slide easily all the way in both 
> directions
>
> they should not be tight one finger easy That takes all the strain off the 
> half nuts and top hat slides and even the gears
>
> that is the best way to determine that your mill is most likely  assembled 
> correct and working properly . always check this before starting any job 
> this will greatly increase the life of all things made of Delrin on your 
> mill.
>
> After a mount of time your mills slides will get tight even with cleaning 
> dust builds up between the top hats where you can’t see and periodically 
> will need clearing you can see me doing it on my revo mill here 
> https://www.youtube.com/watch?v=3m0FrK1EGFg_channel=aussiman77181 in 
> the middle of milling the wooden screw.
>
> it’s the same on regular mills the top hat rails are just on the side 
> instead of on top they are cleaned the same way.
>
> So when you think your rails are clean and after it moves easy a small 
> distance gets tight this is the problem.
>
>  
>
> Bill
>
>  
>
>  
>
> *From:* legacy-orna...@googlegroups.com  *On 
> Behalf Of *Eric Gantner
> *Sent:* Thursday, 9 February 2023 10:40 AM
> *To:* legacy-orna...@googlegroups.com
> *Subject:* Re: Eric 900
>
>  
>
> Bill, 
>
>  
>
> Thanks, I will also take pictures of the whole mill.
>
>  
>
> Eric Gantner
>
>  
>
> On Wed, Feb 8, 2023 at 6:34 PM  wrote:
>
> From what I can see which is not all of the mill everything looks ok, 
> before amazon ask the group someone might have a spare
> Spindle crank handle they could sell you
>
> Bill
>
> -Original Message-
> From: legacy-orna...@googlegroups.com  
> On Behalf Of Eric Gantner
> Sent: Thursday, 9 February 2023 9:38 AM
> To: legacy-orna...@googlegroups.com
> Subject: Eric 900
>
> Good Evening Gents,
>
> I turned on 900 for the time today, big learning curve.  Come to find out 
> I am missing a spindle shaft handle.  Pretty sure I  can order a handle 
> from Amazon and make the hole bigger.  Please check out my pictures and 
> please let me know if some is setup  incorrectly.  Thanks Eric Gantner
>
> -- 
> You received this message because you are subscribed to the Google Groups 
> "Legacy Ornamental Mills" group.
>
> To unsubscribe from this group and stop receiving emails from it, send an 
> email to legacy-ornamental...@googlegroups.com.
> To view this discussion on the web visit 
> https://groups.google.com/d/msgid/legacy-ornamental-mills/162E8720-81BE-467A-8E82-E46DA69579CC%40gmail.com
> .
>
> -- 
> You received this message because you are subscribed to the Google Groups 
> "Legacy Ornamental Mills" group.
> To unsubscribe from 

RE: Eric 900

[bulkeley]

That is exactly what it’s for it’s a handle because the 900 has no height 
adjusting acme screws like the larger models do

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of Eric Gantner
Sent: Thursday, 9 February 2023 2:43 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Eric 900

 

Tom,

 

It is part of the bed, one of the SME’s can better answer what it is for.  I 
would guess it it so you can grab it when you have to adjust the height.  I am 
not sure about the Z-axis, that part came put together MTF.  Thanks

 

Eric G. 

 

On Wed, Feb 8, 2023 at 10:10 PM Tom B.C. Canada mailto:gold...@hotmail.com> > wrote:

At the tail end of the bed is a red crossmember with a long oval cut out on the 
beveled part.

what is that for ?  and does that red crossmember connect to the frame or the 
bed?

what's the bevel for?

Looks like a great machine Eric, especially with the adjustable z axis so you 
can see what

the bit is doing.  

Does the z axis have delrin that travels up and down in the alum rails..kinda 
like the Y  ?

Thanks for posting all the pics. 

On Wednesday, February 8, 2023 at 6:45:24 PM UTC-8 bulk...@mmnet.com.au 
  wrote:

Your rails might also be very slightly out of line too with the saddle at the 
tight end loosen and retighten the screws holding the rails and also the screws 
holding the saddle top hat this may help it doesn’t take much to stiffen it up 
slightly some one may tell you to file the Delrin top hat slightly that is a 
last resort after trying everything else first

Because elsewhere with then will be too loose 

 

Bill

 

From: legacy-orna...@googlegroups.com mailto:legacy-orna...@googlegroups.com> > On Behalf Of Eric Gantner
Sent: Thursday, 9 February 2023 1:33 PM
To: legacy-orna...@googlegroups.com  
Subject: Re: Eric 900

 

Bill,

 

I need to recheck everything then, mine is not that smooth especially towards 
the tailstock end.  I will check out the video, thank you for the info.  

 

Eric

Sent from my iPad

 

On Feb 8, 2023, at 8:24 PM, bulk...@mmnet.com.au   
wrote:



The first thing to check is when the both half nuts are disengaged and 
dyna-glide lubricated both saddles slide easily all the way in both directions

they should not be tight one finger easy That takes all the strain off the half 
nuts and top hat slides and even the gears

that is the best way to determine that your mill is most likely  assembled 
correct and working properly . always check this before starting any job this 
will greatly increase the life of all things made of Delrin on your mill.

After a mount of time your mills slides will get tight even with cleaning dust 
builds up between the top hats where you can’t see and periodically will need 
clearing you can see me doing it on my revo mill here 
https://www.youtube.com/watch?v=3m0FrK1EGFg 
 
_channel=aussiman77181 in the middle of milling the wooden screw.

it’s the same on regular mills the top hat rails are just on the side instead 
of on top they are cleaned the same way.

So when you think your rails are clean and after it moves easy a small distance 
gets tight this is the problem.

 

Bill

 

 

From: legacy-orna...@googlegroups.com   
mailto:legacy-orna...@googlegroups.com> > On 
Behalf Of Eric Gantner
Sent: Thursday, 9 February 2023 10:40 AM
To: legacy-orna...@googlegroups.com  
Subject: Re: Eric 900

 

Bill, 

 

Thanks, I will also take pictures of the whole mill.

 

Eric Gantner

 

On Wed, Feb 8, 2023 at 6:34 PM mailto:bulk...@mmnet.com.au> > wrote:

>From what I can see which is not all of the mill everything looks ok, before 
>amazon ask the group someone might have a spare
Spindle crank handle they could sell you

Bill

-Original Message-
From: legacy-orna...@googlegroups.com   
mailto:legacy-orna...@googlegroups.com> > On 
Behalf Of Eric Gantner
Sent: Thursday, 9 February 2023 9:38 AM
To: legacy-orna...@googlegroups.com  
Subject: Eric 900

Good Evening Gents,

I turned on 900 for the time today, big learning curve.  Come to find out I am 
missing a spindle shaft handle.  Pretty sure I  can order a handle from Amazon 
and make the hole bigger.  Please check out my pictures and please let me know 
if some is setup  incorrectly.  Thanks Eric Gantner

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.

To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental...@googlegroups.com 
 .
To view this discussion on the web visit 

Re: Eric 900

[Eric Gantner]

Tom,

It is part of the bed, one of the SME’s can better answer what it is for.
I would guess it it so you can grab it when you have to adjust the height.
I am not sure about the Z-axis, that part came put together MTF.  Thanks

Eric G.

On Wed, Feb 8, 2023 at 10:10 PM Tom B.C. Canada  wrote:

> At the tail end of the bed is a red crossmember with a long oval cut out
> on the beveled part.
> what is that for ?  and does that red crossmember connect to the frame or
> the bed?
> what's the bevel for?
> Looks like a great machine Eric, especially with the adjustable z axis so
> you can see what
> the bit is doing.
> Does the z axis have delrin that travels up and down in the alum
> rails..kinda like the Y  ?
> Thanks for posting all the pics.
>
> On Wednesday, February 8, 2023 at 6:45:24 PM UTC-8 bulk...@mmnet.com.au
> wrote:
>
>> Your rails might also be very slightly out of line too with the saddle at
>> the tight end loosen and retighten the screws holding the rails and also
>> the screws holding the saddle top hat this may help it doesn’t take much to
>> stiffen it up slightly some one may tell you to file the Delrin top hat
>> slightly that is a last resort after trying everything else first
>>
>> Because elsewhere with then will be too loose
>>
>
>>
>> Bill
>>
>>
>>
>> *From:* legacy-orna...@googlegroups.com 
>> *On Behalf Of *Eric Gantner
>> *Sent:* Thursday, 9 February 2023 1:33 PM
>> *To:* legacy-orna...@googlegroups.com
>> *Subject:* Re: Eric 900
>>
>>
>>
>> Bill,
>>
>>
>>
>> I need to recheck everything then, mine is not that smooth especially
>> towards the tailstock end.  I will check out the video, thank you for the
>> info.
>>
>>
>>
> Eric
>>
>> Sent from my iPad
>>
>>
>>
>> On Feb 8, 2023, at 8:24 PM, bulk...@mmnet.com.au wrote:
>>
>> 
>>
>> The first thing to check is when the both half nuts are disengaged and
>> dyna-glide lubricated both saddles slide easily all the way in both
>> directions
>>
>> they should not be tight one finger easy That takes all the strain off
>> the half nuts and top hat slides and even the gears
>>
>> that is the best way to determine that your mill is most likely
>>  assembled correct and working properly . always check this before starting
>> any job this will greatly increase the life of all things made of Delrin on
>> your mill.
>>
>> After a mount of time your mills slides will get tight even with cleaning
>> dust builds up between the top hats where you can’t see and periodically
>> will need clearing you can see me doing it on my revo mill here
>> https://www.youtube.com/watch?v=3m0FrK1EGFg_channel=aussiman77181 in
>> the middle of milling the wooden screw.
>>
>> it’s the same on regular mills the top hat rails are just on the side
>> instead of on top they are cleaned the same way.
>>
>> So when you think your rails are clean and after it moves easy a small
>> distance gets tight this is the problem.
>>
>>
>>
>> Bill
>>
>>
>>
>>
>>
>> *From:* legacy-orna...@googlegroups.com 
>> *On Behalf Of *Eric Gantner
>> *Sent:* Thursday, 9 February 2023 10:40 AM
>> *To:* legacy-orna...@googlegroups.com
>> *Subject:* Re: Eric 900
>>
>>
>>
>> Bill,
>>
>>
>>
>> Thanks, I will also take pictures of the whole mill.
>>
>>
>>
>> Eric Gantner
>>
>>
>>
>> On Wed, Feb 8, 2023 at 6:34 PM  wrote:
>>
>> From what I can see which is not all of the mill everything looks ok,
>> before amazon ask the group someone might have a spare
>> Spindle crank handle they could sell you
>>
>> Bill
>>
>> -Original Message-
>> From: legacy-orna...@googlegroups.com 
>> On Behalf Of Eric Gantner
>> Sent: Thursday, 9 February 2023 9:38 AM
>> To: legacy-orna...@googlegroups.com
>> Subject: Eric 900
>>
>> Good Evening Gents,
>>
>> I turned on 900 for the time today, big learning curve.  Come to find out
>> I am missing a spindle shaft handle.  Pretty sure I  can order a handle
>> from Amazon and make the hole bigger.  Please check out my pictures and
>> please let me know if some is setup  incorrectly.  Thanks Eric Gantner
>>
>> --
>> You received this message because you are subscribed to the Google Groups
>> "Legacy Ornamental Mills" group.
>>
>> To unsubscribe from this group and stop receiving emails from it, send an
>> email to legacy-ornamental...@googlegroups.com.
>> To view this discussion on the web visit
>> https://groups.google.com/d/msgid/legacy-ornamental-mills/162E8720-81BE-467A-8E82-E46DA69579CC%40gmail.com
>> .
>>
>> --
>> You received this message because you are subscribed to the Google Groups
>> "Legacy Ornamental Mills" group.
>> To unsubscribe from this group and stop receiving emails from it, send an
>> email to legacy-ornamental...@googlegroups.com.
>> To view this discussion on the web visit
>> https://groups.google.com/d/msgid/legacy-ornamental-mills/001e01d93c15%24dec4cec0%249c4e6c40%24%40mmnet.com.au
>> .
>>
>> --
>> You received this message because you are subscribed to the Google Groups
>> "Legacy Ornamental Mills" group.
>> To unsubscribe from this group and stop 

Re: Eric 900

[Tim Ziegler]

I am with you on that no filing you;'ll be sorry.

Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Wed, Feb 8, 2023 at 8:45 PM  wrote:

> Your rails might also be very slightly out of line too with the saddle at
> the tight end loosen and retighten the screws holding the rails and also
> the screws holding the saddle top hat this may help it doesn’t take much to
> stiffen it up slightly some one may tell you to file the Delrin top hat
> slightly that is a last resort after trying everything else first
>
> Because elsewhere with then will be too loose
>
>
>
> Bill
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Eric Gantner
> *Sent:* Thursday, 9 February 2023 1:33 PM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* Re: Eric 900
>
>
>
> Bill,
>
>
>
> I need to recheck everything then, mine is not that smooth especially
> towards the tailstock end.  I will check out the video, thank you for the
> info.
>
>
>
> Eric
>
> Sent from my iPad
>
>
>
> On Feb 8, 2023, at 8:24 PM, bulke...@mmnet.com.au wrote:
>
> 
>
> The first thing to check is when the both half nuts are disengaged and
> dyna-glide lubricated both saddles slide easily all the way in both
> directions
>
> they should not be tight one finger easy That takes all the strain off the
> half nuts and top hat slides and even the gears
>
> that is the best way to determine that your mill is most likely  assembled
> correct and working properly . always check this before starting any job
> this will greatly increase the life of all things made of Delrin on your
> mill.
>
> After a mount of time your mills slides will get tight even with cleaning
> dust builds up between the top hats where you can’t see and periodically
> will need clearing you can see me doing it on my revo mill here
> https://www.youtube.com/watch?v=3m0FrK1EGFg_channel=aussiman77181 in
> the middle of milling the wooden screw.
>
> it’s the same on regular mills the top hat rails are just on the side
> instead of on top they are cleaned the same way.
>
> So when you think your rails are clean and after it moves easy a small
> distance gets tight this is the problem.
>
>
>
> Bill
>
>
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Eric Gantner
> *Sent:* Thursday, 9 February 2023 10:40 AM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* Re: Eric 900
>
>
>
> Bill,
>
>
>
> Thanks, I will also take pictures of the whole mill.
>
>
>
> Eric Gantner
>
>
>
> On Wed, Feb 8, 2023 at 6:34 PM  wrote:
>
> From what I can see which is not all of the mill everything looks ok,
> before amazon ask the group someone might have a spare
> Spindle crank handle they could sell you
>
> Bill
>
> -Original Message-
> From: legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> On Behalf Of Eric Gantner
> Sent: Thursday, 9 February 2023 9:38 AM
> To: legacy-ornamental-mills@googlegroups.com
> Subject: Eric 900
>
> Good Evening Gents,
>
> I turned on 900 for the time today, big learning curve.  Come to find out
> I am missing a spindle shaft handle.  Pretty sure I  can order a handle
> from Amazon and make the hole bigger.  Please check out my pictures and
> please let me know if some is setup  incorrectly.  Thanks Eric Gantner
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/162E8720-81BE-467A-8E82-E46DA69579CC%40gmail.com
> .
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/001e01d93c15%24dec4cec0%249c4e6c40%24%40mmnet.com.au
> .
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/CAFcbDswYSqpQFku_33YZnDLmuKvGq5XvfB61vqF7%3DyQcpzz59Q%40mail.gmail.com
> 
> .
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy 

RE: French rolling pins

[bulkeley]

Interesting thank you 

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of Mike Newman
Sent: Thursday, 9 February 2023 1:59 PM
To: Legacy Ornamental Mills 
Subject: Re: French rolling pins

 

Usually I start with 2x2 stock and turn down but these started out smaller.  
bigger one is about 1-3/4 dia and the smaller one is about 1-1/4.  The smaller 
one had a void that I had to mill down thru so it got smaller.  My daughter 
came by tonight to grab something else and when she saw the smaller one she 
immediately latched onto it for herself.  I can always make more.  I agree when 
I made them on the lathe it was always a struggle to be consistent across the 
entire length, but that is easy with the LOM.  I do love working with Walnut 
and when you put mineral oil on it boy does it pop.

On Wednesday, February 8, 2023 at 7:34:03 AM UTC-6 Michael Kratky wrote:

FYI; French rolling pins are tapered having researched and made scores of them 
for resale.

 

Michael Kratky

119 Riverview Rd., 

Northville, N.Y. 12134

 

518 863-2821  

text 518 207-7247  

 

Email;

kra...@roadrunner.com  

 

 





On Feb 8, 2023, at 1:22 AM, bulk...@mmnet.com.au   
wrote:

 

Looks great what dia are they

 

Bill

 

From: legacy-orna...@googlegroups.com   
mailto:legacy-orna...@googlegroups.com> > On 
Behalf Of Mike Newman
Sent: Wednesday, 8 February 2023 2:52 PM
To: Legacy Ornamental Mills mailto:legacy-orna...@googlegroups.com> >
Subject: French rolling pins

 

Tried out my recently acquired std hub and 4 prong bracket on my 1200 tonight.  
They worked great and I love the concept.  I made a couple of simple french 
rolling pins out of walnut and butternut.  I used to make these when I had my 
sawmill and live edge woodworking business and they sold pretty well.  



-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental...@googlegroups.com 
 .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/59e8804d-b110-44dc-8fd8-4640ba1428e3n%40googlegroups.com
 

 .

 

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental...@googlegroups.com 
 .

To view this discussion on the web visit  

 
https://groups.google.com/d/msgid/legacy-ornamental-mills/001001d93b85%24b669b390%24233d1ab0%24%40mmnet.com.au.

 

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
 .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/e6c96e12-5fc1-4ce7-ae14-fa9d61ba2c4cn%40googlegroups.com
 

 .

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/001801d93c35%243b5faf00%24b21f0d00%24%40mmnet.com.au.

Re: Eric 900

[Tom B.C. Canada]

At the tail end of the bed is a red crossmember with a long oval cut out on 
the beveled part.
what is that for ?  and does that red crossmember connect to the frame or 
the bed?
what's the bevel for?
Looks like a great machine Eric, especially with the adjustable z axis so 
you can see what
the bit is doing.  
Does the z axis have delrin that travels up and down in the alum 
rails..kinda like the Y  ?
Thanks for posting all the pics. 

On Wednesday, February 8, 2023 at 6:45:24 PM UTC-8 bulk...@mmnet.com.au 
wrote:

> Your rails might also be very slightly out of line too with the saddle at 
> the tight end loosen and retighten the screws holding the rails and also 
> the screws holding the saddle top hat this may help it doesn’t take much to 
> stiffen it up slightly some one may tell you to file the Delrin top hat 
> slightly that is a last resort after trying everything else first
>
> Because elsewhere with then will be too loose 
>
>  
>
> Bill
>
>  
>
> *From:* legacy-orna...@googlegroups.com  *On 
> Behalf Of *Eric Gantner
> *Sent:* Thursday, 9 February 2023 1:33 PM
> *To:* legacy-orna...@googlegroups.com
> *Subject:* Re: Eric 900
>
>  
>
> Bill,
>
>  
>
> I need to recheck everything then, mine is not that smooth especially 
> towards the tailstock end.  I will check out the video, thank you for the 
> info.  
>
>  
>
> Eric
>
> Sent from my iPad
>
>
>
> On Feb 8, 2023, at 8:24 PM, bulk...@mmnet.com.au wrote:
>
> 
>
> The first thing to check is when the both half nuts are disengaged and 
> dyna-glide lubricated both saddles slide easily all the way in both 
> directions
>
> they should not be tight one finger easy That takes all the strain off the 
> half nuts and top hat slides and even the gears
>
> that is the best way to determine that your mill is most likely  assembled 
> correct and working properly . always check this before starting any job 
> this will greatly increase the life of all things made of Delrin on your 
> mill.
>
> After a mount of time your mills slides will get tight even with cleaning 
> dust builds up between the top hats where you can’t see and periodically 
> will need clearing you can see me doing it on my revo mill here 
> https://www.youtube.com/watch?v=3m0FrK1EGFg_channel=aussiman77181 in 
> the middle of milling the wooden screw.
>
> it’s the same on regular mills the top hat rails are just on the side 
> instead of on top they are cleaned the same way.
>
> So when you think your rails are clean and after it moves easy a small 
> distance gets tight this is the problem.
>
>  
>
> Bill
>
>  
>
>  
>
> *From:* legacy-orna...@googlegroups.com  *On 
> Behalf Of *Eric Gantner
> *Sent:* Thursday, 9 February 2023 10:40 AM
> *To:* legacy-orna...@googlegroups.com
> *Subject:* Re: Eric 900
>
>  
>
> Bill, 
>
>  
>
> Thanks, I will also take pictures of the whole mill.
>
>  
>
> Eric Gantner
>
>  
>
> On Wed, Feb 8, 2023 at 6:34 PM  wrote:
>
> From what I can see which is not all of the mill everything looks ok, 
> before amazon ask the group someone might have a spare
> Spindle crank handle they could sell you
>
> Bill
>
> -Original Message-
> From: legacy-orna...@googlegroups.com  
> On Behalf Of Eric Gantner
> Sent: Thursday, 9 February 2023 9:38 AM
> To: legacy-orna...@googlegroups.com
> Subject: Eric 900
>
> Good Evening Gents,
>
> I turned on 900 for the time today, big learning curve.  Come to find out 
> I am missing a spindle shaft handle.  Pretty sure I  can order a handle 
> from Amazon and make the hole bigger.  Please check out my pictures and 
> please let me know if some is setup  incorrectly.  Thanks Eric Gantner
>
> -- 
> You received this message because you are subscribed to the Google Groups 
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an 
> email to legacy-ornamental...@googlegroups.com.
> To view this discussion on the web visit 
> https://groups.google.com/d/msgid/legacy-ornamental-mills/162E8720-81BE-467A-8E82-E46DA69579CC%40gmail.com
> .
>
> -- 
> You received this message because you are subscribed to the Google Groups 
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an 
> email to legacy-ornamental...@googlegroups.com.
> To view this discussion on the web visit 
> https://groups.google.com/d/msgid/legacy-ornamental-mills/001e01d93c15%24dec4cec0%249c4e6c40%24%40mmnet.com.au
> .
>
> -- 
> You received this message because you are subscribed to the Google Groups 
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an 
> email to legacy-ornamental...@googlegroups.com.
> To view this discussion on the web visit 
> https://groups.google.com/d/msgid/legacy-ornamental-mills/CAFcbDswYSqpQFku_33YZnDLmuKvGq5XvfB61vqF7%3DyQcpzz59Q%40mail.gmail.com
>  
> 

Re: French rolling pins

[Mike Newman]

Usually I start with 2x2 stock and turn down but these started out 
smaller.  bigger one is about 1-3/4 dia and the smaller one is about 
1-1/4.  The smaller one had a void that I had to mill down thru so it got 
smaller.  My daughter came by tonight to grab something else and when she 
saw the smaller one she immediately latched onto it for herself.  I can 
always make more.  I agree when I made them on the lathe it was always a 
struggle to be consistent across the entire length, but that is easy with 
the LOM.  I do love working with Walnut and when you put mineral oil on it 
boy does it pop.

On Wednesday, February 8, 2023 at 7:34:03 AM UTC-6 Michael Kratky wrote:

> FYI; French rolling pins are tapered having researched and made scores of 
> them for resale.
>
> Michael Kratky
> 119 Riverview Rd., 
> Northville, N.Y. 12134
>
> 518 863-2821 <(518)%20863-2821>
> text 518 207-7247 <(518)%20207-7247>
>
> Email;
> kra...@roadrunner.com
>
>
>
> On Feb 8, 2023, at 1:22 AM, bulk...@mmnet.com.au wrote:
>
> Looks great what dia are they
>  
> Bill
>  
> *From:* legacy-orna...@googlegroups.com  *On 
> Behalf Of *Mike Newman
> *Sent:* Wednesday, 8 February 2023 2:52 PM
> *To:* Legacy Ornamental Mills 
> *Subject:* French rolling pins
>  
> Tried out my recently acquired std hub and 4 prong bracket on my 1200 
> tonight.  They worked great and I love the concept.  I made a couple of 
> simple french rolling pins out of walnut and butternut.  I used to make 
> these when I had my sawmill and live edge woodworking business and they 
> sold pretty well.  
>
> 
>
> -- 
> You received this message because you are subscribed to the Google Groups 
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an 
> email to legacy-ornamental...@googlegroups.com.
> To view this discussion on the web visit 
> https://groups.google.com/d/msgid/legacy-ornamental-mills/59e8804d-b110-44dc-8fd8-4640ba1428e3n%40googlegroups.com
>  
> 
> .
>
>
> -- 
> You received this message because you are subscribed to the Google Groups 
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an 
> email to legacy-ornamental...@googlegroups.com.
>
> To view this discussion on the web visit 
> https://groups.google.com/d/msgid/legacy-ornamental-mills/001001d93b85%24b669b390%24233d1ab0%24%40mmnet.com.au
>  
> 
> .
>
>
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/e6c96e12-5fc1-4ce7-ae14-fa9d61ba2c4cn%40googlegroups.com.

RE: Eric 900

[bulkeley]

Your rails might also be very slightly out of line too with the saddle at the 
tight end loosen and retighten the screws holding the rails and also the screws 
holding the saddle top hat this may help it doesn’t take much to stiffen it up 
slightly some one may tell you to file the Delrin top hat slightly that is a 
last resort after trying everything else first

Because elsewhere with then will be too loose 

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of Eric Gantner
Sent: Thursday, 9 February 2023 1:33 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Eric 900

 

Bill,

 

I need to recheck everything then, mine is not that smooth especially towards 
the tailstock end.  I will check out the video, thank you for the info.  

 

Eric

Sent from my iPad





On Feb 8, 2023, at 8:24 PM, bulke...@mmnet.com.au 
  wrote:



The first thing to check is when the both half nuts are disengaged and 
dyna-glide lubricated both saddles slide easily all the way in both directions

they should not be tight one finger easy That takes all the strain off the half 
nuts and top hat slides and even the gears

that is the best way to determine that your mill is most likely  assembled 
correct and working properly . always check this before starting any job this 
will greatly increase the life of all things made of Delrin on your mill.

After a mount of time your mills slides will get tight even with cleaning dust 
builds up between the top hats where you can’t see and periodically will need 
clearing you can see me doing it on my revo mill here 
https://www.youtube.com/watch?v=3m0FrK1EGFg 
 
_channel=aussiman77181 in the middle of milling the wooden screw.

it’s the same on regular mills the top hat rails are just on the side instead 
of on top they are cleaned the same way.

So when you think your rails are clean and after it moves easy a small distance 
gets tight this is the problem.

 

Bill

 

 

From: legacy-ornamental-mills@googlegroups.com 
  
mailto:legacy-ornamental-mills@googlegroups.com> > On Behalf Of Eric Gantner
Sent: Thursday, 9 February 2023 10:40 AM
To: legacy-ornamental-mills@googlegroups.com 
 
Subject: Re: Eric 900

 

Bill, 

 

Thanks, I will also take pictures of the whole mill.

 

Eric Gantner

 

On Wed, Feb 8, 2023 at 6:34 PM mailto:bulke...@mmnet.com.au> > wrote:

>From what I can see which is not all of the mill everything looks ok, before 
>amazon ask the group someone might have a spare
Spindle crank handle they could sell you

Bill

-Original Message-
From: legacy-ornamental-mills@googlegroups.com 
  
mailto:legacy-ornamental-mills@googlegroups.com> > On Behalf Of Eric Gantner
Sent: Thursday, 9 February 2023 9:38 AM
To: legacy-ornamental-mills@googlegroups.com 
 
Subject: Eric 900

Good Evening Gents,

I turned on 900 for the time today, big learning curve.  Come to find out I am 
missing a spindle shaft handle.  Pretty sure I  can order a handle from Amazon 
and make the hole bigger.  Please check out my pictures and please let me know 
if some is setup  incorrectly.  Thanks Eric Gantner

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
 .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/162E8720-81BE-467A-8E82-E46DA69579CC%40gmail.com.

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
 .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/001e01d93c15%24dec4cec0%249c4e6c40%24%40mmnet.com.au.

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
 .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAFcbDswYSqpQFku_33YZnDLmuKvGq5XvfB61vqF7%3DyQcpzz59Q%40mail.gmail.com
 

 .

-- 

Re: Eric 900

[Eric Gantner]

Bill,I need to recheck everything then, mine is not that smooth especially towards the tailstock end.  I will check out the video, thank you for the info.  EricSent from my iPadOn Feb 8, 2023, at 8:24 PM, bulke...@mmnet.com.au wrote:The first thing to check is when the both half nuts are disengaged and dyna-glide lubricated both saddles slide easily all the way in both directions they should not be tight one finger easy That takes all the strain off the half nuts and top hat slides and even the gearsthat is the best way to determine that your mill is most likely  assembled correct and working properly . always check this before starting any job this will greatly increase the life of all things made of Delrin on your mill. After a mount of time your mills slides will get tight even with cleaning dust builds up between the top hats where you can’t see and periodically will need clearing you can see me doing it on my revo mill here https://www.youtube.com/watch?v=3m0FrK1EGFg_channel=aussiman77181 in the middle of milling the wooden screw.it’s the same on regular mills the top hat rails are just on the side instead of on top they are cleaned the same way.So when you think your rails are clean and after it moves easy a small distance gets tight this is the problem. Bill  From: legacy-ornamental-mills@googlegroups.com  On Behalf Of Eric GantnerSent: Thursday, 9 February 2023 10:40 AMTo: legacy-ornamental-mills@googlegroups.comSubject: Re: Eric 900 Bill,  Thanks, I will also take pictures of the whole mill. Eric Gantner On Wed, Feb 8, 2023 at 6:34 PM  wrote:From what I can see which is not all of the mill everything looks ok, before amazon ask the group someone might have a spareSpindle crank handle they could sell youBill-Original Message-From: legacy-ornamental-mills@googlegroups.com  On Behalf Of Eric GantnerSent: Thursday, 9 February 2023 9:38 AMTo: legacy-ornamental-mills@googlegroups.comSubject: Eric 900Good Evening Gents,I turned on 900 for the time today, big learning curve.  Come to find out I am missing a spindle shaft handle.  Pretty sure I  can order a handle from Amazon and make the hole bigger.  Please check out my pictures and please let me know if some is setup  incorrectly.  Thanks Eric Gantner-- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group.To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com.To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/162E8720-81BE-467A-8E82-E46DA69579CC%40gmail.com.-- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group.To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com.To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/001e01d93c15%24dec4cec0%249c4e6c40%24%40mmnet.com.au.-- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group.To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com.To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/CAFcbDswYSqpQFku_33YZnDLmuKvGq5XvfB61vqF7%3DyQcpzz59Q%40mail.gmail.com.



-- 
You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/01d93c25%244b9b0f50%24e2d12df0%24%40mmnet.com.au.




-- 
You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/FA7F9EF6-8E1B-4198-B9EB-F36FE229BE6B%40gmail.com.

Re: Eric 900

[Eric Gantner]

Bill, Yep I already fixed that, based on information posted last week or the week before.  Thanks. EricSent from my iPadOn Feb 8, 2023, at 8:57 PM, bulke...@mmnet.com.au wrote:All seems ok I cant see the rail grooves but where ever a Delrin bush slides a groove should be there If its all working ok then you post likely have it assembled correctly Bill From: legacy-ornamental-mills@googlegroups.com  On Behalf Of Eric GantnerSent: Thursday, 9 February 2023 11:59 AMTo: legacy-ornamental-mills@googlegroups.comSubject: Re: Eric 900 Here are pics of the mill itself. Sent from my iPadOn Feb 8, 2023, at 7:16 PM, Tim Ziegler  wrote:Pix are worth a thousand words  On Wed, Feb 8, 2023, 5:40 PM Eric Gantner  wrote:Bill,  Thanks, I will also take pictures of the whole mill. Eric Gantner On Wed, Feb 8, 2023 at 6:34 PM  wrote:From what I can see which is not all of the mill everything looks ok, before amazon ask the group someone might have a spareSpindle crank handle they could sell youBill-Original Message-From: legacy-ornamental-mills@googlegroups.com  On Behalf Of Eric GantnerSent: Thursday, 9 February 2023 9:38 AMTo: legacy-ornamental-mills@googlegroups.comSubject: Eric 900Good Evening Gents,I turned on 900 for the time today, big learning curve.  Come to find out I am missing a spindle shaft handle.  Pretty sure I  can order a handle from Amazon and make the hole bigger.  Please check out my pictures and please let me know if some is setup  incorrectly.  Thanks Eric Gantner-- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group.To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com.To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/162E8720-81BE-467A-8E82-E46DA69579CC%40gmail.com.-- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group.To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com.To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/001e01d93c15%24dec4cec0%249c4e6c40%24%40mmnet.com.au.-- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group.To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com.To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/CAFcbDswYSqpQFku_33YZnDLmuKvGq5XvfB61vqF7%3DyQcpzz59Q%40mail.gmail.com.-- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group.To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com.To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLEqRx_8S4Rd0nwzMdzwV5YT2PhmzjDD%2BCA-Lg5w3nEL-w%40mail.gmail.com.-- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group.To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com.To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/7E447FDE-2C8D-429D-BB43-B72F70AA1ACC%40gmail.com.



-- 
You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/001201d93c29%24a482edf0%24ed88c9d0%24%40mmnet.com.au.




-- 
You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/81B2DB0D-1245-4AA5-BAA1-9C58AECE65F5%40gmail.com.

RE: Eric 900

[bulkeley]

The first thing to check is when the both half nuts are disengaged and 
dyna-glide lubricated both saddles slide easily all the way in both directions

they should not be tight one finger easy That takes all the strain off the half 
nuts and top hat slides and even the gears

that is the best way to determine that your mill is most likely  assembled 
correct and working properly . always check this before starting any job this 
will greatly increase the life of all things made of Delrin on your mill.

After a mount of time your mills slides will get tight even with cleaning dust 
builds up between the top hats where you can’t see and periodically will need 
clearing you can see me doing it on my revo mill here 
https://www.youtube.com/watch?v=3m0FrK1EGFg 
 
_channel=aussiman77181 in the middle of milling the wooden screw.

it’s the same on regular mills the top hat rails are just on the side instead 
of on top they are cleaned the same way.

So when you think your rails are clean and after it moves easy a small distance 
gets tight this is the problem.

 

Bill

 

 

From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of Eric Gantner
Sent: Thursday, 9 February 2023 10:40 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Eric 900

 

Bill, 

 

Thanks, I will also take pictures of the whole mill.

 

Eric Gantner

 

On Wed, Feb 8, 2023 at 6:34 PM mailto:bulke...@mmnet.com.au> > wrote:

>From what I can see which is not all of the mill everything looks ok, before 
>amazon ask the group someone might have a spare
Spindle crank handle they could sell you

Bill

-Original Message-
From: legacy-ornamental-mills@googlegroups.com 
  
mailto:legacy-ornamental-mills@googlegroups.com> > On Behalf Of Eric Gantner
Sent: Thursday, 9 February 2023 9:38 AM
To: legacy-ornamental-mills@googlegroups.com 
 
Subject: Eric 900

Good Evening Gents,

I turned on 900 for the time today, big learning curve.  Come to find out I am 
missing a spindle shaft handle.  Pretty sure I  can order a handle from Amazon 
and make the hole bigger.  Please check out my pictures and please let me know 
if some is setup  incorrectly.  Thanks Eric Gantner

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
 .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/162E8720-81BE-467A-8E82-E46DA69579CC%40gmail.com.

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
 .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/001e01d93c15%24dec4cec0%249c4e6c40%24%40mmnet.com.au.

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
 .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAFcbDswYSqpQFku_33YZnDLmuKvGq5XvfB61vqF7%3DyQcpzz59Q%40mail.gmail.com
 

 .

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/01d93c25%244b9b0f50%24e2d12df0%24%40mmnet.com.au.

Re: Eric 900

[Tim Ziegler]

Pix are worth a thousand words


On Wed, Feb 8, 2023, 5:40 PM Eric Gantner 
wrote:

> Bill,
>
> Thanks, I will also take pictures of the whole mill.
>
> Eric Gantner
>
> On Wed, Feb 8, 2023 at 6:34 PM  wrote:
>
>> From what I can see which is not all of the mill everything looks ok,
>> before amazon ask the group someone might have a spare
>> Spindle crank handle they could sell you
>>
>> Bill
>>
>> -Original Message-
>> From: legacy-ornamental-mills@googlegroups.com <
>> legacy-ornamental-mills@googlegroups.com> On Behalf Of Eric Gantner
>> Sent: Thursday, 9 February 2023 9:38 AM
>> To: legacy-ornamental-mills@googlegroups.com
>> Subject: Eric 900
>>
>> Good Evening Gents,
>>
>> I turned on 900 for the time today, big learning curve.  Come to find out
>> I am missing a spindle shaft handle.  Pretty sure I  can order a handle
>> from Amazon and make the hole bigger.  Please check out my pictures and
>> please let me know if some is setup  incorrectly.  Thanks Eric Gantner
>>
>> --
>> You received this message because you are subscribed to the Google Groups
>> "Legacy Ornamental Mills" group.
>> To unsubscribe from this group and stop receiving emails from it, send an
>> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
>> To view this discussion on the web visit
>> https://groups.google.com/d/msgid/legacy-ornamental-mills/162E8720-81BE-467A-8E82-E46DA69579CC%40gmail.com
>> .
>>
>> --
>> You received this message because you are subscribed to the Google Groups
>> "Legacy Ornamental Mills" group.
>> To unsubscribe from this group and stop receiving emails from it, send an
>> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
>> To view this discussion on the web visit
>> https://groups.google.com/d/msgid/legacy-ornamental-mills/001e01d93c15%24dec4cec0%249c4e6c40%24%40mmnet.com.au
>> .
>>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/CAFcbDswYSqpQFku_33YZnDLmuKvGq5XvfB61vqF7%3DyQcpzz59Q%40mail.gmail.com
> 
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLEqRx_8S4Rd0nwzMdzwV5YT2PhmzjDD%2BCA-Lg5w3nEL-w%40mail.gmail.com.

Re: Eric 900

[Tim Ziegler]

Yeah I can ck my stash but no promises.


On Wed, Feb 8, 2023, 5:34 PM  wrote:

> From what I can see which is not all of the mill everything looks ok,
> before amazon ask the group someone might have a spare
> Spindle crank handle they could sell you
>
> Bill
>
> -Original Message-
> From: legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> On Behalf Of Eric Gantner
> Sent: Thursday, 9 February 2023 9:38 AM
> To: legacy-ornamental-mills@googlegroups.com
> Subject: Eric 900
>
> Good Evening Gents,
>
> I turned on 900 for the time today, big learning curve.  Come to find out
> I am missing a spindle shaft handle.  Pretty sure I  can order a handle
> from Amazon and make the hole bigger.  Please check out my pictures and
> please let me know if some is setup  incorrectly.  Thanks Eric Gantner
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/162E8720-81BE-467A-8E82-E46DA69579CC%40gmail.com
> .
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/001e01d93c15%24dec4cec0%249c4e6c40%24%40mmnet.com.au
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLEwVAD8G70R3GAnWttT5OPHgPjaZKRn_FF90420kok-yA%40mail.gmail.com.

Re: Metal Drive Gears

[Tim Ziegler]

Yes the others are available. It just takes a bit to get them.

On Wed, Feb 8, 2023, 3:10 PM  wrote:

> $140 for the set, that’s $20 a gear I think that is quite reasonable a
> laser cutter elsewhere would be a great deal more I would think, so it
> looks like the gears are still available from legacy the drive gears anyway
>
> So any other gears like the .25 or the 2X gears its highly possible they
> might be available too.
>
> For that price I wouldn’t bother making any kind of plastic gears unless
> just for fun because no matter what we make the metal gears will always be
> the best.
>
>
>
> Bill
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Tim Ziegler
> *Sent:* Thursday, 9 February 2023 4:24 AM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* Re: Metal Drive Gears
>
>
>
> Hey Ken that includes only the Drive gears, A, B, C, D, E, F, & G
>
> thanks for asking
>
>
> Kind Regards,
>
>
>
> Timothy J. Ziegler
>
> Ziegler WoodWork & Specialty
>
> 14171 160th Ave.
>
> Foreston MN 56330
>
>
>
> 320-294-5798 shop
>
> 320-630-2243 cell
>
>
>
>
>
> On Wed, Feb 8, 2023 at 6:44 AM Ken and Diana  wrote:
>
> What gears are included for this price? Thanks
>
>
>
> On Wed, Feb 8, 2023 at 7:07 AM Tim Ziegler  wrote:
>
> Just emailed Cindy yesterday, and asked if we can still get metal drive
> gears.
>
> Yes we can still get them. Takes about a month of turn around to get them
> made.
>
> $140.00 per set. So anyone interested they are available.
>
> My suggestion is get them ordered if you want metal gears.
>
>
> Kind Regards,
>
>
>
> Timothy J. Ziegler
>
> Ziegler WoodWork & Specialty
>
> 14171 160th Ave.
>
> Foreston MN 56330
>
>
>
> 320-294-5798 shop
>
> 320-630-2243 cell
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLHSTV%2B4P5JFV26%2BPh5uTtQdvo%2BL2os-zPE1by5hdHdsjA%40mail.gmail.com
> 
> .
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/CAE5s5cv8qkATO_9SS5AJ%3D6RJh5nQOgaOW22pZJOHOS199bZzLQ%40mail.gmail.com
> 
> .
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLFeP8PVRG1kMmQEtiKN4Fy9w9zWg9bTznz_JorN0_DMZA%40mail.gmail.com
> 
> .
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/01d93c01%24b9fed5e0%242dfc81a0%24%40mmnet.com.au
> 
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLHAj3gLOt16nKXWN%3DixFesK6_cfQT9YMGp-nVWrErmt6Q%40mail.gmail.com.

Re: Eric 900

[Eric Gantner]

Bill,

Thanks, I will also take pictures of the whole mill.

Eric Gantner

On Wed, Feb 8, 2023 at 6:34 PM  wrote:

> From what I can see which is not all of the mill everything looks ok,
> before amazon ask the group someone might have a spare
> Spindle crank handle they could sell you
>
> Bill
>
> -Original Message-
> From: legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> On Behalf Of Eric Gantner
> Sent: Thursday, 9 February 2023 9:38 AM
> To: legacy-ornamental-mills@googlegroups.com
> Subject: Eric 900
>
> Good Evening Gents,
>
> I turned on 900 for the time today, big learning curve.  Come to find out
> I am missing a spindle shaft handle.  Pretty sure I  can order a handle
> from Amazon and make the hole bigger.  Please check out my pictures and
> please let me know if some is setup  incorrectly.  Thanks Eric Gantner
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/162E8720-81BE-467A-8E82-E46DA69579CC%40gmail.com
> .
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/001e01d93c15%24dec4cec0%249c4e6c40%24%40mmnet.com.au
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAFcbDswYSqpQFku_33YZnDLmuKvGq5XvfB61vqF7%3DyQcpzz59Q%40mail.gmail.com.

RE: Eric 900

[bulkeley]

>From what I can see which is not all of the mill everything looks ok, before 
>amazon ask the group someone might have a spare
Spindle crank handle they could sell you

Bill

-Original Message-
From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of Eric Gantner
Sent: Thursday, 9 February 2023 9:38 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: Eric 900

Good Evening Gents,

I turned on 900 for the time today, big learning curve.  Come to find out I am 
missing a spindle shaft handle.  Pretty sure I  can order a handle from Amazon 
and make the hole bigger.  Please check out my pictures and please let me know 
if some is setup  incorrectly.  Thanks Eric Gantner

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/162E8720-81BE-467A-8E82-E46DA69579CC%40gmail.com.

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/001e01d93c15%24dec4cec0%249c4e6c40%24%40mmnet.com.au.

RE: Metal Drive Gears

[bulkeley]

$140 for the set, that’s $20 a gear I think that is quite reasonable a laser 
cutter elsewhere would be a great deal more I would think, so it looks like the 
gears are still available from legacy the drive gears anyway

So any other gears like the .25 or the 2X gears its highly possible they might 
be available too.

For that price I wouldn’t bother making any kind of plastic gears unless just 
for fun because no matter what we make the metal gears will always be the best.

 

Bill 

 

From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of Tim Ziegler
Sent: Thursday, 9 February 2023 4:24 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Metal Drive Gears

 

Hey Ken that includes only the Drive gears, A, B, C, D, E, F, & G

thanks for asking




Kind Regards,

 

Timothy J. Ziegler

Ziegler WoodWork & Specialty

14171 160th Ave.

Foreston MN 56330

 

320-294-5798 shop

320-630-2243 cell

 

 

On Wed, Feb 8, 2023 at 6:44 AM Ken and Diana mailto:mman7...@gmail.com> > wrote:

What gears are included for this price? Thanks

 

On Wed, Feb 8, 2023 at 7:07 AM Tim Ziegler mailto:timjzieg...@gmail.com> > wrote:

Just emailed Cindy yesterday, and asked if we can still get metal drive gears. 

Yes we can still get them. Takes about a month of turn around to get them made. 

$140.00 per set. So anyone interested they are available. 

My suggestion is get them ordered if you want metal gears. 




Kind Regards,

 

Timothy J. Ziegler

Ziegler WoodWork & Specialty

14171 160th Ave.

Foreston MN 56330

 

320-294-5798 shop

320-630-2243 cell

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
 .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLHSTV%2B4P5JFV26%2BPh5uTtQdvo%2BL2os-zPE1by5hdHdsjA%40mail.gmail.com
 

 .

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
 .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAE5s5cv8qkATO_9SS5AJ%3D6RJh5nQOgaOW22pZJOHOS199bZzLQ%40mail.gmail.com
 

 .

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
 .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLFeP8PVRG1kMmQEtiKN4Fy9w9zWg9bTznz_JorN0_DMZA%40mail.gmail.com
 

 .

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/01d93c01%24b9fed5e0%242dfc81a0%24%40mmnet.com.au.

Re: Metal Drive Gears

[Tim Ziegler]

Hey Ken that includes only the Drive gears, A, B, C, D, E, F, & G
thanks for asking

Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Wed, Feb 8, 2023 at 6:44 AM Ken and Diana  wrote:

> What gears are included for this price? Thanks
>
> On Wed, Feb 8, 2023 at 7:07 AM Tim Ziegler  wrote:
>
>> Just emailed Cindy yesterday, and asked if we can still get metal drive
>> gears.
>> Yes we can still get them. Takes about a month of turn around to get them
>> made.
>> $140.00 per set. So anyone interested they are available.
>> My suggestion is get them ordered if you want metal gears.
>>
>> Kind Regards,
>>
>> Timothy J. Ziegler
>> Ziegler WoodWork & Specialty
>> 14171 160th Ave.
>> Foreston MN 56330
>>
>> 320-294-5798 shop
>> 320-630-2243 cell
>>
>> --
>> You received this message because you are subscribed to the Google Groups
>> "Legacy Ornamental Mills" group.
>> To unsubscribe from this group and stop receiving emails from it, send an
>> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
>> To view this discussion on the web visit
>> https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLHSTV%2B4P5JFV26%2BPh5uTtQdvo%2BL2os-zPE1by5hdHdsjA%40mail.gmail.com
>> 
>> .
>>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/CAE5s5cv8qkATO_9SS5AJ%3D6RJh5nQOgaOW22pZJOHOS199bZzLQ%40mail.gmail.com
> 
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLFeP8PVRG1kMmQEtiKN4Fy9w9zWg9bTznz_JorN0_DMZA%40mail.gmail.com.

Re: French rolling pins

[Owner]

FYI; French rolling pins are tapered having researched and made scores of them 
for resale.

Michael Kratky
119 Riverview Rd., 
Northville, N.Y. 12134

518 863-2821
text 518 207-7247

Email;
krat...@roadrunner.com



> On Feb 8, 2023, at 1:22 AM, bulke...@mmnet.com.au wrote:
> 
> Looks great what dia are they
>  
> Bill
>  
> From: legacy-ornamental-mills@googlegroups.com 
>  
>  > On Behalf Of Mike Newman
> Sent: Wednesday, 8 February 2023 2:52 PM
> To: Legacy Ornamental Mills  >
> Subject: French rolling pins
>  
> Tried out my recently acquired std hub and 4 prong bracket on my 1200 
> tonight.  They worked great and I love the concept.  I made a couple of 
> simple french rolling pins out of walnut and butternut.  I used to make these 
> when I had my sawmill and live edge woodworking business and they sold pretty 
> well.  
> 
> -- 
> You received this message because you are subscribed to the Google Groups 
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an 
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com 
> .
> To view this discussion on the web visit 
> https://groups.google.com/d/msgid/legacy-ornamental-mills/59e8804d-b110-44dc-8fd8-4640ba1428e3n%40googlegroups.com
>  
> .
> 
> -- 
> You received this message because you are subscribed to the Google Groups 
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an 
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com 
> .
> To view this discussion on the web visit 
> https://groups.google.com/d/msgid/legacy-ornamental-mills/001001d93b85%24b669b390%24233d1ab0%24%40mmnet.com.au
>  
> .

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/1BBD2F4D-B8A0-496F-A351-64A8DCFC9708%40roadrunner.com.

Re: Metal Drive Gears

[Ken and Diana]

What gears are included for this price? Thanks

On Wed, Feb 8, 2023 at 7:07 AM Tim Ziegler  wrote:

> Just emailed Cindy yesterday, and asked if we can still get metal drive
> gears.
> Yes we can still get them. Takes about a month of turn around to get them
> made.
> $140.00 per set. So anyone interested they are available.
> My suggestion is get them ordered if you want metal gears.
>
> Kind Regards,
>
> Timothy J. Ziegler
> Ziegler WoodWork & Specialty
> 14171 160th Ave.
> Foreston MN 56330
>
> 320-294-5798 shop
> 320-630-2243 cell
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLHSTV%2B4P5JFV26%2BPh5uTtQdvo%2BL2os-zPE1by5hdHdsjA%40mail.gmail.com
> 
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAE5s5cv8qkATO_9SS5AJ%3D6RJh5nQOgaOW22pZJOHOS199bZzLQ%40mail.gmail.com.

Metal Drive Gears

[Tim Ziegler]

Just emailed Cindy yesterday, and asked if we can still get metal drive
gears.
Yes we can still get them. Takes about a month of turn around to get them
made.
$140.00 per set. So anyone interested they are available.
My suggestion is get them ordered if you want metal gears.

Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLHSTV%2B4P5JFV26%2BPh5uTtQdvo%2BL2os-zPE1by5hdHdsjA%40mail.gmail.com.