subject:"RE\: Cutting threads in wood w\/router bit"

Re: Cutting threads in wood w/router bit

2021-04-10 Thread Tim Ziegler

Yup for sure. Well with in reason. I'm all German  and can be a stitch
stubborn lol
Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Sat, Apr 10, 2021 at 7:33 AM  wrote:

> Well you know the secret to true harmony what Momma wants Momma gets 
>
>
>
> Bill
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Tim Ziegler
> *Sent:* Saturday, 10 April 2021 9:06 PM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* Re: Cutting threads in wood w/router bit
>
>
>
> Hey thanks for throwing that back in there. seeing at least twice this
> week
>
> must mean its time for me to order it and try.
>
> Like Mac said I need to make a box with rossette on the cover with a
>
> threaded lid.
>
> Have to have a island light for Momma today along with putting
>
> my window trim rosettes in place. "yes the simple ones"  she loves them.
>
> Kind Regards,
>
>
>
> Timothy J. Ziegler
>
> Ziegler WoodWork & Specialty
>
> 14171 160th Ave.
>
> Foreston MN 56330
>
>
>
> 320-294-5798 shop
>
> 320-630-2243 cell
>
>
>
>
>
> On Sat, Apr 10, 2021 at 1:23 AM  wrote:
>
> Not an acme thread no.
> Because wood is not as strong as metal and prone to chipping and tearing
> especially at the point of the thread, traditionally wood threads where the
> blunter  45 degrees to help with this its just People have gotten lazy over
> the years and are ignoring the correct angle that wood threads should be. I
> believe if you look it up in the  Diderot Encyclopedia it is explained
> there its been a long time for me but I learnt it when I was an apprentice
> many years ago. Magnate even mentions it a little with their very tool
> https://www.magnate.net/SearchResults.asp?Cat=230811
>
>
> Bill
>
>
> -Original Message-----
> From: legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> On Behalf Of anthony
> Sent: Saturday, 10 April 2021 2:59 AM
> To: legacy-ornamental-mills@googlegroups.com
> Subject: Re: Cutting threads in wood w/router bit
>
> Are you talking about an ACME thread; where the profile of the thread is
> square?
> A lot of standard threads are cut in wood.  Sixty degrees, isn't it?
>
>
> To forgive is to set a prisoner free and discover that the prisoner was
> you.
> .
> -Original Message-
> From: M.W.Foscue
> Sent: Friday, April 09, 2021 9:23 AM
> To: LOM Group
> Subject: Cutting threads in wood w/router bit
>
>
> Hi ya'll,
>
> New Topic here:
>
> The below link is to a router bit sold by Magnate.
> It is described as one for cutting threads in wood - with a 90º angle.
> Bill, you (and maybe others) discussed the angle of the "the valley" the
> cutter makes - that it is different for metal vs wood.
> Is it also different for hard woods vs soft woods?
>
> Has anyone used the below Magnate bit to make threads?
>
> https://www.ebay.com/itm/153156308964?ul_noapp=true
>
> Have a Safe & Fun-filled weekend!
> Mac
>
>
>
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
>
> https://groups.google.com/d/msgid/legacy-ornamental-mills/523397271.1747.1617978217174%40wamui-bison.atl.sa.earthlink.net.
>
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/8F822B69E38841A1B43FAD3BA37EE3EC%40acmePC
> .
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/000e01d72dd2%24033cfe70%2409b6fb50%24%40mmnet.com.au
> .
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it,

RE: Cutting threads in wood w/router bit

2021-04-10 Thread bulkeley

Well you know the secret to true harmony what Momma wants Momma gets 

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of Tim Ziegler
Sent: Saturday, 10 April 2021 9:06 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Cutting threads in wood w/router bit

 

Hey thanks for throwing that back in there. seeing at least twice this week 

must mean its time for me to order it and try. 

Like Mac said I need to make a box with rossette on the cover with a 

threaded lid. 

Have to have a island light for Momma today along with putting

my window trim rosettes in place. "yes the simple ones"  she loves them.


Kind Regards,

 

Timothy J. Ziegler

Ziegler WoodWork & Specialty

14171 160th Ave.

Foreston MN 56330

 

320-294-5798 shop

320-630-2243 cell

 

 

On Sat, Apr 10, 2021 at 1:23 AM mailto:bulke...@mmnet.com.au> > wrote:

Not an acme thread no.
Because wood is not as strong as metal and prone to chipping and tearing 
especially at the point of the thread, traditionally wood threads where the 
blunter  45 degrees to help with this its just People have gotten lazy over the 
years and are ignoring the correct angle that wood threads should be. I believe 
if you look it up in the  Diderot Encyclopedia it is explained there its been a 
long time for me but I learnt it when I was an apprentice many years ago. 
Magnate even mentions it a little with their very tool
https://www.magnate.net/SearchResults.asp?Cat=230811


Bill


-Original Message-
From: legacy-ornamental-mills@googlegroups.com 
<mailto:legacy-ornamental-mills@googlegroups.com>  
mailto:legacy-ornamental-mills@googlegroups.com> > On Behalf Of anthony
Sent: Saturday, 10 April 2021 2:59 AM
To: legacy-ornamental-mills@googlegroups.com 
<mailto:legacy-ornamental-mills@googlegroups.com> 
Subject: Re: Cutting threads in wood w/router bit

Are you talking about an ACME thread; where the profile of the thread is square?
A lot of standard threads are cut in wood.  Sixty degrees, isn't it?


To forgive is to set a prisoner free and discover that the prisoner was you.
.
-Original Message- 
From: M.W.Foscue
Sent: Friday, April 09, 2021 9:23 AM
To: LOM Group
Subject: Cutting threads in wood w/router bit


Hi ya'll,

New Topic here:

The below link is to a router bit sold by Magnate.
It is described as one for cutting threads in wood - with a 90º angle.
Bill, you (and maybe others) discussed the angle of the "the valley" the 
cutter makes - that it is different for metal vs wood.
Is it also different for hard woods vs soft woods?

Has anyone used the below Magnate bit to make threads?

https://www.ebay.com/itm/153156308964?ul_noapp=true

Have a Safe & Fun-filled weekend!
Mac




-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an 
email to legacy-ornamental-mills+unsubscr...@googlegroups.com 
<mailto:legacy-ornamental-mills%2bunsubscr...@googlegroups.com> .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/523397271.1747.1617978217174%40wamui-bison.atl.sa.earthlink.net.
 

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
<mailto:legacy-ornamental-mills%2bunsubscr...@googlegroups.com> .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/8F822B69E38841A1B43FAD3BA37EE3EC%40acmePC.

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
<mailto:legacy-ornamental-mills%2bunsubscr...@googlegroups.com> .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/000e01d72dd2%24033cfe70%2409b6fb50%24%40mmnet.com.au.

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
<mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLEFcCEwsN0YwFetZu29x71828WSbxGBo_p%3D1vUvGngA-Q%40mail.gmail.com
 
<https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLEFcCEwsN0YwFetZu29x71828WSbxGBo_p%3D1vUvGngA-Q%40mail.gmail.com?utm_medium=email_source=footer>
 .

-- 
You received this message because you are subscribed to the Google Groups 
&

Re: Cutting threads in wood w/router bit

2021-04-10 Thread Tim Ziegler

Hey thanks for throwing that back in there. seeing at least twice this week
must mean its time for me to order it and try.
Like Mac said I need to make a box with rossette on the cover with a
threaded lid.
Have to have a island light for Momma today along with putting
my window trim rosettes in place. "yes the simple ones"  she loves them.
Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Sat, Apr 10, 2021 at 1:23 AM  wrote:

> Not an acme thread no.
> Because wood is not as strong as metal and prone to chipping and tearing
> especially at the point of the thread, traditionally wood threads where the
> blunter  45 degrees to help with this its just People have gotten lazy over
> the years and are ignoring the correct angle that wood threads should be. I
> believe if you look it up in the  Diderot Encyclopedia it is explained
> there its been a long time for me but I learnt it when I was an apprentice
> many years ago. Magnate even mentions it a little with their very tool
> https://www.magnate.net/SearchResults.asp?Cat=230811
>
>
> Bill
>
>
> -Original Message-
> From: legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> On Behalf Of anthony
> Sent: Saturday, 10 April 2021 2:59 AM
> To: legacy-ornamental-mills@googlegroups.com
> Subject: Re: Cutting threads in wood w/router bit
>
> Are you talking about an ACME thread; where the profile of the thread is
> square?
> A lot of standard threads are cut in wood.  Sixty degrees, isn't it?
>
>
> To forgive is to set a prisoner free and discover that the prisoner was
> you.
> .
> -Original Message-
> From: M.W.Foscue
> Sent: Friday, April 09, 2021 9:23 AM
> To: LOM Group
> Subject: Cutting threads in wood w/router bit
>
>
> Hi ya'll,
>
> New Topic here:
>
> The below link is to a router bit sold by Magnate.
> It is described as one for cutting threads in wood - with a 90º angle.
> Bill, you (and maybe others) discussed the angle of the "the valley" the
> cutter makes - that it is different for metal vs wood.
> Is it also different for hard woods vs soft woods?
>
> Has anyone used the below Magnate bit to make threads?
>
> https://www.ebay.com/itm/153156308964?ul_noapp=true
>
> Have a Safe & Fun-filled weekend!
> Mac
>
>
>
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
>
> https://groups.google.com/d/msgid/legacy-ornamental-mills/523397271.1747.1617978217174%40wamui-bison.atl.sa.earthlink.net.
>
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/8F822B69E38841A1B43FAD3BA37EE3EC%40acmePC
> .
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/000e01d72dd2%24033cfe70%2409b6fb50%24%40mmnet.com.au
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLEFcCEwsN0YwFetZu29x71828WSbxGBo_p%3D1vUvGngA-Q%40mail.gmail.com.

Re: Cutting threads in wood w/router bit

2021-04-10 Thread Tim Ziegler

Oh that all makes sense.
I guess that all makes sense but would be worth trying.
I really got to get on this threading thing and learn it more.

Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Sat, Apr 10, 2021 at 12:33 AM  wrote:

> Possibly I have done extensive metal threading with a boring bar in my
> engineering days but at the slow feeds of threading with a boring bare in
> the legacy the wood has a terrible chance of tearing really bad I don’t say
> its impossible, I could do something on the metal lathe but this is about
> doing it on the legacy go try it you might get it to work. soaking the wood
> in oil for a few days would defiantly help with this but after you would
> never get any finish but an oil to adhere to the wood.
>
>
>
> Bill
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Tim Ziegler
> *Sent:* Saturday, 10 April 2021 1:17 PM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* Re: Cutting threads in wood w/router bit
>
>
>
> So what about boring bars Bill? My brother does metal work and I've watched
>
> him use a boring bar for threading deeper?
>
>
> Kind Regards,
>
>
>
> Timothy J. Ziegler
>
> Ziegler WoodWork & Specialty
>
> 14171 160th Ave.
>
> Foreston MN 56330
>
>
>
> 320-294-5798 shop
>
> 320-630-2243 cell
>
>
>
>
>
> On Fri, Apr 9, 2021 at 9:39 PM  wrote:
>
> The nut actually only has 3 ¼  inches of thread the absolute limit of
> thread it will cut, adding a ¼ chamfer each end gave me an extra ½ inch
> longer nut length. if I needed longer I would make several 3 inch threaded
> sleeves and glue them in the inside to make a longer threaded bore.
>
>
>
> Bill
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *M.W.Foscue
> *Sent:* Saturday, 10 April 2021 12:16 PM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* RE: Cutting threads in wood w/router bit
>
>
>
> Ok - I got it.
>
> So - how did you get a nut ~6" deep threaded?   Go 3" in  - then turn the
> nut around and cut threads from the inside to the outside?
>
> Mac
> --
>
> -Original Message-
> From: bulke...@mmnet.com.au
> Sent: Apr 9, 2021 10:10 PM
> To: legacy-ornamental-mills@googlegroups.com
> Subject: RE: Cutting threads in wood w/router bit
>
> No because the bolt is longer than the router bit, the internal threading
> bit can only do about 3 inches of thread where the bolt is like 16 inches
> long
>
>
>
> Bill
> --
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *M.W.Foscue
> *Sent:* Saturday, 10 April 2021 11:23 AM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* RE: Cutting threads in wood w/router bit
>
>
>
> Bill,
>
> Thanks.
>
> Wouldn't you use the same bit for both internal AND external threads (nut
> and "screw/bolt")?
>
> Mac
> --
>
> -Original Message-
> From: bulke...@mmnet.com.au
> Sent: Apr 9, 2021 5:54 PM
> To: legacy-ornamental-mills@googlegroups.com
> Subject: RE: Cutting threads in wood w/router bit
>
>
> Yep that’s the cutter for internal wood threads 60 degrees for metal
> 90degrees for wood yes it’s the angle of the valley as you say.
>
>
>
> 90 is the traditional angle but some others do 60
>
>
>
> Bill
> --
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *M.W.Foscue
> *Sent:* Saturday, 10 April 2021 12:24 AM
> *To:* LOM Group 
> *Subject:* Cutting threads in wood w/router bit
>
>
>
> Hi ya'll,
>
>
>
> New Topic here:
>
>
>
> The below link is to a router bit sold by Magnate.
>
> It is described as one for cutting threads in wood - with a 90º angle.
>
> Bill, you (and maybe others) discussed the angle of the "the valley" the
> cutter makes - that it is different for metal vs wood.
>
> Is it also different for hard woods vs soft woods?
>
>
>
> Has anyone used the below Magnate bit to make threads?
>
>
>
> https://www.ebay.com/itm/153156308964?ul_noapp=true
>
>
>
> Have a Safe & Fun-filled weekend!
>
> Mac
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental

RE: Cutting threads in wood w/router bit

2021-04-10 Thread bulkeley

Not an acme thread no.
Because wood is not as strong as metal and prone to chipping and tearing 
especially at the point of the thread, traditionally wood threads where the 
blunter  45 degrees to help with this its just People have gotten lazy over the 
years and are ignoring the correct angle that wood threads should be. I believe 
if you look it up in the  Diderot Encyclopedia it is explained there its been a 
long time for me but I learnt it when I was an apprentice many years ago. 
Magnate even mentions it a little with their very tool
https://www.magnate.net/SearchResults.asp?Cat=230811


Bill


-Original Message-
From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of anthony
Sent: Saturday, 10 April 2021 2:59 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Cutting threads in wood w/router bit

Are you talking about an ACME thread; where the profile of the thread is square?
A lot of standard threads are cut in wood.  Sixty degrees, isn't it?


To forgive is to set a prisoner free and discover that the prisoner was you.
.
-Original Message- 
From: M.W.Foscue
Sent: Friday, April 09, 2021 9:23 AM
To: LOM Group
Subject: Cutting threads in wood w/router bit


Hi ya'll,

New Topic here:

The below link is to a router bit sold by Magnate.
It is described as one for cutting threads in wood - with a 90º angle.
Bill, you (and maybe others) discussed the angle of the "the valley" the 
cutter makes - that it is different for metal vs wood.
Is it also different for hard woods vs soft woods?

Has anyone used the below Magnate bit to make threads?

https://www.ebay.com/itm/153156308964?ul_noapp=true

Have a Safe & Fun-filled weekend!
Mac




-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an 
email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/523397271.1747.1617978217174%40wamui-bison.atl.sa.earthlink.net.
 

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/8F822B69E38841A1B43FAD3BA37EE3EC%40acmePC.

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/000e01d72dd2%24033cfe70%2409b6fb50%24%40mmnet.com.au.

RE: Cutting threads in wood w/router bit

2021-04-09 Thread bulkeley

Possibly I have done extensive metal threading with a boring bar in my 
engineering days but at the slow feeds of threading with a boring bare in the 
legacy the wood has a terrible chance of tearing really bad I don’t say its 
impossible, I could do something on the metal lathe but this is about doing it 
on the legacy go try it you might get it to work. soaking the wood in oil for a 
few days would defiantly help with this but after you would never get any 
finish but an oil to adhere to the wood.

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of Tim Ziegler
Sent: Saturday, 10 April 2021 1:17 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Cutting threads in wood w/router bit

 

So what about boring bars Bill? My brother does metal work and I've watched

him use a boring bar for threading deeper?




Kind Regards,

 

Timothy J. Ziegler

Ziegler WoodWork & Specialty

14171 160th Ave.

Foreston MN 56330

 

320-294-5798 shop

320-630-2243 cell

 

 

On Fri, Apr 9, 2021 at 9:39 PM mailto:bulke...@mmnet.com.au> > wrote:

The nut actually only has 3 ¼  inches of thread the absolute limit of thread it 
will cut, adding a ¼ chamfer each end gave me an extra ½ inch longer nut 
length. if I needed longer I would make several 3 inch threaded sleeves and 
glue them in the inside to make a longer threaded bore.

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
<mailto:legacy-ornamental-mills@googlegroups.com>  
mailto:legacy-ornamental-mills@googlegroups.com> > On Behalf Of M.W.Foscue
Sent: Saturday, 10 April 2021 12:16 PM
To: legacy-ornamental-mills@googlegroups.com 
<mailto:legacy-ornamental-mills@googlegroups.com> 
Subject: RE: Cutting threads in wood w/router bit

 

Ok - I got it.

So - how did you get a nut ~6" deep threaded?   Go 3" in  - then turn the nut 
around and cut threads from the inside to the outside?

Mac


  _  


-Original Message- 
From: bulke...@mmnet.com.au <mailto:bulke...@mmnet.com.au>  
Sent: Apr 9, 2021 10:10 PM 
To: legacy-ornamental-mills@googlegroups.com 
<mailto:legacy-ornamental-mills@googlegroups.com>  
Subject: RE: Cutting threads in wood w/router bit 



No because the bolt is longer than the router bit, the internal threading bit 
can only do about 3 inches of thread where the bolt is like 16 inches long

 

Bill


  _  


From: legacy-ornamental-mills@googlegroups.com 
<mailto:legacy-ornamental-mills@googlegroups.com>  
mailto:legacy-ornamental-mills@googlegroups.com> > On Behalf Of M.W.Foscue
Sent: Saturday, 10 April 2021 11:23 AM
To: legacy-ornamental-mills@googlegroups.com 
<mailto:legacy-ornamental-mills@googlegroups.com> 
Subject: RE: Cutting threads in wood w/router bit

 

Bill,

Thanks.

Wouldn't you use the same bit for both internal AND external threads (nut and 
"screw/bolt")?

Mac


  _  


-Original Message- 
From: bulke...@mmnet.com.au <mailto:bulke...@mmnet.com.au>  
Sent: Apr 9, 2021 5:54 PM 
To: legacy-ornamental-mills@googlegroups.com 
<mailto:legacy-ornamental-mills@googlegroups.com>  
Subject: RE: Cutting threads in wood w/router bit 




Yep that’s the cutter for internal wood threads 60 degrees for metal 90degrees 
for wood yes it’s the angle of the valley as you say.

 

90 is the traditional angle but some others do 60

 

Bill


  _  


From: legacy-ornamental-mills@googlegroups.com 
<mailto:legacy-ornamental-mills@googlegroups.com>  
mailto:legacy-ornamental-mills@googlegroups.com> > On Behalf Of M.W.Foscue
Sent: Saturday, 10 April 2021 12:24 AM
To: LOM Group mailto:legacy-ornamental-mills@googlegroups.com> >
Subject: Cutting threads in wood w/router bit

 

Hi ya'll,

 

New Topic here:

 

The below link is to a router bit sold by Magnate.

It is described as one for cutting threads in wood - with a 90º angle.

Bill, you (and maybe others) discussed the angle of the "the valley" the cutter 
makes - that it is different for metal vs wood.

Is it also different for hard woods vs soft woods?

 

Has anyone used the below Magnate bit to make threads?

 

https://www.ebay.com/itm/153156308964?ul_noapp=true

 

Have a Safe & Fun-filled weekend!

Mac

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
<mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/689156921.8583.1618020947925%40wamui-bison.atl.sa.earthlink.net
 
<https://groups.google.com/d/msgid/legacy-ornamental-mills/689156921.8583.1618020947925%40wamui-bison.atl.sa.earthlink.net?utm_medium=email_source=footer>
 .

-- 
You received this message because you are s

Re: Cutting threads in wood w/router bit

2021-04-09 Thread anthony

Are you talking about an ACME thread; where the profile of the thread is 
square?

A lot of standard threads are cut in wood.  Sixty degrees, isn't it?


To forgive is to set a prisoner free and discover that the prisoner was you.
.
-Original Message- 
From: M.W.Foscue

Sent: Friday, April 09, 2021 9:23 AM
To: LOM Group
Subject: Cutting threads in wood w/router bit


Hi ya'll,

New Topic here:

The below link is to a router bit sold by Magnate.
It is described as one for cutting threads in wood - with a 90º angle.
Bill, you (and maybe others) discussed the angle of the "the valley" the 
cutter makes - that it is different for metal vs wood.

Is it also different for hard woods vs soft woods?

Has anyone used the below Magnate bit to make threads?

https://www.ebay.com/itm/153156308964?ul_noapp=true

Have a Safe & Fun-filled weekend!
Mac




--
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an 
email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/523397271.1747.1617978217174%40wamui-bison.atl.sa.earthlink.net. 


--
You received this message because you are subscribed to the Google Groups "Legacy 
Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/8F822B69E38841A1B43FAD3BA37EE3EC%40acmePC.

Re: Cutting threads in wood w/router bit

2021-04-09 Thread Tim Ziegler

So what about boring bars Bill? My brother does metal work and I've watched
him use a boring bar for threading deeper?

Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Fri, Apr 9, 2021 at 9:39 PM  wrote:

> The nut actually only has 3 ¼  inches of thread the absolute limit of
> thread it will cut, adding a ¼ chamfer each end gave me an extra ½ inch
> longer nut length. if I needed longer I would make several 3 inch threaded
> sleeves and glue them in the inside to make a longer threaded bore.
>
>
>
> Bill
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *M.W.Foscue
> *Sent:* Saturday, 10 April 2021 12:16 PM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* RE: Cutting threads in wood w/router bit
>
>
>
> Ok - I got it.
>
> So - how did you get a nut ~6" deep threaded?   Go 3" in  - then turn the
> nut around and cut threads from the inside to the outside?
>
> Mac
> --
>
> -Original Message-
> From: bulke...@mmnet.com.au
> Sent: Apr 9, 2021 10:10 PM
> To: legacy-ornamental-mills@googlegroups.com
> Subject: RE: Cutting threads in wood w/router bit
>
>
> No because the bolt is longer than the router bit, the internal threading
> bit can only do about 3 inches of thread where the bolt is like 16 inches
> long
>
>
>
> Bill
> --
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *M.W.Foscue
> *Sent:* Saturday, 10 April 2021 11:23 AM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* RE: Cutting threads in wood w/router bit
>
>
>
> Bill,
>
> Thanks.
>
> Wouldn't you use the same bit for both internal AND external threads (nut
> and "screw/bolt")?
>
> Mac
> --
>
> -Original Message-
> From: bulke...@mmnet.com.au
> Sent: Apr 9, 2021 5:54 PM
> To: legacy-ornamental-mills@googlegroups.com
> Subject: RE: Cutting threads in wood w/router bit
>
>
>
> Yep that’s the cutter for internal wood threads 60 degrees for metal
> 90degrees for wood yes it’s the angle of the valley as you say.
>
>
>
> 90 is the traditional angle but some others do 60
>
>
>
> Bill
> --
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *M.W.Foscue
> *Sent:* Saturday, 10 April 2021 12:24 AM
> *To:* LOM Group 
> *Subject:* Cutting threads in wood w/router bit
>
>
>
> Hi ya'll,
>
>
>
> New Topic here:
>
>
>
> The below link is to a router bit sold by Magnate.
>
> It is described as one for cutting threads in wood - with a 90º angle.
>
> Bill, you (and maybe others) discussed the angle of the "the valley" the
> cutter makes - that it is different for metal vs wood.
>
> Is it also different for hard woods vs soft woods?
>
>
>
> Has anyone used the below Magnate bit to make threads?
>
>
>
> https://www.ebay.com/itm/153156308964?ul_noapp=true
>
>
>
> Have a Safe & Fun-filled weekend!
>
> Mac
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/689156921.8583.1618020947925%40wamui-bison.atl.sa.earthlink.net
> <https://groups.google.com/d/msgid/legacy-ornamental-mills/689156921.8583.1618020947925%40wamui-bison.atl.sa.earthlink.net?utm_medium=email_source=footer>
> .
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/01d72db2%24af6c54e0%240e44fea0%24%40mmnet.com.au
> <https://groups.google.com/d/msgid/legacy-ornamental-mills/01d72db2%24af6c54e0%240e44fea0%24%40mmnet.com.au?utm_medium=email_source=footer>
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLFrg%3DGg2KkUHDdO6F7rMDc104puBZJADxvuWhM%3Dj7Ra6Q%40mail.gmail.com.

RE: Cutting threads in wood w/router bit

2021-04-09 Thread bulkeley

The nut actually only has 3 ¼  inches of thread the absolute limit of thread it 
will cut, adding a ¼ chamfer each end gave me an extra ½ inch longer nut 
length. if I needed longer I would make several 3 inch threaded sleeves and 
glue them in the inside to make a longer threaded bore.

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of M.W.Foscue
Sent: Saturday, 10 April 2021 12:16 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: RE: Cutting threads in wood w/router bit

 

Ok - I got it.

So - how did you get a nut ~6" deep threaded?   Go 3" in  - then turn the nut 
around and cut threads from the inside to the outside?

Mac

  _  

-Original Message- 
From: bulke...@mmnet.com.au <mailto:bulke...@mmnet.com.au>  
Sent: Apr 9, 2021 10:10 PM 
To: legacy-ornamental-mills@googlegroups.com 
<mailto:legacy-ornamental-mills@googlegroups.com>  
Subject: RE: Cutting threads in wood w/router bit 




No because the bolt is longer than the router bit, the internal threading bit 
can only do about 3 inches of thread where the bolt is like 16 inches long

 

Bill


  _  


From: legacy-ornamental-mills@googlegroups.com 
<mailto:legacy-ornamental-mills@googlegroups.com>  
mailto:legacy-ornamental-mills@googlegroups.com> > On Behalf Of M.W.Foscue
Sent: Saturday, 10 April 2021 11:23 AM
To: legacy-ornamental-mills@googlegroups.com 
<mailto:legacy-ornamental-mills@googlegroups.com> 
Subject: RE: Cutting threads in wood w/router bit

 

Bill,

Thanks.

Wouldn't you use the same bit for both internal AND external threads (nut and 
"screw/bolt")?

Mac


  _  


-Original Message- 
From: bulke...@mmnet.com.au <mailto:bulke...@mmnet.com.au>  
Sent: Apr 9, 2021 5:54 PM 
To: legacy-ornamental-mills@googlegroups.com 
<mailto:legacy-ornamental-mills@googlegroups.com>  
Subject: RE: Cutting threads in wood w/router bit 





Yep that’s the cutter for internal wood threads 60 degrees for metal 90degrees 
for wood yes it’s the angle of the valley as you say.

 

90 is the traditional angle but some others do 60

 

Bill


  _  


From: legacy-ornamental-mills@googlegroups.com 
mailto:legacy-ornamental-mills@googlegroups.com> > On Behalf Of M.W.Foscue
Sent: Saturday, 10 April 2021 12:24 AM
To: LOM Group mailto:legacy-ornamental-mills@googlegroups.com> >
Subject: Cutting threads in wood w/router bit

 

Hi ya'll,

 

New Topic here:

 

The below link is to a router bit sold by Magnate.

It is described as one for cutting threads in wood - with a 90º angle.

Bill, you (and maybe others) discussed the angle of the "the valley" the cutter 
makes - that it is different for metal vs wood.

Is it also different for hard woods vs soft woods?

 

Has anyone used the below Magnate bit to make threads?

 

https://www.ebay.com/itm/153156308964?ul_noapp=true

 

Have a Safe & Fun-filled weekend!

Mac

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
<mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/689156921.8583.1618020947925%40wamui-bison.atl.sa.earthlink.net
 
<https://groups.google.com/d/msgid/legacy-ornamental-mills/689156921.8583.1618020947925%40wamui-bison.atl.sa.earthlink.net?utm_medium=email_source=footer>
 .

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/01d72db2%24af6c54e0%240e44fea0%24%40mmnet.com.au.

RE: Cutting threads in wood w/router bit

2021-04-09 Thread M.W.Foscue

Ok - I got it.So - how did you get a nut ~6" deep threaded?   Go 3" in  - then turn the nut around and cut threads from the inside to the outside?Mac-Original Message-
From: bulke...@mmnet.com.au
Sent: Apr 9, 2021 10:10 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: RE: Cutting threads in wood w/router bit

No because the bolt is longer than the router bit, the internal threading bit can only do about 3 inches of thread where the bolt is like 16 inches long BillFrom: legacy-ornamental-mills@googlegroups.com  On Behalf Of M.W.FoscueSent: Saturday, 10 April 2021 11:23 AMTo: legacy-ornamental-mills@googlegroups.comSubject: RE: Cutting threads in wood w/router bit Bill,Thanks.Wouldn't you use the same bit for both internal AND external threads (nut and "screw/bolt")?Mac-Original Message- From: bulke...@mmnet.com.au Sent: Apr 9, 2021 5:54 PM To: legacy-ornamental-mills@googlegroups.com Subject: RE: Cutting threads in wood w/router bit Yep that’s the cutter for internal wood threads 60 degrees for metal 90degrees for wood yes it’s the angle of the valley as you say. 90 is the traditional angle but some others do 60 BillFrom: legacy-ornamental-mills@googlegroups.com <legacy-ornamental-mills@googlegroups.com> On Behalf Of M.W.FoscueSent: Saturday, 10 April 2021 12:24 AMTo: LOM Group <legacy-ornamental-mills@googlegroups.com>Subject: Cutting threads in wood w/router bit Hi ya'll, New Topic here: The below link is to a router bit sold by Magnate.It is described as one for cutting threads in wood - with a 90º angle.Bill, you (and maybe others) discussed the angle of the "the valley" the cutter makes - that it is different for metal vs wood.Is it also different for hard woods vs soft woods? Has anyone used the below Magnate bit to make threads? https://www.ebay.com/itm/153156308964?ul_noapp=true Have a Safe & Fun-filled weekend!Mac




-- 
You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/689156921.8583.1618020947925%40wamui-bison.atl.sa.earthlink.net.

RE: Cutting threads in wood w/router bit

2021-04-09 Thread bulkeley

No because the bolt is longer than the router bit, the internal threading bit 
can only do about 3 inches of thread where the bolt is like 16 inches long

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of M.W.Foscue
Sent: Saturday, 10 April 2021 11:23 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: RE: Cutting threads in wood w/router bit

 

Bill,

Thanks.

Wouldn't you use the same bit for both internal AND external threads (nut and 
"screw/bolt")?

Mac

  _  

-Original Message- 
From: bulke...@mmnet.com.au <mailto:bulke...@mmnet.com.au>  
Sent: Apr 9, 2021 5:54 PM 
To: legacy-ornamental-mills@googlegroups.com 
<mailto:legacy-ornamental-mills@googlegroups.com>  
Subject: RE: Cutting threads in wood w/router bit 




Yep that’s the cutter for internal wood threads 60 degrees for metal 90degrees 
for wood yes it’s the angle of the valley as you say.

 

90 is the traditional angle but some others do 60

 

Bill


  _  


From: legacy-ornamental-mills@googlegroups.com 
<mailto:legacy-ornamental-mills@googlegroups.com>  
mailto:legacy-ornamental-mills@googlegroups.com> > On Behalf Of M.W.Foscue
Sent: Saturday, 10 April 2021 12:24 AM
To: LOM Group mailto:legacy-ornamental-mills@googlegroups.com> >
Subject: Cutting threads in wood w/router bit

 

Hi ya'll,

 

New Topic here:

 

The below link is to a router bit sold by Magnate.

It is described as one for cutting threads in wood - with a 90º angle.

Bill, you (and maybe others) discussed the angle of the "the valley" the cutter 
makes - that it is different for metal vs wood.

Is it also different for hard woods vs soft woods?

 

Has anyone used the below Magnate bit to make threads?

 

https://www.ebay.com/itm/153156308964?ul_noapp=true

 

Have a Safe & Fun-filled weekend!

Mac

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
<mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/1012042192.8366.1618017808889%40wamui-bison.atl.sa.earthlink.net
 
<https://groups.google.com/d/msgid/legacy-ornamental-mills/1012042192.8366.1618017808889%40wamui-bison.atl.sa.earthlink.net?utm_medium=email_source=footer>
 .

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/01d72dae%24b743c3f0%2425cb4bd0%24%40mmnet.com.au.

RE: Cutting threads in wood w/router bit

2021-04-09 Thread M.W.Foscue

Bill,Thanks.Wouldn't you use the same bit for both internal AND external threads (nut and "screw/bolt")?Mac-Original Message-
From: bulke...@mmnet.com.au
Sent: Apr 9, 2021 5:54 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: RE: Cutting threads in wood w/router bit

Yep that’s the cutter for internal wood threads 60 degrees for metal 90degrees for wood yes it’s the angle of the valley as you say. 90 is the traditional angle but some others do 60 BillFrom: legacy-ornamental-mills@googlegroups.com  On Behalf Of M.W.FoscueSent: Saturday, 10 April 2021 12:24 AMTo: LOM Group Subject: Cutting threads in wood w/router bit Hi ya'll, New Topic here: The below link is to a router bit sold by Magnate.It is described as one for cutting threads in wood - with a 90º angle.Bill, you (and maybe others) discussed the angle of the "the valley" the cutter makes - that it is different for metal vs wood.Is it also different for hard woods vs soft woods? Has anyone used the below Magnate bit to make threads? https://www.ebay.com/itm/153156308964?ul_noapp=true Have a Safe & Fun-filled weekend!Mac



-- 
You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/1012042192.8366.1618017808889%40wamui-bison.atl.sa.earthlink.net.

RE: Cutting threads in wood w/router bit

2021-04-09 Thread bulkeley

Ps yes same angle soft or hard woods some woods you might have to coat in ca 
glues to reduce chipping 

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of M.W.Foscue
Sent: Saturday, 10 April 2021 12:24 AM
To: LOM Group 
Subject: Cutting threads in wood w/router bit

 

Hi ya'll,

 

New Topic here:

 

The below link is to a router bit sold by Magnate.

It is described as one for cutting threads in wood - with a 90º angle.

Bill, you (and maybe others) discussed the angle of the "the valley" the cutter 
makes - that it is different for metal vs wood.

Is it also different for hard woods vs soft woods?

 

Has anyone used the below Magnate bit to make threads?

 

https://www.ebay.com/itm/153156308964?ul_noapp=true

 

Have a Safe & Fun-filled weekend!

Mac

  _  

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
 .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/523397271.1747.1617978217174%40wamui-bison.atl.sa.earthlink.net
 

 .

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/002201d72d8b%246af341b0%2440d9c510%24%40mmnet.com.au.

RE: Cutting threads in wood w/router bit

2021-04-09 Thread bulkeley

Yep that’s the cutter for internal wood threads 60 degrees for metal 90degrees 
for wood yes it’s the angle of the valley as you say.

 

90 is the traditional angle but some others do 60

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of M.W.Foscue
Sent: Saturday, 10 April 2021 12:24 AM
To: LOM Group 
Subject: Cutting threads in wood w/router bit

 

Hi ya'll,

 

New Topic here:

 

The below link is to a router bit sold by Magnate.

It is described as one for cutting threads in wood - with a 90º angle.

Bill, you (and maybe others) discussed the angle of the "the valley" the cutter 
makes - that it is different for metal vs wood.

Is it also different for hard woods vs soft woods?

 

Has anyone used the below Magnate bit to make threads?

 

https://www.ebay.com/itm/153156308964?ul_noapp=true

 

Have a Safe & Fun-filled weekend!

Mac

  _  

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
 .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/523397271.1747.1617978217174%40wamui-bison.atl.sa.earthlink.net
 

 .

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/001d01d72d8a%24e4b123b0%24ae136b10%24%40mmnet.com.au.

Re: Cutting threads in wood w/router bit

2021-04-09 Thread Tim Ziegler

Hey Mac,
Already have the boat battery charged lol . no grass growing under my feet.
lol
Yea I guess I should try playing around, but better get Momma's light up
first right.
Now you have my wheels turning.
Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Fri, Apr 9, 2021 at 1:48 PM M.W.Foscue  wrote:

> Tim,
> I figured you are *very ready* to start turning boxes with lids that
> screw on/off - and have a rosette embellishing the top of the screw-on
> lid!!  LoL!!
> Have a Great weekend - and stay off the ice!   Spring WILL come to
> Min-e-soda; someday!!
> Mac
> --
> --
>
> -Original Message-
> From: Tim Ziegler
> Sent: Apr 9, 2021 1:29 PM
> To: legacy-ornamental-mills@googlegroups.com
> Subject: Re: Cutting threads in wood w/router bit
>
> Dont' know if I'm ready for threads yet. I need to get the rosettes
> mastered. lol
> Thanks for sharing that Mac.
>
> Kind Regards,
>
> Timothy J. Ziegler
> --
> On Fri, Apr 9, 2021 at 9:23 AM M.W.Foscue  wrote:
>
>> Hi ya'll,
>>
>> New Topic here:
>>
>> The below link is to a router bit sold by Magnate.
>> It is described as one for cutting threads in wood - with a 90º angle.
>> Bill, you (and maybe others) discussed the angle of the "the valley" the
>> cutter makes - that it is different for metal vs wood.
>> Is it also different for hard woods vs soft woods?
>>
>> Has anyone used the below Magnate bit to make threads?
>>
>> https://www.ebay.com/itm/153156308964?ul_noapp=true
>>
>> Have a Safe & Fun-filled weekend!
>> Mac
>>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/624624335.4915.1617994127815%40wamui-bison.atl.sa.earthlink.net
> <https://groups.google.com/d/msgid/legacy-ornamental-mills/624624335.4915.1617994127815%40wamui-bison.atl.sa.earthlink.net?utm_medium=email_source=footer>
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLGQ1NDsAqutOOCdfennj_qa_aaa_r%2BHNR%2BmZBJBWAobWg%40mail.gmail.com.

Re: Cutting threads in wood w/router bit

2021-04-09 Thread M.W.Foscue

Tim,I figured you are very ready to start turning boxes with lids that screw on/off - and have a rosette embellishing the top of the screw-on lid!!  LoL!!Have a Great weekend - and stay off the ice!   Spring WILL come to Min-e-soda; someday!!Mac-Original Message-
From: Tim Ziegler 
Sent: Apr 9, 2021 1:29 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Cutting threads in wood w/router bit

Dont' know if I'm ready for threads yet. I need to get the rosettes mastered. lolThanks for sharing that Mac.Kind Regards,Timothy J. ZieglerOn Fri, Apr 9, 2021 at 9:23 AM M.W.Foscue <mwfos...@earthlink.net> wrote:Hi ya'll,New Topic here:The below link is to a router bit sold by Magnate.It is described as one for cutting threads in wood - with a 90º angle.Bill, you (and maybe others) discussed the angle of the "the valley" the cutter makes - that it is different for metal vs wood.Is it also different for hard woods vs soft woods?Has anyone used the below Magnate bit to make threads?https://www.ebay.com/itm/153156308964?ul_noapp=trueHave a Safe & Fun-filled weekend!Mac

-- 
You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/624624335.4915.1617994127815%40wamui-bison.atl.sa.earthlink.net.

Re: Cutting threads in wood w/router bit

2021-04-09 Thread Tim Ziegler

Dont' know if I'm ready for threads yet. I need to get the rosettes
mastered. lol
Thanks for sharing that Mac.

Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Fri, Apr 9, 2021 at 9:23 AM M.W.Foscue  wrote:

> Hi ya'll,
>
> New Topic here:
>
> The below link is to a router bit sold by Magnate.
> It is described as one for cutting threads in wood - with a 90º angle.
> Bill, you (and maybe others) discussed the angle of the "the valley" the
> cutter makes - that it is different for metal vs wood.
> Is it also different for hard woods vs soft woods?
>
> Has anyone used the below Magnate bit to make threads?
>
> https://www.ebay.com/itm/153156308964?ul_noapp=true
>
> Have a Safe & Fun-filled weekend!
> Mac
> --
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/523397271.1747.1617978217174%40wamui-bison.atl.sa.earthlink.net
> 
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLEQx-oYaCC2eTep1wn_TJpHZNHULAm6RdLuFMk2YiRtxw%40mail.gmail.com.

Re: Cutting threads in wood w/router bit

RE: Cutting threads in wood w/router bit

Re: Cutting threads in wood w/router bit

Re: Cutting threads in wood w/router bit

RE: Cutting threads in wood w/router bit

RE: Cutting threads in wood w/router bit

Re: Cutting threads in wood w/router bit

Re: Cutting threads in wood w/router bit

RE: Cutting threads in wood w/router bit

RE: Cutting threads in wood w/router bit

RE: Cutting threads in wood w/router bit

RE: Cutting threads in wood w/router bit

RE: Cutting threads in wood w/router bit

RE: Cutting threads in wood w/router bit

Re: Cutting threads in wood w/router bit

Re: Cutting threads in wood w/router bit

Re: Cutting threads in wood w/router bit

17 matches

Site Navigation

Mail list logo

Footer information