RE: Dusty Dave's Legacy

2020-06-29 Thread artmarbles 
Hi Mac,

 

I made those legs, they came with two rods that support the inner rails while 
adjusting the bed height.  You just insert the rod in the front hole of choice 
and slide it in the back hole.  Do this for both sides, loosen the bed rails, 
drop the bed on the supports and tighten all the screws for the bed.  This 
works for repeatable heights and tapers on the 900. There is no need for 
measuring the four  corners.  The legs where the next generation of my bed 
height tool. 

 

There is also a uninstalled x-axis lock.  It’s a faster way to lock the 
carriage in place so you can make a y-axis cut.  

 

I think you got the index number of rings correct.  I don’t remember the 
numbers.  There is a lock that you push down then rotate the table to the next 
index.  It was a well thought ought build, but it was very expensive to put it 
together.  Also it was made when the table had been discontinued. 

 

Tim

 

PS: My availability at the moment is really inconsistent due to a changeable 
schedule. 

 

From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of M.W.Foscue
Sent: Sunday, June 28, 2020 6:53 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Dusty Dave's Legacy

 

Curt,

Are you saying the dark gray (or black) "legs" we see in the 4 corners are not 
"Legacy legs"; rather ones made by Tim?

I notice the legs have a hole pattern in the leg - vs the step notches that I 
see in most Legacy Mills. There are several models of the LOM that also had 
holes instead of the step notches - but they all had red legs.  Perhaps you 
know which models those were and when the LOMs were made that way and then what 
year Legacy switched over to the step notches.

Mac

  _  

  _  

-Original Message- 
From: 'Curt George' via Legacy Ornamental Mills 
Sent: Jun 28, 2020 3:24 PM 
To: legacy-ornamental-mills@googlegroups.com 
<mailto:legacy-ornamental-mills@googlegroups.com>  
Subject: Re: Dusty Dave's Legacy 

I found my self thinking that I should buy it...  Something I just can do.  But 
as I said its one very nice machine.  some more details that I did not talk 
about are, The TK riser legs are the biggest ones the Tim ever made. giving you 
a lot more room for table attachments.  The TK quick change gear changer (I 
also one one, Awesome tool.)  For $900.00 depending on the bidding, this Legacy 
is one of the best that Ive seen. 

 

C.A.G. 


  _  


  _  


On Sunday, June 28, 2020, 01:10:29 PM EDT, mailto:bulke...@mmnet.com.au> > wrote: 

 

 

That is a really good deal curt 

 

Bill


  _  


  _  


 

From: 'Curt George' via Legacy Ornamental Mills 
mailto:legacy-ornamental-mills@googlegroups.com> > 
Sent: Monday, 29 June 2020 12:02 AM
To: Legacy ornamental mills mailto:legacy-ornamental-mills@googlegroups.com> >
Subject: Dusty Dave's Legacy

 

https://www.ebay.com/itm/133450803295?ul_noapp=true  

 

Hello Everyone, Here is the E-bay sale of Dave's Legacy,   

Its a Very Nice machine, Z axis, both motor drive and spindle motor,

The T.K. Quick change directional gear. Plus a lot more...

 

Check it out.

 

C.A.G.



-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
<mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/313979800.4967.1593395573377%40wamui-napoleon.atl.sa.earthlink.net
 
<https://groups.google.com/d/msgid/legacy-ornamental-mills/313979800.4967.1593395573377%40wamui-napoleon.atl.sa.earthlink.net?utm_medium=email_source=footer>
 .

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/01ab01d64e91%24b5decbb0%24219c6310%24%40comcast.net.

Re: Dusty Dave's Legacy

2020-06-28 Thread 'Curt George' via Legacy Ornamental Mills 
 Mac.sorry I missed your question.   The older 1000 ex. and 1800's had the 
holes in the legs for height adjustment.  (the same as my  unit has.) When 
Legacy started laser cutting there own part, is when the stair step design 
started. ( I am sorry, I am very bad with time,as far as date go. but its safe 
to state if there are holes for adjustment in the legs of the machine, they are 
either old Legacy (red) or A TK height adjustment parts.)
C.A.G.
On Sunday, June 28, 2020, 11:34:51 PM EDT, Curt George 
 wrote:  
 
  Yes.those legs with the holes are ones that Tim made. they are longer then 
most, due to Dave's needs to turn/work with a 6" piece of wood on both the 
rotary and flat bed table ,for a project he was doing. On a normal Legacy this 
could not be done, so Tim made the Longer legs for his mill.
As I said Dave's mill has it all, both the motor for the drive and spindle, Z 
axis, The quick change directional gear set.  Dave's mill was the newer with 
the ball bearings on the acme screw.  It was the best that Legacy ever made, 
and then Tim helped Dave to make it even better.Someone is going to buy a VERY 
Nice machine!
C.A.G.
On Sunday, June 28, 2020, 09:52:55 PM EDT, M.W.Foscue 
 wrote:  
 
 #yiv7336225845 -- DIV {margin:0px;}#yiv7336225845 Curt,Are you saying the dark 
gray (or black) "legs" we see in the 4 corners are not "Legacy legs"; rather 
ones made by Tim?I notice the legs have a hole pattern in the leg - vs the step 
notches that I see in most Legacy Mills. There are several models of the LOM 
that also had holes instead of the step notches - but they all had red legs.  
Perhaps you know which models those were and when the LOMs were made that way 
and then what year Legacy switched over to the step notches.Mac

-Original Message-
From: 'Curt George' via Legacy Ornamental Mills 
Sent: Jun 28, 2020 3:24 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Dusty Dave's Legacy

 I found my self thinking that I should buy it...  Something I just can do.  
But as I said its one very nice machine.  some more details that I did not talk 
about are, The TK riser legs are the biggest ones the Tim ever made. giving you 
a lot more room for table attachments.  The TK quick change gear changer (I 
also one one, Awesome tool.)  For $900.00 depending on the bidding, this Legacy 
is one of the best that Ive seen. 
C.A.G. On Sunday, June 28, 2020, 01:10:29 PM EDT,  
wrote:  
 
 #yiv7336225845 -- filtered {}#yiv7336225845 filtered {}#yiv7336225845 filtered 
{}#yiv7336225845 p.yiv7336225845MsoNormal, #yiv7336225845 
li.yiv7336225845MsoNormal, #yiv7336225845 div.yiv7336225845MsoNormal 
{margin:0cm;margin-bottom:.0001pt;font-size:11.0pt;font-family:sans-serif;}#yiv7336225845
 a:link, #yiv7336225845 span.yiv7336225845MsoHyperlink 
{color:blue;text-decoration:underline;}#yiv7336225845 
span.yiv7336225845EmailStyle19 
{font-family:sans-serif;color:windowtext;}#yiv7336225845 
.yiv7336225845MsoChpDefault {font-size:10.0pt;}#yiv7336225845 filtered 
{}#yiv7336225845 div.yiv7336225845WordSection1 {}#yiv7336225845 
That is a really good deal curt 

  

Bill



  

From: 'Curt George' via Legacy Ornamental Mills 
 
Sent: Monday, 29 June 2020 12:02 AM
To: Legacy ornamental mills 
Subject: Dusty Dave's Legacy

  

https://www.ebay.com/itm/133450803295?ul_noapp=true  

  

Hello Everyone, Here is the E-bay sale of Dave's Legacy,   

Its a Very Nice machine, Z axis, both motor drive and spindle motor,

The T.K. Quick change directional gear. Plus a lot more...

  

Check it out.

  

C.A.G.




-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/313979800.4967.1593395573377%40wamui-napoleon.atl.sa.earthlink.net.


-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/2028685614.3265030.1593402146802%40mail.yahoo.com.

Re: Dusty Dave's Legacy

2020-06-28 Thread 'Curt George' via Legacy Ornamental Mills 
 Yes.those legs with the holes are ones that Tim made. they are longer then 
most, due to Dave's needs to turn/work with a 6" piece of wood on both the 
rotary and flat bed table ,for a project he was doing. On a normal Legacy this 
could not be done, so Tim made the Longer legs for his mill.
As I said Dave's mill has it all, both the motor for the drive and spindle, Z 
axis, The quick change directional gear set.  Dave's mill was the newer with 
the ball bearings on the acme screw.  It was the best that Legacy ever made, 
and then Tim helped Dave to make it even better.Someone is going to buy a VERY 
Nice machine!
C.A.G.
On Sunday, June 28, 2020, 09:52:55 PM EDT, M.W.Foscue 
 wrote:  
 
 #yiv9193428214 #yiv9193428214 -- DIV {margin:0px;}#yiv9193428214 Curt,Are you 
saying the dark gray (or black) "legs" we see in the 4 corners are not "Legacy 
legs"; rather ones made by Tim?I notice the legs have a hole pattern in the leg 
- vs the step notches that I see in most Legacy Mills. There are several models 
of the LOM that also had holes instead of the step notches - but they all had 
red legs.  Perhaps you know which models those were and when the LOMs were made 
that way and then what year Legacy switched over to the step notches.Mac

-Original Message-
From: 'Curt George' via Legacy Ornamental Mills 
Sent: Jun 28, 2020 3:24 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Dusty Dave's Legacy

 I found my self thinking that I should buy it...  Something I just can do.  
But as I said its one very nice machine.  some more details that I did not talk 
about are, The TK riser legs are the biggest ones the Tim ever made. giving you 
a lot more room for table attachments.  The TK quick change gear changer (I 
also one one, Awesome tool.)  For $900.00 depending on the bidding, this Legacy 
is one of the best that Ive seen. 
C.A.G. On Sunday, June 28, 2020, 01:10:29 PM EDT,  
wrote:  
 
 #yiv9193428214 -- filtered {}#yiv9193428214 filtered {}#yiv9193428214 filtered 
{}#yiv9193428214 p.yiv9193428214MsoNormal, #yiv9193428214 
li.yiv9193428214MsoNormal, #yiv9193428214 div.yiv9193428214MsoNormal 
{margin:0cm;margin-bottom:.0001pt;font-size:11.0pt;font-family:sans-serif;}#yiv9193428214
 a:link, #yiv9193428214 span.yiv9193428214MsoHyperlink 
{color:blue;text-decoration:underline;}#yiv9193428214 
span.yiv9193428214EmailStyle19 
{font-family:sans-serif;color:windowtext;}#yiv9193428214 
.yiv9193428214MsoChpDefault {font-size:10.0pt;}#yiv9193428214 filtered 
{}#yiv9193428214 div.yiv9193428214WordSection1 {}#yiv9193428214 
That is a really good deal curt 

  

Bill



  

From: 'Curt George' via Legacy Ornamental Mills 
 
Sent: Monday, 29 June 2020 12:02 AM
To: Legacy ornamental mills 
Subject: Dusty Dave's Legacy

  

https://www.ebay.com/itm/133450803295?ul_noapp=true  

  

Hello Everyone, Here is the E-bay sale of Dave's Legacy,   

Its a Very Nice machine, Z axis, both motor drive and spindle motor,

The T.K. Quick change directional gear. Plus a lot more...

  

Check it out.

  

C.A.G.




-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/313979800.4967.1593395573377%40wamui-napoleon.atl.sa.earthlink.net.
  

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/1749688064.3577219.1593401691081%40mail.yahoo.com.

Re: Dusty Dave's Legacy

2020-06-28 Thread M.W.Foscue 
Curt,Are you saying the dark gray (or black) "legs" we see in the 4 corners are not "Legacy legs"; rather ones made by Tim?I notice the legs have a hole pattern in the leg - vs the step notches that I see in most Legacy Mills. There are several models of the LOM that also had holes instead of the step notches - but they all had red legs.  Perhaps you know which models those were and when the LOMs were made that way and then what year Legacy switched over to the step notches.Mac-Original Message-
From: 'Curt George' via Legacy Ornamental Mills 
Sent: Jun 28, 2020 3:24 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Dusty Dave's Legacy


I found my self thinking that I should buy it...  Something I just can do.  But as I said its one very nice machine.  some more details that I did not talk about are, The TK riser legs are the biggest ones the Tim ever made. giving you a lot more room for table attachments.  The TK quick change gear changer (I also one one, Awesome tool.)  For $900.00 depending on the bidding, this Legacy is one of the best that Ive seen. C.A.G. 





On Sunday, June 28, 2020, 01:10:29 PM EDT,   wrote:



That is a really good deal curt   Bill  From: 'Curt George' via Legacy Ornamental Mills  Sent: Monday, 29 June 2020 12:02 AMTo: Legacy ornamental mills Subject: Dusty Dave's Legacy  https://www.ebay.com/itm/133450803295?ul_noapp=true    Hello Everyone, Here is the E-bay sale of Dave's Legacy,   Its a Very Nice machine, Z axis, both motor drive and spindle motor,The T.K. Quick change directional gear. Plus a lot more...  Check it out.  C.A.G.



-- 
You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/313979800.4967.1593395573377%40wamui-napoleon.atl.sa.earthlink.net.

RE: Dusty Dave's Legacy

2020-06-28 Thread bulkeley 
You got that right curt 

 

Bill

 

From: 'Curt George' via Legacy Ornamental Mills 
 
Sent: Monday, 29 June 2020 8:43 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Dusty Dave's Legacy

 

Bill if you were to buy it.  an airplane ticket would be needed. ;-)  better 
yet you could buy your own airplane and fly over AND pick it up  for your self, 
 for just a little bit more then it would cost to breaking it down and sending 
it to you.

;-P

 

C.A.G.

 

On Sunday, June 28, 2020, 06:35:29 PM EDT, mailto:bulke...@mmnet.com.au> > wrote: 

 

 

I certainly would be bidding if the cost to get it here was not so impossibly 
high these days.

 

Bill

 

From: 'Curt George' via Legacy Ornamental Mills 
mailto:legacy-ornamental-mills@googlegroups.com> > 
Sent: Monday, 29 June 2020 5:36 AM
To: 'Curt George' via Legacy Ornamental Mills 
mailto:legacy-ornamental-mills@googlegroups.com> >
Subject: Re: Dusty Dave's Legacy

 

Woops! It should read. CAN NOT BUY! I just do not have the space, or the need. 
but the eye candy this machine is Awesome! the cabinet is very nice too. the 
hole machine shows its precision and Quality. it is the Legacy that I dreamed 
of, all those many years ago of owning. 

 

Whom ever buys this machine will be getting much more then what they pay for.

 

C.A.G.

 

On Sunday, June 28, 2020, 03:24:57 PM EDT, 'Curt George' via Legacy Ornamental 
Mills mailto:legacy-ornamental-mills@googlegroups.com> > wrote: 

 

 

I found my self thinking that I should buy it...  Something I just can do.  But 
as I said its one very nice machine.  some more details that I did not talk 
about are, The TK riser legs are the biggest ones the Tim ever made. giving you 
a lot more room for table attachments.  The TK quick change gear changer (I 
also one one, Awesome tool.)  For $900.00 depending on the bidding, this Legacy 
is one of the best that Ive seen. 

 

C.A.G. 

 

On Sunday, June 28, 2020, 01:10:29 PM EDT, mailto:bulke...@mmnet.com.au> > wrote: 

 

 

That is a really good deal curt 

 

Bill

 

From: 'Curt George' via Legacy Ornamental Mills 
mailto:legacy-ornamental-mills@googlegroups.com> > 
Sent: Monday, 29 June 2020 12:02 AM
To: Legacy ornamental mills mailto:legacy-ornamental-mills@googlegroups.com> >
Subject: Dusty Dave's Legacy

 

https://www.ebay.com/itm/133450803295?ul_noapp=true  

 

Hello Everyone, Here is the E-bay sale of Dave's Legacy,   

Its a Very Nice machine, Z axis, both motor drive and spindle motor,

The T.K. Quick change directional gear. Plus a lot more...

 

Check it out.

 

C.A.G.

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
<mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/1308365609.3414427.1593352921302%40mail.yahoo.com
 
<https://groups.google.com/d/msgid/legacy-ornamental-mills/1308365609.3414427.1593352921302%40mail.yahoo.com?utm_medium=email_source=footer>
 .

 


 
<https://www.avast.com/sig-email?utm_medium=email_source=link_campaign=sig-email_content=emailclient>
 

Virus-free.  
<https://www.avast.com/sig-email?utm_medium=email_source=link_campaign=sig-email_content=emailclient>
 www.avast.com 

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
<mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/01d64d6e%24ff312340%24fd9369c0%24%40mmnet.com.au
 
<https://groups.google.com/d/msgid/legacy-ornamental-mills/01d64d6e%24ff312340%24fd9369c0%24%40mmnet.com.au?utm_medium=email_source=footer>
 .

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
<mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/1109321658.3170073.1593372292109%40mail.yahoo.com
 
<https://groups.google.com/d/msgid/legacy-ornamental-mills/1109321658.3170073.1593372292109%40mail.yahoo.com?utm_medium=email_source=footer>
 .

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email

Re: Dusty Dave's Legacy

2020-06-28 Thread 'Curt George' via Legacy Ornamental Mills 
 Bill if you were to buy it.  an airplane ticket would be needed. ;-)  better 
yet you could buy your own airplane and fly over AND pick it up  for your self, 
 for just a little bit more then it would cost to breaking it down and sending 
it to you.;-P
C.A.G.
On Sunday, June 28, 2020, 06:35:29 PM EDT,  wrote:  
 
 #yiv5781933211 #yiv5781933211 -- _filtered {} _filtered {} _filtered 
{}#yiv5781933211 #yiv5781933211 p.yiv5781933211MsoNormal, #yiv5781933211 
li.yiv5781933211MsoNormal, #yiv5781933211 div.yiv5781933211MsoNormal 
{margin:0cm;margin-bottom:.0001pt;font-size:11.0pt;font-family:sans-serif;}#yiv5781933211
 a:link, #yiv5781933211 span.yiv5781933211MsoHyperlink 
{color:blue;text-decoration:underline;}#yiv5781933211 p.yiv5781933211msonormal, 
#yiv5781933211 li.yiv5781933211msonormal, #yiv5781933211 
div.yiv5781933211msonormal 
{margin-right:0cm;margin-left:0cm;font-size:11.0pt;font-family:sans-serif;}#yiv5781933211
 span.yiv5781933211EmailStyle29 
{font-family:sans-serif;color:windowtext;}#yiv5781933211 
.yiv5781933211MsoChpDefault {font-size:10.0pt;} _filtered {}#yiv5781933211 
div.yiv5781933211WordSection1 {}#yiv5781933211 
I certainly would be bidding if the cost to get it here was not so impossibly 
high these days.

  

Bill

  

From: 'Curt George' via Legacy Ornamental Mills 
 
Sent: Monday, 29 June 2020 5:36 AM
To: 'Curt George' via Legacy Ornamental Mills 

Subject: Re: Dusty Dave's Legacy

  

Woops! It should read. CAN NOT BUY! I just do not have the space, or the need. 
but the eye candy this machine is Awesome! the cabinet is very nice too. the 
hole machine shows its precision and Quality. it is the Legacy that I dreamed 
of, all those many years ago of owning. 

  

Whom ever buys this machine will be getting much more then what they pay for.

  

C.A.G.

  

On Sunday, June 28, 2020, 03:24:57 PM EDT, 'Curt George' via Legacy Ornamental 
Mills  wrote: 

  

  

I found my self thinking that I should buy it...  Something I just can do.  But 
as I said its one very nice machine.  some more details that I did not talk 
about are, The TK riser legs are the biggest ones the Tim ever made. giving you 
a lot more room for table attachments.  The TK quick change gear changer (I 
also one one, Awesome tool.)  For $900.00 depending on the bidding, this Legacy 
is one of the best that Ive seen. 

  

C.A.G. 

  

On Sunday, June 28, 2020, 01:10:29 PM EDT,  wrote: 

  

  

That is a really good deal curt 

 

Bill

 

From: 'Curt George' via Legacy Ornamental Mills 
 
Sent: Monday, 29 June 2020 12:02 AM
To: Legacy ornamental mills 
Subject: Dusty Dave's Legacy

 

https://www.ebay.com/itm/133450803295?ul_noapp=true  

 

Hello Everyone, Here is the E-bay sale of Dave's Legacy,   

Its a Very Nice machine, Z axis, both motor drive and spindle motor,

The T.K. Quick change directional gear. Plus a lot more...

 

Check it out.

 

C.A.G.

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/1308365609.3414427.1593352921302%40mail.yahoo.com.

  

| 

 | 
Virus-free. www.avast.com 
 |


-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/01d64d6e%24ff312340%24fd9369c0%24%40mmnet.com.au.

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/1109321658.3170073.1593372292109%40mail.yahoo.com.

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/2124645538.3489454.1593372932561%40mail.yahoo.com.


-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/001901d64d9c%246612e6c0%243238b440%24

RE: Dusty Dave's Legacy

2020-06-28 Thread bulkeley 
I certainly would be bidding if the cost to get it here was not so impossibly 
high these days.

 

Bill

 

From: 'Curt George' via Legacy Ornamental Mills 
 
Sent: Monday, 29 June 2020 5:36 AM
To: 'Curt George' via Legacy Ornamental Mills 

Subject: Re: Dusty Dave's Legacy

 

Woops! It should read. CAN NOT BUY! I just do not have the space, or the need. 
but the eye candy this machine is Awesome! the cabinet is very nice too. the 
hole machine shows its precision and Quality. it is the Legacy that I dreamed 
of, all those many years ago of owning. 

 

Whom ever buys this machine will be getting much more then what they pay for.

 

C.A.G.

 

On Sunday, June 28, 2020, 03:24:57 PM EDT, 'Curt George' via Legacy Ornamental 
Mills mailto:legacy-ornamental-mills@googlegroups.com> > wrote: 

 

 

I found my self thinking that I should buy it...  Something I just can do.  But 
as I said its one very nice machine.  some more details that I did not talk 
about are, The TK riser legs are the biggest ones the Tim ever made. giving you 
a lot more room for table attachments.  The TK quick change gear changer (I 
also one one, Awesome tool.)  For $900.00 depending on the bidding, this Legacy 
is one of the best that Ive seen. 

 

C.A.G. 

 

On Sunday, June 28, 2020, 01:10:29 PM EDT, mailto:bulke...@mmnet.com.au> > wrote: 

 

 

That is a really good deal curt 

 

Bill

 

From: 'Curt George' via Legacy Ornamental Mills 
mailto:legacy-ornamental-mills@googlegroups.com> > 
Sent: Monday, 29 June 2020 12:02 AM
To: Legacy ornamental mills mailto:legacy-ornamental-mills@googlegroups.com> >
Subject: Dusty Dave's Legacy

 

https://www.ebay.com/itm/133450803295?ul_noapp=true  

 

Hello Everyone, Here is the E-bay sale of Dave's Legacy,   

Its a Very Nice machine, Z axis, both motor drive and spindle motor,

The T.K. Quick change directional gear. Plus a lot more...

 

Check it out.

 

C.A.G.

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
<mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/1308365609.3414427.1593352921302%40mail.yahoo.com
 
<https://groups.google.com/d/msgid/legacy-ornamental-mills/1308365609.3414427.1593352921302%40mail.yahoo.com?utm_medium=email_source=footer>
 .

 


 
<https://www.avast.com/sig-email?utm_medium=email_source=link_campaign=sig-email_content=emailclient>
 

Virus-free.  
<https://www.avast.com/sig-email?utm_medium=email_source=link_campaign=sig-email_content=emailclient>
 www.avast.com 

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
<mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/01d64d6e%24ff312340%24fd9369c0%24%40mmnet.com.au
 
<https://groups.google.com/d/msgid/legacy-ornamental-mills/01d64d6e%24ff312340%24fd9369c0%24%40mmnet.com.au?utm_medium=email_source=footer>
 .

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
<mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/1109321658.3170073.1593372292109%40mail.yahoo.com
 
<https://groups.google.com/d/msgid/legacy-ornamental-mills/1109321658.3170073.1593372292109%40mail.yahoo.com?utm_medium=email_source=footer>
 .

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
<mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/2124645538.3489454.1593372932561%40mail.yahoo.com
 
<https://groups.google.com/d/msgid/legacy-ornamental-mills/2124645538.3489454.1593372932561%40mail.yahoo.com?utm_medium=email_source=footer>
 .



-- 
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this gr

RE: Dusty Dave's Legacy

2020-06-28 Thread bulkeley 
Never hurts to put on a bid, you never know?

 

Bill

 

From: 'Curt George' via Legacy Ornamental Mills 
 
Sent: Monday, 29 June 2020 5:25 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Dusty Dave's Legacy

 

I found my self thinking that I should buy it...  Something I just can do.  But 
as I said its one very nice machine.  some more details that I did not talk 
about are, The TK riser legs are the biggest ones the Tim ever made. giving you 
a lot more room for table attachments.  The TK quick change gear changer (I 
also one one, Awesome tool.)  For $900.00 depending on the bidding, this Legacy 
is one of the best that Ive seen. 

 

C.A.G. 

 

On Sunday, June 28, 2020, 01:10:29 PM EDT, mailto:bulke...@mmnet.com.au> > wrote: 

 

 

That is a really good deal curt 

 

Bill

 

From: 'Curt George' via Legacy Ornamental Mills 
mailto:legacy-ornamental-mills@googlegroups.com> > 
Sent: Monday, 29 June 2020 12:02 AM
To: Legacy ornamental mills mailto:legacy-ornamental-mills@googlegroups.com> >
Subject: Dusty Dave's Legacy

 

https://www.ebay.com/itm/133450803295?ul_noapp=true  

 

Hello Everyone, Here is the E-bay sale of Dave's Legacy,   

Its a Very Nice machine, Z axis, both motor drive and spindle motor,

The T.K. Quick change directional gear. Plus a lot more...

 

Check it out.

 

C.A.G.

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
<mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/1308365609.3414427.1593352921302%40mail.yahoo.com
 
<https://groups.google.com/d/msgid/legacy-ornamental-mills/1308365609.3414427.1593352921302%40mail.yahoo.com?utm_medium=email_source=footer>
 .

 


 
<https://www.avast.com/sig-email?utm_medium=email_source=link_campaign=sig-email_content=emailclient>
 

Virus-free.  
<https://www.avast.com/sig-email?utm_medium=email_source=link_campaign=sig-email_content=emailclient>
 www.avast.com 

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
<mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/01d64d6e%24ff312340%24fd9369c0%24%40mmnet.com.au
 
<https://groups.google.com/d/msgid/legacy-ornamental-mills/01d64d6e%24ff312340%24fd9369c0%24%40mmnet.com.au?utm_medium=email_source=footer>
 .

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
<mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/1109321658.3170073.1593372292109%40mail.yahoo.com
 
<https://groups.google.com/d/msgid/legacy-ornamental-mills/1109321658.3170073.1593372292109%40mail.yahoo.com?utm_medium=email_source=footer>
 .



-- 
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/001401d64d9c%241a7c77d0%244f756770%24%40mmnet.com.au.

Re: Dusty Dave's Legacy

2020-06-28 Thread 'Curt George' via Legacy Ornamental Mills 
 Woops! It should read. CAN NOT BUY! I just do not have the space, or the need. 
but the eye candy this machine is Awesome! the cabinet is very nice too. the 
hole machine shows its precision and Quality. it is the Legacy that I dreamed 
of, all those many years ago of owning. 
Whom ever buys this machine will be getting much more then what they pay for.
C.A.G.
On Sunday, June 28, 2020, 03:24:57 PM EDT, 'Curt George' via Legacy 
Ornamental Mills  wrote:  
 
  I found my self thinking that I should buy it...  Something I just can do.  
But as I said its one very nice machine.  some more details that I did not talk 
about are, The TK riser legs are the biggest ones the Tim ever made. giving you 
a lot more room for table attachments.  The TK quick change gear changer (I 
also one one, Awesome tool.)  For $900.00 depending on the bidding, this Legacy 
is one of the best that Ive seen. 
C.A.G. 
On Sunday, June 28, 2020, 01:10:29 PM EDT,  wrote:  
 
 #yiv2919227448 -- filtered {}#yiv2919227448 filtered {}#yiv2919227448 filtered 
{}#yiv2919227448 p.yiv2919227448MsoNormal, #yiv2919227448 
li.yiv2919227448MsoNormal, #yiv2919227448 div.yiv2919227448MsoNormal 
{margin:0cm;margin-bottom:.0001pt;font-size:11.0pt;font-family:sans-serif;}#yiv2919227448
 a:link, #yiv2919227448 span.yiv2919227448MsoHyperlink 
{color:blue;text-decoration:underline;}#yiv2919227448 
span.yiv2919227448EmailStyle19 
{font-family:sans-serif;color:windowtext;}#yiv2919227448 
.yiv2919227448MsoChpDefault {font-size:10.0pt;}#yiv2919227448 filtered 
{}#yiv2919227448 div.yiv2919227448WordSection1 {}#yiv2919227448 
That is a really good deal curt 

  

Bill

  

From: 'Curt George' via Legacy Ornamental Mills 
 
Sent: Monday, 29 June 2020 12:02 AM
To: Legacy ornamental mills 
Subject: Dusty Dave's Legacy

  

https://www.ebay.com/itm/133450803295?ul_noapp=true  

  

Hello Everyone, Here is the E-bay sale of Dave's Legacy,   

Its a Very Nice machine, Z axis, both motor drive and spindle motor,

The T.K. Quick change directional gear. Plus a lot more...

  

Check it out.

  

C.A.G.

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/1308365609.3414427.1593352921302%40mail.yahoo.com.


|  | Virus-free. www.avast.com  |

 

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/01d64d6e%24ff312340%24fd9369c0%24%40mmnet.com.au.
  

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/1109321658.3170073.1593372292109%40mail.yahoo.com.
  

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/2124645538.3489454.1593372932561%40mail.yahoo.com.

Re: Dusty Dave's Legacy

2020-06-28 Thread 'Curt George' via Legacy Ornamental Mills 
 I found my self thinking that I should buy it...  Something I just can do.  
But as I said its one very nice machine.  some more details that I did not talk 
about are, The TK riser legs are the biggest ones the Tim ever made. giving you 
a lot more room for table attachments.  The TK quick change gear changer (I 
also one one, Awesome tool.)  For $900.00 depending on the bidding, this Legacy 
is one of the best that Ive seen. 
C.A.G. 
On Sunday, June 28, 2020, 01:10:29 PM EDT,  wrote:  
 
 #yiv5079328523 #yiv5079328523 -- _filtered {} _filtered {} _filtered 
{}#yiv5079328523 #yiv5079328523 p.yiv5079328523MsoNormal, #yiv5079328523 
li.yiv5079328523MsoNormal, #yiv5079328523 div.yiv5079328523MsoNormal 
{margin:0cm;margin-bottom:.0001pt;font-size:11.0pt;font-family:sans-serif;}#yiv5079328523
 a:link, #yiv5079328523 span.yiv5079328523MsoHyperlink 
{color:blue;text-decoration:underline;}#yiv5079328523 
span.yiv5079328523EmailStyle19 
{font-family:sans-serif;color:windowtext;}#yiv5079328523 
.yiv5079328523MsoChpDefault {font-size:10.0pt;} _filtered {}#yiv5079328523 
div.yiv5079328523WordSection1 {}#yiv5079328523 
That is a really good deal curt 

  

Bill

  

From: 'Curt George' via Legacy Ornamental Mills 
 
Sent: Monday, 29 June 2020 12:02 AM
To: Legacy ornamental mills 
Subject: Dusty Dave's Legacy

  

https://www.ebay.com/itm/133450803295?ul_noapp=true  

  

Hello Everyone, Here is the E-bay sale of Dave's Legacy,   

Its a Very Nice machine, Z axis, both motor drive and spindle motor,

The T.K. Quick change directional gear. Plus a lot more...

  

Check it out.

  

C.A.G.

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/1308365609.3414427.1593352921302%40mail.yahoo.com.


|  | Virus-free. www.avast.com  |

 

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/01d64d6e%24ff312340%24fd9369c0%24%40mmnet.com.au.
  

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/1109321658.3170073.1593372292109%40mail.yahoo.com.

RE: Dusty Dave's Legacy

2020-06-28 Thread bulkeley 
That is a really good deal curt 

 

Bill

 

From: 'Curt George' via Legacy Ornamental Mills 
 
Sent: Monday, 29 June 2020 12:02 AM
To: Legacy ornamental mills 
Subject: Dusty Dave's Legacy

 

https://www.ebay.com/itm/133450803295?ul_noapp=true  

 

Hello Everyone, Here is the E-bay sale of Dave's Legacy,   

Its a Very Nice machine, Z axis, both motor drive and spindle motor,

The T.K. Quick change directional gear. Plus a lot more...

 

Check it out.

 

C.A.G.

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
 .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/1308365609.3414427.1593352921302%40mail.yahoo.com
 

 .



-- 
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/01d64d6e%24ff312340%24fd9369c0%24%40mmnet.com.au.