Re: Last Chance: Woodchuck

[Rick Waters]

Hi Tim,
I already promised it to Mike a few hours ago. Sorry. It went quickly.

On Mon, Nov 29, 2021 at 3:07 PM Tim Ziegler  wrote:

> Hey Rick do you still have this?
> I may figure out a way to come get it. I'm building another machine and
> several items of this
> also would work on my WoodChuck.
> I'd like you to hold on until I get back to you if possible.
> Thanks
> Kind Regards,
>
> Timothy J. Ziegler
> Ziegler WoodWork & Specialty
> 14171 160th Ave.
> Foreston MN 56330
>
> 320-294-5798 shop
> 320-630-2243 cell
>
>
> On Mon, Nov 29, 2021 at 2:48 PM Jeff Richmond 
> wrote:
>
>> I didn’t see Ricks original message come through and it is much too far
>> for me to even consider but that sure is generous for a lucky user group
>> member. Pay it forward.
>>
>> Jeff from Connecticut
>>
>> On Nov 29, 2021, at 12:04 PM, Okla Mike (Liltwisted) <
>> legacym...@iglide.net> wrote:
>>
>> 
>>
>> Sent you an email to pick it up Friday.  Hope it is still available
>>
>> Mike OK
>> On 11/29/2021 10:31 AM, Rick Waters wrote:
>>
>> Hi everyone,
>> The time has finally come that the woodchuck has to go. It's taking up
>> too much room in the garage and I never actually used it. It's been sitting
>> there for about 3 to 5 years and it comes with everything you see in the
>> pictures. If anybody wants to come down to Naperville Illinois they can
>> have it for free. I will not be able to meet you anywhere with it, or truck
>> it across the country. And I'm just generally unwilling to ship it. But if
>> you want it it's yours.
>>
>> Pictures:
>> https://www.dropbox.com/sh/74wg2kigsu01og0/AABmhLV_BbnqmlwkaL91iKGfa?dl=0
>>
>> Rick
>> --
>> You received this message because you are subscribed to the Google Groups
>> "Legacy Ornamental Mills" group.
>> To unsubscribe from this group and stop receiving emails from it, send an
>> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
>> To view this discussion on the web visit
>> https://groups.google.com/d/msgid/legacy-ornamental-mills/CAM0xKs89%2BuP7gdRbir%2BdWWD2XggZr7%2BsVSa0RmzvB2bN08_K%2Bg%40mail.gmail.com
>> <https://groups.google.com/d/msgid/legacy-ornamental-mills/CAM0xKs89%2BuP7gdRbir%2BdWWD2XggZr7%2BsVSa0RmzvB2bN08_K%2Bg%40mail.gmail.com?utm_medium=email_source=footer>
>> .
>>
>> --
>> You received this message because you are subscribed to the Google Groups
>> "Legacy Ornamental Mills" group.
>> To unsubscribe from this group and stop receiving emails from it, send an
>> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
>> To view this discussion on the web visit
>> https://groups.google.com/d/msgid/legacy-ornamental-mills/fc15e287-7856-a2a4-9843-9b38b6f5f86b%40iglide.net
>> <https://groups.google.com/d/msgid/legacy-ornamental-mills/fc15e287-7856-a2a4-9843-9b38b6f5f86b%40iglide.net?utm_medium=email_source=footer>
>> .
>>
>> --
>> You received this message because you are subscribed to the Google Groups
>> "Legacy Ornamental Mills" group.
>> To unsubscribe from this group and stop receiving emails from it, send an
>> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
>> To view this discussion on the web visit
>> https://groups.google.com/d/msgid/legacy-ornamental-mills/1412CBC1-45A0-40B5-8700-D7D9D267DB01%40gmail.com
>> <https://groups.google.com/d/msgid/legacy-ornamental-mills/1412CBC1-45A0-40B5-8700-D7D9D267DB01%40gmail.com?utm_medium=email_source=footer>
>> .
>>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLEPBETdJgnZFUd%2BAcfTo7Hqb0xxgaXoAxE3sHn-ubKcAQ%40mail.gmail.com
> <https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLEPBETdJgnZFUd%2BAcfTo7Hqb0xxgaXoAxE3sHn-ubKcAQ%40mail.gmail.com?utm_medium=email_source=footer>
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAM0xKs_MEDCuWRcFc3mzmrhCGfpTvnLkZsVVMEdosxTwpyv3ag%40mail.gmail.com.

Last Chance: Woodchuck

[Rick Waters]

Hi everyone,
The time has finally come that the woodchuck has to go. It's taking up too
much room in the garage and I never actually used it. It's been sitting
there for about 3 to 5 years and it comes with everything you see in the
pictures. If anybody wants to come down to Naperville Illinois they can
have it for free. I will not be able to meet you anywhere with it, or truck
it across the country. And I'm just generally unwilling to ship it. But if
you want it it's yours.

Pictures:
https://www.dropbox.com/sh/74wg2kigsu01og0/AABmhLV_BbnqmlwkaL91iKGfa?dl=0

Rick

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAM0xKs89%2BuP7gdRbir%2BdWWD2XggZr7%2BsVSa0RmzvB2bN08_K%2Bg%40mail.gmail.com.

Re: test

[Rick Waters]

Passed

On Sun, Oct 17, 2021 at 10:12 AM Tom Dotta  wrote:

> they do make their way to CaliforniaCheers Tom
>
> On Sun, Oct 17, 2021 at 8:09 AM 'Curt George' via Legacy Ornamental Mills <
> legacy-ornamental-mills@googlegroups.com> wrote:
>
>> I wouldn't ignore you. ;-p
>>
>> C.A.G.
>>
>> On Sunday, October 17, 2021, 03:06:38 AM EDT, bulke...@mmnet.com.au <
>> bulke...@mmnet.com.au> wrote:
>>
>>
>> Just doing a test to see if my emails are getting out please ignore
>>
>>
>>
>> Bill
>>
>> --
>> You received this message because you are subscribed to the Google Groups
>> "Legacy Ornamental Mills" group.
>> To unsubscribe from this group and stop receiving emails from it, send an
>> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
>> To view this discussion on the web visit
>> https://groups.google.com/d/msgid/legacy-ornamental-mills/01d7c2dd%241ec49680%245c4dc380%24%40mmnet.com.au
>> 
>> .
>>
>> --
>> You received this message because you are subscribed to the Google Groups
>> "Legacy Ornamental Mills" group.
>> To unsubscribe from this group and stop receiving emails from it, send an
>> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
>> To view this discussion on the web visit
>> https://groups.google.com/d/msgid/legacy-ornamental-mills/1646599926.1972270.1634483352411%40mail.yahoo.com
>> 
>> .
>>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/CAFAyw7raqJ4C62pkw8QsJd4%3DO2nBRTQN3ODdn4bpFyLE88FH1g%40mail.gmail.com
> 
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAM0xKs-1ZM0nCrVHjciR-SUyUM-wcR-PXWOmzCXTGZHgDydQkw%40mail.gmail.com.

Sadly, Selling my Woodchuck

[Rick Waters]

Dear LOM Members,
I've decided to sell my Woodchuck.  It wasn't an easy decision.  It just
has to be done.  BTW, if anyone wants the giant fan in some of the
pictures, let me know.
If you want the Woodchuck, make me an offer (I'll probably take the first
offer from anyone that will come pick it up from my driveway.  I live in
Naperville, IL, USA).
Here's a link to a Dropbox folder with pictures of what I'm including
(except for that router base in one of the pictures):
https://www.dropbox.com/sh/74wg2kigsu01og0/AABmhLV_BbnqmlwkaL91iKGfa?dl=0
Everything I have is in the pictures.  I don't have any other gears or
parts.  Base comes with it.

Short story:
I need the space in my garage.
I never used it.  I REALLY meant to, but I need to be honest with myself -
I'll never get around to using it.

Long story:
I bought the Woodchuck so I could make pool cues for my sons.  They have
never asked me to make anything for them, thought I've been a fine
woodworker and turner since 2007.
A couple of months after buying the machine (which was missing some key
parts), I was diagnosed with colon cancer.
My whole life was put on hold.  I'd just achieved a HUGE career goal (sorta
like getting my PhD in my field), but I had to keep my crappy 9-5 job
because of the health insurance.
About a year later, after several surgeries and a long round of chemo, I
returned to woodworking and bought a crank handle from Mike Pung.  I bought
a couple other missing parts too.  Right about the time I was ready to get
to the Woodchuck in earnest, the cancer came back.
This time, the surgery turned into 4 surgeries (one was life-saving as the
first surgery nearly killed me).  I spent part of last December, and ALL of
January 2020 in a hospital bed.  I was 220lbs last December.  In February
of this year, I was 175lbs and still losing weight, in a wheelchair, and
super depressed.
I rebounded slowly, and just got back to woodworking about 8 weeks ago -
just turning pens.  I look at the Woodchuck every time I go into the
garage, and I know I won't be around long enough to put it to use.
I'm not pitying myself, and I am definitely not looking for pity.  I know
that the machine will see a better new life with this community, rather
than going to any other forum.

Love you all,
Rick Waters

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAM0xKs_WZaGnx3pNSb2ckrPLJnm%3D_GLyjOHBHMZg%3D0XUCYkNsg%40mail.gmail.com.

Re: Bat Master

[Rick Waters]

I actually wasn't advocating FOR the Laguna.  I was more calling attention
to what is being made available to consumers, and the astronomical price.

On Thu, Apr 30, 2020 at 2:28 PM 'joe biunno' via Legacy Ornamental Mills <
legacy-ornamental-mills@googlegroups.com> wrote:

> Well, I certainly am one to praise the capabilities and benefits of any
> Legacy piece of equipment, CNC or manual... but in regards to the speed of
> production and quality of finish, that Laguna piece of equipment far
> exceeds what the Legacy can do... if you need a machine to do strictly
> turned, production type work, the Legacy is not the way to go... in my
> opinion... but if the work has a certain type of odd shaped design or needs
> after-turned milling cuts, then the Legacy is certainly in the mix
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/3f8e3df1-ea5e-4500-b923-0621c8b38b50%40googlegroups.com
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAM0xKs9%3DeCwn7cqSEaq%3DzLRCvHzFpF1H2Wt99uBySOZzCbF39Q%40mail.gmail.com.

Bat Master

[Rick Waters]

Laguna just came out with the Bat Master. CNC lathe that originally was
used to make bats, but can make anything long and round.  Get ready for a
jaw-dropping price tag though ($29k USD).

https://lagunatools.com/cnc/speciality-machines/bat-master/

Rick

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAM0xKs_HkMpkjdKwr0LRw%3D8sRDvFUvQkqpanagkpOa8zLfk-zA%40mail.gmail.com.

Re: Round 2: Woodchuck for sale

[Rick Waters]

Awesome!  Thank you Steve!
I think we can put these threads to bed now.

On Fri, Aug 30, 2019 at 6:58 AM Steve Drake  wrote:

> I have already arranged with the auctioneer and my work to pick it up on
> Tuesday morning.   Thanks Rick for the chance.   Bill, contact me privately
> if you are needing some parts or something.   I'm in the DC area if that
> helps.
>
> On Thursday, August 29, 2019 at 11:51:59 AM UTC-4, Rick Waters wrote:
>>
>> Well, Steve Drake has expressed an interest also.
>> I'm not too concerned as to who gets it, rather that it doesn't wind up
>> in a dumpster.
>> Steve, can you chime in as to if you are going to be able to pick it up?
>>
>> On Thu, Aug 29, 2019 at 10:47 AM 'Bill Hallow' via Legacy Ornamental
>> Mills  wrote:
>>
>>> Rick,
>>>If it’s not already spoken for I would like to have it.   I live
>>> close enough to York for it to be an easy pick it up.  I will be in York on
>>> September 16 which will be the most convenient time for me to pick it up,
>>> but if necessary I could make a separate trip next week to pick it up.
>>>Bill Hallow
>>>
>>>
>>> On Wednesday, August 28, 2019, 05:07:15 PM EDT, Ray Leaman <
>>> vie...@gmail.com> wrote:
>>>
>>>
>>> OK.  Thanks.  I'll pass.
>>>
>>> On Friday, July 19, 2019 at 3:01:03 PM UTC-4, Rick Waters wrote:
>>>
>>> OK, so I won that auction, where the "flutter" (LOL) or more
>>> appropriately, the Woodchuck, was for sale on IRS Auctions.  I got it for a
>>> steal, $50.  $72 total, with tax and stuff.  But, I'm not sure why I
>>> thought it was located in Indian, but I did.  It's actually in York, PA.
>>>
>>> It's going to cost way too much for me to go to York, pick it up and
>>> transport it back.  Also, it's not worth it to pay someone to package it up
>>> and ship it.
>>>
>>> So...  It may be your lucky day!  If you are near enough to York, PA, to
>>> pick it up.  You can have this 'parts' machine for the low, low price of 1
>>> Thank You.  I know it's a high price for some, but that's the price.  Firm
>>> :)
>>>
>>> I might be able to send pic, if I can still access the auction.  But,
>>> it's an old woodchuck with a crank handle.  Plus an external motor attached
>>> to the large gear.  Original stand included.
>>>
>>> Rick W.
>>>
>>> --
>>> You received this message because you are subscribed to the Google
>>> Groups "Legacy Ornamental Mills" group.
>>> To unsubscribe from this group and stop receiving emails from it, send
>>> an email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
>>> To view this discussion on the web visit
>>> https://groups.google.com/d/msgid/legacy-ornamental-mills/e4296973-881b-4776-ad8d-625e503ec395%40googlegroups.com
>>> <https://groups.google.com/d/msgid/legacy-ornamental-mills/e4296973-881b-4776-ad8d-625e503ec395%40googlegroups.com?utm_medium=email_source=footer>
>>> .
>>>
>>> --
>>> You received this message because you are subscribed to the Google
>>> Groups "Legacy Ornamental Mills" group.
>>> To unsubscribe from this group and stop receiving emails from it, send
>>> an email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
>>> To view this discussion on the web visit
>>> https://groups.google.com/d/msgid/legacy-ornamental-mills/1460773864.498625.1567093666233%40mail.yahoo.com
>>> <https://groups.google.com/d/msgid/legacy-ornamental-mills/1460773864.498625.1567093666233%40mail.yahoo.com?utm_medium=email_source=footer>
>>> .
>>>
>> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/24884636-1a17-4e9a-a1a8-1f60882f1e5b%40googlegroups.com
> <https://groups.google.com/d/msgid/legacy-ornamental-mills/24884636-1a17-4e9a-a1a8-1f60882f1e5b%40googlegroups.com?utm_medium=email_source=footer>
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAM0xKs9xQnBQ0%2B98EKumt4MU3qiXgCp%3D0kY%2Bkdv5dqp7%2BQXx2A%40mail.gmail.com.

Re: Round 2: Woodchuck for sale

[Rick Waters]

Well, Steve Drake has expressed an interest also.
I'm not too concerned as to who gets it, rather that it doesn't wind up in
a dumpster.
Steve, can you chime in as to if you are going to be able to pick it up?

On Thu, Aug 29, 2019 at 10:47 AM 'Bill Hallow' via Legacy Ornamental Mills <
legacy-ornamental-mills@googlegroups.com> wrote:

> Rick,
>If it’s not already spoken for I would like to have it.   I live close
> enough to York for it to be an easy pick it up.  I will be in York on
> September 16 which will be the most convenient time for me to pick it up,
> but if necessary I could make a separate trip next week to pick it up.
>Bill Hallow
>
>
> On Wednesday, August 28, 2019, 05:07:15 PM EDT, Ray Leaman <
> view...@gmail.com> wrote:
>
>
> OK.  Thanks.  I'll pass.
>
> On Friday, July 19, 2019 at 3:01:03 PM UTC-4, Rick Waters wrote:
>
> OK, so I won that auction, where the "flutter" (LOL) or more
> appropriately, the Woodchuck, was for sale on IRS Auctions.  I got it for a
> steal, $50.  $72 total, with tax and stuff.  But, I'm not sure why I
> thought it was located in Indian, but I did.  It's actually in York, PA.
>
> It's going to cost way too much for me to go to York, pick it up and
> transport it back.  Also, it's not worth it to pay someone to package it up
> and ship it.
>
> So...  It may be your lucky day!  If you are near enough to York, PA, to
> pick it up.  You can have this 'parts' machine for the low, low price of 1
> Thank You.  I know it's a high price for some, but that's the price.  Firm
> :)
>
> I might be able to send pic, if I can still access the auction.  But, it's
> an old woodchuck with a crank handle.  Plus an external motor attached to
> the large gear.  Original stand included.
>
> Rick W.
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/e4296973-881b-4776-ad8d-625e503ec395%40googlegroups.com
> <https://groups.google.com/d/msgid/legacy-ornamental-mills/e4296973-881b-4776-ad8d-625e503ec395%40googlegroups.com?utm_medium=email_source=footer>
> .
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/1460773864.498625.1567093666233%40mail.yahoo.com
> <https://groups.google.com/d/msgid/legacy-ornamental-mills/1460773864.498625.1567093666233%40mail.yahoo.com?utm_medium=email_source=footer>
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAM0xKs8GyqyD6T7t7N2YKJpGJkpDUJfboURNsw%3DcNRm%2BgUwK0g%40mail.gmail.com.

Re: Round 3: Woodchuck for FREE

[Rick Waters]

This is the only image left.  They took down the listing a while ago.
[image: image.png]

On Wed, Aug 28, 2019 at 3:18 PM Ray Leaman  wrote:

> So, can you post a picture or the original auction listing showing the
> unit?  Would be helpful. I may be going to Baltimore next month.  York is
> not too far from there.
>
> On Wed, Aug 28, 2019 at 4:05 PM Rick Waters  wrote:
>
>> They just need a copy of the paid invoice (which I have) and they need me
>> to tell them who is picking it up.
>> They said the deadline for picking it up was July 31st.  They called me
>> this morning asking if I was going to take it.  I said I'd have to find a
>> friend that really wanted it.  They said to just let them know who and
>> when.  Otherwise, they're going to throw it in a dumpster.
>>
>> On Wed, Aug 28, 2019 at 3:03 PM Ray Leaman  wrote:
>>
>>> What would somebody have to do to pick this unit up?  I thought IRS
>>> required pickup of auctioned items fairly shortly after a winning bid.
>>>
>>> On Wed, Aug 28, 2019 at 10:50 AM Rick Waters 
>>> wrote:
>>>
>>>> Ok, I was able to get anyone to say yes to this a month ago.  Let's see
>>>> now.
>>>>
>>>> This Woodchuck is paid for already.  All you have to do is go pick it
>>>> up.  I'm no longer interested in it, so if you want it, it's yours.
>>>>
>>>> It is located in York, PA.
>>>>
>>>> On Fri, Jul 19, 2019, 7:27 PM Tim Ziegler 
>>>> wrote:
>>>>
>>>>> Yup but for us Minnesotans that's a 4 day drive. Lol
>>>>>
>>>>> On Fri, Jul 19, 2019, 6:48 PM  wrote:
>>>>>
>>>>>> 775 miles that a short trip down the road here in aus 
>>>>>>
>>>>>>
>>>>>>
>>>>>> Bill
>>>>>>
>>>>>>
>>>>>>
>>>>>> *From:* legacy-ornamental-mills@googlegroups.com <
>>>>>> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *
>>>>>> rtjurg...@gmail.com
>>>>>> *Sent:* Saturday, 20 July 2019 9:39 AM
>>>>>> *To:* legacy-ornamental-mills@googlegroups.com
>>>>>> *Subject:* RE: Round 2: Woodchuck for sale
>>>>>>
>>>>>>
>>>>>>
>>>>>> My wife and I are sitting here eating dinner and I laughed and said
>>>>>> we shour make a run to York PA.
>>>>>>
>>>>>> Only 775 miles from here. Lol
>>>>>>
>>>>>>
>>>>>>
>>>>>> Sent from Yahoo Mail on Android
>>>>>> <https://go.onelink.me/107872968?pid=InProduct=Global_Internal_YGrowth_AndroidEmailSig__AndroidUsers_wl=ym_sub1=Internal_sub2=Global_YGrowth_sub3=EmailSignature>
>>>>>>
>>>>>>
>>>>>>
>>>>>> On Fri, Jul 19, 2019 at 6:35 PM, bulke...@mmnet.com.au
>>>>>>
>>>>>>  wrote:
>>>>>>
>>>>>> I understand but if no one can get it and you want to make a few
>>>>>> bucks back my offer stands I still need a couple of legacy motors.
>>>>>>
>>>>>>
>>>>>>
>>>>>> Bill
>>>>>>
>>>>>>
>>>>>>
>>>>>> *From:* legacy-ornamental-mills@googlegroups.com <
>>>>>> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Rick Waters
>>>>>> *Sent:* Saturday, 20 July 2019 9:21 AM
>>>>>> *To:* legacy-ornamental-mills@googlegroups.com
>>>>>> *Subject:* Re: Round 2: Woodchuck for sale
>>>>>>
>>>>>>
>>>>>>
>>>>>> That's the rub isn't it? I just want someone to pick it up and take
>>>>>> it home. No payment at all.
>>>>>>
>>>>>>
>>>>>>
>>>>>> On Fri, Jul 19, 2019, 6:16 PM  wrote:
>>>>>>
>>>>>> If you get some one to remove the motor and mounting bracket off that
>>>>>> woodchuck and ship it to you
>>>>>>
>>>>>> I will buy it from you for the $72 you want for the whole mill
>>>>>>
>>>>>>
>>>>>>
>>>>>> Bill
>>>>>>
>>>>>>
>>>>>>
>>>>>> *From:* legacy-ornam

Re: Round 3: Woodchuck for FREE

[Rick Waters]

They just need a copy of the paid invoice (which I have) and they need me
to tell them who is picking it up.
They said the deadline for picking it up was July 31st.  They called me
this morning asking if I was going to take it.  I said I'd have to find a
friend that really wanted it.  They said to just let them know who and
when.  Otherwise, they're going to throw it in a dumpster.

On Wed, Aug 28, 2019 at 3:03 PM Ray Leaman  wrote:

> What would somebody have to do to pick this unit up?  I thought IRS
> required pickup of auctioned items fairly shortly after a winning bid.
>
> On Wed, Aug 28, 2019 at 10:50 AM Rick Waters 
> wrote:
>
>> Ok, I was able to get anyone to say yes to this a month ago.  Let's see
>> now.
>>
>> This Woodchuck is paid for already.  All you have to do is go pick it
>> up.  I'm no longer interested in it, so if you want it, it's yours.
>>
>> It is located in York, PA.
>>
>> On Fri, Jul 19, 2019, 7:27 PM Tim Ziegler  wrote:
>>
>>> Yup but for us Minnesotans that's a 4 day drive. Lol
>>>
>>> On Fri, Jul 19, 2019, 6:48 PM  wrote:
>>>
>>>> 775 miles that a short trip down the road here in aus 
>>>>
>>>>
>>>>
>>>> Bill
>>>>
>>>>
>>>>
>>>> *From:* legacy-ornamental-mills@googlegroups.com <
>>>> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *
>>>> rtjurg...@gmail.com
>>>> *Sent:* Saturday, 20 July 2019 9:39 AM
>>>> *To:* legacy-ornamental-mills@googlegroups.com
>>>> *Subject:* RE: Round 2: Woodchuck for sale
>>>>
>>>>
>>>>
>>>> My wife and I are sitting here eating dinner and I laughed and said we
>>>> shour make a run to York PA.
>>>>
>>>> Only 775 miles from here. Lol
>>>>
>>>>
>>>>
>>>> Sent from Yahoo Mail on Android
>>>> <https://go.onelink.me/107872968?pid=InProduct=Global_Internal_YGrowth_AndroidEmailSig__AndroidUsers_wl=ym_sub1=Internal_sub2=Global_YGrowth_sub3=EmailSignature>
>>>>
>>>>
>>>>
>>>> On Fri, Jul 19, 2019 at 6:35 PM, bulke...@mmnet.com.au
>>>>
>>>>  wrote:
>>>>
>>>> I understand but if no one can get it and you want to make a few bucks
>>>> back my offer stands I still need a couple of legacy motors.
>>>>
>>>>
>>>>
>>>> Bill
>>>>
>>>>
>>>>
>>>> *From:* legacy-ornamental-mills@googlegroups.com <
>>>> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Rick Waters
>>>> *Sent:* Saturday, 20 July 2019 9:21 AM
>>>> *To:* legacy-ornamental-mills@googlegroups.com
>>>> *Subject:* Re: Round 2: Woodchuck for sale
>>>>
>>>>
>>>>
>>>> That's the rub isn't it? I just want someone to pick it up and take it
>>>> home. No payment at all.
>>>>
>>>>
>>>>
>>>> On Fri, Jul 19, 2019, 6:16 PM  wrote:
>>>>
>>>> If you get some one to remove the motor and mounting bracket off that
>>>> woodchuck and ship it to you
>>>>
>>>> I will buy it from you for the $72 you want for the whole mill
>>>>
>>>>
>>>>
>>>> Bill
>>>>
>>>>
>>>>
>>>> *From:* legacy-ornamental-mills@googlegroups.com <
>>>> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Rick Waters
>>>> *Sent:* Saturday, 20 July 2019 5:01 AM
>>>> *To:* legacy-ornamental-mills@googlegroups.com
>>>> *Subject:* Round 2: Woodchuck for sale
>>>>
>>>>
>>>>
>>>> OK, so I won that auction, where the "flutter" (LOL) or more
>>>> appropriately, the Woodchuck, was for sale on IRS Auctions.  I got it for a
>>>> steal, $50.  $72 total, with tax and stuff.  But, I'm not sure why I
>>>> thought it was located in Indian, but I did.  It's actually in York, PA.
>>>>
>>>>
>>>>
>>>> It's going to cost way too much for me to go to York, pick it up and
>>>> transport it back.  Also, it's not worth it to pay someone to package it up
>>>> and ship it.
>>>>
>>>>
>>>>
>>>> So...  It may be your lucky day!  If you are near enough to York, PA,
>>>> to pick it up.  You can have this 'parts' machine for the low, low price of
>>&

Re: Round 3: Woodchuck for FREE

[Rick Waters]

It sure would.  You just need someone willing to go to the warehouse and
load it into the shipping container.  That's my problem.  If I was willing
to go there, I'd just pick it up and bring it home.  Then I'd part it out
to the people on this list.

On Wed, Aug 28, 2019 at 10:54 AM Richard Ellis 
wrote:

> I have a friend who often ships cars from the U.S.A. The Woodchuck would
> fit in one of those.
> Richard
>
> On Wednesday, August 28, 2019 at 4:10:42 PM UTC+1, Brafield Bodger wrote:
>>
>> I'd love it - but carriage may be a problem :)
>>
>>
>>
>> -- Original Message --
>> From: "Rick Waters" 
>> To: legacy-orna...@googlegroups.com
>> Sent: 28/08/2019 15:49:47
>> Subject: Round 3: Woodchuck for FREE
>>
>> Ok, I was able to get anyone to say yes to this a month ago.  Let's see
>> now.
>>
>> This Woodchuck is paid for already.  All you have to do is go pick it
>> up.  I'm no longer interested in it, so if you want it, it's yours.
>>
>> It is located in York, PA.
>>
>> On Fri, Jul 19, 2019, 7:27 PM Tim Ziegler  wrote:
>>
>>> Yup but for us Minnesotans that's a 4 day drive. Lol
>>>
>>> On Fri, Jul 19, 2019, 6:48 PM  wrote:
>>>
>>>> 775 miles that a short trip down the road here in aus 
>>>>
>>>>
>>>>
>>>> Bill
>>>>
>>>>
>>>>
>>>> *From:* legacy-orna...@googlegroups.com <
>>>> legacy-orna...@googlegroups.com> *On Behalf Of *rtju...@gmail.com
>>>> *Sent:* Saturday, 20 July 2019 9:39 AM
>>>> *To:* legacy-orna...@googlegroups.com
>>>> *Subject:* RE: Round 2: Woodchuck for sale
>>>>
>>>>
>>>>
>>>> My wife and I are sitting here eating dinner and I laughed and said we
>>>> shour make a run to York PA.
>>>>
>>>> Only 775 miles from here. Lol
>>>>
>>>>
>>>>
>>>> Sent from Yahoo Mail on Android
>>>> <https://go.onelink.me/107872968?pid=InProduct=Global_Internal_YGrowth_AndroidEmailSig__AndroidUsers_wl=ym_sub1=Internal_sub2=Global_YGrowth_sub3=EmailSignature>
>>>>
>>>>
>>>>
>>>> On Fri, Jul 19, 2019 at 6:35 PM, bulk...@mmnet.com.au
>>>>
>>>>  wrote:
>>>>
>>>> I understand but if no one can get it and you want to make a few bucks
>>>> back my offer stands I still need a couple of legacy motors.
>>>>
>>>>
>>>>
>>>> Bill
>>>>
>>>>
>>>>
>>>> *From:* legacy-orna...@googlegroups.com <
>>>> legacy-orna...@googlegroups.com> *On Behalf Of *Rick Waters
>>>> *Sent:* Saturday, 20 July 2019 9:21 AM
>>>> *To:* legacy-orna...@googlegroups.com
>>>> *Subject:* Re: Round 2: Woodchuck for sale
>>>>
>>>>
>>>>
>>>> That's the rub isn't it? I just want someone to pick it up and take it
>>>> home. No payment at all.
>>>>
>>>>
>>>>
>>>> On Fri, Jul 19, 2019, 6:16 PM  wrote:
>>>>
>>>> If you get some one to remove the motor and mounting bracket off that
>>>> woodchuck and ship it to you
>>>>
>>>> I will buy it from you for the $72 you want for the whole mill
>>>>
>>>>
>>>>
>>>> Bill
>>>>
>>>>
>>>>
>>>> *From:* legacy-orna...@googlegroups.com <
>>>> legacy-orna...@googlegroups.com> *On Behalf Of *Rick Waters
>>>> *Sent:* Saturday, 20 July 2019 5:01 AM
>>>> *To:* legacy-orna...@googlegroups.com
>>>> *Subject:* Round 2: Woodchuck for sale
>>>>
>>>>
>>>>
>>>> OK, so I won that auction, where the "flutter" (LOL) or more
>>>> appropriately, the Woodchuck, was for sale on IRS Auctions.  I got it for a
>>>> steal, $50.  $72 total, with tax and stuff.  But, I'm not sure why I
>>>> thought it was located in Indian, but I did.  It's actually in York, PA.
>>>>
>>>>
>>>>
>>>> It's going to cost way too much for me to go to York, pick it up and
>>>> transport it back.  Also, it's not worth it to pay someone to package it up
>>>> and ship it.
>>>>
>>>>
>>>>
>>>> So...  It may be your lucky day!  If you are near enough to York, PA,
>>>> to pick it up.  You can 

Round 3: Woodchuck for FREE

[Rick Waters]

Ok, I was able to get anyone to say yes to this a month ago.  Let's see
now.

This Woodchuck is paid for already.  All you have to do is go pick it up.
I'm no longer interested in it, so if you want it, it's yours.

It is located in York, PA.

On Fri, Jul 19, 2019, 7:27 PM Tim Ziegler  wrote:

> Yup but for us Minnesotans that's a 4 day drive. Lol
>
> On Fri, Jul 19, 2019, 6:48 PM  wrote:
>
>> 775 miles that a short trip down the road here in aus 
>>
>>
>>
>> Bill
>>
>>
>>
>> *From:* legacy-ornamental-mills@googlegroups.com <
>> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *
>> rtjurg...@gmail.com
>> *Sent:* Saturday, 20 July 2019 9:39 AM
>> *To:* legacy-ornamental-mills@googlegroups.com
>> *Subject:* RE: Round 2: Woodchuck for sale
>>
>>
>>
>> My wife and I are sitting here eating dinner and I laughed and said we
>> shour make a run to York PA.
>>
>> Only 775 miles from here. Lol
>>
>>
>>
>> Sent from Yahoo Mail on Android
>> <https://go.onelink.me/107872968?pid=InProduct=Global_Internal_YGrowth_AndroidEmailSig__AndroidUsers_wl=ym_sub1=Internal_sub2=Global_YGrowth_sub3=EmailSignature>
>>
>>
>>
>> On Fri, Jul 19, 2019 at 6:35 PM, bulke...@mmnet.com.au
>>
>>  wrote:
>>
>> I understand but if no one can get it and you want to make a few bucks
>> back my offer stands I still need a couple of legacy motors.
>>
>>
>>
>> Bill
>>
>>
>>
>> *From:* legacy-ornamental-mills@googlegroups.com <
>> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Rick Waters
>> *Sent:* Saturday, 20 July 2019 9:21 AM
>> *To:* legacy-ornamental-mills@googlegroups.com
>> *Subject:* Re: Round 2: Woodchuck for sale
>>
>>
>>
>> That's the rub isn't it? I just want someone to pick it up and take it
>> home. No payment at all.
>>
>>
>>
>> On Fri, Jul 19, 2019, 6:16 PM  wrote:
>>
>> If you get some one to remove the motor and mounting bracket off that
>> woodchuck and ship it to you
>>
>> I will buy it from you for the $72 you want for the whole mill
>>
>>
>>
>> Bill
>>
>>
>>
>> *From:* legacy-ornamental-mills@googlegroups.com <
>> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Rick Waters
>> *Sent:* Saturday, 20 July 2019 5:01 AM
>> *To:* legacy-ornamental-mills@googlegroups.com
>> *Subject:* Round 2: Woodchuck for sale
>>
>>
>>
>> OK, so I won that auction, where the "flutter" (LOL) or more
>> appropriately, the Woodchuck, was for sale on IRS Auctions.  I got it for a
>> steal, $50.  $72 total, with tax and stuff.  But, I'm not sure why I
>> thought it was located in Indian, but I did.  It's actually in York, PA.
>>
>>
>>
>> It's going to cost way too much for me to go to York, pick it up and
>> transport it back.  Also, it's not worth it to pay someone to package it up
>> and ship it.
>>
>>
>>
>> So...  It may be your lucky day!  If you are near enough to York, PA, to
>> pick it up.  You can have this 'parts' machine for the low, low price of 1
>> Thank You.  I know it's a high price for some, but that's the price.  Firm
>> :)
>>
>>
>>
>> I might be able to send pic, if I can still access the auction.  But,
>> it's an old woodchuck with a crank handle.  Plus an external motor attached
>> to the large gear.  Original stand included.
>>
>>
>>
>> Rick W.
>>
>> --
>> You received this message because you are subscribed to the Google Groups
>> "Legacy Ornamental Mills" group.
>> To unsubscribe from this group and stop receiving emails from it, send an
>> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
>> To view this discussion on the web visit
>> https://groups.google.com/d/msgid/legacy-ornamental-mills/CAM0xKs9eqBMp7C3nXCsk6XZWCC0Y7nyqHgiSqDb3dP-Ux31XGg%40mail.gmail.com
>> <https://groups.google.com/d/msgid/legacy-ornamental-mills/CAM0xKs9eqBMp7C3nXCsk6XZWCC0Y7nyqHgiSqDb3dP-Ux31XGg%40mail.gmail.com?utm_medium=email_source=footer>
>> .
>>
>>
>>
>> [image:
>> https://ipmcdn.avast.com/images/icons/icon-envelope-tick-round-orange-animated-no-repeat-v1.gif]
>> <https://www.avast.com/sig-email?utm_medium=email_source=link_campaign=sig-email_content=emailclient>
>>
>> Virus-free. www.avast.com
>> <https://www.avast.com/sig-email?utm_medium=email_source=link_campaign=sig-email_content=emailclient>
>>
>

Re: Round 2: Woodchuck for sale

[Rick Waters]

That's the rub isn't it? I just want someone to pick it up and take it
home. No payment at all.

On Fri, Jul 19, 2019, 6:16 PM  wrote:

> If you get some one to remove the motor and mounting bracket off that
> woodchuck and ship it to you
>
> I will buy it from you for the $72 you want for the whole mill
>
>
>
> Bill
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Rick Waters
> *Sent:* Saturday, 20 July 2019 5:01 AM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* Round 2: Woodchuck for sale
>
>
>
> OK, so I won that auction, where the "flutter" (LOL) or more
> appropriately, the Woodchuck, was for sale on IRS Auctions.  I got it for a
> steal, $50.  $72 total, with tax and stuff.  But, I'm not sure why I
> thought it was located in Indian, but I did.  It's actually in York, PA.
>
>
>
> It's going to cost way too much for me to go to York, pick it up and
> transport it back.  Also, it's not worth it to pay someone to package it up
> and ship it.
>
>
>
> So...  It may be your lucky day!  If you are near enough to York, PA, to
> pick it up.  You can have this 'parts' machine for the low, low price of 1
> Thank You.  I know it's a high price for some, but that's the price.  Firm
> :)
>
>
>
> I might be able to send pic, if I can still access the auction.  But, it's
> an old woodchuck with a crank handle.  Plus an external motor attached to
> the large gear.  Original stand included.
>
>
>
> Rick W.
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/CAM0xKs9eqBMp7C3nXCsk6XZWCC0Y7nyqHgiSqDb3dP-Ux31XGg%40mail.gmail.com
> <https://groups.google.com/d/msgid/legacy-ornamental-mills/CAM0xKs9eqBMp7C3nXCsk6XZWCC0Y7nyqHgiSqDb3dP-Ux31XGg%40mail.gmail.com?utm_medium=email_source=footer>
> .
>
>
> <https://www.avast.com/sig-email?utm_medium=email_source=link_campaign=sig-email_content=emailclient>
>  Virus-free.
> www.avast.com
> <https://www.avast.com/sig-email?utm_medium=email_source=link_campaign=sig-email_content=emailclient>
> <#m_89772738284290151_DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/01d53e88%240a0e95a0%241e2bc0e0%24%40mmnet.com.au
> <https://groups.google.com/d/msgid/legacy-ornamental-mills/01d53e88%240a0e95a0%241e2bc0e0%24%40mmnet.com.au?utm_medium=email_source=footer>
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAM0xKs-GEtw44TmtnDGpCWBm%3DrAUqYnsj_vmrKM5UrTmEgJFGg%40mail.gmail.com.

Re: Holy Smokes!

[Rick Waters]

Wow!  That's perfect! Thanks!!!

On Sun, Feb 10, 2019 at 8:50 PM Tim Ziegler  wrote:

> Ok Rick,
>
> This may not be exactly the manual but has tons of the info you need and
> want. this what legacy sent me when I landed my big catch AKA the WoodChuck
> Triple click or highlight the link right click once pick go too... and
> there you go. hope it helps.
>
> https://www.dropbox.com/sh/4b0q959tgjmxi3j/AACPIMsz8WIiiveLBBoZXOzCa?dl=0=Woodchuck+IRT+manual.pdf
>
> Let me know if you can open it.
> Kind Regards,
>
> Timothy J. Ziegler
> Ziegler WoodWork & Specialty
> 14171 160th Ave.
> Foreston MN 56330
>
> 320-294-5798 shop
> 320-630-2243 cell
>
>
> On Sun, Feb 10, 2019 at 12:02 PM Rick Waters 
> wrote:
>
>> OK, I'll admit, I've had the Woodchuck for about 6 weeks (maybe 2
>> months), and I haven't really touched it since I got it.  Mostly because I
>> had an unheated garage as a workshop, and Chicago temps have been
>> prohibitively cold lately.
>>
>> I took 20 minutes this morning to take the crank handle Mike Pung sent me
>> (thanks Mike!) out and figure out how it goes on the machine.  I had to
>> take off some giant washers, but figured it out.
>>
>> Then I started taking a bunch of parts off that were rust frozen, oiled
>> them up and got some of the surface rust off so they could move freely (to
>> some extent).
>>
>> Then I saw it...  This machine is AWESOME!  I'm still not sure about a
>> lot of things, but the possibilities are endless!  I just wanted something
>> to make pool cues with, but this can do so much more!
>>
>> Yeah, I've seen the braiding and twist videos, flute routing and all
>> that.  But when you see how configurable this is up close, your mind runs
>> wild!
>>
>> If anyone has a Woodchuck manual, or even an extra one, I'd be interested
>> it copying it.  The company I own is a professional training company, and I
>> make training manuals all the time.  I can make PDFs out of anything.  So
>> if you want, I can make professional manuals that are out of print...  Just
>> an offer.
>>
>> Thanks again to Mike Pung!
>>
>> Rick
>>
>> --
>> You received this message because you are subscribed to the Google Groups
>> "Legacy Ornamental Mills" group.
>> To unsubscribe from this group and stop receiving emails from it, send an
>> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
>> To post to this group, send email to
>> legacy-ornamental-mills@googlegroups.com.
>> Visit this group at
>> https://groups.google.com/group/legacy-ornamental-mills.
>> For more options, visit https://groups.google.com/d/optout.
>>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To post to this group, send email to
> legacy-ornamental-mills@googlegroups.com.
> Visit this group at
> https://groups.google.com/group/legacy-ornamental-mills.
> For more options, visit https://groups.google.com/d/optout.
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

Holy Smokes!

[Rick Waters]

OK, I'll admit, I've had the Woodchuck for about 6 weeks (maybe 2 months),
and I haven't really touched it since I got it.  Mostly because I had an
unheated garage as a workshop, and Chicago temps have been prohibitively
cold lately.

I took 20 minutes this morning to take the crank handle Mike Pung sent me
(thanks Mike!) out and figure out how it goes on the machine.  I had to
take off some giant washers, but figured it out.

Then I started taking a bunch of parts off that were rust frozen, oiled
them up and got some of the surface rust off so they could move freely (to
some extent).

Then I saw it...  This machine is AWESOME!  I'm still not sure about a lot
of things, but the possibilities are endless!  I just wanted something to
make pool cues with, but this can do so much more!

Yeah, I've seen the braiding and twist videos, flute routing and all that.
But when you see how configurable this is up close, your mind runs wild!

If anyone has a Woodchuck manual, or even an extra one, I'd be interested
it copying it.  The company I own is a professional training company, and I
make training manuals all the time.  I can make PDFs out of anything.  So
if you want, I can make professional manuals that are out of print...  Just
an offer.

Thanks again to Mike Pung!

Rick

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

Split nut on the way!

[Rick Waters]

Legacy called me this morning (I left a message a couple days ago).  I
talked with Cindy, and got a split nut and backer ordered!  Cindy is
awesome!

Thanks for the helped everyone!

Rick

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

Re: L1200

[Rick Waters]

Brad,
I wish I could afford it (and that my wife would let me bring it home).

Hey, I hear you.  I live in fierce determination that I will have no
regrets.  I had stage 3 colon cancer last year.  While going through chemo,
we found out my wife had stage 1 bladder cancer.  While we were both going
through our own ordeals, my 7 year old daughter had a huge scare with
appendicitis.  2018 was a real bitch for us.  While my wife and I know that
our cancers can come back and take us at any time, we are determined to
enjoy the heck out of life, and our kids.

That's kind of why I bought my Woodchuck.  I told my older sons I'd find a
way to make them the custom pool cues they'd been asking for.  And, as soon
as I get the feeling back in my fingers (chemotherapy can cause
nueropathy), I'm going to start turning again.  And learning how to use the
Woodchuck.

There are better days ahead, sir.

Rick

On Fri, Jan 25, 2019 at 8:09 AM Brad Hutton  wrote:

> Gents I have a L1200 basically new. I bought it in 2008. Used only one
> time. Has just sat in shop. Long story I am not going to waste your time
> with that. I have cancer and sold my shop. I have the mill with about all
> the accessories they sold. All gears, table, bits, 7518 router, design kit,
> nova chuck, you name I got it. Most still in original packaging.  I add the
> motor drives. I paid about 6k for all of it. I have many new bits. I know I
> will not get what I paid for it but was wondering what I should ask. Can
> you help me. I can send more photos and a copy of packing list.
>
> I also have a 4x4 CNC.
>
> Thanks for help contact me if interested
>
> hutton...@gmail.com
>
> Sent from my iPhone
> Brad
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To post to this group, send email to
> legacy-ornamental-mills@googlegroups.com.
> Visit this group at
> https://groups.google.com/group/legacy-ornamental-mills.
> For more options, visit https://groups.google.com/d/optout.
>
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To post to this group, send email to
> legacy-ornamental-mills@googlegroups.com.
> Visit this group at
> https://groups.google.com/group/legacy-ornamental-mills.
> For more options, visit https://groups.google.com/d/optout.
>
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To post to this group, send email to
> legacy-ornamental-mills@googlegroups.com.
> Visit this group at
> https://groups.google.com/group/legacy-ornamental-mills.
> For more options, visit https://groups.google.com/d/optout.
>
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To post to this group, send email to
> legacy-ornamental-mills@googlegroups.com.
> Visit this group at
> https://groups.google.com/group/legacy-ornamental-mills.
> For more options, visit https://groups.google.com/d/optout.
>
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To post to this group, send email to
> legacy-ornamental-mills@googlegroups.com.
> Visit this group at
> https://groups.google.com/group/legacy-ornamental-mills.
> For more options, visit https://groups.google.com/d/optout.
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

Re: Live vs Dead Center

[Rick Waters]

A live center's head rides on a set of internal ball bearings, so it
rotates with the work, reducing friction.
A dead center has a fixed head, so it doesn't move with the work.  It can
cause a lot of friction, and under high pressure can cause high pitched
squealing.
I've been turning for about 5 years, but still don't know when to use a
dead center, so I always use a live center.  But, I only turn pens, so my
knowledge is limited.  I just got the Woodchuck so I could turn pool cues.

On Sun, Jan 20, 2019 at 8:44 AM  wrote:

> OK. I've seen a lot of recommendations for using a "live" center instead
> of the "dead" center shipped with the LOM.  What is the difference?  Where
> can I get a live center?
>
> Before I got the LOM, the only woodworking I knew and did was straight
> cuts and flat boards.  A whole new world has been opened for me.
>
> Thanks
>
> Jim Riggen
>
> P.S. mine is a model 900 LOM
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To post to this group, send email to
> legacy-ornamental-mills@googlegroups.com.
> Visit this group at
> https://groups.google.com/group/legacy-ornamental-mills.
> For more options, visit https://groups.google.com/d/optout.
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

Re: ID My Mill?

[Rick Waters]

Hmm, I suspected as much. Are the gears interchangeable? Can i still get
them from legacy?

On Sat, Jan 19, 2019, 8:07 AM Bill Bulkeley  Bill
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com [mailto:
> legacy-ornamental-mills@googlegroups.com] *On Behalf Of *Bill Bulkeley
> *Sent:* Sunday, 20 January 2019 12:59 AM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* RE: ID My Mill?
>
>
>
> If everything you have is in the pics then you have a lot of gears missing
> you can see them all in the pic i sent
>
>
>
> Bill
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com [mailto:
> legacy-ornamental-mills@googlegroups.com] *On Behalf Of *Rick Waters
> *Sent:* Saturday, 19 January 2019 11:54 PM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* Re: ID My Mill?
>
>
>
> Everything I have is in the pics.
>
>
>
> On Sat, Jan 19, 2019, 5:44 AM Tim Ziegler 
> Great it looks like your set there. Nice.
>
>
> Kind Regards,
>
>
>
> Timothy J. Ziegler
>
> Ziegler WoodWork & Specialty
>
> 14171 160th Ave.
>
> Foreston MN 56330
>
>
>
> 320-294-5798 shop
>
> 320-630-2243 cell
>
>
>
>
>
> On Fri, Jan 18, 2019 at 10:38 PM Rick Waters 
> wrote:
>
> Thanks Mike!  I'll call tomorrow, after we get the pinewood derby car
> completed :)
>
>
>
> Tim, Here are pics of the head and tail stock.
>
>
>
> On Fri, Jan 18, 2019 at 10:33 PM Okla Mike (Liltwisted) <
> legacym...@iglide.net> wrote:
>
> Welcome to the group Rick.  And welcome to the WoodChuck family
>
> I have a crank handles for you, One for the drive as well as one for the
> shaft.  Give me a call and I will see what else you may need and if I have
> it.
>
> Mike OK   405-650-0542
>
> On 1/18/2019 9:28 PM, Rick Waters wrote:
>
> Thanks Bill!
>
> That helps a lot.
>
> From the pictures it looks like the split nut is connected by a steel or
> aluminum arm, but is a plastic or urethane 'cup'?
>
>
>
> Thanks Tim!  Yeah, that would be great if you could contact Mike!  I'll
> call Legacy on Tuesday.
>
> I have not looked anything up on Youtube, but I will now.
>
>
>
> On Fri, Jan 18, 2019 at 9:25 PM Tim Ziegler  wrote:
>
> Rick, I am not totally sure they will carry the crank. I know for sure
> they carry the split nut lock.
>
> I will text Mike Pung and ask or have him respond to you too.  He is the
> Wood Chuck Master.
>
> No Legacy is up and running strong but deep into CNC equipment.  They
> carry minimal parts for
>
> the WoodChuck and the Legacy Ornamental Mills or LOM's as most will refer
> too.
>
> Have you looked up any you tubes on the Wood Chuck yet?
>
>
> Kind Regards,
>
>
>
> Timothy J. Ziegler
>
> Ziegler WoodWork & Specialty
>
> 14171 160th Ave.
>
> Foreston MN 56330
>
>
>
> 320-294-5798 shop
>
> 320-630-2243 cell
>
>
>
>
>
> On Fri, Jan 18, 2019 at 8:30 PM Rick Waters  wrote:
>
> Thanks Tim!
>
> No I don't have that crank.
>
> How can I order it from Legacy? I thought they closed?
>
>
>
> On Fri, Jan 18, 2019, 7:44 PM Tim Ziegler 
> Yes you are missing a lexan plate that the router mounts too then attaches
> to the side brackets located on the crank.
>
> And your missing the black plastic split nut that drives the router with
> the crank or motor.
>
> Do you have the crank that runs the drive screw if the motor is not
> engaged?
>
>
>
> If Mike Pung see's this post he may have some direction to take. Legacy
> may or may not have the split nut.
>
> The lexan plate you may have to make.
>
>
>
> Hope this helps.
>
> Kind Regards,
>
>
>
> Timothy J. Ziegler
>
> Ziegler WoodWork & Specialty
>
> 14171 160th Ave.
>
> Foreston MN 56330
>
>
>
> 320-294-5798 shop
>
> 320-630-2243 cell
>
>
>
>
>
> On Fri, Jan 18, 2019 at 6:32 PM Rick Waters  wrote:
>
> I finally took some pictures of my mill.  I got it about a month ago, but
> I think it's missing at least one crucial part.  I feel like the router
> sled should connect to the ball screw, and have something that locks the
> router to the router sled.  Can anyone tell me what model I have, and what
> parts I need?  Thanks!
>
> Rick
>
>
>
> [image: 20190118_182403.jpg]
>
> [image: 20190118_182413.jpg]
>
> [image: 20190118_182418.jpg]
>
>
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> emai

Re: ID My Mill?

[Rick Waters]

Everything I have is in the pics.

On Sat, Jan 19, 2019, 5:44 AM Tim Ziegler  Great it looks like your set there. Nice.
>
> Kind Regards,
>
> Timothy J. Ziegler
> Ziegler WoodWork & Specialty
> 14171 160th Ave.
> Foreston MN 56330
>
> 320-294-5798 shop
> 320-630-2243 cell
>
>
> On Fri, Jan 18, 2019 at 10:38 PM Rick Waters 
> wrote:
>
>> Thanks Mike!  I'll call tomorrow, after we get the pinewood derby car
>> completed :)
>>
>> Tim, Here are pics of the head and tail stock.
>>
>> On Fri, Jan 18, 2019 at 10:33 PM Okla Mike (Liltwisted) <
>> legacym...@iglide.net> wrote:
>>
>>> Welcome to the group Rick.  And welcome to the WoodChuck family
>>>
>>> I have a crank handles for you, One for the drive as well as one for the
>>> shaft.  Give me a call and I will see what else you may need and if I have
>>> it.
>>>
>>> Mike OK   405-650-0542
>>> On 1/18/2019 9:28 PM, Rick Waters wrote:
>>>
>>> Thanks Bill!
>>> That helps a lot.
>>> From the pictures it looks like the split nut is connected by a steel or
>>> aluminum arm, but is a plastic or urethane 'cup'?
>>>
>>> Thanks Tim!  Yeah, that would be great if you could contact Mike!  I'll
>>> call Legacy on Tuesday.
>>> I have not looked anything up on Youtube, but I will now.
>>>
>>> On Fri, Jan 18, 2019 at 9:25 PM Tim Ziegler 
>>> wrote:
>>>
>>>> Rick, I am not totally sure they will carry the crank. I know for sure
>>>> they carry the split nut lock.
>>>> I will text Mike Pung and ask or have him respond to you too.  He is
>>>> the Wood Chuck Master.
>>>> No Legacy is up and running strong but deep into CNC equipment.  They
>>>> carry minimal parts for
>>>> the WoodChuck and the Legacy Ornamental Mills or LOM's as most will
>>>> refer too.
>>>> Have you looked up any you tubes on the Wood Chuck yet?
>>>>
>>>> Kind Regards,
>>>>
>>>> Timothy J. Ziegler
>>>> Ziegler WoodWork & Specialty
>>>> 14171 160th Ave.
>>>> Foreston MN 56330
>>>>
>>>> 320-294-5798 shop
>>>> 320-630-2243 cell
>>>>
>>>>
>>>> On Fri, Jan 18, 2019 at 8:30 PM Rick Waters 
>>>> wrote:
>>>>
>>>>> Thanks Tim!
>>>>> No I don't have that crank.
>>>>> How can I order it from Legacy? I thought they closed?
>>>>>
>>>>> On Fri, Jan 18, 2019, 7:44 PM Tim Ziegler >>>> wrote:
>>>>>
>>>>>> Yes you are missing a lexan plate that the router mounts too then
>>>>>> attaches to the side brackets located on the crank.
>>>>>> And your missing the black plastic split nut that drives the router
>>>>>> with the crank or motor.
>>>>>> Do you have the crank that runs the drive screw if the motor is not
>>>>>> engaged?
>>>>>>
>>>>>> If Mike Pung see's this post he may have some direction to take.
>>>>>> Legacy may or may not have the split nut.
>>>>>> The lexan plate you may have to make.
>>>>>>
>>>>>> Hope this helps.
>>>>>> Kind Regards,
>>>>>>
>>>>>> Timothy J. Ziegler
>>>>>> Ziegler WoodWork & Specialty
>>>>>> 14171 160th Ave.
>>>>>> Foreston MN 56330
>>>>>>
>>>>>> 320-294-5798 shop
>>>>>> 320-630-2243 cell
>>>>>>
>>>>>>
>>>>>> On Fri, Jan 18, 2019 at 6:32 PM Rick Waters 
>>>>>> wrote:
>>>>>>
>>>>>>> I finally took some pictures of my mill.  I got it about a month
>>>>>>> ago, but I think it's missing at least one crucial part.  I feel like 
>>>>>>> the
>>>>>>> router sled should connect to the ball screw, and have something that 
>>>>>>> locks
>>>>>>> the router to the router sled.  Can anyone tell me what model I have, 
>>>>>>> and
>>>>>>> what parts I need?  Thanks!
>>>>>>> Rick
>>>>>>>
>>>>>>> [image: 20190118_182403.jpg]
>>>>>>>
>>>>>>> [image: 20190118_182413.jpg]
>>>>>>>
>>>>

Re: ID My Mill?

[Rick Waters]

Thanks Bill!
That helps a lot.
>From the pictures it looks like the split nut is connected by a steel or
aluminum arm, but is a plastic or urethane 'cup'?

Thanks Tim!  Yeah, that would be great if you could contact Mike!  I'll
call Legacy on Tuesday.
I have not looked anything up on Youtube, but I will now.

On Fri, Jan 18, 2019 at 9:25 PM Tim Ziegler  wrote:

> Rick, I am not totally sure they will carry the crank. I know for sure
> they carry the split nut lock.
> I will text Mike Pung and ask or have him respond to you too.  He is the
> Wood Chuck Master.
> No Legacy is up and running strong but deep into CNC equipment.  They
> carry minimal parts for
> the WoodChuck and the Legacy Ornamental Mills or LOM's as most will refer
> too.
> Have you looked up any you tubes on the Wood Chuck yet?
>
> Kind Regards,
>
> Timothy J. Ziegler
> Ziegler WoodWork & Specialty
> 14171 160th Ave.
> Foreston MN 56330
>
> 320-294-5798 shop
> 320-630-2243 cell
>
>
> On Fri, Jan 18, 2019 at 8:30 PM Rick Waters  wrote:
>
>> Thanks Tim!
>> No I don't have that crank.
>> How can I order it from Legacy? I thought they closed?
>>
>> On Fri, Jan 18, 2019, 7:44 PM Tim Ziegler >
>>> Yes you are missing a lexan plate that the router mounts too then
>>> attaches to the side brackets located on the crank.
>>> And your missing the black plastic split nut that drives the router with
>>> the crank or motor.
>>> Do you have the crank that runs the drive screw if the motor is not
>>> engaged?
>>>
>>> If Mike Pung see's this post he may have some direction to take. Legacy
>>> may or may not have the split nut.
>>> The lexan plate you may have to make.
>>>
>>> Hope this helps.
>>> Kind Regards,
>>>
>>> Timothy J. Ziegler
>>> Ziegler WoodWork & Specialty
>>> 14171 160th Ave.
>>> Foreston MN 56330
>>>
>>> 320-294-5798 shop
>>> 320-630-2243 cell
>>>
>>>
>>> On Fri, Jan 18, 2019 at 6:32 PM Rick Waters 
>>> wrote:
>>>
>>>> I finally took some pictures of my mill.  I got it about a month ago,
>>>> but I think it's missing at least one crucial part.  I feel like the router
>>>> sled should connect to the ball screw, and have something that locks the
>>>> router to the router sled.  Can anyone tell me what model I have, and what
>>>> parts I need?  Thanks!
>>>> Rick
>>>>
>>>> [image: 20190118_182403.jpg]
>>>>
>>>> [image: 20190118_182413.jpg]
>>>>
>>>> [image: 20190118_182418.jpg]
>>>>
>>>> --
>>>> You received this message because you are subscribed to the Google
>>>> Groups "Legacy Ornamental Mills" group.
>>>> To unsubscribe from this group and stop receiving emails from it, send
>>>> an email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
>>>> To post to this group, send email to
>>>> legacy-ornamental-mills@googlegroups.com.
>>>> Visit this group at
>>>> https://groups.google.com/group/legacy-ornamental-mills.
>>>> For more options, visit https://groups.google.com/d/optout.
>>>>
>>> --
>>> You received this message because you are subscribed to the Google
>>> Groups "Legacy Ornamental Mills" group.
>>> To unsubscribe from this group and stop receiving emails from it, send
>>> an email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
>>> To post to this group, send email to
>>> legacy-ornamental-mills@googlegroups.com.
>>> Visit this group at
>>> https://groups.google.com/group/legacy-ornamental-mills.
>>> For more options, visit https://groups.google.com/d/optout.
>>>
>> --
>> You received this message because you are subscribed to the Google Groups
>> "Legacy Ornamental Mills" group.
>> To unsubscribe from this group and stop receiving emails from it, send an
>> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
>> To post to this group, send email to
>> legacy-ornamental-mills@googlegroups.com.
>> Visit this group at
>> https://groups.google.com/group/legacy-ornamental-mills.
>> For more options, visit https://groups.google.com/d/optout.
>>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To post to this group, send email to
> legacy-ornamental-mills@googlegroups.com.
> Visit this group at
> https://groups.google.com/group/legacy-ornamental-mills.
> For more options, visit https://groups.google.com/d/optout.
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

Re: LOM near Wisconsin and Illonois border

[Rick Waters]

I'm in Chicago, but the wife would kill me if I came home with another.  Is
way better than mine though.

On Fri, Jan 11, 2019 at 9:49 AM Harvey  wrote:

>
> https://milwaukee.craigslist.org/tls/d/kenosha-ornamental-mill/6791697218.html
>
>
> If anyone is interested.
>
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To post to this group, send email to
> legacy-ornamental-mills@googlegroups.com.
> Visit this group at
> https://groups.google.com/group/legacy-ornamental-mills.
> For more options, visit https://groups.google.com/d/optout.
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

Re: not a LOM question

[Rick Waters]

Yeah, that would do it!

On Mon, Jan 7, 2019 at 9:33 AM Bill Bulkeley  wrote:

> How about this cutter
> https://www.classichandtools.com/acatalog/Veritas-Tapered-Reamer-Pro-05J6101.html
>
>
>
> Bill
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com [mailto:
> legacy-ornamental-mills@googlegroups.com] *On Behalf Of *Tracy Smith
> *Sent:* Tuesday, 8 January 2019 2:29 AM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* Re: not a LOM question
>
>
>
> It could also have been done with a CNC.
>
>
>
> On Mon, Jan 7, 2019 at 8:19 AM Rick Waters  wrote:
>
> Plug cutters drill conic holes.  A plug cutter would leave a jagged
> bottom.  The bits that Bill and Okla Mike showed have pointed tips, so
> would leave a conic bottom.  Your candle holder mortises have flat
> bottoms.  Maybe a conic shaped router/shaper bit could do this?
>
>
>
> On Mon, Jan 7, 2019 at 9:11 AM Bill Bulkeley 
> wrote:
>
> With something similar to this i suspect [image: Image result for tapered
> drill]
>
>
>
> Bill
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com [mailto:
> legacy-ornamental-mills@googlegroups.com] *On Behalf Of *MAX LATHAM
> *Sent:* Tuesday, 8 January 2019 1:54 AM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* not a LOM question
>
>
>
> Happy New Year all you wood shredders!
>
>
>
> I have a question not LOM related. While shopping, my better half found a
> candle holder that would hold numerous candles(3). The holes are conical
> shaped and the sides are slanted to the base, paralleling the holes.
>
> Does any body know how those tapered holes were bored. She's after me to
> make a few for gifts!
>
> Thanks,
>
> max
>
>
>
>
> <http://www.avg.com/email-signature?utm_medium=email_source=link_campaign=sig-email_content=emailclient>
>
> Virus-free. www.avg.com
> <http://www.avg.com/email-signature?utm_medium=email_source=link_campaign=sig-email_content=emailclient>
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To post to this group, send email to
> legacy-ornamental-mills@googlegroups.com.
> Visit this group at
> https://groups.google.com/group/legacy-ornamental-mills.
> For more options, visit https://groups.google.com/d/optout.
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To post to this group, send email to
> legacy-ornamental-mills@googlegroups.com.
> Visit this group at
> https://groups.google.com/group/legacy-ornamental-mills.
> For more options, visit https://groups.google.com/d/optout.
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To post to this group, send email to
> legacy-ornamental-mills@googlegroups.com.
> Visit this group at
> https://groups.google.com/group/legacy-ornamental-mills.
> For more options, visit https://groups.google.com/d/optout.
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To post to this group, send email to
> legacy-ornamental-mills@googlegroups.com.
> Visit this group at
> https://groups.google.com/group/legacy-ornamental-mills.
> For more options, visit https://groups.google.com/d/optout.
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To post to this group, send email to
> legacy-ornamental-mills@googlegroups.com.
> Visit this group at
> https://groups.google.com/group/legacy-ornamental-mills.
> For more options, visit https://groups.google.com/d/optout.
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

Re: not a LOM question

[Rick Waters]

Plug cutters drill conic holes.  A plug cutter would leave a jagged
bottom.  The bits that Bill and Okla Mike showed have pointed tips, so
would leave a conic bottom.  Your candle holder mortises have flat
bottoms.  Maybe a conic shaped router/shaper bit could do this?

On Mon, Jan 7, 2019 at 9:11 AM Bill Bulkeley  wrote:

> With something similar to this i suspect [image: Image result for tapered
> drill]
>
>
>
> Bill
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com [mailto:
> legacy-ornamental-mills@googlegroups.com] *On Behalf Of *MAX LATHAM
> *Sent:* Tuesday, 8 January 2019 1:54 AM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* not a LOM question
>
>
>
> Happy New Year all you wood shredders!
>
>
>
> I have a question not LOM related. While shopping, my better half found a
> candle holder that would hold numerous candles(3). The holes are conical
> shaped and the sides are slanted to the base, paralleling the holes.
>
> Does any body know how those tapered holes were bored. She's after me to
> make a few for gifts!
>
> Thanks,
>
> max
>
>
>
>
> 
>
> Virus-free. www.avg.com
> 
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To post to this group, send email to
> legacy-ornamental-mills@googlegroups.com.
> Visit this group at
> https://groups.google.com/group/legacy-ornamental-mills.
> For more options, visit https://groups.google.com/d/optout.
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To post to this group, send email to
> legacy-ornamental-mills@googlegroups.com.
> Visit this group at
> https://groups.google.com/group/legacy-ornamental-mills.
> For more options, visit https://groups.google.com/d/optout.
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

Re: New Members and Moderation

[Rick Waters]

Hi!
I'm a new member.
I've been a woodworker since 2006.  I owned a couple of woodworking 
podcasts for a while (SplinteredBoard, and The Sawdust Chronicles).  I got 
into turning about 6 years ago.
Earlier this year my older sons asked me to make them custom pool cues.  I 
spent a lot of time building several versions of rail systems over my lathe 
(with a brand new bed extension) to hold a router.  None of them safe 
enough to actually use.
I recently saw a Craigslist post for a Legacy Wood Chuck, and I bought it.  
I haven't taken delivery of it yet, because I need help moving it, and I 
had to clear a space for it in my shop.  It's missing a ton of gears that I 
see most people have.  So, I'll be looking for those online somewhere, I 
guess.

Thanks for having me here!
Rick

On Saturday, March 31, 2012 at 7:07:09 PM UTC-5, Tim wrote:
>
> Hello New Members, 
>  
> This is a reminder that until you post a message, your messages must be 
> approved by either an owner or moderators of this group to be 
> posted.  Google sends an automated message to the people that 
> are responsible for approving messages, but please be aware it can be a 
> very long delay.   
>  
> Getting off the moderated list is easy as posting a message introducing 
> yourself.  Asking a question related to the equipment or posting a photo is 
> always good for getting instant approval.  I still believe this is a family 
> friendly place so please don't be shy.  
>  
> As of today, there are 63 members that have joined since 2010 that have 
> never posted a message.  I sure would like to hear from them either here in 
> this thread, or feel free to send me a note off the list so I can update 
> your status.  
>  
> -Tim
>  
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.