Re: Question for Legacy Chat 2-5-2013
Hi, sorry to say I was not successful in logging into this event. I thought I had done it correctly and setup an account as told to. When I came to login it said account deactivated I see the comments about the password being 1234 but this was only AFTER the event had finished. Hey ho, maybe I will have better luck next time. (I also desperately need to buy a new laptop as my Dell is 10 years old and has a mind of it's own) From what I am reading it appears to have been a success so I hope there will be another one. I gather Tim is to get a New EVO to play with which is great news. Martin -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills?hl=en. For more options, visit https://groups.google.com/groups/opt_out.
RE: Question for Legacy Chat 2-5-2013
How long to go before the live chat I'm checking the time here down under Bill -Original Message- From: legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Tim Krause Sent: Tuesday, 5 February 2013 3:22 PM To: legacy-ornamental-mills@googlegroups.com Subject: Re: Question for Legacy Chat 2-5-2013 Hello All, I'm really looking forward to the live chat tommorow. I'm thinking with a bunch of new guys trying to figure out the chat technology the agenda might be a little ambitious. I would also hope to see a longer time spent on the Evo. Copied from the original message - The agenda for the 1 hour is: - 10 min on the Evolution machine. - 10 min. QA - 10 min on CNC - 10 Min QA - 10 min on older equipment - 10 min QA I'm thankful to John at Legacy for even giving us this opportunity to communicate as a group. I'm well aware of the passionate history many of us have in this group. I hope we all keep this civil. -Tim -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills?hl=en. For more options, visit https://groups.google.com/groups/opt_out. - No virus found in this message. Checked by AVG - www.avg.com Version: 2013.0.2897 / Virus Database: 2639/6070 - Release Date: 01/31/13 - No virus found in this message. Checked by AVG - www.avg.com Version: 2013.0.2897 / Virus Database: 2639/6081 - Release Date: 02/04/13 -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills?hl=en. For more options, visit https://groups.google.com/groups/opt_out.
RE: Question for Legacy Chat 2-5-2013
12 min. On Feb 5, 2013 3:47 PM, Bill Bulkeley bulke...@mmnet.com.au wrote: How long to go before the live chat I'm checking the time here down under Bill -Original Message- From: legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Tim Krause Sent: Tuesday, 5 February 2013 3:22 PM To: legacy-ornamental-mills@googlegroups.com Subject: Re: Question for Legacy Chat 2-5-2013 Hello All, I'm really looking forward to the live chat tommorow. I'm thinking with a bunch of new guys trying to figure out the chat technology the agenda might be a little ambitious. I would also hope to see a longer time spent on the Evo. Copied from the original message - The agenda for the 1 hour is: - 10 min on the Evolution machine. - 10 min. QA - 10 min on CNC - 10 Min QA - 10 min on older equipment - 10 min QA I'm thankful to John at Legacy for even giving us this opportunity to communicate as a group. I'm well aware of the passionate history many of us have in this group. I hope we all keep this civil. -Tim -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills?hl=en. For more options, visit https://groups.google.com/groups/opt_out. - No virus found in this message. Checked by AVG - www.avg.com Version: 2013.0.2897 / Virus Database: 2639/6070 - Release Date: 01/31/13 - No virus found in this message. Checked by AVG - www.avg.com Version: 2013.0.2897 / Virus Database: 2639/6081 - Release Date: 02/04/13 -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills?hl=en. For more options, visit https://groups.google.com/groups/opt_out. -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills?hl=en. For more options, visit https://groups.google.com/groups/opt_out.
RE: Question for Legacy Chat 2-5-2013
Why cant i find the listing for it on the legacy listing page Bill From: legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Cole Andrews Sent: Wednesday, 6 February 2013 7:49 AM To: legacy-ornamental-mills@googlegroups.com Subject: RE: Question for Legacy Chat 2-5-2013 12 min. On Feb 5, 2013 3:47 PM, Bill Bulkeley bulke...@mmnet.com.au wrote: How long to go before the live chat I'm checking the time here down under Bill -Original Message- From: legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Tim Krause Sent: Tuesday, 5 February 2013 3:22 PM To: legacy-ornamental-mills@googlegroups.com Subject: Re: Question for Legacy Chat 2-5-2013 Hello All, I'm really looking forward to the live chat tommorow. I'm thinking with a bunch of new guys trying to figure out the chat technology the agenda might be a little ambitious. I would also hope to see a longer time spent on the Evo. Copied from the original message - The agenda for the 1 hour is: - 10 min on the Evolution machine. - 10 min. QA - 10 min on CNC - 10 Min QA - 10 min on older equipment - 10 min QA I'm thankful to John at Legacy for even giving us this opportunity to communicate as a group. I'm well aware of the passionate history many of us have in this group. I hope we all keep this civil. -Tim -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com mailto:legacy-ornamental-mills%2bunsubscr...@googlegroups.com . To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills?hl=en. For more options, visit https://groups.google.com/groups/opt_out. - No virus found in this message. Checked by AVG - www.avg.com Version: 2013.0.2897 / Virus Database: 2639/6070 - Release Date: 01/31/13 - No virus found in this message. Checked by AVG - www.avg.com Version: 2013.0.2897 / Virus Database: 2639/6081 - Release Date: 02/04/13 -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com mailto:legacy-ornamental-mills%2bunsubscr...@googlegroups.com . To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills?hl=en. For more options, visit https://groups.google.com/groups/opt_out. -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills?hl=en. For more options, visit https://groups.google.com/groups/opt_out. No virus found in this message. Checked by AVG - www.avg.com Version: 2013.0.2897 / Virus Database: 2639/6070 - Release Date: 01/31/13 _ No virus found in this message. Checked by AVG - www.avg.com Version: 2013.0.2897 / Virus Database: 2639/6083 - Release Date: 02/05/13 -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills?hl=en. For more options, visit https://groups.google.com/groups/opt_out.
RE: Question for Legacy Chat 2-5-2013
We have almost 2 hours before the class From: legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Bill Bulkeley Sent: Tuesday, February 05, 2013 3:53 PM To: legacy-ornamental-mills@googlegroups.com Subject: RE: Question for Legacy Chat 2-5-2013 Why cant i find the listing for it on the legacy listing page Bill From: legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Cole Andrews Sent: Wednesday, 6 February 2013 7:49 AM To: legacy-ornamental-mills@googlegroups.com Subject: RE: Question for Legacy Chat 2-5-2013 12 min. On Feb 5, 2013 3:47 PM, Bill Bulkeley bulke...@mmnet.com.au wrote: How long to go before the live chat I'm checking the time here down under Bill -Original Message- From: legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Tim Krause Sent: Tuesday, 5 February 2013 3:22 PM To: legacy-ornamental-mills@googlegroups.com Subject: Re: Question for Legacy Chat 2-5-2013 Hello All, I'm really looking forward to the live chat tommorow. I'm thinking with a bunch of new guys trying to figure out the chat technology the agenda might be a little ambitious. I would also hope to see a longer time spent on the Evo. Copied from the original message - The agenda for the 1 hour is: - 10 min on the Evolution machine. - 10 min. QA - 10 min on CNC - 10 Min QA - 10 min on older equipment - 10 min QA I'm thankful to John at Legacy for even giving us this opportunity to communicate as a group. I'm well aware of the passionate history many of us have in this group. I hope we all keep this civil. -Tim -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com mailto:legacy-ornamental-mills%2bunsubscr...@googlegroups.com . To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills?hl=en. For more options, visit https://groups.google.com/groups/opt_out. - No virus found in this message. Checked by AVG - www.avg.com Version: 2013.0.2897 / Virus Database: 2639/6070 - Release Date: 01/31/13 - No virus found in this message. Checked by AVG - www.avg.com Version: 2013.0.2897 / Virus Database: 2639/6081 - Release Date: 02/04/13 -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com mailto:legacy-ornamental-mills%2bunsubscr...@googlegroups.com . To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills?hl=en. For more options, visit https://groups.google.com/groups/opt_out. -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills?hl=en. For more options, visit https://groups.google.com/groups/opt_out. No virus found in this message. Checked by AVG - www.avg.com Version: 2013.0.2897 / Virus Database: 2639/6070 - Release Date: 01/31/13 _ No virus found in this message. Checked by AVG - www.avg.com Version: 2013.0.2897 / Virus Database: 2639/6083 - Release Date: 02/05/13 -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills?hl=en. For more options, visit https://groups.google.com/groups/opt_out. -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills?hl=en. For more options, visit https://groups.google.com/groups/opt_out.
Re: Question for Legacy Chat 2-5-2013
The Q A session will go active at 3:30 MST On Tue, Feb 5, 2013 at 2:08 PM, Jeff Becker jwb...@windstream.net wrote: We have almost 2 hours before the class ** ** *From:* legacy-ornamental-mills@googlegroups.com [mailto: legacy-ornamental-mills@googlegroups.com] *On Behalf Of *Bill Bulkeley *Sent:* Tuesday, February 05, 2013 3:53 PM *To:* legacy-ornamental-mills@googlegroups.com *Subject:* RE: Question for Legacy Chat 2-5-2013 ** ** Why cant i find the listing for it on the legacy listing page Bill ** ** *From:* legacy-ornamental-mills@googlegroups.com [ mailto:legacy-ornamental-mills@googlegroups.comlegacy-ornamental-mills@googlegroups.com] *On Behalf Of *Cole Andrews *Sent:* Wednesday, 6 February 2013 7:49 AM *To:* legacy-ornamental-mills@googlegroups.com *Subject:* RE: Question for Legacy Chat 2-5-2013 ** ** 12 min. On Feb 5, 2013 3:47 PM, Bill Bulkeley bulke...@mmnet.com.au wrote: How long to go before the live chat I'm checking the time here down under Bill -Original Message- From: legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Tim Krause Sent: Tuesday, 5 February 2013 3:22 PM To: legacy-ornamental-mills@googlegroups.com Subject: Re: Question for Legacy Chat 2-5-2013 Hello All, I'm really looking forward to the live chat tommorow. I'm thinking with a bunch of new guys trying to figure out the chat technology the agenda might be a little ambitious. I would also hope to see a longer time spent on the Evo. Copied from the original message - The agenda for the 1 hour is: - 10 min on the Evolution machine. - 10 min. QA - 10 min on CNC - 10 Min QA - 10 min on older equipment - 10 min QA I'm thankful to John at Legacy for even giving us this opportunity to communicate as a group. I'm well aware of the passionate history many of us have in this group. I hope we all keep this civil. -Tim -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills?hl=en. For more options, visit https://groups.google.com/groups/opt_out. - No virus found in this message. Checked by AVG - www.avg.com Version: 2013.0.2897 / Virus Database: 2639/6070 - Release Date: 01/31/13 - No virus found in this message. Checked by AVG - www.avg.com Version: 2013.0.2897 / Virus Database: 2639/6081 - Release Date: 02/04/13 -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills?hl=en. For more options, visit https://groups.google.com/groups/opt_out. -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills?hl=en. For more options, visit https://groups.google.com/groups/opt_out. No virus found in this message. Checked by AVG - www.avg.com Version: 2013.0.2897 / Virus Database: 2639/6070 - Release Date: 01/31/13* *** -- No virus found in this message. Checked by AVG - www.avg.com Version: 2013.0.2897 / Virus Database: 2639/6083 - Release Date: 02/05/13* *** -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills?hl=en. For more options, visit https://groups.google.com/groups/opt_out. -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills?hl=en. For more options, visit https
RE: Question for Legacy Chat 2-5-2013
The event is asking for a password, does anyone have it? From: legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of John Hennen Sent: Tuesday, February 05, 2013 4:11 PM To: legacy-ornamental-mills@googlegroups.com Subject: Re: Question for Legacy Chat 2-5-2013 The Q A session will go active at 3:30 MST On Tue, Feb 5, 2013 at 2:08 PM, Jeff Becker jwb...@windstream.net wrote: We have almost 2 hours before the class From: legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Bill Bulkeley Sent: Tuesday, February 05, 2013 3:53 PM To: legacy-ornamental-mills@googlegroups.com Subject: RE: Question for Legacy Chat 2-5-2013 Why cant i find the listing for it on the legacy listing page Bill From: legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Cole Andrews Sent: Wednesday, 6 February 2013 7:49 AM To: legacy-ornamental-mills@googlegroups.com Subject: RE: Question for Legacy Chat 2-5-2013 12 min. On Feb 5, 2013 3:47 PM, Bill Bulkeley bulke...@mmnet.com.au wrote: How long to go before the live chat I'm checking the time here down under Bill -Original Message- From: legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Tim Krause Sent: Tuesday, 5 February 2013 3:22 PM To: legacy-ornamental-mills@googlegroups.com Subject: Re: Question for Legacy Chat 2-5-2013 Hello All, I'm really looking forward to the live chat tommorow. I'm thinking with a bunch of new guys trying to figure out the chat technology the agenda might be a little ambitious. I would also hope to see a longer time spent on the Evo. Copied from the original message - The agenda for the 1 hour is: - 10 min on the Evolution machine. - 10 min. QA - 10 min on CNC - 10 Min QA - 10 min on older equipment - 10 min QA I'm thankful to John at Legacy for even giving us this opportunity to communicate as a group. I'm well aware of the passionate history many of us have in this group. I hope we all keep this civil. -Tim -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com mailto:legacy-ornamental-mills%2bunsubscr...@googlegroups.com . To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills?hl=en. For more options, visit https://groups.google.com/groups/opt_out. - No virus found in this message. Checked by AVG - www.avg.com Version: 2013.0.2897 / Virus Database: 2639/6070 - Release Date: 01/31/13 - No virus found in this message. Checked by AVG - www.avg.com Version: 2013.0.2897 / Virus Database: 2639/6081 - Release Date: 02/04/13 -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com mailto:legacy-ornamental-mills%2bunsubscr...@googlegroups.com . To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills?hl=en. For more options, visit https://groups.google.com/groups/opt_out. -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills?hl=en. For more options, visit https://groups.google.com/groups/opt_out. No virus found in this message. Checked by AVG - www.avg.com Version: 2013.0.2897 / Virus Database: 2639/6070 - Release Date: 01/31/13 _ No virus found in this message. Checked by AVG - www.avg.com Version: 2013.0.2897 / Virus Database: 2639/6083 - Release Date: 02/05/13 -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills?hl=en. For more options, visit https://groups.google.com/groups/opt_out. -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com
Re: Question for Legacy Chat 2-5-2013
The password for this Event is 1234 When you get into the session you will need to change your name from viewer to your name John On Tue, Feb 5, 2013 at 2:10 PM, John Hennen john.hen...@gmail.com wrote: The Q A session will go active at 3:30 MST On Tue, Feb 5, 2013 at 2:08 PM, Jeff Becker jwb...@windstream.net wrote: We have almost 2 hours before the class ** ** *From:* legacy-ornamental-mills@googlegroups.com [mailto: legacy-ornamental-mills@googlegroups.com] *On Behalf Of *Bill Bulkeley *Sent:* Tuesday, February 05, 2013 3:53 PM *To:* legacy-ornamental-mills@googlegroups.com *Subject:* RE: Question for Legacy Chat 2-5-2013 ** ** Why cant i find the listing for it on the legacy listing page Bill ** ** *From:* legacy-ornamental-mills@googlegroups.com [ mailto:legacy-ornamental-mills@googlegroups.comlegacy-ornamental-mills@googlegroups.com] *On Behalf Of *Cole Andrews *Sent:* Wednesday, 6 February 2013 7:49 AM *To:* legacy-ornamental-mills@googlegroups.com *Subject:* RE: Question for Legacy Chat 2-5-2013 ** ** 12 min. On Feb 5, 2013 3:47 PM, Bill Bulkeley bulke...@mmnet.com.au wrote:*** * How long to go before the live chat I'm checking the time here down under Bill -Original Message- From: legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Tim Krause Sent: Tuesday, 5 February 2013 3:22 PM To: legacy-ornamental-mills@googlegroups.com Subject: Re: Question for Legacy Chat 2-5-2013 Hello All, I'm really looking forward to the live chat tommorow. I'm thinking with a bunch of new guys trying to figure out the chat technology the agenda might be a little ambitious. I would also hope to see a longer time spent on the Evo. Copied from the original message - The agenda for the 1 hour is: - 10 min on the Evolution machine. - 10 min. QA - 10 min on CNC - 10 Min QA - 10 min on older equipment - 10 min QA I'm thankful to John at Legacy for even giving us this opportunity to communicate as a group. I'm well aware of the passionate history many of us have in this group. I hope we all keep this civil. -Tim -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills?hl=en. For more options, visit https://groups.google.com/groups/opt_out. - No virus found in this message. Checked by AVG - www.avg.com Version: 2013.0.2897 / Virus Database: 2639/6070 - Release Date: 01/31/13 - No virus found in this message. Checked by AVG - www.avg.com Version: 2013.0.2897 / Virus Database: 2639/6081 - Release Date: 02/04/13 -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills?hl=en. For more options, visit https://groups.google.com/groups/opt_out. -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills?hl=en. For more options, visit https://groups.google.com/groups/opt_out. No virus found in this message. Checked by AVG - www.avg.com Version: 2013.0.2897 / Virus Database: 2639/6070 - Release Date: 01/31/13 -- No virus found in this message. Checked by AVG - www.avg.com Version: 2013.0.2897 / Virus Database: 2639/6083 - Release Date: 02/05/13 -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills?hl=en. For more options, visit https://groups.google.com/groups/opt_out. -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr
Re: Question for Legacy Chat 2-5-2013
The password for this Event is 1234 When you get into the session you will need to change your name from viewer to your name On Tue, Feb 5, 2013 at 3:23 PM, John Hennen john.hen...@gmail.com wrote: The password for this Event is 1234 When you get into the session you will need to change your name from viewer to your name John On Tue, Feb 5, 2013 at 2:10 PM, John Hennen john.hen...@gmail.com wrote: The Q A session will go active at 3:30 MST On Tue, Feb 5, 2013 at 2:08 PM, Jeff Becker jwb...@windstream.netwrote: We have almost 2 hours before the class ** ** *From:* legacy-ornamental-mills@googlegroups.com [mailto: legacy-ornamental-mills@googlegroups.com] *On Behalf Of *Bill Bulkeley *Sent:* Tuesday, February 05, 2013 3:53 PM *To:* legacy-ornamental-mills@googlegroups.com *Subject:* RE: Question for Legacy Chat 2-5-2013 ** ** Why cant i find the listing for it on the legacy listing page Bill ** ** *From:* legacy-ornamental-mills@googlegroups.com [ mailto:legacy-ornamental-mills@googlegroups.comlegacy-ornamental-mills@googlegroups.com] *On Behalf Of *Cole Andrews *Sent:* Wednesday, 6 February 2013 7:49 AM *To:* legacy-ornamental-mills@googlegroups.com *Subject:* RE: Question for Legacy Chat 2-5-2013 ** ** 12 min. On Feb 5, 2013 3:47 PM, Bill Bulkeley bulke...@mmnet.com.au wrote:** ** How long to go before the live chat I'm checking the time here down under Bill -Original Message- From: legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Tim Krause Sent: Tuesday, 5 February 2013 3:22 PM To: legacy-ornamental-mills@googlegroups.com Subject: Re: Question for Legacy Chat 2-5-2013 Hello All, I'm really looking forward to the live chat tommorow. I'm thinking with a bunch of new guys trying to figure out the chat technology the agenda might be a little ambitious. I would also hope to see a longer time spent on the Evo. Copied from the original message - The agenda for the 1 hour is: - 10 min on the Evolution machine. - 10 min. QA - 10 min on CNC - 10 Min QA - 10 min on older equipment - 10 min QA I'm thankful to John at Legacy for even giving us this opportunity to communicate as a group. I'm well aware of the passionate history many of us have in this group. I hope we all keep this civil. -Tim -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills?hl=en. For more options, visit https://groups.google.com/groups/opt_out. - No virus found in this message. Checked by AVG - www.avg.com Version: 2013.0.2897 / Virus Database: 2639/6070 - Release Date: 01/31/13 - No virus found in this message. Checked by AVG - www.avg.com Version: 2013.0.2897 / Virus Database: 2639/6081 - Release Date: 02/04/13 -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills?hl=en. For more options, visit https://groups.google.com/groups/opt_out. -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills?hl=en. For more options, visit https://groups.google.com/groups/opt_out. No virus found in this message. Checked by AVG - www.avg.com Version: 2013.0.2897 / Virus Database: 2639/6070 - Release Date: 01/31/13 -- No virus found in this message. Checked by AVG - www.avg.com Version: 2013.0.2897 / Virus Database: 2639/6083 - Release Date: 02/05/13 -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills?hl=en. For more options, visit https://groups.google.com/groups/opt_out. -- You received
Re: Question for Legacy Chat 2-5-2013
I have entered password 1234, and it is telling me Please check the number 1234 and try again, or ask your event host for assistance. I got to this point by clicking on Unlisted Events from the menu on the left of Webex's page. Brigitte On 5 February 2013 22:23, John Hennen john.hen...@gmail.com wrote: The password for this Event is 1234 When you get into the session you will need to change your name from viewer to your name John On Tue, Feb 5, 2013 at 2:10 PM, John Hennen john.hen...@gmail.com wrote: The Q A session will go active at 3:30 MST On Tue, Feb 5, 2013 at 2:08 PM, Jeff Becker jwb...@windstream.netwrote: We have almost 2 hours before the class ** ** *From:* legacy-ornamental-mills@googlegroups.com [mailto: legacy-ornamental-mills@googlegroups.com] *On Behalf Of *Bill Bulkeley *Sent:* Tuesday, February 05, 2013 3:53 PM *To:* legacy-ornamental-mills@googlegroups.com *Subject:* RE: Question for Legacy Chat 2-5-2013 ** ** Why cant i find the listing for it on the legacy listing page Bill ** ** *From:* legacy-ornamental-mills@googlegroups.com [ mailto:legacy-ornamental-mills@googlegroups.comlegacy-ornamental-mills@googlegroups.com] *On Behalf Of *Cole Andrews *Sent:* Wednesday, 6 February 2013 7:49 AM *To:* legacy-ornamental-mills@googlegroups.com *Subject:* RE: Question for Legacy Chat 2-5-2013 ** ** 12 min. On Feb 5, 2013 3:47 PM, Bill Bulkeley bulke...@mmnet.com.au wrote:** ** How long to go before the live chat I'm checking the time here down under Bill -Original Message- From: legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Tim Krause Sent: Tuesday, 5 February 2013 3:22 PM To: legacy-ornamental-mills@googlegroups.com Subject: Re: Question for Legacy Chat 2-5-2013 Hello All, I'm really looking forward to the live chat tommorow. I'm thinking with a bunch of new guys trying to figure out the chat technology the agenda might be a little ambitious. I would also hope to see a longer time spent on the Evo. Copied from the original message - The agenda for the 1 hour is: - 10 min on the Evolution machine. - 10 min. QA - 10 min on CNC - 10 Min QA - 10 min on older equipment - 10 min QA I'm thankful to John at Legacy for even giving us this opportunity to communicate as a group. I'm well aware of the passionate history many of us have in this group. I hope we all keep this civil. -Tim -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills?hl=en. For more options, visit https://groups.google.com/groups/opt_out. - No virus found in this message. Checked by AVG - www.avg.com Version: 2013.0.2897 / Virus Database: 2639/6070 - Release Date: 01/31/13 - No virus found in this message. Checked by AVG - www.avg.com Version: 2013.0.2897 / Virus Database: 2639/6081 - Release Date: 02/04/13 -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills?hl=en. For more options, visit https://groups.google.com/groups/opt_out. -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills?hl=en. For more options, visit https://groups.google.com/groups/opt_out. No virus found in this message. Checked by AVG - www.avg.com Version: 2013.0.2897 / Virus Database: 2639/6070 - Release Date: 01/31/13 -- No virus found in this message. Checked by AVG - www.avg.com Version: 2013.0.2897 / Virus Database: 2639/6083 - Release Date: 02/05/13 -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills?hl=en
RE: Question for Legacy Chat 2-5-2013
I got in by going to Legacy's cnc web page, going to the training page, clicked on step 2 that took me to a web ex page there I clicked on Join for the first class then filled out the info on the right with the code 1234 and I got in the class, the class will not start until 4:00 So you didn't miss anything From: legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Brigitte Graham Sent: Tuesday, February 05, 2013 5:37 PM To: legacy-ornamental-mills@googlegroups.com Subject: Re: Question for Legacy Chat 2-5-2013 I have entered password 1234, and it is telling me Please check the number 1234 and try again, or ask your event host for assistance. I got to this point by clicking on Unlisted Events from the menu on the left of Webex's page. Brigitte On 5 February 2013 22:23, John Hennen john.hen...@gmail.com wrote: The password for this Event is 1234 When you get into the session you will need to change your name from viewer to your name John On Tue, Feb 5, 2013 at 2:10 PM, John Hennen john.hen...@gmail.com wrote: The Q A session will go active at 3:30 MST On Tue, Feb 5, 2013 at 2:08 PM, Jeff Becker jwb...@windstream.net wrote: We have almost 2 hours before the class From: legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Bill Bulkeley Sent: Tuesday, February 05, 2013 3:53 PM To: legacy-ornamental-mills@googlegroups.com Subject: RE: Question for Legacy Chat 2-5-2013 Why cant i find the listing for it on the legacy listing page Bill From: legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Cole Andrews Sent: Wednesday, 6 February 2013 7:49 AM To: legacy-ornamental-mills@googlegroups.com Subject: RE: Question for Legacy Chat 2-5-2013 12 min. On Feb 5, 2013 3:47 PM, Bill Bulkeley bulke...@mmnet.com.au wrote: How long to go before the live chat I'm checking the time here down under Bill -Original Message- From: legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Tim Krause Sent: Tuesday, 5 February 2013 3:22 PM To: legacy-ornamental-mills@googlegroups.com Subject: Re: Question for Legacy Chat 2-5-2013 Hello All, I'm really looking forward to the live chat tommorow. I'm thinking with a bunch of new guys trying to figure out the chat technology the agenda might be a little ambitious. I would also hope to see a longer time spent on the Evo. Copied from the original message - The agenda for the 1 hour is: - 10 min on the Evolution machine. - 10 min. QA - 10 min on CNC - 10 Min QA - 10 min on older equipment - 10 min QA I'm thankful to John at Legacy for even giving us this opportunity to communicate as a group. I'm well aware of the passionate history many of us have in this group. I hope we all keep this civil. -Tim -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com mailto:legacy-ornamental-mills%2bunsubscr...@googlegroups.com . To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills?hl=en. For more options, visit https://groups.google.com/groups/opt_out. - No virus found in this message. Checked by AVG - www.avg.com Version: 2013.0.2897 / Virus Database: 2639/6070 - Release Date: 01/31/13 - No virus found in this message. Checked by AVG - www.avg.com Version: 2013.0.2897 / Virus Database: 2639/6081 - Release Date: 02/04/13 -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com mailto:legacy-ornamental-mills%2bunsubscr...@googlegroups.com . To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills?hl=en. For more options, visit https://groups.google.com/groups/opt_out. -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills?hl=en. For more options, visit https://groups.google.com/groups/opt_out. No virus found in this message. Checked by AVG - www.avg.com Version: 2013.0.2897 / Virus Database: 2639/6070 - Release Date: 01/31/13 _ No virus found in this message. Checked by AVG - www.avg.com Version
Re: Question for Legacy Chat 2-5-2013
I got in to the point of viewing his desktop and then my computer would freeze up and had to kill the power to be able to restart my computer. This happened 3 times so I am giving up -Original Message- From: Brigitte Graham brigittegraha...@gmail.com To: legacy-ornamental-mills legacy-ornamental-mills@googlegroups.com Sent: Tue, Feb 5, 2013 5:36 pm Subject: Re: Question for Legacy Chat 2-5-2013 I have entered password 1234, and it is telling me Please check the number 1234 and try again, or ask your event host for assistance. I got to this point by clicking on Unlisted Events from the menu on the left of Webex's page. Brigitte On 5 February 2013 22:23, John Hennen john.hen...@gmail.com wrote: The password for this Event is 1234 When you get into the session you will need to change your name from viewer to your name John On Tue, Feb 5, 2013 at 2:10 PM, John Hennen john.hen...@gmail.com wrote: The Q A session will go active at 3:30 MST On Tue, Feb 5, 2013 at 2:08 PM, Jeff Becker jwb...@windstream.net wrote: We have almost 2 hours before the class From: legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Bill Bulkeley Sent: Tuesday, February 05, 2013 3:53 PM To: legacy-ornamental-mills@googlegroups.com Subject: RE: Question for Legacy Chat 2-5-2013 Why cant i find the listing for it on the legacy listing page Bill From: legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Cole Andrews Sent: Wednesday, 6 February 2013 7:49 AM To: legacy-ornamental-mills@googlegroups.com Subject: RE: Question for Legacy Chat 2-5-2013 12 min. On Feb 5, 2013 3:47 PM, Bill Bulkeley bulke...@mmnet.com.au wrote: How long to go before the live chat I'm checking the time here down under Bill -Original Message- From: legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Tim Krause Sent: Tuesday, 5 February 2013 3:22 PM To: legacy-ornamental-mills@googlegroups.com Subject: Re: Question for Legacy Chat 2-5-2013 Hello All, I'm really looking forward to the live chat tommorow. I'm thinking with a bunch of new guys trying to figure out the chat technology the agenda might be a little ambitious. I would also hope to see a longer time spent on the Evo. Copied from the original message - The agenda for the 1 hour is: - 10 min on the Evolution machine. - 10 min. QA - 10 min on CNC - 10 Min QA - 10 min on older equipment - 10 min QA I'm thankful to John at Legacy for even giving us this opportunity to communicate as a group. I'm well aware of the passionate history many of us have in this group. I hope we all keep this civil. -Tim -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills?hl=en. For more options, visit https://groups.google.com/groups/opt_out. - No virus found in this message. Checked by AVG - www.avg.com Version: 2013.0.2897 / Virus Database: 2639/6070 - Release Date: 01/31/13 - No virus found in this message. Checked by AVG - www.avg.com Version: 2013.0.2897 / Virus Database: 2639/6081 - Release Date: 02/04/13 -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills?hl=en. For more options, visit https://groups.google.com/groups/opt_out. -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills?hl=en. For more options, visit https://groups.google.com/groups/opt_out. No virus found in this message. Checked by AVG - www.avg.com Version: 2013.0.2897 / Virus Database: 2639/6070 - Release Date: 01/31/13 No virus found in this message. Checked by AVG - www.avg.com Version: 2013.0.2897 / Virus Database: 2639/6083 - Release Date: 02/05/13 -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr
Re: Question for Legacy Chat 2-5-2013
Hello All, I'm really looking forward to the live chat tommorow. I'm thinking with a bunch of new guys trying to figure out the chat technology the agenda might be a little ambitious. I would also hope to see a longer time spent on the Evo. Copied from the original message - The agenda for the 1 hour is: - 10 min on the Evolution machine. - 10 min. QA - 10 min on CNC - 10 Min QA - 10 min on older equipment - 10 min QA I'm thankful to John at Legacy for even giving us this opportunity to communicate as a group. I'm well aware of the passionate history many of us have in this group. I hope we all keep this civil. -Tim -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills?hl=en. For more options, visit https://groups.google.com/groups/opt_out.
Re: Question for Legacy Chat 2-5-2013
Well Im regestered now. I dont know if this old conputer will be any good for this ( I do not own a web cam.), but I will try to be there.hopefully everything will work out fine? ;-) C.A.G. - Original Message - From: Tim Krause To: legacy-ornamental-mills@googlegroups.com Sent: Saturday, February 02, 2013 9:30 PM Subject: Re: Question for Legacy Chat 2-5-2013 NO your not missing it. See below. Here is how to join in. Go to Legacycncwoodworking.com. Under CNC101 you will find On-line Training . Click on that and you will see Steps 1, 2 and 3. The first step has a tutorial by Tracy on how to use the WebEx system and get it set up on your computer. Step 2 will take you to a WebEx list of events. Our event is not listed yet but will be in time for the meeting. You will not need an access code. Step 3 is your registration page. Please go through these steps today or as soon as you can. If you have a problem, please email or call John at Legacy for help. There is a calendar of events but our event will not show up there. It will be on the WebEx list of events (Step 2) and you will click on it there to join in. - Original Message - From: curt george To: legacy-ornamental-mills@googlegroups.com Sent: Saturday, February 02, 2013 6:05 PM Subject: Re: Question for Legacy Chat 2-5-2013 Hello Everyone. not meaning to change the subject. but I just tried to regester for this class. Its not on the listing. Am I looking in the wrong place? https://legacycnc.webex.com/mw0307l/mywebex/default.do?siteurl=legacycnc C.A.G. - Original Message - From: Tim Krause To: legacy-ornamental-mills@googlegroups.com Sent: Saturday, February 02, 2013 8:49 PM Subject: Re: Question for Legacy Chat 2-5-2013 Ron, would you like to reword this question? John, I KNOW what you are saying, but I'm not going to censor the questions. I also know Andy is receiving the messages from this group in his email so it's really to late. To All, It was pointed out on Friday via my private email that all the questions need to be in on Friday. I submitted the single question that I had at the time (Mac's compatibility question). I'm hoping that the event will not be canceled because of lack of participation. Has everyone signed up yet. Pre-registration is required and that could show our interest level is sincere. -Tim - Original Message - From: John Hennen To: legacy-ornamental-mills@googlegroups.com Sent: Saturday, February 02, 2013 4:33 PM Subject: Re: Question for Legacy Chat 2-5-2013 It is a fair question. Andy will be there to answer these questions, however I would recommend rewording it to sound a little less rash. You all should thank Stan for putting himself out there to set this up and think about questions with this in mind. As I said, it is a fair question but I would have Tim reword that before he sends it to Andy and Tracy. Just thoughts from the one that pushed to make this Q A session from inside. John -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills?hl=en. For more options, visit https://groups.google.com/groups/opt_out. -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills?hl=en. For more options, visit https://groups.google.com/groups/opt_out. -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills?hl=en. For more options, visit https://groups.google.com/groups/opt_out. -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email
Re: Question for Legacy Chat 2-5-2013
Curt, you don't need a web cam. You will be able to ask questions by typing them. Generally the 2 way audio has not worked. We see and hear them but we type our questions. Stan Shuford s...@shuford.com On Sun, Feb 3, 2013 at 6:27 AM, curt george curtgeo...@wowway.com wrote: Well Im regestered now. I dont know if this old conputer will be any good for this ( I do not own a web cam.), but I will try to be there.hopefully everything will work out fine? ;-) C.A.G. - Original Message - From: Tim Krause To: legacy-ornamental-mills@googlegroups.com Sent: Saturday, February 02, 2013 9:30 PM Subject: Re: Question for Legacy Chat 2-5-2013 NO your not missing it. See below. Here is how to join in. Go to Legacycncwoodworking.com. Under CNC101 you will find On-line Training . Click on that and you will see Steps 1, 2 and 3. The first step has a tutorial by Tracy on how to use the WebEx system and get it set up on your computer. Step 2 will take you to a WebEx list of events. Our event is not listed yet but will be in time for the meeting. You will not need an access code. Step 3 is your registration page. Please go through these steps today or as soon as you can. If you have a problem, please email or call John at Legacy for help. There is a calendar of events but our event will not show up there. It will be on the WebEx list of events (Step 2) and you will click on it there to join in. - Original Message - From: curt george To: legacy-ornamental-mills@googlegroups.com Sent: Saturday, February 02, 2013 6:05 PM Subject: Re: Question for Legacy Chat 2-5-2013 Hello Everyone. not meaning to change the subject. but I just tried to regester for this class. Its not on the listing. Am I looking in the wrong place? https://legacycnc.webex.com/mw0307l/mywebex/default.do?siteurl=legacycnc C.A.G. - Original Message - From: Tim Krause To: legacy-ornamental-mills@googlegroups.com Sent: Saturday, February 02, 2013 8:49 PM Subject: Re: Question for Legacy Chat 2-5-2013 Ron, would you like to reword this question? John, I KNOW what you are saying, but I'm not going to censor the questions. I also know Andy is receiving the messages from this group in his email so it's really to late. To All, It was pointed out on Friday via my private email that all the questions need to be in on Friday. I submitted the single question that I had at the time (Mac's compatibility question). I'm hoping that the event will not be canceled because of lack of participation. Has everyone signed up yet. Pre-registration is required and that could show our interest level is sincere. -Tim - Original Message - From: John Hennen To: legacy-ornamental-mills@googlegroups.com Sent: Saturday, February 02, 2013 4:33 PM Subject: Re: Question for Legacy Chat 2-5-2013 It is a fair question. Andy will be there to answer these questions, however I would recommend rewording it to sound a little less rash. You all should thank Stan for putting himself out there to set this up and think about questions with this in mind. As I said, it is a fair question but I would have Tim reword that before he sends it to Andy and Tracy. Just thoughts from the one that pushed to make this Q A session from inside. John -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills?hl=en. For more options, visit https://groups.google.com/groups/opt_out. -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills?hl=en. For more options, visit https://groups.google.com/groups/opt_out. -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills?hl=en. For more options, visit https://groups.google.com/groups/opt_out. -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills
Re: Question for Legacy Chat 2-5-2013
OK Stan Thank you for the in-put . E-mails I understand but Teleconferencing is something new for me. ;-) C.A.G. - Original Message - From: Stan Shuford s...@shuford.com To: legacy-ornamental-mills@googlegroups.com Sent: Sunday, February 03, 2013 9:05 AM Subject: Re: Question for Legacy Chat 2-5-2013 Curt, you don't need a web cam. You will be able to ask questions by typing them. Generally the 2 way audio has not worked. We see and hear them but we type our questions. Stan Shuford s...@shuford.com On Sun, Feb 3, 2013 at 6:27 AM, curt george curtgeo...@wowway.com wrote: Well Im regestered now. I dont know if this old conputer will be any good for this ( I do not own a web cam.), but I will try to be there.hopefully everything will work out fine? ;-) C.A.G. - Original Message - From: Tim Krause To: legacy-ornamental-mills@googlegroups.com Sent: Saturday, February 02, 2013 9:30 PM Subject: Re: Question for Legacy Chat 2-5-2013 NO your not missing it. See below. Here is how to join in. Go to Legacycncwoodworking.com. Under CNC101 you will find On-line Training . Click on that and you will see Steps 1, 2 and 3. The first step has a tutorial by Tracy on how to use the WebEx system and get it set up on your computer. Step 2 will take you to a WebEx list of events. Our event is not listed yet but will be in time for the meeting. You will not need an access code. Step 3 is your registration page. Please go through these steps today or as soon as you can. If you have a problem, please email or call John at Legacy for help. There is a calendar of events but our event will not show up there. It will be on the WebEx list of events (Step 2) and you will click on it there to join in. - Original Message - From: curt george To: legacy-ornamental-mills@googlegroups.com Sent: Saturday, February 02, 2013 6:05 PM Subject: Re: Question for Legacy Chat 2-5-2013 Hello Everyone. not meaning to change the subject. but I just tried to regester for this class. Its not on the listing. Am I looking in the wrong place? https://legacycnc.webex.com/mw0307l/mywebex/default.do?siteurl=legacycnc C.A.G. - Original Message - From: Tim Krause To: legacy-ornamental-mills@googlegroups.com Sent: Saturday, February 02, 2013 8:49 PM Subject: Re: Question for Legacy Chat 2-5-2013 Ron, would you like to reword this question? John, I KNOW what you are saying, but I'm not going to censor the questions. I also know Andy is receiving the messages from this group in his email so it's really to late. To All, It was pointed out on Friday via my private email that all the questions need to be in on Friday. I submitted the single question that I had at the time (Mac's compatibility question). I'm hoping that the event will not be canceled because of lack of participation. Has everyone signed up yet. Pre-registration is required and that could show our interest level is sincere. -Tim - Original Message - From: John Hennen To: legacy-ornamental-mills@googlegroups.com Sent: Saturday, February 02, 2013 4:33 PM Subject: Re: Question for Legacy Chat 2-5-2013 It is a fair question. Andy will be there to answer these questions, however I would recommend rewording it to sound a little less rash. You all should thank Stan for putting himself out there to set this up and think about questions with this in mind. As I said, it is a fair question but I would have Tim reword that before he sends it to Andy and Tracy. Just thoughts from the one that pushed to make this Q A session from inside. John -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills?hl=en. For more options, visit https://groups.google.com/groups/opt_out. -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills?hl=en. For more options, visit https://groups.google.com/groups/opt_out. -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills?hl=en. For more options, visit https://groups.google.com
Re: Question for Legacy Chat 2-5-2013
On Fri, Feb 1, 2013 at 11:47 AM, Tim Krause artmarb...@comcast.net wrote: ** There is only one question at the moment for Legacy. Please add them to this thread ASAP. Question 1: What parts, component assemblies, and accessories do the Evo*lution* and our (legacy) manual mills share/have in common. (Even talking nuts,bolts, and bearings here.) I want to know what parts accessories on/for the Evo will work on my LOM 1000/1200. Question 2. Some time ago I wanted to purchase a Legacy cnc (type undetermined) but was put off by the fact that support for the manual machines was so poor, as demonstrated by the amount of complaints I seemed to see from our members. There seems to have been a constant dribble of this to the extent we have relied on support from within our group rather than from Legacy. I have shelved any intentions of purchasing any further high dollar items from them until I can see a definite improvement. Comments please Legacy. -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills?hl=en. For more options, visit https://groups.google.com/groups/opt_out. -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills?hl=en. For more options, visit https://groups.google.com/groups/opt_out.
Re: Question for Legacy Chat 2-5-2013
It is a fair question. Andy will be there to answer these questions, however I would recommend rewording it to sound a little less rash. You all should thank Stan for putting himself out there to set this up and think about questions with this in mind. As I said, it is a fair question but I would have Tim reword that before he sends it to Andy and Tracy. Just thoughts from the one that pushed to make this Q A session from inside. John -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills?hl=en. For more options, visit https://groups.google.com/groups/opt_out.
Re: Question for Legacy Chat 2-5-2013
I am not too concerned with how Legacy may feel about being exposed as a company that does not support it's customers, I am more concerned that they do not have the opportunity to do the same to others who are investing considerably more in their equipment than I ever did. By being conciliatory and allowing them to feel we are a bunch of wimps just gives more power to their elbow. DON'T enter this relationship as some sort of pathetic bunch of ingrates but as an organised group of customers who by utilising the power of the internet demand the the level of customer support they are entitled too!! On Sat, Feb 2, 2013 at 6:18 PM, curt george curtgeo...@wowway.com wrote: ** Hello everyone. Question #2 is a hard ball type of question. Stating that Legacy as a company has some faults is nothing new. but I feel this question may not be the best way to get things started off. We want Legacy to start stepping up to the plate,(so to speak) with the Owners of there older equipment,We are being left out,and not being treated as customers in the way we deserve. But BY pointing out the turd in the toilet bowl may not be the best way to do this. ;-) Just a note to think about. C.A.G. - Original Message - *From:* Ron Taylor rontaylor1...@gmail.com *To:* legacy-ornamental-mills@googlegroups.com *Sent:* Saturday, February 02, 2013 5:29 PM *Subject:* Re: Question for Legacy Chat 2-5-2013 On Fri, Feb 1, 2013 at 11:47 AM, Tim Krause artmarb...@comcast.netwrote: ** There is only one question at the moment for Legacy. Please add them to this thread ASAP. Question 1: What parts, component assemblies, and accessories do the Evo*lution*and our (legacy) manual mills share/have in common. (Even talking nuts, bolts, and bearings here.) I want to know what parts accessories on/for the Evo will work on my LOM 1000/1200. Question 2. Some time ago I wanted to purchase a Legacy cnc (type undetermined) but was put off by the fact that support for the manual machines was so poor, as demonstrated by the amount of complaints I seemed to see from our members. There seems to have been a constant dribble of this to the extent we have relied on support from within our group rather than from Legacy. I have shelved any intentions of purchasing any further high dollar items from them until I can see a definite improvement. Comments please Legacy. -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills?hl=en. For more options, visit https://groups.google.com/groups/opt_out. -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills?hl=en. For more options, visit https://groups.google.com/groups/opt_out. -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills?hl=en. For more options, visit https://groups.google.com/groups/opt_out. -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills?hl=en. For more options, visit https://groups.google.com/groups/opt_out.
Re: Question for Legacy Chat 2-5-2013
I agree ,maybe a lesson on technique like Brandon just went through would be good. That would cut a path across all of our manual machines. Has anyone figured out how to tape it , I will be traveling. On Feb 2, 2013 7:18 PM, curt george curtgeo...@wowway.com wrote: ** Hello everyone. Question #2 is a hard ball type of question. Stating that Legacy as a company has some faults is nothing new. but I feel this question may not be the best way to get things started off. We want Legacy to start stepping up to the plate,(so to speak) with the Owners of there older equipment,We are being left out,and not being treated as customers in the way we deserve. But BY pointing out the turd in the toilet bowl may not be the best way to do this. ;-) Just a note to think about. C.A.G. - Original Message - *From:* Ron Taylor rontaylor1...@gmail.com *To:* legacy-ornamental-mills@googlegroups.com *Sent:* Saturday, February 02, 2013 5:29 PM *Subject:* Re: Question for Legacy Chat 2-5-2013 On Fri, Feb 1, 2013 at 11:47 AM, Tim Krause artmarb...@comcast.netwrote: ** There is only one question at the moment for Legacy. Please add them to this thread ASAP. Question 1: What parts, component assemblies, and accessories do the Evo*lution*and our (legacy) manual mills share/have in common. (Even talking nuts, bolts, and bearings here.) I want to know what parts accessories on/for the Evo will work on my LOM 1000/1200. Question 2. Some time ago I wanted to purchase a Legacy cnc (type undetermined) but was put off by the fact that support for the manual machines was so poor, as demonstrated by the amount of complaints I seemed to see from our members. There seems to have been a constant dribble of this to the extent we have relied on support from within our group rather than from Legacy. I have shelved any intentions of purchasing any further high dollar items from them until I can see a definite improvement. Comments please Legacy. -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills?hl=en. For more options, visit https://groups.google.com/groups/opt_out. -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills?hl=en. For more options, visit https://groups.google.com/groups/opt_out. -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills?hl=en. For more options, visit https://groups.google.com/groups/opt_out. -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills?hl=en. For more options, visit https://groups.google.com/groups/opt_out.
RE: Question for Legacy Chat 2-5-2013
How about asking if legacy could post some projects for the manual owners like they used to before the cnc mills arrived Bill From: legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Cole Andrews Sent: Sunday, 3 February 2013 11:45 AM To: legacy-ornamental-mills@googlegroups.com Subject: Re: Question for Legacy Chat 2-5-2013 I agree ,maybe a lesson on technique like Brandon just went through would be good. That would cut a path across all of our manual machines. Has anyone figured out how to tape it , I will be traveling. On Feb 2, 2013 7:18 PM, curt george curtgeo...@wowway.com wrote: Hello everyone. Question #2 is a hard ball type of question. Stating that Legacy as a company has some faults is nothing new. but I feel this question may not be the best way to get things started off. We want Legacy to start stepping up to the plate,(so to speak) with the Owners of there older equipment,We are being left out,and not being treated as customers in the way we deserve. But BY pointing out the turd in the toilet bowl may not be the best way to do this. ;-) Just a note to think about. C.A.G. - Original Message - From: Ron Taylor mailto:rontaylor1...@gmail.com To: legacy-ornamental-mills@googlegroups.com Sent: Saturday, February 02, 2013 5:29 PM Subject: Re: Question for Legacy Chat 2-5-2013 On Fri, Feb 1, 2013 at 11:47 AM, Tim Krause artmarb...@comcast.net wrote: There is only one question at the moment for Legacy. Please add them to this thread ASAP. Question 1: What parts, component assemblies, and accessories do the Evolution and our (legacy) manual mills share/have in common. (Even talking nuts, bolts, and bearings here.) I want to know what parts accessories on/for the Evo will work on my LOM 1000/1200. Question 2. Some time ago I wanted to purchase a Legacy cnc (type undetermined) but was put off by the fact that support for the manual machines was so poor, as demonstrated by the amount of complaints I seemed to see from our members. There seems to have been a constant dribble of this to the extent we have relied on support from within our group rather than from Legacy. I have shelved any intentions of purchasing any further high dollar items from them until I can see a definite improvement. Comments please Legacy. -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com mailto:legacy-ornamental-mills%2bunsubscr...@googlegroups.com . To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills?hl=en. For more options, visit https://groups.google.com/groups/opt_out. -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com mailto:legacy-ornamental-mills%2bunsubscr...@googlegroups.com . To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills?hl=en. For more options, visit https://groups.google.com/groups/opt_out. -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com mailto:legacy-ornamental-mills%2bunsubscr...@googlegroups.com . To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills?hl=en. For more options, visit https://groups.google.com/groups/opt_out. -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills?hl=en. For more options, visit https://groups.google.com/groups/opt_out. No virus found in this message. Checked by AVG - www.avg.com Version: 2013.0.2897 / Virus Database: 2639/6070 - Release Date: 01/31/13 _ No virus found in this message. Checked by AVG - www.avg.com Version: 2013.0.2897 / Virus Database: 2639/6076 - Release Date: 02/02/13 -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr
Re: Question for Legacy Chat 2-5-2013
Wow !!! do l ever agree with that. On 2013-02-02, at 8:02 PM, Bill Bulkeley bulke...@mmnet.com.au wrote: How about asking if legacy could post some projects for the manual owners like they used to before the cnc mills arrived Bill From: legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Cole Andrews Sent: Sunday, 3 February 2013 11:45 AM To: legacy-ornamental-mills@googlegroups.com Subject: Re: Question for Legacy Chat 2-5-2013 I agree ,maybe a lesson on technique like Brandon just went through would be good. That would cut a path across all of our manual machines. Has anyone figured out how to tape it , I will be traveling. On Feb 2, 2013 7:18 PM, curt george curtgeo...@wowway.com wrote: Hello everyone. Question #2 is a hard ball type of question. Stating that Legacy as a company has some faults is nothing new. but I feel this question may not be the best way to get things started off. We want Legacy to start stepping up to the plate,(so to speak) with the Owners of there older equipment,We are being left out,and not being treated as customers in the way we deserve. But BY pointing out the turd in the toilet bowl may not be the best way to do this. ;-) Just a note to think about. C.A.G. - Original Message - From: Ron Taylor To: legacy-ornamental-mills@googlegroups.com Sent: Saturday, February 02, 2013 5:29 PM Subject: Re: Question for Legacy Chat 2-5-2013 On Fri, Feb 1, 2013 at 11:47 AM, Tim Krause artmarb...@comcast.net wrote: There is only one question at the moment for Legacy. Please add them to this thread ASAP. Question 1: What parts, component assemblies, and accessories do the Evolution and our (legacy) manual mills share/have in common. (Even talking nuts, bolts, and bearings here.) I want to know what parts accessories on/for the Evo will work on my LOM 1000/1200. Question 2. Some time ago I wanted to purchase a Legacy cnc (type undetermined) but was put off by the fact that support for the manual machines was so poor, as demonstrated by the amount of complaints I seemed to see from our members. There seems to have been a constant dribble of this to the extent we have relied on support from within our group rather than from Legacy. I have shelved any intentions of purchasing any further high dollar items from them until I can see a definite improvement. Comments please Legacy. -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills?hl=en. For more options, visit https://groups.google.com/groups/opt_out. -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills?hl=en. For more options, visit https://groups.google.com/groups/opt_out. -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills?hl=en. For more options, visit https://groups.google.com/groups/opt_out. -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills?hl=en. For more options, visit https://groups.google.com/groups/opt_out. No virus found in this message. Checked by AVG - www.avg.com Version: 2013.0.2897 / Virus Database: 2639/6070 - Release Date: 01/31/13 No virus found in this message. Checked by AVG - www.avg.com Version: 2013.0.2897 / Virus Database: 2639/6076 - Release Date: 02/02/13 -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com
Re: Question for Legacy Chat 2-5-2013
Hey folks, just remember we are visible and articulate at most of the woodworking shows and on the internet. I appreciate all the work done by our members in trying to gain some form of support from Legacy, but keep in mind we are not asking for something over and above what is reasonable, but only what should be EXPECTED from any company supplying high cost equipment to the general public. PLEASE don't be seduced into believing we are asking for anything more than is reasonable!! On Sat, Feb 2, 2013 at 6:44 PM, Cole Andrews coleandrew...@gmail.comwrote: I agree ,maybe a lesson on technique like Brandon just went through would be good. That would cut a path across all of our manual machines. Has anyone figured out how to tape it , I will be traveling. On Feb 2, 2013 7:18 PM, curt george curtgeo...@wowway.com wrote: ** Hello everyone. Question #2 is a hard ball type of question. Stating that Legacy as a company has some faults is nothing new. but I feel this question may not be the best way to get things started off. We want Legacy to start stepping up to the plate,(so to speak) with the Owners of there older equipment,We are being left out,and not being treated as customers in the way we deserve. But BY pointing out the turd in the toilet bowl may not be the best way to do this. ;-) Just a note to think about. C.A.G. - Original Message - *From:* Ron Taylor rontaylor1...@gmail.com *To:* legacy-ornamental-mills@googlegroups.com *Sent:* Saturday, February 02, 2013 5:29 PM *Subject:* Re: Question for Legacy Chat 2-5-2013 On Fri, Feb 1, 2013 at 11:47 AM, Tim Krause artmarb...@comcast.netwrote: ** There is only one question at the moment for Legacy. Please add them to this thread ASAP. Question 1: What parts, component assemblies, and accessories do the Evo*lution*and our (legacy) manual mills share/have in common. (Even talking nuts,bolts, and bearings here.) I want to know what parts accessories on/for the Evo will work on my LOM 1000/1200. Question 2. Some time ago I wanted to purchase a Legacy cnc (type undetermined) but was put off by the fact that support for the manual machines was so poor, as demonstrated by the amount of complaints I seemed to see from our members. There seems to have been a constant dribble of this to the extent we have relied on support from within our group rather than from Legacy. I have shelved any intentions of purchasing any further high dollar items from them until I can see a definite improvement. Comments please Legacy. -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills?hl=en. For more options, visit https://groups.google.com/groups/opt_out. -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills?hl=en. For more options, visit https://groups.google.com/groups/opt_out. -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills?hl=en. For more options, visit https://groups.google.com/groups/opt_out. -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills?hl=en. For more options, visit https://groups.google.com/groups/opt_out. -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills?hl=en. For more options, visit https://groups.google.com/groups/opt_out.
Re: Question for Legacy Chat 2-5-2013
Hello Everyone. not meaning to change the subject. but I just tried to regester for this class. Its not on the listing. Am I looking in the wrong place? https://legacycnc.webex.com/mw0307l/mywebex/default.do?siteurl=legacycnc C.A.G. - Original Message - From: Tim Krause To: legacy-ornamental-mills@googlegroups.com Sent: Saturday, February 02, 2013 8:49 PM Subject: Re: Question for Legacy Chat 2-5-2013 Ron, would you like to reword this question? John, I KNOW what you are saying, but I'm not going to censor the questions. I also know Andy is receiving the messages from this group in his email so it's really to late. To All, It was pointed out on Friday via my private email that all the questions need to be in on Friday. I submitted the single question that I had at the time (Mac's compatibility question). I'm hoping that the event will not be canceled because of lack of participation. Has everyone signed up yet. Pre-registration is required and that could show our interest level is sincere. -Tim - Original Message - From: John Hennen To: legacy-ornamental-mills@googlegroups.com Sent: Saturday, February 02, 2013 4:33 PM Subject: Re: Question for Legacy Chat 2-5-2013 It is a fair question. Andy will be there to answer these questions, however I would recommend rewording it to sound a little less rash. You all should thank Stan for putting himself out there to set this up and think about questions with this in mind. As I said, it is a fair question but I would have Tim reword that before he sends it to Andy and Tracy. Just thoughts from the one that pushed to make this Q A session from inside. John -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills?hl=en. For more options, visit https://groups.google.com/groups/opt_out. -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills?hl=en. For more options, visit https://groups.google.com/groups/opt_out. -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills?hl=en. For more options, visit https://groups.google.com/groups/opt_out.
Re: Question for Legacy Chat 2-5-2013
NO your not missing it. See below. Here is how to join in. Go to Legacycncwoodworking.com. Under CNC101 you will find On-line Training . Click on that and you will see Steps 1, 2 and 3. The first step has a tutorial by Tracy on how to use the WebEx system and get it set up on your computer. Step 2 will take you to a WebEx list of events. Our event is not listed yet but will be in time for the meeting. You will not need an access code. Step 3 is your registration page. Please go through these steps today or as soon as you can. If you have a problem, please email or call John at Legacy for help. There is a calendar of events but our event will not show up there. It will be on the WebEx list of events (Step 2) and you will click on it there to join in. - Original Message - From: curt george To: legacy-ornamental-mills@googlegroups.com Sent: Saturday, February 02, 2013 6:05 PM Subject: Re: Question for Legacy Chat 2-5-2013 Hello Everyone. not meaning to change the subject. but I just tried to regester for this class. Its not on the listing. Am I looking in the wrong place? https://legacycnc.webex.com/mw0307l/mywebex/default.do?siteurl=legacycnc C.A.G. - Original Message - From: Tim Krause To: legacy-ornamental-mills@googlegroups.com Sent: Saturday, February 02, 2013 8:49 PM Subject: Re: Question for Legacy Chat 2-5-2013 Ron, would you like to reword this question? John, I KNOW what you are saying, but I'm not going to censor the questions. I also know Andy is receiving the messages from this group in his email so it's really to late. To All, It was pointed out on Friday via my private email that all the questions need to be in on Friday. I submitted the single question that I had at the time (Mac's compatibility question). I'm hoping that the event will not be canceled because of lack of participation. Has everyone signed up yet. Pre-registration is required and that could show our interest level is sincere. -Tim - Original Message - From: John Hennen To: legacy-ornamental-mills@googlegroups.com Sent: Saturday, February 02, 2013 4:33 PM Subject: Re: Question for Legacy Chat 2-5-2013 It is a fair question. Andy will be there to answer these questions, however I would recommend rewording it to sound a little less rash. You all should thank Stan for putting himself out there to set this up and think about questions with this in mind. As I said, it is a fair question but I would have Tim reword that before he sends it to Andy and Tracy. Just thoughts from the one that pushed to make this Q A session from inside. John -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills?hl=en. For more options, visit https://groups.google.com/groups/opt_out. -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills?hl=en. For more options, visit https://groups.google.com/groups/opt_out. -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills?hl=en. For more options, visit https://groups.google.com/groups/opt_out. -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills?hl=en. For more options, visit https://groups.google.com/groups/opt_out.
Re: Question for Legacy Chat 2-5-2013
Tim,I went there and watched Tracy's video. I also went to step 3 and provided my personal info. (Step 2 did not seem to be cooperating - I'll try again later.) Additionally, in the Remarks box I submitted the below: (Note, I do not think that I am actually signed up for ANY class/presentation they offer, but at least they have my comments that that is why I came to the CNC 101 website and submitted my info.)Here are the comments I submitted to Legacy:I want to sign up for the LOM "Legacy" Manual Machine discussion/seminar that is scheduled to be conducted on Tuesday 5 Feb 2013 from 1600 to 1700? MST.I am particularly interested in: 1. What components and accessories can I/we still purchase from Legacy Corp. that will work on the manual machines that we, the LOM Google Group members own (Models 900, 1000, 1200, 1500, etc)? You may also want to address what pieces, components, and accessories from the EVOlution are usable on our older machines.2. I'd like to see Legacy begin offering (re-offer?) on-line classes that are useful to the MANY manual LOM owners out here. Keep in mind that how you are perceived as treating the owners of your "less expensive" machines will affect the thoughts and purchasing decisions of future potential LOM buyers - for both the CNC's as well as the EVOlutions.3. Re-look at how you view the MANY manual Legacy owners. Evaluate the support you provide them and start treating them as potential future "converts" to a CNC machine - after-all, that should be their logical progression. However, if they have less than a pleasant Customer Service experience with Legacy over the manual machine they own, they may look elsewhere for a CNC mill when the "up-grade bug" bites them.Thank you in advance for your serious consideration of my above comments/suggestions.M W Foscue-Original Message- From: Tim Krause <artmarb...@comcast.net> Sent: Feb 2, 2013 9:30 PM To: legacy-ornamental-mills@googlegroups.com Subject: Re: Question for Legacy Chat 2-5-2013 NO your not missing it. See below. Here is how to join in. Go to Legacycncwoodworking.com. Under "CNC101" you will find "On-line Training" . Click on that and you will see Steps 1, 2 and 3. The first step has a tutorial by Tracy on how to use the WebEx system and get it set up on your computer. Step 2 will take you to a WebEx list of events. Our event is not listed yet but will be in time for the meeting. You will not need an access code. Step 3 is your registration page. Please go through these steps today or as soon as you can.If you have a problem, please email or call John at Legacy for help. There is a calendar of events but our eventwill notshow up there. It will be on the WebEx list of events (Step 2) and you will click on it there to join in. - Original Message - From: curt george To: legacy-ornamental-mills@googlegroups.com Sent: Saturday, February 02, 2013 6:05 PM Subject: Re: Question for Legacy Chat 2-5-2013 Hello Everyone. not meaning to change the subject. but I just tried to regester for this class. Its not on the listing. Am I looking in the wrong place? https://legacycnc.webex.com/mw0307l/mywebex/default.do?siteurl=legacycnc C.A.G. - Original Message - From: Tim Krause To: legacy-ornamental-mills@googlegroups.com Sent: Saturday, February 02, 2013 8:49 PM Subject: Re: Question for Legacy Chat 2-5-2013 Ron, would you like to reword this question? John, I KNOW what you are saying, but I'm not going to censor the questions. I also know Andy is receiving the messages from this group in his email so it's really to late. To All, It waspointed out onFriday via my private email that all the questions need to be in on Friday.I submitted the single question that I had at the time (Mac's compatibility question). I'm hoping that the event will not be canceled because of lack of participation. Has everyone signed up yet. Pre-registration is required and that could show our interest level is sincere. -Tim - Original Message - From: John Hennen To: legacy-ornamental-mills@googlegroups.com Sent: Saturday, February 02, 2013 4:33 PM Subject: Re: Question for Legacy Chat 2-5-2013 It is a fair question. Andy will be there to answer these questions, however I would recommend rewording it to sound a little less rash. You all should thank Stan for putting himself out there to set this up and think about questions with this in mind. As I said, it is a fair question but I would have Tim reword that before he sends it to Andy and Tracy. Just thoughts from the one that pushed to make this Q A session from inside.