Re: Quicky Christmas present

2023-11-12 Thread Tim Ziegler 
Yeah we should call it Santa's shop this time of the year for Curt. lol.

Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
Ziegler Laser Worx LLC
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Sun, Nov 12, 2023 at 5:02 PM cdkr...@gmail.com 
wrote:

> Good work, Curt.
> DanK
>
>
> On Sunday, November 12, 2023 at 4:04:56 PM UTC-5 Curt George wrote:
>
>> The pix show the story.
>> #1.  Ace hardware store mag. glasses (Note price tag.)
>> #2 .drilling out wood for the metal incert
>> #3 . Incert glued into place.
>> #4 . Legacy drive hub installed.
>> #5 . part made. (in the rough.)
>> #6 . cleaning up and filling in the cracks and void.
>> #7 . glass put on for size adjustment.
>> #8 . glass removed and sanding and polishing started.
>> #9 . final product, (except, the cutting off of the waist materials.)
>> #10 .NOT Shown. (I'm not sure, I'm done yet? I still may add some
>> details, so photo #10 has not been taken yet.)  ;-)
>>
>> Have a good day everyone.
>>
>> C.A.G.
>>
>> On Sunday, November 12, 2023 at 03:49:41 PM EST, Curt George <
>> curt@yahoo.com> wrote:
>>
>>
>> Woops! hit the wrong button. ;-p
>>
>> I was asked for a more detailed step by step directions on this topic.
>> So here are a number of photos.
>>
>> C.A.G.
>>
>> P.S. There are 10 photo's  So I will be posting two e-mails to cover the
>> hole topic.
>>
>> On Sunday, November 12, 2023 at 03:45:16 PM EST, 'Curt George' via Legacy
>> Ornamental Mills  wrote:
>>
>>
>> Hello
>>
>> On Friday, November 10, 2023 at 7:59:58 PM UTC-5 Curt George wrote:
>>
>> Hello Everyone.
>>
>> I have the day off form work, So I have started making Christmas presents
>> again.
>> For those older (long term) members, you should remember that a few years
>> back I made 64 magnifying glasses. (I don't plan to make that many this
>> year, but I do plan to make a few, Here is the first one of the season.)
>>
>> These glasses are cheap to buy, under $3.00 at the local hardware store.
>> they have plastic handles.
>> I remove to handle and then use the metal shank (?)(for no better words?
>> The metal part that hold the glass to the handle.) I put it in a wood block
>> and then used that part in my tail rest to center the part/handle, then I
>> turn it on the my lathe and then finish it off on my Legacy.
>>
>> "Well" here is what I made today.
>> any question or comments are, as always Welcome.
>>
>> C.A.G.
>>
>> --
>> You received this message because you are subscribed to the Google Groups
>> "Legacy Ornamental Mills" group.
>> To unsubscribe from this group and stop receiving emails from it, send an
>> email to legacy-ornamental...@googlegroups.com.
>> To view this discussion on the web visit
>> https://groups.google.com/d/msgid/legacy-ornamental-mills/a4b4d5e6-b5e9-4d21-a025-51ed6b0bd301n%40googlegroups.com
>> 
>> .
>>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/3bae76ed-4d3e-47bd-9b5b-5bdafab64469n%40googlegroups.com
> 
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLFBn1SZO1w0nc87mG0JBwKMjAaVSzOkGfad999ACfv7MQ%40mail.gmail.com.

Re: Quicky Christmas present

2023-11-12 Thread Tim Ziegler 
good stuff Curt thanks
Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
Ziegler Laser Worx LLC
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Sun, Nov 12, 2023 at 3:04 PM 'Curt George' via Legacy Ornamental Mills <
legacy-ornamental-mills@googlegroups.com> wrote:

> The pix show the story.
> #1.  Ace hardware store mag. glasses (Note price tag.)
> #2 .drilling out wood for the metal incert
> #3 . Incert glued into place.
> #4 . Legacy drive hub installed.
> #5 . part made. (in the rough.)
> #6 . cleaning up and filling in the cracks and void.
> #7 . glass put on for size adjustment.
> #8 . glass removed and sanding and polishing started.
> #9 . final product, (except, the cutting off of the waist materials.)
> #10 .NOT Shown. (I'm not sure, I'm done yet? I still may add some
> details, so photo #10 has not been taken yet.)  ;-)
>
> Have a good day everyone.
>
> C.A.G.
>
> On Sunday, November 12, 2023 at 03:49:41 PM EST, Curt George <
> curt.geo...@yahoo.com> wrote:
>
>
> Woops! hit the wrong button. ;-p
>
> I was asked for a more detailed step by step directions on this topic.
> So here are a number of photos.
>
> C.A.G.
>
> P.S. There are 10 photo's  So I will be posting two e-mails to cover the
> hole topic.
>
> On Sunday, November 12, 2023 at 03:45:16 PM EST, 'Curt George' via Legacy
> Ornamental Mills  wrote:
>
>
> Hello
>
> On Friday, November 10, 2023 at 7:59:58 PM UTC-5 Curt George wrote:
>
> Hello Everyone.
>
> I have the day off form work, So I have started making Christmas presents
> again.
> For those older (long term) members, you should remember that a few years
> back I made 64 magnifying glasses. (I don't plan to make that many this
> year, but I do plan to make a few, Here is the first one of the season.)
>
> These glasses are cheap to buy, under $3.00 at the local hardware store.
> they have plastic handles.
> I remove to handle and then use the metal shank (?)(for no better words?
> The metal part that hold the glass to the handle.) I put it in a wood block
> and then used that part in my tail rest to center the part/handle, then I
> turn it on the my lathe and then finish it off on my Legacy.
>
> "Well" here is what I made today.
> any question or comments are, as always Welcome.
>
> C.A.G.
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/a4b4d5e6-b5e9-4d21-a025-51ed6b0bd301n%40googlegroups.com
> 
> .
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/729007293.1423980.1699823082882%40mail.yahoo.com
> 
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLGE_MK2Jnuv8SO%2Bqr1GFYh%3DxXc_kX95i9PSk_ad9w%2BwDA%40mail.gmail.com.

Re: Quicky Christmas present

2023-11-12 Thread Tim Ziegler 
Great thanks Curt.

Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
Ziegler Laser Worx LLC
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Sun, Nov 12, 2023 at 2:50 PM 'Curt George' via Legacy Ornamental Mills <
legacy-ornamental-mills@googlegroups.com> wrote:

> Woops! hit the wrong button. ;-p
>
> I was asked for a more detailed step by step directions on this topic.
> So here are a number of photos.
>
> C.A.G.
>
> P.S. There are 10 photo's  So I will be posting two e-mails to cover the
> hole topic.
>
> On Sunday, November 12, 2023 at 03:45:16 PM EST, 'Curt George' via Legacy
> Ornamental Mills  wrote:
>
>
> Hello
>
> On Friday, November 10, 2023 at 7:59:58 PM UTC-5 Curt George wrote:
>
> Hello Everyone.
>
> I have the day off form work, So I have started making Christmas presents
> again.
> For those older (long term) members, you should remember that a few years
> back I made 64 magnifying glasses. (I don't plan to make that many this
> year, but I do plan to make a few, Here is the first one of the season.)
>
> These glasses are cheap to buy, under $3.00 at the local hardware store.
> they have plastic handles.
> I remove to handle and then use the metal shank (?)(for no better words?
> The metal part that hold the glass to the handle.) I put it in a wood block
> and then used that part in my tail rest to center the part/handle, then I
> turn it on the my lathe and then finish it off on my Legacy.
>
> "Well" here is what I made today.
> any question or comments are, as always Welcome.
>
> C.A.G.
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/a4b4d5e6-b5e9-4d21-a025-51ed6b0bd301n%40googlegroups.com
> 
> .
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/1600378359.1414559.1699822179357%40mail.yahoo.com
> 
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLG6v2DpWHrzQ_By0dL%3DiyaK%3DFdZ5yF0k7mGPOZmfNu1Zg%40mail.gmail.com.

Re: Quicky Christmas present

2023-11-12 Thread cdkr...@gmail.com 
Good work, Curt.
DanK


On Sunday, November 12, 2023 at 4:04:56 PM UTC-5 Curt George wrote:

> The pix show the story. 
> #1.  Ace hardware store mag. glasses (Note price tag.)
> #2 .drilling out wood for the metal incert
> #3 . Incert glued into place.
> #4 . Legacy drive hub installed.
> #5 . part made. (in the rough.)
> #6 . cleaning up and filling in the cracks and void.
> #7 . glass put on for size adjustment.
> #8 . glass removed and sanding and polishing started.
> #9 . final product, (except, the cutting off of the waist materials.)
> #10 .NOT Shown. (I'm not sure, I'm done yet? I still may add some 
> details, so photo #10 has not been taken yet.)  ;-)
>
> Have a good day everyone.
>
> C.A.G.
>
> On Sunday, November 12, 2023 at 03:49:41 PM EST, Curt George <
> curt@yahoo.com> wrote: 
>
>
> Woops! hit the wrong button. ;-p
>
> I was asked for a more detailed step by step directions on this topic.
> So here are a number of photos.
>
> C.A.G.
>
> P.S. There are 10 photo's  So I will be posting two e-mails to cover the 
> hole topic.
>
> On Sunday, November 12, 2023 at 03:45:16 PM EST, 'Curt George' via Legacy 
> Ornamental Mills  wrote: 
>
>
> Hello
>
> On Friday, November 10, 2023 at 7:59:58 PM UTC-5 Curt George wrote:
>
> Hello Everyone.
>
> I have the day off form work, So I have started making Christmas presents 
> again.
> For those older (long term) members, you should remember that a few years 
> back I made 64 magnifying glasses. (I don't plan to make that many this 
> year, but I do plan to make a few, Here is the first one of the season.) 
>
> These glasses are cheap to buy, under $3.00 at the local hardware store. 
> they have plastic handles.
> I remove to handle and then use the metal shank (?)(for no better words? 
> The metal part that hold the glass to the handle.) I put it in a wood block 
> and then used that part in my tail rest to center the part/handle, then I 
> turn it on the my lathe and then finish it off on my Legacy.
>
> "Well" here is what I made today.
> any question or comments are, as always Welcome.
>
> C.A.G.
>
> -- 
> You received this message because you are subscribed to the Google Groups 
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an 
> email to legacy-ornamental...@googlegroups.com.
> To view this discussion on the web visit 
> https://groups.google.com/d/msgid/legacy-ornamental-mills/a4b4d5e6-b5e9-4d21-a025-51ed6b0bd301n%40googlegroups.com
>  
> 
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/3bae76ed-4d3e-47bd-9b5b-5bdafab64469n%40googlegroups.com.

Re: Quicky Christmas present

2023-11-12 Thread 'Curt George' via Legacy Ornamental Mills 
Hello

On Friday, November 10, 2023 at 7:59:58 PM UTC-5 Curt George wrote:

> Hello Everyone.
>
> I have the day off form work, So I have started making Christmas presents 
> again.
> For those older (long term) members, you should remember that a few years 
> back I made 64 magnifying glasses. (I don't plan to make that many this 
> year, but I do plan to make a few, Here is the first one of the season.) 
>
> These glasses are cheap to buy, under $3.00 at the local hardware store. 
> they have plastic handles.
> I remove to handle and then use the metal shank (?)(for no better words? 
> The metal part that hold the glass to the handle.) I put it in a wood block 
> and then used that part in my tail rest to center the part/handle, then I 
> turn it on the my lathe and then finish it off on my Legacy.
>
> "Well" here is what I made today.
> any question or comments are, as always Welcome.
>
> C.A.G.
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/a4b4d5e6-b5e9-4d21-a025-51ed6b0bd301n%40googlegroups.com.

Re: Quicky Christmas present

2023-11-11 Thread Tim Ziegler 
Thanks Curt. Yes its very nice work. Again I need to slow down and play
again.
Maybe tomorrow we spent most of today re-organizing in the laser room.

Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
Ziegler Laser Worx LLC
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Sat, Nov 11, 2023 at 4:32 PM 'Curt George' via Legacy Ornamental Mills <
legacy-ornamental-mills@googlegroups.com> wrote:

> Hello Tim
>
> I used my lathe and the 200 to make this handle.
>
> Here is a pix. of what I have left, the center glass is the new one, and
> what was left from last years Santa's workshop.
> I have 3 more glasses to make out of wood, and then on to the bone
> turning.  ;-)
>
> C.A.G.
>
> On Saturday, November 11, 2023 at 05:24:36 PM EST, Tim Ziegler <
> timjzieg...@gmail.com> wrote:
>
>
> very nice. Did you do them on the 200 or your 1000? or do you have the
> 1500? i forget
> Kind Regards,
>
> Timothy J. Ziegler
> Ziegler WoodWork & Specialty
> Ziegler Laser Worx LLC
> 14171 160th Ave.
> Foreston MN 56330
>
> 320-294-5798 shop
> 320-630-2243 cell
>
>
> On Fri, Nov 10, 2023 at 6:59 PM 'Curt George' via Legacy Ornamental Mills <
> legacy-ornamental-mills@googlegroups.com> wrote:
>
> Hello Everyone.
>
> I have the day off form work, So I have started making Christmas presents
> again.
> For those older (long term) members, you should remember that a few years
> back I made 64 magnifying glasses. (I don't plan to make that many this
> year, but I do plan to make a few, Here is the first one of the season.)
>
> These glasses are cheap to buy, under $3.00 at the local hardware store.
> they have plastic handles.
> I remove to handle and then use the metal shank (?)(for no better words?
> The metal part that hold the glass to the handle.) I put it in a wood block
> and then used that part in my tail rest to center the part/handle, then I
> turn it on the my lathe and then finish it off on my Legacy.
>
> "Well" here is what I made today.
> any question or comments are, as always Welcome.
>
> C.A.G.
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/2077572714.1189876.1699664327369%40mail.yahoo.com
> 
> .
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLE-5ViJuntptj0QyjbN8sKMXJGhUit1cZwCu0J_sX3J3g%40mail.gmail.com
> 
> .
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/1600511945.1311016.1699741966295%40mail.yahoo.com
> 
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLG_dHnD8j5feQjps9gFMyaFkt49%3DbWBduoWjjinhgOGAA%40mail.gmail.com.

Re: Quicky Christmas present

2023-11-11 Thread Tim Ziegler 
very nice. Did you do them on the 200 or your 1000? or do you have the
1500? i forget
Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
Ziegler Laser Worx LLC
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Fri, Nov 10, 2023 at 6:59 PM 'Curt George' via Legacy Ornamental Mills <
legacy-ornamental-mills@googlegroups.com> wrote:

> Hello Everyone.
>
> I have the day off form work, So I have started making Christmas presents
> again.
> For those older (long term) members, you should remember that a few years
> back I made 64 magnifying glasses. (I don't plan to make that many this
> year, but I do plan to make a few, Here is the first one of the season.)
>
> These glasses are cheap to buy, under $3.00 at the local hardware store.
> they have plastic handles.
> I remove to handle and then use the metal shank (?)(for no better words?
> The metal part that hold the glass to the handle.) I put it in a wood block
> and then used that part in my tail rest to center the part/handle, then I
> turn it on the my lathe and then finish it off on my Legacy.
>
> "Well" here is what I made today.
> any question or comments are, as always Welcome.
>
> C.A.G.
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/2077572714.1189876.1699664327369%40mail.yahoo.com
> 
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLE-5ViJuntptj0QyjbN8sKMXJGhUit1cZwCu0J_sX3J3g%40mail.gmail.com.

Re: Quicky Christmas present

2023-11-11 Thread Jeff Richmond 
Nice work Curt, definitely an improvement over the original purchase 👍Jeff from connect Sent from my iPhoneOn Nov 10, 2023, at 7:59 PM, 'Curt George' via Legacy Ornamental Mills  wrote:Hello Everyone.I have the day off form work, So I have started making Christmas presents again.For those older (long term) members, you should remember that a few years back I made 64 magnifying glasses. (I don't plan to make that many this year, but I do plan to make a few, Here is the first one of the season.) These glasses are cheap to buy, under $3.00 at the local hardware store. they have plastic handles.I remove to handle and then use the metal shank (?)(for no better words? The metal part that hold the glass to the handle.) I put it in a wood block and then used that part in my tail rest to center the part/handle, then I turn it on the my lathe and then finish it off on my Legacy."Well" here is what I made today.any question or comments are, as always Welcome.C.A.G.



-- 
You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/2077572714.1189876.1699664327369%40mail.yahoo.com.




-- 
You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/C83AF8DB-F0C4-48CC-B262-26F4935E86A2%40gmail.com.

Re: Quicky Christmas present

2023-11-10 Thread M.W.Foscue 
Curtis,

Very nice - Thanks for sharing.
Is the lens glass or acrylic (plastic)?

I'm sure there are some "bone" handles in the making.
LoL!
Mac
-Original Message-
From: 
Sent: Nov 10, 2023 8:07 PM
To: Legacy ornamental mills 
Subject: Quicky Christmas present

Hello Everyone.
 
I have the day off form work, So I have started making Christmas presents again.
For those older (long term) members, you should remember that a few years back 
I made 64 magnifying glasses. (I don't plan to make that many this year, but I 
do plan to make a few, Here is the first one of the season.) 
 
These glasses are cheap to buy, under $3.00 at the local hardware store. they 
have plastic handles.
I remove to handle and then use the metal shank (?)(for no better words? The 
metal part that hold the glass to the handle.) I put it in a wood block and 
then used that part in my tail rest to center the part/handle, then I turn it 
on the my lathe and then finish it off on my Legacy.
 
"Well" here is what I made today.
any question or comments are, as always Welcome.
 
C.A.G.


-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/d38d57e6-dccb-6406-9a35-62d1c2394523%40earthlink.net.

Re: Quicky Christmas present

2023-11-10 Thread 'Curt George' via Legacy Ornamental Mills 
 Hey Bill
I have plenty of bone setting up at this time.  If all goes well, I should be 
able to start turning some more in the very near future.I have 3 days off this 
weekend, One side job left to work. (appx. 6hrs.) and thenmy free time will be 
mine again. ;-)
Thanks for the kind words Bill. If you or anyone has any new ideas on designs 
and or patterns, Please post some pix.of them. At this point it doesn't matter 
who made them, Ideas and Dreams are what I am chasing at this time. ;-)talk to 
you all more latter.
C.A.G.
On Friday, November 10, 2023 at 08:27:03 PM EST,  
wrote:  
 
 
As always nice work will anyone going get bone handle ones?

  

Bill 

  

  

From: 'Curt George' via Legacy Ornamental Mills 
 
Sent: Saturday, November 11, 2023 11:59 AM
To: Legacy ornamental mills 
Subject: Quicky Christmas present

  

Hello Everyone.

  

I have the day off form work, So I have started making Christmas presents again.

For those older (long term) members, you should remember that a few years back 
I made 64 magnifying glasses. (I don't plan to make that many this year, but I 
do plan to make a few, Here is the first one of the season.) 

  

These glasses are cheap to buy, under $3.00 at the local hardware store. they 
have plastic handles.

I remove to handle and then use the metal shank (?)(for no better words? The 
metal part that hold the glass to the handle.) I put it in a wood block and 
then used that part in my tail rest to center the part/handle, then I turn it 
on the my lathe and then finish it off on my Legacy.

  

"Well" here is what I made today.

any question or comments are, as always Welcome.

  

C.A.G.

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/2077572714.1189876.1699664327369%40mail.yahoo.com.


-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/001501da143e%242604d630%24720e8290%24%40mmnet.com.au.
  

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/1360167614.1207663.1699669528825%40mail.yahoo.com.

RE: Quicky Christmas present

2023-11-10 Thread bulkeley 
As always nice work will anyone going get bone handle ones?

 

Bill 

 

 

From: 'Curt George' via Legacy Ornamental Mills 
 
Sent: Saturday, November 11, 2023 11:59 AM
To: Legacy ornamental mills 
Subject: Quicky Christmas present

 

Hello Everyone.

 

I have the day off form work, So I have started making Christmas presents again.

For those older (long term) members, you should remember that a few years back 
I made 64 magnifying glasses. (I don't plan to make that many this year, but I 
do plan to make a few, Here is the first one of the season.) 

 

These glasses are cheap to buy, under $3.00 at the local hardware store. they 
have plastic handles.

I remove to handle and then use the metal shank (?)(for no better words? The 
metal part that hold the glass to the handle.) I put it in a wood block and 
then used that part in my tail rest to center the part/handle, then I turn it 
on the my lathe and then finish it off on my Legacy.

 

"Well" here is what I made today.

any question or comments are, as always Welcome.

 

C.A.G.

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
 .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/2077572714.1189876.1699664327369%40mail.yahoo.com
 

 .

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/001501da143e%242604d630%24720e8290%24%40mmnet.com.au.