RE: Need help with Clamping systems and contour following setup

2018-04-18 Thread Bill Bulkeley 
Ok there is a download link from wetransfer to the group to download the video 
it is very large 1 gigabite its the only way i can to get it to you

Good luck i hope it works please let me know if you get it and if it works ok

Bill 

 

From: legacy-ornamental-mills@googlegroups.com 
[mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Tim Krause
Sent: Thursday, 19 April 2018 12:42 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: RE: Need help with Clamping systems and contour following setup

 

The longer link worked for me the second time I tried it. There is about two 
minutes of static to start so maybe try waiting? It made no sense that the link 
worked the second time.

On Apr 18, 2018, at 5:48 PM, MWF <mwfos...@earthlink.net> wrote:

Bill,
I, too, was unable to get either link to work.
Thanks for trying.
Mac

  _  

-Original Message- 
From: Bill Bulkeley 
Sent: Apr 18, 2018 8:32 PM 
To: legacy-ornamental-mills@googlegroups.com 
Subject: RE: Need help with Clamping systems and contour following setup 




Ok im trying another way keep watching the email don’t know if it will work 
please let me know

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
[mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Turan Tekin
Sent: Wednesday, 18 April 2018 9:33 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Need help with Clamping systems and contour following setup

 

​I had trouble with the videos, are they stored anywhere else I could try?  :

 

This link was 47 seconds of static:  
<https://www.dropbox.com/s/su4ag2he31ruqr3/woodchuck%20training%20video%203%20contour%20duplicator.VOB?dl=0>
 
https://www.dropbox.com/s/su4ag2he31ruqr3/woodchuck%20training%20video%203%20contour%20duplicator.VOB?dl=0

 

I could not open the public file at this link:  
<https://www.dropbox.com/home/Public> https://www.dropbox.com/home/Public

 

On Tue, Apr 17, 2018 at 5:54 PM, Bill Bulkeley <bulke...@mmnet.com.au> wrote:

https://www.dropbox.com/home/Public

try this one too it might work i always have trouble with this please anyone 
let me know if any of these links works the video goes for like 20 minuets

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
[mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Bill Bulkeley
Sent: Wednesday, 18 April 2018 7:43 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: RE: Need help with Clamping systems and contour following setup

 

Hi welcome to the group not sure why anybody else hasn’t answered your email 
yet, i have an old video on template work using the woodchuck legacy mill it’s 
not the same mill as yours but the principle is the same will try and post a 
link to it. 
https://www.dropbox.com/s/su4ag2he31ruqr3/woodchuck%20training%20video%203%20contour%20duplicator.VOB?dl=0

 

It might work let me know again welcome

 

Bill 

 

From: legacy-ornamental-mills@googlegroups.com 
[mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Turan Tekin
Sent: Tuesday, 17 April 2018 11:29 AM
To: Legacy Ornamental Mills
Subject: Need help with Clamping systems and contour following setup

 

Hi everyone!

 

I'm a new member here, thanks for letting me join the group. 

 

I'm a woodworking hobbyist in Atlanta, GA. I bought my LOM 15 years ago, set it 
up and moved to Europe before ever milling a single piece! I've just got it out 
of storage a few weeks ago and am anxious to get to work!

 

I have the 1000EX version (I think!?!) - no motor, just hand cranks. 

 

Apparently, I only partially finished setting it up and I have bags of parts 
for the horizontal and vertical clamps but no instructions on how to install 
them. 

 

I'm also interested in setting things up for contour following- I understand 
the premise of a pin following a template but can't seem to find any specifics 
on the setup or mounting systems. 

 

I'm a visual learner, so any images of your setups would be incredibly helpful. 

 

I'm looking forward to learning from you all and hope to have something to 
share soon. 

 

Thanks!

 

Turan 

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

 


 
<http://www.avg.com/email-signature?utm_medium=email_source=link_campaign=sig-email_content=emailclient>
 

Virus-free.  
<http://www.avg.com/email-signature?utm_medium=email_source=link_campaign=sig-email_content=emailclient>
 www.avg.com 

 

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To un

RE: Need help with Clamping systems and contour following setup

2018-04-18 Thread Tim Krause 
The longer link worked for me the second time I tried it. There is about two 
minutes of static to start so maybe try waiting? It made no sense that the link 
worked the second time.

On Apr 18, 2018, 5:48 PM, at 5:48 PM, MWF <mwfos...@earthlink.net> wrote:
>Bill,
>I, too, was unable to get either link to work.
>Thanks for trying.
>Mac
>_
>
>-Original Message- 
>From: Bill Bulkeley 
>Sent: Apr 18, 2018 8:32 PM 
>To: legacy-ornamental-mills@googlegroups.com 
>Subject: RE: Need help with Clamping systems and contour following
>setup 
>
>Ok im trying another way keep watching the email don’t know if it will
>work please let me know
>
>Bill
>
> 
>
>From: legacy-ornamental-mills@googlegroups.com
>[mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Turan
>Tekin
>Sent: Wednesday, 18 April 2018 9:33 PM
>To: legacy-ornamental-mills@googlegroups.com
>Subject: Re: Need help with Clamping systems and contour following
>setup
>
> 
>
>​I had trouble with the videos, are they stored anywhere else I could
>try?  :
>
> 
>
>This link was 47 seconds of static:
>https://www.dropbox.com/s/su4ag2he31ruqr3/woodchuck%20training%20video%203%20contour%20duplicator.VOB?dl=0
>
> 
>
>I could not open the public file at this link:
>https://www.dropbox.com/home/Public
>
> 
>
>On Tue, Apr 17, 2018 at 5:54 PM, Bill Bulkeley <bulke...@mmnet.com.au>
>wrote:
>
>https://www.dropbox.com/home/Public
>
>try this one too it might work i always have trouble with this please
>anyone let me know if any of these links works the video goes for like
>20 minuets
>
> 
>
>Bill
>
> 
>
>From: legacy-ornamental-mills@googlegroups.com
>[mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Bill
>Bulkeley
>Sent: Wednesday, 18 April 2018 7:43 AM
>To: legacy-ornamental-mills@googlegroups.com
>Subject: RE: Need help with Clamping systems and contour following
>setup
>
> 
>
>Hi welcome to the group not sure why anybody else hasn’t answered your
>email yet, i have an old video on template work using the woodchuck
>legacy mill it’s not the same mill as yours but the principle is the
>same will try and post a link to it.
>https://www.dropbox.com/s/su4ag2he31ruqr3/woodchuck%20training%20video%203%20contour%20duplicator.VOB?dl=0
>
> 
>
>It might work let me know again welcome
>
> 
>
>Bill 
>
> 
>
>From: legacy-ornamental-mills@googlegroups.com
>[mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Turan
>Tekin
>Sent: Tuesday, 17 April 2018 11:29 AM
>To: Legacy Ornamental Mills
>Subject: Need help with Clamping systems and contour following setup
>
> 
>
>Hi everyone!
>
> 
>
>I'm a new member here, thanks for letting me join the group. 
>
> 
>
>I'm a woodworking hobbyist in Atlanta, GA. I bought my LOM 15 years
>ago, set it up and moved to Europe before ever milling a single piece!
>I've just got it out of storage a few weeks ago and am anxious to get
>to work!
>
> 
>
>I have the 1000EX version (I think!?!) - no motor, just hand cranks. 
>
> 
>
>Apparently, I only partially finished setting it up and I have bags of
>parts for the horizontal and vertical clamps but no instructions on how
>to install them. 
>
> 
>
>I'm also interested in setting things up for contour following- I
>understand the premise of a pin following a template but can't seem to
>find any specifics on the setup or mounting systems. 
>
> 
>
>I'm a visual learner, so any images of your setups would be incredibly
>helpful. 
>
> 
>
>I'm looking forward to learning from you all and hope to have something
>to share soon. 
>
> 
>
>Thanks!
>
> 
>
>Turan 
>
>-- 
>You received this message because you are subscribed to the Google
>Groups "Legacy Ornamental Mills" group.
>To unsubscribe from this group and stop receiving emails from it, send
>an email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
>To post to this group, send email to
>legacy-ornamental-mills@googlegroups.com.
>Visit this group at
>https://groups.google.com/group/legacy-ornamental-mills.
>For more options, visit https://groups.google.com/d/optout.
>
> 
>
> 
>
>Virus-free. www.avg.com 
>
> 
>
>-- 
>You received this message because you are subscribed to the Google
>Groups "Legacy Ornamental Mills" group.
>To unsubscribe from this group and stop receiving emails from it, send
>an email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
>To post to this group, send email to
>legacy-ornamental-mills@googlegroups.com.
>Visit t

RE: Need help with Clamping systems and contour following setup

2018-04-18 Thread MWF 
Bill,I, too, was unable to get either link to work.Thanks for trying.Mac-Original Message-
From: Bill Bulkeley <bulke...@mmnet.com.au>
Sent: Apr 18, 2018 8:32 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: RE: Need help with Clamping systems and contour following setup






<zzz!--[if !mso]="">

<zzz![endif]-->

<zzz!--[if gte="" mso="" 9]="">
 
<zzz![endif]--><zzz!--[if gte="" mso="" 9]="">
 
  
 <zzz![endif]-->






Ok im trying another way keep watching the
email don’t know if it will work please let me know

Bill

 



From:
legacy-ornamental-mills@googlegroups.com
[mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Turan Tekin
Sent: Wednesday, 18 April 2018
9:33 PM
To:
legacy-ornamental-mills@googlegroups.com
Subject: Re: Need help with
Clamping systems and contour following setup



 





​I had trouble with the videos, are
they stored anywhere else I could try?  :





 





This link was 47 seconds of static: https://www.dropbox.com/s/su4ag2he31ruqr3/woodchuck%20training%20video%203%20contour%20duplicator.VOB?dl=0





 





I could not open the public file at this
link: https://www.dropbox.com/home/Public







 



On Tue, Apr 17, 2018 at 5:54 PM, Bill Bulkeley <bulke...@mmnet.com.au>
wrote:





https://www.dropbox.com/home/Public

try
this one too it might work i always have trouble with this please anyone let me
know if any of these links works the video goes for like 20 minuets

 

Bill

 





From: legacy-ornamental-mills@googlegroups.com
[mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Bill Bulkeley
Sent: Wednesday, 18 April 2018
7:43 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: RE: Need help with
Clamping systems and contour following setup









 

Hi
welcome to the group not sure why anybody else hasn’t answered your email yet,
i have an old video on template work using the woodchuck legacy mill it’s not
the same mill as yours but the principle is the same will try and post a link
to it. https://www.dropbox.com/s/su4ag2he31ruqr3/woodchuck%20training%20video%203%20contour%20duplicator.VOB?dl=0

 

It
might work let me know again welcome

 

Bill


 



From: legacy-ornamental-mills@googlegroups.com
[mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Turan Tekin
Sent: Tuesday, 17 April 2018 11:29
AM
To: Legacy Ornamental Mills
Subject: Need help with Clamping
systems and contour following setup



 



Hi everyone!



 





I'm a new member
here, thanks for letting me join the group. 





 





I'm a woodworking
hobbyist in Atlanta, GA. I bought my LOM 15 years ago, set it up and moved to
Europe before ever milling a single piece! I've just got it out of storage a
few weeks ago and am anxious to get to work!





 





I have the 1000EX
version (I think!?!) - no motor, just hand cranks. 





 





Apparently, I only
partially finished setting it up and I have bags of parts for the horizontal
and vertical clamps but no instructions on how to install them. 





 





I'm also
interested in setting things up for contour following- I understand the premise
of a pin following a template but can't seem to find any specifics on the setup
or mounting systems. 





 





I'm a visual
learner, so any images of your setups would be incredibly helpful. 





 





I'm looking
forward to learning from you all and hope to have something to share
soon. 





 





Thanks!





 





Turan 





-- 
You received this message because you are subscribed to the Google Groups
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.



 


 
  
  
  
  
  Virus-free.
  www.avg.com
  
  
 


 



-- 
You received this message because you are subscribed to the Google Groups
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.













-- 
You received this message because you are subscribed to the Google Groups
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-m

RE: Need help with Clamping systems and contour following setup

2018-04-18 Thread Bill Bulkeley 
Ok im trying another way keep watching the email don’t know if it will work 
please let me know

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
[mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Turan Tekin
Sent: Wednesday, 18 April 2018 9:33 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Need help with Clamping systems and contour following setup

 

​I had trouble with the videos, are they stored anywhere else I could try?  :

 

This link was 47 seconds of static:  
<https://www.dropbox.com/s/su4ag2he31ruqr3/woodchuck%20training%20video%203%20contour%20duplicator.VOB?dl=0>
 
https://www.dropbox.com/s/su4ag2he31ruqr3/woodchuck%20training%20video%203%20contour%20duplicator.VOB?dl=0

 

I could not open the public file at this link:  
<https://www.dropbox.com/home/Public> https://www.dropbox.com/home/Public

 

On Tue, Apr 17, 2018 at 5:54 PM, Bill Bulkeley <bulke...@mmnet.com.au> wrote:

https://www.dropbox.com/home/Public

try this one too it might work i always have trouble with this please anyone 
let me know if any of these links works the video goes for like 20 minuets

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
[mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Bill Bulkeley
Sent: Wednesday, 18 April 2018 7:43 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: RE: Need help with Clamping systems and contour following setup

 

Hi welcome to the group not sure why anybody else hasn’t answered your email 
yet, i have an old video on template work using the woodchuck legacy mill it’s 
not the same mill as yours but the principle is the same will try and post a 
link to it. 
https://www.dropbox.com/s/su4ag2he31ruqr3/woodchuck%20training%20video%203%20contour%20duplicator.VOB?dl=0

 

It might work let me know again welcome

 

Bill 

 

From: legacy-ornamental-mills@googlegroups.com 
[mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Turan Tekin
Sent: Tuesday, 17 April 2018 11:29 AM
To: Legacy Ornamental Mills
Subject: Need help with Clamping systems and contour following setup

 

Hi everyone!

 

I'm a new member here, thanks for letting me join the group. 

 

I'm a woodworking hobbyist in Atlanta, GA. I bought my LOM 15 years ago, set it 
up and moved to Europe before ever milling a single piece! I've just got it out 
of storage a few weeks ago and am anxious to get to work!

 

I have the 1000EX version (I think!?!) - no motor, just hand cranks. 

 

Apparently, I only partially finished setting it up and I have bags of parts 
for the horizontal and vertical clamps but no instructions on how to install 
them. 

 

I'm also interested in setting things up for contour following- I understand 
the premise of a pin following a template but can't seem to find any specifics 
on the setup or mounting systems. 

 

I'm a visual learner, so any images of your setups would be incredibly helpful. 

 

I'm looking forward to learning from you all and hope to have something to 
share soon. 

 

Thanks!

 

Turan 

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

 


 
<http://www.avg.com/email-signature?utm_medium=email_source=link_campaign=sig-email_content=emailclient>
 

Virus-free.  
<http://www.avg.com/email-signature?utm_medium=email_source=link_campaign=sig-email_content=emailclient>
 www.avg.com 

 

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

 

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+uns

Re: Need help with Clamping systems and contour following setup

2018-04-18 Thread Turan Tekin 
​I had trouble with the videos, are they stored anywhere else I could try?
:

This link was 47 seconds of static: https://www.dropbox.com/s/
su4ag2he31ruqr3/woodchuck%20training%20video%203%
20contour%20duplicator.VOB?dl=0

I could not open the public file at this link: https://www.dropbox.com/home/
Public

On Tue, Apr 17, 2018 at 5:54 PM, Bill Bulkeley <bulke...@mmnet.com.au>
wrote:

> https://www.dropbox.com/home/Public
>
> try this one too it might work i always have trouble with this please
> anyone let me know if any of these links works the video goes for like 20
> minuets
>
>
>
> Bill
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com [mailto:
> legacy-ornamental-mills@googlegroups.com] *On Behalf Of *Bill Bulkeley
> *Sent:* Wednesday, 18 April 2018 7:43 AM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* RE: Need help with Clamping systems and contour following setup
>
>
>
> Hi welcome to the group not sure why anybody else hasn’t answered your
> email yet, i have an old video on template work using the woodchuck legacy
> mill it’s not the same mill as yours but the principle is the same will try
> and post a link to it. https://www.dropbox.com/s/
> su4ag2he31ruqr3/woodchuck%20training%20video%203%
> 20contour%20duplicator.VOB?dl=0
>
>
>
> It might work let me know again welcome
>
>
>
> Bill
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com [mailto:
> legacy-ornamental-mills@googlegroups.com] *On Behalf Of *Turan Tekin
> *Sent:* Tuesday, 17 April 2018 11:29 AM
> *To:* Legacy Ornamental Mills
> *Subject:* Need help with Clamping systems and contour following setup
>
>
>
> Hi everyone!
>
>
>
> I'm a new member here, thanks for letting me join the group.
>
>
>
> I'm a woodworking hobbyist in Atlanta, GA. I bought my LOM 15 years ago,
> set it up and moved to Europe before ever milling a single piece! I've just
> got it out of storage a few weeks ago and am anxious to get to work!
>
>
>
> I have the 1000EX version (I think!?!) - no motor, just hand cranks.
>
>
>
> Apparently, I only partially finished setting it up and I have bags of
> parts for the horizontal and vertical clamps but no instructions on how to
> install them.
>
>
>
> I'm also interested in setting things up for contour following- I
> understand the premise of a pin following a template but can't seem to find
> any specifics on the setup or mounting systems.
>
>
>
> I'm a visual learner, so any images of your setups would be incredibly
> helpful.
>
>
>
> I'm looking forward to learning from you all and hope to have something to
> share soon.
>
>
>
> Thanks!
>
>
>
> Turan
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To post to this group, send email to legacy-ornamental-mills@
> googlegroups.com.
> Visit this group at https://groups.google.com/
> group/legacy-ornamental-mills.
> For more options, visit https://groups.google.com/d/optout.
>
>
>
>
> <http://www.avg.com/email-signature?utm_medium=email_source=link_campaign=sig-email_content=emailclient>
>
> Virus-free. www.avg.com
> <http://www.avg.com/email-signature?utm_medium=email_source=link_campaign=sig-email_content=emailclient>
>
>
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To post to this group, send email to legacy-ornamental-mills@
> googlegroups.com.
> Visit this group at https://groups.google.com/
> group/legacy-ornamental-mills.
> For more options, visit https://groups.google.com/d/optout.
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To post to this group, send email to legacy-ornamental-mills@
> googlegroups.com.
> Visit this group at https://groups.google.com/
> group/legacy-ornamental-mills.
> For more options, visit https://groups.google.com/d/optout.
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

Re: Need help with Clamping systems and contour following setup

2018-04-18 Thread Tekin Turan 
This should be what I need, Thank you! 

> On Apr 17, 2018, at 11:04 PM, Harvey Matyas  wrote:
> 
> I don't know if this will help you.
> 
> https://groups.google.com/forum/#!msg/legacy-ornamental-mills/V9bvBJB7iJw/1NYRG2J8NQAJ;context-place=forum/legacy-ornamental-mills
> 
> Go to the user's group email and type manual in the search.
> 
> Harvey
> 
> 
> 
>> On Tue, Apr 17, 2018 at 9:54 PM, Tekin Turan  wrote:
>> Hi Tim-
>> 
>> Cannot find the manual. Is it available online somewhere you could point me?
>> 
>> For templates, my thought was to do round work like a copy lathe. A few of 
>> the posts I’ve read here lead me to believe that isn’t something the LOM is 
>> designed for. 
>> 
>>> On Apr 17, 2018, at 9:22 PM, Tim Krause  wrote:
>>> 
>>> Do you have the manual?  That should cover assembly of the horizontal and 
>>> vertical clamps.
>>> 
>>> Are you planning on using the templates to turn something or for doing some 
>>> flat work?  
>>> 
>>> Tim
>>> 
>>> PS. Welcome to the group.
 On Apr 16, 2018, at 6:28 PM, Turan Tekin  wrote:
 Hi everyone!
 
 I'm a new member here, thanks for letting me join the group. 
 
 I'm a woodworking hobbyist in Atlanta, GA. I bought my LOM 15 years ago, 
 set it up and moved to Europe before ever milling a single piece! I've 
 just got it out of storage a few weeks ago and am anxious to get to work!
 
 I have the 1000EX version (I think!?!) - no motor, just hand cranks. 
 
 Apparently, I only partially finished setting it up and I have bags of 
 parts for the horizontal and vertical clamps but no instructions on how to 
 install them. 
 
 I'm also interested in setting things up for contour following- I 
 understand the premise of a pin following a template but can't seem to 
 find any specifics on the setup or mounting systems. 
 
 I'm a visual learner, so any images of your setups would be incredibly 
 helpful. 
 
 I'm looking forward to learning from you all and hope to have something to 
 share soon. 
 
 Thanks!
 
 Turan 
>>> 
>>> -- 
>>> You received this message because you are subscribed to the Google Groups 
>>> "Legacy Ornamental Mills" group.
>>> To unsubscribe from this group and stop receiving emails from it, send an 
>>> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
>>> To post to this group, send email to 
>>> legacy-ornamental-mills@googlegroups.com.
>>> Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
>>> For more options, visit https://groups.google.com/d/optout.
>> 
>> -- 
>> You received this message because you are subscribed to the Google Groups 
>> "Legacy Ornamental Mills" group.
>> To unsubscribe from this group and stop receiving emails from it, send an 
>> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
>> To post to this group, send email to 
>> legacy-ornamental-mills@googlegroups.com.
>> Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
>> For more options, visit https://groups.google.com/d/optout.
> 
> -- 
> You received this message because you are subscribed to the Google Groups 
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an 
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
> Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
> For more options, visit https://groups.google.com/d/optout.

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

Re: Need help with Clamping systems and contour following setup

2018-04-18 Thread Tim Krause 
Can you take a photo of your mill so I can get you the correct manual.  
Template turning does work, it just take practice.  There is very little 
documentation on the technique.  The video bill pointed out is a very good 
reference.

Tim

On Apr 17, 2018, 7:54 PM, at 7:54 PM, Tekin Turan  wrote:
>Hi Tim-
>
>Cannot find the manual. Is it available online somewhere you could
>point me?
>
>For templates, my thought was to do round work like a copy lathe. A few
>of the posts I’ve read here lead me to believe that isn’t something the
>LOM is designed for. 
>
>> On Apr 17, 2018, at 9:22 PM, Tim Krause 
>wrote:
>> 
>> Do you have the manual?  That should cover assembly of the horizontal
>and vertical clamps.
>> 
>> Are you planning on using the templates to turn something or for
>doing some flat work?  
>> 
>> Tim
>> 
>> PS. Welcome to the group.
>>> On Apr 16, 2018, at 6:28 PM, Turan Tekin  wrote:
>>> Hi everyone!
>>> 
>>> I'm a new member here, thanks for letting me join the group. 
>>> 
>>> I'm a woodworking hobbyist in Atlanta, GA. I bought my LOM 15 years
>ago, set it up and moved to Europe before ever milling a single piece!
>I've just got it out of storage a few weeks ago and am anxious to get
>to work!
>>> 
>>> I have the 1000EX version (I think!?!) - no motor, just hand cranks.
>
>>> 
>>> Apparently, I only partially finished setting it up and I have bags
>of parts for the horizontal and vertical clamps but no instructions on
>how to install them. 
>>> 
>>> I'm also interested in setting things up for contour following- I
>understand the premise of a pin following a template but can't seem to
>find any specifics on the setup or mounting systems. 
>>> 
>>> I'm a visual learner, so any images of your setups would be
>incredibly helpful. 
>>> 
>>> I'm looking forward to learning from you all and hope to have
>something to share soon. 
>>> 
>>> Thanks!
>>> 
>>> Turan 
>> 
>> -- 
>> You received this message because you are subscribed to the Google
>Groups "Legacy Ornamental Mills" group.
>> To unsubscribe from this group and stop receiving emails from it,
>send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
>> To post to this group, send email to
>legacy-ornamental-mills@googlegroups.com.
>> Visit this group at
>https://groups.google.com/group/legacy-ornamental-mills.
>> For more options, visit https://groups.google.com/d/optout.
>
>-- 
>You received this message because you are subscribed to the Google
>Groups "Legacy Ornamental Mills" group.
>To unsubscribe from this group and stop receiving emails from it, send
>an email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
>To post to this group, send email to
>legacy-ornamental-mills@googlegroups.com.
>Visit this group at
>https://groups.google.com/group/legacy-ornamental-mills.
>For more options, visit https://groups.google.com/d/optout.

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

Re: Need help with Clamping systems and contour following setup

2018-04-17 Thread 'Curt George' via Legacy Ornamental Mills 
Hello TekinThe key words here are designed for... The Legacy can do a lot, but 
there are somethings that is dose better then others. making your Legacy into a 
copy lathe of sorts would not be my first choice of projects, I would try 
starting a new.And starting with some basics first.
 Bill's video "Profile following" is a very good example of some of the 
possibility's that are open to you. but ... you will have to make and or modify 
your machine a little to do it.  Wait until you see the video for your self.
If you need any help putting your machine together, Just ask, I also own a 
1000ex. I know your model pretty well.
Have a good night.C.A.G. 

On Tuesday, April 17, 2018 10:54 PM, Tekin Turan  wrote:
 

 Hi Tim-
Cannot find the manual. Is it available online somewhere you could point me?
For templates, my thought was to do round work like a copy lathe. A few of the 
posts I’ve read here lead me to believe that isn’t something the LOM is 
designed for. 
On Apr 17, 2018, at 9:22 PM, Tim Krause  wrote:


Do you have the manual?  That should cover assembly of the horizontal and 
vertical clamps.

Are you planning on using the templates to turn something or for doing some 
flat work?  

Tim

PS. Welcome to the group.On Apr 16, 2018, at 6:28 PM, Turan Tekin 
 wrote:
Hi everyone!
I'm a new member here, thanks for letting me join the group. 
I'm a woodworking hobbyist in Atlanta, GA. I bought my LOM 15 years ago, set it 
up and moved to Europe before ever milling a single piece! I've just got it out 
of storage a few weeks ago and am anxious to get to work!
I have the 1000EX version (I think!?!) - no motor, just hand cranks. 
Apparently, I only partially finished setting it up and I have bags of parts 
for the horizontal and vertical clamps but no instructions on how to install 
them. 
I'm also interested in setting things up for contour following- I understand 
the premise of a pin following a template but can't seem to find any specifics 
on the setup or mounting systems. 
I'm a visual learner, so any images of your setups would be incredibly helpful. 
I'm looking forward to learning from you all and hope to have something to 
share soon. 
Thanks!
Turan 
-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.


   

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

Re: Need help with Clamping systems and contour following setup

2018-04-17 Thread Harvey Matyas 
I don't know if this will help you.

https://groups.google.com/forum/#!msg/legacy-ornamental-mills/V9bvBJB7iJw/1NYRG2J8NQAJ;context-place=forum/legacy-ornamental-mills

Go to the user's group email and type manual in the search.

Harvey



On Tue, Apr 17, 2018 at 9:54 PM, Tekin Turan  wrote:

> Hi Tim-
>
> Cannot find the manual. Is it available online somewhere you could point
> me?
>
> For templates, my thought was to do round work like a copy lathe. A few of
> the posts I’ve read here lead me to believe that isn’t something the LOM is
> designed for.
>
> On Apr 17, 2018, at 9:22 PM, Tim Krause  wrote:
>
> Do you have the manual?  That should cover assembly of the horizontal and
> vertical clamps.
>
> Are you planning on using the templates to turn something or for doing
> some flat work?
>
> Tim
>
> PS. Welcome to the group.
> On Apr 16, 2018, at 6:28 PM, Turan Tekin  wrote:
>>
>> Hi everyone!
>>
>> I'm a new member here, thanks for letting me join the group.
>>
>> I'm a woodworking hobbyist in Atlanta, GA. I bought my LOM 15 years ago,
>> set it up and moved to Europe before ever milling a single piece! I've just
>> got it out of storage a few weeks ago and am anxious to get to work!
>>
>> I have the 1000EX version (I think!?!) - no motor, just hand cranks.
>>
>> Apparently, I only partially finished setting it up and I have bags of
>> parts for the horizontal and vertical clamps but no instructions on how to
>> install them.
>>
>> I'm also interested in setting things up for contour following- I
>> understand the premise of a pin following a template but can't seem to find
>> any specifics on the setup or mounting systems.
>>
>> I'm a visual learner, so any images of your setups would be incredibly
>> helpful.
>>
>> I'm looking forward to learning from you all and hope to have something
>> to share soon.
>>
>> Thanks!
>>
>> Turan
>>
>> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To post to this group, send email to legacy-ornamental-mills@
> googlegroups.com.
> Visit this group at https://groups.google.com/
> group/legacy-ornamental-mills.
> For more options, visit https://groups.google.com/d/optout.
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To post to this group, send email to legacy-ornamental-mills@
> googlegroups.com.
> Visit this group at https://groups.google.com/
> group/legacy-ornamental-mills.
> For more options, visit https://groups.google.com/d/optout.
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

Re: Need help with Clamping systems and contour following setup

2018-04-17 Thread Tekin Turan 
Hi Tim-

Cannot find the manual. Is it available online somewhere you could point me?

For templates, my thought was to do round work like a copy lathe. A few of the 
posts I’ve read here lead me to believe that isn’t something the LOM is 
designed for. 

> On Apr 17, 2018, at 9:22 PM, Tim Krause  wrote:
> 
> Do you have the manual?  That should cover assembly of the horizontal and 
> vertical clamps.
> 
> Are you planning on using the templates to turn something or for doing some 
> flat work?  
> 
> Tim
> 
> PS. Welcome to the group.
>> On Apr 16, 2018, at 6:28 PM, Turan Tekin  wrote:
>> Hi everyone!
>> 
>> I'm a new member here, thanks for letting me join the group. 
>> 
>> I'm a woodworking hobbyist in Atlanta, GA. I bought my LOM 15 years ago, set 
>> it up and moved to Europe before ever milling a single piece! I've just got 
>> it out of storage a few weeks ago and am anxious to get to work!
>> 
>> I have the 1000EX version (I think!?!) - no motor, just hand cranks. 
>> 
>> Apparently, I only partially finished setting it up and I have bags of parts 
>> for the horizontal and vertical clamps but no instructions on how to install 
>> them. 
>> 
>> I'm also interested in setting things up for contour following- I understand 
>> the premise of a pin following a template but can't seem to find any 
>> specifics on the setup or mounting systems. 
>> 
>> I'm a visual learner, so any images of your setups would be incredibly 
>> helpful. 
>> 
>> I'm looking forward to learning from you all and hope to have something to 
>> share soon. 
>> 
>> Thanks!
>> 
>> Turan 
> 
> -- 
> You received this message because you are subscribed to the Google Groups 
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an 
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
> Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
> For more options, visit https://groups.google.com/d/optout.

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

Re: Need help with Clamping systems and contour following setup

2018-04-17 Thread Tim Krause 
Do you have the manual?  That should cover assembly of the horizontal and 
vertical clamps.

Are you planning on using the templates to turn something or for doing some 
flat work?  

Tim

PS. Welcome to the group.

On Apr 16, 2018, 6:28 PM, at 6:28 PM, Turan Tekin  wrote:
>Hi everyone!
>
>I'm a new member here, thanks for letting me join the group. 
>
>I'm a woodworking hobbyist in Atlanta, GA. I bought my LOM 15 years
>ago, 
>set it up and moved to Europe before ever milling a single piece! I've
>just 
>got it out of storage a few weeks ago and am anxious to get to work!
>
>I have the 1000EX version (I think!?!) - no motor, just hand cranks. 
>
>Apparently, I only partially finished setting it up and I have bags of 
>parts for the horizontal and vertical clamps but no instructions on how
>to 
>install them. 
>
>I'm also interested in setting things up for contour following- I 
>understand the premise of a pin following a template but can't seem to
>find 
>any specifics on the setup or mounting systems. 
>
>I'm a visual learner, so any images of your setups would be incredibly 
>helpful. 
>
>I'm looking forward to learning from you all and hope to have something
>to 
>share soon. 
>
>Thanks!
>
>Turan 
>
>-- 
>You received this message because you are subscribed to the Google
>Groups "Legacy Ornamental Mills" group.
>To unsubscribe from this group and stop receiving emails from it, send
>an email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
>To post to this group, send email to
>legacy-ornamental-mills@googlegroups.com.
>Visit this group at
>https://groups.google.com/group/legacy-ornamental-mills.
>For more options, visit https://groups.google.com/d/optout.

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

Re: Need help with Clamping systems and contour following setup

2018-04-17 Thread Tekin Turan 
Thanks, Bill!

I’ll take a look when I get home- I really appreciate your help. 

> On Apr 17, 2018, at 5:54 PM, Bill Bulkeley <bulke...@mmnet.com.au> wrote:
> 
> https://www.dropbox.com/home/Public
> try this one too it might work i always have trouble with this please anyone 
> let me know if any of these links works the video goes for like 20 minuets
>  
> Bill
>  
> From: legacy-ornamental-mills@googlegroups.com 
> [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Bill Bulkeley
> Sent: Wednesday, 18 April 2018 7:43 AM
> To: legacy-ornamental-mills@googlegroups.com
> Subject: RE: Need help with Clamping systems and contour following setup
>  
> Hi welcome to the group not sure why anybody else hasn’t answered your email 
> yet, i have an old video on template work using the woodchuck legacy mill 
> it’s not the same mill as yours but the principle is the same will try and 
> post a link to it. 
> https://www.dropbox.com/s/su4ag2he31ruqr3/woodchuck%20training%20video%203%20contour%20duplicator.VOB?dl=0
>  
> It might work let me know again welcome
>  
> Bill
>  
> From: legacy-ornamental-mills@googlegroups.com 
> [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Turan Tekin
> Sent: Tuesday, 17 April 2018 11:29 AM
> To: Legacy Ornamental Mills
> Subject: Need help with Clamping systems and contour following setup
>  
> Hi everyone!
>  
> I'm a new member here, thanks for letting me join the group. 
>  
> I'm a woodworking hobbyist in Atlanta, GA. I bought my LOM 15 years ago, set 
> it up and moved to Europe before ever milling a single piece! I've just got 
> it out of storage a few weeks ago and am anxious to get to work!
>  
> I have the 1000EX version (I think!?!) - no motor, just hand cranks. 
>  
> Apparently, I only partially finished setting it up and I have bags of parts 
> for the horizontal and vertical clamps but no instructions on how to install 
> them. 
>  
> I'm also interested in setting things up for contour following- I understand 
> the premise of a pin following a template but can't seem to find any 
> specifics on the setup or mounting systems. 
>  
> I'm a visual learner, so any images of your setups would be incredibly 
> helpful. 
>  
> I'm looking forward to learning from you all and hope to have something to 
> share soon. 
>  
> Thanks!
>  
> Turan 
> -- 
> You received this message because you are subscribed to the Google Groups 
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an 
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
> Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
> For more options, visit https://groups.google.com/d/optout.
>  
> 
> Virus-free. www.avg.com
>  
> -- 
> You received this message because you are subscribed to the Google Groups 
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an 
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
> Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
> For more options, visit https://groups.google.com/d/optout.
> -- 
> You received this message because you are subscribed to the Google Groups 
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an 
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
> Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
> For more options, visit https://groups.google.com/d/optout.

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

RE: Need help with Clamping systems and contour following setup

2018-04-17 Thread Bill Bulkeley 
https://www.dropbox.com/home/Public

try this one too it might work i always have trouble with this please anyone 
let me know if any of these links works the video goes for like 20 minuets

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
[mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Bill Bulkeley
Sent: Wednesday, 18 April 2018 7:43 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: RE: Need help with Clamping systems and contour following setup

 

Hi welcome to the group not sure why anybody else hasn’t answered your email 
yet, i have an old video on template work using the woodchuck legacy mill it’s 
not the same mill as yours but the principle is the same will try and post a 
link to it. 
https://www.dropbox.com/s/su4ag2he31ruqr3/woodchuck%20training%20video%203%20contour%20duplicator.VOB?dl=0

 

It might work let me know again welcome

 

Bill 

 

From: legacy-ornamental-mills@googlegroups.com 
[mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Turan Tekin
Sent: Tuesday, 17 April 2018 11:29 AM
To: Legacy Ornamental Mills
Subject: Need help with Clamping systems and contour following setup

 

Hi everyone!

 

I'm a new member here, thanks for letting me join the group. 

 

I'm a woodworking hobbyist in Atlanta, GA. I bought my LOM 15 years ago, set it 
up and moved to Europe before ever milling a single piece! I've just got it out 
of storage a few weeks ago and am anxious to get to work!

 

I have the 1000EX version (I think!?!) - no motor, just hand cranks. 

 

Apparently, I only partially finished setting it up and I have bags of parts 
for the horizontal and vertical clamps but no instructions on how to install 
them. 

 

I'm also interested in setting things up for contour following- I understand 
the premise of a pin following a template but can't seem to find any specifics 
on the setup or mounting systems. 

 

I'm a visual learner, so any images of your setups would be incredibly helpful. 

 

I'm looking forward to learning from you all and hope to have something to 
share soon. 

 

Thanks!

 

Turan 

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

 


 
<http://www.avg.com/email-signature?utm_medium=email_source=link_campaign=sig-email_content=emailclient>
 

Virus-free.  
<http://www.avg.com/email-signature?utm_medium=email_source=link_campaign=sig-email_content=emailclient>
 www.avg.com 

 

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

RE: Need help with Clamping systems and contour following setup

2018-04-17 Thread Bill Bulkeley 
Hi welcome to the group not sure why anybody else hasn’t answered your email 
yet, i have an old video on template work using the woodchuck legacy mill it’s 
not the same mill as yours but the principle is the same will try and post a 
link to it. 
https://www.dropbox.com/s/su4ag2he31ruqr3/woodchuck%20training%20video%203%20contour%20duplicator.VOB?dl=0

 

It might work let me know again welcome

 

Bill 

 

From: legacy-ornamental-mills@googlegroups.com 
[mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Turan Tekin
Sent: Tuesday, 17 April 2018 11:29 AM
To: Legacy Ornamental Mills
Subject: Need help with Clamping systems and contour following setup

 

Hi everyone!

 

I'm a new member here, thanks for letting me join the group. 

 

I'm a woodworking hobbyist in Atlanta, GA. I bought my LOM 15 years ago, set it 
up and moved to Europe before ever milling a single piece! I've just got it out 
of storage a few weeks ago and am anxious to get to work!

 

I have the 1000EX version (I think!?!) - no motor, just hand cranks. 

 

Apparently, I only partially finished setting it up and I have bags of parts 
for the horizontal and vertical clamps but no instructions on how to install 
them. 

 

I'm also interested in setting things up for contour following- I understand 
the premise of a pin following a template but can't seem to find any specifics 
on the setup or mounting systems. 

 

I'm a visual learner, so any images of your setups would be incredibly helpful. 

 

I'm looking forward to learning from you all and hope to have something to 
share soon. 

 

Thanks!

 

Turan 

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

 


 
<http://www.avg.com/email-signature?utm_medium=email_source=link_campaign=sig-email_content=emailclient>
 

Virus-free.  
<http://www.avg.com/email-signature?utm_medium=email_source=link_campaign=sig-email_content=emailclient>
 www.avg.com 

 

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

Need help with Clamping systems and contour following setup

2018-04-16 Thread Turan Tekin 
Hi everyone!

I'm a new member here, thanks for letting me join the group. 

I'm a woodworking hobbyist in Atlanta, GA. I bought my LOM 15 years ago, 
set it up and moved to Europe before ever milling a single piece! I've just 
got it out of storage a few weeks ago and am anxious to get to work!

I have the 1000EX version (I think!?!) - no motor, just hand cranks. 

Apparently, I only partially finished setting it up and I have bags of 
parts for the horizontal and vertical clamps but no instructions on how to 
install them. 

I'm also interested in setting things up for contour following- I 
understand the premise of a pin following a template but can't seem to find 
any specifics on the setup or mounting systems. 

I'm a visual learner, so any images of your setups would be incredibly 
helpful. 

I'm looking forward to learning from you all and hope to have something to 
share soon. 

Thanks!

Turan 

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.