Re: A roped Wooden handle.
Can't wait...geterdone! On Apr 21, 2015 9:34 PM, CURTIS GEORGE curtgeo...@wowway.com wrote: I just need some more time. But I promise you will see it. C.A.G. -- *From: *Dewell Crews funk49...@gmail.com *To: *legacy-ornamental-mills@googlegroups.com *Sent: *Wednesday, April 22, 2015 12:30:28 AM *Subject: *Re: A roped Wooden handle. Ok. Looking forward to seeing it. On Apr 21, 2015 9:29 PM, CURTIS GEORGE curtgeo...@wowway.com wrote: Hello Dewell. I should be ready to show all in a few days, Depending on my work load. I need time to finish my project before I show it off. ;-) C.A.G. -- *From: *Dewell Crews funk49...@gmail.com *To: *legacy-ornamental-mills@googlegroups.com *Sent: *Wednesday, April 22, 2015 12:16:41 AM *Subject: *A roped Wooden handle. What in the world is that machine? -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to a topic in the Google Groups Legacy Ornamental Mills group. To unsubscribe from this topic, visit https://groups.google.com/d/topic/legacy-ornamental-mills/57lm0pli5WI/unsubscribe . To unsubscribe from this group and all its topics, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills . For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to a topic in the Google Groups Legacy Ornamental Mills group. To unsubscribe from this topic, visit https://groups.google.com/d/topic/legacy-ornamental-mills/57lm0pli5WI/unsubscribe . To unsubscribe from this group and all its topics, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills . For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout.
Re: A roped Wooden handle.
Hello Dewell. I should be ready to show all in a few days, Depending on my work load. I need time to finish my project before I show it off. ;-) C.A.G. - Original Message - From: Dewell Crews funk49...@gmail.com To: legacy-ornamental-mills@googlegroups.com Sent: Wednesday, April 22, 2015 12:16:41 AM Subject: A roped Wooden handle. What in the world is that machine? -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout.
Re: A roped Wooden handle.
I just need some more time. But I promise you will see it. C.A.G. - Original Message - From: Dewell Crews funk49...@gmail.com To: legacy-ornamental-mills@googlegroups.com Sent: Wednesday, April 22, 2015 12:30:28 AM Subject: Re: A roped Wooden handle. Ok. Looking forward to seeing it. On Apr 21, 2015 9:29 PM, CURTIS GEORGE curtgeo...@wowway.com wrote: Hello Dewell. I should be ready to show all in a few days, Depending on my work load. I need time to finish my project before I show it off. ;-) C.A.G. From: Dewell Crews funk49...@gmail.com To: legacy-ornamental-mills@googlegroups.com Sent: Wednesday, April 22, 2015 12:16:41 AM Subject: A roped Wooden handle. What in the world is that machine? -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com . To post to this group, send email to legacy-ornamental-mills@googlegroups.com . Visit this group at http://groups.google.com/group/legacy-ornamental-mills . For more options, visit https://groups.google.com/d/optout . -- You received this message because you are subscribed to a topic in the Google Groups Legacy Ornamental Mills group. To unsubscribe from this topic, visit https://groups.google.com/d/topic/legacy-ornamental-mills/57lm0pli5WI/unsubscribe . To unsubscribe from this group and all its topics, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com . To post to this group, send email to legacy-ornamental-mills@googlegroups.com . Visit this group at http://groups.google.com/group/legacy-ornamental-mills . For more options, visit https://groups.google.com/d/optout . -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com . To post to this group, send email to legacy-ornamental-mills@googlegroups.com . Visit this group at http://groups.google.com/group/legacy-ornamental-mills . For more options, visit https://groups.google.com/d/optout . -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout.
Re: A roped Wooden handle.
Hello Tom My jig is not yet done, I will share it with all. but not at this time. I am sorry. C.A.G. - Original Message - From: Tom Dotta ted...@gmail.com To: legacy-ornamental-mills@googlegroups.com Sent: Sunday, April 19, 2015 11:36:43 AM Subject: Re: A roped Wooden handle. Good Morning Curtis Nice bit of work however I'm more fascinated by the indexing mechanism which looks really cool.Any chance for a picture of the whole rig? TNX Tom Dotta On Sun, Apr 19, 2015 at 7:20 AM, CURTIS GEORGE curtgeo...@wowway.com wrote: Hello and Good morning Bill I will be honest with you, the 1/4 pitch (a custom made gear that I had made a while back...) was suppose to be a single start, I figured that it would be faster... but after the first cut it looked wrong for what I wanted (It was to thread like,close and I just did not like the look.), so I decided to try making a second start just off the first one, perhaps it would make it look more open?( though to my self.) Well It worked. All that I did was to set the router back into the grove it made on the first pass, and then move the carriage up one thread on the acme lead screw. When Life hands you a Lemon, Make Lemonade. Is how I think of it. ;-) Have a great day. C.A.G. From: Bill Bulkeley bulke...@mmnet.com.au To: legacy-ornamental-mills@googlegroups.com Sent: Saturday, April 18, 2015 10:42:24 PM Subject: RE: A roped Wooden handle. Very interesting curt with a ½ inch cutter and 2 start I would normally do a 1 inch pitch so using ¼ of the pitch normally used It made a interesting spiral i have never seen that before looks good Bill From: legacy-ornamental-mills@googlegroups.com [mailto: legacy-ornamental-mills@googlegroups.com ] On Behalf Of CURTIS GEORGE Sent: Sunday, 19 April 2015 10:20 AM To: Legacy-Ornamental-Mills Subject: A roped Wooden handle. Hello Everyone. With all this pen turning stuff (topic's) that we have been taking about last week, got me thinking, why not do something a little different along the pen turning lines. Well here it is!Something a bit different. ;-) A roped wooden handle for a jig that I am making. The handle is 3/4 thick, Brazilian cherry . with a 3/8 steel shaft running through the wood, I used my 1/2 pen roping bit to make the wooden handle part, I used a 2 stat rope with a 1/4 pitch. I know this is not a big project, but after working a 10 hour day, at work,I needed to get out in the shop and escape form reality for at least a short time.and un-wind. I though it turned out well. and wanted to share with all of you. If anyone what's to know more, Please feel free to ask. talk to you all latter. C.A.G. -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com . To post to this group, send email to legacy-ornamental-mills@googlegroups.com . Visit this group at http://groups.google.com/group/legacy-ornamental-mills . For more options, visit https://groups.google.com/d/optout . -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com . To post to this group, send email to legacy-ornamental-mills@googlegroups.com . Visit this group at http://groups.google.com/group/legacy-ornamental-mills . For more options, visit https://groups.google.com/d/optout . -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com . To post to this group, send email to legacy-ornamental-mills@googlegroups.com . Visit this group at http://groups.google.com/group/legacy-ornamental-mills . For more options, visit https://groups.google.com/d/optout . -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com . To post to this group, send email to legacy-ornamental-mills@googlegroups.com . Visit this group at http://groups.google.com/group/legacy-ornamental-mills . For more options, visit https://groups.google.com/d/optout . -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http
Re: A roped Wooden handle.
I am with Tom on this , the handle is just eye candy, SHOW US the jig. On Sunday, April 19, 2015, Tom Dotta ted...@gmail.com wrote: Good Morning Curtis Nice bit of work however I'm more fascinated by the indexing mechanism which looks really cool.Any chance for a picture of the whole rig? TNX Tom Dotta On Sun, Apr 19, 2015 at 7:20 AM, CURTIS GEORGE curtgeo...@wowway.com javascript:_e(%7B%7D,'cvml','curtgeo...@wowway.com'); wrote: Hello and Good morning Bill I will be honest with you, the 1/4 pitch (a custom made gear that I had made a while back...) was suppose to be a single start, I figured that it would be faster... but after the first cut it looked wrong for what I wanted (It was to thread like,close and I just did not like the look.), so I decided to try making a second start just off the first one, perhaps it would make it look more open?( though to my self.) Well It worked. All that I did was to set the router back into the grove it made on the first pass, and then move the carriage up one thread on the acme lead screw. When Life hands you a Lemon, Make Lemonade. Is how I think of it. ;-) Have a great day. C.A.G. -- *From: *Bill Bulkeley bulke...@mmnet.com.au javascript:_e(%7B%7D,'cvml','bulke...@mmnet.com.au'); *To: *legacy-ornamental-mills@googlegroups.com javascript:_e(%7B%7D,'cvml','legacy-ornamental-mills@googlegroups.com'); *Sent: *Saturday, April 18, 2015 10:42:24 PM *Subject: *RE: A roped Wooden handle. Very interesting curt with a ½ inch cutter and 2 start I would normally do a 1 inch pitch so using ¼ of the pitch normally used It made a interesting spiral i have never seen that before looks good Bill *From:* legacy-ornamental-mills@googlegroups.com javascript:_e(%7B%7D,'cvml','legacy-ornamental-mills@googlegroups.com'); [mailto:legacy-ornamental-mills@googlegroups.com javascript:_e(%7B%7D,'cvml','legacy-ornamental-mills@googlegroups.com');] *On Behalf Of *CURTIS GEORGE *Sent:* Sunday, 19 April 2015 10:20 AM *To:* Legacy-Ornamental-Mills *Subject:* A roped Wooden handle. Hello Everyone. With all this pen turning stuff (topic's) that we have been taking about last week, got me thinking, why not do something a little different along the pen turning lines. Well here it is!Something a bit different. ;-) A roped wooden handle for a jig that I am making. The handle is 3/4 thick, Brazilian cherry . with a 3/8 steel shaft running through the wood, I used my 1/2 pen roping bit to make the wooden handle part, I used a 2 stat rope with a 1/4 pitch. I know this is not a big project, but after working a 10 hour day, at work,I needed to get out in the shop and escape form reality for at least a short time.and un-wind. I though it turned out well. and wanted to share with all of you. If anyone what's to know more, Please feel free to ask. talk to you all latter. C.A.G. -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com javascript:_e(%7B%7D,'cvml','legacy-ornamental-mills%2bunsubscr...@googlegroups.com'); . To post to this group, send email to legacy-ornamental-mills@googlegroups.com javascript:_e(%7B%7D,'cvml','legacy-ornamental-mills@googlegroups.com'); . Visit this group at http://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com javascript:_e(%7B%7D,'cvml','legacy-ornamental-mills%2bunsubscr...@googlegroups.com'); . To post to this group, send email to legacy-ornamental-mills@googlegroups.com javascript:_e(%7B%7D,'cvml','legacy-ornamental-mills@googlegroups.com'); . Visit this group at http://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com javascript:_e(%7B%7D,'cvml','legacy-ornamental-mills%2bunsubscr...@googlegroups.com'); . To post to this group, send email to legacy-ornamental-mills@googlegroups.com javascript:_e(%7B%7D,'cvml','legacy-ornamental-mills@googlegroups.com'); . Visit this group at http://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group
Re: A roped Wooden handle.
Hello and Good morning Bill I will be honest with you, the 1/4 pitch (a custom made gear that I had made a while back...) was suppose to be a single start, I figured that it would be faster... but after the first cut it looked wrong for what I wanted (It was to thread like,close and I just did not like the look.), so I decided to try making a second start just off the first one, perhaps it would make it look more open?( though to my self.) Well It worked. All that I did was to set the router back into the grove it made on the first pass, and then move the carriage up one thread on the acme lead screw. When Life hands you a Lemon, Make Lemonade. Is how I think of it. ;-) Have a great day. C.A.G. - Original Message - From: Bill Bulkeley bulke...@mmnet.com.au To: legacy-ornamental-mills@googlegroups.com Sent: Saturday, April 18, 2015 10:42:24 PM Subject: RE: A roped Wooden handle. Very interesting curt with a ½ inch cutter and 2 start I would normally do a 1 inch pitch so using ¼ of the pitch normally used It made a interesting spiral i have never seen that before looks good Bill From: legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of CURTIS GEORGE Sent: Sunday, 19 April 2015 10:20 AM To: Legacy-Ornamental-Mills Subject: A roped Wooden handle. Hello Everyone. With all this pen turning stuff (topic's) that we have been taking about last week, got me thinking, why not do something a little different along the pen turning lines. Well here it is!Something a bit different. ;-) A roped wooden handle for a jig that I am making. The handle is 3/4 thick, Brazilian cherry . with a 3/8 steel shaft running through the wood, I used my 1/2 pen roping bit to make the wooden handle part, I used a 2 stat rope with a 1/4 pitch. I know this is not a big project, but after working a 10 hour day, at work,I needed to get out in the shop and escape form reality for at least a short time.and un-wind. I though it turned out well. and wanted to share with all of you. If anyone what's to know more, Please feel free to ask. talk to you all latter. C.A.G. -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com . To post to this group, send email to legacy-ornamental-mills@googlegroups.com . Visit this group at http://groups.google.com/group/legacy-ornamental-mills . For more options, visit https://groups.google.com/d/optout . -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com . To post to this group, send email to legacy-ornamental-mills@googlegroups.com . Visit this group at http://groups.google.com/group/legacy-ornamental-mills . For more options, visit https://groups.google.com/d/optout . -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout.
Re: A roped Wooden handle.
Good Morning Curtis Nice bit of work however I'm more fascinated by the indexing mechanism which looks really cool.Any chance for a picture of the whole rig? TNX Tom Dotta On Sun, Apr 19, 2015 at 7:20 AM, CURTIS GEORGE curtgeo...@wowway.com wrote: Hello and Good morning Bill I will be honest with you, the 1/4 pitch (a custom made gear that I had made a while back...) was suppose to be a single start, I figured that it would be faster... but after the first cut it looked wrong for what I wanted (It was to thread like,close and I just did not like the look.), so I decided to try making a second start just off the first one, perhaps it would make it look more open?( though to my self.) Well It worked. All that I did was to set the router back into the grove it made on the first pass, and then move the carriage up one thread on the acme lead screw. When Life hands you a Lemon, Make Lemonade. Is how I think of it. ;-) Have a great day. C.A.G. -- *From: *Bill Bulkeley bulke...@mmnet.com.au *To: *legacy-ornamental-mills@googlegroups.com *Sent: *Saturday, April 18, 2015 10:42:24 PM *Subject: *RE: A roped Wooden handle. Very interesting curt with a ½ inch cutter and 2 start I would normally do a 1 inch pitch so using ¼ of the pitch normally used It made a interesting spiral i have never seen that before looks good Bill *From:* legacy-ornamental-mills@googlegroups.com [mailto: legacy-ornamental-mills@googlegroups.com] *On Behalf Of *CURTIS GEORGE *Sent:* Sunday, 19 April 2015 10:20 AM *To:* Legacy-Ornamental-Mills *Subject:* A roped Wooden handle. Hello Everyone. With all this pen turning stuff (topic's) that we have been taking about last week, got me thinking, why not do something a little different along the pen turning lines. Well here it is!Something a bit different. ;-) A roped wooden handle for a jig that I am making. The handle is 3/4 thick, Brazilian cherry . with a 3/8 steel shaft running through the wood, I used my 1/2 pen roping bit to make the wooden handle part, I used a 2 stat rope with a 1/4 pitch. I know this is not a big project, but after working a 10 hour day, at work,I needed to get out in the shop and escape form reality for at least a short time.and un-wind. I though it turned out well. and wanted to share with all of you. If anyone what's to know more, Please feel free to ask. talk to you all latter. C.A.G. -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills . For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills . For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills . For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout.
Re: A roped Wooden handle.
I think the name of the rig should be Shop Smith Ornamental Jig or SS OJ kind of like a boat in Florida. LOL Nice looking keep up the good work. I noticed that cut would look nice on a pen as well. Mike OK On 4/18/2015 7:20 PM, CURTIS GEORGE wrote: Hello Everyone. With all this pen turning stuff (topic's) that we have been taking about last week, got me thinking, why not do something a little different along the pen turning lines. Well here it is!Something a bit different. ;-) A roped wooden handle for a jig that I am making. The handle is 3/4 thick, Brazilian cherry . with a 3/8 steel shaft running through the wood, I used my 1/2 pen roping bit to make the wooden handle part, I used a 2 stat rope with a 1/4 pitch. I know this is not a big project, but after working a 10 hour day, at work,I needed to get out in the shop and escape form reality for at least a short time.and un-wind. I though it turned out well. and wanted to share with all of you. If anyone what's to know more, Please feel free to ask. talk to you all latter. C.A.G. -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com mailto:legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout.
RE: A roped Wooden handle.
Very interesting curt with a ½ inch cutter and 2 start I would normally do a 1 inch pitch so using ¼ of the pitch normally used It made a interesting spiral i have never seen that before looks good Bill From: legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of CURTIS GEORGE Sent: Sunday, 19 April 2015 10:20 AM To: Legacy-Ornamental-Mills Subject: A roped Wooden handle. Hello Everyone. With all this pen turning stuff (topic's) that we have been taking about last week, got me thinking, why not do something a little different along the pen turning lines. Well here it is!Something a bit different. ;-) A roped wooden handle for a jig that I am making. The handle is 3/4 thick, Brazilian cherry . with a 3/8 steel shaft running through the wood, I used my 1/2 pen roping bit to make the wooden handle part, I used a 2 stat rope with a 1/4 pitch. I know this is not a big project, but after working a 10 hour day, at work,I needed to get out in the shop and escape form reality for at least a short time.and un-wind. I though it turned out well. and wanted to share with all of you. If anyone what's to know more, Please feel free to ask. talk to you all latter. C.A.G. -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout.