subject:"Re\: I'm in the Game\!"

Re: I'm in the Game!

2023-01-12 Thread Jeff Richmond

Nice looking machine 👍Jeff from Connecticut Sent from my iPhoneOn Jan 12, 2023, at 9:07 PM, Mike Newman  wrote:I was successful this week in finding a nice condition LOM 1200 that does not appear to be used much.  2nd owner said he bought it for table legs but then never really used it and needed space in his shop.   Price was right because it only had 1 drive gear.  It has the std index gear set, rotary table, 4 jaw chuck, casters, router.  Cleaned it up and adjusted things to run a test piece of walnut out of my scrap bin.  I threw a bowl bottom bit on it that I already had to round over the piece and then put a faint spiral on it to start to get a feel for the machine.  It ran/crank pretty smooth on the x/y axis.  Z is just the plunge for now, time will tell me if i want to go z-axis hunting in the future.  My DynaGlide showed up today so I'm good there.  Also talked to Cindy at Legacy and she had a set of drive gears on the shelf so they are already headed my way.  Hope to really play this weekend.  Also need to buy a few router bits for rope/barley twists.  I have decent collection of general bits already.  Also will be fabricating my own thin stock support for future use.  This group has been very helpful so far so thanks for that.



-- 
You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/ed7dbcdf-607a-4abc-a43f-beac232e3812n%40googlegroups.com.




-- 
You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/4F4E877A-BF38-4561-96DB-932471D24CEE%40gmail.com.

By chance did your purchase include an owner's manual? I have lost mine to
hungry rats and need one. If you could send me a copy, it would be deeply
appreciated. I would pay you for your time. Let me know.Thank you for your
time,Jim RussellVentura, Ca

On Thursday, January 12, 2023 at 06:42:28 PM PST, Jeff Richmond
wrote:

Nice looking machine 👍

Jeff from Connecticut
Sent from my iPhone

On Jan 12, 2023, at 9:07 PM, Mike Newman wrote:

I was successful this week in finding a nice condition LOM 1200 that does not
appear to be used much. 2nd owner said he bought it for table legs but then
never really used it and needed space in his shop. Price was right because it
only had 1 drive gear. It has the std index gear set, rotary table, 4 jaw
chuck, casters, router. Cleaned it up and adjusted things to run a test piece
of walnut out of my scrap bin. I threw a bowl bottom bit on it that I already
had to round over the piece and then put a faint spiral on it to start to get a
feel for the machine. It ran/crank pretty smooth on the x/y axis. Z is just
the plunge for now, time will tell me if i want to go z-axis hunting in the
future. My DynaGlide showed up today so I'm good there. Also talked to Cindy
at Legacy and she had a set of drive gears on the shelf so they are already
headed my way. Hope to really play this weekend. Also need to buy a few
router bits for rope/barley twists. I have decent collection of general bits
already. Also will be fabricating my own thin stock support for future use.
This group has been very helpful so far so thanks for that.

--
You received this message because you are subscribed to the Google Groups
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/legacy-ornamental-mills/ed7dbcdf-607a-4abc-a43f-beac232e3812n%40googlegroups.com.

Re: I'm in the Game!

2023-01-12 Thread Tim Ziegler

Hey Jim,

I am pretty sure you can download one right off the site. Let me check for
you.

Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Thu, Jan 12, 2023 at 9:38 PM Jim Russell  wrote:

> By chance did your purchase include an owner's manual? I have lost mine to
> hungry rats and need one. If you could send me a copy, it would be deeply
> appreciated. I would pay you for your time. Let me know.
> Thank you for your time,
> Jim Russell
> Ventura, Ca
>
> On Thursday, January 12, 2023 at 06:42:28 PM PST, Jeff Richmond <
> jtrichmo...@gmail.com> wrote:
>
>
> Nice looking machine 👍
>
>
> Jeff from Connecticut
> Sent from my iPhone
>
> On Jan 12, 2023, at 9:07 PM, Mike Newman  wrote:
>
> 
> I was successful this week in finding a nice condition LOM 1200 that does
> not appear to be used much.  2nd owner said he bought it for table legs but
> then never really used it and needed space in his shop.   Price was right
> because it only had 1 drive gear.  It has the std index gear set, rotary
> table, 4 jaw chuck, casters, router.  Cleaned it up and adjusted things to
> run a test piece of walnut out of my scrap bin.  I threw a bowl bottom bit
> on it that I already had to round over the piece and then put a faint
> spiral on it to start to get a feel for the machine.  It ran/crank pretty
> smooth on the x/y axis.  Z is just the plunge for now, time will tell me if
> i want to go z-axis hunting in the future.  My DynaGlide showed up today so
> I'm good there.  Also talked to Cindy at Legacy and she had a set of drive
> gears on the shelf so they are already headed my way.  Hope to really play
> this weekend.  Also need to buy a few router bits for rope/barley twists.
> I have decent collection of general bits already.  Also will be fabricating
> my own thin stock support for future use.  This group has been very helpful
> so far so thanks for that.
>
> 
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/ed7dbcdf-607a-4abc-a43f-beac232e3812n%40googlegroups.com
> 
> .
> 
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
>
> https://groups.google.com/d/msgid/legacy-ornamental-mills/4F4E877A-BF38-4561-96DB-932471D24CEE%40gmail.com
> 
> .
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/1803465520.461873.1673581091258%40mail.yahoo.com
> 
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLEiWpC%2B9bX62m5F5ZWLpBjV%2BswsgH6JP0UvmORXfsZivQ%40mail.gmail.com.

Re: I'm in the Game!

2023-01-12 Thread Tim Ziegler

Here you go click on this link and you should find all you need.

https://lwmcnc.com/cnc-systems/past-models/ornamental-mills/manuals/

Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Thu, Jan 12, 2023 at 9:38 PM Jim Russell  wrote:

> By chance did your purchase include an owner's manual? I have lost mine to
> hungry rats and need one. If you could send me a copy, it would be deeply
> appreciated. I would pay you for your time. Let me know.
> Thank you for your time,
> Jim Russell
> Ventura, Ca
>
> On Thursday, January 12, 2023 at 06:42:28 PM PST, Jeff Richmond <
> jtrichmo...@gmail.com> wrote:
>
>
> Nice looking machine 👍
>
>
> Jeff from Connecticut
> Sent from my iPhone
>
> On Jan 12, 2023, at 9:07 PM, Mike Newman  wrote:
>
> 
> I was successful this week in finding a nice condition LOM 1200 that does
> not appear to be used much.  2nd owner said he bought it for table legs but
> then never really used it and needed space in his shop.   Price was right
> because it only had 1 drive gear.  It has the std index gear set, rotary
> table, 4 jaw chuck, casters, router.  Cleaned it up and adjusted things to
> run a test piece of walnut out of my scrap bin.  I threw a bowl bottom bit
> on it that I already had to round over the piece and then put a faint
> spiral on it to start to get a feel for the machine.  It ran/crank pretty
> smooth on the x/y axis.  Z is just the plunge for now, time will tell me if
> i want to go z-axis hunting in the future.  My DynaGlide showed up today so
> I'm good there.  Also talked to Cindy at Legacy and she had a set of drive
> gears on the shelf so they are already headed my way.  Hope to really play
> this weekend.  Also need to buy a few router bits for rope/barley twists.
> I have decent collection of general bits already.  Also will be fabricating
> my own thin stock support for future use.  This group has been very helpful
> so far so thanks for that.
>
> 
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/ed7dbcdf-607a-4abc-a43f-beac232e3812n%40googlegroups.com
> 
> .
> 
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
>
> https://groups.google.com/d/msgid/legacy-ornamental-mills/4F4E877A-BF38-4561-96DB-932471D24CEE%40gmail.com
> 
> .
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/1803465520.461873.1673581091258%40mail.yahoo.com
> 
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLGQFKVLHRQxUaJYaqA4fsZ4i7gLaEemYnnyu7601yO4sw%40mail.gmail.com.

Re: I'm in the Game!

2023-01-12 Thread 'Curt George' via Legacy Ornamental Mills

Hello Everyone.
Jim about your manual, E-mail Tim Krause. He will help you out with the manual.
Mike. I am very happy for you. As far as your hold down table, Or thin stock
supports, I know you will be able to work something out.I've made a number of
different tables and supports over the years. (If I can do it, Anyone can do
it.)
Looking forward to hearing more.Have a good night.
C.A.G.On Thursday, January 12, 2023 at 11:08:54 PM EST, Jim Russell
wrote:

On Thursday, January 12, 2023 at 06:42:28 PM PST, Jeff Richmond
wrote:

Nice looking machine 👍

Jeff from Connecticut
Sent from my iPhone

On Jan 12, 2023, at 9:07 PM, Mike Newman wrote:

RE: I'm in the Game!

2023-01-12 Thread bulkeley

You can download a manual here on legacys sight

https://lwmcnc.com/cnc-systems/past-models/ornamental-mills/manuals/

 

Bill

 

 

From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of Jim Russell
Sent: Friday, 13 January 2023 2:38 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: I'm in the Game!

 

By chance did your purchase include an owner's manual? I have lost mine to 
hungry rats and need one. If you could send me a copy, it would be deeply 
appreciated. I would pay you for your time. Let me know.

Thank you for your time,

Jim Russell

Ventura, Ca

 

On Thursday, January 12, 2023 at 06:42:28 PM PST, Jeff Richmond 
mailto:jtrichmo...@gmail.com> > wrote: 

 

 

Nice looking machine 👍



Jeff from Connecticut 

Sent from my iPhone





On Jan 12, 2023, at 9:07 PM, Mike Newman mailto:mrnewma...@outlook.com> > wrote:



I was successful this week in finding a nice condition LOM 1200 that does not 
appear to be used much.  2nd owner said he bought it for table legs but then 
never really used it and needed space in his shop.   Price was right because it 
only had 1 drive gear.  It has the std index gear set, rotary table, 4 jaw 
chuck, casters, router.  Cleaned it up and adjusted things to run a test piece 
of walnut out of my scrap bin.  I threw a bowl bottom bit on it that I already 
had to round over the piece and then put a faint spiral on it to start to get a 
feel for the machine.  It ran/crank pretty smooth on the x/y axis.  Z is just 
the plunge for now, time will tell me if i want to go z-axis hunting in the 
future.  My DynaGlide showed up today so I'm good there.  Also talked to Cindy 
at Legacy and she had a set of drive gears on the shelf so they are already 
headed my way.  Hope to really play this weekend.  Also need to buy a few 
router bits for rope/barley twists.  I have decent collection of general bits 
already.  Also will be fabricating my own thin stock support for future use.  
This group has been very helpful so far so thanks for that.

 



 

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
<mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/ed7dbcdf-607a-4abc-a43f-beac232e3812n%40googlegroups.com
 
<https://groups.google.com/d/msgid/legacy-ornamental-mills/ed7dbcdf-607a-4abc-a43f-beac232e3812n%40googlegroups.com?utm_medium=email&utm_source=footer>
 .



-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
<mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> .
To view this discussion on the web visit 

https://groups.google.com/d/msgid/legacy-ornamental-mills/4F4E877A-BF38-4561-96DB-932471D24CEE%40gmail.com
 
<https://groups.google.com/d/msgid/legacy-ornamental-mills/4F4E877A-BF38-4561-96DB-932471D24CEE%40gmail.com?utm_medium=email&utm_source=footer>
 

.

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
<mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/1803465520.461873.1673581091258%40mail.yahoo.com
 
<https://groups.google.com/d/msgid/legacy-ornamental-mills/1803465520.461873.1673581091258%40mail.yahoo.com?utm_medium=email&utm_source=footer>
 .

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/000f01d9270f%24e03431d0%24a09c9570%24%40mmnet.com.au.

Re: I'm in the Game!

2023-01-13 Thread Tom B.C. Canada

Wow, that's a beauty Mike. congrats.  how many inches between the tilting 
bed rails?
Could you post a closer pic of the chuck?
thanks
Tom

On Thursday, January 12, 2023 at 9:28:38 PM UTC-8 aussiman wrote:

> You can download a manual here on legacys sight
>
> https://lwmcnc.com/cnc-systems/past-models/ornamental-mills/manuals/
>
>  
>
> Bill
>
>  
>
>  
>
> *From:* legacy-orna...@googlegroups.com  *On 
> Behalf Of *Jim Russell
> *Sent:* Friday, 13 January 2023 2:38 PM
> *To:* legacy-orna...@googlegroups.com
> *Subject:* Re: I'm in the Game!
>
>  
>
> By chance did your purchase include an owner's manual? I have lost mine to 
> hungry rats and need one. If you could send me a copy, it would be deeply 
> appreciated. I would pay you for your time. Let me know.
>
> Thank you for your time,
>
> Jim Russell
>
> Ventura, Ca
>
>  
>
> On Thursday, January 12, 2023 at 06:42:28 PM PST, Jeff Richmond <
> jtric...@gmail.com> wrote: 
>
>  
>
>  
>
> Nice looking machine 👍
>
>
>
> Jeff from Connecticut 
>
> Sent from my iPhone
>
>
>
> On Jan 12, 2023, at 9:07 PM, Mike Newman  wrote:
>
> 
>
> I was successful this week in finding a nice condition LOM 1200 that does 
> not appear to be used much.  2nd owner said he bought it for table legs but 
> then never really used it and needed space in his shop.   Price was right 
> because it only had 1 drive gear.  It has the std index gear set, rotary 
> table, 4 jaw chuck, casters, router.  Cleaned it up and adjusted things to 
> run a test piece of walnut out of my scrap bin.  I threw a bowl bottom bit 
> on it that I already had to round over the piece and then put a faint 
> spiral on it to start to get a feel for the machine.  It ran/crank pretty 
> smooth on the x/y axis.  Z is just the plunge for now, time will tell me if 
> i want to go z-axis hunting in the future.  My DynaGlide showed up today so 
> I'm good there.  Also talked to Cindy at Legacy and she had a set of drive 
> gears on the shelf so they are already headed my way.  Hope to really play 
> this weekend.  Also need to buy a few router bits for rope/barley twists.  
> I have decent collection of general bits already.  Also will be fabricating 
> my own thin stock support for future use.  This group has been very helpful 
> so far so thanks for that.
>
>  
>
> 
>
>  
>
> -- 
> You received this message because you are subscribed to the Google Groups 
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an 
> email to legacy-ornamental...@googlegroups.com.
> To view this discussion on the web visit 
> https://groups.google.com/d/msgid/legacy-ornamental-mills/ed7dbcdf-607a-4abc-a43f-beac232e3812n%40googlegroups.com
>  
> <https://groups.google.com/d/msgid/legacy-ornamental-mills/ed7dbcdf-607a-4abc-a43f-beac232e3812n%40googlegroups.com?utm_medium=email&utm_source=footer>
> .
>
> 
>
> -- 
> You received this message because you are subscribed to the Google Groups 
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an 
> email to legacy-ornamental...@googlegroups.com.
> To view this discussion on the web visit 
>
>
> https://groups.google.com/d/msgid/legacy-ornamental-mills/4F4E877A-BF38-4561-96DB-932471D24CEE%40gmail.com
>  
> <https://groups.google.com/d/msgid/legacy-ornamental-mills/4F4E877A-BF38-4561-96DB-932471D24CEE%40gmail.com?utm_medium=email&utm_source=footer>
>
> .
>
> -- 
> You received this message because you are subscribed to the Google Groups 
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an 
> email to legacy-ornamental...@googlegroups.com.
>
> To view this discussion on the web visit 
> https://groups.google.com/d/msgid/legacy-ornamental-mills/1803465520.461873.1673581091258%40mail.yahoo.com
>  
> <https://groups.google.com/d/msgid/legacy-ornamental-mills/1803465520.461873.1673581091258%40mail.yahoo.com?utm_medium=email&utm_source=footer>
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/0d4a6cda-87c1-4563-8e1a-b41ba4b9ae13n%40googlegroups.com.

Re: I'm in the Game!

2023-01-13 Thread Tim Ziegler

Thats what I sent him too Bill, Its all there might as well use it.

Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Thu, Jan 12, 2023 at 11:28 PM  wrote:

> You can download a manual here on legacys sight
>
> https://lwmcnc.com/cnc-systems/past-models/ornamental-mills/manuals/
>
>
>
> Bill
>
>
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Jim Russell
> *Sent:* Friday, 13 January 2023 2:38 PM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* Re: I'm in the Game!
>
>
>
> By chance did your purchase include an owner's manual? I have lost mine to
> hungry rats and need one. If you could send me a copy, it would be deeply
> appreciated. I would pay you for your time. Let me know.
>
> Thank you for your time,
>
> Jim Russell
>
> Ventura, Ca
>
>
>
> On Thursday, January 12, 2023 at 06:42:28 PM PST, Jeff Richmond <
> jtrichmo...@gmail.com> wrote:
>
>
>
>
>
> Nice looking machine 👍
>
>
>
> Jeff from Connecticut
>
> Sent from my iPhone
>
>
>
> On Jan 12, 2023, at 9:07 PM, Mike Newman  wrote:
>
> 
>
> I was successful this week in finding a nice condition LOM 1200 that does
> not appear to be used much.  2nd owner said he bought it for table legs but
> then never really used it and needed space in his shop.   Price was right
> because it only had 1 drive gear.  It has the std index gear set, rotary
> table, 4 jaw chuck, casters, router.  Cleaned it up and adjusted things to
> run a test piece of walnut out of my scrap bin.  I threw a bowl bottom bit
> on it that I already had to round over the piece and then put a faint
> spiral on it to start to get a feel for the machine.  It ran/crank pretty
> smooth on the x/y axis.  Z is just the plunge for now, time will tell me if
> i want to go z-axis hunting in the future.  My DynaGlide showed up today so
> I'm good there.  Also talked to Cindy at Legacy and she had a set of drive
> gears on the shelf so they are already headed my way.  Hope to really play
> this weekend.  Also need to buy a few router bits for rope/barley twists.
> I have decent collection of general bits already.  Also will be fabricating
> my own thin stock support for future use.  This group has been very helpful
> so far so thanks for that.
>
>
>
> 
>
>
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/ed7dbcdf-607a-4abc-a43f-beac232e3812n%40googlegroups.com
> <https://groups.google.com/d/msgid/legacy-ornamental-mills/ed7dbcdf-607a-4abc-a43f-beac232e3812n%40googlegroups.com?utm_medium=email&utm_source=footer>
> .
>
> 
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
>
>
> https://groups.google.com/d/msgid/legacy-ornamental-mills/4F4E877A-BF38-4561-96DB-932471D24CEE%40gmail.com
> <https://groups.google.com/d/msgid/legacy-ornamental-mills/4F4E877A-BF38-4561-96DB-932471D24CEE%40gmail.com?utm_medium=email&utm_source=footer>
>
> .
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/1803465520.461873.1673581091258%40mail.yahoo.com
> <https://groups.google.com/d/msgid/legacy-ornamental-mills/1803465520.461873.1673581091258%40mail.yahoo.com?utm_medium=email&utm_source=footer>
> .
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/000f01d9270f%24e03431d0%24a09c9570%24%40mmnet.com.au
> <https://groups.google.com

Re: I'm in the Game!

2023-01-13 Thread Tim Ziegler

That Chuck should be a VicMarc and are still available with adapter of
choice too.
Awesome chucks, I have one on my PW4224B lathe. and love it.

Heres a link for the VicMarc's
https://www.packardwoodworks.com/chuck-fourjaw-vm.html

Enjoy!

Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Fri, Jan 13, 2023 at 2:30 AM Tom B.C. Canada  wrote:

> Wow, that's a beauty Mike. congrats.  how many inches between the tilting
> bed rails?
> Could you post a closer pic of the chuck?
> thanks
> Tom
>
> On Thursday, January 12, 2023 at 9:28:38 PM UTC-8 aussiman wrote:
>
>> You can download a manual here on legacys sight
>>
>> https://lwmcnc.com/cnc-systems/past-models/ornamental-mills/manuals/
>>
>>
>>
>> Bill
>>
>>
>>
>>
>>
>> *From:* legacy-orna...@googlegroups.com 
>> *On Behalf Of *Jim Russell
>> *Sent:* Friday, 13 January 2023 2:38 PM
>> *To:* legacy-orna...@googlegroups.com
>> *Subject:* Re: I'm in the Game!
>>
>>
>>
>> By chance did your purchase include an owner's manual? I have lost mine
>> to hungry rats and need one. If you could send me a copy, it would be
>> deeply appreciated. I would pay you for your time. Let me know.
>>
>> Thank you for your time,
>>
>> Jim Russell
>>
>> Ventura, Ca
>>
>>
>>
>> On Thursday, January 12, 2023 at 06:42:28 PM PST, Jeff Richmond <
>> jtric...@gmail.com> wrote:
>>
>>
>>
>>
>>
>> Nice looking machine 👍
>>
>>
>>
>> Jeff from Connecticut
>>
>> Sent from my iPhone
>>
>>
>>
>> On Jan 12, 2023, at 9:07 PM, Mike Newman  wrote:
>>
>> 
>>
>> I was successful this week in finding a nice condition LOM 1200 that does
>> not appear to be used much.  2nd owner said he bought it for table legs but
>> then never really used it and needed space in his shop.   Price was right
>> because it only had 1 drive gear.  It has the std index gear set, rotary
>> table, 4 jaw chuck, casters, router.  Cleaned it up and adjusted things to
>> run a test piece of walnut out of my scrap bin.  I threw a bowl bottom bit
>> on it that I already had to round over the piece and then put a faint
>> spiral on it to start to get a feel for the machine.  It ran/crank pretty
>> smooth on the x/y axis.  Z is just the plunge for now, time will tell me if
>> i want to go z-axis hunting in the future.  My DynaGlide showed up today so
>> I'm good there.  Also talked to Cindy at Legacy and she had a set of drive
>> gears on the shelf so they are already headed my way.  Hope to really play
>> this weekend.  Also need to buy a few router bits for rope/barley twists.
>> I have decent collection of general bits already.  Also will be fabricating
>> my own thin stock support for future use.  This group has been very helpful
>> so far so thanks for that.
>>
>>
>>
>> 
>>
>>
>>
>> --
>> You received this message because you are subscribed to the Google Groups
>> "Legacy Ornamental Mills" group.
>> To unsubscribe from this group and stop receiving emails from it, send an
>> email to legacy-ornamental...@googlegroups.com.
>> To view this discussion on the web visit
>> https://groups.google.com/d/msgid/legacy-ornamental-mills/ed7dbcdf-607a-4abc-a43f-beac232e3812n%40googlegroups.com
>> <https://groups.google.com/d/msgid/legacy-ornamental-mills/ed7dbcdf-607a-4abc-a43f-beac232e3812n%40googlegroups.com?utm_medium=email&utm_source=footer>
>> .
>>
>> 
>>
>> --
>> You received this message because you are subscribed to the Google Groups
>> "Legacy Ornamental Mills" group.
>> To unsubscribe from this group and stop receiving emails from it, send an
>> email to legacy-ornamental...@googlegroups.com.
>> To view this discussion on the web visit
>>
>>
>> https://groups.google.com/d/msgid/legacy-ornamental-mills/4F4E877A-BF38-4561-96DB-932471D24CEE%40gmail.com
>> <https://groups.google.com/d/msgid/legacy-ornamental-mills/4F4E877A-BF38-4561-96DB-932471D24CEE%40gmail.com?utm_medium=email&utm_source=footer>
>>
>> .
>>
>> --
>> You received this message because you are subscribed to the Google Groups
>> "Legacy Ornamental Mills" group.
>> To unsubscribe from this group and stop receiving emails from it, send an
>> email to legacy-ornamental...@googlegroups.com.
>>
>> To view this discussion on the web visit
>>

Re: I'm in the Game!

2023-01-13 Thread Jeff Richmond

Nice. 👍 Sooner or later I will get one of those.Jeff from Connecticut Sent from my iPhoneOn Jan 13, 2023, at 6:45 AM, Tim Ziegler  wrote:That Chuck should be a VicMarc and are still available with adapter of choice too. Awesome chucks, I have one on my PW4224B lathe. and love it. Heres a link for the VicMarc's https://www.packardwoodworks.com/chuck-fourjaw-vm.htmlEnjoy!Kind Regards,Timothy J. ZieglerZiegler WoodWork & Specialty14171 160th Ave.Foreston MN 56330320-294-5798 shop320-630-2243 cellOn Fri, Jan 13, 2023 at 2:30 AM Tom  B.C. Canada <gold...@hotmail.com> wrote:Wow, that's a beauty Mike. congrats.  how many inches between the tilting bed rails?Could you post a closer pic of the chuck?thanksTomOn Thursday, January 12, 2023 at 9:28:38 PM UTC-8 aussiman wrote:You can download a manual here on legacys sighthttps://lwmcnc.com/cnc-systems/past-models/ornamental-mills/manuals/ Bill  From: legacy-orna...@googlegroups.com <legacy-orna...@googlegroups.com> On Behalf Of Jim RussellSent: Friday, 13 January 2023 2:38 PMTo: legacy-orna...@googlegroups.comSubject: Re: I'm in the Game! By chance did your purchase include an owner's manual? I have lost mine to hungry rats and need one. If you could send me a copy, it would be deeply appreciated. I would pay you for your time. Let me know.Thank you for your time,Jim RussellVentura, Ca On Thursday, January 12, 2023 at 06:42:28 PM PST, Jeff Richmond <jtric...@gmail.com> wrote:   Nice looking machine 👍Jeff from Connecticut Sent from my iPhoneOn Jan 12, 2023, at 9:07 PM, Mike Newman <mrnew...@outlook.com> wrote:I was successful this week in finding a nice condition LOM 1200 that does not appear to be used much.  2nd owner said he bought it for table legs but then never really used it and needed space in his shop.   Price was right because it only had 1 drive gear.  It has the std index gear set, rotary table, 4 jaw chuck, casters, router.  Cleaned it up and adjusted things to run a test piece of walnut out of my scrap bin.  I threw a bowl bottom bit on it that I already had to round over the piece and then put a faint spiral on it to start to get a feel for the machine.  It ran/crank pretty smooth on the x/y axis.  Z is just the plunge for now, time will tell me if i want to go z-axis hunting in the future.  My DynaGlide showed up today so I'm good there.  Also talked to Cindy at Legacy and she had a set of drive gears on the shelf so they are already headed my way.  Hope to really play this weekend.  Also need to buy a few router bits for rope/barley twists.  I have decent collection of general bits already.  Also will be fabricating my own thin stock support for future use.  This group has been very helpful so far so thanks for that.  -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group.To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental...@googlegroups.com.To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/ed7dbcdf-607a-4abc-a43f-beac232e3812n%40googlegroups.com.-- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group.To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental...@googlegroups.com.To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/4F4E877A-BF38-4561-96DB-932471D24CEE%40gmail.com.-- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group.To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental...@googlegroups.com.To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/1803465520.461873.1673581091258%40mail.yahoo.com.



-- 
You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/0d4a6cda-87c1-4563-8e1a-b41ba4b9ae13n%40googlegroups.com.




-- 
You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLEDxAMh2hTEC1nbpPUAFUDXaypsg4kczV7-OZp31dKCaw%40mail.gmail.com.




-- 
You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send

Re: I'm in the Game!

2023-01-13 Thread Tim Ziegler

Yup they are nice.

Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Fri, Jan 13, 2023 at 6:53 AM Jeff Richmond  wrote:

> Nice. 👍 Sooner or later I will get one of those.
>
> Jeff from Connecticut
> Sent from my iPhone
>
> On Jan 13, 2023, at 6:45 AM, Tim Ziegler  wrote:
>
> 
> That Chuck should be a VicMarc and are still available with adapter of
> choice too.
> Awesome chucks, I have one on my PW4224B lathe. and love it.
>
> Heres a link for the VicMarc's
> https://www.packardwoodworks.com/chuck-fourjaw-vm.html
>
> Enjoy!
>
> Kind Regards,
>
> Timothy J. Ziegler
> Ziegler WoodWork & Specialty
> 14171 160th Ave.
> Foreston MN 56330
>
> 320-294-5798 shop
> 320-630-2243 cell
>
>
> On Fri, Jan 13, 2023 at 2:30 AM Tom B.C. Canada 
> wrote:
>
>> Wow, that's a beauty Mike. congrats.  how many inches between the tilting
>> bed rails?
>> Could you post a closer pic of the chuck?
>> thanks
>> Tom
>>
>> On Thursday, January 12, 2023 at 9:28:38 PM UTC-8 aussiman wrote:
>>
>>> You can download a manual here on legacys sight
>>>
>>> https://lwmcnc.com/cnc-systems/past-models/ornamental-mills/manuals/
>>>
>>>
>>>
>>> Bill
>>>
>>>
>>>
>>>
>>>
>>> *From:* legacy-orna...@googlegroups.com 
>>> *On Behalf Of *Jim Russell
>>> *Sent:* Friday, 13 January 2023 2:38 PM
>>> *To:* legacy-orna...@googlegroups.com
>>> *Subject:* Re: I'm in the Game!
>>>
>>>
>>>
>>> By chance did your purchase include an owner's manual? I have lost mine
>>> to hungry rats and need one. If you could send me a copy, it would be
>>> deeply appreciated. I would pay you for your time. Let me know.
>>>
>>> Thank you for your time,
>>>
>>> Jim Russell
>>>
>>> Ventura, Ca
>>>
>>>
>>>
>>> On Thursday, January 12, 2023 at 06:42:28 PM PST, Jeff Richmond <
>>> jtric...@gmail.com> wrote:
>>>
>>>
>>>
>>>
>>>
>>> Nice looking machine 👍
>>>
>>>
>>>
>>> Jeff from Connecticut
>>>
>>> Sent from my iPhone
>>>
>>>
>>>
>>> On Jan 12, 2023, at 9:07 PM, Mike Newman  wrote:
>>>
>>> 
>>>
>>> I was successful this week in finding a nice condition LOM 1200 that
>>> does not appear to be used much.  2nd owner said he bought it for table
>>> legs but then never really used it and needed space in his shop.   Price
>>> was right because it only had 1 drive gear.  It has the std index gear set,
>>> rotary table, 4 jaw chuck, casters, router.  Cleaned it up and adjusted
>>> things to run a test piece of walnut out of my scrap bin.  I threw a bowl
>>> bottom bit on it that I already had to round over the piece and then put a
>>> faint spiral on it to start to get a feel for the machine.  It ran/crank
>>> pretty smooth on the x/y axis.  Z is just the plunge for now, time will
>>> tell me if i want to go z-axis hunting in the future.  My DynaGlide showed
>>> up today so I'm good there.  Also talked to Cindy at Legacy and she had a
>>> set of drive gears on the shelf so they are already headed my way.  Hope to
>>> really play this weekend.  Also need to buy a few router bits for
>>> rope/barley twists.  I have decent collection of general bits already.
>>> Also will be fabricating my own thin stock support for future use.  This
>>> group has been very helpful so far so thanks for that.
>>>
>>>
>>>
>>> 
>>>
>>>
>>>
>>> --
>>> You received this message because you are subscribed to the Google
>>> Groups "Legacy Ornamental Mills" group.
>>> To unsubscribe from this group and stop receiving emails from it, send
>>> an email to legacy-ornamental...@googlegroups.com.
>>> To view this discussion on the web visit
>>> https://groups.google.com/d/msgid/legacy-ornamental-mills/ed7dbcdf-607a-4abc-a43f-beac232e3812n%40googlegroups.com
>>> <https://groups.google.com/d/msgid/legacy-ornamental-mills/ed7dbcdf-607a-4abc-a43f-beac232e3812n%40googlegroups.com?utm_medium=email&utm_source=footer>
>>> .
>>>
>>> 
>>>
>>> --
>>> You received this message because you are subscribed to the Google
>>> Groups "Lega

Re: I'm in the Game!

2023-01-14 Thread Jim Russell

 Thank you, I'll put you on my Christmas card list!Jim

On Thursday, January 12, 2023 at 09:28:41 PM PST,  
wrote:  
 
 
You can download a manual here on legacys sight

https://lwmcnc.com/cnc-systems/past-models/ornamental-mills/manuals/

  

Bill

  

  

From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of Jim Russell
Sent: Friday, 13 January 2023 2:38 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: I'm in the Game!

  

By chance did your purchase include an owner's manual? I have lost mine to 
hungry rats and need one. If you could send me a copy, it would be deeply 
appreciated. I would pay you for your time. Let me know.

Thank you for your time,

Jim Russell

Ventura, Ca

  

On Thursday, January 12, 2023 at 06:42:28 PM PST, Jeff Richmond 
 wrote: 

  

  

Nice looking machine 👍



Jeff from Connecticut 

Sent from my iPhone






On Jan 12, 2023, at 9:07 PM, Mike Newman  wrote:





I was successful this week in finding a nice condition LOM 1200 that does not 
appear to be used much.  2nd owner said he bought it for table legs but then 
never really used it and needed space in his shop.   Price was right because it 
only had 1 drive gear.  It has the std index gear set, rotary table, 4 jaw 
chuck, casters, router.  Cleaned it up and adjusted things to run a test piece 
of walnut out of my scrap bin.  I threw a bowl bottom bit on it that I already 
had to round over the piece and then put a faint spiral on it to start to get a 
feel for the machine.  It ran/crank pretty smooth on the x/y axis.  Z is just 
the plunge for now, time will tell me if i want to go z-axis hunting in the 
future.  My DynaGlide showed up today so I'm good there.  Also talked to Cindy 
at Legacy and she had a set of drive gears on the shelf so they are already 
headed my way.  Hope to really play this weekend.  Also need to buy a few 
router bits for rope/barley twists.  I have decent collection of general bits 
already.  Also will be fabricating my own thin stock support for future use.  
This group has been very helpful so far so thanks for that.

  



  

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/ed7dbcdf-607a-4abc-a43f-beac232e3812n%40googlegroups.com.




-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 

https://groups.google.com/d/msgid/legacy-ornamental-mills/4F4E877A-BF38-4561-96DB-932471D24CEE%40gmail.com

.

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/1803465520.461873.1673581091258%40mail.yahoo.com.


-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/000f01d9270f%24e03431d0%24a09c9570%24%40mmnet.com.au.
  

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/1941620691.70926.1673589705148%40mail.yahoo.com.

Re: I'm in the Game!

2023-01-14 Thread 'Curt George' via Legacy Ornamental Mills

 ;-)   Thank you.
C.A.G.
On Saturday, January 14, 2023 at 02:07:01 PM EST, Jim Russell 
 wrote:  
 
  Thank you, I'll put you on my Christmas card list!Jim

On Thursday, January 12, 2023 at 09:28:41 PM PST,  
wrote:  
 
 
You can download a manual here on legacys sight

https://lwmcnc.com/cnc-systems/past-models/ornamental-mills/manuals/

  

Bill

  

  

From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of Jim Russell
Sent: Friday, 13 January 2023 2:38 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: I'm in the Game!

  

By chance did your purchase include an owner's manual? I have lost mine to 
hungry rats and need one. If you could send me a copy, it would be deeply 
appreciated. I would pay you for your time. Let me know.

Thank you for your time,

Jim Russell

Ventura, Ca

  

On Thursday, January 12, 2023 at 06:42:28 PM PST, Jeff Richmond 
 wrote: 

  

  

Nice looking machine 👍



Jeff from Connecticut 

Sent from my iPhone






On Jan 12, 2023, at 9:07 PM, Mike Newman  wrote:





I was successful this week in finding a nice condition LOM 1200 that does not 
appear to be used much.  2nd owner said he bought it for table legs but then 
never really used it and needed space in his shop.   Price was right because it 
only had 1 drive gear.  It has the std index gear set, rotary table, 4 jaw 
chuck, casters, router.  Cleaned it up and adjusted things to run a test piece 
of walnut out of my scrap bin.  I threw a bowl bottom bit on it that I already 
had to round over the piece and then put a faint spiral on it to start to get a 
feel for the machine.  It ran/crank pretty smooth on the x/y axis.  Z is just 
the plunge for now, time will tell me if i want to go z-axis hunting in the 
future.  My DynaGlide showed up today so I'm good there.  Also talked to Cindy 
at Legacy and she had a set of drive gears on the shelf so they are already 
headed my way.  Hope to really play this weekend.  Also need to buy a few 
router bits for rope/barley twists.  I have decent collection of general bits 
already.  Also will be fabricating my own thin stock support for future use.  
This group has been very helpful so far so thanks for that.

  



  

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/ed7dbcdf-607a-4abc-a43f-beac232e3812n%40googlegroups.com.




-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 

https://groups.google.com/d/msgid/legacy-ornamental-mills/4F4E877A-BF38-4561-96DB-932471D24CEE%40gmail.com

.

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/1803465520.461873.1673581091258%40mail.yahoo.com.


-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/000f01d9270f%24e03431d0%24a09c9570%24%40mmnet.com.au.
  

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/1941620691.70926.1673589705148%40mail.yahoo.com.
  

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/1943369475.865315.1673739981858%40mail.yahoo.com.

Re: I'm in the Game!

Re: I'm in the Game!

Re: I'm in the Game!

Re: I'm in the Game!

Re: I'm in the Game!

RE: I'm in the Game!

Re: I'm in the Game!

Re: I'm in the Game!

Re: I'm in the Game!

Re: I'm in the Game!

Re: I'm in the Game!

Re: I'm in the Game!

Re: I'm in the Game!

13 matches

Site Navigation

Mail list logo

Footer information