RE: vacuum flask blank

2022-01-25 Thread bulkeley 
Of course it stays cold all day with feet of snow outside lol just kidding Tim

Are the tumblers your talking about double skinned for better insulation?

 

Bill  

 

From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of Tim Ziegler
Sent: Tuesday, 25 January 2022 10:58 PM
To: LOM Group 
Subject: Re: vacuum flask blank

 

Depends on the tumblers we have some that keep Ice in my water cup cold all day 
if I forget to drink it lol. 

Your screen pic did not show up Mac?



Kind Regards,

 

Timothy J. Ziegler

Ziegler WoodWork & Specialty

14171 160th Ave.

Foreston MN 56330

 

320-294-5798 shop

320-630-2243 cell

 

 

On Mon, Jan 24, 2022 at 10:20 PM M.W.Foscue mailto:mwfos...@earthlink.net> > wrote:

Bill,

I attached a screen grab of what we, here, call a flask.

Front to back it is only about 1". Usually only about 4 to 6 inches tall, if 
that;and about 4" wide.

They were designed to allow one to "sneak" alcohol into venues when alcohol was 
not allowed - and later when alcohol got expensive.

 

The tumblers you & I have been describing are esentially worthless for what you 
and I want them for - keep our beverage hot or cold.  If you have a non-vacuum 
tumbler, you may as well use a Red Dixie Cup!

 

Cheers!

Mac


  _  


  _  


-Original Message-
From: mailto:legacy-ornamental-mills@googlegroups.com> >
Sent: Jan 24, 2022 11:02 PM
To: mailto:legacy-ornamental-mills@googlegroups.com> >
Subject: RE: vacuum flask blank

 

I can buy the rockler one here I don’t like it much wont hold the heat or the 
cold in that’s why I want a vacuum tumbler as you call it we say flask.

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
<mailto:legacy-ornamental-mills@googlegroups.com>  
mailto:legacy-ornamental-mills@googlegroups.com> > On Behalf Of M.W.Foscue
Sent: Tuesday, 25 January 2022 2:45 PM
To: legacy-ornamental-mills@googlegroups.com 
<mailto:legacy-ornamental-mills@googlegroups.com> 
Subject: Re: vacuum flask blank

 

Bill,

 

Woodcraft used to sell them as a "kit".  Hads a stainless inner "liner" and a 
prepared wood "sleeve" that you'd sand, stain, finish, and assemble. 

Note: Pretty sure it was NOT a vacuum tumbler - so wasn't much good for keeping 
hot stuff hot and cold stuff cold. 

 

I think I saw them in a sale around Black Friday - in a "Clearance" sale?  So 
they may not have them anymore.

 

In any case check Woodcraft, Rockler, Woodworkers' Supply, and others.

Mac

  _  

  _  

-Original Message-
From: mailto:legacy-ornamental-mills@googlegroups.com> >
Sent: Jan 24, 2022 10:21 PM
To: LOM Group mailto:legacy-ornamental-mills@googlegroups.com> >
Subject: Re: vacuum flask blank

 

Boy not sure  on that one Bill. We can get tumbler's to engrave but not aware 
of 

blanks to turn. 

 

Kind Regards,

 

Timothy J. Ziegler

Ziegler WoodWork & Specialty

14171 160th Ave.

Foreston MN 56330

 

320-294-5798 shop

320-630-2243 cell

 

On Mon, Jan 24, 2022 at 9:11 PM mailto:bulke...@mmnet.com.au> > wrote:

Ok guys is there such a thing out there as a vacuum flask blank

To turn or mill up a wooden vacuum flask like you can get

For making a wood travel mug I been looking and I cant find anything maybe 

Such a thing does not exist what do you all think?

 

Bill

 

 

 

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
<mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/000501d81198%249fc18270%24df448750%24%40mmnet.com.au
 
<https://groups.google.com/d/msgid/legacy-ornamental-mills/000501d81198%249fc18270%24df448750%24%40mmnet.com.au?utm_medium=email&utm_source=footer>
 .

 

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
<mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLEsdkCCg-Nisb6Lpjj40%3DN4djMkivdm0s3fgDFFo8x7ug%40mail.gmail.com
 
<https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLEsdkCCg-Nisb6Lpjj40%3DN4djMkivdm0s3fgDFFo8x7ug%40mail.gmail.com?utm_medium=email&utm_source=footer>
 .

 

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-or

RE: vacuum flask blank

2022-01-25 Thread bulkeley 
19 below man what do you do put food in the freezer to warm it up that is soo 
cold

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of Tim Ziegler
Sent: Tuesday, 25 January 2022 10:57 PM
To: LOM Group 
Subject: Re: vacuum flask blank

 

Yeah current temp as of 6:00 am is negative 19 below and dropping. Tonight its 
going to be colder. 

Good old Minnesota January. Coffee weather for sure. yes lets let those 
tumblers (Flasks) made. 


Kind Regards,

 

Timothy J. Ziegler

Ziegler WoodWork & Specialty

14171 160th Ave.

Foreston MN 56330

 

320-294-5798 shop

320-630-2243 cell

 

 

On Mon, Jan 24, 2022 at 10:09 PM M.W.Foscue mailto:mwfos...@earthlink.net> > wrote:

 

Bill,

 

Ya better have some good Aquavit - like Aalborg's - to put in that coffee or 
you'll FREEZE to death in Tim's neck of the woods right now! It is 6º F below 
Zero right now (- 6ºF)!   🥶

 

LoL!

Mac


  _  


-Original Message-
From: mailto:legacy-ornamental-mills@googlegroups.com> >
Sent: Jan 24, 2022 10:47 PM
To: mailto:legacy-ornamental-mills@googlegroups.com> >
Subject: RE: vacuum flask blank

 

Well the blank goes inside the wood you mill or turn, you know me I’m always 
making something different, imagine out ice fishing and you pull out your 
wooden spiralled vacuum flask and pour out a nice hot coffee 😊

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
mailto:legacy-ornamental-mills@googlegroups.com> > On Behalf Of Tim Ziegler
Sent: Tuesday, 25 January 2022 2:22 PM
To: LOM Group mailto:legacy-ornamental-mills@googlegroups.com> >
Subject: Re: vacuum flask blank

 

Boy not sure  on that one Bill. We can get tumbler's to engrave but not aware 
of 

blanks to turn. 

 

Kind Regards,

 

Timothy J. Ziegler

Ziegler WoodWork & Specialty

14171 160th Ave.

Foreston MN 56330

 

320-294-5798 shop

320-630-2243 cell

 

 

On Mon, Jan 24, 2022 at 9:11 PM mailto:bulke...@mmnet.com.au> > wrote:

Ok guys is there such a thing out there as a vacuum flask blank

To turn or mill up a wooden vacuum flask like you can get

For making a wood travel mug I been looking and I cant find anything maybe 

Such a thing does not exist what do you all think?

 

Bill

 

 

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
<mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/000501d81198%249fc18270%24df448750%24%40mmnet.com.au
 
<https://groups.google.com/d/msgid/legacy-ornamental-mills/000501d81198%249fc18270%24df448750%24%40mmnet.com.au?utm_medium=email&utm_source=footer>
 .

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
<mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLEsdkCCg-Nisb6Lpjj40%3DN4djMkivdm0s3fgDFFo8x7ug%40mail.gmail.com
 
<https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLEsdkCCg-Nisb6Lpjj40%3DN4djMkivdm0s3fgDFFo8x7ug%40mail.gmail.com?utm_medium=email&utm_source=footer>
 .

 

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
<mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/001b01d8119e%244eb417c0%24ec1c4740%24%40mmnet.com.au
 
<https://groups.google.com/d/msgid/legacy-ornamental-mills/001b01d8119e%244eb417c0%24ec1c4740%24%40mmnet.com.au?utm_medium=email&utm_source=footer>
 .

 

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
<mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/0ff5649c-2ac5-fa4d-8b7f-b7cde5a659ee%40earthlink.net
 
<https://groups.google.com/d/msgid/legacy-ornamental-mills/0ff5649c-2ac5-fa4d-8b7f-b7cde5a659ee%40earthlink.net?utm_medium=email&utm_source=footer>
 .

-- 
You received this message because you are subscribed to the Google Groups 
&

Re: vacuum flask blank

2022-01-25 Thread Tim Ziegler 
Depends on the tumblers we have some that keep Ice in my water cup cold all
day if I forget to drink it lol.
Your screen pic did not show up Mac?

Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Mon, Jan 24, 2022 at 10:20 PM M.W.Foscue  wrote:

> Bill,
>
> I attached a screen grab of what we, here, call a flask.
>
> Front to back it is only about 1". Usually only about 4 to 6 inches tall,
> if that;and about 4" wide.
>
> They were designed to allow one to "sneak" alcohol into venues when
> alcohol was not allowed - and later when alcohol got expensive.
>
>
>
> The tumblers you & I have been describing are esentially worthless for
> what you and I want them for - keep our beverage hot or cold.  If you have
> a non-vacuum tumbler, you may as well use a Red Dixie Cup!
>
>
>
> Cheers!
>
> Mac
> --
> ------
>
> -----Original Message-
> From: 
> Sent: Jan 24, 2022 11:02 PM
> To: 
> Subject: RE: vacuum flask blank
>
>
>
> I can buy the rockler one here I don’t like it much wont hold the heat or
> the cold in that’s why I want a vacuum tumbler as you call it we say flask.
>
>
>
> Bill
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *M.W.Foscue
> *Sent:* Tuesday, 25 January 2022 2:45 PM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* Re: vacuum flask blank
>
>
>
> Bill,
>
>
>
> Woodcraft used to sell them as a "kit".  Hads a stainless inner "liner"
> and a prepared wood "sleeve" that you'd sand, stain, finish, and assemble.
>
> Note: Pretty sure it was NOT a vacuum tumbler - so wasn't much good for
> keeping hot stuff hot and cold stuff cold.
>
>
>
> I think I saw them in a sale around Black Friday - in a "Clearance" sale?
> So they may not have them anymore.
>
>
>
> In any case check Woodcraft, Rockler, Woodworkers' Supply, and others.
>
> Mac
> --
> --
>
> -Original Message-
> From: 
> Sent: Jan 24, 2022 10:21 PM
> To: LOM Group 
> Subject: Re: vacuum flask blank
>
>
>
> Boy not sure  on that one Bill. We can get tumbler's to engrave but not
> aware of
>
> blanks to turn.
>
>
>
> Kind Regards,
>
>
>
> Timothy J. Ziegler
>
> Ziegler WoodWork & Specialty
>
> 14171 160th Ave.
>
> Foreston MN 56330
>
>
>
> 320-294-5798 shop
>
> 320-630-2243 cell
>
>
>
> On Mon, Jan 24, 2022 at 9:11 PM  wrote:
>
> Ok guys is there such a thing out there as a vacuum flask blank
>
> To turn or mill up a wooden vacuum flask like you can get
>
> For making a wood travel mug I been looking and I cant find anything maybe
>
> Such a thing does not exist what do you all think?
>
>
>
> Bill
>
>
>
>
>
>
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/000501d81198%249fc18270%24df448750%24%40mmnet.com.au
> <https://groups.google.com/d/msgid/legacy-ornamental-mills/000501d81198%249fc18270%24df448750%24%40mmnet.com.au?utm_medium=email&utm_source=footer>
> .
>
>
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLEsdkCCg-Nisb6Lpjj40%3DN4djMkivdm0s3fgDFFo8x7ug%40mail.gmail.com
> <https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLEsdkCCg-Nisb6Lpjj40%3DN4djMkivdm0s3fgDFFo8x7ug%40mail.gmail.com?utm_medium=email&utm_source=footer>
> .
>
>
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/12eaa709-2

Re: vacuum flask blank

2022-01-25 Thread Tim Ziegler 
Yeah current temp as of 6:00 am is negative 19 below and dropping. Tonight
its going to be colder.
Good old Minnesota January. Coffee weather for sure. yes lets let those
tumblers (Flasks) made.
Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Mon, Jan 24, 2022 at 10:09 PM M.W.Foscue  wrote:

>
>
> Bill,
>
>
>
> Ya better have some good Aquavit - like Aalborg's - to put in that coffee
> or you'll FREEZE to death in Tim's neck of the woods right now! It is 6º F
> below Zero right now (- 6ºF)!   🥶
>
>
>
> LoL!
>
> Mac
> --
>
> -Original Message-
> From: 
> Sent: Jan 24, 2022 10:47 PM
> To: 
> Subject: RE: vacuum flask blank
>
>
>
> Well the blank goes inside the wood you mill or turn, you know me I’m
> always making something different, imagine out ice fishing and you pull out
> your wooden spiralled vacuum flask and pour out a nice hot coffee 😊
>
>
>
> Bill
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Tim Ziegler
> *Sent:* Tuesday, 25 January 2022 2:22 PM
> *To:* LOM Group 
> *Subject:* Re: vacuum flask blank
>
>
>
> Boy not sure  on that one Bill. We can get tumbler's to engrave but not
> aware of
>
> blanks to turn.
>
>
>
> Kind Regards,
>
>
>
> Timothy J. Ziegler
>
> Ziegler WoodWork & Specialty
>
> 14171 160th Ave.
>
> Foreston MN 56330
>
>
>
> 320-294-5798 shop
>
> 320-630-2243 cell
>
>
>
>
>
> On Mon, Jan 24, 2022 at 9:11 PM  wrote:
>
> Ok guys is there such a thing out there as a vacuum flask blank
>
> To turn or mill up a wooden vacuum flask like you can get
>
> For making a wood travel mug I been looking and I cant find anything maybe
>
> Such a thing does not exist what do you all think?
>
>
>
> Bill
>
>
>
>
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/000501d81198%249fc18270%24df448750%24%40mmnet.com.au
> <https://groups.google.com/d/msgid/legacy-ornamental-mills/000501d81198%249fc18270%24df448750%24%40mmnet.com.au?utm_medium=email&utm_source=footer>
> .
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLEsdkCCg-Nisb6Lpjj40%3DN4djMkivdm0s3fgDFFo8x7ug%40mail.gmail.com
> <https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLEsdkCCg-Nisb6Lpjj40%3DN4djMkivdm0s3fgDFFo8x7ug%40mail.gmail.com?utm_medium=email&utm_source=footer>
> .
>
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/001b01d8119e%244eb417c0%24ec1c4740%24%40mmnet.com.au
> <https://groups.google.com/d/msgid/legacy-ornamental-mills/001b01d8119e%244eb417c0%24ec1c4740%24%40mmnet.com.au?utm_medium=email&utm_source=footer>
> .
>
>
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/0ff5649c-2ac5-fa4d-8b7f-b7cde5a659ee%40earthlink.net
> <https://groups.google.com/d/msgid/legacy-ornamental-mills/0ff5649c-2ac5-fa4d-8b7f-b7cde5a659ee%40earthlink.net?utm_medium=email&utm_source=footer>
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLFUBSzOVDCKzMQjr%2BBZdzrrda58E2%3D7ntkuYZS8ttb3HQ%40mail.gmail.com.

Re: vacuum flask blank

2022-01-25 Thread Tim Ziegler 
Oh yeah and now your talking my language.
let me know if you find one I'd like to see them.

Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Mon, Jan 24, 2022 at 9:48 PM  wrote:

> Well the blank goes inside the wood you mill or turn, you know me I’m
> always making something different, imagine out ice fishing and you pull out
> your wooden spiralled  vacuum flask and pour out a nice hot coffee 😊
>
>
>
> Bill
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Tim Ziegler
> *Sent:* Tuesday, 25 January 2022 2:22 PM
> *To:* LOM Group 
> *Subject:* Re: vacuum flask blank
>
>
>
> Boy not sure  on that one Bill. We can get tumbler's to engrave but not
> aware of
>
> blanks to turn.
>
>
> Kind Regards,
>
>
>
> Timothy J. Ziegler
>
> Ziegler WoodWork & Specialty
>
> 14171 160th Ave.
>
> Foreston MN 56330
>
>
>
> 320-294-5798 shop
>
> 320-630-2243 cell
>
>
>
>
>
> On Mon, Jan 24, 2022 at 9:11 PM  wrote:
>
> Ok guys is there such a thing out there as a vacuum flask blank
>
> To turn or mill up a wooden vacuum flask like you can get
>
> For making a wood travel mug I been looking and I cant find anything maybe
>
> Such a thing does not exist what do you all think?
>
>
>
> Bill
>
>
>
>
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/000501d81198%249fc18270%24df448750%24%40mmnet.com.au
> <https://groups.google.com/d/msgid/legacy-ornamental-mills/000501d81198%249fc18270%24df448750%24%40mmnet.com.au?utm_medium=email&utm_source=footer>
> .
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLEsdkCCg-Nisb6Lpjj40%3DN4djMkivdm0s3fgDFFo8x7ug%40mail.gmail.com
> <https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLEsdkCCg-Nisb6Lpjj40%3DN4djMkivdm0s3fgDFFo8x7ug%40mail.gmail.com?utm_medium=email&utm_source=footer>
> .
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/001b01d8119e%244eb417c0%24ec1c4740%24%40mmnet.com.au
> <https://groups.google.com/d/msgid/legacy-ornamental-mills/001b01d8119e%244eb417c0%24ec1c4740%24%40mmnet.com.au?utm_medium=email&utm_source=footer>
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLHFObHxfgNGcijH6jD8H%2Bx455y1CR5KuRLS6n9UO5n71A%40mail.gmail.com.

RE: vacuum flask blank

2022-01-24 Thread bulkeley 
You aren’t kidding mac my god that’s cold I cant even imagine that cold

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of M.W.Foscue
Sent: Tuesday, 25 January 2022 3:10 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: RE: vacuum flask blank

 

 

Bill,

 

Ya better have some good Aquavit - like Aalborg's - to put in that coffee or 
you'll FREEZE to death in Tim's neck of the woods right now! It is 6º F below 
Zero right now (- 6ºF)!   🥶

 

LoL!

Mac

  _  

-Original Message-
From: mailto:legacy-ornamental-mills@googlegroups.com> >
Sent: Jan 24, 2022 10:47 PM
To: mailto:legacy-ornamental-mills@googlegroups.com> >
Subject: RE: vacuum flask blank

 

Well the blank goes inside the wood you mill or turn, you know me I’m always 
making something different, imagine out ice fishing and you pull out your 
wooden spiralled vacuum flask and pour out a nice hot coffee 😊

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
<mailto:legacy-ornamental-mills@googlegroups.com>  
mailto:legacy-ornamental-mills@googlegroups.com> > On Behalf Of Tim Ziegler
Sent: Tuesday, 25 January 2022 2:22 PM
To: LOM Group mailto:legacy-ornamental-mills@googlegroups.com> >
Subject: Re: vacuum flask blank

 

Boy not sure  on that one Bill. We can get tumbler's to engrave but not aware 
of 

blanks to turn. 

 

Kind Regards,

 

Timothy J. Ziegler

Ziegler WoodWork & Specialty

14171 160th Ave.

Foreston MN 56330

 

320-294-5798 shop

320-630-2243 cell

 

 

On Mon, Jan 24, 2022 at 9:11 PM mailto:bulke...@mmnet.com.au> > wrote:

Ok guys is there such a thing out there as a vacuum flask blank

To turn or mill up a wooden vacuum flask like you can get

For making a wood travel mug I been looking and I cant find anything maybe 

Such a thing does not exist what do you all think?

 

Bill

 

 

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
<mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/000501d81198%249fc18270%24df448750%24%40mmnet.com.au
 
<https://groups.google.com/d/msgid/legacy-ornamental-mills/000501d81198%249fc18270%24df448750%24%40mmnet.com.au?utm_medium=email&utm_source=footer>
 .

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
<mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLEsdkCCg-Nisb6Lpjj40%3DN4djMkivdm0s3fgDFFo8x7ug%40mail.gmail.com
 
<https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLEsdkCCg-Nisb6Lpjj40%3DN4djMkivdm0s3fgDFFo8x7ug%40mail.gmail.com?utm_medium=email&utm_source=footer>
 .

 

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
<mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/001b01d8119e%244eb417c0%24ec1c4740%24%40mmnet.com.au
 
<https://groups.google.com/d/msgid/legacy-ornamental-mills/001b01d8119e%244eb417c0%24ec1c4740%24%40mmnet.com.au?utm_medium=email&utm_source=footer>
 .

 

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
<mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/0ff5649c-2ac5-fa4d-8b7f-b7cde5a659ee%40earthlink.net
 
<https://groups.google.com/d/msgid/legacy-ornamental-mills/0ff5649c-2ac5-fa4d-8b7f-b7cde5a659ee%40earthlink.net?utm_medium=email&utm_source=footer>
 .

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/000801d811a6%24c9963f60%245cc2be20%24%40mmnet.com.au.

RE: vacuum flask blank

2022-01-24 Thread M.W.Foscue 
Bill,
I attached a screen grab of what we, here, call a flask.
Front to back it is only about 1". Usually only about 4 to 6 inches tall, if 
that;and about 4" wide.
They were designed to allow one to "sneak" alcohol into venues when alcohol was 
not allowed - and later when alcohol got expensive.
 
The tumblers you & I have been describing are esentially worthless for what you 
and I want them for - keep our beverage hot or cold.  If you have a non-vacuum 
tumbler, you may as well use a Red Dixie Cup!
 
Cheers!
Mac
-Original Message-
From: 
Sent: Jan 24, 2022 11:02 PM
To: 
Subject: RE: vacuum flask blank
 
I can buy the rockler one here I don’t like it much wont hold the heat or the 
cold in that’s why I want a vacuum tumbler as you call it we say flask.
 
Bill
 
From: legacy-ornamental-mills@googlegroups.com  On Behalf Of M.W.Foscue
Sent: Tuesday, 25 January 2022 2:45 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: vacuum flask blank

 
Bill,
 
Woodcraft used to sell them as a "kit".  Hads a stainless inner "liner" and a 
prepared wood "sleeve" that you'd sand, stain, finish, and assemble. 
Note: Pretty sure it was NOT a vacuum tumbler - so wasn't much good for keeping 
hot stuff hot and cold stuff cold. 
 
I think I saw them in a sale around Black Friday - in a "Clearance" sale?  So 
they may not have them anymore.
 
In any case check Woodcraft, Rockler, Woodworkers' Supply, and others.
Mac



-Original Message-----
From: 
Sent: Jan 24, 2022 10:21 PM
To: LOM Group 
Subject: Re: vacuum flask blank
 
Boy not sure  on that one Bill. We can get tumbler's to engrave but not aware 
of 
blanks to turn. 

 
Kind Regards,
 

Timothy J. Ziegler

Ziegler WoodWork & Specialty

14171 160th Ave.

Foreston MN 56330

 

320-294-5798 shop

320-630-2243 cell






 
On Mon, Jan 24, 2022 at 9:11 PM  wrote:

Ok guys is there such a thing out there as a vacuum flask blank
To turn or mill up a wooden vacuum flask like you can get
For making a wood travel mug I been looking and I cant find anything maybe 
Such a thing does not exist what do you all think?
 
Bill
 
 


 
-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
(mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com).
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/000501d81198%249fc18270%24df448750%24%40mmnet.com.au.

 
-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
(mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com).
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLEsdkCCg-Nisb6Lpjj40%3DN4djMkivdm0s3fgDFFo8x7ug%40mail.gmail.com.

 
-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
(mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com).
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/12eaa709-29e0-504f-d9c9-94cd47ffb6d8%40earthlink.net.

 
-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
(mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com).
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/002f01d811a0%2465eadd00%2431c09700%24%40mmnet.com.au.
 

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/09a54479-6f4a-2df9-9c5b-694c3682a26a%40earthlink.net.

RE: vacuum flask blank

2022-01-24 Thread M.W.Foscue 
 
Bill,
 
Ya better have some good Aquavit - like Aalborg's - to put in that coffee or 
you'll FREEZE to death in Tim's neck of the woods right now! It is 6º F below 
Zero right now (- 6ºF)!   🥶
 
LoL!
Mac
-Original Message-
From: 
Sent: Jan 24, 2022 10:47 PM
To: 
Subject: RE: vacuum flask blank
 
Well the blank goes inside the wood you mill or turn, you know me I’m always 
making something different, imagine out ice fishing and you pull out your 
wooden spiralled vacuum flask and pour out a nice hot coffee 😊
 
Bill
 
From: legacy-ornamental-mills@googlegroups.com  On Behalf Of Tim Ziegler
Sent: Tuesday, 25 January 2022 2:22 PM
To: LOM Group 
Subject: Re: vacuum flask blank

 
Boy not sure  on that one Bill. We can get tumbler's to engrave but not aware 
of 
blanks to turn. 

 
Kind Regards,
 

Timothy J. Ziegler

Ziegler WoodWork & Specialty

14171 160th Ave.

Foreston MN 56330

 

320-294-5798 shop

320-630-2243 cell




 


 
On Mon, Jan 24, 2022 at 9:11 PM  wrote:

Ok guys is there such a thing out there as a vacuum flask blank
To turn or mill up a wooden vacuum flask like you can get
For making a wood travel mug I been looking and I cant find anything maybe 
Such a thing does not exist what do you all think?
 
Bill
 
 


-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
(mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com).
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/000501d81198%249fc18270%24df448750%24%40mmnet.com.au.

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
(mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com).
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLEsdkCCg-Nisb6Lpjj40%3DN4djMkivdm0s3fgDFFo8x7ug%40mail.gmail.com.

 
-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
(mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com).
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/001b01d8119e%244eb417c0%24ec1c4740%24%40mmnet.com.au.
 

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/0ff5649c-2ac5-fa4d-8b7f-b7cde5a659ee%40earthlink.net.

RE: vacuum flask blank

2022-01-24 Thread bulkeley 
I can buy the rockler one here I don’t like it much wont hold the heat or the 
cold in that’s why I want a vacuum tumbler as you call it we say flask.

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of M.W.Foscue
Sent: Tuesday, 25 January 2022 2:45 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: vacuum flask blank

 

Bill,

 

Woodcraft used to sell them as a "kit".  Hads a stainless inner "liner" and a 
prepared wood "sleeve" that you'd sand, stain, finish, and assemble. 

Note: Pretty sure it was NOT a vacuum tumbler - so wasn't much good for keeping 
hot stuff hot and cold stuff cold. 

 

I think I saw them in a sale around Black Friday - in a "Clearance" sale?  So 
they may not have them anymore.

 

In any case check Woodcraft, Rockler, Woodworkers' Supply, and others.

Mac

  _  

  _  

-Original Message-
From: mailto:legacy-ornamental-mills@googlegroups.com> >
Sent: Jan 24, 2022 10:21 PM
To: LOM Group mailto:legacy-ornamental-mills@googlegroups.com> >
Subject: Re: vacuum flask blank

 

Boy not sure  on that one Bill. We can get tumbler's to engrave but not aware 
of  

blanks to turn. 




Kind Regards, 

 

Timothy J. Ziegler

Ziegler WoodWork & Specialty

14171 160th Ave.

Foreston MN 56330

 

320-294-5798 shop

320-630-2243 cell

 

On Mon, Jan 24, 2022 at 9:11 PM mailto:bulke...@mmnet.com.au> > wrote:

Ok guys is there such a thing out there as a vacuum flask blank

To turn or mill up a wooden vacuum flask like you can get

For making a wood travel mug I been looking and I cant find anything maybe 

Such a thing does not exist what do you all think?

 

Bill

 

 

 

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
<mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/000501d81198%249fc18270%24df448750%24%40mmnet.com.au
 
<https://groups.google.com/d/msgid/legacy-ornamental-mills/000501d81198%249fc18270%24df448750%24%40mmnet.com.au?utm_medium=email&utm_source=footer>
 .

 

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
<mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLEsdkCCg-Nisb6Lpjj40%3DN4djMkivdm0s3fgDFFo8x7ug%40mail.gmail.com
 
<https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLEsdkCCg-Nisb6Lpjj40%3DN4djMkivdm0s3fgDFFo8x7ug%40mail.gmail.com?utm_medium=email&utm_source=footer>
 .

 

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
<mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/12eaa709-29e0-504f-d9c9-94cd47ffb6d8%40earthlink.net
 
<https://groups.google.com/d/msgid/legacy-ornamental-mills/12eaa709-29e0-504f-d9c9-94cd47ffb6d8%40earthlink.net?utm_medium=email&utm_source=footer>
 .

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/002f01d811a0%2465eadd00%2431c09700%24%40mmnet.com.au.

RE: vacuum flask blank

2022-01-24 Thread bulkeley 
Well the blank goes inside the wood you mill or turn, you know me I’m always 
making something different, imagine out ice fishing and you pull out your 
wooden spiralled  vacuum flask and pour out a nice hot coffee 😊

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of Tim Ziegler
Sent: Tuesday, 25 January 2022 2:22 PM
To: LOM Group 
Subject: Re: vacuum flask blank

 

Boy not sure  on that one Bill. We can get tumbler's to engrave but not aware 
of 

blanks to turn. 




Kind Regards,

 

Timothy J. Ziegler

Ziegler WoodWork & Specialty

14171 160th Ave.

Foreston MN 56330

 

320-294-5798 shop

320-630-2243 cell

 

 

On Mon, Jan 24, 2022 at 9:11 PM mailto:bulke...@mmnet.com.au> > wrote:

Ok guys is there such a thing out there as a vacuum flask blank

To turn or mill up a wooden vacuum flask like you can get

For making a wood travel mug I been looking and I cant find anything maybe 

Such a thing does not exist what do you all think?

 

Bill

 

 

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
<mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/000501d81198%249fc18270%24df448750%24%40mmnet.com.au
 
<https://groups.google.com/d/msgid/legacy-ornamental-mills/000501d81198%249fc18270%24df448750%24%40mmnet.com.au?utm_medium=email&utm_source=footer>
 .

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
<mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLEsdkCCg-Nisb6Lpjj40%3DN4djMkivdm0s3fgDFFo8x7ug%40mail.gmail.com
 
<https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLEsdkCCg-Nisb6Lpjj40%3DN4djMkivdm0s3fgDFFo8x7ug%40mail.gmail.com?utm_medium=email&utm_source=footer>
 .

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/001b01d8119e%244eb417c0%24ec1c4740%24%40mmnet.com.au.

Re: vacuum flask blank

2022-01-24 Thread M.W.Foscue 
Bill,
 
Woodcraft used to sell them as a "kit".  Hads a stainless inner "liner" and a 
prepared wood "sleeve" that you'd sand, stain, finish, and assemble. 
Note: Pretty sure it was NOT a vacuum tumbler - so wasn't much good for keeping 
hot stuff hot and cold stuff cold. 
 
I think I saw them in a sale around Black Friday - in a "Clearance" sale?  So 
they may not have them anymore.
 
In any case check Woodcraft, Rockler, Woodworkers' Supply, and others.
Mac
-Original Message-
From: 
Sent: Jan 24, 2022 10:21 PM
To: LOM Group 
Subject: Re: vacuum flask blank
 
Boy not sure  on that one Bill. We can get tumbler's to engrave but not aware 
of blanks to turn. 
Kind Regards, 
Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330
 
320-294-5798 shop
320-630-2243 cell






On Mon, Jan 24, 2022 at 9:11 PM  wrote:
Ok guys is there such a thing out there as a vacuum flask blank
To turn or mill up a wooden vacuum flask like you can get
For making a wood travel mug I been looking and I cant find anything maybe 
Such a thing does not exist what do you all think?
 
Bill
 
 


 
-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
(mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com).
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/000501d81198%249fc18270%24df448750%24%40mmnet.com.au.
 
-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
(mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com).
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLEsdkCCg-Nisb6Lpjj40%3DN4djMkivdm0s3fgDFFo8x7ug%40mail.gmail.com.
 

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/12eaa709-29e0-504f-d9c9-94cd47ffb6d8%40earthlink.net.

Re: vacuum flask blank

2022-01-24 Thread Tim Ziegler 
Boy not sure  on that one Bill. We can get tumbler's to engrave but not
aware of
blanks to turn.

Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Mon, Jan 24, 2022 at 9:11 PM  wrote:

> Ok guys is there such a thing out there as a vacuum flask blank
>
> To turn or mill up a wooden vacuum flask like you can get
>
> For making a wood travel mug I been looking and I cant find anything maybe
>
> Such a thing does not exist what do you all think?
>
>
>
> Bill
>
>
>
>
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/000501d81198%249fc18270%24df448750%24%40mmnet.com.au
> 
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLEsdkCCg-Nisb6Lpjj40%3DN4djMkivdm0s3fgDFFo8x7ug%40mail.gmail.com.